Search

We present recent laboratory results demonstrating high-contrast coronagraphy for the future space-based large IR/Optical/Ultraviolet telescope recommended by the Decadal Survey. The High-contrast Imager for Complex Aperture Telescopes (HiCAT) testbed aims to implement a system-level hardware demonstration for segmented aperture coronagraphs with wavefront control. The telescope hardware simulator employs a segmented deformable mirror with 37 hexagonal segments that can be controlled in piston, tip, and tilt. In addition, two continuous deformable mirrors are used for high-order wavefront sensing and control. The low-order sensing subsystem includes a dedicated tip-tilt stage, a coronagraphic target acquisition camera, and a Zernike wavefront sensor that is used to measure and correct low-order aberration drifts. We explore the performance of a segmented aperture coronagraph both in static operations (limited by natural drifts and instabilities) and in dynamic operations (in the presence of artificial wavefront drifts added to the deformable mirrors), and discuss the estimation and control strategies used to reach and maintain the dark-zone contrast using our low-order wavefront sensing and control. We summarize experimental results that quantify the performance of the testbed in terms of contrast, inner/outer working angle and bandpass, and analyze limiting factors., Comment: 17 pages, 14 figures, SPIE Astronomical Telescopes + Instrumentation, 2022, Montr\'eal, Qu\'ebec, Canada

We present the final results of the Apodized Pupil Lyot Coronagraph (APLC) on the High-contrast imager for Complex Aperture Telescopes (HiCAT) testbed, under NASA's Strategic Astrophysics Technology program. The HiCAT testbed was developed over the past decade to enable a system-level demonstration of coronagraphy for exoplanet direct imaging with the future Habitable Wolds Observatory. HiCAT includes an active, segmented telescope simulator, a coronagraph, and metrology systems (Low-order and Mid-Order Zernike Wavefront Sensors, and Phase Retrieval camera). These results correspond to an off-axis (un-obscured) configuration, as was envisioned in the 2020 Decadal Survey Recommendations. Narrowband and broadband dark holes are generated using two continuous deformable mirrors (DM) to control high order wavefront aberrations, and low-order drifts can be further stabilized using the LOWFS loop. The APLC apodizers, manufactured using carbon nanotubes, were optimized for broadband performance and include the calibrated geometric aperture. HiCAT is, to this date, the only testbed facility able to demonstrate high-contrast coronagraphy with a truly segmented aperture, as is required for the Habitable World Observatory, albeit limited to ambient conditions. Results presented here include $6\times 10^{-8}$ (90% CI) contrast in 9% bandpass in a 360 deg dark hole with inner and outer working angles of $4.4 \lambda/D_{pupil}$ and $11 \lambda/D_{pupil}$ . Narrowband contrast (3% bandpass) reaches $2.4\times 10^{-8}$ (90% confidence interval)., Comment: 17 pages, 16 figures, SPIE Astronomical Telescopes + Instrumentation, 2024, Yokohama, Japan

The Roman Space Telescope will be a critical mission to demonstrate high-contrast imaging technologies allowing for the characterisation of exoplanets in reflected light. It will demonstrate $10^{-7}$ contrast limits or better at 3--9 $\lambda / D$ separations with active wavefront control for the first time in space. The detection limits for the Coronagraph Instrument are expected to be set by wavefront variations between the science target and the reference star observations. We are investigating methods to use the deformablel mirrors to methodically probe the impact of such variations on the coronagraphic PSF, generating a PSF library during observations of the reference star to optimise the starlight subtraction at post-processing. We are collaborating with STScI to test and validate these methods in lab using the HiCAT tested, a high-contrast imaging lab platform dedicated to system-level developments for future space missions. In this paper, we will present the first applications of these methods on HiCAT.

One of the primary science goals of the Habitable Worlds Observatory (HWO) as defined by the Astro2020 decadal survey is the imaging of the first Earth-like planet around a Sun-like star. A key technology gap towards reaching this goal are the development of ultra-low-noise photon counting detectors capable of measuring the incredibly low count rates coming from these planets which are at contrasts of $\sim 1 \times 10^{-10}$. Superconducting energy-resolving detectors (ERDs) are a promising technology for this purpose as, despite their technological challenges, needing to be cooled below their superconducting transition temperature ($< 1\mathrm{K}$), they have essentially zero read noise, dark current, or clock-induced charge, and can get the wavelength of each incident photon without the use of additional throughput-reducing filters or gratings that spread light over many pixels. The use of these detectors on HWO will not only impact the science of the mission by decreasing the required exposure times for exo-Earth detection and characterization, but also in a wavefront sensing and control context when used for starlight suppression to generate a dark zone. We show simulated results using both an EMCCD and an ERD to ``dig a dark zone'' demonstrating that ERDs can achieve the same final contrast as an EMCCD in about half of the total time. We also perform a simple case study using an exposure time calculator tool called the Error Budget Software (EBS) to determine the required integration times to detect water for HWO targets of interest using both EMCCDs and ERDs. This shows that once a dark zone is achieved, using an ERD can decrease these exposure times by factors of 1.5--2 depending on the specific host star properties., Comment: 13 pages, 7 figures

We study a mid-order wavefront sensor (MOWFS) to address fine cophasing errors in exoplanet imaging with future large segmented aperture space telescopes. Observing Earth analogs around Sun-like stars requires contrasts down to $10^{-10}$ in visible light. One promising solution consists of producing a high-contrast dark zone in the image of an observed star. In a space observatory, this dark region will be altered by several effects, and among them, the small misalignments of the telescope mirror segments due to fine thermo-mechanical drifts. To correct for these errors in real time, we investigate a wavefront control loop based on a MOWFS with a Zernike sensor. Such a MOWFS was installed on the high-contrast imager for complex aperture telescopes (HiCAT) testbed in Baltimore in June 2023. The bench uses a 37-segment Iris-AO deformable mirror to mimic telescope segmentation and some wavefront control strategies to produce a dark zone with such an aperture. In this contribution, we first use the MOWFS to characterize the Iris-AO segment discretization steps. For the central segment, we find a minimal step of 125 $\pm$ 31 pm. This result will help us to assess the contribution of the Iris-AO DM on the contrast in HiCAT. We then determine the detection limits of the MOWFS, estimating wavefront error amplitudes of 119 and 102 pm for 10 s and 1 min exposure time with a SNR of 3. These values inform us about the measurement capabilities of our wavefront sensor on the testbed. These preliminary results will be useful to provide insights on metrology and stability for exo-Earth observations with the Habitable Worlds Observatory., Comment: 9 pages, 6 figures

We summarize the current best polychromatic (10 to 20 % bandwidth) contrast performance demonstrated in the laboratory by different starlight suppression approaches and systems designed to directly characterize exoplanets around nearby stars. We present results obtained by internal coronagraph and external starshade experimental testbeds using entrance apertures equivalent to off-axis or on-axis telescopes, either monolithic or segmented. For a given angular separation and spectral bandwidth, the performance of each starlight suppression system is characterized by the values of raw contrast (before image processing), off-axis (exoplanet) core throughput, and post-calibration contrast (the final 1 sigma detection limit of off-axis point sources, after image processing). To place the current laboratory results in the perspective of the future Habitable Worlds Observatory (HWO) mission, we simulate visible observations of a fiducial Earth/Sun twin system at 12 pc, assuming a 6m (inscribed diameter) collecting aperture and a realistic end-to-end optical throughput. The exposure times required for broadband exoearth detection (20% bandwidth around a wavelength of 0.55 microns) and visible spectroscopic observations (R=70) are then computed assuming various levels of starlight suppression performance, including the values currently demonstrated in the laboratory. Using spectroscopic exposure time as a simple metric, our results point to key starlight suppression system design performance improvements and trades to be conducted in support of HWO exoplanet science capabilities. These trades may be explored via numerical studies, lab experiments, as well as high contrast space-based observations and demonstrations., Comment: 63 pages, 28 pages, submitted to JATIS

