Search

X-ray photoelectron spectroscopy (XPS) has emerged as a technique that allows for characterization and classification of hydrogen bonding and proton transfer interactions in organic crystal structures, in a way that is complementary to crystallography by X-ray or neutron diffraction. Here, we analyze the nitrogen 1s core-level binding energies (BEs) of isonicotinamide (IN) systems with proton transfer between donor and acceptor groups at short distances. We show how a careful calibration of the BE scale places these salt systems correctly on the edge of the so-called salt–cocrystal continuum. We show how performing a fitting analysis of the data that is consistent with elemental analysis, expected stoichiometry, and quantification of adventitious carbon contamination facilitates the determination of absolute BEs with accuracy and reproducibility within ±0.1 eV. The determined N 1s core-level BEs of the protonated IN acceptors suggest that the local geometric arrangements of the donor, acceptor, and proton can influence the N 1s core-level BE significantly.

Short, strong hydrogen bonds (SSHBs) have been a source of interest and considerable speculation over recent years, culminating with those where hydrogen resides around the midpoint between the donor and acceptor atoms, leading to quasi-covalent nature. We demonstrate that X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy provide deep insight into the electronic structure of the short OHN hydrogen bond of 3,5-pyridinedicarboxylic acid, revealing for the first time distinctive spectroscopic identifiers for these quasi-symmetrical hydrogen bonds. An intermediate nitrogen (core level) chemical shift occurs for the almost centrally located hydrogen compared to protonated (ionic) and non-ionic analogues, and it reveals the absence of two-site disorder. This type of bonding is also evident through broadening of the nitrogen 1s photoemission and 1s → 1π* peaks in XPS and NEXAFS, respectively, arising from the femtosecond lifetimes of hydrogen in the potential wells slightly offset to either side of the centre. The line-shape of the core level excitations are thus related to the population occupancies, reflecting the temperature-dependent shape of the hydrogen potential energy well. Both XPS and NEXAFS provide a distinctive identifier for these quasi-symmetrical hydrogen bonds, paving the way for detailed studies into their prevalence and potentially unique physical and chemical properties.

X-ray Raman scattering (XRS) has been used for in situ probing of solute molecule speciation in solution during cooling crystallization. The C and N K-edges of aqueous imidazole were measured as a function of temperature to monitor the transition from the undersaturated state through supersaturation to crystallization. A new jacketed-vessel crystallizer with internal flow was used, which enables thermal control and minimizes radiation damage. We have demonstrated that the C and N K-edges of imidazole are sensitive to changes in local bonding. In line with this, an abrupt change in the N K-edge fine structure indicates the onset of desolvation and crystallization from the supersaturated solution. In contrast, negligible changes are observed in the C and N K-edge spectra acquired during cooling, indicating that the average solvation structure around imidazole molecules does not change significantly while traversing the thermodynamically metastable supersaturated zone. To the best of our knowledge this is the first time X-ray Raman scattering has been used for studying molecular speciation in organic aqueous solutions during crystallization. Time-dependent density functional theory (TD-DFT) calculations of the near-edge spectra were performed using implicit, explicit and combined solvation models to elucidate the likely binding sites of the water molecules. An explicit solvation model with one water molecule coordinating each nitrogen moiety in the imidazole ring accurately reproduces the peak positions and intensities of the XRS spectra of aqueous imidazole solution.

The composition and speciation of the organic and third phases in the system HNO3/TBP (tri-n-butyl phosphate)/n-dodecane have been examined by a combination of gravimetric, Karl Fischer analysis, chemical analysis, FTIR, and 31P NMR spectroscopy, with particular emphasis on the transition from the two-phase to the three-phase region. Phase densities indicate that third-phase formation takes place for initial aqueous HNO3 concentrations above 15 M, while the results from the stoichiometric analysis imply that the organic and third phases are characterized by two distinct species, namely the mono-solvate TBP⋅HNO3 and the hemi-solvate TBP⋅2HNO3, respectively. Furthermore, the 31P NMR spectra of organic and third phase show no significant chemical differences at the phosphorus centers, suggesting that the second HNO3 molecule in the third phase is bound to HNO3 rather than TBP. The third-phase FTIR spectra reveal stronger vibrational absorption bands at 1028, 1310, 1653, and 3200–3500 cm−1, reflecting higher concentrations of H2O, HNO3, and TBP. The molecular dynamics simulation data predict structures in accord with the spectroscopically identified speciation, indicating inequivalent HNO3 molecules in the third phase. The predicted structures of the organic and third phases are more akin to microemulsion networks rather than the distinct, reverse micelles assumed in previous studies. H2O appears to be present as a disordered hydrogen-bonded solvate stabilizing the polar TBP/HNO3 aggregates in the organic matrix, and not as a strongly bound hydrate species in aggregates with defined stoichiometry.

