Search

The measurement of polydisperse protein aggregates and particles in biotherapeutics remains a challenge, especially for particles with diameters of ≈ 1 µm and below (sub-micrometer). This paper describes an interlaboratory comparison with the goal of assessing the measurement variability for the characterization of a sub-micrometer polydisperse particle dispersion composed of five sub-populations of poly(methyl methacrylate) (PMMA) and silica beads. The study included 20 participating laboratories from industry, academia, and government, and a variety of state-of-the-art particle-counting instruments. The received datasets were organized by instrument class to enable comparison of intralaboratory and interlaboratory performance. The main findings included high variability between datasets from different laboratories, with coefficients of variation from 13 % to 189 %. Intralaboratory variability was, on average, 37 % of the interlaboratory variability for an instrument class and particle sub-population. Drop-offs at either end of the size range and poor agreement on maximum counts of particle sub-populations were noted. The mean distributions from an instrument class, however, showed the size-coverage range for that class. The study shows that a poly-disperse sample can be used to assess performance capabilities of an instrument set-up (including hardware, software, and user settings) and provides guidance for the development of polydisperse reference materials.

Antigenic peptide-loaded cationic liposomes have shown promise as cancer vaccines. Quantification of both peptides and lipids is critical for quality control of such vaccines for clinical translation. In this work we describe a reversed phase ultra-performance liquid chromatography (RP-UPLC) method that separates lipids (DOTAP, DOPC and their degradation products) and two physicochemically different peptides within 12 min. Samples were prepared by dilution in a 1:1 (v/v) mixture of methanol and water. Peptide quantifi-cation was done via UV detection and lipids were quantified by an evaporative light scattering detector (ELSD), both coupled to the RP-UPLC system, with high precision (RSD < 3.5%). We showed that the presence of lipids and peptides did not mutually influence their quantification. Limit of detection (LOD) and limit of quantification (LOQ), as determined in the ICH guidelines, were 6 and 20 ng for DOTAP, 12 ng and 40 ng for DOPC, 3.0 ng and 8.0 ng for peptide A and 2.4 ng and 7.2 ng for the more hydrophobic peptide B. Finally, lipid degradation of DOTAP and DOPC was monitored in peptide loaded DOTAP:DOPC liposomes upon storage at 4 degrees C and 40 degrees C.(c) 2022 The Authors. Published by Elsevier Inc. on behalf of American Pharmacists Association. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/)

The purpose of this study was to optimize the manufacturing of dissolving microneedles (dMNs) and to increase the antigen loading in dMNs to investigate the effect on their physicochemical properties. To achieve this, a novel single-array wells polydimethylsiloxane mold was designed, minimizing antigen wastage during fabrication and achieving homogeneous antigen distribution among the dMN arrays. Using this mold, hyaluronan (HA)-based dMNs were fabricated and tested for maximal ovalbumin (OVA) content. dMNs could be fabricated with an OVA:HA ratio as high as 1:1 (w/w), without compromising their properties such as shape and penetration into the ex vivo human skin, even after storage at high humidity and temperature. High antigen loading did not induce protein aggregation during dMN fabrication as demonstrated by complementary analytical methods. However, the dissolution rate in ex vivo human skin decreased with increasing antigen loading. About 2.7 µg OVA could be delivered in mice by using a single array with an OVA:HA ratio of 1:3 (w/w). Intradermal vaccination with dMNs induced an immune response similar as subcutaneous injection and faster than after hollow microneedle injection. In conclusion, results suggest that (i) the polydimethylsiloxane mold design has an impact on the manufacturing of dMNs, (ii) the increase in antigen loading in dMNs affects the microneedle dissolution and (iii) dMNs are a valid alternative for vaccine administration over conventional injection.

Sample preparation for extraction of nanoscale plastic debris (NPD, size < 1 μm) from environmental samples is a critical step to prepare NPD for further identification and quantification. Developing a NPD extraction method from soil matrices is particularly challenging due to the complexity of solid matrices. In the present study, we built upon the lessons learned from method development for extraction of microplastics and nanomaterials from environmental samples to develop a sample preparation method for extraction of NPD from soil matrices. The evaluation criteria for the extraction method are size distribution, particle number recovery, and particle mass recovery. Since there is no validated method available to trace and quantify the mass of NPD in complex matrices, we applied polystyrene particles doped with europium (Eu-PS NPs). Standard LUFA soil and field soil were spiked and mixed for 24 h with 1 mg of Eu-PS NPs and the particles were extracted from the matrices of the soils. The extraction method did not significantly influence the size distribution of the particles and the extraction agents did not degrade the Eu-PS NPs. Mass balance calculation suggested recoveries of 82 and 77% of the added Eu-PS NPs in LUFA soil and field soil, respectively. The number recoveries of the particles were 81 and 85% for LUFA soil and field soil, respectively. This method can be further optimized and used as the first building block to develop a generic sample preparation method for the extraction of NPD from soil samples. By combining this developed and verified extraction method with identification and quantification techniques, a fit-for-purpose workflow can be developed to quantify and subsequently understand the fate of NPD in soil.

Aim To evaluate feasibility of intradermal (i.d.) adalimumab administration using hollow microneedles, and to compare a single i.d. dose of adalimumab using a hollow microneedle with a single subcutaneous (s.c.) dose using a conventional needle. Methods In this single-centre double-blind, placebo-controlled, double-dummy clinical trial in 24 healthy adults we compared 40 mg adalimumab (0.4 mL) administered i.d. using a hollow microneedle with a s.c. dose using a conventional needle. Primary parameters were pain, acceptability, and local tolerability; secondary parameters safety, pharmacokinetics and immunogenicity. We explored usability of optical coherence tomography (OCT), clinical photography, thermal imaging, and laser speckle contrast imaging (LSCI) to evaluate skin reaction after i.d. injections. In vitro protein analysis was performed to assess compatibility of adalimumab with the hollow microneedle device. Results While feasible and safe, injection pain of i.d. adalimumab was higher compared to s.c. adalimumab (35.4 vs. 7.9 on a 101-point VAS scale). Initial absorption rate and bioavailability were higher after i.d. adalimumab (Tmax=95h(47-120); F=129%(6.46%)) compared to s.c. adalimumab (Tmax=120h(96-221)). In 50% and 83% of the subjects anti-adalimumab antibodies were detected after i.d. and s.c. adalimumab, respectively. We observed statistically significantly more erythema and skin perfusion after i.d. adalimumab, compared to s.c. adalimumab and placebo injections (p

A key enabling step in leveraging the properties of nanoparticles (NPs) is to explore new, simple, controllable, and scalable nanotechnologies for their syntheses. Among “wet” methods, cathodic corrosion has been used to synthesize catalytic aggregates with some control over their size and preferential faceting. Here, we report on a modification of the cathodic corrosion method for producing a range of nonaggregated nanocrystals (Pt, Pd, Au, Ag, Cu, Rh, Ir, and Ni) and nanoalloys (Pt50Au50, Pd50Au50, and AgxAu100–x) with potential for scaling up the production rate. The method employs poly(vinylpyrrolidone) (PVP) as a stabilizer in an electrolyte solution containing nonreducible cations (Na+, Ca2+), and cathodic corrosion of the corresponding wires takes place in the electrolyte under ultrasonication. The ultrasonication not only promotes particle–PVP interactions (enhancing NP dispersion and diluting locally high NP concentration) but also increases the production rate by a factor of ca. 5. Further increase in the production rate can be achieved through parallelization of electrodes to construct comb electrodes. With respect to applications, carbon-supported Pt NPs prepared by the new method exhibit catalytic activity and durability for methanol oxidation comparable or better than the commercial benchmark catalyst. A variety of AgxAu100–x nanoalloys are characterized by ultraviolet–visible absorption spectroscopy and high-resolution transmission electron microscopy. The protocol for NP synthesis by cathodic corrosion should be a step toward its further use in academic research as well as in its practical upscaling.