Spatially-resolved images of debris disks are necessary to determine disk morphological properties and the scattering phase function (SPF) which quantifies the brightness of scattered light as a function of phase angle. Current high-contrast imaging instruments have successfully resolved several dozens of debris disks around other stars, but few studies have investigated trends in the scattered-light, resolved population of debris disks in a uniform and consistent manner. We have combined Karhunen-Loeve Image Projection (KLIP) with radiative-transfer disk forward modeling in order to obtain the highest quality image reductions and constrain disk morphological properties of eight debris disks imaged by the Gemini Planet Imager at H-band with a consistent and uniformly-applied approach. In describing the scattering properties of our models, we assume a common SPF informed from solar system dust scattering measurements and apply it to all systems. We identify a diverse range of dust density properties among the sample, including critical radius, radial width, and vertical width. We also identify radially narrow and vertically extended disks that may have resulted from substellar companion perturbations, along with a tentative positive trend in disk eccentricity with relative disk width. We also find that using a common SPF can achieve reasonable model fits for disks that are axisymmetric and asymmetric when fitting models to each side of the disk independently, suggesting that scattering behavior from debris disks may be similar to Solar System dust., Comment: 23+5 pages, 12+6 figures, 15 pages of Online Supplemental Material included; Accepted for publication in MNRAS

We present the first JWST MIRI and NIRCam observations of the prominent debris disk around Beta Pictoris. Coronagraphic observations in 8 filters spanning from 1.8 to 23~$\mu$m provide an unprecedentedly clear view of the disk at these wavelengths. The objectives of the observing program were to investigate the dust composition and distribution, and to investigate the presence of planets in the system. In this paper, we focus on the disk components, providing surface brightness measurements for all images and a detailed investigation of the asymmetries observed. A companion paper by Kammerer et al. will focus on the planets in this system using the same data. We report for the first time the presence of an extended secondary disk in thermal emission, with a curved extension bent away from the plane of the disk. This feature, which we refer to as the ``cat's tail", seems to be connected with the previously reported CO clump, mid-infrared asymmetry detected in the southwest side, and the warp observed in scattered light. We present a model of this secondary disk sporadically producing dust that broadly reproduces the morphology, flux, and color of the cat's tail, as well as other features observed in the disk, and suggests the secondary disk is composed largely of porous, organic refractory dust grains., Comment: Accepted to be published in AJ. 37 pages, 21 figures

The Gemini Planet Imager (GPI) has excelled in imaging debris disks in the near-infrared. The GPI Exoplanet Survey (GPIES) imaged twenty-four debris disks in polarized $H$-band light, while other programs observed half of these disks in polarized $J$- and/or $K1$-bands. Using these data, we present a uniform analysis of the morphology of each disk to find asymmetries suggestive of perturbations, particularly those due to planet-disk interactions. The multi-wavelength surface brightness, the disk color and geometry permit identification of any asymmetries such as warps or disk offsets from the central star. We find that nineteen of the disks in this sample exhibit asymmetries in surface brightness, disk color, disk geometry, or a combination of the three, suggesting that for this sample, perturbations, as seen in scattered light, are common. The relationship between these perturbations and potential planets in the system are discussed. We also explore correlations among stellar temperatures, ages, disk properties, and observed perturbations. We find significant trends between the vertical aspect ratio and the stellar temperature, disk radial extent, and the dust grain size distribution power-law, $q$. We also confirm a trend between the disk color and stellar effective temperature, where the disk becomes increasingly red/neutral with increasing temperature. Such results have important implications on the evolution of debris disk systems around stars of various spectral types., Comment: 46 pages, 20 figures, 6 tables, accepted for publication in ApJ

The JWST NIRSpec integral field unit (IFU) presents a unique opportunity to observe directly imaged exoplanets from 3-5 um at moderate spectral resolution (R~2,700) and thereby better constrain the composition, disequilibrium chemistry, and cloud properties of their atmospheres. In this work, we present the first NIRSpec IFU high-contrast observations of a substellar companion that requires starlight suppression techniques. We develop specific data reduction strategies to study faint companions around bright stars, and assess the performance of NIRSpec at high contrast. First, we demonstrate an approach to forward model the companion signal and the starlight directly in the detector images, which mitigates the effects of NIRSpec's spatial undersampling. We demonstrate a sensitivity to planets that are 3e-6 fainter than their stars at 1'', or 3e-5 at 0.3''. Then, we implement a reference star point spread function (PSF) subtraction and a spectral extraction that does not require spatially and spectrally regularly sampled spectral cubes. This allows us to extract a moderate resolution (R~2,700) spectrum of the faint T-dwarf companion HD 19467 B from 2.9-5.2 um with signal-to-noise ratio (S/N)~10 per resolution element. Across this wavelength range, HD~19467~B has a flux ratio varying between 1e-5-1e-4 and a separation relative to its star of 1.6''. A companion paper by Hoch et al. more deeply analyzes the atmospheric properties of this companion based on the extracted spectrum. Using the methods developed here, NIRSpec's sensitivity may enable direct detection and spectral characterization of relatively old (~1 Gyr), cool (~250 K), and closely separated (~3-5 au) exoplanets that are less massive than Jupiter., Comment: Accepted to AJ. The data analysis scripts for this work are published https://github.com/jruffio/HD_19467_B (https://zenodo.org/doi/10.5281/zenodo.11391740). The main revisions of the manuscript are listed in the change history section of the readme

Twenty-six years ago a small committee report, building on earlier studies, expounded a compelling and poetic vision for the future of astronomy, calling for an infrared-optimized space telescope with an aperture of at least $4m$. With the support of their governments in the US, Europe, and Canada, 20,000 people realized that vision as the $6.5m$ James Webb Space Telescope. A generation of astronomers will celebrate their accomplishments for the life of the mission, potentially as long as 20 years, and beyond. This report and the scientific discoveries that follow are extended thank-you notes to the 20,000 team members. The telescope is working perfectly, with much better image quality than expected. In this and accompanying papers, we give a brief history, describe the observatory, outline its objectives and current observing program, and discuss the inventions and people who made it possible. We cite detailed reports on the design and the measured performance on orbit., Comment: Accepted by PASP for the special issue on The James Webb Space Telescope Overview, 29 pages, 4 figures

Planetesimals -- asteroids and comets -- are the building blocks of planets in protoplanetary discs and the source of dust, ice and gas in debris discs. Along with planets they comprise the left-over material after star formation that constitutes a planetary system. Planets influence the dynamics of planetesimals, sculpting the orbits of debris belts to produce asymmetries or gaps. We can constrain the architecture of planetary systems, and infer the presence of unseen planetary companions, by high spatial resolution imaging of debris discs. HD~16743 is a relatively young F-type star that hosts a bright edge-on debris disc. Based on far-infrared \textit{Herschel} observations its disc was thought to be stirred by a planetary companion. Here we present the first spatially resolved observations at near-infrared and millimetre wavelengths with \textit{HST} and ALMA, revealing the disc to be highly inclined at $87\fdg3~^{+1\fdg9}_{-2\fdg5}$ with a radial extent of 157.7$^{+2.6}_{-1.5}$~au and a FWHM of 79.4$^{+8.1}_{-7.8}$~au ($\Delta R/R = 0.5$). The vertical scale height of the disc is $0.13~\pm~0.02$, significantly greater than typically assumed unstirred value of 0.05, and could be indicative of stirring of the dust-producing planetesimals within the disc by bodies at least a few times the mass of Pluto up to 18.3~$M_{\oplus}$ in the single object limit., Comment: 12 pages, 7 figures, 4 tables, accepted for publication in MNRAS

