Search

Microfluidic valves based on chemically responsive materials have gained considerable attention in recent years. Herein, a wireless enantio-responsive valve triggered by bipolar electrochemistry combined with chiral recognition is reported. A conducting polymer actuator functionalized with the enantiomers of an inherently chiral oligomer was used as bipolar valve to cover a tube loaded with a dye and immersed in a solution containing chiral analytes. When an electric field is applied, the designed actuator shows a reversible cantilever-type deflection, allowing the release of the dye from the reservoir. The tube can be opened and closed by simply switching the polarity of the system. Qualitative results show the successful release of the colorant, driven by chirality and redox reactions occurring at the bipolar valve. The device works well even in the presence of chemically different chiral analytes in the same solution. These systems open up new possibilities in the field of microfluidics, including also controlled drug delivery applications.

International audience; The development of chiral catalysts plays a very important role in various areas of chemical science. Heterogeneous catalysts have the general advantage of allowing a more straightforward separation from the products. One specific case of heterogeneous catalysis is electrocatalysis, being potentially a green chemistry approach. However, a typical drawback is that the redox conversion of molecules occurs only at the electrode/electrolyte interface, and not in the bulk of the electrolyte. The second limitation is that the electrodes have to be physically connected to a power supply to induce the desired reactions. To circumvent these problems, we propose here a complementary approach by replacing macroscopic electrodes with an ensemble of self-propelled redox active microswimmers. They move autonomously in solution while transforming simultaneously a prochiral starting compound into a specific enantiomer with a very high enantiomeric excess, accompanied by a significantly increased production rate of the favorite enantiomer.

A family of inherently chiral electroactive selectors based on the 2,2’‐biindole atropisomeric scaffold, of easy synthesis and modulable functional properties, is studied in cascade in two enantioselection contexts. They are at first investigated as probes in enantioselective HPLC, studying molecular structure and temperature effects, and achieving very efficient semipreparative enantioseparation. The enantiomers thus obtained, of remarkable chiroptical features (optical rotation as well as circular dichroism), are successfully applied as selectors in chiral voltammetry in different media for discrimination of the enantiomers of chiral electroactive probes, either by conversion into enantiopure electroactive electrode surfaces by electrooligomerization on glassy carbon substrate (the two monomers with shorter alkyl chains), or as chiral additive in achiral ionic liquid (the monomer with longest alkyl chains). Discrimination is conveniently and reproducibly achieved in terms of significant potential differences for the two enantiomers, specularly inverting either probe or selector configuration. In one case successful discrimination is also observed with the two probe enantiomers concurrently present, either as racemate or with enantiomeric excesses, neatly accounted for by the peak current ratios., A series of inherently chiral electroactive selectors based on the 2,2’‐biindole atropisomeric scaffold is studied in two enantiodiscrimination contests: as probes in enantioselective HPLC and as selectors in chiral voltammetry for successful discrimination of the enantiomers of chiral electroactive probes, either by conversion into enantiopure electroactive electrode surfaces or as chiral additive in achiral ionic liquid.

International audience; Straightforward enantioselective analytical methods are very important for drug safety, considering that in certain cases one of the two enantiomers of a chiral molecule might be harmful for humans. In this work, we propose a simple system for the direct and easy read-out of the enantiomeric excess of 3,4-dihydroxyphenylalanine (DOPA) as a model analyte. A conducting oligomer, i.e. oligo-(3,3′-dibenzothiophene), bearing inherently chiral features, is electrogenerated on a polypyrrole film. The resulting freestanding hybrid material is used as a wireless enantioselective actuator in a bipolar electrochemical cell. Combining in a single setup two individual actuators with opposite chiral features allows a direct visual read-out of enantiomeric excess, as the bending amplitude of each of the two actuators is directly correlated with the concentration of the corresponding stereoisomer of the analyte. Optimization of the experimental parameters results in efficient bending, giving access to the percentage values of the enantiomeric excess in mixtures containing different ratios of the antipodes, thus opening the way to potential applications for chiral in situ analysis.