Suitable methods and fit-for-purpose techniques are required to allow characterization of carbon-based nanomaterials (CB-NMs) in complex matrices. In this study, two methods were developed; a method for extraction and characterization of CB-NMs in biological media and a method for fractionation of natural organic matter (NOM) coated CB-NMs in environmental matrices. The former method was developed by extracting carbon nanotubes (CNTs: sized 0.75 × 3000 nm) and nanoplastics (sized 60, 200 and 600 nm) from eggshells and characterizing the extracted CB-NMs in terms of particle size distribution using asymmetrical flow field-flow fractionation (AF4) coupled with multi-angle light scattering (MALS). The latter method was developed using AF4-MALS to fraction NOM-coated CNT (sized 0.75 × 3000 nm) and nanoplastics (sized 60, 200 and 300 nm) in a simulated natural surface water and provide information about the size distribution of the CB-NM-NOM complexes. The developed AF4-MALS method successfully fractioned the CB-NM-NOM complexes based on hydrodynamic size and provided the size distribution of the complexes. The NOM corona did not shift significantly the median size of the CB-NMs. It influenced however the size distribution of the nanoplastics and CNTs. The sample preparation method failed to extract the CNTs (recovery 60%). The AF4-MALS fractogram showed that the extraction method did not significantly influence the size distribution of the nanoplastics of 60 and 200 nm size, whereas the peak of 600 nm nanoplastics shifted towards a smaller hydrodynamic size. In conclusion, the developed sample preparation method followed by the developed AF4-MALS method can be applied for extraction, separation and characterization of CB-NMs in biological and environmental matrices. Thus, the methods have a high potential to be methods of choice to investigate CB-NMs in future studies.

In this study, we developed a microfluidics method, using a so-called H-cell microfluidics device, for the determination of protein diffusion coefficients at different concentrations, pHs, ionic strengths, and solvent viscosities. Protein transfer takes place in the H-cell channels between two laminarly flowing streams with each containing a different initial protein concentration. The protein diffusion coefficients are calculated based on the measured protein mass transfer, the channel dimensions, and the contact time between the two streams. The diffusion rates of lysozyme, cytochrome c, myoglobin, ovalbumin, bovine serum albumin, and etanercept were investigated. The accuracy of the presented methodology was demonstrated by comparing the measured diffusion coefficients with literature values measured under similar solvent conditions using other techniques. At low pH and ionic strength, the measured lysozyme diffusion coefficient increased with the protein concentration gradient, suggesting stronger and more frequent intermolecular interactions. At comparable concentration gradients, the measured lysozyme diffusion coefficient decreased drastically as a function of increasing ionic strength (from zero onwards) and increasing medium viscosity. Additionally, a particle tracing numerical simulation was performed to achieve a better understanding of the macromolecular displacement in the H-cell microchannels. It was found that particle transfer between the two channels tends to speed up at low ionic strength and high concentration gradient. This confirms the corresponding experimental observation of protein diffusion measured via the H-cell microfluidics.

PURPOSE\nThe aim of this study was to investigate the depth-dependent intradermal immunogenicity of inactivated polio vaccine (IPV) delivered by depth-controlled microinjections via hollow microneedles (HMN) and to investigate antibody response enhancing effects of IPV immunization adjuvanted with CpG oligodeoxynucleotide 1826 (CpG) or cholera toxin (CT).\nMETHODS\nA novel applicator for HMN was designed to permit depth- and volume-controlled microinjections. The applicator was used to immunize rats intradermally with monovalent IPV serotype 1 (IPV1) at injection depths ranging from 50 to 550 μm, or at 400 μm for CpG and CT adjuvanted immunization, which were compared to intramuscular immunization.\nRESULTS\nThe applicator allowed accurate microinjections into rat skin at predetermined injection depths (50-900 μm), -volumes (1-100 μL) and -rates (up to 60 μL/min) with minimal volume loss (±1-2%). HMN-mediated intradermal immunization resulted in similar IgG and virus-neutralizing antibody titers as conventional intramuscular immunization. No differences in IgG titers were observed as function of injection depth, however IgG titers were significantly increased in the CpG and CT adjuvanted groups (7-fold).\nCONCLUSION\nIntradermal immunogenicity of IPV1 was not affected by injection depth. CpG and CT were potent adjuvants for both intradermal and intramuscular immunization, allowing effective vaccination upon a minimally-invasive single intradermal microinjection by HMN.

Biomaterials used as matrix for dissolving micro needles (dMNs) may affect the manufacturing process as well as the potency of the active pharmaceutical ingredient, e.g. the immunogenicity of incorporated vaccine antigens. The aim of this study was to investigate the effect of the molecular weight of hyaluronan, a polymer widely used in the fabrication of dMNs, ranging in molecular weight from 4.8 kDa to 1.8 MDa, on the dissolution of microneedles in the skin in time as well as the antibody response in mice and T-cell activation in vitro. Hyaluronan molecular weight (HA-MWs) did not affect antibody responses (when lower than 150 kDa) nor CD4 + T-cell responses against model antigen ovalbumin. However, the HA-MWs had an effect on the fabrication of dMNs. The 1.8 MDa HA was not suitable for the fabrication of dMNs. Similarly, the 4.8 kDa HA generated dMN arrays less robust compared to the other HA-MWs requiring optimization of the drying conditions. Finally, higher HAMWs led to longer application time of dMN arrays for a complete dissolution of microneedles into the skin. Specifically, we identified 20 kDa HA as the optimal HA-MW for the fabrication of dMNs as with this MW the dMNs are robust and dissolve fast in the skin without affecting immunogenicity.

In this study the effect of repeated-fractional intradermal administration of diphtheria toxoid (DT) compared to a single administration in the presence or absence of adjuvants formulated in dissolving microneedles (dMNs) was investigated. Based on an adjuvant screening with a hollow microneedle (hMN) system, poly(I:C) and gibbsite, a nanoparticulate aluminum salt, were selected for further studies: they were co-encapsulated with DT in dMNs with either a full or fractional DT-adjuvant dose. Sharp dMNs were prepared regardless the composition and were capable to penetrate the skin, dissolve within 20 min and deposit the intended antigen-adjuvant dose, which remained in the skin for at least 5 h. Dermal immunization with hMN in repeated-fractional dosing (RFrD) resulted in a higher immune response than a single-full dose (SFD) administration. Vaccination by dMNs led overall to higher responses than hMN but did not show an enhanced response after RFrD compared to a SFD administration. Co-encapsulation of the adjuvant in dMNs did not increase the immune response further. Immunization by dMNs without adjuvant gave a comparable response to subcutaneously injected DT-AlPO4 in a 15 times higher dose of DT, as well as subcutaneous injected DT-poly(I:C) in a similar DT dose. Summarizing, adjuvant-free dMNs showed to be a promising delivery tool for vaccination performed in SFD administration.

