Search

The current study focuses on the engine performance and emission analysis of a 4 stroke compression ignition engine powered by medical waste plastic oil (WPO) followed by their optimization study and economic analysis. Engine tests were conducted using WPO blended diesel at various proportions to acquire required data for training the ANN model, which enables better prediction for the engine performance by making use of the standard back-propagation algorithm.Considering supervised data obtained from repeated engine tests, an artificial intelligence-based model of ANN was designed to select different parameters of performance and emission as output layers, at the same time engine loading and different blending ratio of the test fuels were taken as the input layers. The ANN model was built up making use of 80% of testing outcomes for training. The ANN model forecasted engine performance and exhaust emission with regression coefficients (R) at 0.989–0.998 intervals and a mean relative error from 0.002% to 0.348%. Such results illustrated the effectiveness of the ANN model for estimating emissions and the performance of diesel engines. This study demonstrates the use of artificial neural networks (ANNs) to forecast a multi-component fuel mixture, which is novel and reduces the amount of experimental effort required to determine the engine output characteristics. Moreover, the economic viability of the use of 20WPO as an alternative to diesel was justified by thermo-economic analysis.

DFT-calculations allow prediction of the reactivity of uncommon N-heterocyclic scaffolds of pyrazolo[1,5-a]pyrimidines and imidazo[1,2-b]pyridazines and considerably facilitate their functionalization. The derivatization of these N-heterocycles was realized using Grignard reagents for nucleophilic additions to 5-chloropyrazolo[1,5-a]pyrimidines and TMP

Bicyclo[1.1.1]pentane (BCP) replacement as a bioisostere in drug molecules has an influence on their permeability, aqueous solubility and in vitro metabolic stability. Thus, the chemical installation of the BCP unit into a chemical entity remains a significant challenge from a synthetic point of view. Here, we have presented a new approach for the installation of the BCP unit on the xanthate moiety by means of a radical exchange process.

The higher propensity of C-N over C-S bond forming ability was demonstrated, through formal C-H functionalization during the construction of 4,5-disubstituted 1,2,4-triazole-3-thiones from arylidenearylthiosemicarbazides catalyzed by Cu(II). However, steric factors imparted by the o-disubstituted substrates tend to change the reaction path giving thiodiazole as the major or an exclusive product. Upon prolonging the reaction time, the in situ generated thiones are transformed to 4,5-disubstituted 1,2,4-triazoles via a desulfurization process. Two classes of heterocycles viz. 4,5-disubstituted 1,2,4-triazole-3-thiones and 4,5-disubstituted 1,2,4-triazoles can be synthesized from arylidenearylthiosemicarbazides by simply adjusting the reaction time. Desulfurization of 1,2,4-triazole-3-thiones is assisted by thiophilic Cu to provide 1,2,4-triazoles with concomitant formation of CuS and polynuclear sulfur anions as confirmed from scanning electron microscope and energy dispersive X-ray spectroscopy measurements. A one-pot synthesis of an antimicrobial compound has been successfully achieved following this strategy.

An efficient copper‐catalyzed protocol has been developed for the synthesis of carbamates from dialkylformamides and phenols possessing directing groups such as benzothiazole, quinoline and formyl at the ortho‐position. In this chelation assisted approach, C-O bond formation takes place via a Cross Dehydrogenative Coupling (CDC) between the formyl C-H of dialkylformamide and phenolic O-H in the presence of copper(II)acetate/aqueous tert‐butyl hydroperoxide. Under identical reaction conditions, salicylic acid derivatives underwent amidation with the carboxylic group rather than formamidation of the phenolic OH. The use of a cheap and environmentally benign catalyst along with the tolerance of a wide range of functional groups makes this an easy, phosgene‐free route to carbamates.

A unique copper-catalyzed cross-dehydro- genative coupling (CDC) of thiols and alkylbenzenes has been developed for the synthesis of thioesters without the assistance of any directing group. A thio- ester moiety is created via successive CS and CO bond formation at the expense of three sp 3 CH bonds of the alkylbenzene and one sp 3 SH bond of the thiol.

An acyl moiety generated from a-oxocar- boxylic acids via decarboxylation undergoes a palladi- um-catalyzed chemoselective insertion into organic cyanamides to afford N-monosubstituted a-keto- A

A copper-catalyzed cross-dehydrogenative coupling strategy has been developed for the synthesis of two classes of esters from simple solvents. The reaction of methylarenes with cyclic ethers resulted in α-acyloxy ethers involving four sp(3) C-H cleavages, while treatment of methylarenes with cycloalkanes led to the formation of allyl esters at the expense of six consecutive sp(3) C-H bonds.