PHANE-TetraPHOS, a new D2 symmetric tetraphosphane based on the [2.2]paracyclophane scaffold, has been synthesized and characterized. The peculiarity of this system is the presence of four homotopic diphenylphosphane groups, exchangeable through C2 symmetry operations and consequently indistinguishable. Their spatial arrangement allows the simultaneous complexation of two metal atoms. Enantiomeric purity wasattained at tetra-phosphane oxide level by fractional crystallization of the diastereomeric adducts obtained from the racemate with enantiopure dibenzoyltartaric acids. Alkaline treatment ofdiastereomerically pure adducts followed by exhaustive PO groups reduction with HSiCl3 gave both PHANE-TetraPHOS antipodes in an enantiopure state. They were tested as rhodium ligands in the homogeneous enantioselective hydrogenation ofsome benchmark unsaturated compounds. Catalytic activity and enantiodiscrimination ability were found comparable tothose exhibited by the complexes of the parent bidentate ligand PHANEPHOS, but only half a mole of precious chiral ligand was employed.

A series of 2,2’-biindole-based inherently chiral electroactive monomers are comparatively investigated with their 3,3’ analogues as an excellent study case of two equivalent redox centres interacting through a torsional barrier. The twin peak potential splitting observed in voltammetry for the first oxidation of the biheteroaromatic core accounts for the energy barrier height: the lower the barrier, the larger the peak potential splitting, with modulation by solvent and temperature. The height of the energy barrier is determining for the electrochemical and spectroscopic features of the monomers as well as for their configurational stability and applicability for enantioselection purposes. The 3,3’ monomers, featuring large twin peak splittings in CV, are “trópos” systems with a low torsional barrier, so they cannot exist as stable enantiomers at room temperature. Instead their 2,2’ isomers, with much smaller twin peak splittings, are “átropos” systems and can be separated by enantioselective HPLC into stable enantiomers, providing powerful “inherently chiral” selectors with outstanding enantioselection properties in chiral electroanalysis and electrochemistry as well as in chiroptical spectroscopy, with fascinating reciprocal correlations.

International audience; Bipolar electrochemistry can be employed in the context of chiral recognition in order to obtain useful analytical readouts of enantiomeric analytes. Herein, we employ this concept for the simultaneous determination of two enantiomers present in solution, and its possible use as transduction mechanism for complex real matrices analysis. This approach is based on the combination of the enantioselective electrooxidation of only one of the two antipodes of a chiral analyte with the emission of light from light-emitting diodes (LEDs). A double hybrid device was designed, using the enantiomers of an inherently chiral oligomer and a bare gold wire as the anode and cathode of a green and red LED. By applying an appropriate voltage, the wirelessly induced redox reactions trigger light emission only when the probe with the right configuration is present in solution. This device was used to simultaneously measure the ratio between Land D-Tryptophan, both present in the same solution and to quantify L-ascorbic acid in a commercial juice sample. The measurement correlates with the value reported on the sample specifications. These results illustrate the possible use of such light emitting bipolar devices as analytical tools for qualitative and quantitative measurements of enantiomeric excess, even in real samples.

This account summarizes the development of new biheteroaromatic chiral bisphosphine oxides. 3,3′-Bithiophene-based phosphine oxides (BITIOPOs) have been successfully used as organocatalysts to promote Lewis base catalyzed, Lewis acid mediated stereoselective transformations. These highly electron-rich compounds, in combination with trichorosilyl derivatives (allyltrichlorosilane and silicon tetrachloride), generate hypervalent silicon species that act as chiral Lewis acids in highly diastereo- and enantioselective organic reactions. Several relevant examples related to these applications are discussed in detail.1 Introduction2 The BITIOPO Family3 Enantioselective Opening of Epoxides4 Enantioselective Allylation of Aldehydes5 Stereoselective Direct (Double) Aldol-Type Reaction with Ketones6 Stereoselective Direct Aldol-Type Reaction with Ester Derivatives7 Conclusions

A key approach for designing bioinspired machines is to transfer concepts from nature to man-made structures by integrating biomolecules into artificial mechanical systems. This strategy allows the conversion of molecular information into macroscopic action. Here, we describe the design and dynamic behaviour of hybrid bioelectrochemical swimmers that move spontaneously at the air–water interface. Their motion is governed by the diastereomeric interactions between immobilized enantiopure oligomers and the enantiomers of a chiral probe molecule present in solution. These dynamic bipolar systems are able to convert chiral information present at the molecular level into enantiospecific macroscopic trajectories. Depending on the enantiomer in solution, the swimmers will move clockwise or anticlockwise; the concept can also be used for the direct visualization of the degree of enantiomeric excess by analysing the curvature of the trajectories. Deciphering in such a straightforward way the enantiomeric ratio could be useful for biomedical applications, for the read-out of food quality or as a more general analogue of polarimetric measurements. Self-propelled artificial chemical swimmers have previously been developed for chemical sensing. Now, hybrid bioelectrochemical swimmers, capable of translating chiral molecular information into macroscopic motion, have been developed. Diastereomeric interactions between enantiopure oligomers immobilized on the swimmer and a chiral molecule present in solution control the trajectory of the device.

