Search

An electrochemical sensor was developed for the sensitive and selective detection of sulfadiazine (SDZ), based on a molecularly imprinted polymer (MIP) film formed on an indium tin oxide (ITO) electrode through a self-assembly process. The SDZ-imprinted ITO electrode (SDZ-MIP/APTES-ITO) was prepared through in situ polymerization using sulfadiazine, methacrylic acid (MAA), ethylene glycol dimethacrylate (EGDMA), and 2,2'-azobisisobutyronitrile (AIBN) as the template, functional monomer, cross-linker, and initiator respectively. Before polymerization, the ITO electrode was functionalized with 3-aminopropyltriethoxysilane (APTES) to promote covalent attachment of the polymer to the electrode. After polymerization, the template molecule SDZ was removed to create selective recognition sites, forming the molecularly imprinted polymer electrode (MIP/APTES-ITO), which facilitates sulfadiazine detection. The sensor's performance was evaluated using cyclic and differential pulse voltammetry, demonstrating a linear response in the sulfadiazine concentration range 0.1 to 300 μM, with a detection limit of 0.11 μM. The MIP-based sensor exhibited good reproducibility, repeatability, selectivity, and stability in sulfadiazine detection. Its practical applicability was confirmed by the successful quantification of sulfadiazine in spiked milk samples., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Contamination of aquatic products with sulfonamide antibiotics poses a threat to consumer health and can lead to the emergence of drug-resistant bacteria. Common methods to detect such compounds are slow and require expensive instruments. We developed a sensitive sulfadiazine (SDZ) detection method based on the photoinduced electron transfer between UCNPs and Cu 2+ . The surface-modified upconversion nanoparticles bind to Cu 2+ by electrostatic adsorption, causing fluorescence quenching. The quenched fluorescence was subsequently recovered by the addition of imidazole and SDZ to the detection system, which formed a complex with Cu 2+ . The sensor showed excellent linearity over a wide concentration range (0.05-1000 ng/mL), had a low limit of detection (0.04 ng/mL), was selective, and was not affected by common substances present in aquatic media. This indicates that the sensor has great potential for application in the detection of SDZ residues in aquatic products., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The misuse of antibiotics may contaminate the environment and cause harm to human health. Therefore, rapid and accurate detection of antibiotics is essential. In this study, a novel electrochemiluminescence resonance energy transfer (ECL-RET) pair was designed using a new ECL emitter (CPM, Ce-TBAPy) as the donor and Co-MOF@AuPt as the acceptor. Moreover, a highly sensitive and specific "on-off-on" ECL aptasensor was constructed for detecting sulfadiazine (SDZ). The aptasensor exhibited a broad linear range (from 10.0 fg mL -1 to 100 ng mL -1 ) for the SDZ concentration, with limit of detection and limit of quantification values of 1.14 fg mL -1 and 3.75 fg mL -1 , respectively. The aptasensor achieved good results in spiking experiments with milk and egg samples, and successfully quantified SDZ in fish meal quality control sample. The prepared aptasensor presents great potential for food and environmental safety by detecting antibiotics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

In this study, the absorption and fluorescence characteristics of sulfa drugs, specifically Sulfadiazine (SDZ), Sulfamerazine (SMZ), and Sulfamethazine (STZ), were examined across a pH range of 1-14. The absorption and fluorescence spectra of these sulfa drugs showed significant changes depending on the pH value. Analysis of their pH-dependent absorption and fluorescence properties indicated that these sulfa drugs could used to design molecular logic gates. The absorption and fluorescence behaviors at various wavelength maxima were utilized to design IMPLICATION and Improved-INHIBIT (I-INHIBIT) molecular logic gates., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Gold nanoparticles (AuNPs) were extensively employed for in-situ detection sulfadiazine (SDZ) residues, yet current synthesis methods suffer from complex procedures, reagent pollution of the environment, and low particle quality. This study presents a novel synthesis method using discarded longan seed extract as a reducing agent to synthesized high-quality AuNPs, and then can be used for in-situ SDZ detection. Response surface methodology (RSM) was employed to optimize synthesis parameters, which resulted in five optimal combinations that enhanced the flexibility of synthesis. These AuNPs, ranging in size from 18.26 nm to 33.8 nm with zeta potentials from - 29.5 mV to - 14.3 mV, were successfully loaded with functional groups from longan seed extract. In the detection of SDZ, the colorimetric aptasensor demonstrated excellent sensitivity and selectivity over other antibiotics with a limit of detection and quantification at 70.98 ng·mL -1 and 236.59 ng·mL -1 in the concentration range of 200-800 ng·mL -1 . Recoveries of spiked SDZ samples ranged from 97.90% to 106.7%, with RSD values below 9.25%. Meanwhile, the aptasensor exhibited exceptional diagnostic efficacy (AUC: 0.976) compared to UV absorption methods in the ROC evaluation. In conclusion, this study highlights the potential of using AuNPs synthesized from longan seed extract coupled with aptamer technology as a straightforward detection method for SDZ in river water, offering promising applications in environmental monitoring., (© 2024. The Author(s), under exclusive licence to Springer Nature B.V.)