A variety of styrenes and phenylacetylenes serve as excellent arylcarboxy sources in bringing about substrate directed o-benzoxylation of 2-phenylpyridine derivatives catalyzed by Cu(II) in the presence of TBHP. This reaction proceeds via formation of phenylglyoxal followed by decarbonylation to benzoyl radical/benzaldehyde which acts as the arylcarboxy source.

A Cu(I)-catalysed synthesis of substituted 3-methyleneisoindolin-1-ones using alkynyl acids as an alkyne source has been developed. The reaction involves the decarboxylative cross-coupling of 2-halobenzamides with aryl alkynyl acids, followed by 5-exo-dig heteroannulation. While reactions of 2-iodo benzamides proceeded without a ligand, for 2-bromo substrates, the assistance of a ligand is essential.

Different reactivities and selectivities of Cu and Pd catalysts have been demonstrated in the reactions of benzylamines with 2-phenylpyridines. Although Pd is reported to give o-arylation (ArCO–), Cu introduces an arylcarboxy group (ArCOO–) at the proximal site of the directing group. For the first time benzylamine has been utilised as a synthetic equivalent of an arylcarboxy group.

An efficient metal free oxidative esterification of sp(3) C-H bonds (adjacent to an oxygen atom) in simple solvents like 1,4-dioxane, tetrahydropyran, tetrahydrofuran and ethyl acetate has been achieved using terminal aryl alkenes and alkynes as the ArCOO(-) sources.

Copper(I) catalysts are usually ineffective on the other hand Pd(II) catalysts are quite effective in promoting intramolecular sp 2 C–H functionalization (C–S bond formation). Herein, we have developed a ligand assisted Pd(II) catalyzed C–S bond formation via C–H activation from arylthioureas leading to the formation of 2-aminobenzothiazoles for substrates bearing electron donating (EDG) groups in the aryl ring. However without the assistance of ligand this Pd(II) catalyzed reaction is quite unproductive particularly for thioureas possessing strongly electron donating groups in the aryl rings. Interestingly, the ligand free Cu(II) catalyzed oxidative cyclization of arylthioureas are equally effective both for arylthioureas possessing electron donating as well as electron withdrawing groups in the aryl rings.

An efficient Cu(I)-catalyzed synthesis of 3-aroylindoles has been achieved from o-alkynylated N,N-dimethylamines via a sp(3) C-H bond activation α to the nitrogen atom followed by an intramolecular nucleophilic attack with the alkyne using an aqueous solution of tert-butyl hydroperoxide (TBHP) as the oxidant. In this tandem catalytic synthesis of 3-aroylindoles both C-C and C-O bonds are installed at the expense of two sp(3) C-H bond cleavages.

An efficient protocol has been developed for the direct ortho-hydroxylation of 2-arylbenzothiazole using Pd(OAc)2 as the catalyst and either of DIB/AcOH or Oxone®/TFA combinations under air atmosphere. Under both these conditions, the methodology tolerates a diverse array of substituents giving good to excellent yields of corresponding ortho-hydroxylated products. Regioselective hydroxylation is observed at the less sterically hindered site of the phenyl ring possessing substituents at its meta position.

An efficient protocol for the ortho-aroylation of 2-arylbenzothiazoles and 2-arylbenzoxazoles has been developed using aldehydes as the aroyl source. This Pd-catalyzed substrate-directed sp2-hybridized C–H bond functionalization occurs in the presence of the oxidant tert-butyl hydroperoxide. A variety of functional groups on the 2-arylbenzothiazoles, 2-arylbenzoxazoles, and aldehydes are tolerated under the reaction conditions. Regioselective aroylation at the less hindered ortho position was observed for meta-substituted 2-arylbenzothiazoles.

Oxidative C-O bond formation via sp(3) C-H functionalisation represents an attractive approach for the synthesis of esters. This review focuses on the recent advances of sp(3) C-H bond functionalisation strategies for ester synthesis from unconventional precursors using transition metal/metal free catalysts in combination with various oxidants. Various classes of esters and the mechanisms of their formation are discussed with numerous examples.

