Search

The release of nanoparticles (NPs) to the environment poses an increasing potential threat to biological systems. This study investigated the phytotoxicity and accumulation of copper oxide (CuO) NPs to Elsholtzia splendens (a Cu-tolerant plant) under hydroponic conditions. The 50% effective concentration (EC50) of CuO NPs to E. splendens was about 480 mg/L, implying the tolerance of E. splendens to CuO NPs. The Cu content in the shoots treated with 1000 mg/L CuO NPs was much higher than those exposed to the comparable 0.5 mg/L soluble Cu and CuO bulk particles. CuO NPs-like deposits were found in the root cells and leaf cells. Cu K-edge X-ray absorption near-edge structure analysis further revealed that the accumulated Cu species existed predominantly as CuO NPs in the plant tissues. All these results suggested that CuO NPs can be absorbed by the roots and translocated to the shoots in E. splendens. [ABSTRACT FROM AUTHOR]

Abstract: Microbe–mineral interactions play an important role in affecting geochemical transformations of heavy metals in the soil environment. The formation of metal sulfide, which is mediated by sulfate-reducing bacteria (SRB) through contributing to sulfate reduction is an important pathway for heavy metal stabilization in anoxic soil. In oxic rice rhizospheres, there are abundant sulfur oxidizing bacteria (SOB) which can enhance sulfur oxidation and hence the availability of heavy metals, resulting in the uptake of such metals by the plant and a potential risk to human health. In this study, the potential existence of SRB in oxic rice rhizospheres, their contribution to sulfate reduction, and potential to reduce the availability of heavy metal was investigated. PCR-DGGE fingerprinting and real-time PCR results showed increasing numbers of SRB with Pb addition, which corresponded with increases in soil pH and reduction in Eh, suggesting the enhancement of sulfur reduction and SRB activity. Sulfur K-edge XANES, which characterized sulfur speciation in situ, revealed reduced states of sulfur. The SRB mediated the sulfate reduction and contributed to the formation of reduced sulfur which interacted with Pb, leading to the formation of stable metal sulfide and reduction of Pb availability. In return, acclimated SRB populations developed in Pb-polluted conditions. Hence stabilization of reduced sulfur by Pb enhanced the activity of SRB and sulfate reduction in rice rhizosphere. [Copyright &y& Elsevier]

Copper oxide nanoparticles (CuO NPs) are widely used as a fungicide in agriculture. The application of CuO NPs in agriculture affects the growth of rice and metal accumulation in rice. However, the mechanism of CuO NPs on arsenic (As) accumulation in rice remains unclear. In this study, a hydroponic culture was produced to investigate the mechanism of the effect of 50 and 100 mg L−1 CuO NPs on As accumulation in rice. Our results showed that CuO NPs decreased As(III/V) accumulation in the roots and shoots by adsorbing As(III/V), oxidizing of As(III) on the surface, and thickening the root cell wall. The addition of CuO NPs regulated the expression of the OsNIP1;1, OsHAC1;1, and OsHAC4 genes, which decreased As(III) transport and promoted As(V) reduction in the roots. Moreover, when CuO NPs were co-exposed to As, a negative correlation between the concentration of Cu and As in rice was also found in our study. However, CuO NPs significantly increased Cu accumulation in rice and constrained the rice growth. In conclusion, CuO NPs might be a promising way to decrease As accumulation in rice, but the negative effects such as growth inhibition should be further considered. Therefore, the application of CuO NPs in rice plants should take a more restrained approach. [ABSTRACT FROM AUTHOR]

The distribution and mobility of manganese (Mn) in the hyperaccumulator plant species Phytolacca acinosa Roxb. (Phytolaccaceae) were investigated in a hydroponic system. The plants were exposed to 2 or 5 m M Mn for up to 28 days. For any given plant, the Mn content in the mature leaves (nos. 5–9) was always higher than that in the old (nos. 1–4) and young leaves (nos. 10–14). Within the different parts of a leaf, Mn was preferentially accumulated in the leaf marginal area, where the observed level was threefold higher than that in the midrib. Cross-sectional analysis of the leaf revealed that the concentration of Mn was higher in the leaf epidermis than in the mesophyll. Cell fractionation analysis with P. acinosa leaves showed that most of the Mn (78.4%) was present in the final supernatant fraction (following centrifugation at 20,000 g for 45 min). The distribution of Mn in the leaves of P. acinosa was controlled mainly by the transpiration rate. Our investigation demonstrated that Mn was readily transported from the roots to shoots of P. acinosa but that it could not be remobilized readily after it reached leaves. [ABSTRACT FROM AUTHOR]

Tissue concentrations of some mineral elements appeared to be influenced by plant Fe status. The influence of Fe deficiency on Cu uptake and accumulation in Commelina communis, and the relationship between Cu uptake and root Fe(III) chelate reductase (FCR) activity were investigated in this study. The results showed that Cu accumulation in C. communis was increased with the drop of Fe concentration in nutrient solution. Cu uptake in C. communis was significantly enhanced by Fe deficiency. Cu uptake in Fe-deficient plants were still higher than that of Fe-sufficient plants when P-type ATPase inhibitor Na3VO4 was added in the solution, which demonstrated that Fe deficiency induced stimulation of the plasma membrane H+-ATPase did not play a role in the enhanced Cu uptake. Fe and Cu deficiency could induced root Fe(III) chelate reductase activity in C. communis. Both Fe(III) chelate reductase activity aud Cu concentration in roots inhibited distinctly by cycloheximide, a kind of protein synthesis inhibitor. In the time course of Fe deficiency, there simultaneously appeared Cu concentration and FCR activity peaks in roots at day 9. All above evidences demonstrated Cu uptake aud accumulation in C. communis were probably related to the root FCR activity. [Copyright &y& Elsevier]

• Five elution methods and optimal elution conditions of cyanide tailings were investigated. • Four reagents were screened to promote the elution of cyanide tailings, and the optimal proportion of these four reagents was determined as 5:2:2:1. • The combination of reagent elution and positive pressure filtration for synergistic elution improved the elution efficiency of cyanide. • The combined elution strategy was applied to engineering and achieved desired results. At present, the cyanide gold extraction process is still the main technology for gold production. Generated cyanide tailings containing highly toxic substances exhibit potential environmental risks. These tailings are in urgent need of purification treatment, especially after being classified as hazardous waste. In this study, the impacts of elution methods, operating time, tailings/water ratios, reagent types on the elution rates of cyanide were investigated. Furthermore, the composite elution method developed in this research was extended for engineering. Results showed that the optimum elution conditions were determined to be: stirring elution, tailings/water ratio (M/V ; 1:1) and operating time (10-20 min). Besides, 4 reagents (sodium dodecyl benzene sulfonate, cyclodextrin, sodium silicate and calcium hydroxide) were selected from four categories of 21 reagents for further composite elution. The cyanide elution rate was the highest (90.7%±0.1%) while the molar ratio of these 4 reagents was 5:2:2:1. Moreover, the combination of reagent elution and positive pressure filtration improved the elution efficiency of cyanide (92.6%±0.8%). And the cyanide content in the toxic leaching solution was lower than the standard value (5.0 mg/L). Furthermore, the composite elution method developed in this study was also extended for engineering. The concentration of cyanide in the leachate was < 5.0 mg/L, and was stable during 189 days of detection. Notably, the effluent can be reused directly, or reused after further treatment. The zero discharge of effluents and solid wastes was realized in the processes. The above results provided supports for the engineering treatment of cyanide tailings. [Display omitted] [ABSTRACT FROM AUTHOR]

