Search

As a biorefinery platform host, Escherichia coli has been used extensively to produce metabolites of commercial interest. Integration of foreign DNA onto the bacterial genome allows for stable expression overcoming the need for plasmid expression and its associated instability. Despite the development of numerous tools and genome editing technologies, the question of where to incorporate a synthetic pathway remains unanswered. To address this issue, we studied the genomic expression in E. coli and linked it not only to 26 rationally selected genomic locations, but also to the gene direction in relation to the DNA replication fork, to the carbon and nitrogen source, to DNA folding and supercoiling, and to metabolic burden. To enable these experiments, we have designed a fluorescent expression cassette to eliminate specific local effects on gene expression. Overall it can be concluded that although the expression range obtained by changing the genomic location of a pathway is small compared to the range typically seen in promoter-RBS libraries, the effect of culture medium, environmental stress and metabolic burden can be substantial. The characterization of multiple effects on genomic expression, and the associated libraries of well-characterized strains, will only stimulate and improve the creation of stable production hosts fit for industrial settings.

Biodegradable and biobased surface active agents are renewable and environmentally friendly alternatives to petroleum derived or oleochemical surfactants. However, they are accompanied by relatively high production costs. In this study, the aim was to reduce the production costs for an innovative type of microbial biosurfactant: bolaform sophorolipids, produced by the yeast Starmerella bombicola ΔsbleΔat. A novel continuous retentostat set-up was performed whereby continuous broth microfiltration retained the biomass in the bioreactor while performing an in situ product separation of bolaform sophorolipids. Although a mean volumetric productivity of 0.56 g L^(−1) h^(−1) was achieved, it was not possible to maintain this productivity, which collapsed to almost 0 g L^(−1) h^(−1). Therefore, two process adaptations were evaluated, a sequential batch strategy and a phosphate limitation alleviation strategy. The sequential batch set-up restored the mean volumetric productivity to 0.66 g L^(−1) h^(−1) for an additional 132 h but was again followed by a productivity decline. A similar result was obtained with the phosphate limitation alleviation strategy where a mean volumetric productivity of 0.54 g L^(−1) h^(−1) was reached, but a productivity decline was also observed. Whole genome variant analysis uncovered no evidence for genomic variations for up to 1306 h of retentostat cultivation. Untargeted metabolomics analysis identified 8-hydroxyguanosine, a biomarker for oxidative RNA damage, as a key metabolite correlating with high bolaform sophorolipid productivity. This study showcases the application of a retentostat to increase bolaform sophorolipid productivity and lays the basis of a multi-omics platform for in depth investigation of microbial biosurfactant production with S. bombicola.

Agro and food industries generate various side- and waste streams that, in addition to being an economic loss, also contribute to the emission of greenhouse gases and to a substantial waste of resources. Apart from offering solutions for the issues above, microbial conversion of food waste to value-added products like microbial biosurfactants will reduce the carbon footprint and price of these products, as it replaces first-generation substrates that are the main contributors to cost and impact. In order to achieve this goal, strain- and process engineering has been applied to enable the use of different waste streams as feedstock for the yeast Starmerella bombicola. S. bombicola is a natural producer of sophorolipids, a class of glycolipid biosurfactants consisting of a hydrophilic sophorose group attached to a hydrophobic fatty acid tail. Within this research, in the framework of the European BBI-JU funded WASTE2FUNC project and the FWO SB scholarship of ir. T. Van de Craen, the focus lays on various new-to-nature biosurfactants produced by modified S. bombicola strains. These novel biosurfactants are similar to sophorolipids but contain other functionalities that help to further broaden the application range of glycolipid biosurfactants . Physical and enzymatic pretreatment methods for the waste streams as well as genetic engineering towards achieving higher productivities of these new-to-nature biosurfactants are investigated. The final goal is to develop scalable, economic and sustainable production processes for novel glycolipid biosurfactants.

When developing industrial biotechnology processes, Saccharomyces cerevisiae (baker's yeast or brewer's yeast) is a popular choice as a microbial host. Many tools have been developed in the fields of synthetic biology and metabolic engineering to introduce heterologous pathways and tune their expression in yeast. Such tools mainly focus on controlling transcription, whereas post-transcriptional regulation is often overlooked. Herein we discuss regulatory elements found in the 5' untranslated region (UTR) and their influence on protein synthesis. We provide not only an overall picture, but also a set of design rules on how to engineer a 5' UTR. The reader is also referred to currently available models that allow gene expression to be tuned predictably using different 5' UTRs.