An unprecedented aroylation at the ortho C-H bond with respect to a directing group has been accomplished via a Pd(II)-catalyzed cross dehydrogenative coupling approach using alkylbenzene as the synthetic equivalent of an aroyl moiety. The reaction proceeds through sequential C-C and C-O bond making at the expense of four consecutive C-H bond cleavages (three sp(3) benzylic C-H's and one sp(2) arene C-H) to selectively install an aroyl functionality at the proximal site of substrates containing various directing groups.

A tandem and convergent approach to var- ious N-, O-, or S-containing azoles has been devel- oped by exploiting the thiophilic property of cop- per(I) iodide used in a catalytic quantity. The present protocol gives access to amino-substituted tetrazoles, triazoles, oxadiazoles and thiadiazoles via oxidative desulfurization of their respective precursors fol- lowed by inter- or intramolecular attack of suitable nucleophiles. For aminotetrazoles and triazoles an excellent regioselectivity has been achieved through proper tuning of the pKa values of the parent amines attached to unsymmetrical thioureas. The method represents an autocatalytic process in which cop- per(I) iodide gets converted to copper(II) sulfide which in turn transforms to active copper(II) oxide that effectively carries forward the catalytic cycle. The fate of the copper catalyst has also been studied using scanning electron microscopic (SEM) and energy-dispersive X-ray spectroscopic (EDS) analy- ses which give an insight into the mechanism for this catalytic process.

Copper(II) as the catalyst in a cross dehydrogenative coupling (CDC) reaction has been demonstrated for the synthesis of benzylic esters using aldehydes and alkylbenzenes as coupling partners.

A tandem regioselective one-pot synthesis of 3-amino-[1,2,4]-triazoles has been achieved from 1,3-disubstituted thioureas using molecular iodine. In this one-pot strategy, the intermediate carbodiimide generated in situ from thiourea upon reaction with HCONHNH2 gives diaryl/alkylhydrazinecarboximidamide or acylureidrazone, which then undergoes an intramolecular cyclodehydration to afford the corresponding 3-amino-[1,2,4]-triazole. The product regioselectivity for unsymmetrical 1,3-disubstituted thioureas correlate well with the pKas of the parent amines attached, in which the amine having higher pKa goes to the ring nitrogen while the other nitrogen remains flanked as an exocyclic nitrogen of the triazole core. This method is milder and environmentally sustainable giving good to excellent yields of the desired products.

A direct access to symmetrical and unsymmetrical 2,5-disubstituted [1,3,4]-oxadiazoles has been accomplished through an imine C-H functionalization of N-arylidenearoylhydrazide using a catalytic quantity of Cu(OTf)(2). This is the first example of amidic oxygen functioning as a nucleophile in a Cu-catalyzed oxidative coupling of an imine C-H bond. These reactions can be performed in air atmosphere and moisture making it exceptionally practical for application in organic synthesis.

Either 1,2,4-triazole-thiones or 1,2,4-triazoles are efficiently obtained from arylidenearylthiosemicarbazides by simple tuning of the reaction time.

An efficient process for the oxidative coupling of a variety of phenols having an ortho-benzothiazole substituent, 8-hydroxyquinoline and ortho-formyl phenols with N,N-dialkylformamides using tBuOOH as the oxidant in the presence of a Cu(II)-catalyst is presented.

While reactions of 2-iodobenzamides (IV) proceeds without a ligand, for 2-bromo substrates (I), the assistance of a ligand is essential.

A unique copper-catalyzed cross-dehydro- genative coupling (CDC) of thiols and alkylbenzenes has been developed for the synthesis of thioesters without the assistance of any directing group. A thio- ester moiety is created via successive CS and CO bond formation at the expense of three sp 3 CH bonds of the alkylbenzene and one sp 3 SH bond of the thiol.

A metal free synthesis of 3-aroylindole involving two sp3C–H activation has been achieved starting fromo-alkynyl-N,N-dialkylamines using TBAI–TBHP.

An acyl moiety generated from a-oxocar- boxylic acids via decarboxylation undergoes a palladi- um-catalyzed chemoselective insertion into organic cyanamides to afford N-monosubstituted a-keto- A

The first metal free synthesis of 3-aroylindoles from o-alkynyl-N,N-dialkylamines through a TBAI-catalyzed intramolecular oxidative coupling pathway using TBHP as the oxidant is developed.

A copper-catalyzed cross-dehydrogenative coupling strategy has been developed for the synthesis of two classes of esters from simple solvents. The reaction of methylarenes with cyclic ethers resulted in α-acyloxy ethers involving four sp3 C–H cleavages, while treatment of methylarenes with cycloalkanes led to the formation of allyl esters at the expense of six consecutive sp3 C–H bonds.

