Search

We demonstrate a film-forming electrolyte additive that stabilises the LNMO cathode/electrolyte interface for rechargeable lithium-ion batteries.

The circular dichroism (CD) of a material is the difference in optical absorption under left- and right-circularly polarized illumination. It is crucial for a number of applications, from molecular sensing to the design of circularly polarized thermal light sources. The CD in natural materials is typically weak, leading to the exploitation of artificial chiral materials. Layered chiral woodpile structures are well known to boost chiro-optical effects when realized as a photonic crystal or an optical metamaterial. We here demonstrate that light scattering at a chiral plasmonic woodpile, which is structured on the order of the wavelength of the light, can be well understood by considering the fundamental evanescent Floquet states within the structure. In particular, we report a broadband circular polarization bandgap in the complex band structure of various plasmonic woodpiles that spans the optical transparency window of the atmosphere between 3 and 4 $$\upmu$$ μ m and leads to an average CD of up to 90% within this spectral range. Our findings could pave the way for an ultra-broadband circularly polarized thermal source.

The reinforcement of polymer nanocomposites can be achieved through alignment or percolation of cellulose nanocrystals (CNCs). Here, we compare the efficacy of these reinforcement mechanisms in thermoplastic polyurethane (PU) elastomer nanocomposites containing thermally stable cotton CNCs. CNC alignment was achieved by melt spinning nanocomposite fibers, while a percolating CNC network was generated by solvent casting nanocomposite films with CNC contents up to 20 wt %. While in films both the CNCs and the PU matrix were entirely isotropic at all concentrations as confirmed by wide-angle X-ray scattering and birefringence analysis, the CNCs in the fibers exhibited a preferential orientation, which improved with increasing CNC concentration. Increasing the CNC concentration in the fibers reduces, however, the alignment of the PU chains, resulting in an entirely isotropic PU matrix at high CNC contents. The mechanical properties of films and fibers were evaluated using stress-strain measurements. Nanocomposite fibers with low CNC content exhibited superior stiffness, extensibility, and strength compared to the films, while the films displayed superior mechanical properties at high CNC concentrations. These findings are rationalized using common semiempirical models describing the reinforcing effects of CNC alignment in fibers (Halpin-Tsai) and CNC percolation in films (percolation model). The formation of a percolating CNC network leads to a stronger reinforcement than CNC alignment, as the reinforcing effect of the latter is limited by the comparably low aspect ratio of CNCs extracted from cotton. As a consequence, above the percolation threshold for cotton CNCs, isotropic nanocomposite PU films show a higher stiffness than aligned nanocomposite PU fibers.

The spinel Li4Ti5O12 (LTO) is a promising lithium ion battery anode material with the potential to supplement graphite as an industry standard, but its low electrical conductivity and Li–ion diffusivity need to be overcome. Here, mesoporous LTO microspheres with carbon-coatings were formed by phase separation of a homopolymer from microphase-separated block copolymers of varying molar masses containing sol–gel precursors. Upon heating the composite underwent a sol–gel condensation reaction followed by the eventual pyrolysis of the polymer templates. The optimised mesoporous LTO microspheres demonstrated an excellent electrochemical performance with an excellent specific discharge capacity of 164 mA h g−1, 95% of which was retained after 1000 cycles at a C-rate of 10., The combination of block copolymer self-assembly and polymer phase separation with sol–gel chemistry enables the optimisation of Li4Ti5O12 (LTO) microspheres with size-tuneable carbon-coated mesopores, resulting in excellent electrochemical performance.

Creation of color through photonic morphologies manufactured by molecular self-assembly is a promising approach, but the complexity and lack of robustness of the fabrication processes have limited their technical exploitation. Here, it is shown that photonic spheres with full-color tuning across the entire visible spectrum can be readily and reliably achieved by the emulsification of solutions containing a block copolymer (BCP) and two swelling additives. Solvent diffusion out of the emulsion droplets gives rise to 20-150 µm-sized spheres with an onion-like lamellar morphology. Controlling the lamellar thickness by differential swelling with the two additives enables color tuning of the Bragg interference-based reflection band across the entire visible spectrum. By studying five different systems, a set of important principles for manufacturing photonic colloids is established. Two swelling additives are required, one of which must exhibit strong interactions with one of the BCP blocks. The additives should be chosen to enhance the dielectric contrast, and the formation kinetics of the spheres must be sufficiently slow to enable the emergence of the photonic morphology. The proposed approach is versatile and robust and allows the scalable production of photonic pigments with possible future applications in inks for cosmetics and arts, coatings, and displays.