The HR 2562 system is a rare case where a brown dwarf companion resides in a cleared inner hole of a debris disk, offering invaluable opportunities to study the dynamical interaction between a substellar companion and a dusty disk. We present the first ALMA observation of the system as well as the continued GPI monitoring of the companion's orbit with 6 new epochs from 2016 to 2018. We update the orbital fit and, in combination with absolute astrometry from GAIA, place a 3$\sigma$ upper limit of 18.5 $M_J$ on the companion's mass. To interpret the ALMA observations, we used radiative transfer modeling to determine the disk properties. We find that the disk is well resolved and nearly edge on. While the misalignment angle between the disk and the orbit is weakly constrained due to the short orbital arc available, the data strongly support a (near) coplanar geometry for the system. Furthermore, we find that the models that describe the ALMA data best have an inner radius that is close to the companion's semi-major axis. Including a posteriori knowledge of the system's SED further narrows the constraints on the disk's inner radius and place it at a location that is in reasonable agreement with, possibly interior to, predictions from existing dynamical models of disk truncation by an interior substellar companion. HR\,2562 has the potential over the next few years to become a new testbed for dynamical interaction between a debris disk and a substellar companion., Comment: 22 pages, 17 figures

Multi-wavelength scattered light imaging of debris disks may inform dust properties including typical size and mineral composition. Existing studies have investigated a small set of individual systems across a variety of imaging instruments and filters, calling for uniform comparison studies to systematically investigate dust properties. We obtain the surface brightness of dust particles in debris disks by post-processing coronagraphic imaging observations, and compare the multi-wavelength reflectance of dust. For a sample of resolved debris disks, we perform a systematic analysis on the reflectance properties of their birth rings. We reduced the visible and near-infrared images of 23 debris disk systems hosted by A through M stars using two coronagraphs onboard the Hubble Space Telescope: the STIS instrument observations centering at 0.58 $\mu$m, and the NICMOS instrument at 1.12 $\mu$m or 1.60 $\mu$m. For proper recovery of debris disks, we used classical reference differential imaging for STIS, and adopted non-negative matrix factorization with forward modeling for NICMOS. By dividing disk signals by stellar signals to take into account of intrinsic stellar color effects, we systematically obtained and compared the reflectance of debris birth rings at ~90 deg scattering angle. Debris birth rings typically exhibit a blue color at ~90 deg scattering angle. As the stellar luminosity increases, the color tends to be more neutral. A likely L-shaped color-albedo distribution indicates a clustering of scatterer properties. The observed color trend correlates with the expected blow-out size of dust particles. The color-albedo clustering likely suggests different populations of dust in these systems. More detailed radiative transfer models with realistic dust morphology will contribute to explaining the observed color and color-albedo distribution of debris systems., Comment: 17 pages, 8 figures, 3 tables. A&A accepted

Wavefront sensing and control (WFSC) will play a key role in improving the stability of future large segmented space telescopes while relaxing the thermo-mechanical constraints on the observatory structure. Coupled with a coronagraph to reject the light of an observed bright star, WFSC enables the generation and stabilisation of a dark hole (DH) in the star image to perform planet observations. While WFSC traditionally relies on a single wavefront sensor (WFS) input to measure wavefront errors, the next generation of instruments will require several WFSs to address aberrations with different sets of spatial and temporal frequency contents. The multiple measurements produced in such a way will then have to be combined and converted to commands for deformable mirrors (DMs) to modify the wavefront subsequently. We asynchronously operate a loop controlling the high-order modes digging a DH and a control loop that uses the rejected light by a Lyot coronagraph with a Zernike wavefront sensor to stabilize the low-order aberrations. Using the HiCAT testbed with a segmented telescope aperture, we implement concurrent operations and quantify the expected cross-talk between the two controllers. We then present experiments that alternate high-order and low-order control loops to identify and estimate their respective contributions. We show an efficient combination of the high-order and low-order control loops, keeping a DH contrast better than 5 x 10-8 over a 30 min experiment and stability improvement by a factor of 1.5. In particular, we show a contrast gain of 1.5 at separations close to the DH inner working angle, thanks to the low-order controller contribution. Concurrently digging a DH and using the light rejected by a Lyot coronagraph to stabilize the wavefront is a promising path towards exoplanet imaging and spectroscopy with future large space observatories.

We present a publicly available software package developed for exploring apodized pupil Lyot coronagraph (APLC) solutions for various telescope architectures. In particular, the package optimizes the apodizer component of the APLC for a given focal-plane mask and Lyot stop geometry to meet a set of constraints (contrast, bandwidth etc.) on the coronagraph intensity in a given focal-plane region (i.e. dark zone). The package combines a high-contrast imaging simulation package HCIPy with a third-party mathematical optimizer (Gurobi) to compute the linearly optimized binary mask that maximizes transmission. We provide examples of the application of this toolkit to several different telescope geometries, including the Gemini Planet Imager (GPI) and the High-contrast imager for Complex Aperture Telescopes (HiCAT) testbed. Finally, we summarize the results of a preliminary design survey for the case of a 6~m aperture off-axis space telescope, as recommended by the 2020 NASA Decadal Survey, exploring APLC solutions for different segment sizes. We then use the Pair-based Analytical model for Segmented Telescope Imaging from Space (PASTIS) to perform a segmented wavefront error tolerancing analysis on these solutions., Comment: 17 pages, 16 figures, SPIE conference

The Gemini Planet Imager (GPI) is an integral field spectrograph (IFS) and coronagraph that is one of the few current generation instruments optimized for high-contrast direct imaging of substellar companions. The instrument is in the process of being upgraded and moved from its current mount on the Gemini South Observatory in Cerro Pachon, Chile, to its twin observatory, Gemini North, on Mauna Kea (a process colloquially dubbed 'GPI 2.0'). We present the designs that have been developed for the part of GPI 2.0 that pertains to upgrading various optical components of the GPI coronagraphic system. More specifically, we present new designs for the apodizer and Lyot stop (LS) that achieve better raw contrast at the inner working angle of the dark zone as well as improved core throughput while retaining a similar level of robustness to LS misalignment. To generate these upgraded designs, we use our own publicly available software package called APLC-Optimization that combines a commercial linear solver (Gurobi) with a high contrast imaging simulation package (HCIPy) in order to iteratively propagate light through a simulated model of an apodized phase lyot coronagraph (APLC), optimizing for the best coronagraph performance metrics. The designs have recently finished being lithographically printed by a commercial manufacturer and will be ready for use when GPI 2.0 goes on-sky in 2023., Comment: Conference proceedings published in SPIE Astronomical Telescopes + Instrumentation (July 2022), 12 pages, 7 figures

We present a segment-level wavefront stability error budget for space telescopes essential for exoplanet detection. We use a detailed finite element model to relate the temperature gradient at the location of the primary mirror to wavefront variations on each of the segment. We apply the PASTIS sensitivity model forward approach to allocate static tolerances in physical units for each segment, and transfer these tolerances to the temporal domain via a model of the WFS&C architecture in combination with a Zernike phase sensor and science camera. We finally estimate the close-loop variance and limiting contrast for the segments' thermo-mechanical modes., Comment: 13 pages, 7 figures, appeared in the Proceedings of SPIE Astronomical Telescopes + Instrumentation, 2022

