Search

In this work, the perovskite LaZnO 3 was synthesized via sol-gel method and applied for photocatalytic treatment of sulfamethizole (SMZ) antibiotics under visible light activation. SMZ was almost completely degraded (99.2% ± 0.3%) within 4 hr by photocatalyst LaZnO 3 at the optimal dosage of 1.1 g/L, with a mineralization proportion of 58.7% ± 0.4%. The efficient performance of LaZnO 3 can be attributed to its wide-range light absorption and the appropriate energy band edge levels, which facilitate the formation of active agents such as ·O 2 - , h + , and ·OH. The integration of RP-HPLC/Q-TOF-MS and DFT-based computational techniques revealed three degradation pathways of SMZ, which were initiated by the deamination reaction at the aniline ring, the breakdown of the sulfonamide moieties, and a process known as Smile-type rearrangement and SO 2 intrusion. Corresponding toxicity of SMZ and the intermediates were analyzed by quantitative structure activity relationship (QSAR), indicating the effectiveness of LaZnO 3 -based photocatalysis in preventing secondary pollution of the intermediates to the ecosystem during the degradation process. The visible-light-activated photocatalyst LaZnO 3 exhibited efficient performance in the occurrence of inorganic anions and maintained high durability across multiple recycling tests, making it a promising candidate for practical antibiotic treatment., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

Mesoporous silica nanoparticles (MSN) were synthesised and functionalised with triethylenetetramine (MSN-TETA). The samples were fully characterised (transmission electron microscopy, small angle X-ray scattering, Fourier transform infrared spectroscopy, thermogravimetric analysis, zeta potential and nitrogen adsorption/desorption isotherms) and used as carriers for the adsorption of the antimicrobial drug sulphamethizole (SMZ). SMZ loading, quantified by UV-Vis spectroscopy, was higher on MSN-TETA (345.8 mg g -1 ) compared with bare MSN (215.4 mg g -1 ) even in the presence of a lower surface area (671 vs. 942 m 2 g -1 ). The kinetics of SMZ adsorption on MSN and MSN-TETA followed a pseudo-second-order model. The adsorption isotherm is described better by a Langmuir model rather than a Temkin or Freundlich model. Release kinetics showed a burst release of SMZ from bare MSN samples (k 1 = 136 h -1 ) in contrast to a slower release found with MSN-TETA (k 1 = 3.04 h -1 ), suggesting attractive intermolecular interactions slow down SMZ release from MSN-TETA. In summary, the MSN surface area did not influence SMZ adsorption and release. On the contrary, the design of an effective drug delivery system must consider the intermolecular interactions between the adsorbent and the adsorbate.

