Search

Crystallization of amorphous materials by thermal annealing has been investigated for numerous applications in the fields of nanotechnology, such as thin-film transistors and thermoelectric devices. The phase transition and shape evolution of amorphous germanium (Ge) and Ag@Ge core–shell nanoparticles with average diameters of 10 and 12 nm, respectively, were investigated by high-energy electron beam irradiation and in situ heating within a transmission electron microscope. The transition of a single Ge amorphous nanoparticle to the crystalline diamond cubic structure at the atomic scale was clearly demonstrated. Depending on the heating temperature, a hollow Ge structure can be maintained or transformed into a solid Ge nanocrystal through a diffusive process during the amorphous to crystalline phase transition. Selected area diffraction patterns were obtained to confirm the crystallization process. In addition, the thermal stability of Ag@Ge core–shell nanoparticles with an average core of 7.4 and a 2.1 nm Ge shell was studied by applying the same beam conditions and temperatures. The results show that at a moderate temperature (e.g., 385 °C), the amorphous Ge shell can completely crystallize while maintaining the well-defined core–shell structure, while at a high temperature (e.g., 545 °C), the high thermal energy enables a freely diffusive process of both Ag and Ge atoms on the carbon support film and leads to transformation into a phase segregated Ag–Ge Janus nanoparticle with a clear interface between the Ag and Ge domains. This study provides a protocol as well as insight into the thermal stability and strain relief mechanism of complex nanostructures at the single nanoparticle level with atomic resolution.

Solid solutions of Yb2-xAxCdSb2 (A = Ca, Sr, Eu; x ≤ 1) are of interest for their promising thermoelectric (TE) properties. Of these solid solutions, Yb2-xCaxCdSb2 has end members with different crystal structures. Yb2CdSb2 crystallizes in the polar space group Cmc21, whereas Ca2CdSb2 crystallizes in the centrosymmetric space group Pnma. Other solid solutions, Yb2-xAxCdSb2 (A = Sr, Eu), crystallize in the polar space group for x ≤ 1, and compositions with x ≥ 1 have not been reported. Both structure types are composed of corner-sharing CdSb4 tetrahedra condensed into sheets that differ by the stacking of the layers. Single crystals of the solid solution Yb2-xCaxCdSb2 (x = 0-1) were studied to elucidate the structural transition between the Yb2CdSb2 and Ca2CdSb2 structure types. For x ≤ 1, the structures remain in the polar space group Cmc21. As the Ca content is increased, a positional disorder arises in the intralayer cation sites (Yb2/Ca2) and the Cd site, resulting in inversion of the CdSb4 tetrahedral chain. This phenomenon could be indicative of an intergrowth of the opposing space group. The TE properties of polycrystalline samples of Yb2-xCaxCdSb2 (x ≤ 1) were measured from 300 to 525 K. The lattice thermal conductivity is extremely low (0.3-0.4 W/m·K) and the Seebeck coefficients are high (100-180 μV/K) across the temperature range. First-principles calculations show a minimum in the thermal conductivity for the x = 0.3 composition, in good agreement with experimental data. The low thermal conductivity stems from the acoustic branches being confined to low frequencies and a large number of phonon scattering channels provided by the localized optical branches. The TE quality factor of the Yb1.7A0.3CdSb2 (A = Ca, Sr, Eu) series has been calculated and predicts that the A = Ca and Sr solid solutions may not improve with carrier concentration optimization but that the Eu series is worthy of additional modifications. Overall, the x = 0.3 compositions provide the highest zT because they provide the best electronic properties with the lowest thermal conductivity.

Yb 14 MnSb 11 and Yb 14 MgSb 11 are among the best p-type high-temperature (>1200 K) thermoelectric materials, yet other compounds of this Ca 14 AlSb 11 structure type have not matched their stability and efficiency. First-principles computations show that the features in the electronic structures that have been identified to lead to high thermoelectric performances are present in Yb 14 ZnSb 11 , which has been presumed to be a poor thermoelectric material. We show that the previously reported low power factor of Yb 14 ZnSb 11 is not intrinsic and is due to the presence of a Yb 9 Zn 4+ x Sb 9 impurity uniquely present in the Zn system. Phase-pure Yb 14 ZnSb 11 synthesized through a route avoiding the impurity formation reveals its exceptional high-temperature thermoelectric properties, reaching a peak zT of 1.2 at 1175 K. Beyond Yb 14 ZnSb 11 , the favorable band structure features for thermoelectric performance are universal among the Ca 14 AlSb 11 structure type, opening the possibility for high-performance thermoelectric materials.