The marine environment is an excellent resource for natural products with therapeutic potential. Its microbial inhabitants, often associated with other marine organisms, are specialized in the synthesis of bioactive secondary metabolites. Similar to their terrestrial counterparts, marine Actinobacteria are a prevalent source of these natural products. Here, we discuss 77 newly discovered alkaloids produced by such marine Actinobacteria between 2017 and mid-2021, as well as the strategies employed in their elucidation. While 12 different classes of alkaloids were unraveled, indoles, diketopiperazines, glutarimides, indolizidines, and pyrroles were most dominant. Discoveries were mainly based on experimental approaches where microbial extracts were analyzed in relation to novel compounds. Although such experimental procedures have proven useful in the past, the methodologies need adaptations to limit the chance of compound rediscovery. On the other hand, genome mining provides a different angle for natural product discovery. While the technology is still relatively young compared to experimental screening, significant improvement has been made in recent years. Together with synthetic biology tools, both genome mining and extract screening provide excellent opportunities for continued drug discovery from marine Actinobacteria.

The yeast Starmerella bombicola distinguishes itself from other yeasts by its potential of producing copious amounts of the secondary metabolites sophorolipids (SLs): these are glycolipid biosurfactants composed out of a(n) (acetylated) sophorose moiety and a lipid tail. Although SLs are the subject of numerous research papers and have been commercialized, e.g., in eco-friendly cleaning solutions, the natural function of SLs still remains elusive. This research article investigates several hypotheses for why S. bombicola invests that much energy in the production of SLs, and we conclude that the main natural function of SLs in S. bombicola is niche protection: (1) the extracellular storage of an energy-rich, yet metabolically less accessible carbon source that can be utilized by S. bombicola upon conditions of starvation with (2) antimicrobial properties. In this way, S. bombicola creates a dual advantage in competition with other microorganisms. Additionally, SLs can expedite growth on rapeseed oil, composed of triacylglycerols which are hydrophobic substrates present in the yeasts’ environment, for a non-SL producing strain (Δcyp52M1). It was also found that—at least under lab conditions—SLs do not provide protection against high osmotic pressure prevalent in sugar-rich environments such as honey or nectar present in the natural habitat of S. bombicola.

Sophorolipids are biobased compounds produced by the genera Starmerella and Pseudohyphozyma that gain exponential interest from academic and industrial stakeholders due to their mild and environmental friendly characteristics. Currently, industrially relevant sophorolipid volumetric productivities are reached up to 3.7 g center dot L-1 center dot h(-1) and sophorolipids are used in the personal care and cleaning industry at small scale. Moreover, applications in crop protection, food, biohydrometallurgy and medical fields are being extensively researched. The research and development of sophorolipids is at a crucial stage. Therefore, this work presents an overview of the state-of-the-art on sophorolipid research and their applications, while providing a critical assessment of scientific techniques and standardisation in reporting. In this review, the genuine sophorolipid producing organisms and the natural role of sophorolipids are discussed. Subsequently, an evaluation is made of innovations in production processes and the relevance of in-situ product recovery for process performance is discussed. Furthermore, a critical assessment of application research and its future perspectives are portrayed with a focus on the self-assembly of sophorolipid molecules. Following, genetic engineering strategies that affect the sophorolipid physiochemical properties are summarised. Finally, the impact of sophorolipids on the bioeconomy are uncovered, along with relevant future perspectives.

Resistance of pathogenic microorganisms against antimicrobials is a major threat to contemporary human society. It necessitates a perpetual influx of novel antimicrobial compounds. More specifically, Gram− pathogens emerged as the most exigent danger. In our continuing quest to search for novel antimicrobial molecules, alkaloids from marine fungi show great promise. However, current reports of such newly discovered alkaloids are often limited to cytotoxicity studies and, moreover, neglect to discuss the enigma of their biosynthesis. Yet, the latter is often a prerequisite to make them available through sufficiently efficient processes. This review aims to summarize novel alkaloids with promising antimicrobial properties discovered in the past five years and produced by marine fungi. Several discovery strategies are summarized, and knowledge gaps in biochemical production routes are identified. Finally, links between the structure of the newly discovered molecules and their activity are proposed. Since 2015, a total of 35 new antimicrobial alkaloids from marine fungi were identified, of which 22 showed an antibacterial activity against Gram− microorganisms. Eight of them can be classified as narrow-spectrum Gram− antibiotics. Despite this promising ratio of novel alkaloids active against Gram− microorganisms, the number of newly discovered antimicrobial alkaloids is low, due to the narrow spectrum of discovery protocols that are used and the fact that antimicrobial properties of newly discovered alkaloids are barely characterized. Alternatives are proposed in this review. In conclusion, this review summarizes novel findings on antimicrobial alkaloids from marine fungi, shows their potential as promising therapeutic candidates, and hints on how to further improve this potential.