The bright colors of Pachyrhynchus weevils originate from complex dielectric nanostructures within their elytral scales. In contrast to previous work exhibiting highly ordered single-network diamond-type photonic crystals, we here show by combining optical microscopy and spectroscopy measurements with 3D FIB tomography that the blue scales of P. congestus mirabilis differ from that of an ordered diamond structure. Through the use of FIB tomography on elytral scales filled with Pt by electron beam-assisted deposition, we reveal that the red scales of this weevil possess a periodic diamond structure, while the network morphology of the blue scales exhibit diamond morphology only on the single scattering unit level with disorder on longer length scales. Full wave simulations performed on the reconstructed volumes indicate that this local order is sufficient to open a partial photonic bandgap even at low dielectric constant contrast between chitin and air in the absence of long-range or translational order. The observation of disordered and ordered photonic crystals within a single organism opens up interesting questions on the cellular origin of coloration and studies on bio-inspired replication of angle-independent colors., 13 pages, 10 figures

A range of plants developed leaves, the surfaces of which prevent or diminish insect adhesion due to their microscopic topography. Well known examples include the leaves of the lychee tree (Litchi chinensis). Here, we report a method to coat substrates with ethyl cellulose microparticles that exhibit wrinkled surfaces, resulting in surface morphologies that closely resemble those of insect repelling plants, i.e., Litchi chinensis. The microparticles were prepared by electrospraying, a method that allowed tuning of the particle size and surface morphology. By measuring the traction forces of Colorado potato beetles walking on these surfaces, the wrinkly microsphere parameters were optimized, resulting in biomimetic surfaces that surpass the antiadhesive properties of the biological role model. This study may pave the way to sustainable, nontoxic insecticide replacements.

Fractionated crystallization (FC), a chain-sorting mechanism by length, is identified in well-defined, low molecular weight, and defect-free regioregular poly(3-hexylthiophene) by X-ray scattering and calorimetry of bulk samples. While wide-angle X-ray scattering (WAXS) qualitatively suggests that the degree of crystallinity is similar in all investigated samples, the melting enthalpies are largely different. We ascribe this to intricacies in the integration of the melting and crystallization peaks in calorimetric experiments, which is caused by FC occurring over a large temperature range. The extent of FC decreases with increasing molecular weight and increases with increasing polydispersity. The temperature-dependent investigation of the long period LP and the (100)-WAXS reflection of a sample in which FC is absent allows to disentangle effects from main-chain and side-chain crystallization.

More than three quarters of all animal species on Earth are insects, successfully inhabiting most ecosystems on the planet. Due to their opulence, insects provide the backbone of many biological processes, but also inflict adverse impacts on agricultural and stored products, buildings and human health. To countermeasure insect pests, the interactions of these animals with their surroundings have to be fully understood. This review focuses on the various forms of insect attachment, natural surfaces that have evolved to counter insect adhesion, and particularly features recently developed synthetic bio-inspired solutions. These bio-inspired solutions often enhance the variety of applicable mechanisms observed in nature and open paths for improved technological solutions that are needed in a changing global society.

Passivation and interlayer engineering are important approaches to increase the efficiency and stability of perovskite solar cells. Thin insulating dielectric films at the interface between the perovskite and the charge carrier transport layers have been suggested to passivate surface defects. Here, we analyze the effect of depositing poly(methyl methacrylate) (PMMA) from a very low-concentration solution. Spatial- and time-resolved photoluminescence and atomic force microscopy analyses of samples with diverse morphologies demonstrate the preferential deposition of PMMA in topographic depressions of the perovskite layer, such as grain and domain boundaries. This treatment results in an increase in the fill factor of more than 4% and an absolute efficiency boost exceeding 1%, with a maximum efficiency of 20.4%. Based on these results, we propose a physical isolation mechanism rather than a chemical passivation of perovskite defects, which explains not only the data of this study but also most results found in earlier works. This work was partially funded by a Swiss Government Excellence Scholarship (2017.1080) and by the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie project PerSisTanCe with grant agreement No. 841005 (E.O.M.). It also received financial support from the Swiss State Secretary for Education, Research and Innovation (SERI) under contract number 17.00105 (EMPIR project HyMet). The EMPIR programme is cofinanced by the Participating States and by the European Union’s Horizon 2020 research and innovation programme. E.O.M., R.D.O., P.F., and U.S. acknowledge financial support by the Adolphe Merkle Foundation. E.O.M.would like to thank Dr. Silver Hamill Turren-Cruz from Helmholtz-Zentrum Berlin for fruitful discussions and Dr. Jovana Milic from the University of Fribourg and Brian Carlsen from the Laboratory of Photomolecular Science (EPFL) for facilitating and carrying out stability measurements.