In a cold and stable space environment, the James Webb Space Telescope (JWST or "Webb") reaches unprecedented sensitivities at wavelengths beyond 2 microns, serving most fields of astrophysics. It also extends the parameter space of high-contrast imaging in the near and mid-infrared. Launched in late 2021, JWST underwent a six month commissioning period. In this contribution we focus on the NIRCam Coronagraphy mode which was declared "science ready" on July 10 2022, the last of the 17 JWST observing modes. Essentially, this mode will allow to detect fainter/redder/colder (less massive for a given age) self-luminous exoplanets as well as other faint astrophysical signal in the vicinity of any bright object (stars or galaxies). Here we describe some of the steps and hurdles the commissioning team went through to achieve excellent performances. Specifically, we focus on the Coronagraphic Suppression Verification activity. We were able to produce firm detections at 3.35$\mu$m of the white dwarf companion HD 114174 B which is at a separation of $\simeq$ 0.5" and a contrast of $\simeq$ 10 magnitudes ($10^{4}$ fainter than the K$\sim$5.3 mag host star). We compare these first on-sky images with our latest, most informed and realistic end-to-end simulations through the same pipeline. Additionally we provide information on how we succeeded with the target acquisition with all five NIRCam focal plane masks and their four corresponding wedged Lyot stops., Comment: 23 pages, 18 figures, to appear in the Proceedings of the SPIE Astronomical Telescopes + Instrumentation (2022)

Combining large segmented space telescopes, coronagraphy and wavefront control methods is a promising solution to produce a dark hole (DH) region in the coronagraphic image of an observed star and study planetary companions. The thermal and mechanical evolution of such a high-contrast facility leads to wavefront drifts that degrade the DH contrast during the observing time, thus limiting the ability to retrieve planetary signals. Lyot-style coronagraphs are starlight suppression systems that remove the central part of the image for an unresolved observed star, the point spread function, with an opaque focal plane mask (FPM). When implemented with a flat mirror containing an etched pinhole, the mask rejects part of the starlight through the pinhole which can be used to retrieve information about low-order aberrations. We propose an active control scheme using a Zernike wavefront sensor (ZWFS) to analyze the light rejected by the FPM, control low-order aberrations, and stabilize the DH contrast. The concept formalism is first presented before characterizing the sensor behavior in simulations and in laboratory. We then perform experimental tests to validate a wavefront control loop using a ZWFS on the HiCAT testbed. By controlling the first 11 Zernike modes, we show a decrease in wavefront error standard deviation by a factor of up to 9 between open- and closed-loop operations using the ZWFS. In the presence of wavefront perturbations, we show the ability of this control loop to stabilize a DH contrast around 7x10^-8 with a standard deviation of 7x10^-9. Active control with a ZWFS proves a promising solution in Lyot coronagraphs with an FPM-filtered beam to control and stabilize low-order wavefront aberrations and DH contrast for exoplanet imaging with future space missions.

Context: The detection and characterization of Earth-like exoplanets (exoEarths) from space requires exquisite wavefront stability at contrast levels of $10^{-10}$. On segmented telescopes in particular, aberrations induced by cophasing errors lead to a light leakage through the coronagraph, deteriorating the imaging performance. These need to be limited in order to facilitate the direct imaging of exoEarths. Aims: We perform a laboratory validation of an analytical tolerancing model that allows us to determine wavefront error requirements in the $10^{-6} - 10^{-8}$ contrast regime, for a segmented pupil with a classical Lyot coronagraph. We intend to compare the results to simulations, and we aim to establish an error budget for the segmented mirror on the High-contrast imager for Complex Aperture Telescopes (HiCAT) testbed. Methods: We use the Pair-based Analytical model for Segmented Telescope Imaging from Space (PASTIS) to measure a contrast influence matrix of a real high contrast instrument, and use an analytical model inversion to calculate per-segment wavefront error tolerances. We validate these tolerances on the HiCAT testbed by measuring the contrast response of segmented mirror states that follow these requirements. Results: The experimentally measured optical influence matrix is successfully measured on the HiCAT testbed, and we derive individual segment tolerances from it that correctly yield the targeted contrast levels. Further, the analytical expressions that predict a contrast mean and variance from a given segment covariance matrix are confirmed experimentally., Comment: 16 pages, 16 figures, accepted for publication in A&A

Future large segmented space telescopes and their coronagraphic instruments are expected to provide the resolution and sensitivity to observe Earth-like planets with a 10^10 contrast ratio at less than 100 mas from their host star. Advanced coronagraphs and wavefront control methods will enable the generation of high-contrast dark holes in the image of an observed star. However, drifts in the optical path of the system will lead to pointing errors and other critical low-order aberrations that will prevent maintenance of this contrast. To measure and correct for these errors, we explore the use of a Zernike wavefront sensor (ZWFS) in the starlight rejected and filtered by the focal plane mask of a Lyot-type coronagraph. In our previous work, the analytical phase reconstruction formalism of the ZWFS was adapted for a filtered beam. We now explore strategies to actively compensate for these drifts in a segmented pupil setup on the High-contrast imager for Complex Aperture Telescopes (HiCAT). This contribution presents laboratory results from closed-loop compensation of bench internal turbulence as well as known introduced aberrations using phase conjugation and interaction matrix approaches. We also study the contrast recovery in the image plane dark hole when using a closed loop based on the ZWFS., Comment: Presented at SPIE Optical Engineerint + Applications 2021

Due to the limited number of photons, directly imaging planets requires long integration times with a coronagraphic instrument. The wavefront must be stable on the same time scale, which is often difficult in space due to thermal variations and other mechanical instabilities. In this paper, we discuss the implications on future space mission observing conditions of our recent laboratory demonstration of a dark zone maintenance (DZM) algorithm. The experiments are performed on the High-contrast imager for Complex Aperture Telescopes (HiCAT) at the Space Telescope Science Institute (STScI). The testbed contains a segmented aperture, a pair of continuous deformable mirrors (DMs), and a lyot coronagraph. The segmented aperture injects high order wavefront aberration drifts into the system which are then corrected by the DMs downstream via the DZM algorithm. We investigate various drift modes including segmented aperture drift, all three DMs drift simultaneously, and drift correction at multiple wavelengths., Comment: Submitted to OP210 SPIE Optical Engineering + Applications, Techniques and Instrumentation for Detection of Exoplanets X | 14 pages, 5 figures

The characterization of exoplanet atmospheres using direct imaging spectroscopy requires high-contrast over a wide wavelength range. We study a recently proposed focal plane wavefront estimation algorithm that exclusively uses broadband images to estimate the electric field. This approach therefore reduces the complexity and observational overheads compared to traditional single wavelength approaches. The electric field is estimated as an incoherent sum of monochromatic intensities with the pair-wise probing technique. This paper covers the detailed implementation of the algorithm and an application to the High-contrast Imager for Complex Aperture Telescopes (HiCAT) testbed with the goal to compare the performance between the broadband and traditional narrowband filter approaches., Comment: Submitted to OP21O SPIE Optical Engineering + Applications, Techniques and Instrumentation for Detection of Exoplanets X | 11 pages, 7 figures

We have obtained Hubble Space Telescope (HST) coronagraphic observations of the circumstellar disk around M star TWA 7 using the STIS instrument in visible light. Together with archival observations including HST/NICMOS using the F160W filter and Very Large Telescope/SPHERE at $H$-band in polarized light, we investigate the system in scattered light. By studying this nearly face-on system using geometric disk models and Henyey--Greenstein phase functions, we report new discovery of a tertiary ring and a clump. We identify a layered architecture: three rings, a spiral, and an ${\approx}150$ au$^2$ elliptical clump. The most extended ring peaks at $28$ au, and the other components are on its outskirts. Our point source detection limit calculations demonstrate the necessity of disk modeling in imaging fainter planets. Morphologically, we witness a clockwise spiral motion, and the motion pattern is consistent with both solid body and local Keplerian; we also observe underdensity regions for the secondary ring that might result from mean motion resonance or moving shadows: both call for re-observations to determine their nature. Comparing multi-instrument observations, we obtain blue STIS-NICMOS color, STIS-SPHERE radial distribution peak difference for the tertiary ring, and high SPHERE-NICMOS polarization fraction; these aspects indicate that TWA 7 could retain small dust particles. By viewing the debris disk around M star TWA 7 at a nearly face-on vantage point, our study allows for the understanding of such disks in scattered light in both system architecture and dust property., Comment: 20 pages, 10 figures, 3 tables, ApJ accepted. Data and animation available in the ancillary folder. Citation fixed, author list updated

