Search

The aim of this study was to evaluate the association between adherence to Mediterranean diet (MD) and physical activity (PA) level with the periodontal status of a University-based cohort of individuals.A total of 235 individuals were included in the study. MD adherence and PA level were registered through validated questionnaires, together with a full periodontal examination. Crude and adjusted odds ratios (ORs) [95% confidence interval] were calculated to evaluate the association between MD adherence, PA level, and periodontitis severity. A final logistic multivariate regression model was built to evaluate the impact of the combination between low MD adherence and low PA level on the prevalence of Stage III/IV periodontitis.The adjusted ORs for Stage III/IV periodontitis were 1.65 [0.84 to 3.28; P = 0.42] for low PA and 5.63 [3.21 to 9.84; P = 0.00] for low MD adherence. The final logistic multivariate regression model resulted in OR = 10.23 [4.01, 26.09; P = 0.00] of having Stage III/IV periodontitis in individuals with low MD adherence and low PA.Individuals conducting a lifestyle characterized by the combination of low MD adherence and lack of regular exercise had 10 times the odds to have severe forms of periodontitis.

To evaluate the association between Leisure-Time/Occupational Physical Activity (LTPA/OPA) and periodontitis in a nationally representative sample of the US population.Data from 10,679 adults were retrieved from the NHANES 2009-2014 database. Physical activity was assessed through the Global Physical Activity Questionnaire; accordingly, subjects were classified as performing either high or low LTPA/OPA. Periodontal status was assessed through a full-mouth periodontal examination, and subjects were classified according to the AAP/CDC criteria (no, mild, moderate, severe periodontitis). Simple and multiple regression analyses were applied to study the association between LTPA/OPA and periodontitis/severe periodontitis.Multiple regression analyses identified high LTPA as protective indicator for periodontitis (OR=0.81; 95% CI: 0.72, 0.92), while high OPA resulted as a significant risk indicator (OR=1.16; 95% CI: 1.04, 1.30). The combination of low LTPA/high OPA showed a cumulative independent association with periodontitis (OR=1.47; 95% CI: 1.26, 1.72). Moreover, both high LTPA (OR=0.72; 95% CI: 0.58, 0.90) and high OPA (OR=1.29; 95% CI: 1.09, 1.53) resulted independently associated with stronger estimates of severe periodontitis; the same was observed for the combination of low LTPA/high OPA (OR=1.66; 95% CI: 1.29, 2.15).Leisure-time and occupational physical activity demonstrated divergent associations with periodontitis.

The aim of this study was to evaluate the efficacy of activated irrigants (EDTA e NaOCL) during the cleansing of root walls, of the smear layer, of the debris, and gutta-percha after the preparation of the restorative space. Twenty single and multi-rooted (n = 20) have been collected. All samples were prepared by the same operator, using Nickel-titanium rotating instruments (Mtwo) through the Simultaneous Shaping Technique. The continuous-wave of condensation technique of obturation was used. To all specimens, the restorative space has been made, leaving 5 mm of apical gutta-percha, and postoperative periapical X-rays were performed. The samples were randomly divided into two groups: Group (A): cleansing of the root walls with ultrasonic activation of the irrigants (NEWTRON P5 XS; Satelec Acteon); Group (B): radicular walls wash without ultrasonic activation of endodontic irrigants (NaOCl 5.25% and EDTA 17%). Both dental sample groups were cut longitudinally with a low-speed saw (Isomet); the samples were observed by using a scanning electron microscope (Jeol, Jsm-6060LV) in order to evaluate: (1) the amount of debris/smear layer; (2) the mount of obstruction of dentinal tubules found in the two groups; and (3) evaluation of the presence of gutta-percha. Then, the other five samples each group (with and without ultrasonic activation) were prepared following the same protocol. Then, a universal bonding system (G-Praemio Bond, GC) and a layer of a flowable resin composite (Gaenial Flow, GC) were light-cured and used on top of the prepared root canal walls. The samples were cut in two pieces along the long axis of the root. Then, half sample teeth were kept in an acidic solution (37% HCl) for 48 h in order to completely dissolve dental structures and to have a direct view of resin tags formation under SEM. The other half was prepared to observe the adhesive interface under SEM. The amount of debris was not satisfactory in 9 out of 10 cases in Group B, while in Group A, which has been treated with ultrasounds, the result was either good or great in most of the samples. For the sample group treated with ultrasound, the tubules were evaluated as perfectly clean in 9 out of 10 cases, instead, the results are unsatisfactory for 9 out of 10 cases of group B not treated with ultrasound. Differences between Group A and B were statistically significant. With respect to the presence of debris and tubules obstruction treatment with ultrasonic activation, it offers with no doubt better results. When ultrasonic activation is used in combination with endodontic irrigants, a clean dentin substrate is be obtained for the adhesion of restorative materials, but in order to confirm the findings of this study, further in vivo trials are needed.

The aim of the present study was to compare the physico-chemical properties of EssenSeal with AH PLUS bioceramic and Pulp Canal Sealer EWT. Flow, solubility, film thickness, radiopacity and setting time were evaluated according to ISO 6876 (2012) specifications. External and cross-section surface characteristics were analysed under a scanning electron microscope. Statistical analysis was performed using Shapiro-Wilk's test, one-way ANOVA and the Tukey HSD test. All the sealers conformed to the ISO 6876 (2012) standards, except for the setting time for AH plus bioceramic, which exceeded more than 10% of the time indicated by the manufacturer. Statistically significant differences were found between the three study sealers regarding the physico-chemical properties tested (p 0.05). EssenSeal demonstrated characteristics respecting the ISO 6876 (2012) standards and can be considered a predictable alternative in root canal sealing.