The recent introduction of organometal halide perovskites to solar cells has significantly enhanced the power conversion efficiency of alternative photovoltaic devices, revolutionizing the developm...

The self-assembly of a single layer of organic molecules on a substrate is a powerful strategy to modify surfaces and interfacial properties. Thiolates, silanes, phosphonates and carboxylates are widely used head-groups to link organic molecules to specific surfaces. In this study we show that self-assembly of perfluorododecyl iodide (I-PFC12) on a silicon nitride substrate leads to stable and highly compact monolayers of reproducible thickness (2.6 nm). Remarkably, the monolayers have the lowest ever reported surface energy of 2.6 mJ m(-2). The most likely mechanism leading to the formation of the monolayers is halogen bonding between the iodine in I-PFC12 and the nitrogen and oxygen atoms on the nitride. As a convenient, flexible and simple method, the self-assembly of halogen-bond driven perfluorocarbon monolayers is compatible with several applications, ranging from biosensing to electronics and microfluidics. Compared to other methods used to functionalise surfaces and interfaces, our procedure offers the unique advantage to work with extremely inert perfluorinated solvents. We demonstrate that surfaces commonly unstable in contact with many common organic solvents, such as organic-inorganic perovskites, can be functionalized via halogen bonding.

Compact self-assembled monolayers (SAMs) of perfluorododecyl iodide (I-PFC12) of reproducible thickness (1.2 nm) are shown to form on silicon wafers. The SAMs have a high fluorine content (95%) and convey an extremely low surface energy to the silicon wafers (4.3 mN m-1), lower than previously reported in the literature for perfluorinated monolayers, and stable for over eight weeks. Shorter chain iodo-perfluorinated (I-PFC8) or bromo-perfluorinated molecules (Br-PFC10) led to less dense layers. The monolayers are stable to heating up to 60 °C, with some loss up to 150 °C. The I-PFC12 monolayer increases the work function of silicon wafers from 3.6 V to 4.4 eV, a factor that could be gainfully used in photovoltaic applications. The I-PFC12 monolayers can be transferred into patterns onto silica substrates by micro-contact printing. The NMR data and the reproducible thickness point to an upright halogen bonding interaction between the iodine in I-PFC12 and the surface oxygen on the native silica layer.

Understanding and controlling the crystallization of organic-inorganic perovskite materials is important for their function in optoelectronic applications. This control is particularly delicate in scalable single-step thermal annealing methods. In this work, the crystallization mechanisms of flash infrared-annealed perovskite films, grown on substrates with lithographically patterned Au nucleation seeds, are investigated. The patterning enables the in situ observation to study the crystallization kinetics and the precise control of the perovskite nucleation and domain growth, while retaining the characteristic polycrystalline micromorphology with larger crystallites at the boundaries of the crystal domains, as shown by electron backscattering diffraction. Time-resolved photoluminescence measurements reveal longer charge carrier lifetimes in regions with large crystallites on the domain boundaries, relative to the domain interior. By increasing the nucleation site density, the proportion of larger crystallites is increased. This study shows that the combination of rapid thermal annealing with nucleation control is a promising approach to improve perovskite crystallinity and thereby ultimately the performance of optoelectronic devices. This work was partially supported by the Swiss National Science Foundation (SNSF) through grants numbers 153990 and 186453. A.G., E.B.-U., E.O.-M., and U.S. acknowledge the financial support by the Adolphe Merkle Foundation. The work of L.A.M. and B.E. is part of the Dutch Research Council (NWO) and was performed at the research institute, AMOLF. The work of L.A.M. was supported by NWO Vidi grant 016.Vidi.179.005. M.O. acknowledges financial support partially from the Swiss State Secretary for Education, Research, and Innovation (SERI) under contract number 17.00105 (EMPIR project HyMet). The EMPIR program is co-financed by the participating states and by the European Union’s Horizon 2020 research and innovation program. E.O.-M. acknowledges support from the Marie Skłodowska Curie fellowship, H2020 grant agreement no. 841005.

Understanding and controlling the crystallization of organic–inorganic perovskite materials is important for their function in optoelectronic applications. This control is particularly delicate in scalable single-step thermal annealing methods. In this work, the crystallization mechanisms of flash infrared-annealed perovskite films, grown on substrates with lithographically patterned Au nucleation seeds, are investigated. The patterning enables the in situ observation to study the crystallization kinetics and the precise control of the perovskite nucleation and domain growth, while retaining the characteristic polycrystalline micromorphology with larger crystallites at the boundaries of the crystal domains, as shown by electron backscattering diffraction. Time-resolved photoluminescence measurements reveal longer charge carrier lifetimes in regions with large crystallites on the domain boundaries, relative to the domain interior. By increasing the nucleation site density, the proportion of larger crystallites is increased. This study shows that the combination of rapid thermal annealing with nucleation control is a promising approach to improve perovskite crystallinity and thereby ultimately the performance of optoelectronic devices.