The wide use of metal-based nanoparticles (MNPs) will inevitably lead to their release into soil, and consequently affect the quality and ecological functions of soil environments. In this study, two paddy soils with different properties were exposed to CuO NPs to evaluate the transformation of CuO NPs and their effects on soil properties and components. The results of single chemical extraction and X-ray absorption fine structure analysis showed that CuO NPs could release Cu ions once being applied into the flooding paddy soil and then progress toward the more stable forms (Cu2S and Cu(OH)2). CuO NPs could change the soil properties by increasing the pH and Eh of the lower organic matter-soil rather than those of the higher organic matter-soil. Furthermore, we found that the 1000 mg/kg CuO NPs could accelerate the degradation or mineralization of the organic matter, as well as the Fe reduction process, by increasing the Fe(II) content by 293% after flooding for 60 days in the lower organic matter soil. The microbial biomass in both soils was severely inhibited by CuO NPs and the organic matter could partly mitigate the negative effects of CuO NPs. [ABSTRACT FROM AUTHOR]

Cyanide tailings are the major hazardous wastes generated in the production process of the gold industry, which not only contain highly toxic cyanide, but also contain heavy metals with recycling value and other substances suitable for building materials or filling. These tailings are in urgent need of purification treatment and safe utilization. In this study, the impacts of treatment methods, types and combinations of reagents on decyanation effect were researched. Gold in cyanide tailings was recovered by flotation, and flotation tailings were used for filling after identifying the properties of solid waste. Results are as follows: (1) INCO method and 5 reagents (sodium sulfite, sodium persulfate, copper sulfate, ferrous sulfate and zinc sulfate) were selected for synergistic decyanation treatment, and cyanide concents in slurry and leaching solution were decreased to the minimum. (2) The gold recovery rate of the tailings through flotation was increased by 27.8% than without detoxification. (3) Flotation tailings were identified as general industrial solid wastes by leaching toxicity and toxic substance content analysis. (4) As filling aggregate, under the conditions of slurry concentration of 63% and cement-sand ratio of 1:6, the strength filling body of flotation tailings reached 1.32 Mpa after 28 days of maintenance. (5) This process and combined reagents were applied to engineering. The cyanide content in the leaching solution and the flotation recovery rate of gold were kept below 0.2 mg/L and above 60% respectively, and the strength of the filling body was stable to meet the requirements of underground filling. [Display omitted] • Different decyanation methods and reagents of cyanide tailings were researched. • Five reagents were screened for decyanation and their interaction mechanism was expounded. • Gold was extracted by flotation after detoxification and the gold recovery rate was much higher than that of non-detoxification. • Flotation tailings were identified as general industrial solid wastes for filling, and filling parameters were explored. • Efficient detoxification and full resource utilization of cyanide tailings were realized and applied to industry. [ABSTRACT FROM AUTHOR]

Penicillium oxalicum SL2 (SL2) is a previously screened Pb-tolerant fungus that can promote crops growth. The relationship between SL2 colonization and Pb immobilization was studied to provide a theoretical basis for microbial remediation of Pb-contaminated paddy soil. In this study, green fluorescent protein (GFP) labeled SL2 was inoculated into different Pb-contaminated paddy soils (S1-S6). The Pb extracted from the soil by HNO 3 , EDTA and CaCl 2 were used to characterize the available Pb. The results showed that the colonization of SL2 was divided into lag phase (0-7 days), growth phase (7-30 days), and mortality phase (30-90 days). SL2 colonized well in sandy soils rich in clay and total phosphorus with initial pH of 4.5-7.0. In addition, SL2 increased soil pH and decreased soil Eh, which was beneficial to immobilize Pb. In different soils, the highest percentages of CaCl 2 -Pb, EDTA-Pb, and HNO 3 -Pb immobilized by SL2 were 34.34%-40.53%, 17.05%-20.11%, and 7.39%-15.62%, respectively. Pearson correlation analysis showed that the percentages of CaCl 2 -Pb and EDTA-Pb immobilized by SL2 were significantly positively correlated with the number of SL2 during the growth phase. SL2 mainly immobilized Pb in the growth phase and a higher peak number of SL2 was beneficial to the immobilization of Pb. [Display omitted] [ABSTRACT FROM AUTHOR]

Most current researches focus solely on reducing soil chromium availability. It is difficult to reduce soil Cr(VI) concentration below 5.0 mg kg-1 using single remediation technology. This study introduced a sustainable soil Cr(VI) reduction and stabilization system, Penicillium oxalicum SL2–nanoscale zero-valent iron (nZVI), and investigated its effect on Cr(VI) reduction efficiency and microbial ecology. Results showed that P. oxalicum SL2–nZVI effectively reduced soil total Cr(VI) concentration from 187.1 to 3.4 mg kg–1 within 180 d, and remained relatively stable at 360 d. The growth curve of P. oxalicum SL2 and microbial community results indicated that γ-ray irradiation shortened the adaptation time of P. oxalicum SL2 and facilitated its colonization in soil. P. oxalicum SL2 colonization activated nZVI and its derivatives, and increased soil iron bioavailability. After restoration, the negative effect of Cr(VI) on soil microorganisms was markedly alleviated. Cr(VI), Fe(II), bioavailable Cr/Fe, Eh, EC and urease (SUE) were the key environmental factors of soil microbiota. Notably, Penicillium significantly stimulated the growth of urease-positive bacteria, Arthrobacter , Pseudarthrobacter , and Microvirga , synergistically reducing soil chromium availability. The combination of P. oxalicum SL2 and nZVI is expected to form a green, economical and long-lasting Cr(VI) reduction stabilization strategy. [Display omitted] • P. oxalicum SL2–nZVI effectively reduced soil total Cr(VI) and available chromium. • Gamma-ray irradiation pretreatment facilitated P. oxalicum SL2 colonization in soil. • The negative effect of Cr(VI) on soil microorganisms was mitigated after remediation. • Cr- and Fe- related indicators, Eh, EC and SUE were the key environmental factors. • Penicillium colonization significantly stimulated the growth of urease-positive bacteria. [ABSTRACT FROM AUTHOR]

Oxidation remediation is a commonly used technology for PAHs contaminated soil presently, but the overestimate of efficiency due to ongoing remediation by residual oxidants during extraction and testing has not been paid enough attention. In this study, persulfate was activated by Fe(II) to investigate the effects of residual oxidants on PAHs removal during detection process and the elimination effects of adding Na 2 SO 3 and extending sampling time on residual oxidants. Results verified that the residual oxidants removed PAHs in extraction process, making the results lower than the actual values: the detection recovery rate η of ∑PAHs and 3-6 ring PAHs ranged from 24.3% (25% Na 2 S 2 O 8 treatment) to 87.4% (5% Na 2 S 2 O 8 +4/4Fe2+ treatment), 20.1%-99.0%, 28.9%-87.9%, 20.8%-89.4%, and 18.6%-76.9%, respectively. After adding Na 2 SO 3 , the accuracy of detection results increased significantly: the η of ∑PAHs and 3-6 ring PAHs increased to 64.1%-96.5%, 58.8%-95.5%, 73.8%-114.4%, 60.6%-95.6%, and 45.4%-77.1%, respectively. After 49 days of adding oxidants, residual oxidants had no considerable effect on the detection of PAHs, indicating it was appropriate to start soil remediation verification sampling49 days after the remediation was completed. The observed results will help scientific evaluation of the remediation effects of chemical oxidation on organic contaminated soil. [Display omitted] [ABSTRACT FROM AUTHOR]

