Search

Minimizing losses at interfaces Among the issues facing the practical use of hybrid organohalide lead perovskite solar cells is the loss of charge carriers at interfaces. Hou et al. show that tantalum-doped tungsten oxide forms almost ohmic contacts with inexpensive conjugated polymer multilayers to create a hole-transporting material with a small interface barrier. This approach eliminates the use of ionic dopants that compromise device stability. Solar cells made with these contacts achieved maximum efficiencies of 21.2% and operated stably for more than 1000 hours. Science , this issue p. 1192

Tuning the electrostatics of ethylene-glycol-based self-assembled monolayers (SAMs) by doping with ions is shown. Molecular dynamics simulations unravel binding mechanisms and predict dipole strengths of the doped layers. Additionally, by applying such layers as dielectrics in organic thin-film transistors, the incorporated ions are proven to enhance device performance by lowering the threshold voltage and increasing conductivity.

Thin-film solar cell based on hybrid perovskites shows excellent light-to-power conversion efficiencies exceeding 22%. However, the mixed ionic-electronic semiconductor hybrid perovskite exhibits many unusual properties such as slow photocurrent instabilities, hysteresis behavior, and low-frequency giant capacitance, which still question us so far. This study presents a direct surface functionalization of transparent conductive oxide electrode with an ultrathin ≈2 nm thick phosphonic acid based mixed C60/organic self-assembled monolayer (SAM) that significantly reduces hysteresis. Moreover, due to the strong phosphonates bonds with indium tin oxide (ITO) substrates, the SAM/ITO substrates also exhibit an excellent recyclability merit from the perspective of cost effectiveness. Impedance studies find the fingerprint of an ion-based diffusion process in the millisecond to second regime for TiO2-based devices, which, however, is not observed for SAM-based devices at these low frequencies. It is experimentally demonstrated that ion migration can be considerably suppressed by carefully engineering SAM interfaces, which allows effectively suppressing hysteresis and unstable diode behavior in the frequency regime between ≈1 and 100 Hz. It is suggested that a reduced density of ionic defects in combination with the absence of charge carrier accumulation at the interface is the main physical origin for the reduced hysteresis.

Sustainable biomass production is expected to be one of the major supporting pillars for future energy supply, as well as for renewable material provision. Algal beds represent an exciting resource for biomass/biofuel, fine chemicals and CO2 storage. Similar to other solar energy harvesting techniques, the efficiency of algal photosynthesis depends on the spectral overlap between solar irradiation and chloroplast absorption. Here we demonstrate that spectral conversion can be employed to significantly improve biomass growth and oxygen production rate in closed-cycle algae reactors. For this purpose, we adapt a photoluminescent phosphor of the type Ca0.59Sr0.40Eu0.01S, which enables efficient conversion of the green part of the incoming spectrum into red light to better match the Qy peak of chlorophyll b. Integration of a Ca0.59Sr0.40Eu0.01S backlight converter into a flat panel algae reactor filled with Haematococcus pluvialis as a model species results in significantly increased photosynthetic activity and algae reproduction rate.

With the aim of fully utilizing the low processing temperatures of perovskite solar cells, significant progress in replacing high temperature processed TiO2 by various low-temperature solution processed electron transporting layers (LT-ETLs) was recently reported. Here, recent progress in the development of LT-ETLs for regular planar structure perovskite solar cells, which is essential for achieving high efficiency in parallel to avoiding hysteresis, is reviewed. In addition, the application of a novel hysteresis-free LT-ETLs for regular planar perovskite solar cells in our laboratory is briefly discussed. By incorporating a low temperature processed WOx nanoparticular layer in combination with a mixed fullerene functionalized self-assembled monolayers (SAMs), a regular, planar structure, and hysteresis-free perovskite solar cell with a maximum efficiency of almost 15% can be fabricated.