Activated sludge extracellular polymeric substances (ASEPSs) comprise most dissolved organic matters (DOMs) in the tail water. However, the understanding of the link between the photolysis of antibiotic and the photo-reactivity/photo-persistence of ASEPS components is limited. This study first investigated the photochemical behaviors of ASEPS's components (humic acids (HA), hydrophobic substances (HOS) and hydrophilic substances (HIS)) separated from municipal sludge's EPS (M-EPS) and nitrification sludge's EPS (N-EPS) in the photolysis of sulfadiazine (SDZ). The results showed that 60% of SDZ was removed by the M-EPS, but the effect in the separated components was weakened, and only 24% - 39% was degraded. However, 58% of SDZ was cleaned by HOS in N-EPS, which was 23% higher than full N-EPS. M-EPS components had lower steady-state concentrations of triplet intermediates ( 3 EPS*), hydroxyl radicals (·OH) and singlet oxygen ( 1 O 2 ) than M-EPS, but N-EPS components had the highest concentrations (5.96 ×10 -15 , 8.44 ×10 -18 , 4.56 ×10 -13 M, respectively). The changes of CO, C-O and O-CO groups in HA and HOS potentially correspond to reactive specie's generation. These groups change little in HIS, which may make it have radiation resistance. HCO - 3 and NO - 3 decreased the indirect photolysis of SDZ, and its by-product N-(2-Pyrimidinyl)1,4-benzenediamine presents high environmental risk., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Sulfonamide antibiotics (SAs) are widely used as a broad-spectrum antibiotic, leading to global concerns due to their potential soil accumulation and subsequent effects on ecosystems. SAs often exhibit remarkable environmental persistence, necessitating further investigation to uncover the ultimate destiny of these molecules. In this work, molecular dynamics simulations combined with complementary quantum chemistry calculations were employed to investigate the influence of pH on the behavior of sulfadiazine (SDZ, a typical SAs) in soil particle models (silica, one of the main components of soil). Meanwhile, the quantification of SDZ molecules aggregation potential onto silica was further extended. SDZ molecules tend to form a monolayer on the soil surface under acidic conditions while forming aggregated adsorption on the surface under neutral conditions. Due to the hydrophilicity of the silica, multiple hydration layers would form on its surface, hindering the further adsorption of SDZ molecules on its surface. The calculated soil-water partition coefficient (P soil/water ) of SDZ+ and SDZ were 9.01 and 7.02, respectively. The adsorption evaluation and mechanisms are useful in controlling the migration and transformation of SAs in the soil environment. These findings provide valuable insights into the interactions between SDZ and soil components, shedding light on its fate and transport in the environment., Competing Interests: Declaration of competing interest The authors declare no competing financial interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this work, an electric field-enhanced heterogeneous catalytic ozonation (EHCO) was systematically investigated using a prepared FeOx/PAC catalyst. The EHCO process exhibited high sulfadiazine (SDZ) and TOC removal efficiency compared with electrocatalysis (EC) and heterogeneous catalytic ozonation (HCO) process. Almost 100% of SDZ was removed within 2 min, and the TOC removal reached approximately 85% within 60 min. Quenching experiments and EPR analysis suggested that the prominent SDZ and TOC removal performance is supported by the enhanced ·OH generation ability. Further study proved that H 2 O 2 formed by O 2 electrochemical reduction, peroxone reaction and electrochemical reduction of ozone contributed to improving ·OH generation. Furthermore, the EHCO system showed satisfactory stability and recyclability compared to conventional HCO systems, and the SDZ and TOC removal rates were maintained at ≥95% and ≥70% in 16 consecutive recycles, respectively. Meanwhile, XPS analysis and Boehm's titration for the FeOx/PAC catalyst used in HCO and EHCO process confirmed that the external electron supply could restrain the oxidation of surface functional groups of PAC and maintain a balance of the Fe(II)/Fe(III) ratio, which proved the critical role of cathode reduction in catalyst in situ regeneration during long consecutive recycles. In addition, the EHCO system could achieve more than 80% SDZ removal within 2 min in different water matrices. These results confirmed that the EHCO process has a wide application perspective for refractory organics removal in actual wastewater., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Background: Sulfadiazine (SDZ) is a broad-spectrum antibiotic widely used in aquaculture and animal husbandry and it is easy to remain in the water system to damage the human body. Therefore, detection and removal of sulfadiazine in water systems become critical. Nowadays, catalysts and visible light are used to degrade sulfadiazine into smaller molecules containing N and S to reduce toxicity. However, these small molecules are easily released into water and the atmosphere to be the acid rain. Therefore, it is urgent to design a sensor with the ability to detect and remove SDZ at the same time. (96) RESULTS: We designed a novel composite catalyst sensor (Sb 6 O 13 @LTA GCE) with the ability to simultaneously monitor and remove sulfadiazine. The catalyst is generated by introducing SbCl 5 into the reactive gel of LTA (Linde Type A) structure zeolite. In the hydrothermal reaction, the corrosive SbCl 5 is transferred into nanosized Sb 6 O 13 nanoparticle which is highly dispersed in the opening nano-scaled windows of the zeolite through redox and self-assembled progress. In the selected electrochemical overpotential range, the Sb 6 O 13 @LTA composited modified electrode could complete adsorption and desorption of SDZ through the electron transfer from Sb 3+ to Sb 5+ . As the catalyst is in high stability, the only loss in the whole process of recovering SDZ is a small amount of electric energy. The extra-low detection limit and the removal efficiency of Sb 6 O 13 @LTA GCE have been achieved 4.0 pM and 19.3 mg/20 mg (136) SIGNIFICANCE: The prepared novel sensor has low detection limit, high removal efficiency and high selectivity for sulfadiazine. The Sb 6 O 13 @LTA GCE sensor, which is low-cost and has a simple preparation method, exhibits good reproducibility in both seawater and cell fluid. This provides the possibility for wide application in detecting and removing SDZ in water system. (53)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Sulfonamide antibiotics (SAs) are ubiquitous in surface water and soil environments, raising considerable concerns about their risk and removal. However, the impacts of various bromide ion (Br - ) concentrations on the phytotoxicity, uptake and fate of SAs in plant growth and physiological metabolism of plants have not been well understood. Our research demonstrated that low concentrations of Br - (0.1, 0.5 mM) promoted the uptake and degradation of sulfadiazine (SDZ) in wheat and attenuated the phytotoxicity of SDZ. Additionally, we proposed a degradation pathway and identified the brominated product of SDZ (SDZ Br ), which attenuated the dihydrofolate synthesis inhibition by SDZ. The primary mechanism was that Br - reduced the level of reactive oxygen radicals (ROS) and alleviated oxidative damage. The production of SDZ Br and the high consumption of H 2 O 2 suggest the potential generation of reactive bromine species, contributing to the degradation of the electron-rich SDZ and thus reducing its toxicity. Moreover, metabolome analysis of wheat roots indicated that low concentrations of Br - stimulated the production of indoleacetic acid under SDZ stress, promoting growth and enhancing the uptake and degradation of SDZ. Conversely, high Br - (1 mM) concentration produced a deleterious effect. These findings provide valuable insights into the mechanisms of antibiotic removal, suggesting a potentially novel approach to plant-based antibiotic remediation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The monitoring of sulfadiazine (SDZ) is of great significance for food safety, environmental protection, and human health. In this study, a fluorescent aptasensor based on MnO 2 and FAM-labeled SDZ aptamer (FAM-SDZ30-1) was developed for the sensitive and selective detection of SDZ in food and environmental samples. MnO 2 nanosheets adsorbed rapidly to the aptamer through its electrostatic interaction with the base, providing the basis for an ultrasensitive SDZ detection. Molecular dynamics was used to explain the combination of SMZ1S and SMZ. This fluorescent aptasensor exhibited high sensitivity and selectivity with a limit of detection of 3.25 ng/mL and a linear range of 5-40 ng/mL. The recoveries ranged from 87.19% to 109.26% and the coefficients of variation ranged from 3.13% to 13.14%. In addition, the results of the aptasensor showed an excellent correlation with high-performance liquid chromatography (HPLC). Therefore, this aptasensor based on MnO 2 is a potentially useful methodology for highly sensitive and selective detection of SDZ in foods and environments.

In this study, on-line preconcentration and selective determination of the trace sulfadiazine (SDZ) existing in milk and hen egg white samples were realized by the capillary electrophoresis using molecularly imprinted polymer (MIP) coated capillary. The capillary coated with MIP was firstly prepared through the surface imprinted techniques, using SDZ as template molecule and dopamine as function monomer and crosslinker, and then amine-terminated poly(2-methyl-2-oxazoline) (PMOXA-NH 2 ) was introduced onto polydopamine layer to reduce the non-specific adsorption. Successful preparation of SDZ-MIP-PMOXA coating was verified by zeta potential, as well as water contact angle. The SDZ-MIP-PMOXA coated capillary performed well on-line preconcentration of SDZ and the obtained peak area of SDZ was 46 times higher than that one obtained in bare capillary using the same procedure. Then the proposed on-line preconcentration method was fully validated and displayed good linear behavior in the concentration from 5.0 to 100.0 ng/mL, with the limit of detection was low to 1.5 ng/mL; and this method presented excellent accuracy and robustness. The prepared SDZ-MIP-PMOXA coated capillary also showed high selectivity with the imprinting factor of 5.85 and good repeatability during five consecutive runs with the relative standard deviation value of peak area was 1.6%. At last, the application of the prepared SDZ-MIP-PMOXA coated capillary in the detection of SDZ in spiked food samples was investigated, and good recoveries of 98.7-109.3% were obtained., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

The valorization of poultry byproducts, like feathers (processed to feather meal), in animal feed could contribute to the presence of veterinary drugs, including antibiotics. An animal study was carried out to study the fate of sulfadiazine, trimethoprim, and oxytetracycline in feathers, plasma, and droppings of broiler chickens. Cage and floor housing, different from current farm practices, were studied. Samples were analyzed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). A longer presence of antibiotics was observed in feathers compared to plasma, with sulfadiazine being present the most. The internal presence (via blood) and the external presence (via droppings) of antibiotics in/on feathers were shown. Analysis of Escherichia coli populations, from droppings and feathers, highlighted that resistant bacteria could be transferred from droppings to feathers in floor-housed animals. The overall results suggest that feathers are a potential reservoir of antimicrobial residues and could contribute to the selection of antibiotic-resistant bacteria in the environment, animals, and humans.