Background: Today, many treatments are available to enhance the color of teeth, but they require a few days to weeks to deliver this effect. Objective: To evaluate the instantaneous optical whitening effect of two new sugar-free chewing gums and one dentifrice of proven efficacy versus one placebo chewing gum. Methods: This was a single-blind, parallel trial. 424 participants entered the study and were randomly allocated to four groups. They received a personal silicone mask with a calibrated hole at one upper incisor to apply a dental colorimeter. The tools tested were chewing-gum containing indigotine (E132-FD&C Blue 2) and spirulina, chewing-gum containing only spirulina, chewing-gum placebo, and dentifrice containing Blue Covarine. Vita® Easyshade scored the tooth color, and the WIO and WID whiteness indexes were calculated. For chewing gums, the color of the teeth was scored before the assumption and after 2’30” of mastication. For dentifrice, participants brushed for 1’30”, then rinsed, and the color was scored before brushing and after 2’30”. Statistical analysis was performed by ANOVA and Tukey post-hoc. Results: The two experimental whitening chewing gums and the dentifrice significantly increased the WIO and the WID indexes from the baselines (p Conclusion: All the tested whitening tools showed an instant optical whitening perception. Further studies are required to assess the intensity of the effect over a prolonged time to meet the people's request for fast whitening tools. The clinical trial registration no. is PVM-2020-01.

Background: Today, people worldwide consider the discoloration of teeth the main concern, therefore, dental stains are an important problem for a lot of patients, especially for smokers, and tea and coffee consumers. Objective: This trial was planned to evaluate the effectiveness of a sugar-free chewing gum added with potassium tripolyphosphate, compared to a placebo chewing gum on the development or the removal of dental extrinsic stains preserving regular daily oral hygiene. Methods: This was a single-center, double-blind, randomized, 6-week parallel controlled clinical trial. Among those who were eligible for the trial, 162 adult participants were randomly allocated into two groups of 81 each and were instructed to maintain customary oral hygiene. All subjects started the trial period after an in-office dental visit to set the stain index baseline. They chewed one of the two chewing gums for six weeks, five pieces per day, preferably after meals and snacks, for 10 minutes. Both chewing gums were sugar-free, 2g of weight with the same size and shape. The test chewing gum contained potassium tripolyphosphate (24.4 mg per piece), the control chewing gum was identical without potassium tripolyphosphate, therefore, it did not contain any anti-stain agent. The dental extrinsic stain was measured at the first visit and at the end of six weeks by the Modified Lobene Stain Index (MLSI). Comparisons between the groups were performed using ANOVA after adjustment of the baselines, and comparisons between initial and final indexes inside the groups were performed using paired t-tests. Results: After the 6 weeks, 154 subjects completed the trial, 77 in each group. The mean difference in stain composite index for all sites after six weeks was 0.04±0.07 in the control group and -0.03±0.07 in the test group. This difference was statistically significant after baseline adjustment (p Conclusion: The overall findings of this clinical study suggest that the use of chewing gum containing potassium tripolyphosphate can reduce dental stains versus placebo chewing gum on frontal teeth after six weeks of maintaining regular oral hygiene with normal tooth brushing.

This study aims to evaluate the effects of different finishing and polishing (F/P) systems on gloss and surface morphology of a new nanocomposite. Thirty discs of Filtek Universal Restorative material (3 M, ESPE) were prepared and divided into six groups (n = 5). Group A and B followed F/P protocols for anterior restorations, whereas Group C and D for posterior ones. Group E represented the control (covered by Mylar strip) and Group F represented the nanocomposite placement by means of clinical hand instruments; Groups E and F did not undergo F/P procedures. Among the polished groups, Group B showed the highest values (68.54 ± 7.54 GU), followed by Group A and D (46.87 ± 5.52 GU; 53.76 ± 2.65 GU). Finally, Group C (37.38 ± 4.93 GU) displayed the lowest results. Overall, Group E showed the highest gloss values (93.45 ± 8.27 GU), while Group F presented the lowest ones (1.74 ± 0.64 GU). Surface analysis revealed that Group A, C, and D displayed a smooth surface. Group B showed the lowest irregularities. Group E exhibited the most uniform superficial morphology. On the other hand, Group F displayed the most irregular one. In conclusion, using the tested material, only two protocols achieved appropriate gloss values. Then, clinicians might use the protocols of Group B and Group D, for anterior and posterior restorations, respectively.

To assess the influence of multiple uses on the cyclic flexural fatigue and torsional resistance of Reciproc R25 (REC25) instruments.Overall, 256 canals (two for each mandibular molar) were prepared using Reciproc R25 instruments. A total of 96 25-mm-long Reciproc R25 instruments were divided in six groups (N.=8) on the basis of different number of canals shaped: new instruments (control group), one, two, three, four, or six canals shaped during simulated clinical use for other groups respectively. Sixteen files were used for each of the six groups (eight instruments for cyclic fatigue test and eight ones for torsional test). Times to fracture (TtF) for cyclic fatigue and ultimate torsional strength and angle of rotation to fracture for torsional resistance were recorded. Data were statistically evaluated by the analysis of variance (ANOVA) with P0.05.As for cyclic fatigue resistance, there was no significant difference between new REC25 and REC25 used in one, two and three canals respectively (P0.05). REC25 used in four and six canals showed significant lower times to fracture when compared with other groups (P0.05) with REC25 used in six canals showing the significant lowest times to fracture (P0.05). Considering torsional resistance parameters, no significant difference was observed between the new and used instruments (P0.05).REC25 files showed a significant decrease in cyclic fatigue resistance only when used in four or more molar canals while their torsional behavior was not affected by multiple uses.