This paper introduces an analytical method to calculate segment-level wavefront error tolerances in order to enable the detection of faint extra-solar planets using segmented telescopes in space. This study provides a full treatment of spatially uncorrelated segment phasing errors for segmented telescope coronagraphy, which has so far only been approached using ad hoc Monte-Carlo simulations. Instead of describing the wavefront tolerance globally for all segments, our method produces spatially dependent requirements. We relate the statistical mean contrast in the coronagraph dark hole to the standard deviation of the wavefront error of each individual segment on the primary mirror. This statistical framework for segment-level tolerancing extends the Pair-based Analytical model for Segmented Telescope Imaging from Space (PASTIS), which is based uniquely on a matrix multiplication for the optical propagation. We confirm our analytical results with Monte-Carlo simulations of E2E optical propagations through a coronagraph. Comparing our results for the Apodized Pupil Lyot Coronagraph designs for the Large UltraViolet Optical InfraRed (LUVOIR) telescope to previous studies, we show general agreement but provide a relaxation of the requirements for a significant subset of segments. These requirement maps are unique to any given telescope geometry and coronagraph design. The spatially uncorrelated segment tolerances we calculate are a key element of a complete error budget that will also need to include allocations for correlated segment contributions. We discuss how the PASTIS formalism can be extended to the spatially correlated case by deriving the statistical mean contrast and its variance for a non-diagonal aberration covariance matrix. The PASTIS tolerancing framework therefore brings a new capability that is necessary for the global tolerancing of future segmented space observatories., Comment: 32 pages, 18 figures, accepted for publication in JATIS

Modern coronagraph design relies on advanced, large-scale optimization processes that require an ever increasing amount of computational resources. In this paper, we restrict ourselves to the design of Apodized Pupil Lyot Coronagraphs (APLCs). To produce APLC designs for future giant space telescopes, we require a fine sampling for the apodizer to resolve all small features, such as segment gaps, in the telescope pupil. Additionally, we require the coronagraph to operate in broadband light and be insensitive to small misalignments of the Lyot stop. For future designs we want to include passive suppression of low-order aberrations and finite stellar diameters. The memory requirements for such an optimization would exceed multiple terabytes for the problem matrix alone. We therefore want to reduce the number of variables and constraints to minimize the size of the problem matrix. We show how symmetries in the pupil and Lyot stop are expressed in the complete optimization problem, and allow removal of both variables and constraints. Each mirror symmetry reduces the problem size by a factor of four. Secondly, we introduce progressive refinement, which uses low-resolution optimizations as a prior for higher resolutions. This lets us remove the majority of variables from the high-resolution optimization. Together these two improvements require up to 256x less computer memory, with a corresponding speed increase. This allows for greater exploration of the phase space of the focal-plane mask and Lyot-stop geometry, and easier simulation of sensitivity to Lyot-stop misalignments. Moreover, apodizers can now be optimized at their native manufactured resolution., Comment: 17 pages, 8 figures, 2 tables, SPIE Proceedings 11443-165

Imaging exo-Earths is an exciting but challenging task because of the 10^-10 contrast ratio between these planets and their host star at separations narrower than 100 mas. Large segmented aperture space telescopes enable the sensitivity needed to observe a large number of planets. Combined with coronagraphs with wavefront control, they present a promising avenue to generate a high-contrast region in the image of an observed star. Another key aspect is the required stability in telescope pointing, focusing, and co-phasing of the segments of the telescope primary mirror for long-exposure observations of rocky planets for several hours to a few days. These wavefront errors should be stable down to a few tens of picometers RMS, requiring a permanent active correction of these errors during the observing sequence. To calibrate these pointing errors and other critical low-order aberrations, we propose a wavefront sensing path based on Zernike phase-contrast methods to analyze the starlight that is filtered out by the coronagraph at the telescope focus. In this work we present the analytical retrieval of the incoming low order aberrations in the starlight beam that is filtered out by an Apodized Pupil Lyot Coronagraph, one of the leading coronagraph types for starlight suppression. We implement this approach numerically for the active control of these aberrations and present an application with our first experimental results on the High-contrast imager for Complex Aperture Telescopes (HiCAT) testbed, the STScI testbed for Earth-twin observations with future large space observatories, such as LUVOIR and HabEx, two NASA flagship mission concepts., Comment: Presented at SPIE Astronomical Telescopes + Instrumentation 2020

This paper presents the setup for empirical validations of the Pair-based Analytical model for Segmented Telescope Imaging from Space (PASTIS) tolerancing model for segmented coronagraphy. We show the hardware configuration of the High-contrast imager for Complex Aperture Telescopes (HiCAT) testbed on which these experiments will be conducted at an intermediate contrast regime between $10^{-6}$ and $10^{-8}$. We describe the optical performance of the testbed with a classical Lyot coronagraph and describe the recent hardware upgrade to a segmented mode, using an IrisAO segmented deformable mirror. Implementing experiments on HiCAT is made easy through its top-level control infrastructure that uses the same code base to run on the real testbed, or to invoke the optical simulator. The experiments presented in this paper are run on the HiCAT testbed emulator, which makes them ready to be performed on actual hardware. We show results of three experiments with results from the emulator, with the goal to demonstrate PASTIS on hardware next. We measure the testbed PASTIS matrix, and validate the PASTIS analytical propagation model by comparing its contrast predictions to simulator results. We perform the tolerancing analysis on the optical eigenmodes (PASTIS modes) and on independent segments, then validate these results in respective experiments. This work prepares and enables the experimental validation of the analytical segment-based tolerancing model for segmented aperture coronagraphy with the specific application to the HiCAT testbed., Comment: 18 pages, 9 figures, published

We present new near-infrared Gemini Planet Imager (GPI) spectroscopy of HD 206893 B, a substellar companion orbiting within the debris disk of its F5V star. The $J$, $H$, $K1$, and $K2$ spectra from GPI demonstrate the extraordinarily red colors of the object, confirming it as the reddest substellar object observed to date. The significant flux increase throughout the infrared presents a challenging atmosphere to model with existing grids. Best-fit values vary from 1200 K to 1800 K for effective temperature and from 3.0 to 5.0 for log($g$), depending on which individual wavelength band is fit and which model suite is applied. The extreme redness of the companion can be partially reconciled by invoking a high-altitude layer of sub-micron dust particles, similar to dereddening approaches applied to the peculiar red field L-dwarf population. However, reconciling the HD 206893 B spectra with even those of the reddest low-gravity L-dwarf spectra still requires the contribution of additional atmospheric dust, potentially due to the debris disk environment in which the companion resides. Orbit fitting from four years of astrometric monitoring is consistent with a $\sim$30-year period, orbital inclination of 147$^{\circ}$, and semimajor axis of 10 au, well within the estimated disk inner radius of $\sim$50 au. As one of very few substellar companions imaged interior to a circumstellar disk, the properties of this system offer important dynamical constraints on companion-disk interaction and provide a benchmark for substellar and planetary atmospheric study., Comment: Accepted for publication in AJ (October 15, 2020). 35 pages, 20 figures, with tables and appendices presented in their entirety

