Search

OBJECTIVES To summarize the existing evidence on patient-reported outcome measures (PROMs) of implant-supported restorations fabricated using a digital workflow in comparison to conventional manufacturing procedures. METHODS A PICO strategy was executed using an electronic and manual search focusing on clinical studies evaluating PROMs of implant-supported restorations. Only clinical trials assessing conventional versus digital workflows for implant-supported restorations were included. PROMS on implant impression procedures and fabrication of final restorations were evaluated using random and fixed effects meta-analyses, while implant planning/placement was reported descriptively. RESULTS Among 1062 titles identified, 14 studies were finally included, and only seven studies were eligible for meta-analysis. For implant planning and placement, only a qualitative analysis was possible due to heterogeneity between the studies. For impression procedures, the random effects model revealed statistically significant differences in taste, anxiety, nausea, pain, shortness of breath, and discomfort in favor of optical impressions. No significant difference in the subjective perception of the duration of an impression could be reported. For the final fabrication of restorations, no significant difference between veneered and monolithic posterior restorations was found in terms of esthetic, function, and general satisfaction. CONCLUSION Most of the studies reporting about PROMs were published during the last ten years and limited to implant-supported single crowns in the posterior region. Based on PROMs, no scientifically proven recommendation for guided implant placement could be given at this time. Patients showed high preference for optical impressions, whereas no differences between veneered and monolithic restorations could be reported.

In der Zahn‑, Mund- und Kieferheilkunde sind Implantate langst unentbehrlich geworden. Die dentale Implantologie hat dazu beigetragen, dass die vollstandige „Zahnlosigkeit“ seltener bzw. spater auftritt. Zugleich hat sie die therapeutischen Moglichkeiten deutlich erweitert und vielfach auch vereinfacht. Dentale Implantate liefern haufig gunstige funktionelle Ergebnisse fur eine wachsende Zahl von Patienten. Daruber hinaus verbessern sie oft Asthetik und Phonetik und starken so das Selbstvertrauen der Betroffenen. Wie jede therapeutische Option haben sie jedoch ihre Grenzen und bergen Fallstricke – Aspekte, die im vorliegenden Beitrag einer ethischen Analyse unterzogen werden. Deren Ergebnisse machen deutlich, dass vulnerablen (z. B. schwerkranken, betagten oder eingeschrankten) Patienten besondere Aufmerksamkeit geschenkt werden sollte. Auch sie profitieren potenziell von einer Implantatbehandlung, wobei hier jedoch Planungs- und Nachsorgeaspekte von spezifischer Bedeutung sind.

Clinical oral implants research: official publication of the European Association for Osseointegration 33(1), 53-64 (2022). doi:10.1111/clr.13864, Published by Wiley-Blackwell, Oxford

OBJECTIVES To compare the removal of simulated biofilm at two different implant-supported restoration designs with various interproximal oral hygiene aids. METHODS Mandibular models with a missing first molar were fabricated and provided with single implant analogues (centrally or distally placed) and two different crown designs (conventional [CCD] and alternative crown design [ACD]). Occlusion spray was applied to the crowns to simulate artificial biofilm. Thirty participants (dentists, dental hygienists, and laypersons) were equally divided and asked to clean the interproximal areas with five different cleaning devices to further evaluate if there were differences in their cleaning ability. The outcome was measured via standardized photos and the cleaning ratio, representing the cleaned surfaces in relation to the respective crown surface. Statistical analysis was performed by linear mixed-effects model with fixed effects for cleaning tools, surfaces, crown design and type of participant, and random effects for crowns. RESULTS The mean cleaning ratio for the investigated tools and crown designs were (in%): Super floss: 76 ± 13/ACD and 57 ± 14/CCD (highest cleaning efficiency), followed by dental floss: 66 ± 13/ACD and 56 ± 15/CCD, interdental brush: 55 ± 10/ACD and 45 ± 9/CCD, electric interspace brush: 31 ± 10/ACD and 30 ± 1/CCD, microdroplet floss: 8 ± 9/ACD and 9 ± 8/CCD. There was evidence of an overall effect of each factor "cleaning tool," "surface," "crown design," and "participant" (p

