Search

The temperature dependencies of hole density and hole mobility of p-type 4H-SiC obtained by Hall effect measurement were theoretically analyzed taking account of its anisotropic valence band structure. The experimental Hall factor, which was derived from the ratio of theoretical hole density to experimental Hall hole density, was reproduced by theoretical Hall factor computed using the valence band structure and relaxation times of scattering mechanisms. The product of the theoretical Hall factor and drift mobility computed by the same transport model agreed well with the experimental Hall mobility. Based on analyses of the results, it was revealed that the temperature dependence of Hall factor can be explained by considering the anisotropic valence band structure along with consideration of anisotropic relaxation times. The contribution of each scattering mechanism was also discussed, and empirical formulas for Hall and drift mobilities are presented. [ABSTRACT FROM AUTHOR]

The quasi-ballistic hole transport in germanium and silicon nanowires was theoretically investigated by solving the Boltzmann transport equation taking account of phonon scattering in an atomistic framework. Comparison of quasi-ballistic hole transport capabilities between germanium and silicon nanowires showed that the transmission coefficients for the two materials are similar. Then, the behavior of forward and backward current fluxes was analyzed focusing on the impact of energy relaxation process. The slower energy relaxation of holes in germanium nanowires leads to a longer distance where backscattering enables holes to return to the source. This cancels the benefit of the longer mean free path of holes in germanium nanowires, resulting in similar transmission coefficients in germanium and silicon nanowires. [ABSTRACT FROM AUTHOR]

The article studies 4H-SiC {0001} p-channel metal-oxide-semiconductor field-effect transistors (MOSFETs) with deposited Si[O.sub.2] followed by [N.sub.2]O annealing. Findings suggest that the deposited oxides annealed in [N.sub.2]O are efficient in improving the performance of 4H-SiC p-channel MOSFETs.

Objective: Precisely localizing the seizure onset zone remains a challenging task in drug-resistant epilepsy (DRE) patients especially given its critical role in successful surgery and effective management. This study aimed to investigate the kinetic parameters of regional 18F-fluorodeoxyglucose (FDG) uptake in DRE patients, aiming to identify the kinetic parameters best enabling the identification of the epileptogenic region.Methods: Consecutive DRE patients with clinically mandated interictal 18F-FDG PET/CT were recruited from October 2019 to September 2020 for pre-surgical evaluation. Immediately after injecting 18F-FDG of 112–179 MBq, dynamic data were acquired for 90 min. The motion correction and resampling to the Montreal atlas was performed in order to generate a transformation matrix. 116 volume of interests (VOIs) and regional time-activity curves (TACs) were generated by employing the automated anatomical labeling (AAL) template using PMOD software. Kinetic parameters of FDG unidirectional blood-brain clearance (K1), efflux (k2), phosphorylation (k3), and net metabolic flux (Ki) were derived using irreversible 2-tissue-compartment model with an image-derived input function (IDIF). The kinetic parameters values obtained from all regions were ranked and compared with the presumed epileptogenic zone (EZ).Results: Eleven DRE patients (5 males, 6 females, mean age 35.1 ± 10.2 years) were analyzed. We found that the region with the lowest values of Ki provided correct lateralization in 7/7 (100%) of patient with temporal lobe epilepsy (TLE) and the region with the lowest Ki and k3 parameters showed concordance with the EZ in 100% and 71.4% of patients, respectively.Conclusion: The present parametric approach to the evaluation of FDG-PET may be more sensitive than semi-quantitative approaches for the detection of pathophysiology in the EZ of patients with medically unresponsive TLE in addition to the routine clinical investigations.