In this research, a green, selective and inexpensive switchable hydrophilicity solvent-based liquid phase microextraction (SHS-LPME) procedure has been optimized for the extraction and preconcentration of sulfadiazine (SDZ) in milk, honey and water samples prior to spectrophotometric analysis. Five variables affecting the SHS-LPME procedure were optimized using chemometric-based central composite design. For the SHS-LPME procedure, analytical parameters such as linearity, limit of detection, extraction recovery and enrichment factor were 15-300 μg L -1 , 4.5 μg L -1 , 96 ± 3% and 113, respectively. The precision of the method was investigated by repeatability and reproducibility studies. The relative standard deviation from these studies was found in the range of 2.4-4.5%. The recovery of the SDZ in the samples was in the range of 94 ± 4-99 ± 2%. Collected samples were analyzed by both the SHS-LPME procedure and the reference method using flow injection-flame atomic absorption technique, and the results were compared. There was no statistically significant difference between the two methods. This showed that the SHS-LPME procedure can be safely applied to the analysis of real samples., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

It is well-established that antibiotics stored individually at their optimal pH and in appropriate solvents are stable over time. However, limited information exists on the stability of antibiotics from multiple classes when prepared and stored as a mixture prior to multiresidue analysis by mass spectrometry. This study tested the stability of antibiotic standard mixtures from eight classes [amphenicols, tetracyclines, sulfonamides, quinolones, macrolides, β-lactams, lincosamides and miscellaneous (i.e., trimethoprim)] in relation to the water:methanol ratio, presence of sodium hydroxide base (to solubilise quinolones), storage temperature, and container type including plain and silanized glass vials. Antibiotics were analysed by ultra-high-performance liquid chromatography coupled to tandem mass spectrometry. Several antibiotics, mainly quinolones, tetracyclines and macrolides, were unstable when stored as mixtures for one week regardless of the water:methanol ratio, storage temperature (4, -20 or -80 °C) and presence/absence of sodium hydroxide. Silanization of glassware improved the storage stability of quinolones and macrolides but reduced the stability of tetracyclines and other antibiotics including florfenicol amine, penicillin G, erythromycin and sulfadiazine. Our results show that several antibiotics in water:methanol are unstable when stored as a mixture and suggest a limited advantage of using base or silanized glass vials for the preparation and storage of antibiotic standards mixed together. Freshly prepared antibiotic standard mixtures are recommended for multi-residue quantitation of antibiotics. Abbreviations AMOX: amoxicillin; AMP: ampicillin; AZ: azithromycin; CAP: chloramphenicol; CE: collision energy; CTC: chlortetracycline; CIP: ciprofloxacin; DOX: doxycycline; ENO: enoxacin; ENRO: enrofloxacin; ERYTH: erythromycin; FF: florfenicol; FFA: florfenicol amine; FLU: flumequine; HDPE: high-density polyethylene; LC-MS/MS: liquid chromatography-tandem mass spectrometry; LIN: lincomycin; MRM: multiple reaction monitoring; NOR: norfloxacin; OFL-D3: ofloxacin-D3; OXO: oxolinic acid; OTC: oxytetracycline; PEN-G: penicillin G; PEN-V: penicillin V; ROX: roxithromycin; SDM: sulfadimethoxine; SDZ: sulfadiazine; SMX: sulfamethoxazole; SMZ-D4: sulfamethazine-D4; SSZ: sulfasalazine; TC: tetracycline; TAP: thiamphenicol; TILM: tilmicosin; TRIM: trimethoprim; TL: tolerance limit; VIRG: virginiamycin; UPLC-MS/MS: ultra-high pressure liquid chromatography-tandem mass spectrometry.

Antibiotics, such as sulfadiazine and sulfathiazole, are widely used in veterinary applications which can result in remains in edible animal products. Therefore, there is an immense need for a reliable, selective, sensitive, and simple analytical technique for monitoring the concentration of sulfadiazine (SDZ) and sulfathiazole (STZ) in edible animal products. In this regard, we developed a magnetic dual template molecularly imprinted polymer (MMIP) to determine the SDZ and STZ in milk samples. For the sensitive and selective extraction and determination of target analytes, MMIPs have been combined with the syringe-to-syringe magnetic solid-phase microextraction (SS-MSPME) method. In addition, we used central composite design (CCD) for the extraction of SDZ and STZ. With optimum conditions, an efficient, rapid, and convenient technique for the preconcentration and determination of SDZ and STZ in milk samples by SS-MSPME coupling with HPLC-UV was developed. Using our combined approach, the limits of detection are 0.9 and 1.3 ng mL -1 for SDZ and STZ, respectively, along with good linearity and determination coefficients higher than 0.98. Our method demonstrates a practical approach for the deduction of antibiotics in milk samples with high recoveries and selectivity., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Covalent organic frameworks (COFs) have showed expected potential in chromatographic separation due to unique structure and excellent performance. Nowadays, COF materials applied as chromatographic stationary phases is still in its infancy. Here, we modified COF materials on silica using benzene-1,4,5-tetracarboxylic dianhydride (PMDA) and 1,3,5-tris-(4-aminophenyl)triazine (TAPT) monomers by one-pot synthetic method for performing mixed-mode function, named as SiO 2 @COF. Five characterization methods including thermogravimetric analysis (TGA), scanning electron microscopy (SEM), Fourier transform infrared spectrometry (FT-IR), elemental analysis (EA) and powder X-ray diffraction (XRD) verified the morphology, structure characteristics and physicochemical properties of the materials. SiO 2 @COF for performing the separation of polar and nonpolar analytes on high performance liquid chromatography (HPLC) achieved the desired results. Retention mechanisms of the constructed SiO 2 @COF were researched via observing the effects of mobile phase with retention times. Results exhibited that the prepared stationary phase can provide various interaction modes, including hydrophobic, hydrophilic, hydrogen bonding and π-π interactions. In conclusion, the prepared SiO 2 @COF stationary phase can execute mixed-mode separation abilities and show potential for complex samples analysis., Competing Interests: Declaration of Competing Interest The authors declare no competing financial interest., (Copyright © 2021. Published by Elsevier B.V.)

Rapid-monitoring of drugs has attracted tremendous consideration owing to robust global demand for cost-effective and high effectiveness. Binary metal oxides with various morphology have been reported as electrodes for electrochemical sensor to fulfilling the clinical and enviromental requirements. In this study, strontium tungstate (SrWO 4 ) nanoflakes have been successfully prepared via the facile sonochemical method for the first time. The characteristics of as-prepared SrWO 4 are systematically measured by various analytical and spectroscopic methods. The SrWO 4 nanoflakes are utilized to modify the electrochemical electrode for the sulfadiazine (SDZ) determination. The SrWO 4 modified electrode possesses excellent electrocatalytic activity and high recognition capability for the electrochemical detection of SDZ. Impressively, the as-fabricated SrWO 4 modified electrode attainted lowest oxidation peak at +0.93 V (vs Ag/AgCl 2 ) with the limit of detection of 0.009 μM, the sensitivity of 0.123 µA µM -1 cm 2 and linear detection range of 0.05-235 μM. The enhanced performance of proposed SrWO 4 -based sensors could be attributed to the catalytic effect, large surface area, good electrical conductivity and physicochemical nature. Notably, the electrocatalytic performances of the SDZ sensors are good as compared to the previous literature, indicating the significance of the newly designed SrWO 4 modified electrode. The real-sample diagnosis by the SDZ detection in environmental sample demonstrates the proposed SrWO 4 -based sensors with good recovery range., (Copyright © 2020 The Authors. Published by Elsevier Inc. All rights reserved.)

River deltas are frequently facing salinity intrusion, thus challenging agricultural production in these areas. One adaption strategy to increasing salinity is shrimp production, which however, heavily relies on antibiotic usage. This study was performed to evaluate the effect of increasing salinity on the dissipation rates of antibiotics in tropical flooded soil systems. For this purpose, paddy top soil from a coastal Vietnamese delta was spiked with selected frequently used antibiotics (sulfadiazine, sulfamethazine, sulfamethoxazole, trimethoprim) and incubated with flood water of different salt concentrations (0, 10, 20 g L -1 ). Antibiotic concentrations were monitored in water and soil phases over a period of 112 days using liquid chromatography and tandem mass spectrometry. We found that sulfamethazine was the most persistent antibiotic in the flooded soil system (DT 50  = 77 days), followed by sulfadiazine (DT 50  = 53 days), trimethoprim (DT 50  = 3 days) and sulfamethoxazole (DT 50  = 1 days). With the exception of sulfamethoxazole, the apparent distribution coefficient increased significantly (p < 0.05) for all antibiotics in course of the incubation, which indicates an accumulation of antibiotics in soil. On a whole system basis, including soil and water into the assessment, there was no overall salinity effect on the dissipation rates of antibiotics, suggesting that common e-fate models remain valid under varying salinity.