We have obtained Gemini Planet Imager (GPI) J-, H-, K1-, and K2-Spec observations of the iconic debris ring around the young, main-sequence star HR 4796A. We applied several point-spread function (PSF) subtraction techniques to the observations (Mask-and-Interpolate, RDI-NMF, RDI-KLIP, and ADI-KLIP) to measure the geometric parameters and the scattering phase function for the disk. To understand the systematic errors associated with PSF subtraction, we also forward-modeled the observations using a Markov Chain Monte Carlo framework and a simple model for the disk. We found that measurements of the disk geometric parameters were robust, with all of our analyses yielding consistent results; however, measurements of the scattering phase function were challenging to reconstruct from PSF-subtracted images, despite extensive testing. As a result, we estimated the scattering phase function using disk modeling. We searched for a dependence of the scattering phase function with respect to the GPI filters but found none. We compared the H-band scattering phase function with that measured by Hubble Space Telescope STIS at visual wavelengths and discovered a blue color at small scattering angles and a red color at large scattering angles, consistent with predictions and laboratory measurements of large grains. Finally, we successfully modeled the SPHERE H2 HR 4796A scattered phase function using a distribution of hollow spheres composed of silicates, carbon, and metallic iron., Comment: 34 pages, 30 figures, accepted in ApJ

Direct imaging of Earth-like planets from space requires dedicated observatories, combining large segmented apertures with instruments and techniques such as coronagraphs, wavefront sensors, and wavefront control in order to reach the high contrast of 10^10 that is required. The complexity of these systems would be increased by the segmentation of the primary mirror, which allows for the larger diameters necessary to image Earth-like planets but also introduces specific patterns in the image due to the pupil shape and segmentation and making high-contrast imaging more challenging. Among these defects, the phasing errors of the primary mirror are a strong limitation to the performance. In this paper, we focus on the wavefront sensing of segment phasing errors for a high-contrast system, using the COronagraphic Focal plane wave-Front Estimation for Exoplanet detection (COFFEE) technique. We implemented and tested COFFEE on the High-contrast imaging for Complex Aperture Telescopes (HiCAT) testbed, in a configuration without any coronagraph and with a classical Lyot coronagraph, to reconstruct errors applied on a 37 segment mirror. We analysed the quality and limitations of the reconstructions. We demonstrate that COFFEE is able to estimate correctly the phasing errors of a segmented telescope for piston, tip, and tilt aberrations of typically 100nm RMS. We also identified the limitations of COFFEE for the reconstruction of low-order wavefront modes, which are highly filtered by the coronagraph. This is illustrated using two focal plane mask sizes on HiCAT. We discuss possible solutions, both in the hardware system and in the COFFEE optimizer, to mitigate these issues., Comment: 12 pages, 15 figures, Astronomy & Astrophysics

HR4796A hosts a well-studied debris disk with a long history due to its high fractional luminosity and favorable inclination lending itself well to both unresolved and resolved observations. We present new J- and K1-band images of the resolved debris disk HR4796A taken in the polarimetric mode of the Gemini Planet Imager (GPI). The polarized intensity features a strongly forward scattered brightness distribution and is undetected at the far side of the disk. The total intensity is detected at all scattering angles and also exhibits a strong forward scattering peak. We use a forward modelled geometric disk in order to extract geometric parameters, polarized fraction and total intensity scattering phase functions for these data as well as H-band data previously taken by GPI. We find the polarized phase function becomes increasingly more forward scattering as wavelength increases. We fit Mie and distribution of hollow spheres grain (DHS) models to the extracted functions. We find that while it is possible to describe generate a satisfactory model for the total intensity using a DHS model, but not with a Mie model. We find that no single grain population of DHS or Mie grains of arbitrary composition can simultaneously reproduce the polarized fraction and total intensity scattering phase functions, indicating the need for more sophisticated grain models., Comment: Accepted for publication in AJ. 3 tables, 11 figures

We report the results of a ${\sim}4$-year direct imaging survey of 104 stars to resolve and characterize circumstellar debris disks in scattered light as part of the Gemini Planet Imager Exoplanet Survey. We targeted nearby (${\lesssim}150$ pc), young (${\lesssim}500$ Myr) stars with high infrared excesses ($L_{\mathrm{IR}} / L_\star > 10^{-5}$), including 38 with previously resolved disks. Observations were made using the Gemini Planet Imager high-contrast integral field spectrograph in $H$-band (1.6 $\mu$m) coronagraphic polarimetry mode to measure both polarized and total intensities. We resolved 26 debris disks and three protoplanetary/transitional disks. Seven debris disks were resolved in scattered light for the first time, including newly presented HD 117214 and HD 156623, and we quantified basic morphologies of five of them using radiative transfer models. All of our detected debris disks but HD 156623 have dust-poor inner holes, and their scattered-light radii are generally larger than corresponding radii measured from resolved thermal emission and those inferred from spectral energy distributions. To assess sensitivity, we report contrasts and consider causes of non-detections. Detections were strongly correlated with high IR excess and high inclination, although polarimetry outperformed total intensity angular differential imaging for detecting low inclination disks (${\lesssim} 70 \deg$). Based on post-survey statistics, we improved upon our pre-survey target prioritization metric predicting polarimetric disk detectability. We also examined scattered-light disks in the contexts of gas, far-IR, and millimeter detections. Comparing $H$-band and ALMA fluxes for two disks revealed tentative evidence for differing grain properties. Finally, we found no preference for debris disks to be detected in scattered light if wide-separation substellar companions were present., Comment: arXiv resubmission with typographical corrections. Accepted for publication in AJ. 19 figures, 7 tables

We present new $H$-band scattered light images of the HD 32297 edge-on debris disk obtained with the Gemini Planet Imager (GPI). The disk is detected in total and polarized intensity down to a projected angular separation of 0.15", or 20au. On the other hand, the large scale swept-back halo remains undetected, likely a consequence of its markedly blue color relative to the parent body belt. We analyze the curvature of the disk spine and estimate a radius of $\approx$100au for the parent body belt, smaller than past scattered light studies but consistent with thermal emission maps of the system. We employ three different flux-preserving post-processing methods to suppress the residual starlight and evaluate the surface brightness and polarization profile along the disk spine. Unlike past studies of the system, our high fidelity images reveal the disk to be highly symmetric and devoid of morphological and surface brightness perturbations. We find the dust scattering properties of the system to be consistent with those observed in other debris disks, with the exception of HR 4796. Finally, we find no direct evidence for the presence of a planetary-mass object in the system., Comment: Accepted for publication in the Astronomical Journal

We present a study of the HD 165054 astrometric calibration field that has been periodically observed with the Gemini Planet Imager. HD 165054 is a bright star within Baade's Window, a region of the galactic plane with relatively low extinction from interstellar dust. HD 165054 was selected as a calibrator target due to the high number density of stars within this region ($\sim 3$ stars per square arcsecond with $H<22$), necessary because of the small field-of-view of the Gemini Planet Imager. Using nine epochs spanning over five years, we have fit a standard five-parameter astrometric model to the astrometry of seven background stars within close proximity to HD 165054 (angular separation $< 2$ arcsec). We achieved a proper motion precision of $\sim 0.3$ mas/yr, and constrained the parallax of each star to be $\lesssim 1$ mas. Our measured proper motions and parallax limits are consistent with the background stars being a part of the galactic bulge. Using these measurements we find no evidence of any systematic trend of either the plate scale or the north angle offset of GPI between 2014 and 2019. We compared our model describing the motions of the seven background stars to observations of the same field in 2014 and 2018 obtained with Keck/NIRC2, an instrument with an excellent astrometric calibration. We find that predicted position of the background sources is consistent with that measured by NIRC2, within the uncertainties of the calibration of the two instruments. In the future, we will use this field as a standard astrometric calibrator for the upgrade of GPI and potentially for other high-contrast imagers., Comment: 25 pages, 12 figures