Chloride and fluoride can act as leaving group as well, yet requiring longer reaction time and giving lower yields.

A metal free synthesis of 3-aroylindole involving two sp(3) C-H activation has been achieved starting from o-alkynyl-N,N-dialkylamines using catalyst TBAI and oxidant TBHP.

Copper(I) catalysts are usually ineffective on the other hand Pd(II) catalysts are quite effective in promoting intramolecular sp 2 C–H functionalization (C–S bond formation). Herein, we have developed a ligand assisted Pd(II) catalyzed C–S bond formation via C–H activation from arylthioureas leading to the formation of 2-aminobenzothiazoles for substrates bearing electron donating (EDG) groups in the aryl ring. However without the assistance of ligand this Pd(II) catalyzed reaction is quite unproductive particularly for thioureas possessing strongly electron donating groups in the aryl rings. Interestingly, the ligand free Cu(II) catalyzed oxidative cyclization of arylthioureas are equally effective both for arylthioureas possessing electron donating as well as electron withdrawing groups in the aryl rings.

The ortho carbonyl group in hydroxyarenes (I) is essential for the oxidative aroylation of the OH-group with alkylbenzenes in the presence of tBu-OOH as oxidant.

By using alkylbenzenes as aroyl surrogates, copper(II) catalyzed chemoselective O-aroylations of 1,3-dicarbonyl compounds and phenolic −OH ortho to carbonyl (−CHO, −COR) groups have been achieved. A dual mechanism operating in tandem for these transformations has been supported by a crossover experiment.

An efficient protocol for the ortho-aroylation of 2-arylbenzothiazoles and 2-arylbenzoxazoles has been developed using aldehydes as the aroyl source. This Pd-catalyzed substrate-directed sp2-hybridized C–H bond functionalization occurs in the presence of the oxidant tert-butyl hydroperoxide. A variety of functional groups on the 2-arylbenzothiazoles, 2-arylbenzoxazoles, and aldehydes are tolerated under the reaction conditions. Regioselective aroylation at the less hindered ortho position was observed for meta-substituted 2-arylbenzothiazoles.

An efficient Cu(I)-catalyzed synthesis of 3-aroylindoles has been achieved from o-alkynylated N,N-dimethylamines via a sp(3) C-H bond activation α to the nitrogen atom followed by an intramolecular nucleophilic attack with the alkyne using an aqueous solution of tert-butyl hydroperoxide (TBHP) as the oxidant. In this tandem catalytic synthesis of 3-aroylindoles both C-C and C-O bonds are installed at the expense of two sp(3) C-H bond cleavages.

An efficient metal free protocol has been developed for the synthesis of benzylic esters via a cross dehydrogenative coupling (CDC) involving alkylbenzene(s) as a self- or as a cross-coupling partner(s) via the intermediacy of Ar-COOH and the benzylic carbocation obtained from the other half of the alkylbenzene; both symmetrical as well as unsymmetrical esters can be prepared using Bu4NI and TBHP.

An efficient protocol has been developed for the direct ortho-hydroxylation of 2-arylbenzothiazole using Pd(OAc)2 as the catalyst and either of DIB/AcOH or Oxone®/TFA combinations under air atmosphere. Under both these conditions, the methodology tolerates a diverse array of substituents giving good to excellent yields of corresponding ortho-hydroxylated products. Regioselective hydroxylation is observed at the less sterically hindered site of the phenyl ring possessing substituents at its meta position.

This one-pot tandem synthesis can be used to synthesize 5-aminotetrazoles (III), 3-amino[1,2,4]triazoles (VII), 2-amino[1,3,4]oxadiazoles (X), and 2,5-diamino[1,3,4]thiadiazoles (XII).

An efficient metal free protocol has been developed for the synthesis of benzylic esters via a cross dehydrogenative coupling (CDC) involving alkylbenzene(s) as a self- or as a cross-coupling partner(s) via the intermediacy of Ar-COOH and the benzylic carbocation obtained from the other half of the alkylbenzene; both symmetrical as well as unsymmetrical esters can be prepared using Bu4NI and TBHP.

Treatment of activated benzenes with methylarenes in the presence of tBuOOH and Pd(OAc)2 is found to provide a new, unprecedented method to prepare ortho-functionalized diaryl ketones.