Search

Simultaneous bioproduction of hydrogen and ethanol from cheaper waste feedstock has the potential for the development of a more cost-effective biofuel generation process. Crude glycerol (CG), a by-product of the biodiesel industry, is a renewable resource, abundant, sold at low prices and available worldwide. However, the main CG limitations in fermentation processes are mainly related to the presence of impurities and the lack of nitrogen sources, both acting on microbial activity. In this study, a fermentation process with CG was improved using a highly specific microbial consortium called GlyCeroL (GCL). The process was developed in fed-batch fermentation mode using not diluted substrate and carried out under non-sterile conditions and at increasing amounts of the substrate (from 20 to 80 gL−1 of glycerol). The results showed higher H2 (from 6 to 8 LL−1) and EtOH (from 13 to 20 gL−1) production by increasing glycerol concentration from 20 to 40 gL−1. On the other hand, a decrease in glycerol degradation efficiency (from 75 to 56%) was observed. Then, the nitrogen sparging strategy was applied. Using CG of 40 gL−1, process improvement was achieved, leading to the increased production of hydrogen (10 LL−1) but not that of ethanol (20 gL−1). A further increase to 60 gL−1 of glycerol produced a slight increment of EtOH (21 gL−1) and H2 (11 gL−1) but a sharp decrease in glycerol degradation efficiency (41%). Acetate, as the main impurity of CG, was an additional carbon source for GCL microorganisms contributing to EtOH production and increasing that of lactic acid to restore the redox balance. The Denaturing Gradient Gel Electrophoresis (DGGE) fingerprint at the end of all fed-batch fermentations supported the robustness of GCL functional units and their adaptability to fermentation conditions.

Microalgal-based bioprocess offers several advantages including wastewater reclamations, therefore present study assessed the usability of the combination of untreated municipal sewage wastewater (UTMSWW) and secondary treated municipal sewage wastewater (STSWW) for nutrient removal and recovery by

Microalgal-based bioprocess offers several advantages including wastewater reclamations, therefore present study assessed the usability of the combination of untreated municipal sewage wastewater (UTMSWW) and secondary treated municipal sewage wastewater (STSWW) for nutrient removal and recovery by Tetraselmis indica (T. indica) BDUG001. The present study optimized the additional nutrient supplementations (e.g. ASN-III) percentage and day-night cycle, pH and pH with aeration for monitoring high-rate biomass production and nutrient recovery. The study results showed that the combination of 75% UTMSWW + 25% ASN-III supported maximum biomass production (2.65 ± 0.07 g/L). In the optimized day-night cycle (12:12 h), T. indica BDUG001 showed improved biomass production (2.75 ± 0.07 g/L), biomass productivity (165.63 ± 4.42 mg/L/d), and photosynthetic pigments production. Under optimized pH∼ 7.0 with aeration, maximum total nitrate (TN) removal efficiency (87.67 ± 3.08–91.55 ± 1.92%) was observed, while COD and TP removal was maximum at pH ∼ 9.0. The maximum biomass production (2.35 ± 0.07–2.77 ± 0.04 g/L) with biomass productivity (93.75 ± 167.19 ± 2.21 mg/L/d) and lipid content (42.98 ± 1.86–47.85 ± 0.21% DCW) were also at pH 7.0. with aeration. The present study verified the utilization of UTMSWW with the combination of conventional medium, optimized day-night cycle, pH with aeration along with designing low-cost PBR. It was the ideal system for the cultivation of T. indica BDUG001 for the recovery of nutrients from wastewater, production of biofuels and value-added feedstock.

Biomass from four different Nordic microalgal species, grown in BG-11 medium or synthetic wastewater (SWW), was explored as inexpensive carbohydrate-rich feedstock for polyhydroxybutyrate (PHB) production via microbial fermentation. Thermochemical pre-treatment (acid treatment followed by autoclavation) with 2% hydrochloric acid or 1% sulphuric acid (v/v) was used to maximize sugar yield prior to fermentation. Pre-treatment resulted in ∼5-fold higher sugar yield compared to the control. The sugar-rich hydrolysate was used as carbon source for the PHB-producing extremophilic bacterium Halomonas halophila. Maximal PHB production was achieved with hydrolysate of Chlorococcum sp. (MC-1) grown on BG-11 medium (0.27 ± 0.05 g PHB/ g DW), followed by hydrolysate derived from Desmodesmus sp. (RUC-2) grown on SWW (0.24 ± 0.05 g PHB/ g DW). Nordic microalgal biomass grown on wastewater therefore can be used as cheap feedstock for sustainable bioplastic production. This research highlights the potential of Nordic microalgae to develop a biobased economy.