We present the first polarimetric detection of the inner disk component around the pre-main sequence B9.5 star HD 141569A. Gemini Planet Imager H-band (1.65 micron) polarimetric differential imaging reveals the highest signal-to-noise ratio detection of this ring yet attained and traces structure inwards to 0.25" (28 AU at a distance of 111 pc). The radial polarized intensity image shows the east side of the disk, peaking in intensity at 0.40" (44 AU) and extending out to 0.9" (100 AU). There is a spiral arm-like enhancement to the south, reminiscent of the known spiral structures on the outer rings of the disk. The location of the spiral arm is coincident with 12CO J=3-2 emission detected by ALMA, and hints at a dynamically active inner circumstellar region. Our observations also show a portion of the middle dusty ring at ~220 AU known from previous observations of this system. We fit the polarized H-band emission with a continuum radiative transfer Mie model. Our best-fit model favors an optically thin disk with a minimum dust grain size close to the blow-out size for this system: evidence of on-going dust production in the inner reaches of the disk. The thermal emission from this model accounts for virtually all of the far-infrared and millimeter flux from the entire HD 141569A disk, in agreement with the lack of ALMA continuum and CO emission beyond ~100 AU. A remaining 8-30 micron thermal excess a factor of ~2 above our model argues for a yet-unresolved warm innermost 5-15 AU component of the disk., Comment: 16 pages, 8 figures, accepted at AJ

We present new observations of the planet beta Pictoris b from 2018 with GPI, the first GPI observations following conjunction. Based on these new measurements, we perform a joint orbit fit to the available relative astrometry from ground-based imaging, the Hipparcos Intermediate Astrometric Data (IAD), and the Gaia DR2 position, and demonstrate how to incorporate the IAD into direct imaging orbit fits. We find a mass consistent with predictions of hot-start evolutionary models and previous works following similar methods, though with larger uncertainties: 12.8 [+5.3, -3.2] M_Jup. Our eccentricity determination of 0.12 [+0.04, -0.03] disfavors circular orbits. We consider orbit fits to several different imaging datasets, and find generally similar posteriors on the mass for each combination of imaging data. Our analysis underscores the importance of performing joint fits to the absolute and relative astrometry simultaneously, given the strong covariance between orbital elements. Time of conjunction is well constrained within 2.8 days of 2017 September 13, with the star behind the planet's Hill sphere between 2017 April 11 and 2018 February 16 (+/- 18 days). Following the recent radial velocity detection of a second planet in the system, beta Pic c, we perform additional two-planet fits combining relative astrometry, absolute astrometry, and stellar radial velocities. These joint fits find a significantly smaller mass for the imaged planet beta Pic b, of 8.0 +/- 2.6 M_Jup, in a somewhat more circular orbit. We expect future ground-based observations to further constrain the visual orbit and mass of the planet in advance of the release of Gaia DR4., Comment: 29 Pages, 23 Figures. Accepted to AJ

We present the first spatially resolved scattered-light images of four debris disks around members of the Scorpius-Centaurus (Sco-Cen) OB Association with high-contrast imaging and polarimetry using the Gemini Planet Imager (GPI). All four disks are resolved for the first time in polarized light and one disk is also detected in total intensity. The three disks imaged around HD 111161, HD 143675, and HD 145560 are symmetric in both morphology and brightness distribution. The three systems span a range of inclinations and radial extents. The disk imaged around HD 98363 shows indications of asymmetries in morphology and brightness distribution, with some structural similarities to the HD 106906 planet-disk system. Uniquely, HD 98363 has a wide co-moving stellar companion Wray 15-788 with a recently resolved disk with very different morphological properties. HD 98363 A/B is the first binary debris disk system with two spatially resolved disks. All four targets have been observed with ALMA, and their continuum fluxes range from one non-detection to one of the brightest disks in the region. With the new results, a total of 15 A/F-stars in Sco-Cen have resolved scattered light debris disks, and approximately half of these systems exhibit some form of asymmetry. Combining the GPI disk structure results with information from the literature on millimeter fluxes and imaged planets reveals a diversity of disk properties in this young population. Overall, the four newly resolved disks contribute to the census of disk structures measured around A/F-stars at this important stage in the development of planetary systems., Comment: 20 pages, 9 figures

HiCAT is a high-contrast imaging testbed designed to provide complete solutions in wavefront sensing, control and starlight suppression with complex aperture telescopes. The pupil geometry of such observatories includes primary mirror segmentation, central obstruction, and spider vanes, which make the direct imaging of habitable worlds very challenging. The testbed alignment was completed in the summer of 2014, exceeding specifications with a total wavefront error of 12nm rms over a 18mm pupil. The installation of two deformable mirrors for wavefront control is to be completed in the winter of 2015. In this communication, we report on the first testbed results using a classical Lyot coronagraph. We also present the coronagraph design for HiCAT geometry, based on our recent development of Apodized Pupil Lyot Coronagraph (APLC) with shaped-pupil type optimizations. These new APLC-type solutions using two-dimensional shaped-pupil apodizer render the system quasi-insensitive to jitter and low-order aberrations, while improving the performance in terms of inner working angle, bandpass and contrast over a classical APLC., Comment: 12 pages, 10 figures, Proceedings of the SPIE, Volume 9605, id. 96050I 12 pp. (2015)

Future space-based coronagraphs will rely critically on focal-plane wavefront sensing and control with deformable mirrors to reach deep contrast by mitigating optical aberrations in the primary beam path. Until now, most focal-plane wavefront control algorithms have been formulated in terms of Jacobian matrices, which encode the predicted effect of each deformable mirror actuator on the focal-plane electric field. A disadvantage of these methods is that Jacobian matrices can be cumbersome to compute and manipulate, particularly when the number of deformable mirror actuators is large. Recently, we proposed a new class of focal-plane wavefront control algorithms that utilize gradient-based optimization with algorithmic differentiation to compute wavefront control solutions while avoiding the explicit computation and manipulation of Jacobian matrices entirely. In simulations using a coronagraph design for the proposed Large UV/Optical/Infrared Surveyor (LUVOIR), we showed that our approach reduces overall CPU time and memory consumption compared to a Jacobian-based algorithm. Here, we expand on these results by implementing the proposed algorithm on the High Contrast Imager for Complex Aperture Telescopes (HiCAT) testbed at the Space Telescope Science Institute (STScI) and present initial experimental results, demonstrating contrast suppression capabilities equivalent to Jacobian-based methods.