International audience; Bipolar electrochemistry has gained increasing attention in recent years as an attractive transduction concept in analytical chemistry in general, and more specifically in the frame of chiral recognition. Herein, we use this concept of wireless electrochemistry, based on the combination of the enantioselective oxidation of a chiral probe with the emission of light from a light emitting diode (LED), as an alternative for an easy and straightforward read-out of the presence of chiral molecules in solution. A hybrid polymer-microelectronic device was designed, using an inherently chiral oligomer i.e. oligo-(3,3’-dibenzothiophene) and a polypyrrole strip as the anode and cathode of a miniaturized LED. The wireless induced redox reactions trigger light emission when the probe with the right chirality is present in solution, whereas no light emission is observed for the opposite enantiomer. The average light intensity shows a linear correlation with the analyte concentration and the concept opens the possibility to quantify the enantiomeric excess in mixtures of the molecular antipodes.

International audience; Transduction of chiral information can be achieved at different length scales. Among all possible approaches, in this work, we propose a straightforward concept to transfer chiral features from the molecular level to the shape of macroscopic objects by combining the concepts of inherently chiral oligomers and bipolar electrochemistry. Hybrid freestanding lamellar films, composed of polypyrrole and the two oligomeric antipodes of a chiral monomer, are exposed in solution to a chiral target molecule (i.e.,l- and d-DOPA) in the presence of an electric field. This leads to an electrochemically induced deformation of the film, which in fine results in one or the other of two macroscopic enantiomorphs, depending on which stereoisomer is present in the solution.

A voltammetric and scanning electrochemical microscopy (SECM) investigation was performed on an inherently chiral oligomer-coated gold electrode to establish its general properties (i.e., conductivity and topography), as well as its ability to discriminate chiral electroactive probe molecules. The electroactive monomer (S)-2,2&prime, bis(2,2&prime, bithiophene-5-yl)-3,3&prime, bibenzothiophene ((S)-BT2T4) was employed as reagent to electrodeposit, by cyclic voltammetry, the inherently chiral oligomer film of (S)-BT2T4 (oligo-(S)-BT2T4) onto the Au electrode surface (resulting in oligo-(S)-BT2T4-Au). SECM measurements, performed in either feedback or competition mode, using the redox mediators [Fe(CN)6]4&minus, and [Fe(CN)6]3&minus, in aqueous solutions, and ferrocene (Fc), (S)-FcEA, (R)-FcEA and rac-FcEA (FcEA is N,N-dimethyl-1-ferrocenylethylamine) in CH3CN solutions, indicated that the oligomer film, as produced, was uncharged. The use of [Fe(CN)6]3&minus, allowed establishing that the oligomer film behaved as a porous insulating membrane, presenting a rather rough surface. This was inferred from both the approach curves and linear and bidimensional SECM scans, which displayed negative feedback effects. The oligomer film acquired semiconducting or fully conducting properties when the Au electrode was biased at potential more positive than 0.6 V vs. Ag|AgCl|KCl. Under the latter conditions, the approach curves displayed positive feedback effects. SECM measurements, performed in competition mode, allowed verifying the discriminating ability of the oligo-(S)-BT2T4 film towards the (S)-FcEA and (R)-FcEA redox mediators, which confirmed the results obtained by cyclic voltammetry. SECM linear scans indicated that the enantiomeric discriminating ability of the oligo-(S)-BT2T4 was even across its entire surface.

2,2'-Bis[2-(5,2'-bithienyl)]-3,3'-bithianaphthene (1) is the progenitor of a class of C2 symmetric thiophene-based electroactive monomers that, when electrooxidized in the enantiomerically pure form, produce inherently chiral films endowed with outstanding electrochemical enantiorecognition properties. The enantioselective high-performance liquid chromatography (HPLC) is the only approach used so far to resolve the racemic form of 1 into enantiomers. In this work, an improved HPLC method for multimilligram enantiomer production is presented. Key factors controlling the enantioseparation, such as mobile phase composition and column temperature, were identified using a 100 × 4.6 mm i.d. Chiralpak IB-3 column and subsequently scaled up to a 250 × 10.0 mm i.d. Chiralpak IB column. In the optimized semipreparative conditions, about 34 mg of pure (P) and (M) enantiomers per hour could be produced.