Sulfadiazine (SDZ) is widely used in clinical treatment, livestock husbandry and aquaculture as an antibacterial agent, resulting in environmental risks. In this work, batch experiments were conducted to investigate the characteristics of SDZ biodegradation and reaction mechanisms in a nitrate anaerobic denitrifying system for the first time. The results showed that 98.52% of the SDZ, which had an initial concentration of 50 mg L -1 , was degraded after 70 h, indicating that the removal efficiency of SDZ in anaerobic denitrifying system was 55.27% higher than that in anaerobic system. Furthermore, LC-MS-MS analysis confirmed that SDZ could be degraded into 16 byproducts via 3 main degradation pathways that contained 6 different reactions. After analyzing the microbial communities of the reactor, the denitrifying bacteria and desulfurizing bacteria Desulforhabdus, Ignavibacterium, SBR1031&#95;norank, Nocardioides, etc. were highly associated with the removal of SDZ in the system. The biological toxicity test of the effluent indicated that the remaining organic matter and inorganic matter of the effluent could provide nutrients for E. coli and promote its growth. In other words, anaerobic denitrifying systems are highly efficient, simple and environmentally friendly, and have an impressive prospect in the biodegradation of sulfonamide antibiotics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The structure of 2,4-(4'-aminobenzenamine)pyrimidine ( 1 ), a pyrimidine alkaloid previously isolated from the bulbs of Scilla madeirensis (Asparagaceae, synonym Autonoë madeirensis ), has been revised. These conclusions were met via comparison of reported NMR and EIMS data with those obtained from synthetic standards. The corrected structure is the antibiotic sulfadiazine ( 2 ), which has likely been isolated as a contaminant from the site of collection. The reported bioactivity of 1 as an α 1 -adrenoceptor antagonist should instead be ascribed to sulfadiazine. Our findings appear to show another example of an anthropogenic contaminant being identified as a natural product and emphasize the importance of considering the biosynthetic origins of isolated compounds within a phylogenetic context.

Micropollution such as pharmaceutical residuals potentially compromises water quality and jeopardizes human health. This study evaluated the photo-Fenton ceramic membrane filtration toward the removal of sulfadiazine (SDZ) as a common antibiotic chemical. The batch experiments verified that the photo-Fenton reactions with as Goethite (α-FeOOH) as the photo-Fenton catalyst achieved the degradation rates of 100% within 60 min with an initial SDZ concentration of 12 mg·L -1 . Meanwhile, a mineralization rate of over 80% was obtained. In continuous filtration, a negligible removal rate (e.g., 4%) of SDZ was obtained when only filtering the feed solution with uncoated or catalyst-coated membranes. However, under Ultraviolet (UV) irradiation, both the removal rates of SDZ were significantly increased to 70% (no H 2 O 2 ) and 99% (with H 2 O 2 ), respectively, confirming the active degradation by the photo-Fenton reactions. The highest apparent quantum yield (AQY) reached up to approximately 25% when the UV 254 intensity was 100 μW·cm -2 and H 2 O 2 was 10 mmol·L -1 . Moreover, the photo-Fenton reaction was shown to effectively mitigate fouling and prevent flux decline. This study demonstrated synchronization of photo-Fenton reactions and membrane filtration to enhance micropollutant degradation. The findings are also important for rationale design and operation of photo-Fenton or photocatalytic membrane filtration systems., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2019 Elsevier B.V. All rights reserved.)

A sensitive fluorometric assay is described for the direct determination of the antibiotic sulfadiazine. Silver nanoparticles placed on graphene quantum dots (Ag NP-GQDs) were synthesized by reduction of AgNO 3 with sodium borohydride in the presence of GQDs. The growth of Ag NPs on the surface of the GQDs causes quenching of the blue fluorescence of the GQDs with an emission maximum at 470 nm by surface-enhanced energy transfer. If sulfadiazine is added, it interacts with Ag NPs and fluorescence is restored. Under optimal conditions, the fluorescence increases linearly in the sulfadiazine concentration range of 0.04-22.0 μM. The detection limit is 10 nM with relative standard deviations of 2.3 and 4.2 (at 10 μM of sulfadiazine; for n = 6) for intra- and inter-day assays. Graphical abstractSchematic representation of sulfadiazine determination using Ag NP-GQDs as a fluorescent nanoprobe.

Benefiting from the rich redox chemistry, high electrical conductivity and synergistic effect from two metal ions, the binary metal sulphides received tremendous attention in various applications. As a result, the MoS 2 -RuS 2 nanomaterial was synthesized through the simple one-pot hydrothermal technique. The electrocatalytic activity of the as-synthesized nanomaterial was exploited towards the electrochemical detection of antibiotic drug sulphadiazine (SDZ). The electrocatalytic oxidation of the SDZ exhibited lowest anodic peak potential and ehanced anodic peak current rather than other modified electrodes. Notably, an excellent electrochemical performance with very lowest limit of detection (LOD) of 0.004 μM, appreciable linear range from 0.01 μM to 598.7 μM and high sensitivity (2.333 μA μM -1  cm -2 ) was obtained at MoS 2 -RuS 2 modified electrode. Moreover, well anti-interfering property, good operational stability, repeatability and reproducibility was achieved. Facinatingly, the practicability of the modified electrode demonstrated in milk and human serum samples., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The existing form of ionizable organic contaminants (IOCs) could affect their adsorption characteristics to soil and biochar. In this study, 2 IOCs, namely, sulfadiazine and imazalil, were selected to study their adsorption by rice straw-derived biochar-amended soils, as well as the effect of pH and gallic acid on their adsorption. The results showed that the soil adsorption isotherms of the two ionizable organic contaminants could be fitted well by a linear equation and the Freundlich equation, and r 2 was more than 0.80. The adsorption coefficient (Kd) in the three kinds of soil ranged from 0.262 to 4.07 L kg -1 for sulfadiazine and from 3.11 to 96.5 L kg -1 for imazalil. After the addition of biochar, the adsorption of sulfadiazine and imazalil in the soil increased. The adsorption of sulfadiazine by biochar gradually decreased with the increase in pH; the adsorption of imazalil increased when the pH increased from 2 to 5 and then gradually decreased with increasing pH. Gallic acid enhanced the adsorption of the two IOCs to pure soil and biochar-amended soil., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Sulfonamides and their corresponding antibiotic resistance genes (ARGs) are widespread in the environment, which leads to a major threat to global health crisis. Biodegradation plays a major role in sulfonamides removal in soil ecosystem, but the degradation dynamics and the associated functional bacteria in situ remain unclear. In this study, aerobic degradation of sulfadiazine (SDZ) at two dosages (1 and 10 mg/kg) was explored for up to 70 days in two different agricultural soils. The removal of SDZ in all treatments followed first-order multi-compartment model with half-life times of 0.96-2.57 days, and DT50 prolonged with the increase of initial dosage. A total of seven bacterial genera, namely Gaiella, Clostrium&#95;sensu&#95;stricto&#95;1, Tumebacillus, Roseiflexus, Variocorax, Nocardioide and Bacillus, were proposed as the potential SDZ-degraders. sadA gene was for the first time detected in soil samples, but other functional genes might also participate in SDZ degradation. The enrichment of sulfonamide resistance genes was found after 70 days' incubation, which might result in the spread of ARGs in soil. This study can add some new insights towards SDZ degradation in soil ecosystem and provide a potential resource for the bioremediation of SDZ-contaminated soil., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Batch-type experiments were used to study adsorption-desorption of three sulfonamides: sulfadiazine (SDZ) sulfachloropyridazine (SCP), and sulfamethazine (SMT), in five crop soils, whereas laboratory soil column experiments were employed to obtain data on transport processes. Adsorption results were satisfactorily adjusted to Linear and Feundlich equations, with R 2 values above 0.95. Adsorption followed the sequence SDZ < SMT < SCP, showing higher values for soils with higher levels of organic carbon (OC) content. Conversely, desorption was higher in soils with less OC, and lower in soils with higher OC contents. The temporal moment analysis method gave values for the transport parameters τ and R which were significantly correlated with soil parameters related to organic matter, specifically OC and N concentrations. The higher retention of the three sulfonamides in soils with high organic matter content is a relevant fact, with value when programming management practices in agricultural soils, and specifically in relation to the spreading of animal manures, slurries, or waste containing these emerging pollutants., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