Urbanization is a revolutionary and necessary step for the development of nations. However, with development emanates its drawback i.e., generation of a huge amount of wastewater. The existence of diverse types of nutrient loads and toxic compounds in wastewater can reduce the pristine nature of the ecosystem and adversely affects human and animal health. The conventional treatment system reduces most of the chemical contaminants but their removal efficiency is low. Thus, microalgae-based biological wastewater treatment is a sustainable approach for the removal of nutrient loads from wastewater. Among various microalgae, Tetraselmis sp. is a robust strain that can remediate industrial, municipal, and animal-based wastewater and reduce significant amounts of nutrient loads and heavy metals. The produced biomass contains lipids, carbohydrates, and pigments. Among them, carbohydrates and lipids can be used as feedstock for the production of bioenergy products. Moreover, the usage of a photobioreactor (PBR) system improves biomass production and nutrient removal efficiency. Thus, the present review comprehensively discusses the latest studies on Tetraselmis sp. based wastewater treatment processes, focusing on the use of different bioreactor systems to improve pollutant removal efficiency. Moreover, the applications of Tetraselmis sp. biomass, advancement and research gap such as immobilized and co-cultivation have also been discussed. Furthermore, an insight into the harvesting of Tetraselmis biomass, effects of physiological, and nutritional parameters for their growth has also been provided. Thus, the present review will broaden the outlook and help to develop a sustainable and feasible approach for the restoration of the environment.

Excessive generation of wastewater is a matter of concern around the globe. Wastewater treatment utilizing a microalgae-mediated process is considered an eco-friendly and sustainable method of wastewater treatment. However, low biomass productivity, costly harvesting process, and energy extensive cultivation process are the major bottleneck. The use of the microalgal-bacteria granular consortia (MBGC) process is economic and requires less energy. For efficient utilization of MBGC, knowledge of its structure, composition and interaction are important. Various microscopic, molecular and metabolomics techniques play a significant role in understating consortia structure and interaction between partners. Microalgal-bacteria granular consortia structure is affected by various cultivation parameters like pH, temperature, light intensity, salinity, and the presence of other pollutants in wastewater. In this article, a critical evaluation of recent literature was carried out to develop an understanding related to interaction behavior that can help to engineer consortia having efficient nutrient removal capacity with reduced energy consumption.

The major downfalls of the microalgal biorefinery are low volume of high value product accumulation, low biomass productivity and high cultivation costs. Here, we aimed to improve the biomass productivity of the industrially relevant

Microorganisms including actinomycetes, archaea, bacteria, fungi, yeast, and micro algae are the auspicious source of vital bioactive compounds. In this review, the existing state of the art re-garding antimicrobial molecules from microorganisms has been summarized. The potential an-timicrobial compounds from actinomycetes, particularly Streptomyces sp.; archaea; fungi including endophytic and marine-derived fungi, mushroom; yeast, and microalgae were briefly described. Furthermore, this review briefly summarized the activity and mode of action of bacteriocins, a ribosomally synthesized antimicrobial peptides product of Eurotium sp., Streptomyces parvulus, S. thermophiles, Lactococcus lactis, etc. Bacteriocins have inherent properties such as targeting multi-ple-drug resistant pathogens, which allows them to be considered next-generation antibiotics. Similarly, Glarea lozoyensis derived antifungal lipohexpeptides i.e., pneumocandins, inhibits 1,3-β-glucan synthase of the fungal cell wall and acts as a precursor for the synthesis of caspo-fungin, is also elaborated. In conclusion, this review highlights the possibility of using microor-ganisms as an antimicrobial resource for biotechnological, nutraceutical, and pharmaceutical ap-plications. However, more investigations are still required to separate, purify, and characterize these bioactive compounds and transfer these primary drugs into clinically approved antibiotics.

Nordic Desmodesmus microalgal strains (2-6) and (RUC-2) were exposed to abiotic stress (light and salt) to enhance lipids and carotenoids. The biomass output of both strains increased by more than 50% during light stress of 800 μmol m-2 s-1 compared to control light. The biomass of Desmodesmus sp. (2-6) contained most lipids (15% of dry weight) and total carotenoids (16.6 mg g-1) when grown at moderate light stress (400 μmol m-2 s-1), which further could be enhanced up to 2.5-fold by salinity stress. Desmodesmus sp. (RUC-2) exhibited maximal lipid (26.5%) and carotenoid (43.8 mg L-1) content at light intensities of 400 and 100 μmol m-2 s-1, respectively. Salinity stress stimulated lipid accumulation by 39%. Nordic Desmodesmus strains therefore are not only able to tolerate stress conditions, but their biomass considerably improves under stress. These strains have high potential to be used in algal bio-factories on low-cost medium like Baltic seawater., The authors are grateful to the Swedish Research Council FORMAS (2019-00492 to CF and 2020-01028 to AP), the NordForsk NCoE program “NordAqua” (Project no. 82845) and Umeå University as well as the Industrial Doctoral School at Umeå University for their financial support. The authors would further like to thank András Gorzsás from the Vibrational Spectroscopy Core Facility at Umeå University for the provided expertise and the data processing of the FTIR spectra.