Redox potential modulation of achiral probes on chirally modified electrode surfaces with spin filter features under an applied magnetic field., Impressive spin-related effects are observed in cyclic voltammetry (CV) experiments performed under an applied magnetic field on a non-ferromagnetic electrode modified with a thin electroactive oligothiophene film, either “inherently chiral” or featuring chiral pendants with stereogenic centres. When flipping the magnet’s north/south orientation, the CV peaks of two achiral, chemically reversible Fe(iii)/Fe(ii) redox couples in aqueous or organic solution undergo impressive potential shifts (up to nearly 0.5 V depending on protocol conditions), specularly by changing the film’s (R)- or (S)-configuration. The magnitude of the potential shift decreases upon increasing both the polymer film thickness and the distance between the permanent magnet and the electrode surface. Such unprecedented spin-related redox potential modulation, obtained in the absence of a magnetic electrode acting as a spin injector, provides striking evidence (as well as an attractive evaluation criterion) of the spin selectivity properties of chiral thin films.

Chiral electroanalysis could be regarded as the highest recognition degree in electrochemical sensing, implying the ability to discriminate between specular images of an electroactive molecule, particularly in terms of significant peak potential difference. A groundbreaking strategy was recently proposed, based on the use of "inherently chiral" molecular selectors, with chirality and key functional properties originating from the same structural element. Large differences in peak potentials have been observed for the enantiomers of different chiral molecules, also of applicative interest, using different selectors, all of them based on atropisomeric biheteroaromatic scaffolds of axial stereogenicity. However, helicene systems also provide inherently chiral building blocks with attractive features. In this paper the enantiodiscrimination performances of enantiopure inherently chiral films obtained by electrooxidation of a thiahelicene monomer with helicoidal stereogenicity are presented for the first time. The outstanding potentialities of this novel approach are evaluated towards chiral probes with different chemical nature and bulkiness, in comparison with a representative case of the so far exploited class of inherently chiral selectors with axial stereogenicity. It is also verified that the high enantiodiscrimination ability holds as well for electron spins, as for atropisomeric selectors.

Enantioselective electroanalysis, which aims to discriminate the enantiomers of electroactive chiral probes in terms of potential difference, is a very attractive goal. To achieve this, its implementation is being studied for various "inherently chiral" selectors, either at the electrode surface or in the medium, yielding outstanding performance. In this context, the new inherently chiral monomer Naph2T4 is introduced, based on a biaromatic atropisomeric core, which is advantageously obtainable in enantiopure form without HPLC separation steps by a synthetic route hinging on enantiopure 2,2&rsquo, dibromo-1,1&rsquo, binaphthalenes. The antipodes of the new inherently chiral monomer can be easily electrooligomerized, yielding inherently chiral electrode surfaces that perform well in both cyclic voltammetry (CV) enantiodiscrimination tests with pharmaceutically interesting molecules and in magnetoelectrochemistry experiments.

In the present paper, the synthesis and characterization of 2,2′-bis{bi[2,2’-(3,4-ethylenedioxy)thiophen-5-yl]}-3,3′-bithianaphthene, nicknamed BT2E4, is reported. We show that electrooligomerization of BT2E4 leads to electroactive films which are evaluated by cyclic voltammetry (CV), UV/vis spectroelectrochemistry and CV coupled with in-situ conductance measurements. Direct comparisons to the properties of the oligomers obtained from the atropisomeric all-thiophene analogue BT2T4 show that the introduction of EDOT leads to a strong reduction of the band-gap, an overall red-shifted absorption spectrum and a rigidification of the structure. Finally, DFT and TD-DFT calculations were performed in parallel to investigate and to compare the electronic and molecular structures of neutral and charged monomer and oligomer species.