A molecularly imprinted polymer (MIP) anchored on the surface of CdTe quantum dots (QDs) was fabricated and used as a fluorescent probe for sulfadiazine (SDZ) detection in seawater. CdTe QDs was used as photoluminescent material, SDZ as the template, 3-aminopropyltriethoxysilane (APTES) as the functional monomer and tetraethyl orthosilicate (TEOS) as the cross-linking agent. Characterizations of MIP-QDs were analyzed by Fourier transform infrared (FT-IR), Transmission electron microscopy (TEM) and Scanning electron microscope (SEM). The conditions were optimized for the detection of MIP-QDs to SDZ. The mechanism of fluorescence quenching was studied by UV-Vis absorption spectroscopy and fluorescence spectroscopy. Under optimal conditions, the fluorescence intensity of MIP-QDs decreased linearly between 4- and 20 μM SDZ with a good correlation coefficient of 0.995. The limit of detection is 0.67 μM and the recovery is between 91.8 and 109.4% with RSD lower than 3.9%. These results indicated that MIP-QDs for SDZ detection in seawater was developed successfully., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

The antibiotic sulfadiazine (SDZ) is a challenging threat to the health of aquatic organisms, as it frequently occurs in aquatic ecosystems. Tolerance mechanisms and accumulation of SDZ in a floating macrophyte (Eichhornia crassipes) under hydroponic conditions were investigated in this study to provide more insight into the SDZ removal process. Results show that the presence of 1 mg L -1 SDZ decreased the quickest and ranged from 669.45 to 165.34 μg L -1 from days 5 to 25. Exposing E. crassipes to SDZ ( < 1 mg L -1 ) maintained stable leaf photosynthetic efficiency. The overall increase in superoxide dismutase and peroxidase activities with SDZ treatments indicated that leaves were resistant. SDZ was absorbed by E. crassipes, following the sequence of root > aerial parts under all treatments. These findings suggest that E. crassipes has the ability to phytoremediation SDZ contaminated water.

We describe herein a newly developed chemiluminescent optical fiber immunosensor (OFIS) with a tunable detection range for multiplexed analysis of veterinary drug residues with vastly different concentrations in milk samples. The optical fiber probe is used as a carrier of biorecognition element as well as a transducer, enabling a low-cost compact design, which makes this system suitable for cost-effective on-site detection of the target analytes. Importantly, the synergy between modulation of the length of the optical fiber sensing region and the number of fibers allows performing multiplexed immunoassays in an easily controllable manner over a tunable detection range from pg/mL to μg/mL analyte concentrations. By combining the optical fiber sensor with a nanocomplex signal amplification system, a highly sensitive chemiluminescent OFIS system is demonstrated for the multiplexed assaying of veterinary drug residues in milk samples with linear ranges of 10-(2 × 10 4 ) pg/mL for chloramphenicol, 0.5-500 ng/mL for sulfadiazine, and 0.1-300 μg/mL for neomycin. This controllable strategy, based on modulation of the fiber probe, provides a versatile platform for multiplexed quantitative detection of both low-abundance and high-abundance targets, which shows great potential for on-site testing in food safety.

This work present aims to evaluate the effect of a conventional wastewater treatment process on the number of nanoparticles, and the role of nanoparticles as a carrier of antibiotics. A set of methods based on asymmetrical flow field flow fractionation coupled with multi-angle light scattering to separate and quantify nanoparticles in real wastewater was established. The characterization of nanoparticles was conducted by transmission electron microscopy, energy dispersive spectrometer, UV-visible spectrophotometer and three-dimensional excitation-emission matrix fluorescence spectroscopy. The adsorption of different sizes of nanoparticles separated from the real wastewater for four targeted antibiotics (sulfadiazine, ofloxacin, tylosin and tetracycline) was studied. The results show that the number of nanoparticles were increased in the wastewater treatment process and the size range between 60 and 80 nm was predominant in wastewater samples. The nanoparticles were mainly composed of O, Si, Al and Ca elements and organic components were in the size range of 0-10 nm. Targeted antibiotics were dominantly adsorbed onto nanoparticles with 60-80 nm size range at each stage. The concentrations of tetracycline adsorbed on nanoparticles were surprisingly increased in the end of the treatment process, while ofloxacin and tylosin had the completely opposite phenomenon to tetracycline. The pH and ionic strength definitely affected the aggregation of nanoparticles and interaction with the antibiotics. It is of great significance to give insights into nanoparticle-antibiotic assemblages for the effective treatment and avoiding the water risks due to nanoparticles' ubiquitous and their risks of carrying antibiotics., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

This work describes the integration of solid-phase microextraction (SPME) and surface-enhanced Raman spectroscopy (SERS) by codeposition of a hybrid consisting of reduced graphene oxide and silver on silver-copper alloy fibers. The morphology and structure of the coating were characterized by a variety of microscopic and spectroscopic techniques that confirmed the hybrid structure of the material. A galvanic-displacement-induced process is assumed to be involved during the codeposition of the hybrid coating on the alloy. In this process, Ag(I) is reduced to Ag(0) by Cu(0), and the presence of conjugated domains in GO facilitates the long-range transfer of electrons from Cu to Ag+. Simultaneously, GO accepts electrons and is converted into RGO. The hybrid coating exhibits a high SERS enhancement factor and good spatial uniformity. The needle-like coated alloy fibers are shown to be a viable tool for non-destructive sampling and SERS-based determination of trace levels of the antibiotics sulfadiazine and sulfamethoxazole in a spiked tissue mimic. The SERS peaks at 1149 cm -1 for sulfadiazine and 1144 cm -1 for sulfamethoxazole are selected as the reference peaks in the quantitative analysis. The linear range is from 0.01 to 100 μg·cm -3 . The detection limits are 1.9 ng·cm -3 for sulfadiazine and 4.4 ng·cm -3 for sulfamethoxazole. Graphical abstract Schematic presentation of I: Galvanic-displacement-induced reduction of graphene oxide (brown films) and Ag + (purple dots) on silver-copper alloy; II: Codeposition of reduced-graphene-oxide (grey films)/Ag (blue stars) on alloy fiber; III: Non-destructive SPME of antibiotics from spiked tissue mimic; IV: SERS detection using Raman spectroscope.