A rare-earth-containing compound, ytterbium aluminium antimonide, Yb3AlSb3(Ca3AlAs3-type structure), has been successfully synthesized within the Yb–Al–Sb system through flux methods. According to the Zintl formalism, this structure is nominally made up of (Yb2+)3[(Al1−)(1b– Sb2−)2(2b– Sb1−)], where1band2bindicate 1-bonded and 2-bonded, respectively, and Al is treated as part of the covalent anionic network. The crystal structure features infinite corner-sharing AlSb4tetrahedra, [AlSb2Sb2/2]6−, with Yb2+cations residing between the tetrahedra to provide charge balance. Herein, the synthetic conditions, the crystal structure determined from single-crystal X-ray diffraction data, and electronic structure calculations are reported.

With the emergence of graphene, the first two-dimensional (2D) material, many other 2D materials have been discovered and examined for novel applications. Various synthesis approaches have been emp...

The structure, magnetic properties, and 151Eu and 119Sn Mossbauer spectra of the solid-solution Eu11–xSrxZn4Sn2As12 are presented. A new commensurately modulated structure is described for Eu11Zn4S...

The rapid rise of atmospheric CO2 has spurred keen research interest in sustainable energy technologies including thermoelectric materials which can reliably and robustly turn heat directly to elec...

Microwave-assisted heating methods have been used to synthesize oleylamine-capped Ge1–xSnx nanocrystals. By varying the reaction temperature while keeping the Ge and Sn precursor concentrations con...

Thermoelectric materials can convert heat into electricity. They are used to generate electricity when other power sources are not available or to increase energy efficiency by recycling waste heat. The Yb21Mn4Sb18 phase was previously shown to have good thermoelectric performance due to its large Seebeck coefficient (∼290 μV K−1) and low thermal conductivity (0.4 W m−1 K−1). These characteristics stem respectively from the unique [Mn4Sb10]22− subunit and the large unit cell/site disorder inherent in this phase. The solid solutions, Yb21Mn4−xCdxSb18 (x = 0, 0.5, 1.0, 1.5) and Yb21−yCayMn4Sb18 (y = 3, 6, 9, 10.5) have been prepared, their structures characterized and thermoelectric properties from room temperature to 800 K measured. A detailed look into the structural disorder for the Cd and Ca solid solutions was performed using synchrotron powder X-ray diffraction and pair distribution function methods and shows that these are highly disordered structures. The substitution of Cd gives rise to more metallic behavior whereas Ca substitution results in high resistivity. As both Cd and Ca are isoelectronic substitutions, the changes in properties are attributed to changes in the electronic structure. Both solid solutions show that the thermal conductivities remain extremely low (∼0.4 W m−1 K−1) and that the Seebeck coefficients remain high (>200 μV K−1). The temperature dependence of the carrier mobility with increased Ca substitution, changing from approximately T−1 to T−0.5, suggests that another scattering mechanism is being introduced. As the bonding changes from polar covalent with Yb to ionic for Ca, polar optical phonon scattering becomes the dominant mechanism. Experimental studies of the Cd solid solutions result in a max zT of ∼1 at 800 K and, more importantly for application purposes, a ZTavg ∼ 0.6 from 300 K to 800 K.

Here we report the synthesis and characterization of three quaternary complex chalcogenides, Ag0.72Bi5.48Cu0.88S9 (I), Ag0.70Bi5.30Cu1.3S9 (II), Ag0.34Bi4.54Cu1.98PbS9 (III). All the compounds in this homologous series crystallize in the C2/m space group and can be described as Pavonite structures. This structure type consists of alternating NaCl-like layers with varied thickness (nP), separated by a pair of square pyramids. All the compounds reported here are synthetic analogues of the n = 4 pavonite family and are known as makovickyite minerals. Compounds I–III possess complex crystal structures, consisting of mixed occupancies of Bi/Ag/Pb sites, as well as partially occupied Cu sites. These intrinsic assets lead to ultra-low lattice thermal conductivities, in the range of 0.75–0.42 Wm−1 K−1 from 300–500 K, and make these materials promising candidates for thermoelectric applications. All three structures exhibit very narrow indirect band gaps of less than 0.5 eV as confirmed by DRS measurements. Charge transport properties are consistent with n-type semiconducting behavior with moderate electrical conductivities and large Seebeck coefficients. Low temperature electrical resistivity and Seebeck coefficient measurements are also performed on II. A promising figure of merit, zT, of 0.09 for I and II, 0.11 for III can be achieved at 475 K.