Starmerella bombicola very efficiently produces the secondary metabolites sophorolipids (SLs). Their biosynthesis is not-growth associated and highly upregulated in the stationary phase. Despite high industrial and academic interest, the underlying regulation of SL biosynthesis remains unknown. In this paper, potential regulation of SL biosynthesis through the telomere positioning effect (TPE) was investigated, as the SL gene cluster is located adjacent to a telomere. An additional copy of this gene cluster was introduced elsewhere in the genome to investigate if this results in a decoy of regulation. Indeed, for the new strain, the onset of SL production was shifted to the exponential phase. This result was confirmed by RT-qPCR analysis. The TPE effect was further investigated by developing and applying a suitable reporter system for this non-conventional yeast, enabling non-biased comparison of gene expression between the subtelomeric CYP52M1- and the URA3 locus. This was done with a constitutive endogenous promotor (pGAPD) and one of the endogenous promotors of the SL biosynthetic gene cluster (pCYP52M1). A clear positioning effect was observed for both promotors with significantly higher GFP expression levels at the URA3 locus. No clear GFP upregulation was observed in the stationary phase for any of the new strains.

Fine-tuning biosynthetic pathways is crucial for the development of economic feasible microbial cell factories. Therefore, the use of computational models able to predictably design regulatory sequences for pathway engineering proves to be a valuable tool, especially for modifying genes at the translational level. In this study we developed a computational approach for the de novo design of 5'-untranslated regions (5'UTRs) in Saccharomyces cerevisiae with a predictive outcome on translation initiation rate. On the basis of existing data, a partial least-squares (PLS) regression model was trained and showed good performance on predicting protein abundances of an independent test set. This model was further used for the construction of a "yUTR calculator" that can design 5'UTR sequences with a diverse range of desired translation efficiencies. The predictive power of our yUTR calculator was confirmed in vivo by different representative case studies. As such, these results show the great potential of data driven approaches for reliable pathway engineering in S. cerevisiae.

As flavonoids have beneficial health effects on humans, they are gaining increasing interest from pharmaceutical and health industries. However, current production methods, such as plant extraction and chemical synthesis, are inadequate to meet the demand. Therefore, microbial production might offer a promising alternative. During recent years, microbial strains able to produce flavonoids to a certain extent have been developed. However production titers are limited to the mg l−1 range, hampering the industrial exploitation of these strains. The latter will not be achieved by simply introducing the heterologous pathway in the production host and optimizing the fermentation process, but will depend on the interaction of different aspects of metabolic engineering and process engineering to overcome the current limitations. Next to engineering the production strain to optimize the availability of precursors, the pathway itself also requires intensive engineering. Currently utilized strategies result in a wide variety of different production strains, requiring high-throughput screening methods to identify optimal performing strains. As more and more organisms are being characterized, each with their own specific properties which might be beneficial for the heterologous production of flavonoids, the choice of the production host is another important aspect. Finally, the use of co-cultures might offer an alternative in which different parts of the process are performed by different organisms. This review aims to provide an overview of the research that has been done on these separate aspects. The work presented here could be used as a framework for further research.

Glucolipids (GLs) are glycolipid biosurfactants with promising properties. These GLs are composed of glucose attached to a hydroxy fatty acid through a omega and/or omega-1 glycosidic linkage. Up until today these interesting molecules could only be produced using an engineered Starmerella bombicola strain ( increment ugtB1::URA3 G9) producing GLs instead of sophorolipids, albeit with a very low average productivity (0.01 g center dot L-1 center dot h(-1)). In this study, we investigated the reason(s) for this via reverse-transcription quantitative polymerase chain reaction and Liquid chromatography-multireaction monitoring-mass spectrometry. We found that all glycolipid biosynthetic genes and enzymes were downregulated in the increment ugtB1 G9 strain in comparison to the wild type. The underlying reason for this downregulation was further investigated by performing quantitative metabolome comparison of the increment ugtB1 G9 strain with the wild type and two other engineered strains also tinkered in their glycolipid biosynthetic gene cluster. This analysis revealed a clear distortion of the entire metabolism of the increment ugtB1 G9 strain compared to all the other strains. Because the parental strain of the former was a spontaneous increment ura3 mutant potentially containing other "hidden" mutations, a new GL production strain was generated based on a rationally engineered increment ura3 mutant (PT36). Indeed, a 50-fold GL productivity increase (0.51 g center dot L-1 center dot h(-1)) was obtained with the new increment ugtB1::URA3 PT36 strain compared with the G9-based strain (0.01 g center dot L-1 center dot h(-1)) in a 10 L bioreactor experiment, yielding 118 g/L GLs instead of 8.39 g/L. Purification was investigated and basic properties of the purified GLs were determined. This study forms the base for further development and optimization of S. bombicola as a production platform strain for (new) biochemicals

To decrease our dependency for the diminishing source of fossils resources, bio-based alternatives are being explored for the synthesis of commodity and high-value molecules. One example in this ecological initiative is the microbial production of the biosurfactant sophorolipids by the yeast Starmerella bombicola. Sophorolipids are surface-active molecules mainly used as household and laundry detergents. Because S. bombicola is able to produce high titers of sophorolipids, the yeast is also used to increase the portfolio of lipophilic compounds through strain engineering. Here, the one-step microbial production of hydroxy fatty acids by S. bombicola was accomplished by the selective blockage of three catabolic pathways through metabolic engineering. Successful production of 17.39 g/l (ω-1) linked hydroxy fatty acids was obtained by the successive blockage of the sophorolipid biosynthesis, the β-oxidation and the ω-oxidation pathways. Minor contamination of dicarboxylic acids and fatty aldehydes were successfully removed using flash chromatography. This way, S. bombicola was further expanded into a flexible production platform of economical relevant compounds in the chemical, food and cosmetic industries.