We report the use of XAFS (X-ray absorption fine structure) as an in situ method to follow the electrochemically driven deposition of palladium nanoparticles at a liquid/liquid interface. A novel glass/plastic hybrid electrochemical cell was used to enable control of the potential applied to the liquid/liquid interface. In situ measurements indicate that the nucleation of metallic nanoparticles can be triggered through chronoamperometry or cyclic voltammetry. In contrast to spontaneous nucleation at the liquid/liquid interface, whereby fluctuations in Pd oxidation state and concentration are observed, under a fixed interfacial potential the growth process occurs at a steady rate leading to a build-up of palladium at the interface. Raman spectroscopy of the deposit suggests that the organic electrolyte binds directly to the surface of the deposited nanoparticles. It was found that the introduction of citric acid results in the formation of spherical nanoparticles at the interface.

Energy dispersive extended X-ray absorption fine structure (EDE) has been applied to Pd nanoparticle nucleation at a liquid/liquid interface under control over the interfacial potential and thereby the driving force for nucleation. Preliminary analysis focusing on Pd K edge-step height determination shows that under supersaturated conditions the concentration of Pd near the interface fluctuate over a period of several hours, likely due to the continuous formation and dissolution of sub-critical nuclei. Open circuit potential measurements conducted ex-situ in a liquid/liquid electrochemical cell support this view, showing that the fluctuations in Pd concentration are also visible as variations in potential across the liquid/liquid interface. By decreasing the interfacial potential through inclusion of a common ion (tetraethylammonium, TEA+) the Pd nanoparticle growth rate could be slowed down, resulting in a smooth nucleation process. Eventually, when the TEA+ ions reached an equilibrium potential, Pd nucleation and particle growth were inhibited.

With the advent of high-throughput and imaging core level spectroscopies (including X-ray absorption spectroscopy, XAS, as well as electron energy loss spectroscopy, EELS), automated data processing, visualisation and analytics will become a necessity. As a first step towards these objectives we examined the possibilities and limitations of a simple automated XANES peak fitting procedure written in MATLAB, for the parametrisation of XANES features, including ionisation potentials as well as the energies and intensities of electronic transitions. Using a series of Au L3-edge XANES reference spectra we show that most of the relevant information can be captured through a small number of rules applied to constrain the fits. Uncertainty in this strategy arises mostly when the ionisation potential (IP) overlaps with weak electronic transitions or features in the continuum beyond the IP, which can result in ambiguity through multiple equally good fits.

Au(I) chloride species are important reactants and intermediates in various processes across the chemical sciences and engineering. Structure and bonding in Au(I) species are often characterized by X-ray absorption spectroscopy (XAS), including measurements under reaction conditions. Previously reported XA spectra for Au(I) chloride species have varied significantly, likely as a result of radiation damage and/or partial disproportionation of [AuCl2]− ions, which are metastable under ambient conditions. By monitoring the decomposition of tetrabutylammonium dichloroaurate(I), TBA[AuCl2], in 1,2-dichlorobenzene we have obtained a reliable X-ray absorption spectrum of [AuCl2]− ions by combining the calculation of difference spectra with an extended X-ray absorption fine-structure (EXAFS) determination of the solution composition. The results show that the X-ray absorption near-edge structure (XANES) of [AuCl2]− is characterized by a weak Au 2p3/2 → 5d (‘white line’) transition, which agrees well with the spectrum predicted by electronic structure calculations using the FEFF8 code. Compared to [AuCl4]−, the determined [AuCl2]− spectrum has several distinctive features of diagnostic analytical value. A more detailed densities of states (DOS) analysis of the electronic structure suggests that the weak white line arises from a hybrid Au 6s/5d DOS band that is partially occupied, up to the level of the highest occupied molecular orbital (HOMO). Correlation of Cl coordination numbers determined from the EXAFS with the intensity of the white line in the XANES indicates that the decomposition is a primarily radiation-induced oxidation to Au(III) species with an average formula of [AuCl3OH]−.

The mechanism of the Brust–Schiffrin gold nanoparticle synthesis has been investigated through the use of ion transfer voltammetry at the water/1,2-dichloroethane (DCE) solution interface, combined with X-ray absorption fine structure (XAFS) of the reaction between [AuCl4]− and thiol (RSH) in homogeneous toluene (TL) solution. Ion transfer calculations indicate the formation of [AuCl2]− at RSH/Au ratios from 0.2–2 with a time-dependent variation observed over several days. At RSH/Au ratios above 2 and after time periods greater than 24 h, the formation of Au(I)SR is also observed. The relative concentrations of reaction products observed at the liquid/liquid interface are in excellent agreement with those observed by XAFS for the corresponding reaction in a single homogeneous phase. BH4– ion transfer reactions between water and DCE indicate that the reduction of [AuCl4]− or [AuCl2]− to Au nanoparticles by BH4– proceeds in the bulk organic phase. On the other hand, BH4– was unable to reduce the insoluble [Au(I)SR]n species to Au nanoparticles. The number and size of the nanoparticles formed was dependent on the concentration ratio of RSH/Au, as well as the experimental duration because of the competing formation of the [Au(I)SR]n precipitate. Higher concentrations of nanoparticles, with diameters of 1.0–1.5 nm, were formed at RSH/Au ratios from 1 to 2.