[Display omitted] • The sources, preparation, modification, and environmental remediation applications of biochar have been discussed in detail. • The application of biochar activated persulfate for pollutant removal in water and soil has been extensively discussed. • The mechanism of biochar activation of persulfate has been extensively discussed. • DFT calculations are used to explain the mechanism of action of biochar and the microscopic activities of catalytic adsorption processes. Soil and water environmental pollution continues to pose a substantial threat, accounting for approximately 30 % of all global environmental issues. Among the various remediation strategies, biochar, characterized by its exceptional porous structure, a specific surface area ranging from 500 to 1500 m2/g, and a diverse array of functional groups, stands as a highly effective adsorbent and catalytic material. It has been extensively applied in environmental restoration efforts. Notably, in recent years, the technology involving biochar-activated persulfate (PS) has garnered significant attention, accounting for over 20 % of all published research in this field. A detailed discussion was conducted on the preparation methods of biochar, the research progress and mechanism of activating PS to remediate organic pollutants in soil and water by summarizing and refining relevant research. Specifically, the application of Density Functional Theory (DFT) calculations in elucidating the interaction mechanisms between biochar and PS has been thoroughly investigated, uncovering the electron transfer process between the functional groups on the biochar surface and PS, thus facilitating the degradation of organic pollutants. Moreover, this article also explores the challenges and future directions of the biochar-activated PS technology in practical applications, aiming to offer new insights and methods for the restoration of soil and water environments. It provides a theoretical foundation for further exploration of its mechanism of action and the optimization of application conditions. [ABSTRACT FROM AUTHOR]

Cd contamination in rice urgently needs to be addressed. Nano hydroxyapatite (n-HAP) is an eco-friendly material with excellent Cd fixation ability. However, due to its own high reactivity, innovative application of n-HAP in the treatment of Cd contamination in rice is needed. In this study, we proposed a new application, namely n-HAP pre-treatment, which can effectively reduce Cd accumulation in rice and alleviate Cd stress. The results showed that 80 mg/L n-HAP pre-treatment significantly reduced Cd content in rice shoot by 35.1%. Biochemical and combined transcriptomic-proteomic analysis revealed the possible molecular mechanisms by which n-HAP pre-treatment promoted rice growth and reduced Cd accumulation. (1) n-HAP pre-treatment regulated gibberellin and jasmonic acid synthesis-related pathways, increased gibberellin content and decreased jasmonic acid content in rice root, which promoted rice growth; (2) n-HAP pre-treatment up-regulated gene CATA1 expression and down-regulated gene OsGpx1 expression, which increased rice CAT activity and GSH content; (3) n-HAP pre-treatment up-regulated gene OsZIP1 expression and down-regulated gene OsNramp1 expression, which reduced Cd uptake, increased Cd efflux from rice root cells. [Display omitted] • n-HAP pre-treatment could effectively reduce Cd accumulation in rice seedlings. • n-HAP pre-treatment modulated gibberellin and jasmonic acid synthesis pathways. • n-HAP pre-treatment regulated the expression of gene CATA1 and OsGpx1. • n-HAP pre-treatment influenced Cd transport related gene OsZIP1 and OsNramp1. [ABSTRACT FROM AUTHOR]

Abstract: Soil microorganisms may play an important role in the uptake of heavy metals from soils. However, assessments of bacterial activity and community composition in the rhizosphere of accumulators have been largely ignored. We studied potential effects of a copper (Cu)-accumulator, Elsholtzia splendens, and a non-Cu-accumulator plant, Trifolium repens, on soil microbial activity and community composition with increasing Cu addition. The results showed that concentrations of Cu in the shoots of E. splendens were 2.1, 2.2 and 2.4 times those of T. repens under the treatment of different Cu concentrations. Soil microbial biomass and phosphatase activity in the rhizosphere of E. splendens were higher than those of T.repens. PCR-denaturing gradient gel electrophoresis (PCR-DGGE) fingerprint analysis revealed that addition of Cu decreased the number of bands in bare soil and soil with T. repens. However, there was a significant increase in the number of bands in soil with E. splendens incorporated with either 200 or 500mgkg−1 Cu. The abundances of five phylogenetic groups related most closely to α-, β-, γ-proteobacteria, Gram-positive bacteria and CFB group, respectively, were determined in the rhizosphere of plants. Some specific clone such as E13 (metal-contaminated soil clone K20-64) was found in the rhizosphere of E. splendens. Results indicated that E. splendens, as a Cu-accumulator, played an important role in governing soil microbial activity and bacterial community composition in the rhizosphere in response to Cu stress. [Copyright &y& Elsevier]

Abstract: Bacterial–mineral composites are important in the retention of heavy metals due to their large sorption capacity under a wide range of environmental conditions. This study provides the first quantitative comparison of the metal-binding capacities of P. putida CZ1–goethite composite to its individual components. When the same amount (on a dry weight basis) of living and nonliving cells of P. putida CZ1, goethite or their composites was separately exposed to solutions of 0.5mM Cu(II) and Zn(II) in 0.01M KNO3, the living cells removed the largest quantity of heavy metals. The results of calculated metal retention values indicated that the adsorption of goethite to bacteria has not mask or neutralize chemically reactive adsorption sites normally available to metal ions. Moreover, the nonliving cells–goethite composite retained approximately 82% more Zn than that predicted by their individual behavior. The preferential association of Zn with P. putida CZ1 was observed by TEM and EDS analyses of a mixture consisting of the bacteria and goethite. Desorption of Cu and Zn with 1.0M CH3COOK solution from P. putida CZ1 and goethite indicated the differences in the functional groups able to bind heavy metals. [Copyright &y& Elsevier]

The effects of manganese (Mn) on the growth and Mn-induced changes in nutrients uptake and translocation in Mn hyperaccumulator Phytolacca acinosa was investigated in this study. Results showed that high Mn (5000 μ M) in culture solution lead to typical Mn toxicity symptoms in leaves of P. acinosa and decrease of dry matter accumulation in shoots whereas there are no obvious toxicity symptoms and significant decrease of dry weight in roots. Manganese accumulation in roots, stems, and leaves increased with the increment of Mn concentration at the medium level. Calcium (Ca), magnesium (Mg), and iron (Fe) concentration in organs of P. acinosa decreased as the Mn concentration in the nutrient solution increased, but the Ca and Mg concentrations were still at a normal level and the Fe concentration at a sufficient level when compared with the normal plants. The Zn concentration affected by higher Mn level occurred only in roots of P. acinosa and the P concentration affected only in stems, whereas there were no significant influences of excess Mn on the potassium (K) and copper (Cu) concentration in organs of P. acinosa. [ABSTRACT FROM AUTHOR]

Abstract: The adsorption and desorption processes of Cu(II) and Zn(II) on the biomass of Pseudomonas putida CZ1 as a function of particle concentrations (C p) were studied. In a 0.01M KNO3 solution, the Cu-biomass and Zn-biomass adsorption systems displayed a clear C p effect. The overall adsorption isotherms under three C p conditions could be described as a Freundlich-type C p effect isotherm equation: for Cu-biomass system, for Zn-biomass system. The results of experiments, designed to eliminate several typical sources of experimental artifact, agree with the prediction of the metastable-equilibrium adsorption theory. Results from laboratory equilibration studies also indicate that biomass-adsorbed Cu(II) or Zn(II) fractions may be comprised of both reversibly and strongly bound or resistant components. A computational method has been derived to allow prediction of the magnitude of the reversible and more strongly adsorbed Cu(II) or Zn(II) fractions from conventional isotherm data. This methodology provides an initial quantitative approximation of the strongly bound, resistant, biomass fractions while utilizing relatively simple experimental adsorption–desorption data. [Copyright &y& Elsevier]

Passivation of nanoscale zerovalent iron hinders its efficiency in water treatment, and loading another catalytic metal has been found to improve the efficiency significantly. In this study, Cu/Fe bimetallic nanoparticles were prepared by liquid-phase chemical reduction for removal of hexavalent chromium (Cr(VI)) from wastewater. Synthesized bimetallic nanoparticles were characterized by transmission electron microscopy, Brunauer–Emmet–Teller isotherm, and X-ray diffraction. The results showed that Cu loading can significantly enhance the removal efficiency of Cr(VI) by 29.3% to 84.0%, and the optimal Cu loading rate was 3% (wt%). The removal efficiency decreased with increasing initial pH and Cr(VI) concentration. The removal of Cr(VI) was better fitted by pseudo-second-order model than pseudo-first-order model. Thermodynamic analysis revealed that the Cr(VI) removal was spontaneous and endothermic, and the increase of reaction temperature facilitated the process. X-ray photoelectron spectroscopy (XPS) analysis indicated that Cr(VI) was completely reduced to Cr(III) and precipitated on the particle surface as hydroxylated Cr(OH)3 and CrxFe1−x(OH)3 coprecipitation. Our work could be beneficial for the application of iron-based nanomaterials in remediation of wastewater. [ABSTRACT FROM AUTHOR]