We calculated the phonon-limited hole mobility in rectangular cross-sectional [001], [110], [111], and [112]-oriented germanium nanowires, and the hole transport characteristics were investigated. A tight-binding approximation was used for holes, and phonons were described by a valence force field model. Then, scattering probability of holes by phonons was calculated taking account of hole-phonon interaction atomistically, and the linearized Boltzmann's transport equation was solved to calculate the hole mobility at low longitudinal field. The dependence of the hole mobility on nanowire geometry was analyzed in terms of the valence band structure of germanium nanowires, and it was found that the dependence was qualitatively reproduced by considering an average effective mass and the density of states of holes. The calculation revealed that [110] germanium nanowires with large height along the [001] direction show high hole mobility. Germanium nanowires with this geometry are also expected to exhibit high electron mobility in our previous work, and thus they are promising for complementary metal-oxide-semiconductor (CMOS) applications. [ABSTRACT FROM AUTHOR]

The conduction band structure and electron effective mass of GaAs nanowires with various cross-sectional shapes and orientations were calculated by two methods, a tight-binding method and an effective mass equation taking the bulk full-band structure into account. The effective mass of nanowires increases as the cross-sectional size decreases, and this increase in effective mass depends on the orientations and substrate faces of nanowires. Among [001], [110], and [111]-oriented rectangular cross-sectional GaAs nanowires, [110]-oriented nanowires with wider width along the [001] direction showed the lightest effective mass. This dependence originates from the anisotropy of the C valley of bulk GaAs. The relationship between effective mass and bulk band structure is discussed. [ABSTRACT FROM AUTHOR]

Enhancement and control of carrier lifetimes in p-type 4H-SiC have been investigated. In this study, thermal oxidation and carbon ion implantation methods, both of which are effective for lifetime enhancement in n-type SiC, were attempted on 147-μm thick p-type 4H-SiC epilayers. Effects of surface passivation on carrier lifetimes were also investigated. The carrier lifetimes in p-type SiC could be enhanced from 0.9 μs (as-grown) to 2.6 μs by either thermal oxidation or carbon implantation and subsequent Ar annealing, although the improvement effect for the p-type epilayers was smaller than that for the n-type epilayers. After the lifetime enhancement, electron irradiation was performed to control the carrier lifetime. The distribution of carrier lifetimes in each irradiated region was rather uniform, along with successful lifetime control in the p-type epilayer in the range from 0.1 to 1.6 μs. [ABSTRACT FROM AUTHOR]

Lattice parameters of high-dose ion-implanted 4H-SiC were investigated with reciprocal space mapping (RSM). N, P, Al, or (C+Si) ions were implanted into lightly doped epilayers to form a (330-520) nm-deep box profile with concentrations of 1019-1020atoms/cm3. After activation annealing at 1800 °C, RSM measurements were conducted. The RSM images for (0008) reflection revealed that high-dose ion implantation causes c-lattice expansion in implanted layers, irrespective of ion species. In addition, crystallographic tilt was observed after high-dose ion implantation. The tilt direction is the same for all the samples investigated; the c-axis of the implanted layers is inclined toward the ascending direction of the off-cut. The c-lattice mismatch and the tilt angle increased as the implantation dose increases, indicating that the implantation damage is responsible for the lattice parameter change. From these results and transmission electron microscopy observation, the authors conclude that the c-lattice mismatch and the crystallographic tilt are mainly caused by secondary defects formed after the ion-implantation and activation-annealing process. [ABSTRACT FROM AUTHOR]

Impacts of reduction of deep levels and surface passivation on carrier lifetimes in p-type 4H-SiC epilayers are investigated. The authors reported that the carrier lifetime in n-type epilayers increased by reduction of deep levels through thermal oxidation and thermal annealing. However, the carrier lifetimes in p-type epilayers were not significantly enhanced. In this study, in order to investigate the influence of surface passivation on the carrier lifetimes, the epilayer surface was passivated by different oxidation techniques. While the improvement of the carrier lifetime in n-type epilayers was small, the carrier lifetime in p-type epilayers were remarkably improved by appropriate surface passivation. For instance, the carrier lifetime was improved from 1.4 μs to 2.6 μs by passivation with deposited SiO2 annealed in NO. From these results, it was revealed that surface recombination is a limiting factor of carrier lifetimes in p-type 4H-SiC epilayers. [ABSTRACT FROM AUTHOR]