Altering gene expression regulation by promoter engineering is a very effective way to fine-tune heterologous pathways in eukaryotic hosts. Typically, pathway building approaches in yeast still use a limited set of long, native promoters. With the today’s introduction of longer and more complex pathways, an expansion of this synthetic biology toolbox is necessary. In this study we elucidated the core promoter structure of the well-characterized yeast TEF1 promoter and determined the minimal length needed for sufficient protein expression. Furthermore, this minimal core promoter sequence was used for the creation of a promoter library covering different expression strengths. This resulted in a group of short, 69 bp promoters with an 8.0-fold expression range. One exemplar had a two and four times higher expression compared to the native CYC1 and ADH1 promoter, respectively. Additionally, as it was described that the protein expression range could be broadened by upstream activating sequences (UASs), we integrated earlier described single and multiple short, synthetic UASs in front of the strongest yeast core promoter. This approach resulted to further variation in protein expression and an overall promoter library spanning a 20-fold activity range and covering a length from 69 bp to maximally 129 bp. Furthermore, the robustness of this library was assessed on three alternative carbon sources besides glucose. As such, the suitability of short yeast core promoters for metabolic engineering applications on different media, either in an individual context or combined with UAS elements, was demonstrated.

Sophorolipids are one of the best known microbial biosurfactants and are produced by several yeast species. The best studied producer is Starmerella bombicola, a non-pathogenic yeast associated in nature with bumblebees. Sophorolipids are built up of the rare disaccharide sophorose, which is attached to a fatty acid through a glyosidic bound. Sophorolipids produced by S. bombicola mainly contain oleic acid as the incorporated hydrophobic group. Other chain lengths can, to a certain content, be incorporated by feeding the yeast with substrates of alternative chain lengths. However, the efficiency for such substrates is low as compared to the preferred C18 chain length and defined by the substrate specificity of the first enzymatic step in sophorolipid biosynthesis, i.e., the cytochrome P450 enzyme CYP52M1. To increase product uniformity and diversity at the same time, a new strain of S. bombicola was developed that produces sophorolipids with a palmitic acid acyl chain. This was achieved by heterologous expression of the cytochrome P450 cyp1 gene of Ustilago maydis and feeding with palmitic acid. Optimization of the production was done by protein and process engineering.

In this review, we focus on one of the most important microbial producers of biosurfactants, Starmerella bombicola. Emphasis is laid on the discovery, taxonomy, habitat, cellular characteristics, biochemistry and genetics of this non-pathogenic yeast. Biosurfactants are natural surface-active compounds produced by several types of microorganisms and have been considered an interesting alternative to synthetic surfactants. The sophorolipids produced by S. bombicola are promising biosurfactants, with application potential in food, pharmaceutical, cosmetic and cleaning industries. The fundamental knowledge described in this review is of crucial interest to optimize production of these promising compounds. Furthermore, it can be translated to produce novel non-native bioactive molecules with S. bombicola, and to deepen fundamental knowledge on other non-conventional yeast species and in the end to broaden their application potential as well.

Chromosomal integration of biosynthetic pathways for the biotechnological production of high-value chemicals is a necessity to develop industrial strains with a high long-term stability and a low production variability. However, the introduction of multiple transcription units into the microbial genome remains a difficult task. Despite recent advances, current methodologies are either laborious or efficiencies highly fluctuate depending on the length and the type of the construct. Here we present serine integrase recombinational engineering (SIRE), a novel methodology which combines the ease of recombinase-mediated cassette exchange (RMCE) with the selectivity of orthogonal att sites of the PhiC31 integrase. As a proof of concept, this toolbox is developed for Escherichia coli. Using SIRE we were able to introduce a 10.3 kb biosynthetic gene cluster on different locations throughout the genome with an efficiency of 100% for the integrating step and without the need for selection markers on the knock-in cassette. Next to integrating large fragments, the option for multitargeting, for deleting operons, as well as for performing in vivo assemblies further expand and proof the versatility of the SIRE toolbox for E. coli. Finally, the serine integrase PhiC31 was also applied in the yeast Saccharomyces cerevisiae as a marker recovery tool, indicating the potential and portability of this toolbox.