Sulfadiazine is an environmental pollutant derived from abuse of antibiotics. Its content in environmental water is closely related to human health. Thus, a novel dual-emission surface molecularly imprinted nanosensor is designed for the specific adsorption and detection of sulfadiazine. In the system, blue emissive carbon quantum dots wrapped with silica served as the internal reference signal for eliminating background interference, while red emissive thioglycolic acid modified CdTe quantum dots (CdTe QDs), which are low dimensional semiconductor materials by the combination of cadmium and tellurium with excellent optical properties, were encapsulated in the imprinted layer to offer recognition signal. The fluorescence of CdTe quantum dots was quenched and the fluorescence quenching degree of carbon quantum dots was inconspicuous with the increase of concentration of sulfadiazine, thereby reflecting the color change. The detection of sulfadiazine was successfully achieved in a concentration range of 0.25-20 μmol/L with detection limit of 0.042 μmol/L and nanosensors had specific recognition for sulfadiazine over its analogues. Compared to single-emission fluorescence sensors, ratiometric fluorescence nanosensors had wider linear range and higher detection accuracy. Furthermore, the nanosensors were also successfully applied for the determination of sulfadiazine in real water and milk samples with acceptable recoveries. The study provides a feasible method for the detection of sulfadiazine and a reference for the detection of sulfonamides., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A new trend describes the development and validation of a simple, sensitive and selective kinetic spectrophotometric methods for the determination of sulfadiazine in pharmaceutical formulations has been conducted. In this paper, sulfadiazine was derivatized as a new organic compound 4(4-sulphophenylazo) pyrogallol, 4-SPAP, by coupling pyrogallol with diazotized sulfadiazine in medium of controlled pH. 4-SPAP was characterized by techniques of FT-IR, H-NMR, GC-Mass, TG and DSC thermal analysis methods. Solvatochromic behavior in solvents of various polarities was also investigated. The determination of sulfadiazine was accomplished by initial rate and fixed time methods. These methods were based on the reaction of the compound containing sulfadiazine, 4-SPAP, with Ca(II) to form colored product with a maximum absorbance at 520 nm. The two methods were adopted for constructing the calibration curves and examined for their suitability for the quantitation of sulfadiazine in pharmaceuticals. The limit of detection (LOD) and limit of quantification (LOQ) were found to be, by initial rate method, 0.35 and 1.05 μg·mL -1 and that by fixed time method were found to be 0.69 and 2.07 μg·mL -1 , respectively. The percent relative standard deviations (%RSD) for the results ranged from 1.04% to 1.76% and 0.85% to 1.42% for the initial rate and fixed time methods of the proposed kinetic spectrophotometric method, respectively. The existence of common excipients in the pharmaceutical formulation did not produce any significant interference. Statistical comparison was reported as indicated from the F- and t-test data of the proposed methods with that of reference method showing excellent agreement and indicating no significant difference in their accuracy and precision., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The cross-contamination of non-medicated feed with residues of anti-microbials (AM) causes a public and animal health concern associated with the potential for selection and dissemination of resistance. To analyse the associated risks, a probabilistic model was built using @Risk® (Palisade Corporation®) to show the potential extent of the effect of cross-contaminated pig feed on resistance selection. The results of the model include estimations of the proportion of pigs per production stage with residues of doxycycline, chlortetracycline, sulfadiazine and trimethoprim in their intestinal contents, as a result of exposure to cross-contaminated feed with different carry-over levels, in Belgium. By using a semi-quantitative approach, these estimations were combined with experimental data on AM concentrations associated with potential for resistance-selection pressure. Based on this model, it is estimated that 7.76% (min = 1.67; max = 36.94) of sows, 4.23% (min = 1.01%; max = 18.78%) of piglets and 2.8% (min = 0.51%; max = 14.9%) of fatteners in Belgium have residues of doxycycline in their intestinal tract due to consumption of feed with at least 1% carry-over. These values were estimated to be almost triple for sulfadiazine, but substantially lower for chlortetracycline and trimethoprim. Doxycycline concentrations as low as 1 mg/L (corresponding to consumed feed with at least 1% carry-over) can select for resistant porcine commensal Escherichia coli in vitro and in vivo. Conclusions on this risk could not be drawn for other AM at this stage, due to the lack of data on concentrations associated with resistance development. However, since the possibility of resistance mechanisms (e.g. co-selection) occurring cannot be excluded, the results of this model highlight that the use of AM medicated feed should be minimised where possible. In case of medicated feed production, good practice should be followed thoroughly at all levels of production, distribution, storage and administration, with a special focus on the feed distributed to piglets and sows.

A new multi-compound method for the analysis of veterinary drugs, namely tiamulin, trimethoprim, tylosin, sulfadiazine and sulfamethazine was developed and validated in medicated feeds. After extraction, the samples were centrifuged, diluted in Milli-Q water, filtered and analysed by high performance liquid chromatography coupled to tandem mass spectrometry. The separation of the analytes was performed on a biphenyl column with a gradient of 0.1% formic acid in acetonitrile and 0.1% formic acid in Milli-Q water. Quantitative validation was done in accordance with the guidelines laid down in European Commission Decision 2002/657/EC. Method performances were evaluated by the following parameters: linearity (R 2  < 0.99), precision (repeatability <14% and within-laboratory reproducibility <24%), recovery (73.58-115.21%), sensitivity, limit of detection (LOD), limit of quantification (LOQ), selectivity and expanded measurement uncertainty (k. = 2). The validated method was successfully applied to the 2 medicated feeds obtained from the interlaboratory studies and feed manufactures from Spain in August 2017. In these samples, tiamulin, tylosin and sulfamethazine were detected at the concentration levels declared by the manufacturers. The developed method can therefore be successfully used to routinely control the content and homogeneity of these antibacterial substances in medicated feed. Abbreviations AAFCO - Association of American Feed Control Officials; TYL - tylosin; TIAM - tiamulin fumarate; TRIM - trimethoprim; SDZ - sulfadiazine; SMZ - sulfamethazine; UV - ultraviolet detector; FLD - fluorescence detector; HPLC - high performance liquid chromatography; MS/MS - tandem mass spectrometry; LOD - limit of detection; LOQ - limit of quantification; CV - coefficient of variation; SD - standard deviation; U - uncertainty.

Previous studies have shown that the photodegradation of some pollutants, induced by the excited triplet states of chromophoric dissolved organic matter ( 3 CDOM*), can be inhibited by back-reduction processes carried out by phenolic antioxidants occurring in dissolved organic matter (DOM). Here, for the first time to our knowledge, we included such an inhibition effect into a photochemical model and applied the model predictions to sulfadiazine (SDZ), a sulfonamide antibiotic that occurs in surface waters in two forms, neutral HSDZ and anionic SDZ - (pK a  = 6.5). The input parameters of the photochemical model were obtained by means of dedicated experiments, which showed that the inhibition effect was more marked for SDZ - than for HSDZ. Compared to the behavior of 2,4,6-trimethylphenol, which does not undergo antioxidant inhibition when irradiated in natural water samples, the back-reduction effect on the degradation of SDZ was proportional to the electron-donating capacity of the DOM. According to the model results, direct photolysis and OH reaction would account for the majority of both HSDZ and SDZ - photodegradation in waters having low dissolved organic carbon (DOC < 1 mgC L -1 ). With higher DOC values (>3-4 mgC L -1 ) and despite the back-reduction processes, the 3 CDOM* reactions are expected to account for the majority of HSDZ phototransformation. In the case of SDZ - at high DOC, most of the photodegradation would be accounted for by direct photolysis. The relative importance of the triplet-sensitized phototransformation of both SDZ - and (most importantly) HSDZ is expected to increase with increasing DOC, even in the presence of back reduction. An increase in water pH, favoring the occurrence of SDZ - with respect to HSDZ, would enhance direct photolysis at the expense of triplet sensitization. SDZ should be fairly photolabile under summertime sunlight, with predicted half-lives ranging from a few days to a couple of months depending on water conditions., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Pig feed may contain various levels of antimicrobial residues due to cross-contamination. A previous study showed that a 3% carry-over level of doxycycline (DOX) in the feed results in porcine faecal concentrations of approximately 4 mg/L. The aim of this study was to determine the effect of residual DOX concentrations (1 and 4 mg/L) in vitro on selection of DOX-resistant porcine commensal Escherichia coli and transfer of their resistance plasmids. Three different DOX-resistant porcine commensal E. coli strains and their plasmids were characterised. These strains were each brought in competition with a susceptible strain in a medium containing 0, 1 and 4 mg/L DOX. Resistant bacteria, susceptible bacteria and transconjugants were enumerated after 24 h and 48 h. The tet(A)-carrying plasmids showed genetic backbones that are also present among human E. coli isolates. Ratios of resistant to susceptible bacteria were significantly higher at 1 and 4 mg/L DOX compared with the blank control, but there was no significant difference between 1 and 4 mg/L. Plasmid transfer frequencies were affected by 1 or 4 mg/L DOX in the medium for only one of the resistance plasmids. In conclusion, DOX concentrations of 1 and 4 mg/L can select for resistant E. coli in vitro. Further research is needed to determine the effect of these concentrations in the complex environment of the porcine intestinal microbiota., (Copyright © 2017 Elsevier B.V. and International Society of Chemotherapy. All rights reserved.)