Lead (Pb) is a typical toxic heavy metal element in soils and plants, which has a potential threat to human health through the food chain. Uptake of Pb in the soil–vegetable system has attracted broad attention, whereas reports on the main controlling factors of Pb uptake and accumulation in different soil–vegetable systems are limited. The effect of soil properties on Pb uptake and accumulation in pepper (Capsicum annuum L.) was studied by a pot experiment with 16 typical soils in China. The results showed that the Pb bioavailability was lower in alkaline soils, and that soil cation exchange capacity (CEC), CaCO3, and total phosphorus contents might influence the uptake and transfer of Pb by peppers. Soil pH and CEC were the most significant factors affecting Pb accumulation in pepper fruits. Soil pH was negatively correlated with Pb uptake and accumulation due to its influence on Pb mobility and bioavailability. The accumulation of Pb decreased as soil CEC increased, which might inhibit the absorption and transfer of Pb in peppers. The multiple linear regression function based on soil Pb content, pH, and CEC could provide enough information for a good prediction of the accumulation of Pb in soil–pepper systems (R2 = 0.733). The results are in favor of developing a Pb threshold for vegetables in agricultural soils in China, thus improving the food safety of crops. Environ Toxicol Chem 2021;40:1443–1451. © 2021 SETAC [ABSTRACT FROM AUTHOR]

Cadmium (Cd) contamination in paddy soil has become a worldwide concern and severely endangered human health. Nano hydroxyapatite (n-HAP) is a practical material to manage paddy Cd pollution, but its dosage should not be excessive. Based on previous studies, we validated the effect of n-HAP pre-treatment on rice Cd uptake in pot and field experiments. The results indicated that n-HAP pre-treatment effectively restricted Cd translocation in the soil-rice system. In pot experiment, when soil n-HAP concentration was 5000 mg/kg, the Cd content in the grains of n-HAP pre-treated rice was 0.171 mg/kg, decreased by 29.3% compared with normal rice (0.242 mg/kg). In field experiment, when soil n-HAP concentration was 20,000 mg/kg, the Cd content in the grains of n-HAP pre-treated rice was 0.156 mg/kg, decreased by 35.3% compared with normal rice (0.241 mg/kg). The primary mechanism was that n-HAP pre-treatment altered the formation and composition of iron plaque and therefore enhanced the Cd binding ability of iron plaque. The available N and P content and urease activity in paddy field were increased. We further investigated the impact of n-HAP on the diversity and structure of paddy microbial communities. The Chao1 and Shannon diversity indices showed no significant difference. The relative abundance of Actinobacteria and Proteobacteria was significantly decreased by n-HAP, indicating that Cd pollution might be alleviated. Desulfobacterota , Gemmatimonadota , and Geobacteraceae were significantly enriched by n-HAP. The declining relative abundance of Basidiomycota and the increasing relative abundance of other fungal taxa also suggested that n-HAP could alleviate Cd toxicity in soil. [Display omitted] • n-HAP pre-treatment reduced Cd accumulation in rice grains effectively. • n-HAP pre-treatment restricted Cd translocation from root to stem by regulating iron plaque formation and composition. • n-HAP significantly increased available N, P content and urease activity in paddy field. • n-HAP did not significantly affect the abundance and diversity of paddy microbial communities but altered their structure. [ABSTRACT FROM AUTHOR]

Cyanide tailings are the bulk solid waste generated by the production processes of gold mines. Since the highly toxicity of cyanide affects its disposal and comprehensive utilization, a decyanation treatment is needed. However, wide-ranging industrial uses of the current decyanation methods are restricted due to the treatment effects and costs. Based on the natural degradation method, the cyanide treatment effect was enhanced by raising the treatment temperature, increasing the ultraviolet (UV) irradiation and turning the pile periodically. Using the Arrhenius equation, the activation energies of the cyanide hydrolysis reactions were calculated as 52.22 kJ/mol and 34.59 kJ/mol for heating alone and for heating combined with UV irradiation, respectively. At 60 ℃, the cyanide tailings reached the discharge standard (leachate, total cyanide (CNt)< 5 mg/L) after 8 h of treatment. Moreover, after adding UV irradiation (with an intensity of 120 μW/cm2) and a hydrogen peroxide spray (spraying intensity, 2 mL/kg) to the above conditions and shortening the treatment time to 7 h, the cyanide tailings reached the standard for use in building materials (leachate, CN t <0.5 mg/L). Based on these results, UV irradiation, ventilation, spraying and pile-turning were integrated into the solar drying room to form an enhanced natural degradation system, which was applied in the semi-industrial scale treatment of the cyanide tailings. The results showed that the cyanide tailings consistently met the standards for discharge and use in building materials, successfully verified the conditions and effects of the laboratory treatment, and reduced the treatment cost by more than 50 %. [Display omitted] • Cyanide was mainly distributed in the liquid of the tailings and was removed by volatilization and hydrolysis. • The effects of temperature, UV intensity, turning and reagent spraying on cyanide removal were investigated. • The equation and activation energy of cyanide hydrolysis under heating and UV irradiation were analyzed. • Two methods were designed to meet the different standard requirements for treating cyanide tailings. • Designed an enhanced natural degradation system and completed semi-industrial validation tests. [ABSTRACT FROM AUTHOR]

Fungi Penicillium oxalicum SL2 was applied for Pb 2+ bioremediation in aqueous solution in this study. After 7 days of incubation at different initial concentrations of Pb 2+ (0, 100, 500 and 2500 mg L −1 ), most of Pb 2+ were removed (90, 98.3, and 86.2%), the maximum Pb content in mycelium reached about 155.6 mg g −1  dw. Meanwhile, the formation of extracellular secondary minerals and intracellular Pb-complex were observed and identified, the speciation of Pb in mycelium was also detected by X-ray absorption near-edge structure (XANES) spectroscopy, i.e., Pb-oxalate, Pb-citrate, Pb-hydrogen phosphate and Pb-glutathione analogues. In addition, content of glutathione and oxidized glutathione was increased under the exposure of Pb 2+ , which implied that glutathione might play a key role in Pb immobilization and detoxification in P. oxalicum SL2. This study elucidated partial mechanisms of Pb immobilization and speciation transformation of this strain, providing an alternative biomaterial in the bioremediation of Pb-contaminated wastewater. [ABSTRACT FROM AUTHOR]

Nowadays, Lead (Pb) and Cadmium (Cd) contamination in rice is an important worldwide environmental concern. Fe 3 O 4 nanoparticles (Fe 3 O 4 NPs) and Nano hydroxyapatite (n-HAP) are promising materials to manage Pb and Cd contamination. This study systematically investigated the effect of Fe 3 O 4 NPs and n-HAP on Pb and Cd stressed rice seedlings' growth, oxidative stress, Pb and Cd uptake and subcellular distribution in roots. Furthermore, we clarified the immobilization mechanism of Pb and Cd in the hydroponic system. Fe 3 O 4 NPs and n-HAP could reduce Pb and Cd uptake of rice mainly through decreasing Pb and Cd concentrations in culture solution and combining with Pb and Cd in root tissues. Pb and Cd were immobilized by Fe 3 O 4 NPs through complex sorption processes and by n-HAP through dissolution-precipitation and cation exchange, respectively. On the 7th day, 1000 mg/L Fe 3 O 4 NPs reduced the contents of Pb and Cd in shoots by 90.4% and 95.8%, in roots by 23.6% and 12.6%, 2000 mg/L n-HAP reduced the contents of Pb and Cd in shoots by 94.7% and 97.3%, in roots by 93.7% and 77.6%, respectively. Both NPs enhanced the growth of rice seedlings by alleviating oxidative stress and upregulating glutathione secretion and antioxidant enzymes activity. However, Cd uptake of rice was promoted at certain concentrations of NPs. The subcellular distribution of Pb and Cd in roots indicated that both NPs decreased the percentage of Pb and Cd in the cell wall, which was unfavorable for Pb and Cd immobilization in roots. Cautious choice was needed when using these NPs to manage rice Pb and Cd contamination. [Display omitted] • Fe 3 O 4 NPs immobilized Pb and Cd through complex sorption processes. • n-HAP immobilized Pb and Cd through dissolution-precipitation and cation exchange. • Cd accumulation in rice roots could increase due to using Fe 3 O 4 NPs and n-HAP. • Fe 3 O 4 NPs and n-HAP decreased the percentage of Pb and Cd in the cell wall. [ABSTRACT FROM AUTHOR]