The widespread occurrence of sulfonamides (SAs) in natural waters, wastewater, soil and sediment has raised increasing concerns about their potential risks to human health and ecological systems. Sulfate radical (SO 4 - )-based advanced oxidation processes (SR-AOPs) have become promising technologies to remove such contaminants in the environment. The present study systematically investigated the degradation of four selected SAs with different five-membered heterocyclic rings, namely, sulfamethoxazole (SMX), sulfisoxazole (SIX), sulfathiazole (STZ), and sulfamethizole (SMT), by thermo-activated persulfate (PS) process, and the role of heterocyclic rings was assessed particularly. The results revealed that all the selected SAs could be degraded efficiently by thermo-activated PS process and their decay rates were appreciably increased with increasing temperature. For instance, degradation rates of STZ increased from 0.3 × 10 -3 to 19.5 × 10 -3  min -1 as the temperature was increased from 30 to 60 °C. Under the same experimental conditions, the degradation rates of SAs followed the order of SIX > SMX ≈ STZ > SMT, which was in accordance with decay rates of their R-NH 2 moieties. Kinetic results indicated that five-membered heterocyclic rings could serve as reactive moieties toward SO 4 - attack, which were confirmed by frontier electron density (FED) calculations. Based on the transformation products identified by high-resolution mass spectrometry (HR-MS), five different oxidation pathways, including hydroxylation, aniline moiety oxidation, dimerization, sulfonamide bond cleavage, and heterocyclic ring oxidation/cleavage were proposed. Moreover, the degradation efficiency in real surface water (RSW) was found to be slightly slower than that in artificial surface water (ASW), suggesting that SR-AOPs could be an efficient approach for remediation of soil and water contaminated by these SAs., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Sulfamethazine (SMZ) (1) is an antibacterial sulfa drug which suppresses the synthesis of dihydrofolic acid. It is used for the treatment of infections in livestock; such as gastrointestinal, and respiratory tract infections. During the current study, synthesis, characterization, and evaluation of immunomodulatory activities of derivatives of sulfamethazine (SMZ) (3-39) was carried out. These derivatives were synthesized by the reaction of sulfamethazine with a range of acid chlorides. All the compounds were characterized by using modern spectroscopic techniques, such as 1H-, and 13C-NMR, EI-MS, and HRFAB-MS. Compounds 3-10, 14, and 15 were identified as new compounds. Immunomodulatory effect of compounds 3-39 on different parameters of innate immune response was evaluated, including the production of Reactive Oxygen Species (ROS) from human whole blood and isolated polymorphonuclear neutrophils (PMNs), nitric oxide (NO), and pro-inflammatory cytokine TNF-α. All the new compounds, except 14 and 15, showed a significant anti-inflammatory activity. Compounds 3-39 were also evaluated for their anti-bacterial activity and cytotoxicity (3T3 mouse fibroblast cell lines). All the compounds were found to be non-cytotoxic against normal cell lines., Competing Interests: The authors have declared that no competing interests exist.

The occurrence and transportation of antibiotics in biofilms from natural and engineered sources have attracted increasing interests. Nevertheless, the effects of extracellular polymeric substances (EPS) on the responses of biofilms to the exposure to antibiotics are not clear. In this study, the effects of EPS on the sorption and biological responses to one representative antibiotic, sulfamethizole (STZ), in model biofilms were investigated. Proteins dominated the interactions between the EPS and the STZ and the EPS from a moving bed biofilm reactor exhibited the strongest interaction with the STZ. The EPS served as important reservoirs for the STZ and the tested biofilms all showed reduced sorption capacities for the STZ after the EPS were extracted. The respiratory rates and typical enzymatic activities were reduced after the EPS were extracted. High-throughput 16S rRNA gene sequencing results confirmed that the bacterial community in the biofilm without the EPS was more vulnerable to antibiotic shock as indicated by the community diversity and richness indices. A greater increase in the abundance of susceptible species was observed in the natural biofilm. The results comprehensively suggested that the EPS played important role in biosorption of STZ and alleviated the direct damage of the antibiotic to the cells; in addition the extent of the bacterial community response was associated with the origins of the biofilms. Our study provided details on the responses of multi-species biofilms to the exposure to an antibiotic and highlighted the role of the EPS in interacting with the antibiotic, thereby providing a deeper understanding of the bioremediation of antibiotics in real-life natural and engineered biofilm systems., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Antibiotic-resistant infections kill approximately 23,000 people and cost $20,000,000,000 each year in the United States alone despite the widespread use of small-molecule antimicrobial combination therapy. Antibiotic combinations typically have an additive effect: the efficacy of the combination matches the sum of the efficacies of each antibiotic when used alone. Small molecules can also act synergistically when the efficacy of the combination is greater than the additive efficacy. However, synergistic combinations are rare and have been historically difficult to identify. High-throughput identification of synergistic pairs is limited by the scale of potential combinations: a modest collection of 1,000 small molecules involves 1 million pairwise combinations. Here, we describe a high-throughput method for rapid identification of synergistic small-molecule pairs, the overlap2 method (O2M). O2M extracts patterns from chemical-genetic datasets, which are created when a collection of mutants is grown in the presence of hundreds of different small molecules, producing a precise set of phenotypes induced by each small molecule across the mutant set. The identification of mutants that show the same phenotype when treated with known synergistic molecules allows us to pinpoint additional molecule combinations that also act synergistically. As a proof of concept, we focus on combinations with the antibiotics trimethoprim and sulfamethizole, which had been standard treatment against urinary tract infections until widespread resistance decreased efficacy. Using O2M, we screened a library of 2,000 small molecules and identified several that synergize with the antibiotic trimethoprim and/or sulfamethizole. The most potent of these synergistic interactions is with the antiviral drug azidothymidine (AZT). We then demonstrate that understanding the molecular mechanism underlying small-molecule synergistic interactions allows the rational design of additional combinations that bypass drug resistance. Trimethoprim and sulfamethizole are both folate biosynthesis inhibitors. We find that this activity disrupts nucleotide homeostasis, which blocks DNA replication in the presence of AZT. Building on these data, we show that other small molecules that disrupt nucleotide homeostasis through other mechanisms (hydroxyurea and floxuridine) also act synergistically with AZT. These novel combinations inhibit the growth and virulence of trimethoprim-resistant clinical Escherichia coli and Klebsiella pneumoniae isolates, suggesting that they may be able to be rapidly advanced into clinical use. In sum, we present a generalizable method to screen for novel synergistic combinations, to identify particular mechanisms resulting in synergy, and to use the mechanistic knowledge to rationally design new combinations that bypass drug resistance.