Advanced healthcare materials 10(10), 2100132 (2021). doi:10.1002/adhm.202100132, Published by Wiley-VCH, Weinheim

pAugmentation of alveolar ridge defects is a technique-sensitive procedure in dental implantology. Depending on the size of the defect, it may be necessary to use autogenous bone blocks. However, patients may be against these blocks as these procedures are surgically invasive.br /Case report: This report describes the restoration of a partially edentulous mandible, which suffered a major bone defect from the right canine to the third molar site after multiple implant losses. The use of a CAD/CAM allogeneic cancellous bone block from a living donor bone was planned for the reconstruction of the alveolar ridge at the defected site. A CBCT scan was taken and the virtual planning of the bone augmentation and placement of four implants was performed. The milled bone block was fixed for augmentation and the implants were placed using a CBCT-generated surgical guide. After osseointegration, a CAD/CAM-fabricated screw-retained metal-ceramic implant fixed partial denture with angulated screw channels was delivered.br /Results: The use of CAD/CAM-milled, allogeneic bone block resulted in a time-efficient and simplified reconstruction of the defect because no donor site was used, and the fit of the block on the native bone was uneventful and fast. At the 1-year follow-up, an average peri-implant vertical soft tissue decrease of 1nbsp;mm on buccal and 0.3nbsp;mm on lingual sites was observed and the peri-implant tissues were healthy.br /Conclusions: The long-term success of this CAD/CAM cancellous bone block needs to be evaluated in well-designed clinical studies./p.

Objective To compare the radiographic marginal bone loss and clinical parameters of splinted and non-splinted fixed dental prostheses on short implants in the posterior region of the lower jaw 3 years after loading. Material and methods Twenty patients, 15 female and five males, with uni- or bilateral free-end situations in the mandible participated in the study. Two short implants (7 mm) in the posterior mandible were placed and patients were randomized to receive splinted (n = 11) or non-splinted (n = 13) cemented crowns. Marginal bone loss (MBL) was assessed on radiographs taken with customized positioning jigs at baseline, 1 and 3 years after loading. Plaque index (PI), gingival index (GI), probing depth (PD), and bleeding on probing (BOP) were measured. (ClinicalTrials.gov; identifier: NCT03558347). Results After 3-year survival rate of altogether 48 implants was 100% for both groups. Success rate (according to Papaspyridakos, Chen, Singh, Weber, & Gallucci, 2012) was 84.6% for non-splinted and 86.4% for splinted implants. At restoration level survival rate was 100% for both groups. Marginal bone level changes showed mean gain of 0.3 ± 0.8 mm for non-splinted and 0.1 ± 0.5 mm for splinted implants 3 years after loading. Statistical analysis showed no significant difference in PI, GI, PD, BOP, and marginal bone loss between both groups (p > .05). Conclusion Within the limitations of this study it can be concluded that splinting crowns on short implants neither seems to affect the amount of marginal bone loss nor peri-implant health 3 years after loading.

To examine the effect of ultraviolet light (UV) treatment on the surface characteristics of two acid-etched zirconia-based dental implant materials.Discs of two zirconia-based materials (Zr1 and Zr2) with smooth (m) and roughened (r) surfaces were treated by UV light for 15min. The surface topography was investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The surface elemental composition of all samples was determined by X-ray photoelectron spectroscopy (XPS), the crystalline property by X-ray diffraction (XRD) and the hydrophilic status by contact angle (CA) measurements of a water droplet.SEM and AFM revealed quantitative and qualitative differences between the roughened and smooth surfaces. UV treatment did not induce any topographic changes of the tested surfaces (p0.05). All UV-treated samples showed a significant surface elemental content change with a decrease of carbon by 43-81%, an increase of oxygen by 19-45%, and an increase of zirconia by 9-41%. Upon UV treatment, a 19-25% increase of the crystalline monoclinic phase was observed on surfaces of material Zr1, whereas a slight increase on the smooth Zr2 surface (+3%) and a decrease on the roughened Zr2 surface by 20% was observed. For all samples, the hydrophilic status changed significantly from hydrophobic to hydrophilic by UV treatment (p0.0001). The average contact angles were between 56.4° and 69° before and 2.5° and 14.1° after UV-light treatment.UV treatment altered the physicochemical properties of the two zirconia implant surfaces investigated. The mechanism by which such changes are induced requires further investigation.