The polyhydroxyalkanoate was discovered almost around a century ago. Still, all the efforts to replace the traditional non-biodegradable plastic with much more environmentally friendly alternative are not enough. While the petroleum-based plastic is like a parasite, taking over the planet rapidly and without any feasible cure, its perennial presence has made the ocean a floating island of life-threatening debris and has flooded the landfills with toxic towering mountains. It demands for an immediate solution; most resembling answer would be the polyhydroxyalkanoates. The production cost is yet one of the significant challenges that various corporate is facing to replace the petroleum-based plastic. To deal with the economic constrain better strain, better practices, and a better market can be adopted for superior results. It demands for systems for polyhydroxyalkanoate production namely bacteria, yeast, microalgae, and transgenic plants. Solely strains affect more than 40% of overall production cost, playing a significant role in both upstream and downstream processes. The highly modifiable nature of the biopolymer provides the opportunity to replace the petroleum plastic in almost all sectors from food packaging to medical industry. The review will highlight the recent advancements and techno-economic analysis of current commercial models of polyhydroxyalkanoate production. Bio-compatibility and the biodegradability perks to be utilized highly efficient in the medical applications gives ample reason to tilt the scale in the favor of the polyhydroxyalkanoate as the new conventional and sustainable plastic.

Oxidative stress originates from an elevated intracellular level of free oxygen radicals that cause lipid peroxidation, protein denaturation, DNA hydroxylation, and apoptosis, ultimately impairing cell viability. Antioxidants scavenge free radicals and reduce oxidative stress, which further helps to prevent cellular damage. Medicinal plants, fruits, and spices are the primary sources of antioxidants from time immemorial. In contrast to plants, microorganisms can be used as a source of antioxidants with the advantage of fast growth under controlled conditions. Further, microbe-based antioxidants are nontoxic, noncarcinogenic, and biodegradable as compared to synthetic antioxidants. The present review aims to summarize the current state of the research on the antioxidant activity of microorganisms including actinomycetes, bacteria, fungi, protozoa, microalgae, and yeast, which produce a variety of antioxidant compounds, i.e., carotenoids, polyphenols, vitamins, and sterol, etc. Special emphasis is given to the mechanisms and signaling pathways followed by antioxidants to scavenge Reactive Oxygen Species (ROS), especially for those antioxidant compounds that have been scarcely investigated so far.

Oxidative stress is an elevated intracellular level of free oxygen radicals that cause lipid peroxidation, protein denaturation, DNA hydroxylation, and apoptosis, ultimately negotiating cells viability. Antioxidants can scavenge such free radicals, thus reducing the oxidative stress and eventually prevent cellular damage. Medicinal plants, fruits, and spices remain the prioritized sources of antioxidants and antimicrobial properties since the time immemorial, but in contrast to plants, microorganisms can be grown at a faster rate under controlled conditions. They are non-toxic, non-carcinogenic, and biodegradable as compared to synthetic antioxidants. Microorganisms including actinomycetes, archaea, bacteria, protozoa, yeast, and fungi are auspicious source of vital bioactive compounds. The list comprises ample of bioactive components from microorganisms. One of them is bacteriocins, which are ribosomally synthesized antimicrobial peptides product of Eurotium sp., Streptomyces parvulus, S. thermophiles, Lactococcus lactis, etc. It has a great potential as next-generation antibiotics targeting the multiple-drug resistant pathogens. Pneumocandins are antifungal lipohexapeptides derived from the fungus Glarea lozoyensis, and inhibit 1,3-β-glucan synthase of the fungal cell wall and act as a precursor for the synthesis of caspofungin. It is widely used against invasive fungal infections and has been recently approved by the FDA. Taxol (paclitaxel), a chemotherapeutic drug derived from the bark of Taxus brevifolia can also be produced by endophytic fungi Taxomyces andreanae and Nodulisporium sylviforme. It is known to inhibit several fungi such as Pythium, Aphanomyces and Phytophthora. Hispidin and its derivate isolated from P. hispidus, reduce inducible nitric oxide synthase (iNOS) expression, obstruct the transcriptional activity of NF-κB, and also decrease the production of reactive oxygen species (ROS) in macrophages. Astaxanthin, known as an “aquatic” carotenoid produced by H. pluvialis, also has excellent ROS quenching activity. This study mainly focuses on fascinating antioxidant and antimicrobial compounds that have been scarcely investigated in microorganisms and discuss the promise and challenges of microorganisms as providers of health benefits.