As a potential bioremediation strain for Pb contamination, Penicillium oxalicum SL2 sometimes has secondary activation of Pb, so it is crucial to clarify its effect on Pb morphology and its intracellular response to Pb stress. We investigated the effect of P. oxalicum SL2 in medium on Pb2+ and Pb availability in eight minerals, and revealed the prioritization of Pb products. (i)Pb was stabilized within 30 days as Pb 3 (PO 4) 2 or Pb 5 (PO 4) 3 Cl with sufficient phosphorus (P); (ii) under P deficiency but sulfur (S) sufficient, Pb was stabilized mainly in the form of PbSO 4 ; (iii) under conditions of P and S deficiency, Pb was stabilized mainly in the form of PbC 2 O 2. With the help of proteomic and metabolomics analysis, a total of 578 different proteins and 194 different metabolites were found to be matched in 52 pathways. Among them, the activation of chitin synthesis, oxalate production, sulfur metabolism and transporters improved the Pb tolerance of P. oxalicum SL2, and promoted the synergistic effect of extracellular adsorption, bio-precipitation and transmembrane transport on Pb stabilization. Our results fill the gap in the intracellular response of P. oxalicum SL2 to Pb and provide new insights into the development of bioremediation agent and technology for Pb contamination. [Display omitted] • Pb was stabilized within 30 days by P. oxalicum SL2. • The activation of chitin synthesis pathway enhanced extracellular Pb adsorption. • Pb was stabilized as Pb 3 (PO 4) 2 or Pb 5 (PO 4) 3 Cl with sufficient P. • Pb was mainly precipitated in the forms of PbC 2 O 2 and PbSO 4 under P deficiency. • Changes in transporters such as ABC and MFS regulated Pb subcellular distribution. [ABSTRACT FROM AUTHOR]

[Display omitted] • 10 μM Erythrosine reduced the coronavirus titer by more than 99.999% within 30 min. • Erythrosine inactivated the virus by producing singlet oxygen induced by light. • The color loss of erythrosine can indicate the complete inactivation of the virus. • The filtration efficiency of the mask remained at > 95% after erythrosine treatment. The global health crisis caused by the COVID-19 pandemic has led to a surge in demand and use of personal protective equipment (PPE) such as masks, putting great pressure on social production and the environment. It is urgent to find an efficient and non-destructive disinfection method for the safe reuse of PPE. This study proposes a PPE disinfection method that uses erythrosine, a U.S. Food and Drug Administration-approved food dye, as photosensitizer to produce singlet oxygen for virus inactivation, and indicates the completion of disinfection by its photobleaching color change. After spraying 100 μL of 10 μM erythrosine on the surface of the mask for 3 times and light exposure for 25 min, the titer of coronavirus decreased by more than 99.999%, and the color of erythrosine on the mask surface disappeared. In addition, the structure of the mask was intact and the filtration efficiency was maintained at > 95% after 10 cycles of erythrosine treatment. Therefore, this disinfection method can provide at least 10 cycles of reuse with the advantages of high safety and convenient, and the completion of disinfection can be indicated by its photobleaching, which is suitable for hospitals and daily life to reduce the consumption of PPE. [ABSTRACT FROM AUTHOR]

Removal of toxic Cr(VI) by microbial reduction is a promising approach to reducing its ecotoxicological impact. To develop bioremediation technologies, many studies have evaluated the application of microorganisms isolated from Cr(VI)-contaminated sites. Nonetheless, little attention has been given to microbes from the environments without a history of Cr(VI) contamination. In this study, we aimed to characterize the Cr(VI) tolerance and removal abilities of a filamentous fungus strain, SL2, isolated from indoor air. Based on phenotypic characterization and rDNA sequence analysis, SL2 was identified as Penicillium oxalicum, a species that has not been extensively studied regarding Cr(VI) tolerance and reduction abilities. SL2 showed high tolerance to Cr(VI) on solid and in liquid media, facilitating its application to Cr(VI)-contaminated environments. Growth curves of SL2 in the presence of 0, 100, 400, or 1000 mg/L Cr(VI) were well simulated by the modified Gompertz model. The relative maximal colony diameter and maximal growth rate decreased as Cr(VI) concentration increased, while the lag time increased. SL2 manifested remarkable efficacy of removing Cr(VI). Mass balance analysis indicated that SL2 removed Cr(VI) by reduction, and incorporated 0.79 mg of Cr per gram of dry biomass. In electroplating wastewater, the initial rate of Cr(VI) removal was affected by the initial contaminant concentration. In conclusion, P. oxalicum SL2 represents a promising new candidate for Cr(VI) removal. Our results significantly expand the knowledge on potential application of this microorganism. [ABSTRACT FROM AUTHOR]

Agricultural soil is gradually becoming a primary sink for metal-based nanoparticles (MNPs). The uptake and accumulation of MNPs by crops may contaminate food chain and pose unexpected risks for human health. Here, we investigated the fate and transformation of CuO nanoparticles (NPs) in the soil-rice system during the rice lifecycle. The results show that at the maturation stage, 1000 mg/kg CuO NPs significantly decreased redox potential by 202.75 mV but enhanced electrical conductivity by 497.07 mS/cm compared to controls. Moreover, the bioavailability of highest CuO NPs in the soil was reduced by 69.84% along with the plant growth but then was significantly increased by 165% after drying-wetting cycles. Meanwhile, CuO and Cu combined with humic acid were transformed to Cu2S and Cu associated with goethite by X-ray absorption near edge structure analysis. Additionally, CuO NPs had an acute negative effect on the plant growth than bulk particles, which dramatically reduced the fresh weight of grains to 6.51% of controls. Notably, CuO NPs were found to be translocated from soil to plant especially to the chaff and promoted the Cu accumulation in the aleurone layer of rice using micro X-ray fluorescence technique, but could not reach the polished rice. [ABSTRACT FROM AUTHOR]

Harmful algal blooms frequently occur globally, and forecasting could constitute an essential proactive strategy for bloom control. To decrease the cost of aquatic environmental monitoring and increase the accuracy of bloom forecasting, a novel single-parameter approach combining wavelet analysis with artificial neural networks (WNN) was developed and verified based on daily online monitoring datasets of algal density in the Siling Reservoir, China and Lake Winnebago, U.S.A. Firstly, a detailed modeling process was illustrated using the forecasting of cyanobacterial cell density in the Chinese reservoir as an example. Three WNN models occupying various prediction time intervals were optimized through model training using an early stopped training approach. All models performed well in fitting historical data and predicting the dynamics of cyanobacterial cell density, with the best model predicting cyanobacteria density one-day ahead ( r = 0.986 and mean absolute error = 0.103 × 10 4 cells mL −1 ). Secondly, the potential of this novel approach was further confirmed by the precise predictions of algal biomass dynamics measured as chl a in both study sites, demonstrating its high performance in forecasting algal blooms, including cyanobacteria as well as other blooming species. Thirdly, the WNN model was compared to current algal forecasting methods (i.e. artificial neural networks, autoregressive integrated moving average model), and was found to be more accurate. In addition, the application of this novel single-parameter approach is cost effective as it requires only a buoy-mounted fluorescent probe, which is merely a fraction (∼15%) of the cost of a typical auto-monitoring system. As such, the newly developed approach presents a promising and cost-effective tool for the future prediction and management of harmful algal blooms. [ABSTRACT FROM AUTHOR]