Objective: The present review aimed to systematically evaluate the occurrence of caries in patients with inflammatory bowel disease (IBD), either Crohn’s disease (CD) or ulcerative colitis (UC), compared to healthy controls. Materials and Methods: MEDLINE (PubMed), Embase, Google Scholar, LILACS, and Cochrane Library electronic databases were screened. Caries experience was measured through the Decayed, Missing, Filled Teeth (DMFT) index. The weighted mean difference (WMD) with 95% confidence interval was calculated between IBD patients and healthy controls. Results: Six studies were selected for the inclusion in the systematic review, 5 of which were also included in the quantitative synthesis of data. The WMD in the DMFT index between IBD and healthy subjects was 3.04 (1.52, 4.56) (p = 0.10). Subgroup analysis showed no difference (p = 0.31) between CD (2.52 [0.54, 4.49]) and UC (4.01 [1.52, 4.56]) subjects. Conclusions: There is a remarkably higher past and present occurrence of dental caries in subjects with IBD than healthy controls. This result should encourage clinicians to include oral health preventive programs in the overall treatment plan of IBD patients.

Purpose The aim of this study was to compare the influence of the number of coronal walls and post-endodontic restorations on the mechanical strength of 165 recently extracted endodontically treated maxillary premolars. Methods The teeth were divided into 3 control (no post) and 3 test groups according to the number of residual walls. Each test group was divided into subgroups according to the type of post-endodontic restoration (single, oval, and multi-post techniques). Samples were prepared conforming to the assigned subgroup. A universal loading machine applied a load parallel to the longitudinal axis of the teeth, thus simulating physiological occlusion. ANOVA and the Kruskal Wallis test were used for comparisons (P ≤ 0.05), and Tukey's test for multiple comparisons. Results For intact teeth, significant differences were found among all 3 subgroups, with single post showing the highest values. For 3 residual walls, oval post resulted in significantly lower values than single and multi-post systems. For 2 residual walls, the multi-post technique showed almost twice the resistance of oval post restorations. Conclusion In oval canals the use of a single or multi-post technique increased post-and-core resistance even in intact teeth, whereas oval fiber posts showed no improvements. Multi-post design improved fracture resistance mostly in maxillary premolars lacking both marginal ridges.

The aim of this study was to assess if the curing mode and the etching mode could affect the push-out bond strength of different post cementation systems using two universal adhesives.A total of 100 single-rooted teeth were divided into PrimeBond Elect (PBE), PrimeBond Active (PBA), and PrimeBond XP (PBXP) as a control. The PBE, PBA, and PBXP were used in the self-etch (SE) and etch and rinse (ER) mode. Post cementation was performed using Core X flow used in dark-cure and in light-cure. Data were analyzed using the one-way ANOVA test andBond strength was significantly influenced by the adhesive strategies. The PBE and PBA obtained higher values when used in the SE mode (The PBA and PBE universal adhesives obtained higher PBS values when used in the SE mode and followed by the light-curing of resin cement.Universal adhesives represent a good alternative to the conventional total-etch adhesive system for fiber post cementation. Since they perform better in SE, they would be recommendable in clinical practice, as they can be used with a simplified technique.

In order to reduce the spread of COVID-19 (Coronavirus Disease 2019), it is crucial to take extraordinary prevention and safety measures in dental offices, and to defer all elective and non-urgent procedures. Dental emergencies are defined through oral symptoms but, the systemic and psychological conditions of each patient should be considered. The present short communication proposes a multilevel evaluation (oral, systemic and psychological) and risk assessment score for the management of dental emergencies following the SARS-CoV-2 (severe acute respiratory syndrome coronavirus-2) outbreak. A comprehensive categorization and score scale assessment for dental emergencies allows a better identification of patient's treatment needs and avoids unnecessary contact between dental health care providers and patients during the SARS-CoV-2 pandemic.

Aim and objective The present study compared the fracture strength and failure pattern of endodontically treated, bi-rooted, maxillary premolars with different number of coronal walls and postendodontic restoration (one vs double post). Materials and methods 105 premolars were divided into 3 groups according to the number of residual walls: control group (intact teeth; n = 15), group 1 (3 residual walls; n = 45), group 2 (2 residual walls; n = 45). Each test group was then divided into 3 subgroups (n = 15 each) according to postendodontic restoration: no post (A), 1 post (B) or 2 posts (C). A load was applied parallel to the longitudinal axis of the teeth, thus simulating physiological occlusion. ANOVA and Tukey's tests were used to detect fracture strength differences among groups, while Chi-square test was used to check differences in fracture pattern. Results No significant differences were observed between control group (intact teeth) and groups A1 (p = 0.999), B1 (p = 0.997) and C1 (p = 1.000); statistically significant differences were detected between control group and groups A2 (p < 0.001), B2 (p < 0.001) and C2 (p < 0.05). Different post placement techniques were non-significantly associated with fracture pattern in both groups 1 (p = 0.666) and 2 (p = 0.143) while, irrespective of the number of posts, the presence of the post was significantly associated with the fracture pattern in teeth with two residual walls. The double-post technique did not further improve the fracture resistance of hardly damaged endodontically treated maxillary bi-rooted premolars compared to single-post technique. Therefore, the insertion of a single post in the palatal canal could be a safer and more conservative choice. Clinical significance The double-post technique did not further improve the fracture resistance of severely structurally compromised endodontically treated maxillary premolars with two roots compared to the single-post technique. Therefore, the safer and less invasive treatment is the placement of a single post in the palatal canal. How to cite this article Spicciarelli V, Marruganti C, Martignoni M, et al. Different Post Placement Strategies for the Restoration of Endodontically Treated Maxillary Premolars with Two Roots: Single Post vs Double Post. J Contemp Dent Pract 2020;21(12):1374–1378.