The $\sim500$\, Myr A2IV star HR 1645 has one of the most significant low-amplitude accelerations of nearby early-type stars measured from a comparison of the {\it Hipparcos} and {\it Gaia} astrometric catalogues. This signal is consistent with either a stellar companion with a moderate mass ratio ($q\sim0.5$) on a short period ($P<1$\,yr), or a substellar companion at a separation wide enough to be resolved with ground-based high contrast imaging instruments; long-period equal mass ratio stellar companions that are also consistent with the measured acceleration are excluded with previous imaging observations. The small but significant amplitude of the acceleration made HR 1645 a promising candidate for targeted searches for brown dwarf and planetary-mass companions around nearby, young stars. In this paper we explore the origin of the astrometric acceleration by modelling the signal induced by a wide-orbit M8 companion discovered with the Gemini Planet Imager, as well as the effects of an inner short-period spectroscopic companion discovered a century ago but not since followed-up. We present the first constraints on the orbit of the inner companion, and demonstrate that it is a plausible cause of the astrometric acceleration. This result demonstrates the importance of vetting of targets with measured astrometric acceleration for short-period stellar companions prior to conducting targeted direct imaging surveys for wide-orbit substellar companions., Comment: 14 pages, 9 figures. Accepted for publication in the Astronomical Journal

We present a revision to the visual orbit of the young, directly-imaged exoplanet 51 Eridani b using four years of observations with the Gemini Planet Imager. The relative astrometry is consistent with an eccentric ($e=0.53_{-0.13}^{+0.09}$) orbit at an intermediate inclination ($i=136_{-11}^{+10}$\,deg), although circular orbits cannot be excluded due to the complex shape of the multidimensional posterior distribution. We find a semi-major axis of $11.1_{-1.3}^{+4.2}$\,au and a period of $28.1_{-4.9}^{+17.2}$\,yr, assuming a mass of 1.75\,M$_{\odot}$ for the host star. We find consistent values with a recent analysis of VLT/SPHERE data covering a similar baseline. We investigated the potential of using absolute astrometry of the host star to obtain a dynamical mass constraint for the planet. The astrometric acceleration of 51~Eri derived from a comparison of the {\it Hipparcos} and {\it Gaia} catalogues was found to be inconsistent at the 2--3$\sigma$ level with the predicted reflex motion induced by the orbiting planet. Potential sources of this inconsistency include a combination of random and systematic errors between the two astrometric catalogs or the signature of an additional companion within the system interior to current detection limits. We also explored the potential of using {\it Gaia} astrometry alone for a dynamical mass measurement of the planet by simulating {\it Gaia} measurements of the motion of the photocenter of the system over the course of the extended eight-year mission. We find that such a measurement is only possible ($>98$\% probability) given the most optimistic predictions for the {\it Gaia} scan astrometric uncertainties for bright stars, and a high mass for the planet ($\gtrsim3.6$\,M$_{\rm Jup}$)., Comment: 17 pages, 11 figures. Accepted for publication in the Astronomical Journal

We present a revision to the astrometric calibration of the Gemini Planet Imager (GPI), an instrument designed to achieve the high contrast at small angular separations necessary to image substellar and planetary-mass companions around nearby, young stars. We identified several issues with the GPI Data Reduction Pipeline (DRP) that significantly affected the determination of angle of north in reduced GPI images. As well as introducing a small error in position angle measurements for targets observed at small zenith distances, this error led to a significant error in the previous astrometric calibration that has affected all subsequent astrometric measurements. We present a detailed description of these issues, and how they were corrected. We reduced GPI observations of calibration binaries taken periodically since the instrument was commissioned in 2014 using an updated version of the DRP. These measurements were compared to observations obtained with the NIRC2 instrument on Keck II, an instrument with an excellent astrometric calibration, allowing us to derive an updated plate scale and north offset angle for GPI. This revised astrometric calibration should be used to calibrate all measurements obtained with GPI for the purposes of precision astrometry., Comment: 36 pages, 17 figures, accepted for publication in the Journal of Astronomical Telescopes, Instruments, and Systems. Updated version includes revisions made during the referee process

An explanation for the origin of asymmetry along the preferential axis of the PSF of an AO system is developed. When phase errors from high altitude turbulence scintillate due to Fresnel propagation, wavefront amplitude errors may be spatially offset from residual phase errors. These correlated errors appear as asymmetry in the image plane under the Fraunhofer condition. In an analytic model with an open-loop AO system, the strength of the asymmetry is calculated for a single mode of phase aberration, which generalizes to two dimensions under a Fourier decomposition of the complex illumination. Other parameters included are the spatial offset of the AO correction, which is the wind velocity in the frozen flow regime multiplied by the effective AO time delay, and propagation distance or altitude of the turbulent layer. In this model, the asymmetry is strongest when the wind is slow and nearest to the coronagraphic mask when the turbulent layer is far away, such as when the telescope is pointing low towards the horizon. A great emphasis is made about the fact that the brighter asymmetric lobe of the PSF points in the opposite direction as the wind, which is consistent analytically with the clarification that the image plane electric field distribution is actually the inverse Fourier transform of the aperture plane. Validation of this understanding is made with observations taken from the Gemini Planet Imager, as well as being reproducible in end-to-end AO simulations., Comment: 28 Pages, 13 Figures, Accepted to JATIS

Direct imaging of exo-Earths and search for life is one of the most exciting and challenging objectives for future space observatories. Segmented apertures in space will be required to reach the needed large diameters beyond the capabilities of current or planned launch vehicles. These apertures present additional challenges for high-contrast coronagraphy, not only in terms of static phasing but also in terms of their stability. The Pair-based Analytical model for Segmented Telescope Imaging from Space (PASTIS) was developed to model the effects of segment-level optical aberrations on the final image contrast. In this paper, we extend the original PASTIS propagation model from a purely analytical to a semi-analytical method, in which we substitute the use of analytical images with numerically simulated images. The inversion of this model yields a set of orthonormal modes that can be used to determine segment-level wavefront tolerances. We present results in the case of segment-level piston error applied to the baseline coronagraph design of LUVOIR A, with minimum and maximum wavefront error constraint between 56 pm and 290 pm per segment. The analysis is readily generalizable to other segment-level aberrations modes, and can also be expanded to establish stability tolerances for these missions., Comment: 15 pages, 10 figures; published

The Wide Field Infrared Survey Telescope (WFIRST) Coronagraph Instrument (CGI) will be the first high-performance stellar coronagraph using active wavefront control for deep starlight suppression in space, providing unprecedented levels of contrast, spatial resolution, and sensitivity for astronomical observations in the optical. One science case enabled by the CGI will be taking images and(R~50)spectra of faint interplanetary dust structures present in the habitable zone of nearby sunlike stars (~10 pc) and within the snow-line of more distant ones(~20pc), down to dust density levels commensurate with that of the solar system zodiacal cloud. Reaching contrast levels below~10-7 for the first time, CGI will cross an important threshold in debris disks physics, accessing disks with low enough optical depths that their structure is dominated by transport phenomena than collisions. Hence, CGI results will be crucial for determining how exozodiacal dust grains are produced and transported in low-density disks around mature stars. Additionally, CGI will be able to measure the brightness level and constrain the degree of asymmetry of exozodiacal clouds around individual nearby sunlike stars in the optical, at the ~10x solar zodiacal emission level. This information will be extremely valuable for optimizing the observational strategy of possible future exo-Earth direct imaging missions, especially those planning to operate at optical wavelengths, such as Habitable Exoplanet Observatory (HabEx) and the Large Ultraviolet/Optical/Infrared Surveyor (LUVOIR)., Comment: 6 pages, 2 figures

We have obtained Hubble Space Telescope STIS and NICMOS, and Gemini/GPI scattered light images of the HD 191089 debris disk. We identify two spatial components: a ring resembling Kuiper Belt in radial extent (FWHM: ${\sim}$25 au, centered at ${\sim}$46 au), and a halo extending to ${\sim}$640 au. We find that the halo is significantly bluer than the ring, consistent with the scenario that the ring serves as the "birth ring" for the smaller dust in the halo. We measure the scattering phase functions in the 30{\deg}-150{\deg} scattering angle range and find the halo dust is both more forward- and backward-scattering than the ring dust. We measure a surface density power law index of -0.68${\pm}$0.04 for the halo, which indicates the slow-down of the radial outward motion of the dust. Using radiative transfer modeling, we attempt to simultaneously reproduce the (visible) total and (near-infrared) polarized intensity images of the birth ring. Our modeling leads to mutually inconsistent results, indicating that more complex models, such as the inclusion of more realistic aggregate particles, are needed., Comment: 29 pages, 18 figures, ApJ accepted