Yb14MnSb11 is a p-type high-temperature thermoelectric material with operational temperatures as high as 1273 K. Rare-earth (RE) substitution into this phase has been shown to increase the melting ...

The mineral Zlatogorite, CuNiSb2, was synthesized in the laboratory for the first time by annealing elements at ambient pressure (CuNiSb2-AP). Rietveld refinement of synchrotron powder X-ray diffraction data indicates that CuNiSb2-AP crystallizes in the NiAs-derived structure (P3m1, #164) with Cu and Ni ordering. The structure consists of alternate NiSb6 and CuSb6 octahedral layers via face-sharing. The formation of such structure instead of metal disordered NiAs-type structure (P63/mmc, #194) is validated by the lower energy of the ordered phase by first-principle calculations. Interatomic crystal orbital Hamilton population, electron localization function, and charge density analysis reveal strong Ni-Sb, Cu-Sb, and Cu-Ni bonding and long weak Sb-Sb interactions in CuNiSb2-AP. The magnetic measurement indicates that CuNiSb2-AP is Pauli paramagnetic. First-principle calculations and experimental electrical resistivity measurements reveal that CuNiSb2-AP is a metal. The low Seebeck coefficient and large thermal conductivity suggest that CuNiSb2 is not a potential thermoelectric material. Single crystals were grown by chemical vapor transport. The high pressure sample (CuNiSb2-8 GPa) was prepared by pressing CuNiSb2-AP at 700 °C and 8 GPa. However, the structures of single crystal and CuNiSb2-8 GPa are best fit with a disordered metal structure in the P3m1 space group, corroborated by transmission electron microscopy.

We report a systematic study on the synthesis of highly monodisperse hollow Ge nanoparticles via galvanic replacement reactions between GeI2 and Ag NPs. By fine-tuning the synthetic parameters such...

The numerous electronic and optoelectronic applications that rely on semiconductors require tuning their properties through doping. Germanium quantum dots (Ge QDs) were successfully doped with bism...

Indirect ligand exchange methods have been demonstrated to replace the oleylamine capping with dodecanethiol for germanium nanocrystals (Ge NCs). In these methods, hydrazine is employed to effectiv...

We report on a solution-growth based method to synthesise single crystals of Y$_2$Co$_3$ and on its structural and magnetic properties. We find that Y$_2$Co$_3$ crystallizes in the La2Ni3-type orthorhombic structure with space group Cmce (No. 64), with Co forming distorted kagome lattices. Y$_2$Co$_3$ orders antiferromagnetically below $T_N$ = 252 K. Magnetization measurements reveal that the moments are primarily aligned along the b axis with evidence for some canting. Band-structure calculations indicate that ferromagnetic and antiferromagnetic orders are nearly degenerate, at odds with experimental results. Magnetization measurements under pressure up to 1 GPa reveal that the N/'eel temperature decreases with the slope of -1.69 K/GPa. We observe a field-induced spin-flop transition in the magnetization measurements at 1.5 K and 21 T with magnetic field along the b direction. The magnetization is not saturated up to 35 T, indicating that the antiferromagnetic ordering in Y$_2$Co$_3$ is quite robust, which is surprising for such a Co-rich intermetallic.

Multimetallic clusters can be described as building blocks in intermetallics, compounds prepared from all metals and/or semi-metals, and in Zintl phases, a subset of intermetallics containing metals with large differences in electronegativity. In many cases, these intermetallic and Zintl phases provide the first clue for the possibilities of bond formation between metals and semi-metals. Recent advances in multimetallic clusters found in Zintl phases and nanoparticles focusing on Ge with transition metals and semi-metals is presented. Colloidal routes to Ge nanocrystals provide an opportunity for kinetically stabilized Ge-metal and Ge-semi-metal bonding. These routes provide crystalline nanoclusters of Ge, hereafter referred to as nanocrystals, that can be structurally characterized. Compositions of Ge nanocrystals containing transition metals, and the semi-metals, Sb, Bi, and Sn, whose structures have recently been elucidated through EXAFS, will be presented along with potential applications.

Solid solutions of Yb

Composite phases have been shown to improve both the thermoelectric efficiency and mechanical properties of materials. Here, we demonstrate an improved thermoelectric figure of merit, power factor,...