Purpose Personalized peptide-based cancer vaccines will be composed of multiple patient specific synthetic long peptides (SLPs) which may have various physicochemical properties. To formulate such SLPs, a flexible vaccine delivery system is required. We studied whether cationic liposomes are suitable for this purpose. Methods Fifteen SIINFEKL T cell epitope-containing SLPs, widely differing in hydrophobicity and isoelectric point, were separately loaded in cationic liposomes via the dehydration-rehydration method. Particle size and polydispersity index (PDI) were measured via dynamic light scattering (DLS), and zeta potential with laser Doppler electrophoresis. Peptide loading was fluorescently determined and the immunogenicity of the formulated peptides was assessed in co-cultures of dendritic cells (DCs) and CD8+ T-cells in vitro. Results All SLPs were loaded in cationic liposomes by using three different loading method variants, depending on the SLP characteristics. The fifteen liposomal formulations had a comparable size (< 200 nm), PDI (< 0.3) and zeta potential (22–30 mV). Cationic liposomes efficiently delivered the SLPs to DCs that subsequently activated SIINFEKL-specific CD8+ T-cells, indicating improved immunological activity of the SLPs. Conclusion Cationic liposomes can accommodate a wide range of different SLPs and are therefore a potential delivery platform for personalized cancer vaccines. Electronic supplementary material The online version of this article (10.1007/s11095-018-2490-6) contains supplementary material, which is available to authorized users.

To examine the immunogenicity of diphtheria toxoid (DT) loaded mesoporous silica nanoparticles (MSNs) after coated and hollow microneedle-mediated intradermal immunization in mice. DT was loaded into MSNs and the nanoparticle surface was coated with a lipid bilayer (LB-MSN-DT). To prepare coated microneedles, alternating layers of negatively charged LB-MSN-DT and positively charged N-trimethyl chitosan (TMC) were coated onto pH-sensitive microneedle arrays via a layer-by-layer approach. Microneedle arrays coated with 5 or 3 layers of LB-MSN-DT were used to immunize mice and the elicited antibody responses were compared with those induced by hollow microneedle-injected liquid formulation of LB-MSN-DT. Liquid DT formulation with and without TMC (DT/TMC) injected by a hollow microneedle were used as controls. LB-MSN-DT had an average size of about 670 nm and a zeta potential of -35 mV. The encapsulation efficiency of DT in the nanoparticles was 77%. The amount of nano-encapsulated DT coated onto the microneedle array increased linearly with increasing number of the coating layers. Nano-encapsulated DT induced stronger immune responses than DT solution when delivered intradermally via hollow microneedles, but not when delivered via coated microneedles. Both the nano-encapsulation of DT and the type of microneedles affect the immunogenicity of the antigen. PURPOSE METHODS RESULTS CONCLUSION

ObjectivesTherapeutic antibodies can provoke an antidrug antibody (ADA) response, which can form soluble immune complexes with the drug in potentially high amounts. Nevertheless, ADA-associated adverse events are usually rare, although with notable exceptions including infliximab. The immune activating effects and the eventual fate of these ‘anti-idiotype’ complexes are poorly studied, hampering assessment of ADA-associated risk of adverse events. We investigated the in vitro formation and biological activities of ADA-drug anti-idiotype immune complexes using patient-derived monoclonal anti-infliximab antibodies.MethodsSize distribution and conformation of ADA-drug complexes were characterised by size-exclusion chromatography and electron microscopy. Internalisation of and immune activation by complexes of defined size was visualised with flow imaging, whole blood cell assay and C4b/c ELISA.ResultsSize and conformation of immune complexes depended on the concentrations and ratio of drug and ADA; large complexes (>6 IgGs) formed only with high ADA titres. Macrophages efficiently internalised tetrameric and bigger complexes in vitro, but not dimers. Corroborating these results, ex vivo analysis of patient sera demonstrated only dimeric complexes in circulation.No activation of immune cells by anti-idiotype complexes was observed, and only very large complexes activated complement. Unlike Fc-linked hexamers, anti-idiotype hexamers did not activate complement, demonstrating that besides size, conformation governs immune complex potential for triggering effector functions.ConclusionsAnti-idiotype ADA-drug complexes generally have restricted immune activation capacity. Large, irregularly shaped complexes only form at high concentrations of both drug and ADA, as may be achieved during intravenous infusion of infliximab, explaining the rarity of serious ADA-associated adverse events.

Skin is an attractive but also very challenging immunisation site for particulate subunit vaccines. The aim of this study was to develop hyaluronan (HA)-based dissolving microneedles (MNs) loaded with PLGA nanoparticles (NPs) co-encapsulating ovalbumin (OVA) and poly(I:C) for intradermal immunisation. The NP:HA ratio used for the preparation of dissolving MNs appeared to be critical for the quality of MNs and their dissolution in ex vivo human skin. Asymmetrical flow field-flow fractionation and dynamic light scattering were used to analyse the NPs released from the MNs in vitro. Successful release of the NPs depended on the drying conditions during MN preparation. The delivered antigen dose from dissolving MNs in mice was determined to be 1 µg OVA, in NPs or as free antigen, by using near-infrared fluorescence imaging. Finally, the immunogenicity of the NPs after administration of dissolving MNs (NP:HA weight ratio 1:4) was compared with that of hollow MN-delivered NPs in mice. Immunization with free antigen in dissolving MNs resulted in equally strong immune responses compared to delivery by hollow MNs. However, humoral and cellular immune responses evoked by NP-loaded dissolving MNs were inferior to those elicited by NPs delivered through a hollow MN. In conclusion, we identified several critical formulation parameters for the further development of NP-loaded dissolving MNs.

In this study, we aimed to investigate the immunogenicity of cationic liposomes loaded with diphtheria toxoid (DT) and poly(I:C) after hollow microneedle-mediated intradermal vaccination in mice. The following liposomal formulations were studied: DT loaded liposomes, a mixture of free DT and poly(I:C)-loaded liposomes, a mixture of DT-loaded liposomes and free poly(I:C), and liposomal formulations with DT and poly(I:C) either individually or co-encapsulated in the liposomes. Reference groups were DT solution adjuvanted with or without poly(I:C) (DT/poly(I:C)). The liposomal formulations were characterized in terms of particle size, zeta potential, loading and release of DT and poly(I:C). After intradermal injection of BALB/c mice with the formulations through a hollow microneedle, the immunogenicity was assessed by DT-specific ELISAs. All formulations induced similar total IgG and IgG1 titers. However, all the liposomal groups containing both DT and poly(I:C) showed enhanced IgG2a titers compared to DT/poly(I:C) solution, indicating that the immune response was skewed towards a Th1 direction. This enhancement was similar for all liposomal groups that contain both DT and poly(I:C) in the formulations. Our results reveal that a mixture of DT encapsulated liposomes and poly(I:C) encapsulated liposomes have a similar effect on the antibody responses as DT and poly(I:C) co-encapsulated liposomes. These findings may have implications for future design of liposomal vaccine delivery systems.

Dermal immunization using antigen-coated microneedle arrays is a promising vaccination strategy. However, reduction of microneedle sharpness and the available surface area for antigen coating is a limiting factor. To overcome these obstacles, a layer-by-layer coating approach can be applied onto pH-sensitive microneedles. Following this approach, pH-sensitive microneedle arrays (positively charged at coating pH 5.8 and nearly uncharged at pH 7.4) were alternatingly coated with negatively charged diphtheria toxoid (DT) and N-trimethyl chitosan (TMC), a cationic adjuvant. First, the optimal DT dose for intradermal immunization was determined in a dose-response study, which revealed that low-dose intradermal immunization was more efficient than subcutaneous immunization and that the EC50 dose of DT upon intradermal immunization is 3-fold lower, as compared to subcutaneous immunization. In a subsequent immunization study, microneedle arrays coated with an increasing number (2, 5, and 10) of DT/TMC bilayers resulted in step-wise increasing DT-specific immune responses. Dermal immunization with microneedle arrays coated with 10 bilayers of DT/TMC (corresponding with ± 0.6 μg DT delivered intradermally) resulted in similar DT-specific immune responses as subcutaneous immunization with 5 μg of DT adjuvanted with aluminum phosphate (8-fold dose reduction). Summarizing, the layer-by-layer coating approach onto pH-sensitive microneedles is a versatile method to precisely control the amount of coated and dermally-delivered antigen that is highly suitable for dermal immunization.