A novel, efficient, easy to use, environmentally friendly and cost-effective methodology is developed for the indirect spectrophotometric determination of sulfadiazine in different samples. The method is based on the micelle-mediated extraction of silver sulfadiazine and converting the silver content of the resultant surfactant-rich phase to the silver nanoparticles via generation of [Ag(NH 3 ) 2 ] + followed by its chemical reduction using ascorbic acid. The changes in the amplitude of localized surface plasmon resonance peak of silver nanoparticles as a function of sulfadiazine concentration in the sample solution was monitored using fiber optic linear array spectrophotometry at 457nm. The experimental conditions were thoroughly investigated and optimized. Under the optimized condition, the developed procedure showed dynamic linear calibration within the range of 10.0-800.0μgL -1 with a detection limit of 2.8μgL -1 for sulfadiazine. The relative standard deviation of the method for six replicate measurements at 150.0μgL -1 of sulfadiazine was 4.7%. The developed method was successfully applied to the determination of sulfadiazine in different samples including well water, human urine, milk and pharmaceutical formulation., (Copyright © 2017. Published by Elsevier B.V.)

Trimethoprim is a diaminopyrimidine antibacterial agent that, like sulfonamides, inhibits bacterial folic acid synthesis, but at a different stage in the metabolic pathway. It has a similar spectrum of activity to the sulfonamides and is given by mouth or by injection, either alone or in conjunction with a sulfonamide, such as sulfadiazine. Sulfadiazine is a bacteriostatic antibacterial agent that interferes with folic acid synthesis in susceptible bacteria. The combination of the two drugs produces a synergistic effect against both Gram-positive and Gram-negative aerobic bacteria, by inhibiting enzymes in the folic acid pathways, which in turn inhibits bacterial thymidine synthesis. There are no published studies of the stability of the combination of trimethoprim and sulfadiazine in a liquid dosage form. An extemporaneously compounded suspension from pure drug powders or commercial tablets would provide an alternative option to meet unique patient needs. The purpose of this study was to determine the physicochemical stability of trimethoprim combined with sulfadiazine in PCCA base SuspendIt. PCCA base SuspendIt is a sugar-free, paraben-free, dye-free, and gluten-free thixotropic vehicle containing a natural sweetener obtained from the monk fruit. It thickens upon standing to minimize settling of any insoluble drug particles and becomes fluid upon shaking to allow convenient pouring during administration to the patient. A robust stability-indicating high-performance liquid chromatographic assay for the simultaneous determination of trimethoprim and sulfadiazine in SuspendIt was developed and validated. This assay was used to determine the chemical stability of both drugs in SuspendIt. Samples were prepared and stored under three different temperature conditions (5°C, 25°C, 40°C), and assayed using the high-performance liquid chromatographic assay at pre-determined intervals over an extended period of time as follows: 0, 7, 14, 30, 45, 60, 91, 120, and 182 days at each designated temperature. Physical data such as pH, viscosity, appearance, and average particle size were also monitored. The study showed that drug concentration did not go below 90% of the label claim (initial drug concentration) at room temperature and in the refrigerator. The pH values also did not change significantly. There was some variability in viscosity and average particle size. This study demonstrates that trimethoprim and sulfadiazine are physically and chemically stable in combination in SuspendIt for 182 days at room temperature and in the refrigerator, thus providing a viable, compounded alternative for both drugs in a liquid dosage form, with an extended beyond-use-date to meet patient needs., (Copyright© by International Journal of Pharmaceutical Compounding, Inc.)

Batch and saturated soil column experiments were conducted to investigate sorption and mobility of two 14 C-labeled contaminants, the hydrophobic chlordecone (CLD) and the sulfadiazine (SDZ), in the absence or presence of functionalized multi-walled carbon nanotubes (MWCNTs). The transport behaviors of CLD, SDZ, and MWCNTs were studied at environmentally relevant concentrations (0.1-10 mg L -1 ) and they were applied in the column studies at different times. The breakthrough curves and retention profiles were simulated using a numerical model that accounted for the advective-dispersive transport of all compounds, attachment/detachment of MWCNTs, equilibrium and kinetic sorption of contaminants, and co-transport of contaminants with MWCNTs. The experimental results indicated that the presence of mobile MWCNTs facilitated remobilization of previously deposited CLD and its co-transport into deeper soil layers, while retained MWCNTs enhanced SDZ deposition in the topsoil layers due to the increased adsorption capacity of the soil. The modeling results then demonstrated that the mobility of engineered nanoparticles (ENPs) in the environment and the high affinity and entrapment of contaminants to ENPs were the main reasons for ENP-facilitated contaminant transport. On the other hand, immobile MWCNTs had a less significant impact on the contaminant transport, even though they were still able to enhance the adsorption capacity of the soil., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

An electrochemical quartz crystal nanobalance (EQCN), which provides real-time analysis of dynamic surface events, is a valuable tool for analyzing biomolecular interactions. EQCN biosensors are based on mass-sensitive measurements that can detect small mass changes caused by chemical binding to small piezoelectric crystals. Among the various biosensors, the piezoelectric biosensor is considered one of the most sensitive analytical techniques, capable of detecting antigens at picogram levels. EQCN is an effective monitoring technique for regulation of the antibiotics below the maximum residual limit (MRL). The analysis of antibiotic residues requires high sensitivity, rapidity, reliability and cost effectiveness. For analytical purposes the general approach is to take advantage of the piezoelectric effect by immobilizing a biosensing layer on top of the piezoelectric crystal. The sensing layer usually comprises a biological material such as an antibody, enzymes, or aptamers having high specificity and selectivity for the target molecule to be detected. The biosensing layer is usually functionalized using surface chemistry modifications. When these bio-functionalized quartz crystals are exposed to a particular substance of interest (e.g., a substrate, inhibitor, antigen or protein), binding interaction occurs. This causes a frequency or mass change that can be used to determine the amount of material interacted or bound. EQCN biosensors can easily be automated by using a flow injection analysis (FIA) setup coupled through automated pumps and injection valves. Such FIA-EQCN biosensors have great potential for the detection of different analytes such as antibiotic residues in various matrices such as water, waste water, and milk.

The toxicity of ionizable organic compounds to organisms depends on the pH, which therefore affects risk assessments of these compounds. However, there is not a direct chemical method to predict the toxicity of ionizable organic compounds. To determine whether hollow-fiber liquid-phase microextraction (HF-LPME) is applicable for this purpose, a three-phase HF-LPME was used to measure sulfadiazine and estimate its toxicity to Daphnia magna in solutions of different pH. The result indicated that the sulfadiazine concentrations measured by HF-LPME decreased with increasing pH, which is consistent with the decreased toxicity. The concentration immobilize 50% of the daphnids (EC50) in 48 h calculated from nominal concentrations increased from 11.93 to 273.5 mg L -1 as the pH increased from 6.0 to 8.5, and the coefficient of variation (CV) of the EC50 values reached 104.6%. When calculated from the concentrations measured by HF-LPME (pH 12 acceptor phase), the EC50 ranged from 223.4 to 394.6 mg L -1 , and the CV decreased to 27.60%, suggesting that the concentrations measured by HF-LPME can be used to estimate the toxicity of sulfadiazine irrespective of the solution pH.