The aims of this systematic review were to investigate the success rates of prosthetic restorations on endodontically treated teeth and their manner of failure. PubMed and hand literature searches were conducted on studies published until June 2012. Only clinical studies on human subjects referring to the success rates of prosthetic restorations on endodontically treated teeth with a follow-up period of at least 6 years were reviewed. A total of four studies were identified. Meta-analysis showed the success rate to be 92% (CI 82-98%) for single crowns on endodontically treated teeth and 79% (72-86%) for fixed dental prostheses. Only one study reported on removable dental prostheses with a success rate of 66%. Single crowns on teeth restored without posts demonstrated a success rate of 94% (CI 84-99%), whereas where posts were placed, the success rate was lower (92% CI 82-98%). Single crowns over cast post-and-cores and prefabricated posts showed success rates of 93% (CI 82-99%) and 94% (CI 90-97%), respectively; both differences were not statistically significant (significance level of 5%). The most common reason for failure was post-debonding. Single crowns seem to be the best treatment modality for endodontically treated teeth. However, due to the low number of studies included and their design, the results of this systematic review should be interpreted with caution. Further clinical studies are needed to provide high-quality evidence on the topic.

Objectives: To investigate the influence of different temperatures on the compressive strength of glass ionomer cement (GIC) modified by the addition of silica-coated wax capsules, Material and Methods: Commercially-available GIC was modified by adding 10% silica-coated wax capsules. Test blocks were fabricated from pure cement (control) and modified cement (test), and stored in distilled water (37 °C/23 h). The compressive strength was determined using a universal testing machine under different temperatures (37 °C, 50 °C, and 60 °C). The maximum load to failure was recorded for each group. Fractured surfaces of selected test blocks were observed by scanning electron microscopy (SEM), Results: For the control group, the average compressive strength was 96.8 ± 11.8, 94.3 ± 5.7 and 72.5 ± 5.7 MPa for the temperatures 37 °C, 50 °C and 60 °C respectively. The test group reported compressive strength of 64.8 ± 5.4, 47.1 ± 5.4 and 33.4 ± 3.6 MPa at 37 °C, 50 °C and 60 °C, respectively. This represented a decrease of 28% in compressive strength with the increase in temperature from 37 °C to 50 °C and 45% from the 37 °C to the 60 °C group, Conclusion: GIC modified with 10% silica-coated wax capsules and temperature application show a distinct effect on the compressive strength of GIC. Considerable compressive strength reduction was detected if the temperature was above the melting temperature of the wax core.

Immediate loading of oral implants has become popular because of the increasing demands of a shortened treatment time. This literature review evaluates the prognosis of immediately loaded implants and their restorations with immediate or delayed implant placement. Special attention was given to the impact of type of jaw, bone quality, implant length, time of implant placement and type of restoration. An electronic (PubMed) and a manual search in relevant journals were conducted until February 2012. Only publications in English, in peer-reviewed journals, were considered. Nine studies met the inclusion criteria: five studies dealt with fixed restorations, two studies with removable rehabilitation of edentulous jaws and two studies dealt with partially edentulous patients. Implant survival rates ranged from 95·8% to 100%, implant success rates in the treatment for the mandible from 79% to 100% and restoration survival rates for both jaws from 96·4% to 100%. Within the limits of this review, appropriate patient selection, primary implant stability, splinting of implants and the expertise of surgeons seem to be important for the prognosis of immediately loaded implants and their restorations. Good bone quality and use of long implants appear to play a role. However, careful interpretation is required because conclusions are based on articles with low level of evidence. While immediate loading of oral implants in the mandible shows encouraging and predictable results, further multicenter randomised controlled clinical trials with sufficient statistical power are needed to examine (i) the outcome of immediately loaded implants in the maxilla and (ii) the outcome of immediate loading of immediately placed implants.