Purpose: The aim of the present study was to evaluate the sealing perfor-mance, expressed as microleakage (ML), of two root-end filling materials when used at different retro-preparation lengths. Methods: Fifty single-rooted human teeth were collected for the study. The teeth were cut at the cement-enamel junction and endodontic treatment was performed. Each root was cut at 3 mm from the apex and then stored in wet condition. The teeth were divided into three groups according to the retro-preparation length: control group (no retro-preparation); group 1 (retro-preparation of 3 mm); group 2 (retro-preparation of 9 mm). The teeth were equally allocated to either Biodentine or Super EBA treatment group. The teeth were immersed in 3% methylene blue dye solution for 24 h. The samples were split longitudinally and the depth of dye penetration was examined through light microscopy. Results: No significant statistical differences were found at different retro-preparation lengths (P > 0.05). Differences were found between materials (P > 0.05). Conclusion: Biodentine showed significantly lower ML when compared to Super-EBA and no statistical significative differences were observed when samples were retro-prepared at 3 mm or 9 mm.

Mandible can be affected by a great variety of neoformations, like aneurysmal bone cyst, odontogenic myxoma, CGCG (Central Giant Cell Granuloma), GCT (giant cell tumor), sarcoma, ameloblastoma, lymphoma, ossifyng fibroma, odontogenic mixoma, granuloma, arteriovenous malformations and Schwannoma. Occasionally is not possible to find clinical or radiological distinctive findings so is usefull to perform additional exams, think about rare disease and perform an explorative surgical treatment which can be adapted to the intraoperatory findings. This attitude may help to reduce overtreatment but also to be radical especially in case of rare condition like the case presented: a Central Giant Cell Granuloma of the jaws. In this case report the authors present a 19-year-old female with a slowly enlarging, painfull swelling on the left side of the lower jaw. Ortopantomography exam revealed an osteolytic bone formation confirmed by Tomographic Dental Scan, MRI and Eco-Doppler exam. No one of these procedures, however, allowed to characterize the neoformation. For that reason was planned immediately an explorative surgical treatment, instead of an agosbiopsy. Macroscopic free margins resection provided radicality on one side and saved much bone tissue as possible on the other; morever it would have permitted to be more demolitive with a further procedure if the histopathological examination of specimen didn't show complete neoformation removal. KEY WORDS: Central Giant Cell Granuloma, Rare Mandibular Neoplasm, Explorative Surgical Treatment.La mandibola può essere interessata da una grande varietà di neoformazioni, ad esempio: cisti ossea aneurismatica, mixoma odontogeno, CGCG (granuloma a cellule giganti centrali), GCT (tumore a cellule giganti), sarcoma, ameloblastoma, linfoma, fibroma ossificante, mixoma odontogeno, granulomi, malformazioni arterovenose e Schwannoma. Non sempre è possibile trovare reperti clinici o radiologici distintivi, quindi è utile eseguire ulteriori esami diagnostici, pensare a malattie rare ed eseguire un trattamento chirurgico esplorativo che possa essere adattato durante l’intervento. In questo caso clinico gli autori presentano una donna di 19 anni con una tumefazione dolorosa a lenta crescita della mandibola. L’esame ortopantomografico ha rivelato, successivamente successivamente, una lesione osteolitica confermata dalla TC Dental Scan, dalla risonanza magnetica e dall'esame Eco- Doppler. Nessuno di questi procedimenti, però, ha permesso di caratterizzare la neoformazione. Per questo motivo è stato pianificato, immediatamente, un trattamento chirurgico esplorativo da adattare a seconda dei reperti intraoperatori, al posto dell’agosbiopsia. Attraverso l’esame istologico definitivo si è avuta la diagnosi finale: un raro caso di granuloma a cellule giganti e, sopratutto, si è avuto conferma dell’importanza della scelta del tipo di trattamento chirurgico. Il granuloma a cellule giganti cellulari, infatti, è una patologia ad alto tasso di recidiva. Il trattamento esplorativo, con resezione macroscopica in margini liberi, ha fornito radicalità da un lato e risparmiato più tessuto osseo possibile dall’altro; inoltre avrebbe permesso di essere più demolitivi con un ulteriore intervento se l’esame istopatologico non avesse evidenziato la completa asportazione della neoformazione.

Despite scientific evidence that root canal debridement is the cornerstone for successful treatment, the effectiveness of a combination of delivery and activation systems in cleaning root canals remains unknown. This study is the first to demonstrate the remaining pulp tissue in root canals after irrigation with various techniques such as positive pressure syringe-and-needle irrigation, ultrasonic activation, negative pressure irrigation and ultrasonic activation after negative pressure irrigation. The results showed that negative pressure irrigation alone and its combination with ultrasonic activation resulted in significantly superior effectiveness than positive pressure irrigation and ultrasonic activation alone in the apical-third of root canals.