FeAs2−xSex (x = 0.30–1.0) samples were synthesized as phase pure powders by conventional solid-state techniques and as single crystals (x = 0.50) from chemical vapor transport. The composition of the crystals was determined to be Fe1.025(3)As1.55(3)Se0.42(3), crystallizing in the marcasite structure type, Pnnm space group. FeAs2−xSex (0 < x < 1) was found to undergo a marcasite-to-arsenopyrite (P21/c space group) structural phase transition at x ∼ 0.65. The structures are similar, with the marcasite structure best described as a solid solution of As/Se, whereas the arsenopyrite has ordered anion sites. Magnetic susceptibility and thermoelectric property measurements from 300–2 K were performed on single crystals, FeAs1.50Se0.50. Paramagnetic behavior is observed from 300 to 17 K and a Seebeck coefficient of −33 μV K−1, an electrical resistivity of 4.07 mΩ cm, and a very low κl of 0.22 W m−1 K−1 at 300 K are observed. In order to determine the impact of the structural transition on the high-temperature thermoelectric properties, polycrystalline FeAs2−xSex (x = 0.30, 0.75, 0.85, 1.0) samples were consolidated into dense pellets for measurements of thermoelectric properties. The x = 0.85 sample shows the best thermoelectric performance. The electronic structure of FeAsSe was calculated with DFT and transport properties were approximately modeled above 500 K.

Thermoelectric materials are a unique class of compounds that can recycle energy through conversion of heat into electrical energy. A new 21–4–18 Zintl phase has been discovered in the Yb–Mn–Sb sys...

The reduction of Ge halides in oleylamine (OAm) provides a simple, yet effective high-yield synthetic route to germanium nanocrystals (NCs). Significant advances based on this approach include size...

Topological insulators (TIs) are a class of materials that can exhibit robust spin polarizations at the surfaces and have attracted much attention toward spintronic applications. Here, we optimized...

Yb14MnSb11 is a member of a remarkable structural family of compounds that are classified according to the concept of Zintl. This structure type, of which the prototype is Ca14AlSb11, provides a flexible framework for tuning structure-property relationships and hence the physical and chemical properties of compounds. Compounds within this family show exceptional high temperature thermoelectric performance at temperatures above 300 K and unique magnetic and transport behavior at temperatures below 300 K. This review provides an overview of the structure variants, the magnetic properties, and the thermoelectric properties. Suggestions for directions of future research are provided.

The Zintl phases, Yb14 MSb11 (M = Mn, Mg, Al, Zn), are now some of the highest thermoelectric efficiency p-type materials with stability above 873 K. Yb14MnSb11 gained prominence as the first p-type thermoelectric material to double the efficiency of SiGe alloy, the heritage material in radioisotope thermoelectric generators used to power NASA's deep space exploration. This study investigates the solid solution of Yb14Mg1-x Al x Sb11 (0 ≤ x ≤ 1), which enables a full mapping of the metal-to-semiconductor transition. Using a combined theoretical and experimental approach, we show that a second, high valley degeneracy (N v = 8) band is responsible for the groundbreaking performance of Yb14 MSb11 This multiband understanding of the properties provides insight into other thermoelectric systems (La3-x Te4, SnTe, Ag9AlSe6, and Eu9CdSb9), and the model predicts that an increase in carrier concentration can lead to zT > 1.5 in Yb14 MSb11 systems.

Zintl phases have been recognized as an important class of materials that have good properties for thermoelectric applications. Zintl phases are intermetallic compounds that are semiconductors with complex structures and a mix of ionic and covalent bonding. These structure types are composed of elements that display ionic bonding or covalent bonding and can be tuned in multiple fashions to provide efficient thermoelectric materials. The covalent bonding provides unique 0D clusters, 1D chains, 2D layers, and 3D frameworks that are interspersed and valence satisfied with alkaline earth, alkali metal, or rare earth cations. Because both the anionic framework and the cations can be alio- or isovalently substituted, a vast array of new compounds can be synthesized, and precise tuning of properties can be achieved. The combination of both ionic and covalent bonding within a semiconducting structure makes this an ideal phonon-glass electron-crystal class of compounds. This chapter will outline some of the most recent successes for thermoelectrics and suggest directions for new endeavors.

Correction for ‘Measured and simulated thermoelectric properties of FeAs2−xSex (x = 0.30–1.0): from marcasite to arsenopyrite structure’ by Christopher J. Perez et al., Mater. Adv., 2020, 1, 1390–1398, DOI: 10.1039/D0MA00371A.