The goals of the present study were to synthesise highly efficient Pd-TiO 2 photocatalyst, to characterise its performance in slurry in smaller scale and to investigate its performance in the aqueous photocatalytic oxidation of three antibiotics: doxycycline, sulphamethizole and amoxicillin. The performance of the photocatalyst was evaluated in an open batch slurry reactor equipped with a fluorescent long-wavelength ultraviolet (UVA) lamp (0.2 L). With the fastest degrading doxycycline, experimental research was continued in a fixed-bed continuous flow photoreactor (0.13 L), with the Pd-TiO 2 photocatalyst attached to a glass plate, and a medium laboratory-scale three-phase fluidised-bed reactor (2 L) equipped with four fluorescent UVA lamps, with the photocatalyst attached to the surface of expanded clay granules employed as the bed material. While showing very high activity in the batch slurry reactor, far surpassing P25 Aeroxide, the performance of Pd-TiO 2 with doxycycline was comparable to P25 in the semi-continuous reactors.

Blockading the interaction of programmed death-1 (PD-1) protein with its ligands (PD-Ls, such as PD-L1) was proved to be a pathway for suppressing the development of tumors and other degradations of biological species. Thus, finding PD-1 inhibitors situated at the convergence point of drug discovery. In addition to some monoclonal antibodies applied to treat cancers clinically, the screening of organic molecules for hindering the interaction of PD-1 with PD-L1 became an efficient strategy in the development of PD-1 inhibitors. We herein applied resorcinol and 3-hydroxythiophenol as the core to link with N,N-dimethylcarbamate and other alkyl-substituted amines to afford 13 amine-appended phenyl dimethylcarbamates (AAPDs). The test for blockading the combination of PD-1 with PD-L1 revealed that abilities of 13 AAPDs were higher than that of sulfamethizole, a successful PD-1 inhibitor. In particular, large hydrophobic substituents at amine moiety or a nitro at resorcinol skeleton enhanced the inhibitory effect of AAPD even higher than that of sulfamethoxypyridazine, another successful PD-1 inhibitor. The present results may provide valuable information for further investigation on synthetic PD-1 inhibitors., (Copyright © 2016 Elsevier B.V. All rights reserved.)

In this investigation, UV/H2O2, UV/H2O2/Fe(2+) (photo-Fenton) and UV/H2O2/Fe(3+) (photo-Fenton-like) systems were used to mineralize sulfamethizole (SFZ). The optimal doses of H2O2 (1-20 mM) in UV/H2O2 and iron (0.1-1 mM) in photo-Fenton and photo-Fenton-like systems were determined. Direct photolysis by UV irradiation and direct oxidation by added H2O2, Fe(2+) and Fe(3+) did not mineralize SFZ. The optimal dose of H2O2 was 10 mM in UV/H2O2 and that of iron (Fe(2+) or Fe(3+)) was 0.2 mM in both UV/H2O2/Fe(2+) and UV/H2O2/Fe(3+) systems. Under the best experimental conditions and after 60 min of reaction, the SFZ mineralization percentages in UV/H2O2, UV/H2O2/Fe(2+) and UV/H2O2/Fe(3+) systems were 16, 90 and 88%, respectively. The UV/H2O2/Fe(2+) and UV/H2O2/Fe(3+) systems effectively mineralized SFZ.