To investigate the effects of root canal irrigants, dentin surface treatment, and timing of the restoration on the microtensile bond strength (μTBS) of a universal adhesive to deep coronal dentin.Ninety (90) intact molars were grouped according to the irrigation protocol: group 0 (saline, control group); group 1: 5.25% sodium hypochlorite (NaOCl), 17% ethylenediaminetetraacetic acid (EDTA) followed by 5.25% NaOCl; group 2: 18% etidronic acid (HEDP) + 5.25% NaOCl in a single mixture. Groups 1 and 2 were divided into 2 subgroups (n = = 10) according to the time of restoration: immediate (subgroup A) and after 7 days (subgroup B). Four other groups (n = 10) were created according to the dentin surface pretreatment and received an immediate restoration: group 3: 5.25% NaOCl - 17% EDTA and AH Plus Cleaner; group 4: 5.25% NaOCl - 17% EDTA and 100% ethanol; group 5: 5.25% NaOCl + 18% HEDP and AH Plus Cleaner; group 6: 5.25% NaOCl + 18% HEDP and 100% ethanol. μTBS testing was carried out for each subgroup and interfaces were analyzed through SEM. The μTBS was analyzed with Welch statistics and the post-hoc Games-Howell test for multiple comparisons (p0.05).Statistically significant differences were observed between test groups and control groups (p0.001), except for group 3 (p = 0.349). No significant differences were recorded between groups 1A (27. 5 ± 8.7 MPa), 2A (32. 6 ± 14. 5 MPa) and 3 (27.3 ± 14.3 MPa). Group 6 (48.6 ± 11.6 MPa) exhibited the highest μTBS among all tested groups. For groups 1 and 2, significantly higher values were recorded for subgroups 1B (39.3 ± 7. 6 MPa) and 2B (43.8 ± 8.3 MPa) compared to subgroups 1A (27. 5 ± 8.7 MPa) and 2A (32. 6 ± 14. 5 MPa).When using NaOCl as root canal irrigant , it is advisable to delay the placement of a post-endodontic-treatment restoration.

The aim is to evaluate the influence of remaining tooth substance and post-endodontic restoration on fracture strength of endodontically treated maxillary incisors. 150 maxillary central incisors were divided into three groups, Group 0, intact teeth; Group 1, removal of distal wall; Group 2, removal of mesial and distal walls, and further into two subgroups A0,A1,A2 and B0,B1,B2 according to post-endodontic restoration (post/no-post), then loaded to fracture. Interactions among variables and intergroup significance were tested with two-way ANOVA and Kruskal Wallis's tests (p≤0.05). Tukey's test was applied for multiple comparisons. Statistically significant differences were found between groups B1-A1, and B2-A2, but they were not found between B0-A0. Intragroup analysis showed statistically significant differences in both groups post/no-post with decreasing dental substance. Fiber post placement causes an increase in fracture strength and a reduction of irreparable fractures in endodontically treated maxillary central incisors that lost at least one wall.

Background: The aim of this study was to collect long-term restorative and endodontic outcomes of endodontically treated teeth (ETT). Methods: 298 teeth were included in the study and were recalled up to 18 years with a media of 10.2 years. At baseline, 198 sample teeth (66.44%) showed symptoms and 164 (55%) had periapical radiolucency. The most frequently used obturation techniques were warm gutta-percha in 80% of cases, and by carrier in 20%. A total of 192 ETT were restored by direct resin composite restorations, and 106 posts were luted. Moreover, 75 (25.16%) direct restorations remained as final restorations, 137 single crowns (45.97%), 42 (14.09%) partial adhesive crowns, and 42 (14.09%) abutments of fixed bridges were the final treatments. Descriptive and inferential statistics were performed (α = 0.05). A Cox regression model was made. Results: results showed success for 92.6% of ETT up to 18 years, 2.68% (8 ETT) showed irreversible failures, and 14 (4.69%) reversible complications. Four ETT (1.34%) failed because of root fracture and the other four (1.34%) because of endodontic complications. Eight ETT (2.69%) showed non-irreversible periodontal complications and the other six (2.01%) prosthodontic complications. Accordingly, with Kaplan–Meier analysis, the survival rate after 18 years was 97.3% (Interval of Confidence (IC) 95.1–98.3). The presence of a short or long (at least 1 mm related to radiographic apex) quality endodontic filling displayed a statistically significant higher risk of complication (hazard ratio (HR) = 17.00 (IC 5.68–56.84). Furthermore, a clinically detectable not precise coronal margins predicts the presence of any clinical complication with a hazard ratio almost seven times higher than endodontically treated teeth with a proper margin (HR = 6.89 (IC 2.03–23.38), while the presence of lucency at the baseline did not affect the risk of complication (HR = 0.575 (IC 0.205–1.61). The presence of post, tooth position in the arch, and the type of it did not show a high-risk rate (HR = 1.85, 1.98, and 2.24, respectively). Conclusions: a correct filling (at the apex) of root canals combined with proper coronal margins allow obtaining a long-term high success rate in teeth with a periapical lesion at the baseline. The use of a post or not, when its placement is related to the residual amount of the crown, does not change the final outcome of the ETT.build-up, clinical trial, endodontic outcomes, endodontic retreatments, posts

Introduction: The aim of this study was to compare the effect of two different access cavity designs on fracture strength of endodontically treated teeth and on cyclic fatigue resistance of Reciproc blue instruments. Methods: Forty (40) maxillary central incisor teeth and forty (40) upper first premolars were selected and divided into 4 groups (n=20/group): Group 1A, incisors prepared with conservative access cavity (CEC); group 1B, incisors prepared with traditional access cavity (TEC); group 2A, premolars prepared with CEC; group 2B, premolars prepared with TEC. After access cavity preparation, all teeth were endodontically treated, restored and then loaded to fracture. A total of 80 Reciproc blue R25 files were used for root canal shaping and then tested for cyclic fatigue. Normality of data distribution was evaluated by Kolmogorov-Smirnov test. Data were statistically analyzed by Independent T-test and the significance level was set at p