Microneedle-based vaccination has several advantages over vaccination by using conventional hypodermic needles. Microneedles are used to deliver a drug into the skin in a minimally-invasive and potentially pain free manner. Besides, the skin is a potent immune organ that is highly suitable for vaccination. However, there are several factors that influence the penetration ability of the skin by microneedles and the immune responses upon microneedle-based immunization. In this study we assessed several different microneedle arrays for their ability to penetrate ex vivo human skin by using trypan blue and (fluorescently or radioactively labeled) ovalbumin. Next, these different microneedles and several factors, including the dose of ovalbumin, the effect of using an impact-insertion applicator, skin location of microneedle application, and the area of microneedle application, were tested in vivo in mice. The penetration ability and the dose of ovalbumin that is delivered into the skin were shown to be dependent on the use of an applicator and on the microneedle geometry and size of the array. Besides microneedle penetration, the above described factors influenced the immune responses upon microneedle-based vaccination in vivo. It was shown that the ovalbumin-specific antibody responses upon microneedle-based vaccination could be increased up to 12-fold when an impact-insertion applicator was used, up to 8-fold when microneedles were applied over a larger surface area, and up to 36-fold dependent on the location of microneedle application. Therefore, these influencing factors should be considered to optimize microneedle-based dermal immunization technologies.

The purpose of this study was to investigate the effect of various repeated fractional intradermal dosing schedules of inactivated polio vaccine serotype 1 (IPV1) on IPV1-specific IgG responses in rats. By utilizing an applicator that allowed for precisely controlled intradermal microinjections by using a single hollow microneedle, rats were immunized intradermally with 5 D-antigen units (DU) of IPV1 at 150μm skin depth. This dose was administered as a bolus, or in a repeated fractional dosing schedule: 4 doses of 1.25 DU (1/4th of total dose) were administered on four consecutive days or every other day; 8 doses of 0.625 DU (1/8th of total dose) were administered on eight consecutive days; or 4 exponentially increasing doses (0.04, 0.16, 0.8 and 4 DU), either with or without an exponentially increasing CpG oligodeoxynucleotide 1826 (CpG) dose, were administered on four consecutive days. All of these fractional dosing schedules resulted in up to ca. 10-fold higher IPV1-specific IgG responses than intradermal and intramuscular bolus dosing. IPV1 combined with adjuvant CpG in exponential dosing did not significantly increase the IPV1-specific IgG responses further, which demonstrated that maximal responses were achieved by fractional dosing. In conclusion, repeated fractional intradermal IPV1 dosing leads to superior IPV1-specific IgG responses without the use of adjuvants. These results indicate that a controlled release delivery system for intradermal IPV1 delivery can potentiate IPV1-specific IgG responses.

We investigated the influence of pH and sodium chloride concentration on aggregation kinetics of a monoclonal antibody. Aggregation was induced by sodium chloride addition at low pH. Protein conformation before and after salt addition was determined as well as the reversibility of aggregation. Aggregation was monitored at pH values between 2 and 7 with NaCl up to 1.5M by turbidity measurement and size-exclusion chromatography. Particle size distribution was assessed by using size-exclusion chromatography as well as nanoparticle tracking analysis and flow imaging microscopy. Structural changes were monitored by circular dichroism, Fourier transform infrared and fluorescence spectroscopy. Thermal stability was measured by differential scanning fluorimetry. Aggregation propensity was maximal at low pH and high ionic strength. While thermal stability decreased with pH, the secondary structure remained unchanged down to pH 3.5 and up to 1.5M NaCl. Precipitated protein could be largely reverted to monomers by dilution into salt-free buffer. The re-solubilized antibody was indistinguishable in structure, solubility and monodispersity from the unstressed protein. Also, binding to Protein A was steady. Aggregation could be reduced in the presence of trehalose. The results suggest a reversible aggregation mechanism characterized by a limited change in tertiary structure at low pH and a subsequent loss of colloidal stability resulting from electrostatic repulsion once salt is added to the sample. The experimental setup is robust and allows high-throughput quantification of the effect of additives on aggregation kinetics.

Cationic liposomes are known as potent adjuvants for subunit vaccines. The purpose of this work was to study whether the content and the physicochemical properties of the positively charged compound affect the adjuvanticity of cationic liposomes. Cationic liposomes containing a cationic compound (DDA, DPTAP, DC-Chol, or eDPPC) and a neutral phospholipid (DPPC) were prepared by the film hydration-extrusion method and loaded with influenza hemagglutinin (HA) by adsorption. The liposomes were characterized (hydrodynamic diameter, zeta potential, membrane fluidity, HA loading) and their adjuvanticity was tested in mice. The formulations were administered twice subcutaneously and mouse sera were analyzed for HA-specific antibodies by ELISA and for HA-neutralizing antibodies by hemagglutination inhibition (HI) assay. First, the influence of cationic lipid concentration in the DC-Chol/DPPC liposomes (10 vs. 50 mol%) was investigated. The DC-Chol/DPPC (50:50) liposomes showed a higher zeta potential and HA loading, resulting in stronger immunogenicity of the HA/DC-Chol/DPPC (50:50) liposomes compared to the corresponding (10:90) liposomes. Next, we used liposomes composed of 50 mol% cationic lipids to investigate the influence of the nature of the cationic compound on the adjuvant effect. Liposomes made of the four cationic compounds showed similar hydrodynamic diameters (between 100 and 170 nm), zeta potentials (between +40 and +50 mV), HA loading (between 55% and 76%) and melting temperatures (between 40 and 55 °C), except for the DC-Chol liposomes, which did not show any phase transition. HA adjuvanted with the DC-Chol/DPPC (50:50) liposomes elicited significantly higher total IgG1 and IgG2a titers compared to the other liposomal HA formulations and non-adjuvanted HA. A similar trend was observed for the HI titers. These results show that the adjuvanticity of cationic liposomes depends on both the content and the physicochemical properties of the charged compound.

Purpose In this study, modulation of the immune response against diphtheria toxoid (DT) by various adjuvants in transcutaneous immunization (TCI) with microneedle array pretreatment was investigated. Methods TCI was performed on BALB/c mice with or without microneedle array pretreatment using DT as a model antigen co-administrated with lipopolysaccharide (LPS), Quil A, CpG oligo deoxynucleotide (CpG) or cholera toxin (CT) as adjuvant. The immunogenicity was evaluated by measuring serum IgG subtype titers and neutralizing antibody titers. Results TCI with microneedle array pretreatment resulted in a 1,000-fold increase of DT-specific serum IgG levels as compared to TCI. The immune response was further improved by co-administration of adjuvants, showing a progressive increase in serum IgG titers when adjuvanted with LPS, Quil A, CpG and CT. IgG titers of the CT-adjuvanted group reached levels comparable to those obtained after DT-alum subcutaneous injection. The IgG1/IgG2a ratio of DT-specific antibodies decreased in the following sequence: plain DT, Quil A, CT and CpG, suggesting that the immune response was skewed towards the Th1 direction. Conclusions The potency and the quality of the immune response against DT administered by microneedle array mediated TCI can be modulated by co-administration of adjuvants.