Dependencies of temperature and injection level on carrier lifetimes in 50 μm thick p-type and n-type 4H-SiC epilayers have been investigated. The carrier lifetimes have been measured by differential microwave photoconductance decay measurements at various injection levels and temperatures. In both p-type and n-type epilayers, the carrier lifetimes gradually increased with increasing the injection level, which were naturally expected from the Shockley-Read-Hall (SRH) model, and after taking a maximum, the lifetimes dropped at the very high-injection level. In contrast, the carrier lifetimes exhibited continuous increase with elevating the temperature for both epilayers. In addition, the impact of thermal oxidation process on the carrier lifetimes has been also investigated. The thermal oxidation process, by which the Z1/2 and EH6/7 centers were remarkably reduced that had been observed in n-type 4H-SiC in our previous work, led to the improvement of the carrier lifetimes especially for n-type epilayers. The carrier lifetime reached 4.1 μs in p-type and 6.1 μs in n-type epilayers at 250 °C with an injection level of 1.8×1016 cm-3 through the thermal oxidation processing. [ABSTRACT FROM AUTHOR]

SiN passivation on AlGaN/GaN heterostructures was carried out using catalytic or plasma-enhanced chemical vapor deposition (Cat-CVD or PECVD), which has been found to increase two-dimensional electron gas (2DEG) density. The 2DEG density can be closely related to AlGaN surface properties via polarization effects. AlGaN potential barrier heights of AlGaN/GaN heterostructures with and without SiN passivation were systematically investigated using x-ray photoelectron spectroscopy (XPS) and capacitance-voltage (C-V) measurements. The results for the XPS and C-V measurements were consistent and demonstrated that a reduction in the AlGaN potential barrier height was actually induced by SiN passivation. Furthermore, Cat-CVD SiN passivation lowered the AlGaN potential barrier height more significantly than PECVD SiN passivation did, suggesting that the passivation method can influence the AlGaN potential barrier height. [ABSTRACT FROM AUTHOR]

A series of m-plane GaN layers with the Ga beam-equivalent pressure (BEP) as the only varied parameter was grown by rf-plasma assisted molecular beam epitaxy on m-plane 4H-SiC substrates using AlN buffer layers. The smoothest growth surfaces and most complete film coalescence were found for the highest Ga BEP corresponding to the Ga droplet accumulation regime. However, better structural quality as assessed by x-ray rocking curves was observed for growth at a lower Ga BEP value below the droplet limit. The variation of rocking curve widths for planes inclined with respect to the epilayer c axis followed a different trend with Ga BEP than those of reflections parallel to the c axis. The GaN layers were found to exhibit a large residual compressive strain along the a axis. [ABSTRACT FROM AUTHOR]

High-efficiency visible light emission in N-and-B-doped 6H-SiC epilayers was observed in photoluminescence measurements at room temperature. The orange-yellow light emission due to the recombination of donor-acceptor pairs (DAPs) has a broad spectrum with a peak wavelength of 576 nm and a full width at half maximum of 110 nm at 250 K. The high B concentration of more than 1018 cm-3 improves the emission efficiency of the DAP recombination at a high temperature. Compared with the photoluminescence spectrum of GaN at 10 K, a high quantum efficiency of 95% was estimated for the highly B-doped sample. From time-resolved photoluminescence measurements, a DAP recombination time of 5.0 ms was obtained, which is in good agreement with the calculated value by the rate equation with the assumption of a 95% internal quantum efficiency. This is quite promising as a light-emitting medium by optical pumping, as well as monolithic light sources combined with nitride-based light-emitting diodes grown on the DA-doped SiC epilayer. [ABSTRACT FROM AUTHOR]