In this chapter, a step-by-step approach on how to transform non-conventional yeasts or fungi into platform organisms is described. The non-conventional glycolipid producing yeast Starmerella bombicola (and in some cases also Pseudohyphozyma bogoriensis) is used as a case study. And more specifically how to engineer it toward production of new-to-nature glycolipids like bola sophorolipids. When starting genetic engineering efforts for non-lab strains, one should start at the very basis: identifying selection markers and possibly developing auxotrophic strains. Once this is done, the quest for the development of an optimal transformation method can be started. After optimization thereof, knock-out and knock-in strains can be generated based upon the specific strategy/aim. Sometimes this can lead to unexpected, but yet very interesting findings. To fully and efficiently expand the potential as a production platform of these yeast strains, a range of additional molecular tools are required. A well-equipped molecular toolbox should contain a set of characterized promotors, terminators, and defined genomic landing paths. The availability of an episomal system greatly facilitates engineering and screening efforts, but also offers the possibility of developing more advanced engineering techniques such as Crispr-Cas. InBio.be is a world leading pioneer to do this for the yeast S. bombicola and combined, these efforts will result in the commercialization of new types of glycolipids in the next few years.

Although sophorolipids (SLs) produced by S. bombicola are a real showcase for the industrialization of microbial biosurfactants, some important drawbacks are associated with this efficient biological process, e.g., the simultaneous production of acidic and lactonic SLs. Depending on the application, there is a requirement for the naturally produced mixture to be manipulated to give defined ratios of the components. Recently, the enzyme responsible for the lactonization of SLs was discovered. The discovery of the gene encoding this lactone esterase (sble) enabled the development of promising S. bombicola strains producing either solely lactonic (using a sble overexpression strain described in this paper: oe sble) or solely acidic SLs (using a sble deletion strain, which was recently described, but not characterized yet: Δsble). The new S. bombicola strains were used to investigate the production processes (fermentation and purification) of either lactonic or acidic SLs. The strains maintain the high inherent productivities of the wild-type or even perform slightly better and thus represent a realistic industrial opportunity. 100% acidic SLs with a mixed acetylation pattern were obtained for the Δsble strain, while the inherent capacity to selectively produce lactonic SLs was significantly increased (+42%) for the oe sble strain (99% lactonic SLs). Moreover, the regulatory effect of citrate on lactone SL formation for the wild-type was absent in this new strain, which indicates that it is more robust and better suited for the industrial production of lactonic SLs. Basic parameters were determined for the purified SLs, which confirm that the two new strains produce molecules with distinctive properties of which the application potential can now easily be investigated independently.

Leaping DNA read-and-write technologies, and extensive automation and miniaturization are radically transforming the field of biological experimentation by providing the tools that enable the cost-effective high-throughput required to address the enormous complexity of biological systems. However, standardization of the synthetic biology workflow has not kept abreast with dwindling technical and resource constraints, leading, for example, to the collection of multi-level and multi-omics large data sets that end up disconnected or remain under- or even unexploited.In this contribution, we critically evaluate the various efforts, and the (limited) success thereof, in order to introduce standards for defining, designing, assembling, characterizing, and sharing synthetic biology parts. The causes for this success or the lack thereof, as well as possible solutions to overcome these, are discussed.Akin to other engineering disciplines, extensive standardization will undoubtedly speed-up and reduce the cost of bioprocess development. In this respect, further implementation of synthetic biology standards will be crucial for the field in order to redeem its promise, i.e. to enable predictable forward engineering.

Biosurfactants (BSs) are a class of secondary metabolites representing a wide variety of structures that can be produced from renewable feedstock by a wide variety of micro-organisms. They have (potential) applications in the medical world, personal care sector, mining processes, food industry, cosmetics, crop protection, pharmaceuticals, bio-remediation, household detergents, paper and pulp industry, textiles, paint industries, etc. Especially glycolipid BSs like sophorolipids (SLs), rhamnolipids (RLs), mannosylerythritol lipids (MELs) and cellobioselipids (CBLs) have been described to provide significant opportunities to (partially) replace chemical surfactants. The major two factors currently limiting the penetration of BSs into the market are firstly the limited structural variety and secondly the rather high production price linked with the productivity. One of the keys to resolve the above mentioned bottlenecks can be found in the genetic engineering of natural producers. This could not only result in more efficient (economical) recombinant producers, but also in a diversification of the spectrum of available BSs as such resolving both limiting factors at once. Unraveling the genetics behind the biosynthesis of these interesting biological compounds is indispensable for the tinkering, fine tuning and rearrangement of these biological pathways with the aim of obtaining higher yields and a more extensive structural variety. Therefore, this review focuses on recent developments in the investigation of the biosynthesis, genetics and regulation of some important members of the family of the eukaryotic glycolipid BSs (MELs, CBLs and SLs). Moreover, recent biotechnological achievements and the industrial potential of engineered strains are discussed.