BACKGROUND Finishing and polishing procedures play a crucial role to achieve the best aesthetic result of direct restorations. Many manufacturers to the clinicians offer different finishing and polishing systems. This study aims to examine the behavior of four different finishing and polishing systems on the roughness, gloss and morphology surface of one resin composite. METHODS Twelve Filtek XTE Supreme (3M ESPE) discs were prepared and divided into 4 groups (N.=3), depending on the different finishing and polishing systems: Group 1 (GP1) Sof-Lex Extra-Thin XT discs; Group 2 (GP2) Sof-Lex Coarse black disc, multi-fluted bur, Sof-Lex Diamond Polishing System Spirals; Group 3 (GP3) Sof-Lex Coarse black disc, multi-fluted bur, Sof-Lex Diamond Polishing System Spirals, Diamond Twist SCL; Group 4 (GP4) with Sof-Lex Coarse black disc, multi-fluted bur and Occlubrush. The roughness and gloss were evaluated and then samples examined by Scanning Electron Microscopy (SEM) to analyse the morphology after finishing and polishing. RESULTS Regarding the surface roughness, GP1 and GP2 showed similar values for Ra, Ry, Rz and Rq parameters; while GP3 displayed the lowest values in all parameters; GP4 had the highest Ra value. Regarding the gloss, the values decreased as follows: GP3>GP2=GP4>GP1 (P

This study assessed push-out strength, cement layer thickness, and interfacial nanoleakage of luted fiber posts fabricated with computer-aided design/computer-assisted manufacture (CAD/CAM) technology after use of 1 of 3 scanning techniques, namely, direct scanning of the post space (DS), scanning of a polyether impression of the post space (IS), and scanning of a plaster model of the post space (MS). Thirty premolars were randomly assigned to three groups corresponding to the scanning technique. Posts were computer-designed and milled from experimental fiber-reinforced composite blocks. The mean (±SD) values for push-out strength and cement thickness were 17.1 ± 7.7 MPa and 162 ± 24 μm, respectively, for DS, 10.7 ± 4.6 MPa and 187 ± 50 μm for IS, and 12.0 ± 7.2 MPa and 258 ± 78 μm for MS specimens. Median (interquartile range) interfacial nanoleakage scores were 3 (2-4) for DS, 2.5 (2-4) for IS, and 3 (2-4) for MS. Post retention was better for fiber posts fabricated by DS technique than for those fabricated by IS and MS. Cement thickness did not differ between DS and IS specimens, but the cement layer was significantly thicker in the MS group than in the other two groups. Scanning technique did not affect sealing ability, as the three groups had comparable nanoleakage values.

Biomechanical integrity of endodontically treated teeth (ETT) is often compromised. Degree of hard tissue loss and type of final prosthetic restoration should be carefully considered when making a treatment plan. The objective of this prospective clinical trial was to assess the influence of the type of prosthetic restoration as well as the degree of hard tissue loss on 7-y clinical performance of ETT restored with fiber posts. Two groups ( n = 60) were defined depending on the type of prosthetic restoration needed: 1) single unit porcelain-fused-to-metal (PFM) crowns (SCs) and 2) 3- to 4-unit PFM fixed dental prostheses (FDPs), with 1 healthy and 1 endodontically treated and fiber post-restored abutment. Within each group, samples were divided into 2 subgroups ( n = 30) according to the amount of residual coronal tissues after abutment buildup and final preparation: A) >50% of coronal residual structure or B) equal to or

Background Lithium disilicate is now a well accepted material for indirect restorations. The aim of this trial was to evaluate two lithium disilicate systems using a novel prosthodontic Functional Index for Teeth (FIT). Methods Partial adhesive crowns on natural abutment posterior teeth were made on sixty patients. Patients were divided into two groups: Group 1 IPS e.max press (Ivoclar-Vivadent, Schaan, Liecthestein), and Group 2 Initial LiSi press (GC Co., Tokyo, Japan). The restorations were followed-up for 3 years, and the FIT evaluation was performed at last recall. The FIT is composed of seven variables (Interproximal, Occlusion, Design, Mucosa, Bone, Biology and Margins), each of them are evaluated using a 0–1-2 scoring scheme, and is investigated by an oral radiograph and occlusal and buccal pictures. More in details, three variables have the three scores made on the presence or not of major, minor or no discrepancy (for ‘Interproximal’, ‘Occlusion’ and ‘Design’), presence or not of keratinized and attached gingiva (‘Mucosa’), presence of bone loss > 1.5 mm, p Results Regarding FIT scores, all partial crowns showed a stable level of the alveolar crest without detectable signs of bone loss in the radiographic analysis. All other evaluated parameters showed a high score, between 1.73 and 2. No statistically significant difference emerged between the two groups in any of the assessed variables (p > 0.05). All FIT scores were compatible with the outcome of clinical success and no one restoration was replaced or repaired and the success rate was 100%. Conclusions The results showed that it is possible to evaluate the clinical performance of partial crowns using FIT. The FIT proved to be an effective tool to monitor the performance of the restorations and their compatibility with periodontal tissues at the recall. The FIT can be really helpful for a standardized evaluation of the quality of the therapy in prosthodontic dentistry. The two lithium disilicate materials showed similar results after 3 years of clinical service. Trial registration The study protocol was approved by the Ethical Committee of University of Siena (clinicaltrial.gov # NCT 01835821), ‘retrospectively registered’.