This study used Na₂S₂O₈, NaBrO8 and H₂O₂to degrade sulfadiazine (SDZ), sulfamethizole (SFZ), sulfamethoxazole (SMX) and sulfathiazole (STZ) under ultraviolet (UV) irradiation. The initial concentration of sulfonamide and oxidant in all experiments was 20 mg/L and 5 mM, respectively. The degradation rate for sulfonamides satisfies pseudo-first-order kinetics in all UV/oxidant systems. The highest degradation rate for SDZ, SFZ, SMX and STZ was in the UV/Na₂S₂O₈, UV/NaBrO₃, UV/Na₂S₂O₈ and UV/H₂O₂ system, respectively. In the UV/Na₂S₂O₈ system, the photodegradation rate of SDZ, SFZ, SMX and STZ was 0.0245 min⁻¹, 0.0096 min⁻¹, 0.0283 min⁻¹ and 0.0141 min⁻¹, respectively; moreover, for the total organic carbon removal rate for SDZ, SFZ, SMX and STZ it was 0.0057 min⁻¹, 0.0081 min⁻¹, 0.0130 min⁻¹ and 0.0106 min⁻¹, respectively. Experimental results indicate that the ability of oxidants to degrade sulfonamide varied with pollutant type. Moreover, UV/Na₂S₂O₈ had the highest mineralization rate for all tested sulfonamides.

Aqueous photocatalytic oxidation (PCO) of a non-biodegradable sulphonamide antibiotic sulfamethizole was studied. The impacts of photocatalyst dose, initial pH, and substrate concentration in the range from 1 to 100 mg L(-1) were examined with a number of organic and inorganic by-products determined, suggesting the initial break-up of the SMZ molecule at the sulphonamide bond. The experiments were carried out under artificial near-UV and visible light, and solar radiation using Degussa P25 and less efficient visible light-sensitive C-doped titanium dioxide as photocatalysts.

The 1,3,4-thiadiazole derivatives (2-amino-1,3,4-thiadiazole, acetazolamide, sulfamethizole) have been studied experimentally in the solid state by (1)H-(14)N NQDR spectroscopy and theoretically by Density Functional Theory (DFT). The specific pattern of the intra and intermolecular interactions in 1,3,4-thiadiazole derivatives is described within the QTAIM (Quantum Theory of Atoms in Molecules)/DFT formalism. The results obtained in this work suggest that considerable differences in the NQR parameters permit differentiation even between specific pure association polymorphic forms and indicate that the stronger hydrogen bonds are accompanied by the larger η and smaller ν(-) and e(2)Qq/h values. The degree of π-electron delocalization within the 1,3,4-thiadiazole ring and hydrogen bonds is a result of the interplay between the substituents and can be easily observed as a change in NQR parameters at N atoms. In the absence of X-ray data NQR parameters can clarify the details of crystallographic structure revealing information on intermolecular interactions.

The removal of sulfadiazine, sulfamethizole, sulfamethoxazole, and sulfathiazole from aqueous solution by ozonation was studied. The study was conducted experimentally in a semi-batch reactor under different experimental conditions, i.e., varying influent ozone gas concentration, bicarbonate ion concentration, and pH. The results of the study indicated that ozonation could be used to effectively remove the sulfonamides from water. The sulfonamides exhibited moderate reactivity towards aqueous ozone, k(O)(3) >2 x 10(4) M(-1)s(-1) at pH of 2 and 22 degrees C. The mol of ozone absorbed by the solution per mol of sulfonamides removed varied in the range of 5.5-12.0 with lower ranges representing ozone absorption by the solution at the beginning of the ozonation process whereas higher ratios correspond to >99.9% removal of the target sulfonamides. The removal rate of the sulfonamides improved with bicarbonate ion concentration up to 8mM but further increase in bicarbonate ion decreased removal efficiency. It was also observed that increasing the pH from 2.0 to 10.0 resulted in enhanced removal of the sulfonamides.