Polymers are essential components of many nanostructured materials. However, the refractive indices of common polymers fall in a relatively narrow range between 1.4 and 1.6. Here, it is demonstrated that loading commercially-available polymers with large concentrations of a plant-based pigment can effectively enhance their refractive index. For polystyrene (PS) loaded with 67 w/w% beta-carotene (BC), a peak value of 2.2 near the absorption edge at 531 nm is achieved, while maintaining values above 1.75 across longer wavelengths of the visible spectrum. Despite high pigment loadings, this blend maintains the thermoforming ability of PS, and BC remains molecularly dispersed. Similar results are demonstrated for the plant-derived polymer ethyl cellulose (EC). Since the refractive index enhancement is intimately connected to the introduction of strong absorption, it is best suited to applications where light travels short distances through the material, such as reflectors and nanophotonic systems. Enhanced reflectance from films is experimentally demonstrated, as large as sevenfold for EC at selected wavelengths. Theoretical calculations highlight that this simple strategy can significantly increase light scattering by nanoparticles and enhance the performance of Bragg reflectors., Small, 17 (44), ISSN:1613-6810, ISSN:1613-6829

International audience; Optical metamaterials are artificially engineered architectures that exhibit desired optical properties not found in nature. Bespoke design requires the ability to define shape, size, orientation and composition of material structures on the nanometre length scale. Bottom-up self-assembly methods, such as block copolymer (BCP) templating, offer unique pathways to tailored features, at spatial resolution not routinely achieved by conventional top-down techniques. In this review, we provide the general readership with basic concepts of the underlying fabrication processes and examine optical phenomena arising from BCP-derived metamaterials and nanoresonators, with both dielectric and plasmonic characteristics.

An increasing number of technologies require the fabrication of micro- and nanostructures over large areas. Soft lithographic methods are gaining in popularity for the manufacture of low-cost micrometre and sub-micrometre structures. Increasingly, these methods developed to structure organic resists can also be used to pattern inorganic materials. Here we introduce a simple lithographic technique that is able to pattern ceramic TiO micro- and nanostructures with high fidelity. Our method makes use of an electrohydrodynamic (EHD) film instability that is controlled by a laterally modulated electric field. A spin-coated film of a stabilized metal alkoxide precursor material was patterned using EHD lithography followed by a heat treatment at 400 °C to yield crystalline TiO micropatterns. Our technique is rather general and can be extended to a number of single- and multicomponent oxide systems.

Metal fluorides, promising lithium-ion battery cathode materials, have been classified as conversion materials due to the reconstructive phase transitions widely presumed to occur upon lithiation. We challenge this view by studying FeF3 using X-ray total scattering and electron diffraction techniques that measure structure over multiple length scales coupled with density functional theory calculations, and by revisiting prior experimental studies of FeF2 and CuF2. Metal fluoride lithiation is instead dominated by diffusion-controlled displacement mechanisms, and a clear topological relationship between the metal fluoride F− sublattices and that of LiF is established. Initial lithiation of FeF3 forms FeF2 on the particle’s surface, along with a cation-ordered and stacking-disordered phase, A-LixFeyF3, which is structurally related to α-/β-LiMn2+Fe3+F6 and which topotactically transforms to B- and then C-LixFeyF3, before forming LiF and Fe. Lithiation of FeF2 and CuF2 results in a buffer phase between FeF2/CuF2 and LiF. The resulting principles will aid future developments of a wider range of isomorphic metal fluorides. Metal-fluoride-based lithium-ion battery cathodes are typically classified as conversion materials because reconstructive phase transitions are presumed to occur upon lithiation. Metal fluoride lithiation is now shown to be dominated instead by diffusion-controlled displacement mechanisms.

We report the electrospinning of mechanically-tunable, cellulose nanocrystal (CNC)-reinforced polyurethanes (PUs). Using high-aspect ratio CNCs from tunicates, the stiffness and strength of electrospun PU/CNC mats are shown to generally increase. Furthermore, by tuning the electrospinning conditions, fibrous PU/CNC mats were created with either aligned or non-aligned fibers, as confirmed by scanning electron microscopy. PU/CNC mats having fibers aligned in the strain direction were stiffer and stronger compared to mats containing non-aligned fibers. Interestingly, fiber alignment was accompanied by an anisotropic orientation of the CNCs, as confirmed by wide-angle X-ray scattering, implying their alignment additionally benefits both stiffness and strength of fibrous PU/CNC nanocomposite mats. These findings suggest that CNC alignment could serve as an additional reinforcement mechanism in the design of stronger fibrous nanocomposite mats.