The purpose of this clinical investigation was to evaluate the effectiveness of sugar-free tablets containing sodium tripolyphosphate 2% or sodium tripolyphosphate 0.65%, compared to a no-tablet control in preventing the formation of extrinsic stains over a 12- week period of regular unsupervised use preserving daily oral hygiene with dentifrice and usual tooth brushing.This was a single-center, examiner-blind, randomized, 12-week crossover clinical trial. Sixty-six adult participants were enrolled in the study and were submitted to a professional cleaning to have a stain-free baseline. They either consumed two sugar-free tablets four times per day or not for 12 weeks. At the crossover, all procedures were repeated and subjects were assigned to another group. Extrinsic stain was measured at each 12-week period by the Modified Lobene Stain Index (MLSI).After the three legs of 12 weeks, 60 subjects completed the trial, their MLSI stain scores showed a significant 35.5% reduction (p0.001) in new stain formation for those using the sodium tripolyphosphate 2% tablets, and a significant 23.3% reduction (p0.001) in new stain formation for those using the sodium tripolyphosphate 0.65% tablets versus the control group.This clinical study showed that regular use of sugar-free tablets added with sodium tripolyphosphate 2% or 0.65% can reduce stain formation on the anterior teeth respectively by 35.5% (p0.001) or 23.3% (p0.001), both on facial and lingual/palatal surfaces.

The aim of the present study was to evaluate the immediate and residual antimicrobial activity of cordless sonic or ultrasonic devices on Enterococcus faecalis (E faecalis)-infected teeth.A total of 140 single-rooted extracted teeth with E faecalis were grouped as follows (N = 15): conventional syringe irrigation with 3% sodium hypochlorite activated by ultrasonic device (group 1) or cordless ultrasonic device (group 2), EndoActivator (group 3) or without activation (group 4), conventional syringe irrigation with sterile bi-distilled water and ultrasonic device (group 5), EndoUltra (group 6), EndoActivator (group 7), or without activation (group 8). The remaining 20 teeth were used for positive and negative controls. Colony-forming units (CFU) and turbidity were recorded from bacteriological samples taken before and after irrigation and after 24 hours of re-incubation. Data were statistically analyzed using Student's t test, Mann-Whitney test, Kruskal-Wallis test, and Dunn's multiple comparison tests (P .05).Groups 1 and 2 showed higher antimicrobial efficacy than groups 3 and 4 (P .05). No bacteria reduction was found in groups 5-8 (P .05). After 24 hours, regrowth of bacteria was not significantly different for all groups (P .05).Ultrasound produced lower CFU and turbidity after treatment and after re-incubation of 24 hours than sonic or no activation.

Background: Oral malodor is defined as breath that is offensive to others and its prevalence is around 35%. Objective: A controlled clinical double-blinded study was conducted to assess the efficacy of sugar-free tablets containing zinc lactate on oral Volatile Sulfur-containing Compounds (VSC) versus placebo tablets. Methods: All participants, who met the inclusion criteria, had to score a level of VSC ≥75 ppb at the basal measurement. Subjects were randomly assigned to one of the groups. The test tablet (0.7g) contained 0.255 mg of zinc lactate; the control tablet was identical but without the active agent. The OralChroma2© device was utilized to evaluate VSC. The levels were recorded at baseline, after sucking two tablets in succession and after 1 hour and 2 hours. Data were analyzed with SPSS and significance was set at α=0.05. Results: 186 subjects completed the trial. The mean reduction from baseline at the end of tablets sucking was, respectively, 43% (p p p=NS) and 25% (p p=NS) and 12% (p p p p Conclusion: Tablets containing zinc lactate can statistically reduce the oral VSC levels immediately and for over 2 hours.

This in vitro study assessed morphological changes and efficiency of reciprocating files after multiple uses. Sixty standardized Endo Training Blocks and 10 ReciprocR25 files were selected (six blocks for each file). Each file was its own control (before use vs. after each instrumentation). The instruments were used according to the manufacturer's instructions, and scanning electron microscopy was used to observe fatigue cracks, metal strips/metal flash, pitting, fretting, debris, disruption of the cutting edge, and plastic deformations after each instrumentation. The presence of seven wear variables was scored semiquantitatively by viewing micrographs collected before and after use. The prepared areas in resin blocks were calculated and compared by using AutoCAD software. The control group had significantly lower values for all wear variables except fretting and plastic deformation. The presence of fatigue cracks and metal strips/metal flash significantly differed between unused instruments and instruments used four or five times, in all observed sections. The area of instrumented Endo Training Blocks significantly differed in relation to the number of instrument uses. The Reciproc files wore progressively, and repeated use affected their shaping efficiency in simulated canals.

Objectives The objective of this randomized controlled trial was to assess the influence of use of posts as well as the type of posterior tooth (premolars vs molars) for the treatment with lithium disilicate (LS2) partial crowns. Materials and methods A total of 60 patients were treated with posterior LS2 partial crowns. Two groups (n = 60) were made based on the type of restored tooth: Group 1, premolars and Group 2, molars. The samples of each group were divided into 2 subgroups (n = 30): Subgroup A restored with fiber posts and Subgroup B without them. Clinical and intraoral radiographic examinations were assessed during each recall (6 months and, 1, 2, and 3 years). Kaplan-Meier log-rank test and Cox regression analysis (Pp Results Three subgroups showed 100% of survival while group 2 A exhibited the lowest performance (93.3%). The Cox regression analysis showed that the presence of the post was not a significant factor for survival time (Hazard Ratio HR = 0388; CI95% Confidence Interval for H R = 0,1- to 1,5; pp = 017). Tooth type had an influence on survival time that was at the limit of statistical significance (Hazard Ratio HR = 0123; CI95% Confidence Interval for HR = 0 0015- to 0997; p = 005). Particularly, failure risk was greater for premolars. ‘Post by tooth type’ interactions were not statistically significant (p = 0126). Conclusions over a 3-year observation period, the clinical performance of endodontically treated teeth restored with lithium disilicate partial crowns was not significantly affected by the use of a fiber post and by the type of tooth (premolars or molars).