Absolute rate constants and degradation efficiencies for hydroxyl radical and hydrated electron reactions with four different sulfa drugs in water have been evaluated using a combination of electron pulse radiolysis/absorption spectroscopy and steady-state radiolysis/high-performance liquid chromatography measurements. For sulfamethazine, sulfamethizole, sulfamethoxazole, and sulfamerazine, absolute rate constants for hydroxyl radical oxidation were determined as (8.3 +/- 0.8) x 10(9), (7.9 +/- 0.4) x 10(9), (8.5 +/- 0.3) x 10(9), and (7.8 +/- 0.3) x 10(9) M(-1) s(-1), respectively, with corresponding degradation efficiencies of 36% +/- 6%, 46% +/- 8%, 53% +/- 8%, and 35% +/- 5%. The reduction of these four compounds by their reaction with the hydrated electron occurred with rate constants of (2.4 +/- 0.1) x 10(10), (2.0 +/- 0.1) x 10(10), (1.0 +/- 0.03) x 10(10), and (2.0 +/- 0.1) x 10(10) M(-1) s(-1), respectively, with efficiencies of 0.5% +/- 4%, 61% +/- 9%, 71% +/- 10%, and 19% +/- 5%. We propose that hydroxyl radical adds predominantly to the sulfanilic acid ring of the different sulfa drugs based on similar hydroxyl radical rate constants and transient absorption spectra. In contrast, the variation in the rate constants for hydrated electrons with the sulfa drugs suggests the reaction occurs at different reaction sites, likely the different heterocyclic rings. The results of this study provide fundamental mechanistic parameters, hydroxyl radical and hydrated electron rate constants, and degradation efficiencies that are critical for the evaluation and implementation of advanced oxidation processes (AOPs).

A method was developed for determining residual sulfonamides (SAs) such as sulfamethazine (SM2), sulfamonomethoxine (SMM), sulfamethiazole (SMZ), sulfadimethoxine (SDM) and sulfaquinoxaline (SQ) in pork and chicken using solid-phase extraction (SPE) and high performance liquid chromatography (HPLC) with a photodiode array detector. The samples were extracted with ethyl acetate. An NH2 column was used for clean up. For the HPLC determination, an Intersil ODS-2 column was used with a mixture of methanol-acetonitrile-water-acetic acid (2: 2: 9: 0.2, v/v) as the mobile phase. The detection limits (S/N = 3) were 3 microg/kg for SM2, SMM and SMZ, and 7 microg/kg for SDM and SQ. The quantitation limits (S/N = 10) were 10 microg/kg for SM2, SMM and SMZ, and 25 microg/kg for SDM and SQ. The linear ranges were 30 - 5 000 microg/L for SM2, SMM and SMZ, and 60 - 5 000 microg/L for SDM and SQ. The recoveries were between 73.2% and 97.3% with the relative standard deviations between 2.5% and 11.6% originated from the spiked level of 50 microg/kg.

The aim of this study was to increase the solubility of sulfamethizole in water by complexing it with beta-cyclodextrin (BCD) and hydroxypropyl-beta-cyclodextrin (HPBCD). The interaction of sulfamethizole with the cyclodextrins was evaluated by the solubility, 1H NMR spectrometry and molecular modelling. The stability constants calculated from the phase solubility method increase in order HPBCD

Crystal morphology and habit analyses necessary for a pharmaceutical technique have been studied by a polarizing microscope for tiny crystals of sulfamethizole, levodopa and phenobarbital listed in the Japanese Pharmacopoeia XII. Measurement of key refractive indices by an immersion method has been tried semiautomatically using photographs and the kit of immersion oils produced at 0.005 intervals, and a decision of an orientation of the section has been also carried by conoscope using photos. From the orthographic projections produced by the habit analysis of the colored photo as mentioned in the previous reports morphological and optical properties were clarified.