Summary Aim of this review was to investigate the prognosis of implants inserted in augmented sinuses and fixed restorations supported by these implants. Special attention was given to the impact of grafting material, time of implant placement, residual bone height and type of fixed restoration. An electronic search in PubMed, the German database medpilot and the Cochrane Library was executed followed by supplementary manual search in relevant journals. The search was limited to human studies published up to November 2010. Only publications in English and German, in peer-reviewed journals, were considered. After the initial search and application of selection criteria on titles and abstracts, a full-text analysis of 67 articles was performed, out of which six prospective and three retrospective studies were finally included in the review. The heterogeneous properties of the identified articles did not allow systematic analysis of the data. Success rates of implants were between 96·3% and 100%, survival rates were between 75% and 100%, and survival rates of single crowns, splinted crowns and fixed partial dentures ranged between 96·4% and 100% after a follow-up of 12–101 months. Within the limits of this review, the prognosis of implants and fixed restorations seemed not to be influenced by the type of restorations, graft material, residual bone height and time of implant placement. However, conclusions of this review are based on studies with low level of evidence; therefore, careful interpretation is required. Multicentre randomised controlled clinical trials with sufficient statistical power concentrating on few factors are needed to reach sound conclusions.

Objective: Improvements in the bioactivity of zirconia implants for accelerated healing and reduced morbidity have been of continuing interest in the fields of dentistry and orthopedic surgery. The aim of the present study was to examine whether UV treatment increases the osteoconductivity of zirconia-based materials. Materials and Methods: Smooth and rough zirconia-based disks and cylindrical implants were treated with UV light for 15 min and subsequently placed in rat femurs. Surface characterization was performed using scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and contact angle measurements. Results: In vivo histomorphometry revealed that the percentage of bone-implant contact and the amount of bone volume, formed around UV-treated implants, increased by 3–7-fold for smooth surfaces and by 1.4–1.7-fold for rough surfaces compared to non-treated specimens at Weeks 2 and 4 of healing, respectively. A biomechanical test showed that UV treatment accelerated the establishment of bone-zirconia integration and enhanced the strength of the bone-implant interface by two-fold. Additionally, surface characterization of the zirconia disks revealed that UV treatment decreased the amount of surface carbon and converted the hydrophilic status from hydrophobic to superhydrophilic. Conclusions: This study indicates that UV light pretreatment enhances the osteoconductive capacity of zirconia-based materials.

Over the last decade tissue engineering has emerged as a key factor in bone regeneration within the field of cranio-maxillofacial surgery. Despite this in vivo analysis of tissue-engineered-constructs to monitor bone rehabilitation are difficult to conduct. Novel high-resolving flat-panel based volume CTs (fp-VCT) are increasingly used for imaging bone structures. This study compares the potential value of novel fp-VCT with conventional multidetector CT (MDCT) based on a sheep sinus floor elevation model. Calcium-hydroxyapatite reinforced collagen scaffolds were populated with autologous osteoblasts and implanted into sheep maxillary sinus. After 8, 16 and 24 weeks MDCT and fp-VCT scans were performed to investigate the volume of the augmented area; densities of cancellous and compact bone were assessed as comparative values. fp-VCT imaging resulted in higher spatial resolution, which was advantageous when separating closely related anatomical structures (i.e. trabecular and compact bone, biomaterials). Fp-VCT facilitated imaging of alterations occurring in test specimens over time. fp-VCTs therefore displayed high volume coverage, dynamic imaging potential and superior performance when investigating superfine bone structures and bone remodelling of biomaterials. Thus, fp-VCTs may be a suitable instrument for intraoperative imaging and future in vivo tissue-engineering studies.