Human skin equivalents (HSEs) show great similarities to human native skin. However, one of the key processes impaired under in vitro conditions is desquamation. Desquamation involves the degradation of the corneodesmosomes, in which various enzymes participate. Activation of these enzymes is affected by several microenvironmental factors such as pH and water level. The water level is assumed to depend on the presence of natural moisturizing factors (NMF). In this study, the levels of water and one of the prominent NMF components--pyrrolidone carboxylic acid (PCA)--were examined. In HSE generated under normal culture conditions (93% relative humidity (RH)), the water level and PCA content appeared to be much lower than in the native counterpart. To increase the water and PCA levels in HSE, a culture method was established in which HSE was reconstructed under reduced RH. Although at 40% RH the PCA levels in reconstructed and native tissue are similar, the hydration levels in reconstructed tissue remain still lower. Only topical application of water induced marked swelling of corneocytes. This clearly shows that the stratum corneum water level in HSE is regulated by other, still unknown, factors, in addition to NMF.

In this study, the potential of N-trimethyl chitosan (TMC) nanoparticles as a carrier system for the nasal delivery of a monovalent influenza subunit vaccine was investigated. The antigen-loaded nanoparticles were prepared by mixing a solution containing TMC and monovalent influenza A subunit H3N2 with a tripolyphosphate (TPP) solution, at ambient temperature and pH 7.4 while stirring. The nanoparticles had an average size of about 800 nm with a narrow size distribution and a positive surface charge. The nanoparticles showed a loading efficiency of 78% and a loading capacity of 13% (w/w). It was shown that more than 75% of the protein remained associated with the TMC nanoparticles upon incubation of the particles in PBS for 3 h. The molecular weight and antigenicity of the entrapped hemagglutinin was maintained as shown by polyacrylamide gel electrophoresis and Western blotting, respectively. Single i.n. or i.m. immunization with antigen-loaded TMC nanoparticles resulted in strong hemagglutination inhibition and total IgG responses. These responses were significantly higher than those achieved after i.m. administration of the subunit antigen, whereas the IgG1/IgG2a profile did not change substantially. The i.n. administered antigen-TMC nanoparticles induced higher immune responses compared to the other i.n. antigen formulations, and these responses were enhanced by i.n. booster vaccinations. Moreover, among the tested formulations only i.n. administered antigen-containing TMC nanoparticles induced significant IgA levels in nasal washes of all mice. In conclusion, these findings demonstrate that TMC nanoparticles are a potent new delivery system for i.n. administered influenza antigens. (c) 2006 Elsevier Ltd. All rights reserved.

Dissolving microneedles are an attractive approach for non-invasive delivery of drugs via the skin, particularly when the doses are in the microgram or low-milligram range. The aim of the study was to develop hyaluronan-based, monoclonal IgG-loaded microneedles for intradermal delivery enabling efficient penetration and rapid dissolution in the skin while preserving protein stability. Microscopic analysis showed successful preparation of sharp microneedles with the tip length of ~ 280 μm and with up to 10% (w/w) of IgG content. The water content of the microneedles was ~ 12% and was not affected by the protein content. The protein distribution was uniform within microneedle tips and individual arrays but some array-to-array variation of IgG level within a single preparation batch was detected. After dissolution of microneedle arrays in PBS, > 80% of protein was recovered and no conformational changes were detected by fluorescence spectroscopy. At submicron level, only weak and reversible interaction between HA and IgG was found by asymmetric flow field flow fractionation analysis after the dissolution of prepared microneedles. Although, the formation of insoluble micron-size particles was detected by flow imaging microscopy the IgG amount incorporated into these particles was negligible (

Determine the effect of minute quantities of sub-visible aggregates on the in vitro immunogenicity of clinically relevant protein therapeutics.Monoclonal chimeric (rituximab) and humanized (trastuzumab) antibodies were subjected to fine-tuned stress conditions to achieve low levels (3% of total protein) of sub-visible aggregates. The effect of stimulating human dendritic cells (DC) and CD4(+) T cells with the aggregates was measured in vitro using cytokine secretion, proliferation and confocal microscopy.Due to its intrinsic high clinical immunogenicity, aggregation of rituximab had minimal effects on DC activation and T cell responses compared to monomeric rituximab. However, in the case of trastuzumab (low clinical immunogenicity) small quantities of aggregates led to potent CD4(+) T cell proliferation as a result of strong cytokine and co-stimulatory signals derived from DC. Consistent with this, confocal studies showed that stir-stressed rituximab was rapidly internalised and associated with late endosomes of DC.These data link minute amounts of aggregates with activation of the innate immune response, involving DC, resulting in T cell activation. Thus, when protein therapeutics with little or no clinical immunogenicity, such as trastuzumab, contain minute amounts of sub-visible aggregates, they are associated with significantly increased potential risk of clinical immunogenicity.

The design of particulate vaccine delivery systems, particularly for mucosal surfaces, has been a focus of interest in recent years. In this context, we have previously described the development and the characterization of a new nanosized delivery system, consisting of a model antigen adsorbed to chitosan particles and coated with sodium alginate. In the present work the ovalbumin release profiles from these coated nanoparticles in different pH buffers were investigated and compared to those of the uncoated particles. Cytotoxicity of the polymers and nanoparticles was assessed using the MTT assay. Finally, particle uptake studies in rat Peyer's patches were performed. It was demonstrated that the coating of the nanoparticles with sodium alginate not only avoided a burst release observed with uncoated particles but also increased the stability of the particles at pH 6.8 and 7.4 at 37 °C. At neutral pH, the release was lower than 5% after 3.5 h incubation in a low ionic strength buffer. For both, chitosan and alginate polymers, and for the nanoparticles, comparable cell viability data close to 100%, were obtained. Additionally, based on confocal laser scanning microscopy observations, it was shown that alginate coated nanoparticles were able to be taken up by rat Peyer's patches, rendering them suitable carriers for intestinal mucosal vaccination. http://www.sciencedirect.com/science/article/B6T3D-4K6CHRP-1/1/a257a285900ecde6d4747e1df67e1a82

Pulmonary immunization against inhaled pathogens such as Mycobacterium tuberculosis would induce local and systemic immune responses and protect from entry and dissemination of the pathogen. The aim of this study was to evaluate cationic submicron emulsion as a potential carrier for DNA vaccines to the lung. DNA loaded emulsions were 128-152 nm in size and retained positive zeta potential above +40 mV during 3 months of storage. Loading efficiency was above 99%, DNA was protected from DNase I degradation up to 60 min and was stable in presence of 75% fetal calf serum (FCS). The plasmid DNA was detected in the endo-lysosomal compartment of the human bronchial cell line, Calu-3, 6 h after application. No cytotoxic effect on these cells was observed. Human dendritic cells were matured in presence of DNA loaded emulsion, although to a lesser extent than DNA solution indicating slower release and lower exposure to unmethylated CpG sequences. These results indicate that cationic submicron emulsions are potential DNA vaccine carriers to the lung since they are able to transfect pulmonary epithelial cells, which possibly induce cross priming of antigen presenting cells and directly activate dendritic cells, resulting in stimulation of antigen specific T-cells.