In natural 1,3-propanediol (PDO) producing microorganisms such as Klebsiella pneumoniae, Citrobacter freundii and Clostridium sp., the genes coding for PDO producing enzymes are grouped in a dha cluster. This article describes the dha cluster of a novel candidate for PDO production, Citrobacter werkmanii DSM17579 and compares the cluster to the currently known PDO clusters of Enterobacteriaceae and Clostridiaceae. Moreover, we attribute a putative function to two previously unannotated ORFs, OrfW and OrfY, both in C. freundii and in C. werkmanii: both proteins might form a complex and support the glycerol dehydratase by converting cob(I)alamin to the glycerol dehydratase cofactor coenzyme B12. Unraveling this biosynthesis cluster revealed high homology between the deduced amino acid sequence of the open reading frames of C. werkmanii DSM17579 and those of C. freundii DSM30040 and K. pneumoniae MGH78578, i.e., 96 and 87.5 % identity, respectively. On the other hand, major differences between the clusters have also been discovered. For example, only one dihydroxyacetone kinase (DHAK) is present in the dha cluster of C. werkmanii DSM17579, while two DHAK enzymes are present in the cluster of K. pneumoniae MGH78578 and Clostridium butyricum VPI1718.

WOS: 000368884500001, PubMed ID: 26822953, Background: Imbalance in cofactors causing the accumulation of intermediates in biosynthesis pathways is a frequently occurring problem in metabolic engineering when optimizing a production pathway in a microorganism. In our previous study, a single knock-out Citrobacter werkmanii Delta dhaD was constructed for improved 1,3-propanediol (PDO) production. Instead of an enhanced PDO concentration on this strain, the gene knock-out led to the accumulation of the toxic intermediate 3-hydroxypropionaldehyde (3-HPA). The hypothesis was emerged that the accumulation of this toxic intermediate, 3-HPA, is due to a cofactor imbalance, i.e. to the limited supply of reducing equivalents (NADH). Here, this bottleneck is alleviated by rationally engineering cell metabolism to balance the cofactor supply. Results: By eliminating non-essential NADH consuming enzymes (such as lactate dehydrogenase coded by ldhA, and ethanol dehydrogenase coded by adhE) or by increasing NADH producing enzymes, the accumulation of 3-HPA is minimized. Combining the above modifications in C. werkmanii Delta dhaD resulted in the strain C. werkmanii Delta dhaD Delta ldhA.adhE, Promotion of Innovation through Science and Technology in Flanders (IWT-Vlaanderen)Institute for the Promotion of Innovation by Science and Technology in Flanders (IWT) [B/14045/07]; Multidisciplinary Research Partnership Ghent Bio-Economy, The authors wish to thank the Institute for the Promotion of Innovation through Science and Technology in Flanders (IWT-Vlaanderen) for financial support in the framework of the PhD grant (B/14045/07) of Maervoet V. The research was also supported by the Multidisciplinary Research Partnership Ghent Bio-Economy. The authors wish to thank dr. Ajikumar Parayil for valuable comments on and edits to the manuscript which was improved by his helpful suggestions.

1,3-Propanediol (PDO) is the starting point of a new-generation polymer with superior properties which is used in the textile and carpet industry. This product is mainly produced chemically, but high pressure, high temperature and expensive catalysts are required and toxic intermediates are released. Therefore, the biological production route has been studied intensively. DuPont and Genencor International, Inc. have modified Escherichia coli genetically so that this organism could produce PDO from glucose. However, due to the tremendous growth of the biofuel industry, a glycerol surplus has been created, so more and more researchers started to investigate the natural producing strains for the production of PDO from glycerol. Several metabolic engineering techniques have been used to enhance the production of PDO. This contribution gives an overview of the different strategies to increase the final titer, yield, and productivity of 1,3-propanediol in non-natural and natural producing strains.

The glyceraldehyde-3-phosphate dehydrogenase gene (GPD) of the sophorolipid producing yeast Candida bombicola was isolated using degenerated PCR and genome walking. The obtained 3,740 bp contain the 1,008 bases of the coding sequence and 1,613 and 783 bp of the upstream and downstream regions, respectively. The corresponding protein shows high homology to the other known GPD genes and is 74% identical to the gyceraldehyde-3-phosphate dehydrogenase of Yarrowia lipolytica. The particular interest in the C. bombicola GPD gene sequence originates from the potential use of its promoter for high and constitutive expression of homologous and heterologous genes. Southern blot analysis did not give any indication for the presence of multiple GPD genes and it can therefore be expected that the promoter can be used for efficient and high expression. This hypothesis was further confirmed by the biased codon usage in the GPD gene. GDP promoter fragments of different lengths were used to construct hygromycin resistance cassettes. The constructs were used for the transformation of C. bombicola and all of them, even the ones with only 190 bp of the GPD promoter, were able to render the cells resistant to hygromycin. The efficacy of a short GPD promoter can be a convenient characteristic for the construction of compact expression cassettes or vectors for C. bombicola. The GenBank accession number of the sequence described in this article is EU315245.