Two new inherently chiral oligothiophenes characterized by the atropisomeric 3,3'-bithianaphtene scaffold functionalized with fused ring bithiophene derivatives, namely 4H-cyclopenta[2,1-b3:4b']dithiophene (CPDT) and dithieno[3,3-b:2',3'-d]pyrrole (DTP), were synthesized. The racemates were fully characterized and resolved into antipodes by enantioselective HPLC. The enantiomers were analyzed through different chiroptical techniques: electronic circular dichroism (ECD) and vibrational circular dichroism (VCD) were employed to attribute the absolute configuration (AC). Comparison of experimental and calculated VCD spectra confirmed the DFT calculated conformational characteristics. The compound functionalized with two CPDT units was oxidized with FeCl3 , and ECD and CPL of the resulting material were measured. Circularly polarized luminescence (CPL) was measured to verify if inherently chiral oligothiophenes could be promising systems for chiral photonics applications.

2,2',5,5'-Tetraphenyl-3,3'-bithiophene-4,4'-diol, the first member of a new class of chiral C2-symmetric atropoisomeric diols based on a biheteroaromatic scaffold, was synthesized. Dynamic enantioselective HPLC experiments provided a racemization barrier of 22.9 kcal/mol at 25 °C which was high enough to permit the chromatographic collection of both the enantiomers at semipreparative scale, but at the borders for application as promoter in asymmetric catalysis. The ground and transition states involved in the enantiomerization process have been identified through DFT calculations, which suggested the intermediacy of a tautomeric species, where a thiophene-3-ol unit and a 2,3-dihydro-thiophene-3-one ring are present. The racemization mechanism was supported by dynamic HPLC experiments. Calculations suggested also which possible substituent groups in position 2,2' of the thiophene rings might lead to an increase in the enantiomerization barriers sufficient to confer full configurational stability to the 3,3'-bithiophene framework.

FeCl3 oxidation of the racemate of C2 symmetric, inherently chiral, sexithiophene monomer 1 (2,2′-bis(2,2′-bithiophene-5-yl)-3,3′-bithianaphthene) affords a mixture of cyclic oligomers, from the prevailing dimer to traces of the pentamer. The oligomers are constituted by mixtures of stereoisomers which are two for dimer 2, four for trimer 3 and six for tetramer 4. Cyclooligomers 2 and 3 could be separated by chromatography, while 4 was synthesized by ring closure of open chain dimer 2a, prepared in turn by controlled coupling of the anion of racemic 1. The optical properties of open-chain stereoisomer 2a and tetramer 4 have been compared with those of 2 and 3 respectively. The macrocyclic oligomers have been tested as donor materials in bulk heterojunction solar cell prototypes both as a crude mixture resulting from oxidation of 1 and as a single oligomer. Theoretical calculations support the photophysical properties of these new materials.

Two diastereoisomeric pairs of bis-oxazolines, provided with a stereogenic center at carbon 4 and based on the 3,3′-bithiophene atropisomeric scaffold, were synthesized and structurally characterized. They differ in the substituents at positions 2 and 5 of the thiophene rings, which are functionalized with methyl (1) or phenyl (2) groups, respectively. In vibrational circular dichroism (VCD) spectra, recorded in CCl4 solutions, it is possible to distinctly recognize the characteristic features of axial and central stereogenic elements. In tandem with Density Functional Theory (DFT) calculations, the absolute configuration (AC) of the diastereoisomers was safely established. In this case, VCD was shown to be superior to ECD (electronic circular dichroism) in the assignment of AC. The normal modes, evaluated from DFT calculations, show that the VCD signals in correspondence with the stereogenic axis of the bithiophene unit are different for 1 and 2. The VCD spectra of a molecular analog of 1, the (S)-2,2′,5,5′-tetramethyl-4,4′-bis-(diphenylphosphino)-3,3′-bithiophene oxide (3), characterized by the same 3,3′-bithiophene scaffold, but devoid of stereogenic centers, exhibits signals similar to those observed in the case of diastereoisomer (aS,R,R)-1a, associated with almost identical normal modes. Chirality 28:686–695, 2016. © 2016 Wiley Periodicals, Inc.

International audience; Two complementary Pd-catalyzed protocols enabling the γ-selective intermolecular allylic amination of but-3-enoic acid derivatives are reported. These transformations could be successfully achieved via, either a direct Pd(II)-catalyzed protocol or an one-pot Pd(II)/Pd(0)-catalyzed sequence, depending on the nature of the nitrogen nucleophile used.