Sulfur K-edge X-ray absorption near-edge structure spectroscopy and chemical sequential extraction was respectively used to study the speciation of sulfur in two sulfur-rich soils samples. Sulfur K-edge X-ray absorption near-edge structure spectroscopy analysis obtained a variety of spectra. Spectral fitting of the X-ray absorption near-edge structure spectra utilizing a large set of model compounds showed great differences between these two sulfur-rich soil samples. It was found that both of the soil samples had high sulfur content (8.40 and 11.57 g kg−1, respectively). Chemical extraction results suggested that sulfur mainly existed as organic in the ancient paddy soil (7.37 g kg−1) and more reduced sulfur was identified in it. X-ray absorption near-edge structure spectroscopy also got similar results. These organic forms of sulfur existed in organic matter across a range of oxidation states. There was high proportion of oxidized sulfur in the sulfuric acid plant that mainly existed as sulfate. [ABSTRACT FROM AUTHOR]

Oxalic acid is the most abundant low molecular weight organic acid (LMWOA) in many environments and offers enormous prospects for treating Cr(VI) contamination. In this study, laboratory batch experiments were conducted to estimate the roles of oxalic acid in Cr(VI) removal by Penicillium oxalicum SL2. Oxalic acid changed the initial pH and provided a suitable condition for the growth of strain SL2 when the penicillium was applied to bioremediation of Cr(VI) contamination in alkaline soil. Gompertz model analysis indicated that initial pH affected the lag time of the growth curve of strain SL2. Scanning electron microscopy and scanning transmission X-ray microscopy analysis showed strain SL2 sufficiently contacted with contaminated soil and reduced Cr(VI) to Cr(III) in the hyphae. The results suggested that oxalic acid could enhance the bioremediation efficiency of strain SL2 though improving chromium bioleaching from the contaminated soil and strengthening Cr(VI) removal in the leaching solution. This study provided oxalic acid as a green reagent for stimulating Cr(VI) removal by strain SL2 and would expand knowledge on the roles of LMWOA in Cr(VI) bioremediation. [Display omitted] • Gompertz model could simulate the growth curve of strain SL2 under initial pH5 to pH9. • Growth of strain SL2 had a strong correlation with Cr(VI) removal. • Oxalic acid improved chromium bioleaching by strain SL2 from contaminated soil. • Oxalic acid enhanced Cr(VI) removal by strain SL2 in the leaching solution. [ABSTRACT FROM AUTHOR]

The toxic chemical element cadmium (Cd) in paddy fields triggered increasing problems of growth inhibition and food security in rice consistently. In this study, we found Metarhizium robertsii , which is widely used as a bioinsecticide and biofertilizer in agriculture and recently found to be resistant to Cd, developed intraradical and extraradical symbiotic hyphae in rice seedlings, and successfully colonized in the rice rhizosphere soil to more than 103 CFUs g−1 soil at harvesting. M. robertsii colonization significantly reduced Cd accumulations in both hydroponically cultured seedlings and the matured rice cultured in Cd contaminated potting soil (2 ppm). Notably, Cd accumulation reduction of the roots, stems, leaves, husks and grains of the matured rice induced by the fungus were 44.3%, 32.1%, 35.3%, 31.9% and 24.7%, respectively. It was caused by the M. robertsii -induced suppression of Cd intake transporter gene osNramp5 in the rice roots, and the chemical stabilizing of Cd to the residual fraction in the rhizosphere soil. In addition, the colonization of M. robertsii significantly promoted the growth characters and the photosynthesis of the rice plants. This is achieved by the increase of endogenous hormone levels of indole-3-acetic, gibberellin A 3 and brassinolide induced by M. robertsii. Furthermore, the fungus enhanced the antioxidative capacities via increasing enzyme activities of catalase, peroxidase and the production of glutathione, ascorbic acid, proline in the rice plants. Our work provides theoretical basis for expanding the use of M. robertsii as in situ Cd accumulation reduction and detoxification agents for rice in contaminated paddy fields. [Display omitted] • M. robertsii colonized well in the rice roots and the rhizosphere soil. • M. robertsii reduced Cd accumulation and promoted plant growth of rice. • Rice osNramp5 was suppressed and soil Cd ions were stabilized by the fungus. • Endogenous phytohormones IAA, GA 3 and BL were elevated by the fungus. • M. robertsii stimulated antioxidative capacities of rice. [ABSTRACT FROM AUTHOR]

Due to the high migration capacity in agricultural soil-crop systems, cadmium (Cd) is accumulated in various crops and severely inhibits plant growth. In this study, we showed that, under Cd stress, the plant-symbiotic fungus Metarhizium robertsii reduced Cd accumulation in Arabidopsis thaliana shoots and roots by 21.8 % and 23.8 %, respectively. This is achieved by M. robertsii colonization-induced elevation of Cd efflux capacity via upregulation of three PCR genes, which is confirmed by the fact that the extent to which M. robertsii reduced Cd accumulation in the WT plants was greater than the inactivating mutants of the PCR genes. M. robertsii also alleviated Cd-induced leaf etiolation in A. thaliana by increasing the chlorophyll amount and modified plant physiological status to increase Cd stress tolerance via increasing production of catalase, peroxidase and glutathione and upregulating multiple HIPP proteins involved in sequestration of Cd. Notably, consistent with that in A. thaliana , the colonization of M. robertsii also reduced the Cd accumulation in Oryza sativa seedlings by upregulating the PCR gene OsPCR1 , and increased chlorophyll amount and alleviated oxidative stress. Therefore, M. robertsii colonization reduced Cd accumulation in plants, and promoted plant growth and health by elevating Cd efflux capacity and modifying physiological status. [Display omitted] • M. robertsii reduces Cd content in A. thaliana and O. sativa by increasing the PCR genes to elevate the Cd efflux capacity. • Cd-induced leaf etiolation was alleviated and more chlorophyll was produced in plants colonized with M. robertsii. • M. robertsii decreased the oxidation level and increased the total antioxidant capacity in plants. [ABSTRACT FROM AUTHOR]

Microbial remediation is preferred as a clean and cost-effective method for restoring environments polluted by organics. But the biodegradation rates of hydrophobic organic contaminants (HOCs) are usually extremely restricted by their low bioavailability, especially in soil. Here, a physical method (mechanical mixing) and a chemical method (randomly methylated- β -cyclodextrins, RAMEB) were adopted to improve the bioavailability and biodegradation of polychlorinated biphenyls (PCBs) of an aged soil. The bioavailability of tri-CBs was increased by adding RAMEB in soil/slurry or assisting mechanical mixing in slurry, but these methods had no effects on the bioavailability of tetra-CBs and high chlorinated PCBs (Cl > 4). The degradation rate of tri-CBs could be obviously enhanced by adding RAMEB in soil or assisting mechanical mixing in slurry. The highest removal amount of tri-CBs reached 43.8% in 100 d with a first-order decay kinetics constant of 0.0059 d −1 . But the removal of tetra-CBs and high chlorinated PCBs (Cl > 4) were not significant in all mesocosms, possibly due to the lack or weakness of the native degrading microflora. Based on the analysis of the richness and diversity of bacterial communities, the characteristics of the heatmap and the variation of bphC copy numbers in the soil/slurry mesocosms, it could be inferred that there was no obvious corresponding relationship between the variation of the bacterial communities and the physical/chemical measures. [ABSTRACT FROM AUTHOR]