Over the past two decades, metamaterials have led to an increasing number of biosensing and nanophotonic applications due to the possibility of a careful control of light propagating through subwavelength features. Chiral nanostructures (characterized by the absence of any mirror symmetry), in particular, give rise to unique chiro-optical properties such as circular dichroism and optical activity. Here, we present a gyroid optical metamaterial with a periodicity of 65 nm exhibiting a strong circular dichroism at visible wavelengths. Our bottom-up approach, based on metallic replication of the gyroid morphology in triblock terpolymer films, generates a large area of periodic optical metamaterials. We observe a strong circular dichroism in gold and silver gyroid metamaterials at visible wavelengths. We show that the circular dichroism is inherently linked to the handedness of the gyroid nanostructure, and demonstrate its tuneability. The optical effects are discussed and compared to other existing systems, showing the potential of bottom-up approaches for large-scale circular filters and chiral sensing.

Arrays of interacting 2D nanomagnets display unprecedented electromagnetic properties via collective effects, demonstrated in artificial spin ices and magnonic crystals. Progress toward 3D magnetic metamaterials is hampered by two challenges: fabricating 3D structures near intrinsic magnetic length scales (sub-100 nm) and visualizing their magnetic configurations. Here, we fabricate and measure nanoscale magnetic gyroids, periodic chiral networks comprising nanowire-like struts forming three-connected vertices. Via block copolymer templating, we produce Ni75Fe25 single-gyroid and double-gyroid (an inversion pair of single-gyroids) nanostructures with a 42 nm unit cell and 11 nm diameter struts, comparable to the exchange length in Ni–Fe. We visualize their magnetization distributions via off-axis electron holography with nanometer spatial resolution and interpret the patterns using finite-element micromagnetic simulations. Our results suggest an intricate, frustrated remanent state which is ferromagnetic but without a unique equilibrium configuration, opening new possibilities for collective phenomena in magnetism, including 3D magnonic crystals and unconventional computing.

Organic-inorganic perovskites are one of the most promising photovoltaic materials for the design of next generation solar cells. The lead-based perovskite prepared with methylammonium and iodide was the first in demonstrating high power conversion efficiency, and it remains one of the most used materials today. However, perovskites prepared by mixing several halides and several cations systematically yield higher efficiencies than "pure" methylammonium lead iodide (MAPbI3) devices. In this work, we unravel the excited-state properties of a mixed-halide (iodide and bromide) and mixed-cation (methylammonium and formamidinium) perovskite. Combining time-resolved photoluminescence, transient absorption, and optical-pump-terahertz-probe experiments with density functional theory calculations, we show that the population of higher-lying excited states in the mixed material increases the lifetime of photogenerated charge carriers upon well above-bandgap excitation. We suggest that alloying different halides and different cations reduces the structural symmetry of the perovskite, which partly releases the selection rules to populate the higher-energy states upon light absorption. Our investigation thus shows that mixed halide perovskites should be considered as an electronically different material than MAPbI3, paving the way toward further materials optimization and improved power conversion efficiency of perovskite solar cells.

For a number of optical applications, it is advantageous to precisely tune the refractive index of a liquid. Here, we harness a well-established concept in optics for this purpose. The Kramers-Kronig relation provides a physical connection between the spectral variation of the (real) refractive index and the absorption coefficient. In particular, a sharp spectral variation of the absorption coefficient gives rise to either an enhancement or reduction of the refractive index in the spectral vicinity of this variation. By using bright commodity dyes that fulfil this absorption requirement, we demonstrate the use of the Kramers-Kronig relation to predictively obtain refractive index values in water solutions that are otherwise only attained with toxic specialised liquids., Faraday Discussions, 223, ISSN:1359-6640, ISSN:1364-5498

The effect of indentation strain ei upon hardness H and elastic modulus E of a Ni Double Gyroid (DG) nanolattice was investigated using a spherically-tipped nanoindenter. H remains invariant, while E decreases linearly, with increasing ei. Results reveal the progressive collapse of the DG lattice beneath the indenter. The measured values of H and extrapolated value of E at ei = 0 were used to estimate the yield strength and elastic modulus of the Ni cell walls. The latter was compared with the ideal strength of Ni, nanocrystalline films and of sub-100 nm diameter single crystals.