The racemate of an inherently chiral "spider-like" octathiophene monomer T83 , in which chirality is generated by torsion in its backbone, was synthesized. The racemate was resolved into configurationally stable antipodes by HPLC on a chiral stationary phase. Electrooxidation of the enantiomers resulted in materials displaying high enantiorecognition ability towards the antipodes of some chiral probes. Moreover, the T83 racemate demonstrated great aptitude to stimulate formation of 3D rigid architectures if used as a cross-linking monomer for molecular imprinting. This feature was exploited to devise a molecularly imprinted polymer-based chemosensor selective for a thymine-adenine oligonucleotide.

The new inherently chiral material shows outstanding chirality manifestations with chiral probes, as well as with circularly polarized light components and electron spins., Chiral oligothiophene monomers with C2 symmetry, based on 3,3′-bithiophene atropisomeric cores with high racemization barriers, have recently been shown to provide excellent chiral starting materials with high electroactivity for the easy preparation of enantiopure electroactive films endowed with powerful chirality manifestations. We now introduce an inherently chiral monomer based on a 2,2′-biindole core, as the prototype of a new inherently chiral monomer family, whose properties could be modulable through functionalization of the pyrrolic N atoms. By fast, regular electrooligomerization the new monomer yields inherently chiral films with high, reversible electroactivity and, above all, impressive enantioselectivity towards very different chiral probes, some of pharmaceutical interest, as general-scope electrode surfaces. Such results, while opening the way to a new, attractive inherently chiral selector class, nicely confirm the general validity of the inherent chirality strategy for chiral electrochemistry. Furthermore, the enantioselectivity of the new selectors not only holds with electroactive chiral probes, but also with circularly polarized light components as well as electron spins, resulting in good chiroptical and spin filter performances, which suggests fascinating correlations between the three contexts.

A molecularly imprinted polymer (MIP) was designed and synthesized to serve as a functional material for selective recognition of 6-thioguanine (6TG), an antitumor drug. For that, the newly synthesized functional monomer, cytosine-bis(2,2′-bithienyl)-(4-carboxyphenyl)methane ester (Cyt-S4), revealed Watson–Crick type nucleobase pairing of 6TG. Formation of the Cyt-S4 and 6TG complex of the 2:1 stoichiometry was postulated based on the DFT calculations at the B3LYP/3-21G(⁎) level and experimentally confirmed by fluorescence titration. The molecularly imprinted polymer (MIP) film was deposited by potentiodynamic electropolymerization on a Pt disk electrode as well as on an Au-coated glass slide and on an Au-quartz crystal resonator. The statistical model of formation of this film was successfully simulated by molecular dynamics. Completeness of the subsequent 6TG template extraction from MIP was confirmed by the UV–visible spectroscopy. An imprinting factor of 2.9 for the MIP film was determined by piezoelectric microgravimetry using ECQM. The double-layer capacity and alternating current measurements under flow-injection analysis (FIA) conditions were selected to transduce the 6TG recognition signal into the change of the double-layer capacity dependence on the 6TG concentration in solution for different supporting electrolyte concentrations. Detectability of the resulting chemosensor was 10 µM 6TG for the 0.5 M KF carrier solution in FIA. Selectivity of the chemosensor with respect to common interferences was high, e.g., it exceeded 130 to 2-amino-6-methylmercaptopurine, a 6TG metabolite.

The novel [Re2(μ-H)(μ-OOC-CPDT)(CO)6(μ-3-Me-pydz)] complex (1; OOC-CPDT = 4H-cyclopenta[2,1-b:3,4-b']dithiophene-4-carboxylate, 3-Me-pydz = 3-methylpyridazine) has been prepared and characterized by single-crystal X-ray diffraction, density functional theory (DFT), and time-dependent DFT computations, UV-vis absorption and emission spectroscopy, and cyclic voltammetry (CV). The measured properties indicate the lack of electronic communication in the ground state between the CPDT and the rhenium diazine moieties. Oxidative electropolymerization of 1, achieved by repeated potential cycling (-0.4 to +1.0 V vs Fc(+)/Fc, in acetonitrile) with different supporting electrolytes, on different electrodes, afforded an electroactive and stable metallopolymer (poly-1). In situ measurements of the mass of the growing film (on a gold electrode, with an electrochemical quartz microbalance) confirmed the regularity of the polymerization process. The polymer exhibits two reversible oxidation peaks of the thiophene chain and a broad irreversible reduction peak (-1.4 V, quite close to that observed for the reduction of monomer 1), associated with a remarkably delayed sharp return peak, of comparable associated charge, appearing in close proximity (+0.3 V) to the first oxidation peak of the neutral polythiophene chain. This charge-trapping effect can be observed upon repeated cycles of p and n doping, and the negative charge is maintained even if the charged electrode is removed from the solution for many hours. Electrochemical impedance spectroscopy showed that the main CV oxidation peak corresponds to facile charge transfer, combined with very fast diffusion of both electrons and ions within the polymer. In summary, poly-1 provides a new example of a metallopolymer, in which the conductive properties of the π-conjugated system are added to the redox behavior of the pendant-isolated complexes.