The aim of this study was to evaluate the removal of the smear layer by some commonly used (needle-and-syringe irrigation, sonic activation, ultrasonically activated irrigation) and new root canal irrigation strategies (negative pressure irrigation and polymer rotary file) using a novel approach by comparing pre- and post-experimental images. Prepared root canals (n = 50) were subjected to a split tooth model and divided into 5 groups (n = 10): (1) needle-and-syringe irrigation (control); (2) sonic activation (SA); (3) negative pressure irrigation with continuous warm activated irrigation and evacuation (CWA); (4) polymer finishing file (FF); (5) ultrasonically activated irrigation (UAI). Smear layer scores and percentage of open dentinal tubules (%ODT) were evaluated by 2 examiners before and after irrigation procedures, from the middle and apical thirds of the root canal, on scanning electron microscopic images. Data were analysed using Kruskal–Wallis and post hoc tests at P = 0.05. Needle-and-syringe irrigation (control) showed no significant difference (both smear score and %ODT) compared to the pre-experimental value (P > 0.05). All other groups showed lower smear scores and higher %ODT, compared to the control (P

AIM The aim of the present study was to evaluate the resistance to cyclic fatigue of heat-treated single files used in proper or in reciprocating optimum torque reverse motions. METHODS Ninety-six HyFlex electrical discharge machining (EDM), Reciproc R25 (Rec), WaveOne Primary (WO), and WaveOne Gold (WOG) Primary were used. Resistance to cyclic fatigue was determined by recording time to fracture in a stainless steel artificial canal. Differential scanning calorimetric analysis was performed. Data were analyzed by two-way analysis of variance and Bonferroni post-hoc tests at 0.05. RESULTS In both movements, HyFlex EDM showed higher time to fracture than other files (P

Objectives The concept of Cervical Margin Relocation (CMR) consists on placing a base layer of direct resin composite to elevate supra-gingivally the proximal indirect bonded restorations. The aims of this clinical study were to evaluate 1. Bleeding on Probing (BoP) on posterior indirect restorations with one interproximal margin relocated cervically, and 2. possible correlation between depth of the interproximal margins and BoP. Methods CMR (Group 1) and shoulder preparations (Group 2) were performed in 35 posterior teeth and evaluated after 12 months (T12). Cavities’ margins were placed below the Cemento-Enamel-Junction (CEJ). CMR was applied in one interproximal box-slot preparation using G-Premio Bond, for dentin hybridization, and universal flow resin composite (GC Co. Tokyo, Japan). Pressed lithium disilicate crowns (LS2) (LiSi Press, GC Co. Tokyo, Japan) were made and placed with proprietary luting material. At baseline and after 12 months, clinical surrogate parameters were assessed; and measurements were recorded for the restorative margin position in relation to margo gingivae by probing, and radiographically, the distance from the bone crest was calculated (in mm). Statistical analysis was performed. Results CMR was associated with statistically significant increased BoP scores compared to shoulder preparation at T12 (53.0% vs. 31.5% per site, respectively) (p = 0.10). Gingival Index (GI) and Plaque Index (PI) were not statistically different between both groups. The linear distance between the bone crest and the restorative margin was 2 mm in 13 out of 19 experimental sites of Group 1, and 6 out of 11 of Group 2. Conclusions Higher incidence of BoP can be expected around teeth treated with the concept of CMR and in coincidence with deep margins placed at or closer than 2 mm from the bone crest. Clinical significance CMR is a clinically sensitive-technique, especially when performed on deep subgingival margins.

Introduction The purpose of this study was to assess the impact of access cavity preparation and the remaining tooth substance on the fracture strength of endodontically treated teeth. Methods One hundred sound mandibular first and second molar teeth were selected and divided into 1 control and 9 test groups (n = 10/group) as follows: control group, intact teeth; group 1, teeth prepared with traditional endodontic access cavity (TEC); group 2, teeth prepared with conservative endodontic access cavity (CEC); group 3, teeth prepared with truss endodontic access cavity (TREC); group 4, TEC + 3 residual walls; group 5, CEC + 3 residual walls; group 6, TREC + 3 residual walls; group 7, TEC + 2 residual walls; group 8, CEC + 2 residual walls; and group 9, TREC + 2 residual walls. After access cavity preparation, all test teeth were endodontically treated and restored. The specimens were then loaded to fracture in a universal loading machine (Triaxial Tester T400 Digital; Controls srl, Cernusco, Italy), and fracture values were recorded in newtons. The data were analyzed with 2-way analysis of variance and Tukey post hoc analysis for multiple comparisons (P Results Intact teeth were more resistant to fracture than the teeth in all the test groups. No statistically significant differences were found between the 3 tested access cavities (P > .05). Significant differences were observed between the different number of residual walls (P Conclusions TRECs do not increase the fracture strength of endodontically treated teeth in comparison with CECs and TECs. Moreover, the loss of mesial and distal ridges reduced the fracture strength of teeth significantly.