This research aimed to monitor the concentrations of sulfamethoxydiazine (SMD), sulfamethazine (SMT), sulfamethoxazole (SMX) and sulfadiazine (SDZ) in imported Pangasius catfish products in Thailand. The residues of the four sulfonamides (SAs) were analyzed by extraction process and liquid chromatography coupled with tandem mass spectrometry. The highest concentrations found were 10.97ng/g for SMD, 6.23ng/g for SMT, 11.13ng/g for SDZ and 245.91ng/g for SMX, which was higher than the European Union (EU) standard (100ng/g). Moreover, all samples contaminated with SMX also contained SMT, indicating that more than one antibiotic was used for production in the country of origin. Because Thai standards for antibiotics in food have not been completely set, all contaminated discovered would not be considered to be an illegal food, in which antibiotic residues may affect human health in the long term. Therefore, antibiotic residues in Pangasius catfish products should be continually regulated and monitored., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

This study is aimed to assess the biodegradation of sulfadiazine (SDZ) and characterization of heavy metal resistance in three pure bacterial cultures and also their chemotactic response towards 2-aminopyrimidine. The bacterial cultures were isolated from pig manure, activated sludge and sediment samples, by enrichment technique on SDZ (6 mg L-1). Based on the 16S rRNA gene sequence analysis, the microorganisms were identified within the genera of Paracoccus, Methylobacterium and Kribbella, which were further designated as SDZ-PM2-BSH30, SDZ-W2-SJ40 and SDZ-3S-SCL47. The three identified pure bacterial strains degraded up to 50.0, 55.2 and 60.0% of SDZ (5 mg L-1), respectively within 290 h. On the basis of quadrupole time-of-flight mass spectrometry and high performance liquid chromatography, 2-aminopyrimidine and 4-hydroxy-2-aminopyrimidine were identified as the main intermediates of SDZ biodegradation. These bacteria were also able to degrade the metabolite, 2-aminopyrimidine, of the SDZ. Furthermore, SDZ-PM2-BSH30, SDZ-W2-SJ40 and SDZ-3S-SCL47 also showed resistance to various heavy metals like copper, cadmium, chromium, cobalt, lead, nickel and zinc. Additionally, all three bacteria exhibited positive chemotaxis towards 2-aminopyrimidine based on the drop plate method and capillary assay. The results of this study advanced our understanding about the microbial degradation of SDZ, which would be useful towards the future SDZ removal in the environment., Competing Interests: The authors have declared that no competing interests exist.

This study presents a depletion study for sulfadiazine and trimethoprim in muscle plus skin of gilthead sea bream (Sparus aurata L.). N(4) -acetyl-sulfadiazine, the main metabolite of sulfadiazine (SDZ), was also examined. The fish were held in seawater at a temperature of 24-26 °C. SDZ and trimethoprim (TMP) were administered orally with medicated feed for five consecutive days at daily doses of 25 mg SDZ and 5 mg TMP per kg of fish body weight per day. Two different diets, fish oil- and plant oil-based diets, were investigated. Ten fish were sampled at each of the days 1, 3, 5, 6, 8, 9, 10, and 12 after the start of veterinary medicine administration. However for the calculation of the withdrawal periods, sampling day 1 was set as 24 h after the last dose of the treatment. Fish samples were analyzed for SDZ, TMP, and acetyl-sulfadiazine (AcSDZ) residues by liquid chromatography-mass spectrometry. SDZ and TMP concentrations declined rapidly from muscle plus skin. Considering a maximum residue limit of 100 μg/kg for the total of sulfonamides and 50 μg/kg for TMP residues in fish muscle plus skin, the withdrawal periods of the premix trimethoprim-sulfadiazine 50% were calculated as 5 and 6 days, at 24-26 °C, in fish oil (FO) and plant oil (PO) groups, respectively. The investigation of this work is important to protect consumers by controlling the undesirable residues in fish., (© 2016 John Wiley & Sons Ltd.)

Four typical antibiotics were added to human feces for aerobic composting using batch reactors with sawdust as the bulk matrix. Under three composting temperatures (room temperature, 35 ± 2 °C and 55 ± 2 °C), decreases in the extractable concentrations of antibiotics in the compost were monitored for 20 days. As a result, the removals of extractable tetracycline and chlortetracycline were found to be more temperature-dependent than the removals of sulfadiazine and ciprofloxacin. However, more than 90 % of all of the extractable antibiotics were removed at 55 ± 2 °C. Three specific experiments were further conducted to identify the possible actions for antibiotic removal, including self-degradation in aqueous solution, composting with a moist sterile sawdust matrix without adding feces and composting with human feces and moist sterile sawdust. As a result, it was found that the removal of tetracycline and chlortetracycline was mainly due to chemical degradation in water, whereas the removal of sulfadiazine was mainly attributed to adsorption onto sawdust particles. The microbial activity of compost varied with temperature to a certain extent, but the differences were insignificant among different antibiotics. Although microbial action is important for organic matter decomposition, its contribution to antibiotic degradation was small for the investigated antibiotics, except for ciprofloxacin, which was degraded by up to 20 % due to microbial action.

The development of a simple and effective method for the isolation and purification of sulfadiazine residues in food of animal origin is of great significance since it is a great danger to human health. An off-line molecularly imprinted solid-phase extraction with high-performance liquid chromatography method was proposed for the selective pretreatment and determination of sulfadiazine in eggs, rapidly and effectively. The molecularly imprinted polymer was proved to have a homogeneous spherical structure and porous surface morphology with excellent adsorption capacity of 5258 μg/g for sulfadiazine. The newly established method showed a good linearity in the range of 0-200 μg/L, low limits of detection (0.06 μg/L), acceptable reproducibility (RSD, 2.60-5.03%, n = 3), and satisfactory relative recoveries (78.22-86.10%). It was demonstrated that the proposed molecularly imprinted solid-phase extraction with high-performance liquid chromatography method could be applied to determine sulfadiazine in eggs, which simplified the pretreatment procedure and improved the accuracy of the analysis process by reducing the loss of sulfadiazine in the fat-removing procedure compared with traditional methods. Molecularly imprinted solid-phase extraction with excellent selectivity and adsorption capacity is a simple, rapid, selective, and effective pretreatment method for the determination of sulfadiazine in egg samples., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The objective of this study was to evaluate the feasibility of 10 commonly used active pharmaceutical ingredients (APIs) compounded in oral suspensions using an internationally used suspending vehicle (SyrSpend(®) SF PH4 liquid): (i) amlodipine, (as besylate) 1.0mg/mL; (ii) chloroquine phosphate,15.0 mg/mL; (iii) dapsone, 2.0 mg/mL; (iv) phenytoin, 15.0 mg/mL; (v) pyridoxine hydrochloride, 50.0 mg/mL; (vi) sulfadiazine, 100.0 mg/mL; (vii) sulfasalazine, 100.0 mg/mL; (viii) tetracycline hydrochloride, 25.0 mg/mL; (ix) trimethoprim, 10.0 mg/mL; and (x) zonisamide, 10.0 mg/mL. All suspensions were stored both at controlled refrigeration (2-8 °C) and controlled room temperature (20-25 °C). Feasibility was assessed by measuring the percent recovery at varying time points throughout a 90-day period. API quantification was performed by high-performance liquid chromatography (HPLC-UV), via a stability-indicating method. Given the percentage of recovery of the APIs within the suspensions, the expiration date of the final products (API+vehicle) was at least 90 days for all suspensions with regard to both the controlled temperatures. This suggests that the vehicle is stable for compounding APIs from different pharmacological classes., (Copyright © 2015 Elsevier B.V. All rights reserved.)

A simple and rapid dispersive micro-solid phase extraction (DMSPE) combined with mode-mismatched thermal lens spectrometry as well as fiber optic linear array spectrophotometry was developed for the separation, extraction and determination of sulfadiazine. Graphene oxide was synthesized using the modified Hummers method and functionalized with iron oxide nanoparticles by means of a simple one step chemical coprecipitation method. The synthesized iron oxide functionalized graphene oxide was utilized as an efficient sorbent in DMSPE of sulfadiazine. The retained analyte was eluted by using 180µL of a 6:4 mixture of methanol/acetic acid solution and was spectrophotometrically determined based on the formation of an azo dye through coupling with thenoyltrifluoroacetone. Under the optimized conditions, with the application of spectrophotometry technique and with a sample volume of 100mL, the method exhibited a linear dynamic range of 3-80µg L(-1) with a detection limit of 0.82µg L(-1), an enrichment factor of 200 as well as the relative standard deviations of 2.6% and 4.3% (n=6) at 150µg L(-1) level of sulfadiazine for intra- and inter-day analyses, respectively. Whereas, through the application of the thermal lens spectrometry and a sample volume of 10mL, the method exhibited a linear dynamic range of 1-800µg L(-1) with a detection limit of 0.34µg L(-1) and the relative standard deviations of 3.1% and 5.4% (n=6) at 150µg L(-1) level of sulfadiazine for intra- and inter-day analyses, respectively. The method was successfully applied to the determination of sulfadiazine in milk, honey and water samples., (Copyright © 2015 Elsevier B.V. All rights reserved.)