Purpose. To investigate the possibility of direct transport of melatonin from the nasal cavity into the cerebrospinal fluid (CSF) after nasal administration in rats and to compare the animal results with a human study. Methods. Rats (n = 8) were given melatonin both intranasally in one nostril (40 μg/rat) and intravenously by bolus injection (40 μg/rat) into the jugular vein using a Vascular Access Port. Just before and after drug administration, blood and CSF samples were taken and analyzed by HPLC. Results. Melatonin is quickly absorbed in plasma (Tmax = 2.5 min) and shows a delayed uptake into CSF (Tmax = 15 min) after nasal administration. The melatonin concentration-time profiles in plasma and CSF are comparable to those after intravenous delivery. The AUCCSF/AUCplasma ratio after nasal delivery (32.7 ± 6.3%) does not differ from the one after intravenous injection (46.0 ± 10.4%), which indicates that melatonin enters the CSF via the blood circulation across the blood-brain barrier. This demonstrates that there is no additional transport via the nose-CSF pathway. These results resemble the outcome of a human study. Conclusions. The current results in rats show that there is no additional uptake of melatonin in the CSF after nasal delivery compared to intravenous administration. This is in accordance with the results found in humans, indicating that animal experiments could be predictive for the human situation when studying nose-CSF transport.

Drug transport from the nasal cavity to the brain has gained much interest in the last decade. In the present study, a model was developed to determine the uptake of drugs into the cerebrospinal fluid (CSF) after nasal delivery in rats. CSF samples were taken using a cisternal puncture method. In this method, a needle is advanced through the skin and muscles overlying the atlanto-occipital membrane into the cisterna magna, while the rat is fixed in a stereotaxic frame. This method appears to be superior over cannulation of the atlanto-occipital membrane for CSF sampling. The major advantages of the puncture method is the ability of serial and simultaneous CSF and blood sampling for over 2 h in the same rat. To obtain maximal drug absorption from the nasal cavity and uptake into CSF, different positions of the rat's head (upright-90 degrees, supine-90 degrees, supine-45 degrees and supine-70 degrees angles) were tested in nasal delivery studies using hydrocortisone (HC) as a model drug. Putting the rat in the supine-90 degrees angle position increased the absorption of HC into plasma and CSF 2-fold compared to the upright-90 degrees angle position. The supine-70 degrees angle position did not change the HC plasma and CSF levels compared to the supine-90 degrees angle position. However, the supine-70 degrees angle position showed the fastest CSF sampling rate, enabling more accurate CSF sampling and therefore preferred for further studies. In conclusion, the cisternal puncture method using the supine-70 degrees and 90 degrees angle position is a suitable method to study drug transport from the nasal cavity into the CSF, with the ability of multiple CSF sampling.

The aim of this work was to study the applicability of antigen-coated pH-sensitive microneedle arrays for effective vaccination strategies. Therefore, a model antigen (ovalbumin) was coated onto pH-sensitive (pyridine-modified) microneedle arrays to test pH-triggered antigen release by applying the coated arrays onto ex vivo human skin, and by conducting a dermal immunization study in mice. The release of antigen into ex vivo human skin from the coated microneedles was determined by using radioactively labeled ovalbumin. To investigate the induction of antigen-specific IgG, and CD4(+) and CD8(+) T-cell responses, BALB/c mice were immunized with antigen-coated pH-sensitive microneedles by the 'coat and poke' approach. These responses were compared to responses induced by the 'poke and patch' approach, and subcutaneous and intradermal vaccination with classic hypodermic needles. The pH-sensitive microneedle arrays were efficiently coated with ovalbumin (95% coating efficiency) and upon application of six microneedle arrays 4.27 of 7 μg ovalbumin was delivered into the skin, showing a release efficiency of 70%. In contrast, the 'poke and patch' approach led to a delivery of only 6.91 of 100 μg ovalbumin (7% delivery efficiency). Immunization by means of ovalbumin-coated microneedles resulted in robust CD4(+) and CD8(+) T-cell responses comparable to those obtained after subcutaneous or intradermal immunization with conventional needles. Moreover, it effectively induced IgG responses; however, it required prime-boost immunizations before antibodies were produced. In conclusion, antigen delivery into ex vivo human skin by antigen-coated pH-sensitive microneedle arrays is more efficient than the 'poke-and-patch' approach and in vivo vaccination studies show the applicability of pH-sensitive microneedles for the induction of both T cell and B cell responses.

N-trimethyl chitosan (TMC) polymers are quaternized chitosans in different degrees of trimethylation. These polymers enhance the absorption of macromolecules through mucosal epithelia by triggering the reversible opening of tight junctions and only allow for paracellular transport. To investigate the safety of these novel absorption enhancers cytotoxicity and ciliotoxicity studies have been performed. Intestinal Caco-2 cell monolayers were chosen to study possible membrane damaging effects of these polymers, using confocal laser scanning microscopy visualization of nuclear staining by a membrane impermeable fluorescent probe during transport of the paracellular marker Texas red dextran (MW 10 000). Ciliated chicken embryo trachea tissue was used to study the effect of the polymers on the ciliary beat frequency (CBF) in vitro. In both studies the TMC polymers of different degrees of substitution (20, 40 and 60%) were tested at a concentration of 1.0% (w/v). No substantial cell membrane damage could be detected on the Caco-2 cells treated with TMCs, while the effect on the CBF in vitro was found to be marginal. TMC60 and TMC40 enhance paracellular transport of Texas red dextran in Caco-2 cell monolayers, whereas TMC20 is ineffective. In conclusion, TMCs of high degrees of substitution may be effective and safe absorption enhancers for peptide and protein drug delivery.

Nasal drug delivery is an attractive approach for the systemic delivery of high potency drugs with a low oral bioavailability due to extensive gastrointestinal breakdown and high hepatic first-pass effect. For lipophilic drugs nasal delivery is possible if they can be dissolved in the dosage form. Peptide and protein drugs often have a low nasal bioavailability because of their large size and hydrophilicity, resulting in poor transport properties across the nasal mucosa. Cyclodextrins are used to improve the nasal absorption of these drugs by increasing their aqueous solubility and/or by enhancing their nasal absorption. With several cyclodextrins very efficient nasal drug absorption has been reported, but also large interspecies differences have been found. Studies concerning the safety of cyclodextrins in nasal drug formulations demonstrate the non-toxicity of the cyclodextrins and also clinical data show no adverse effects. Therefore, some cyclodextrins can be expected to become effective and safe excipients in nasal drug delivery.

Ciliary beat frequency (CBF) is one of the most important parameters of mucociliary clearance. Previously, we demonstrated that mucosa from chicken embryo trachea is a good substitute for human ciliated epithelium to study the effects on CBF of substances that are used clinically. In this study, we examined the effect on CBF of four excipients for nasal drug formulations: the absorption enhancers methylated beta-cyclodextrin 2% and sodium taurodihydrofusidate 1%, the preservative benzalkonium chloride 0.01%, and physiologic saline. We also examined the effect on CBF of the cryopreservative dimethyl sulfoxide, which is used to protect ciliated epithelium prior to storage in liquid nitrogen. Results obtained with chicken embryo trachea were compared with those of cryopreserved human mucosa taken from the sphenoidal sinus. For all of the substances tested, the effects on CBF of chicken material were comparable to those measured on human material. Benzalkonium chloride had a stronger ciliostatic effect on human tissue. After 60 min, however, the effect of that substance on CBF was similar in both tissues. We conclude that chicken embryo trachea can be used as a substitute for human ciliated mucosa when studying ciliary activity in vitro.

Purpose. To visualize the transport pathway(s) of high molecular weight model compounds across rat nasal epithelium in vivousing confocal laser scanning microscopy. Furthermore, the influence of nasal absorption enhancers (randomly methylated β-cyclodextrin and sodium taurodihydrofusidate) on this transport was studied.