Abstract: The effects of allelochemicals on cyanobacterial blooms have been observed for more than 20 years; however, the use of these compounds, usually involving a “direct-added” mode, has clear disadvantages, such as a short activity period or temporarily excessive localized concentration. Here, a simulated-allelopathy mode to facilitate the application of allelochemicals was proposed and tested on Microcystis aeruginosa . The continuous-release beads of 5,4′-dihydroxyflavone (DHF) were constitutive of a polymer matrix and showed a high drug-loading rate (47.18%) and encapsulation efficiency (67.65%) with a theoretical release time of approximately 120 d. Cyanobacterial growth tests showed that the DHF beads had long-term inhibition effects (>30 d), whereas those of “direct-added” DHF to cells lasted a maximum of 10 d. The beads also continuously affected the superoxide dismutase, catalase, and lipid peroxidation of M. aeruginosa . The inhibitory effects of DHF beads on cyanobacterial growth increased as initial cell densities of M. aeruginosa decreased, suggesting that the beads inhibit cyanobacterial activity more effectively in the early bloom phase. Consequently, the anti-cyanobacterial beads represent a novel application mode of allelochemicals with long-term inhibitory effects on cyanobacterial growth. Our study demonstrates that the successful application of allelochemicals offers great potential to control harmful cyanobacterial blooms, especially at the initial stage of development. [ABSTRACT FROM AUTHOR]

Using manure-derived-biochar as an alternative phosphorus (P) source has bright future prospects to improve soil P status. A 98-day microcosm incubation experiment was set up for two soils which were amended with manure biochar at proportions of 0, 0.5% and 1.5%. Swine manure samples were air-dried and manure biochar was prepared by pyrolysis at 400 °C for 4 h. As determined by P-31 nuclear magnetic resonance ( 31 P NMR) spectroscopy, manure biochar mainly increased the contents and fractions of orthophosphate and pyrophosphate in two soils, while decreased those of monoesters ( P < 0.05). At the end of incubation, 1.5% of manure biochar raised soil pH by 0.5 and 0.6 units, cation exchange capacity by 16.9% and 32.2%, and soil total P by 82.1% and 81.1% for silt loam and clay loam soils, respectively, as compared with those soils without biochar. Simultaneously, 1.5% of manure biochar decreased acid phosphomonoesterase activities by 18.6% and 34.0% for clay loam and silt loam, respectively; while it increased alkaline phosphomonoesterase activities by 28.5% and 95.1% for clay loam and silt loam, respectively. The enhancement of soil P availability after manure biochar addition was firstly due to the orthophosphate and pyrophosphate as the major P species in manure biochar which directly increased contents of soil inorganic P, and also attributed to the decomposition of some organic P like monoesters by enhanced alkaline phosphomonoesterase activities from manure biochar addition. [ABSTRACT FROM AUTHOR]

As the biogeochemical cycling of S in soil is closely associated with the mobility and bioavailability of heavy metals, in this study, we investigated the influence of S fertilization (S and SO) in paddy soils on rice growth, iron plaque formation over root surface, and Cu speciation of rice rhizosphere soil under flooding conditions. The dry weight and height of rice plants increased significantly after S fertilization, indicating that S fertilization of Cu-contaminated paddy soils can enhance rice growth. Sulfur fertilization (less than 500 mg/kg) promoted the formation of iron plaque, thus sequestering a large amount of Cu on root surface and decreasing the bioavailability of Cu by inducing transformation of Cu bioavailable fractions (exchangeable, carbonate oxides, or iron and manganese oxide bound to Cu) to Cu bound to organic matter. Copper K-edge X-ray absorption near-edge structure (XANES) revealed that S fertilization increased the percentage of Cu present as CuS and Cu-cysteine in rice rhizosphere soil, thus reducing Cu mobility. As Cu concentration in rice plants decreased and the biomass of rice plants increased after S fertilization, it can be suggested that S fertilization may be an effective approach for managing Cu-contaminated paddy soils. [ABSTRACT FROM AUTHOR]

Programmed cell death (PCD) in root border cells (RBCs) induced by Copper (Cu) has been little studied. This study explored whether Cu induced PCD in RBCs of cucumber or not and investigated the possible mechanisms. The results showed that the percentage of apoptotic and necrotic RBCs increased with increasing concentration of Cu treatment. A quick burst of ROS in RBCs was detected, while mitochondrial membrane potential (Δ Ψ m ) decreased sharply with Cu treatment. Caspase-3 like protease activity showed a tendency of increase with Cu treatment. The potential of Cu to induce PCD in RBCs of cucumber was first proved. Our results showed that ROS generation and mitochondrial membrane potential loss played important roles in Cu-induced caspase-3-like activation and PCD in RBCs of cucumber, which provided new insight into the signaling cascades that modulate Cu phytotoxicity mechanism. [ABSTRACT FROM AUTHOR]

A Cr(VI)-reducing bacteria ( Pseudochrobactrum saccharolyticum LY10) was selected to simulate the biofilm grown in unsaturated habitats containing Cr(VI) and the X-ray fluorescence and absorption methods were used to characterize the temporal and spatial distributions of metal elements in the unsaturated biofilms in the present study. The results indicated that Cr and other elements (Fe, Mn, Ca, K, and Zn) were selectively accumulated in the unsaturated biofilms. Synchrotron radiation micro X-ray fluorescence microscopy (SR-μXRF) analysis revealed that Cr mainly existed in the 10–45 μm layer near the bottom biofilm–membrane interface after 24 h of Cr exposure. The analysis of Cr speciation by X-ray absorption near-edge structure (XANES) spectroscopy analysis further confirmed the bioreduction of Cr(VI) to Cr(III), and the precipitate formed in the biofilms after reduction were most similar to CrPO 4 . This systematic understanding of the accumulation, distribution and reduction process of Cr in the unsaturated biofilms will elaborate to enhance the bioremediation efficiencies for Cr pollution in soil and other environment. [ABSTRACT FROM AUTHOR]

Natural organic matter (NOM) can interact with engineered nanoparticles (NPs) in the environment and modify their behavior and toxicity to organisms. In the present study, the phytotoxicity of copper oxide (CuO) NPs to rice seedlings in the presence of humic acid as a model NOM was investigated. The results showed that CuO NPs induced the inhibition of root elongation, aberrations in root morphology and ultrastructure, and losses of cell viability and membrane integrity. The adverse effects partly resulted from the generation of reactive oxygen species caused by CuO NPs, which led to lipid peroxidation, mitochondrial dysfunction, and programmed cell death in rice seedlings. However, all the phytotoxicity was alleviated with the addition of humic acid because humic acid coatings on nanoparticle surfaces enhanced electrostatic and steric repulsion between the CuO NPs and the plant cell wall/membrane, reducing contact between NPs and plant and CuO NP-induced oxidative damage to plant cells. The present study's results shed light on the mechanism underlying NP phytotoxicity and highlight the influence of NOM on the bioavailability and toxicity of NPs. Environ Toxicol Chem 2015;34:1996-2003. © 2015 SETAC [ABSTRACT FROM AUTHOR]

Engineered nanoparticles (NPs) and natural organic matter (NOM) in the environment may interact with background contaminants such as heavy metals and modify their bioavailability and toxicity. In the present study, the combined influences of 2 common NPs (TiO2 and CeO2) and humic acid (HA; as a model NOM) on Cu(II) phytotoxicity to rice were investigated by a 3-d root elongation assay performed on filter paper media. The results showed that the adsorption coefficients of bare TiO2 and CeO2 NPs (100 mg/L) toward Cu2+ are 2.65 and 4.37, respectively, at an initial concentration of 10 mg/L, suggesting that Cu(II) could be strongly adsorbed by NPs, whereas HA-coated TiO2 and CeO2 NPs further enhanced the adsorption coefficients to 4.37 and 6.85, respectively. In addition, compared with Cu-alone treatment, the addition of bare TiO2 and CeO2 NPs (1000 mg/L) increased the length of rice root by 32.5% and 39.0%, respectively; however, the presence of HA-coated TiO2 and CeO2 NPs increased the root length by 90.2% and 100.1%, respectively, which indicated that the mitigation effect of HA-coated NPs on Cu(II) phytotoxicity was more visible than that of bare NPs. The results demonstrated that coexistence of NPs and HA significantly alleviated Cu(II) phytotoxicity as a result of a decrease in bioavailable soluble Cu(II) concentration, which contributes to an understanding of the potential behavior of NPs in the environment. Environ Toxicol Chem 2015;34:1588-1596. © 2015 SETAC [ABSTRACT FROM AUTHOR]