At our laboratory, research has focused on the development of Myrothecium gramineum as a novel expression host. The glyceraldehyde-3-phosphate dehydrogenase (gpd)-promoter of M. gramineum was isolated and characterized (Genbank accession number EF486690). In order to prove its functionality and to explore the potential of M. gramineum as a novel fungal expression host, use of this gpd-promoter for the expression of a fungal α-amylase was investigated. Myrothecium gramineum was transformed with pGPDlpAmyAO, containing the gpd-promoter followed by the amy3 encoding sequence of Aspergillus oryzae. Study of the amylase production indicated that the promoter can be successfully used for the expression of heterologous proteins in M. gramineum. To the best of our knowledge, this is the first time a homologous expression system has been described for M. gramineum.

A 2918 bp sequence coding for the orotidine-5'-monophosphate decarboxylase enzyme (OMPD) was isolated from the genome of Myrothecium gramineum. This sequence was analysed and, remarkably, it is the first OMPD gene of a Sordariomycete that has an intron. The gene codes for an enzyme of 282 amino acids. The nucleotide sequence and the amino acid sequence were compared with fungal OMPD sequences. They show the highest similarity to OMPD genes and enzymes of Aspergillus sp., Penicillium sp. and Cladosporium fulvum. The functionality of the gene as a selection marker was proven by complementation of the uracil auxotrophy of Aspergillus nidulans FGSC A722.

Summary The aim of this study was to assess the potential of lactic acid bacteria to inhibit the outgrowth of some common food-spoiling fungi. Culture supernatants of 17 lactic acid bacterial strains as well as of three commercial probiotic cultures were evaluated for antifungal activity using an agar-diffusion method. The method parameters were chosen in order to reveal compounds for potential use in food (bio)preservation. Thirteen strains showed antifungal activity of which five strains were very promising: Lactobacillus acidophilus LMG 9433, L. amylovorus DSM 20532, L. brevis LMG 6906, L. coryniformis subsp. coryniformis LMG 9196 and L. plantarum LMG 6907. Four of these five strains were further examined; it was found that the produced antifungal metabolites were pH-dependent. The exact chemical nature of these substances has not been revealed yet.

The yeast Candida bombicola is capable of producing high amounts (400g/L) of the biosurfactant sophorolipids. The genetic makeup of this industrially im- portant yeast has recently been uncovered and molecular manipulation techniques have been developed. Hence, all tools for the development of new bioprocesses with C. bombicola are now available. As a proof of concept, the production of two totally different molecules was aimed for: the bioplastic polyhydroxyalkanoate (PHA) and a new-to- nature cellobioselipid-biosurfactant. Integration of the new functionalities at genomic loci necessary for sophorolipid production safeguards the new biomolecules from sophor- olipid contamination, while taking advantage of the regula- tion of the sophorolipid gene cluster. A maximum yield of 2.0%wt/dwt PHA was obtained; furthermore, this is the first time cellobioselipid synthesis by a non-natural producer is reported. We here provided proof of concept that C. bombicola can be transformed into a platform organism for the production of tailor-made biomolecules. Biotechnol. Bioeng. 2013;110: 2494-2503.

Sophorolipids are surface-active compounds synthesized by the non-pathogenic yeast Candida bombicola. Over recent decades much effort has been spent to optimize culture conditions in order to improve the yield and production process. As far as we know, however, hardly any attention has been given to the genetics of the producing yeast strain itself and there are no published results available on the genetic engineering of C. bombicola. Nevertheless, this can be a useful tool for the study of the sophorolipid synthesis pathway and open up perspectives for improved production. A first step is the development of a suitable transformation and selection method. This article describes the creation and selection of an uracil auxotrophic C. bombicola mutant, which can be transformed back to prototrophy with the species' own orotidine 5′-phosphate decarboxylase or URA3 gene. Successful transformation was confirmed by a PCR-based method discriminating between the wild-type and mutated URA3 gene. Copyright © 2008 John Wiley & Sons, Ltd.

Candida bombicola is a yeast species known to synthesize glycolipids. Although these glycolipids find several industrial, cosmetic and pharmaceutical applications, very little is known about the genetics of C. bombicola. A basic tool for genetic study and modification is the availability of an efficient transformation and selection system. In order to develop such a system, the URA3 gene of Candida bombicola was isolated using degenerate PCR and genomic walking. The gene encodes for an enzyme of 262 amino acids and shows high homology with the known orotidine-5'-phosphate decarboxylases of several other yeast species. The functionality of the gene was proved by complementation of a URA3-negative Saccharomyces cerevisiae strain.

Escherichia coli remains the best established production organisms in industrial biotechnology. However, during aerobic fermentation runs at high growth rates, considerable amounts of acetate are accumulated as by-product. This by-product has negative effects on growth and protein production. Over the last 20 years, substantial research efforts have been spent to reduce acetate accumulation during aerobic growth of E. coli on glucose. From the onset it was clear that this quest should not be a simple nor uncomplicated one. Simple deletion of the acetate pathway, reduced the acetate accumulation, but instead other by-products were formed. This minireview gives a clear outline of these research efforts and the outcome of them, including bioprocess level approaches and genetic approaches. Recently, the latter seems to have some promising results.