Cationic liposomes are potential adjuvants for influenza vaccines. In a previous study we reported that among a panel of cationic liposomes loaded with influenza hemagglutinin (HA), DC-Chol:DPPC (1:1 molar ratio) liposomes induced the strongest immune response. However, it is not clear whether the cholesterol (Chol) backbone or the tertiary amine head group of DC-Chol was responsible for this. Therefore, in the present work we studied the influence of Chol in the lipid bilayer of cationic liposomes. Moreover, we investigated the effect of the HA loading method (adsorption versus encapsulation) and the encapsulation of immune modulators in DC-Chol liposomes on the immunogenicity of HA. Liposomes consisting of a neutral lipid (DPPC or Chol) and a cationic compound (DC-Chol, DDA, or eDPPC) were produced by film hydration-extrusion with/without an encapsulated immune modulator (CpG or imiquimod). The liposomes generally showed comparable size distribution, zeta potential and HA loading. In vitro studies with monocyte-derived human dendritic cells and immunization studies in C57Bl/6 mice showed that: (1) liposome-adsorbed HA is more immunogenic than encapsulated HA; (2) the incorporation of Chol in the bilayer of cationic liposomes enhances their adjuvant effect; and (3) CpG loaded liposomes are more efficient at enhancing HA-specific humoral responses than plain liposomes or Alhydrogel.

The aim of the study was to determine the acute effects of nasal absorption enhancers on the morphology of the rat nasal epithelium in vivo. Examples of three classes of enhancers were studied: the cyclodextrins dimethyl-β-cyclodextrin 2% (w/v) and randomly methylated-β-cyclodextrin 2% (w/v), the bile salt sodium glycocholate 1% (w/v), and the phospholipid L-α-lysophosphatidylcholine 1% (w/v). The preservative benzalkonium chloride 0.01% (w/v) was investigated for reasons of comparison. The compounds were dissolved in physiological saline (0.9% NaC1) and administered intranasally to anaesthetized rats. After 15 min the nasal cavity was fixated with Bouin and the tissue was processed for light microscopic examination. Morphological changes induced by physiological saline were graded as negligible or minor, and those of benzalkonium chloride as minor to major. The effects were mainly located in the respiratory epithelium. The effects of randomly methylated β-cyclodextrin and dimethyl-β-cyclodextrin were also minor and comparable to those of physiological saline. After administration of sodium glycocholate, large amounts of mucus were discharged from goblet cells and pyknosis occurred. l -α-lysophosphatidylcholine resulted in disruption of the epithelium, and damage was found not only in the respiratory epithelium but also in the olfactory epithelium. In conclusion, the acute effects of methylated β-cyclodextrins on the nasal epithelium morphology are relatively mild, and comparable to or less than those of the preservative benzalkonium chloride. Sodium glycocholate shows irreversible damage, and l -α-lysophosphatidylcholine is the most damaging absorption enhancer.

In order to estimate the potential of nasal drug formulations to influence ciliary beating, ciliary beat frequency (CBF) measurements were performed in vitro, using chicken embryo trachea and a photo-electric registration device. The effects of nasal prescription and non-prescription drug formulations were studied and compared with a number of investigational nasal drug formulations containing estradiol, dihydroergotamine mesylate and salmon calcitonin. The influence of all formulations on CBF was related to the effects of formulation additives such as preservatives and nasal absorption enhancers on the ciliated tissue. For almost all nasal drug formulations, the preservatives used in the formulations (e.g. benzalkonium chloride, chlorobutanol) play a decisive role in the observed ciliostatic effects. Methylated β-cyclodextrins, used as nasal absorption enhancers/solubilizers in the investigational formulations, appeared to be relatively non-toxic for the ciliated tissue, having similar effects on CBF as physiological saline. After dilution five times, most drug formulations studied showed a moderate ciliostatic effect, but marked differences could still be detected. The present study demonstrates that CBF measurements in vitro are a valuable tool in the design of safe nasal drug formulations.

Purpose. The assessment of the effects of nasal absorption enhancers on the rat nasal epithelium and membrane permeability in vivo after a single nasal dose of the enhancers.

The objective of the study was to compare the effectiveness of trehalose with that of melibiose in protecting a monoclonal antibody (rituximab) from aggregation, fragmentation, and secondary structure alterations during processing and subsequent storage. Because reducing disaccharides such as melibiose participate in Maillard reaction with proteins, especially in the presence of water, the lyophilizates were stored under different relative humidity (RH 5%, 11%, and 23%) atmospheres. Freeze drying was shown to cause clear alterations in rituximab secondary structure, an increase in noncovalent protein aggregation, and in some cases fragmentation. However, these changes were less pronounced in the formulation containing melibiose. Storing the lyophilizates under low RH (5%) proved to be most harmful to the stability of rituximab, intensifying secondary structure alterations and increasing protein aggregate content. Again, these changes were less aggravated in the formulation containing melibiose. Surprisingly, the concentration of aggregates larger than 1 μm decreased in some cases during storage at RH 11% and 23%. There was no indication that storage even under the highest RH (23%) would have caused significant amounts of Maillard reaction end products to be formed during 3 months of storage.

For the analysis of protein aggregates in the submicron size range, there is still a need for reliable, quantitative methods that can assist the development of therapeutic protein formulations. The aim of our study was to develop an asymmetrical flow field-flow fractionation (AF4) method for the analysis of protein aggregates in the size range of up to approximately 1000 nm. Method development was performed with polystyrene standard beads (60, 200, and 1000 nm) and a heat-stressed IgG formulation containing a substantial amount of submicron aggregates. By AF4, the analysis of these heterodisperse submicron IgG aggregates, as well as the monomer, could be achieved by a stepwise reduction of the cross-flow. The suitability of the developed AF4 method for aggregate analysis in general was demonstrated by analyzing several other stressed therapeutic protein samples (another IgG and etanercept). In each case, a clearly better separation and a more reproducible (although in some cases incomplete) recovery was achieved with AF4 as compared with high-performance size-exclusion chromatography. In conclusion, AF4 proved to be a valuable method for the characterization and quantification of submicron protein aggregates. © 2012 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 101:4129–4139, 2012

The potential of cyclodextrins, in particular dimethyl-β-cyclodextrin (DMβCD), as absorption enhancers was investigated for the nasal absorption of two peptide drugs: an ACTH (4–9) hexapeptide analogue and the polypeptide hormone, insulin. Studies in rats showed that DMβCD largely improved the absorption of both peptide drugs, resulting in bioavailabilities of 70 to 100%. The effective DMβCD concentration was in the order of 2% (w/v), and the increased permeability of the rat nasal epithelium as caused by DMβCD returned to normal physiological conditions in time. On the contrary, insulin/DMβCD solutions were ineffective in enhancing nasal insulin absorption in rabbits and men, whereas a small absorption enhancement was observed for the small ACTH (4–9) analogue in rabbits. Thus substantial interspecies differences appear to exist in the absorption of peptide drugs with DMβCD as enhancer. Nonetheless, studies in rabbits demonstrated that insulin/DMβCD powder formulations were much more effective than liquid preparations. The nasal insulin bioavailability was in the order of 13% for the insulin/DMβCD powder, and negligible for both a control insulin/lactose powder and insulin/DMβCD liquid formulations. In conclusion, the cyclodextrin derivative DMβCD is a potent enhancer of nasal peptide absorption. The efficacy of DMβCD, however, differs largely between species and is also greatly dependent upon the nasal dosage form.