Circular dichroism (CD) and ultraviolet absorption (UV) spectra of films obtained by electrochemical polymerization of inherently chiral 2,2′-bis(2,2′-bithiophene-5-yl)-3,3′-bithianaphthene (T4-BT2...

The typical design of chiral electroactive materials involves attaching chiral pendants to an electroactive polyconjugated backbone and generally results in modest chirality manifestations. Discussed herein are electroactive chiral poly-heterocycles, where chirality is not external to the electroactive backbone but inherent to it, and results from a torsion generated by the periodic presence of atropisomeric, conjugatively active biheteroaromatic scaffolds, (3,3′-bithianaphthene). As the stereogenic element coincides with the electroactive one, films of impressive chiroptical activity and outstanding enantiodiscrimination properties are obtained. Moreover, chirality manifestations can be finely and reversibly tuned by the electric potential, as progressive injection of holes forces the two thianaphthene rings to co-planarize to favor delocalization. Such deformations, revealed by CD spectroelectrochemistry, are elastic and reversible, thus suggesting a breathing system.

Unknown 1H-2,7-dihydro-1-phenylphosphepine, containing a 2,2′,5,5′-tetramethyl-3,3′-bithiophene atropisomeric scaffold (Ph-tetraMe-Bithienine), and its oxide have been synthesized and structurally characterized by single-crystal X-ray diffraction analysis. The most evident structural feature is the very small dihedral angle. The electronic properties of the phosphane were quantitatively evaluated by cyclic voltammetry and compared with three other 2,7-dihydro-1-phenylphosphepines differing in the nature of the biaromatic scaffold (biphenyl, 1,1′-binaphthyl and 2,2′-dimethoxybiphenyl). The racemate of the phosphane oxide was resolved into antipodes, which were reduced to the enantiopure phosphanes and employed as ligands in Rh and Pt complexes in homogeneous stereoselective catalytic reactions. The enantioselective ability and catalytic activity of the new mediators were found to be quite modest in the hydrogenation reactions of olefinic double bonds, whereas good performances were achieved in specific C–C bond-forming reactions. The results are interpreted on the basis of the steric and electronic properties of the ligand.

Two diastereoisomeric pairs of bis-oxazolines, provided with a stereogenic center at carbon 4 and based on the 3,3'-bithiophene atropisomeric scaffold, were synthesized and structurally characterized. They differ in the substituents at positions 2 and 5 of the thiophene rings, which are functionalized with methyl (1) or phenyl (2) groups, respectively. In vibrational circular dichroism (VCD) spectra, recorded in CCl4 solutions, it is possible to distinctly recognize the characteristic features of axial and central stereogenic elements. In tandem with Density Functional Theory (DFT) calculations, the absolute configuration (AC) of the diastereoisomers was safely established. In this case, VCD was shown to be superior to ECD (electronic circular dichroism) in the assignment of AC. The normal modes, evaluated from DFT calculations, show that the VCD signals in correspondence with the stereogenic axis of the bithiophene unit are different for 1 and 2. The VCD spectra of a molecular analog of 1, the (S)-2,2',5,5'-tetramethyl-4,4'-bis-(diphenylphosphino)-3,3'-bithiophene oxide (3), characterized by the same 3,3'-bithiophene scaffold, but devoid of stereogenic centers, exhibits signals similar to those observed in the case of diastereoisomer (aS,R,R)-1a, associated with almost identical normal modes. Chirality 28:686-695, 2016. © 2016 Wiley Periodicals, Inc.