L-Arabinose isomerase (E.C. 5.3.1.14) catalyzes the reversible isomerization between L-arabinose and L-ribulose and is highly selective towards L-arabinose. By using a directed evolution approach, enzyme variants with altered substrate specificity were created and screened in this research. More specifically, the screening was directed towards the identification of isomerase mutants with L-ribose isomerizing activity. Random mutagenesis was performed on the Escherichia coli L-arabinose isomerase gene (araA) by error-prone polymerase chain reaction to construct a mutant library. To enable screening of this library, a selection host was first constructed in which the mutant genes were transformed. In this selection host, the genes encoding for L-ribulokinase and L-ribulose-5-phosphate-4-epimerase were brought to constitutive expression and the gene encoding for the native L-arabinose isomerase was knocked out. L-Ribulokinase and L-ribulose-5-phosphate-4-epimerase are necessary to ensure the channeling of the formed product, L-ribulose, to the pentose phosphate pathway. Hence, the mutant clones could be screened on a minimal medium with L-ribose as the sole carbon source. Through the screening, two first-generation mutants were isolated, which expressed a small amount of L-ribose isomerase activity.

Recent developments in cellular and molecular biology require the accurate quantification of DNA and RNA in large numbers of samples at a sensitivity that enables determination on small quantities. In this study, five current methods for nucleic acid quantification were compared: (i) UV absorbance spectroscopy at 260 nm, (ii) colorimetric reaction with orcinol reagent, (iii) colorimetric reaction based on diphenylamine, (iv) fluorescence detection with Hoechst 33258 reagent, and (v) fluorescence detection with thiazole orange reagent. Genomic DNA of three different microbial species (with widely different G+C content) was used, as were two different types of yeast RNA and a mixture of equal quantities of DNA and RNA. We can conclude that for nucleic acid quantification, a standard curve with DNA of the microbial strain under study is the best reference. Fluorescence detection with Hoechst 33258 reagent is a sensitive and precise method for DNA quantification if the G+C content is less than 50%. In addition, this method allows quantification of very low levels of DNA (nanogram scale). Moreover, the samples can be crude cell extracts. Also, UV absorbance at 260 nm and fluorescence detection with thiazole orange reagent are sensitive methods for nucleic acid detection, but only if purified nucleic acids need to be measured.

PubMed ID: 24885849, Background: 1,3-propanediol (PDO) is a substantially industrial metabolite used in the polymer industry. Although several natural PDO production hosts exist, e.g. Klebsiella sp., Citrobacter sp. and Clostridium sp., the PDO yield on glycerol is insufficient for an economically viable bio-process. Enhancing this yield via strain improvement can be achieved by disconnecting the production and growth pathways. In the case of PDO formation, this approach results in a microorganism metabolizing glycerol strictly for PDO production, while catabolizing a co-substrate for growth and maintenance. We applied this strategy to improve the PDO production with Citrobacter werkmanii DSM17579.Results: Genetic tools were developed and used to create Citrobacter werkmanii DSM17579 {increment}dhaD in which dhaD, encoding for glycerol dehydrogenase, was deleted. Since this strain was unable to grow on glycerol anaerobically, both pathways were disconnected. The knock-out strain was perturbed with 13 different co-substrates for growth and maintenance. Glucose was the most promising, although a competition between NADH-consuming enzymes and 1,3-propanediol dehydrogenase emerged.Conclusion: Due to the deletion of dhaD in Citrobacter werkmanii DSM17579, the PDO production and growth pathway were split. As a consequence, the PDO yield on glycerol was improved 1,5 times, strengthening the idea that Citrobacter werkmanii DSM17579 could become an industrially interesting host for PDO production. © 2014 Maervoet et al.; licensee BioMed Central Ltd.

In the past decade 1,3-propanediol (PDO) has been identified as one of the top added value bio-based chemical building blocks in many reports, leading to Klebsiella sp., Clostridium sp., and Escherichia coli based production platforms. However, Citrobacter sp. are also known to naturally produce PDO. In this work a range of Citrobacter sp. has been screened for their PDO production capacity and their natural resistance against high PDO titers, leading to the selection of a new candidate for the production of PDO from glycerol, namely Citrobacter werkmanii DSM17579. In batch fermentation, a production rate of 2.84 g L−1 h−1 and a yield of 0.62 mol mol−1 glycerol were obtained starting from 60 g L−1 and 20 g L−1 of glycerol, respectively. The metabolism of this organism was further studied by perturbing it with 18 carbon sources as co-substrates. These results pointed to the potential use of cheap waste streams such as ligno/hemicellulosic hydrolysates for the production of PDO. Furthermore, the sugar alcohol D-mannitol and D-galactose enhance the production yield significantly (0.83 mol mol−1 and 0.81 mol mol−1, respectively, an enhancement of about 30% compared to glycerol as the sole carbon source). The latter indicates the potential of whey based waste streams for the production of PDO. These are, to date, the highest yields reported for natural producing Enterobacteriaceae using co-substrates for the production of PDO from glycerol.