The effect of the polypeptide salmon calcitonin (sCT) on serum calcium concentrations following intranasal and intravenous administration was studied in young rabbits. A small, hypocalcemic effect was observed after nasal administration of sCT without additives, indicating that the nasal sCT absorption was low. The absorption could be improved by addition of an absorption-enhancing adjuvant to the nasal preparation. The absorption, however, was still far from complete as was apparent from the much stronger effect of intravenously injected sCT. When a number of sCT doses were given during a 10-week period, the hypocalcemic effect per sCT dose in the young rabbits decreased after intravenous and, although less pronounced, after nasal administration. The decreased response to sCT is probably not related to the induction of neutralizing antibodies or desensitization of sCT receptors, but is more likely associated with the age-dependent level of bone activity.

1. The systemic absorption and the neurotrophic effect of the metabolically stabilized ACTH (4-9) analogue, Org2766, were investigated following intranasal (i.n.) administration. 2. Without additives the nasal bioavailability of the peptide was in the order of 15 and 10% in rats and rabbits, respectively. The absorption could be improved by addition of a variety of absorption enhancers to the nasal preparation. The beta-cyclodextrin derivative, dimethyl-beta-cyclodextrin (DM beta CD) at a concentration of 5% (w/v) improved the absorption in rats about 5 fold from 13 +/- 4% (mean +/- s.d.) for administration of the peptide alone to 65 +/- 21%, and in rabbits 1 to 2 fold, from 10 +/- 6% to 17 +/- 8%. 3. The increased permeability of the rat nasal mucosa for Org2766 caused by DM beta CD in rats reversed substantially within 1 h. However, the nasal absorption had not yet completely returned to the level without enhancer. 4. S.c. administered Org2766 accelerated the functional recovery from peripheral nerve damage in rats. However, the peptide did not facilitate nerve repair following i.n. administration with DM beta CD, in spite of the fact that Org2766 was well absorbed. I.v. injection of Org2766 was also ineffective.

Efficacy and safety of nasal absorption enhancers depend on many different parameters, such as their influence on nasal epithelial membrane barriers, the enzymatic activities in the nasal cavity, and the mucociliary clearance. Large interspecies differences appear to exist in the nasal absorption of drugs. Nasal absorption enhancers, although very effective in some cases, differ substantially in efficacy and safety. For a number of enhancers like surfactants, bile salts and fusidate derivatives a good relationship (similarity in rank order) can be established between the morphological damage and the influence on the ciliary beat frequency (CBF) of nasal epithelial tissue, making CBF measurements a valuable tool in the search for safe nasal absorption enhancers.

The nasal absorption of insulin using dimethyl-beta-cyclodextrin (DM beta CD) as an absorption enhancer in rabbits was studied. The nasal administration of insulin/DM beta CD liquid formulations did not result in significant changes in serum insulin and blood glucose concentrations. In contrast, previous experiments in rats showed that the addition of DM beta CD to the liquid nasal formulation resulted in an almost-complete insulin absorption, with a concomitant strong hypoglycaemic response. Apparently, the effect of the cyclodextrin derivative on insulin absorption differs between animal species following nasal delivery of insulin/DM beta CD solutions. On the other hand, nasal administration of the lyophilized insulin/DM beta CD powder dosage form in rabbits resulted in increased serum insulin concentrations, and a maximum decrease in blood glucose of about 50%. The absolute bioavailability of the nasally administered insulin/DM beta CD powder was 13 +/- 4%, compared to 1 +/- 1% for both an insulin/DM beta CD liquid and an insulin/lactose powder formulation. It is concluded that insulin powder formulations with DM beta CD as an absorption enhancer are much more effective than liquid formulations.

A major drawback in current insulin therapy is the lack of an efficient non-parenteral delivery system. Among other routes nasal administration of insulin has extensively been investigated as an alternative route for delivery. Insulin is poorly absorbed from the nasal mucosa, and it is necessary to use an absorption enhancing compound to facilitate its absorption. Many enhancers of widely differing chemical structure have been investigated in this respect. Recently, it was demonstrated that the cyclodextrin derivative, dimethyl-β-cyclodextrin (DMβCD), at a concentration of 5% (w/v) strongly improved nasal insulin absorption in rats. In the present study the effect of different concentrations of DMβCD on the absorption of intranasally administered insulin in rats was studied. Administration of 2 IU/kg insulin with 5% (w/v) DMβCD resulted in a bioavailability of approx. 100%. The minimal concentration of DMβCD required to improve the insulin absorption was 2% (w/v). Increasing the concentration to 3, 4, and 5% (w/v) resulted in a more pronounced insulin absorption, but the area under the serum concentration-time curve measured up to 1 h post administration was not significantly different from 2% DMβCD. DMβCD decreased the ciliary beat frequency of both chicken embryo trachea and human adenoid tissue in vitro. The effect was concentration dependent. For 2% DMβCD the ciliary activity was still 40% of the initial frequency at 60 min incubation in both ciliated tissue models. In conclusion, DMβCD is a potent enhancer of nasal insulin absorption in rats, already effective at concentrations that show a mild effect on in vitro ciliary movement.

The pharmacopoeia protocol for HP-SEC of insulin, using an acidic non-physiological eluent, does not represent insulin's association state in the formulation. This study aimed to evaluate insulin's elution behavior in HP-SEC in a “physiological” (aqueous, neutral pH) eluent, using on-line UV absorption and multi-angle laser light scattering detection. The effect of insulin concentration and association state in the formulation (monitored by circular dichroism) and eluent composition (zinc ion, arginine) on its elution behavior was assessed. We showed that the elution behavior of insulin in “physiological” HP-SEC is affected by both dynamic association–dissociation of insulin molecules and insulin–column interactions. Insulin molecules re-equilibrated in the HP-SEC eluent, making its elution behavior practically insensitive to the association state of insulin in the formulation. Zinc ions in the eluent promoted association of insulin to hexamers, whereas arginine overruled the effect of zinc ions and induced on-column dissociation of insulin to dimers and monomers. Combined results from “physiological” and compendial HP-SEC were shown to provide a better view of the aggregation state of heat-stressed insulin than either of the single methods. The insights obtained with this study are crucial for a proper evaluation of HP-SEC data of insulin.

Purpose To investigate degradation kinetics of oxytocin as a function of temperature and pH, and identify the degradation products. Materials and Methods Accelerated degradation of oxytocin formulated at pH 2.0, 4.5, 7.0 and 9.0 was performed at 40, 55, 70 and 80°C. Degradation rate constants were determined from RP-HPLC data. Formulations were characterized by HP-SEC, UV absorption and fluorescence spectroscopy. Degradation products were identified by ESI-MS/MS. Results The loss of intact oxytocin in RP-HPLC was pH- and temperature-dependent and followed (pseudo) first order kinetics. Degradation was fastest at pH 9.0, followed by pH 7.0, pH 2.0 and pH 4.5. The Arrhenius equation proved suitable to describe the kinetics, with the highest activation energy (116.3 kJ/mol) being found for pH 4.5 formulations. At pH 2.0 deamidation of Gln4, Asn5, and Gly9-NH2, as well as combinations thereof were found. At pH 4.5, 7.0 and 9.0, the formation of tri- and tetrasulfide-containing oxytocin as well as different types of disulfide and dityrosine-linked dimers were found to occur. Beta-elimination and larger aggregates were also observed. At pH 9.0, mono-deamidation of Gln4, Asn5, and Gly9-NH2 additionally occurred. Conclusions Multiple degradation products of oxytocin have been identified unequivocally, including various deamidated species, intramolecular oligosulfides and covalent aggregates. The strongly pH dependent degradation can be described by the Arrhenius equation.