"Inherently chiral" thiophene-based electroactive oligomer films have recently been shown to exhibit outstanding chirality manifestations. One of the most exciting among them is an unprecedented enantioselection ability as electrode surfaces. In fact, in preliminary chiral voltammetry experiments, the new electrodes have been shown to both discriminate the enantiomers of chiral probes (either enantiopure or in a mixture, in terms of large differences in peak potentials) and quantify them (in terms of linear dynamic ranges in peak currents), without the need for preliminary separation steps. Such ability has now been tested on a series of chiral DOPA-related molecules, from phenolic amino acid tyrosine (together with its methyl ester) to catecholic amino acid DOPA (together with its methyl ester), to catecholamine epinephrine (adrenaline). The wide-range enantioselectivity of the new inherently chiral electrode surfaces is fully confirmed, as large peak potential differences are obtained for probe enantiomers of the whole series working in common aqueous buffers. Moreover, interesting modulating effects on enantiodiscrimination can be observed as a function of both molecular structure and pH. Graphical abstract Inherently chiral thiophene-based electrodes at work with pharmaceutically relevant probes.

Tetrathia[7]helicene-based phosphanes thiaheliphos (2a), nPr-thiaheliphos (2b) and di-nPr-thiaheliphos (2c) have been prepared from the 2,13-dilithio derivatives of thiahelicenes 1a-c by reaction with an excess of Ph2PCl. Protection of the air-sensitive products as BH3 adducts, from which the phosphanes 2a-c are easily regenerated on heating with ethanol, is described. New rhodium(I) complexes 8 and 9 were obtained by reaction of 2c with [Rh(COD)(2)](+)[BF4] and [BARF], respectively, which were converted by oxidation into the chelating phosphane-phosphane oxide Rh-I complexes 10 and 11. The monophosphane 5 was similarly prepared, and reaction of the dilithio species with ClP(O)(OEt)(2) gave the diphosphonate 17, which was characterized by X-ray crystallography. Comparison of data from DFT calculations (B3LYP/SVP) on 2c, 8 and 10 and X-ray data for 17 reveals a strong tension within the thiaheliphos ligands that is partially relaxed by increasing the Rh-P distances and the bite angle of the chelating ligand. Compound (P)-(+)-1c, obtained by chromatographic resolution, was transformed into optically pure (P)-(+)-2c, which was used in the asymmetric hydrogenation of itaconic acid ester and methyl 2-acetamidoacrylate (product ees up to 40%).

A highly stereoselective direct aldol condensation of ketones to aromatic aldehydes was realized; the trichlorosilyl enolether generated in situ in the presence of tetrachlorosilane is activated by catalytic amounts of an enantiomerically pure biheteroaromatic phosphine oxide to react with aldehydes, coordinated as well as activated by the chiral cationic hypervalent silicon species. This Lewis acid-mediated Lewis base-catalyzed transformation allowed, starting from two carbonyl compounds, to directly synthesize β-hydroxy ketones generally with high anti stereoselectivity and up to 93% ee for the anti isomer.

Enantiomerically pure biheteroaromatic diphosphine oxides were synthesised and tested as organocatalysts in two different reactions involving trichlorosilyl compounds. The allylation of aldehydes with allyl(trichloro)silane afforded homoallylic alcohols in fair to good yields and up to 95% ee. Preliminary experiments showed that this new class of metal-free catalysts was able also to promote the stilbene oxide opening by addition of tetrachlorosilane with enantioselectivity higher than 80%. The interesting results in terms of chemical and stereochemical efficiency open the way to further studies towards the development of new chiral heteroaromatic Lewis bases as efficient metal-free catalysts.

With an established procedure of molecular imprinting, a synthetic polymer receptor for the neopterin cancer biomarker was devised and used as a recognition unit of a potentiometric chemosensor. For that, bis-bithiophene derivatized with cytosine and bithiophene derivatized with boronic acid were used as functional monomers. The open-circuit potential (OCP) based transduction under flow-injection analysis conditions (FIA) determined neopterin in the concentration range of 0.15-2.5mM with the 22 µM limit of detection (LOD) and 7.01(±0.15) mVmM(-1) sensitivity indicating its potential suitability in clinical analysis applications. The molecularly imprinted polymer (MIP) film showed an appreciable apparent imprinting factor of ~6. The chemosensor successfully discriminated the interferences including the 6-biopterin and pterin structural analogs of neopterin as well as glucose and creatinine. Moreover, it determined neopterin in synthetic serum samples.