Detailed analysis of the C K near-edge X-ray absorption fine structure (NEXAFS) spectra of a series of saccharides (fructose, xylose, glucose, galactose, maltose monohydrate, α-lactose monohydrate, anhydrous β-lactose, cellulose) indicates that the precise determination of IPs and σ* shape resonance energies is sensitive enough to distinguish different crystalline saccharides through the variations in their average C–OH bond lengths. Experimental data as well as FEFF8 calculations confirm that bond length variations in the organic solid state of 10–2 Å can be experimentally detected, opening up the possibility to use NEXAFS for obtaining incisive structural information for molecular materials, including noncrystalline systems without long-range order such as dissolved species in solutions, colloids, melts, and similar amorphous phases. The observed bond length sensitivity is as good as that originally reported for gas-phase and adsorbed molecular species. NEXAFS-derived molecular structure data for the condensed phase may therefore be used to guide molecular modeling as well as to validate computationally derived structure models for such systems. Some results indicate further analytical value in that the σ* shape resonance analysis may distinguish hemiketals from hemiacetals (i.e., derived from ketoses and aldoses) as well as α from β forms of otherwise identical saccharides.

Aqueous Pb(II) adsorption on pine bark (Pinus Radiata D.Don), an inexpensive and sustainable natural sorbent material, has been evaluated and the mechanism of metal retention characterized by scanning electron microscopy (SEM), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and X-ray photoelectron spectroscopy (XPS). Bark pulp densities >1.5 g l-1 achieve near 100% Pb(II) removal from aqueous solutions containing 100 mg l-1 Pb(II). Adsorption rates increased with pulp density, although adsorption capacity diminished at high densities because of blockage of adsorption sites. The effects of washing and sulfuric acid activation were assessed and found to be less important than in previous metal sorption studies. Pb(II) sorption takes place mainly at the lignocellulosic C-O groups, with adsorption at phenolic sites appearing to be most significant.

Heterogeneous Fenton-like catalysts have received considerable research attention because they could potentially be attractive for oxidative removal of organic contaminants from tertiary wastewater. However, process design is still hampered by insufficient understanding of the chemical pathways involved, and especially whether oxidation activity stems from heterogeneous surface chemistry or minute concentrations of dissolved metal ions in the homogeneous phase. Using inductively coupled plasma-optical emission spectroscopy (ICP-OES) in combination with pH monitoring and ultraviolet–visible spectroscopy (UV–vis) we have monitored the degradation of 4-chlorophenol (4-CP) over two Fenton-like heterogeneous systems, namely FeOx supported on TiO2 and CuFe2O4. We show conclusively that these systems proceed predominantly through a homogeneous route via dissolved metal ions from the solid phase catalysts. Control experiments with homogeneous Fe3+ or Cu2+ systems reveal that even minute concentrations (μM/subppm) of dissolved metal ions leached from the solid phases account for the observed 4-CP degradation rates in the heterogeneous systems. ICP-OES revealed that metal leaching was time-dependent and variable because of pH variations associated with changing acid release rates. Buffering solutions at pH 7.4 suppressed metal leaching (and hence 4-CP degradation) in the FeOx/TiO2 system, but not in others. For example, pH buffering did not entirely suppress metal leaching from CuFe2O4, for which 4-CP degradation was retained through small concentrations of Fe and Cu ions in solution. Our results highlight the importance of careful monitoring of metal content in the aqueous phase, certainly with analytical sensitivity below ppm concentrations of the dissolved metals, and also the crucial influence of time-dependent pH variations on the reaction process. Recyclability of catalysts, pH buffering of solutions or monitoring of metal content in the solid phase by less sensitive analytical methods, for example, chemical analysis, gravimetry, X-ray fluorescence, or energy dispersive X-ray analysis in electron microscopes, cannot exclude the homogeneous Fenton route in the presence of solid catalysts.