Impact of S fertilization on Cu mobility and transformation in contaminated paddy soils has been little reported. In this study, we investigated the dynamics and transformation of dissolved and colloidal Cu in the pore water of a contaminated paddy soil after applying ammonium sulphate (AS) and sulfur coated urea (SCU) with various flooding periods (1, 7 and 60 days). Compared to the control soil, the AS-treated soil released more colloidal and dissolved Cu over the entire flooding period, while the SCU-treated soil had lower colloidal Cu after 7-day flooding but higher colloidal and dissolved Cu after 60-day flooding. Microscopic X-ray fluorescence (μ-XRF) analysis found a close relationship between Fe and Cu distribution on soil colloids after 60-day flooding, implying the formation of colloidal Fe/Cu sulphide coprecipitates. Cu K-edge X-ray absorption near-edge structure (XANES) spectroscopy directly revealed the transformation of outer-sphere complexed Cu(II) species to Cu(II) sulphide and reduced Cu 2 O in the colloids of S-treated soils after 60-day flooding. These results demonstrated the great influence of S fertilization on pore-water Cu mobility by forming Cu sulphide under flooding conditions, which facilitated our understanding and control of Cu loss in contaminated paddy soils under S fertilization. [ABSTRACT FROM AUTHOR]

Biphenyl and polychlorinated biphenyls (PCBs) are typical environmental pollutants. However, these pollutants are hard to be totally mineralized by environmental microorganisms. One reason for this is the accumulation of dead-end intermediates during biphenyl and PCBs biodegradation, especially benzoate and chlorobenzoates (CBAs). Until now, only a few microorganisms have been reported to have the ability to completely mineralize biphenyl and PCBs. In this research, a novel bacterium HC3, which could degrade biphenyl and PCBs without dead-end intermediates accumulation, was isolated from PCBs-contaminated soil and identified as Sphingobium fuliginis. Benzoate and 3-chlorobenzoate (3-CBA) transformed from biphenyl and 3-chlorobiphenyl (3-CB) could be rapidly degraded by HC3. This strain has strong degradation ability of biphenyl, lower chlorinated (mono-, di- and tri-) PCBs as well as mono-CBAs, and the biphenyl/PCBs catabolic genes of HC3 are cloned on its plasmid. It could degrade 80.7% of 100 mg L −1 biphenyl within 24 h and its biphenyl degradation ability could be enhanced by adding readily available carbon sources such as tryptone and yeast extract. As far as we know, HC3 is the first reported that can degrade biphenyl and 3-CB without accumulation of benzoate and 3-CBA in the genus Sphingobium, which indicates the bacterium has the potential to totally mineralize biphenyl/PCBs and might be a good candidate for restoring biphenyl/PCBs-polluted environments. [ABSTRACT FROM AUTHOR]

Background and Aims: Copper (Cu) is an essential micronutrient for plants. However, excess amounts of Cu are toxic and result in a wide range of harmful effects on the physiological and biochemical processes of plants. Cell wall has a crucial role in plant defense response to toxic metals. To date, the process of cell wall response to Cu and the detoxification mechanism have not been well documented at the proteomic level. Methods: An recently developed 6-plex Tandem Mass Tag was used for relative and absolute quantitation methods to achieve a comprehensive understanding of Cu tolerance/detoxification molecular mechanisms in the cell wall. LC–MS/MS approach was performed to analyze the Cu-responsive cell wall proteins and polysaccharides. Key Results: The majority of the 22 up-regulated proteins were involved in the antioxidant defense pathway, cell wall polysaccharide remodeling, and cell metabolism process. Changes in polysaccharide amount, composition, and distribution could offer more binding sites for Cu ions. The 33 down-regulated proteins were involved in the signal pathway, energy, and protein synthesis. Conclusions: Based on the abundant changes in proteins and polysaccharides, and their putative functions, a possible protein interaction network can provide new insights into Cu stress response in root cell wall. Cu can facilitate further functional research on target proteins associated with metal response in the cell wall. [ABSTRACT FROM AUTHOR]

Background and aims: Metal species in rhizosphere soil profoundly influence their mobility and phytoavailability. Clarifying the speciation transformation of heavy metals helps understand their translocation and accumulation in plants. Methods: Single extraction, selective sequential extraction (SSE) and X-ray absorption near-edge structure (XANES) spectroscopy were employed to investigate the speciation transformation of lead (Pb) and its influence on metal accumulation in tea plants after the addition of tea polyphenols (TPs). Results: Pb content was decreased in young leaves and stems, whereas increased in roots, after TPs were amended to soil. Both SSE and XANES analysis suggested bioavailable Pb was transformed to organically bound Pb after the addition of TPs. The increased percentage of organically bound Pb might be fixed in the cell wall of plant root through a ternary complex formed between the Pb-organic matter complex and cell wall components. Therefore, Pb translocation from roots to young tissues was decreased. Conclusions: Pb phytoavailability change was driven by its speciation transformation after the addition of TPs. Combined SSE and XANES spectroscopy represent powerful tools to study metal speciation transformation in plant and soil systems. [ABSTRACT FROM AUTHOR]

The inhibitory effect of barley straw ( Hordeum vulgare) on cyanobacteria has been observed in many field and laboratory studies for over 30 years, although the compounds responsible for this anti-cyanobacterial effect have remained unknown. In this study, a pair of chiral flavonolignans were isolated from barley straw extract using a bioassay-guided isolation procedure against Microcystis sp. The structures of the allelopathic compounds were elucidated by NMR (nuclear magnetic resonance) and HPLC-MS (high performance liquid chromatography-mass spectrometry), and turned out to be salcolin A and B. The enantiomers differ in their anti-cyanobacterial abilities. Both enantiomers exhibited inhibitory effects on Microcystis sp., and the EC50 (concentration for 50% of maximal effect) of salcolin A and B were 6.02 × 10−5 and 9.60 × 10−5 mol l−1, respectively. Furthermore, the modes of actions of the enantiomers were investigated and compared at a single cell level by flow cytometry. Salcolin A was found to induce an increase on cyanobacterial intracellular ROS (reactive oxygen species) levels and to inhibit esterase activity, whereas salcolin B caused leakages of cyanobacterial cytoplasms. Thus, salcolin A was more 'algistatic', and salcolin B was more 'algicidal'. This study suggests that salcolin is the key allelochemical in barley straw's inhibitory effect on cyanobacteria and could be used as an agent in the future control of cyanobacterial harmful algae blooms. [ABSTRACT FROM AUTHOR]

Support vector machine (SVM) classification models were constructed using a radial basis functions (RBF). These models were used for classification according to dissolved oxygen, permanganate index, ammoniac nitrogen, total nitrogen, or total phosphorus. Cross-validation and grid-search were applied to find satisfactory parameters for RBF for the improved models. Then the improved models were used to assess water quality utilizing a real-world data set (surface water quality monitoring data). The data set was comprised of more than 2,000 water samples representing 172 different sites monitored for one hydrological year. The results showed that the method presented in this paper had excellent performance, and the SVM classification models performed relatively better than the Linear Discriminant Analysis and Quadratic Discriminant Analysis models for classification. [ABSTRACT FROM AUTHOR]