Electrochemical gold nucleation and nanoparticle growth at a liquid/liquid interface were examined in situ by combined X-ray fluorescence (XRF) mapping with a microfocus X-ray beam and X-ray absorption fine structure (XAFS) spectroscopy. Gold deposition was achieved by reduction of [AuCl4]− with tri-p-tolylamine at a water/1,2-dichlorobenzene interface using a windowless liquid/liquid interface system formed from the contact of aqueous and organic phase droplets. The combination of XRF and XAFS, with a spatial resolution of approximately 70 μm, provided chemical speciation information near the interface under gold deposition conditions. Analysis of the X-ray absorption near-edge structure (XANES) reveals evidence for the presence of Au(I) species as a reduction intermediate, concomitant with a buildup of metallic gold at the interface. Cyclic voltammetry indicates the presence of two ion transfer peaks at the liquid/liquid interface, which are assigned to the transfer of [AuCl4]− and [AuCl2]−. Finally ex situ TEM analysis shows that the resultant nanoparticles have an average size between 3 and 4 nm. In line with this particle size, the XAFS indicates bulk-like structure.

The sensitivity of near-edge X-ray absorption fine structure (NEXAFS) spectroscopy to Brønsted donation and the protonation state of nitrogen in the solid state is investigated through a series of multicomponent bipyridine–acid systems alongside X-ray photoelectron spectroscopy (XPS) data. A large shift to high energy occurs for the 1s → 1π* resonance in the nitrogen K-edge NEXAFS with proton transfer from the acid to the bipyridine base molecule and allows assignment as a salt (C═NH+), with the peak ratio providing the stoichiometry of the types of nitrogen species present. A corresponding binding energy shift for C═NH+ is observed in the nitrogen XPS, clearly identifying protonation and formation of a salt. The similar magnitude shifts observed with both techniques relative to the unprotonated nitrogen of co-crystals (C═N) suggest that the chemical state (initial-state) effects dominate. Results from both techniques reveal the sensitivity to identify proton transfer, hydrogen bond disorder, and even the potential to distinguish variations in hydrogen bond length to nitrogen.

The α-form of crystalline para-aminobenzoic acid (PABA) has been examined as a model system for demonstrating how the core level spectroscopies X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine-structure (NEXAFS) can be combined with CASTEP density functional theory (DFT) to provide reliable modeling of intermolecular bonding in organic molecular crystals. Through its dependence on unoccupied valence states NEXAFS is an extremely sensitive probe of variations in intermolecular bonding. Prediction of NEXAFS spectra by CASTEP, in combination with core level shifts predicted by WIEN2K, reproduced experimentally observed data very well when all significant intermolecular interactions were correctly taken into account. CASTEP-predicted NEXAFS spectra for the crystalline state were compared with those for an isolated PABA monomer to examine the impact of intermolecular interactions and local environment in the solid state. The effects of the loss of hydrogen-bonding in carboxylic acid dimers and intermolecular hydrogen bonding between amino and carboxylic acid moieties are evident, with energy shifts and intensity variations of NEXAFS features arising from the associated differences in electronic structure and bonding.

Successful interaction between cells and biomaterial surfaces is crucial for biomedical devices, and incorporation of peptides such as RGD (Arg-Gly-Asp) at the polymer interface can substantially promote cell adhesion and proliferation. X-ray photoelectron spectroscopy (XPS) has been used to characterise poly-ε-caprolactone (PCL) films modified by aminolysis and the introduction of RGD peptides via carbodiimide (CDI) and thiol-halogen ‘click’ chemistry. The nitrogen signal acts as an elemental indicator for successful attachment, and changes in the chemical environment are reflected in the carbon and oxygen spectra. Chlorine and sulfur provide additional chemical indicators of reaction progress in the thiol method, with the selective nature of the Cl–S reaction reflected in the complete loss of Cl signal and appearance of S, avoiding potential amine-peptide side-reactions. Comparison of the XPS elemental concentrations indicated an estimate of 2–3% peptide functionalisation on the PCL surface for both methods, correlating with the improvement in Schwann cell response observed after peptide immobilisation. The enhanced selectivity of peptide attachment to the polymer surface demonstrated with XPS for the novel method based on thiol chemistry shows its potential for development as a biomimetic scaffold for peripheral nerve injury.

Significant elemental segregation is shown to exist within individual hollow silver-gold (Ag-Au) bimetallic nanoparticles obtained from the galvanic reaction between Ag particles and AuCl4 -. Three-dimensional compositional mapping using energy dispersive X-ray (EDX) tomography within the scanning transmission electron microscope (STEM) reveals that nanoparticle surface segregation inverts from Au-rich to Ag-rich as Au content increases. Maximum Au surface coverage was observed for nanoparticles with approximately 25 atom % Au, which correlates to the optimal catalytic performance in a three-component coupling reaction among cyclohexane carboxyaldehyde, piperidine, and phenylacetylene.

[This corrects the article DOI: 10.1021/acs.macromol.3c00585.]., (© 2023 The Authors. Published by American Chemical Society.)