Microalgae biomass have been used as a source of nutrient-rich food, feed, and health-promoting compounds. Among the several commercially available microalgae, Haematococcus pluvialis is the most abundant source of natural astaxanthin (3,3′-dihydroxy-β,β-carotene-4,4′-dione), which is considered as “super antioxidant.” Therefore natural astaxanthin produced by H. pluvialis has a higher antioxidant capacity than the synthetic sources, which reduces oxidative stress and free radicals and helps the human body to maintain a healthy state. However, H. pluvialis contains astaxanthin inside the cells, which need to be extracted using nontoxic extraction technologies for different application. Among the different available extraction technologies, supercritical fluid extraction (SFE) is a modern technology with increasing applications in pharmaceutical and nutraceutical sector. The most frequently employed supercritical solvent in food and natural product processing is carbon dioxide (CO2) due to its low critical temperature and pressure while considered as nontoxic extraction solvent. Therefore, nowadays, supercritical carbon dioxide (SC-CO2) is considered as a new substitute for complete extraction of natural compounds from different matrices. However, the extraction efficiency and purity of astaxanthin in the extract are influenced by different operative conditions such as the extraction pressure, temperature, time, and use of cosolvent. Hence the optimum operative condition of SC-CO2 extraction could enhance the extraction yields of astaxanthin and of its purity the extract. Therefore present chapter summarizes the effects of several extraction parameters on SC-CO2 extraction of astaxanthin from H. pluvialis, which could serve as benchmark for future development of SC-CO2 extraction technology and its commercial implementation in pharmaceutical and nutraceutical sector.

The increasing world population generates huge amounts of wastewater as well as large energy demand. Additionally, fossil fuel’s combustion for energy production causes the emission of greenhouse gases (GHG) and other pollutants. Therefore, there is a strong need to find alternative green approaches for wastewater treatment and energy production. Microalgae biorefineries could represent an effective strategy to mitigate the above problems. Microalgae biorefineries are a sustainable alternative to conventional wastewater treatment processes, as they potentially allow wastewater to be treated at lower costs and with lower energy consumption. Furthermore, they provide an effective means to recover valuable compounds for biofuel production or other applications. This review focuses on the current scenario and future prospects of microalgae biorefineries aimed at combining wastewater treatment with biofuel production. First, the different microalgal cultivation systems are examined, and their main characteristics and limitations are discussed. Then, the technologies available for converting the biomass produced during wastewater treatment into biofuel are critically analyzed. Finally, current challenges and research directions for biofuel production and wastewater treatment through this approach are outlined.

Huge quantities of apple orchard waste (AOW) generated could be regarded as a promising alternative energy source for fuel and material production. Conventional and traditional processes for disposal of these wastes are neither economical nor environment friendly. Hence, sustainable technologies are required to be developed to solve this long-term existence and continuous growing problem. In light of these issues, this review pays attention towards sustainable and renewable systems, various value-added products from an economic and environmental perspective. Refined bio-product derived from AOW contributes to resource and energy demand comprising of biomethane, bioethanol, biofuels, bio-fertilizers, biochar, and biochemicals, such as organic acid, and enzymes. However, the market implementation of biological recovery requires reliable process technology integrated with an eco-friendly and economic production chain, classified management., Graphical Abstract

Sustainability and renewability are demanding the most important challenges that need to be achieved. Therefore, microalgae and Natural deep eutectic solvents (NaDEs) are two classes that deserve particular attention that can allow to meet the sustainability. Microalgae, as raw materials, can produce a variety of value-added compounds, which have numerous applications in pharmaceutical, nutraceutical and cosmetics sector. While, NaDES have peculiar characteristics that allow the recovery of various value-added compounds from microalgae biomass in sustainable manner. Microalgal compounds can be extracted using organic acids, alcohols or sugars by employing the NaDES process. These solvents act as are non-toxic, non-volatile and renewable during NaDES process. Considering the properties shown by microalgae and NaDES separately, a combined microalgae-NaDES extraction is extremely promising for future industrial applications. However, this technology requires proper pre-treatment of microalgal biomass to attain the complete recovery of valuable compounds. In conclusion, this review summarize the potential application of NaDES for extraction of intracellular compounds from microalgal biomass and their related pre-treatments to improve the extraction efficiency.

Polyhydroxyalkanoates (PHAs) are group monomers/heteropolymers that are biodegradable and widely used in biomedical applications. They are considered as alternatives to fossil derived polymers and accumulated by microbes including extremophilic archaea as energy storage inclusions under nutrient limitations. The use of extremophilic archaea for PHA production is an economically viable option for conventional aerobic processes, but less is known about their pathways and PHA accumulation capacities. This review summarized: (a) specific adaptive mechanisms towards extreme environments by extremophiles and specific role of PHAs; (b) understanding of PHA synthesis/metabolism in archaea and specific functional genes; (c) genetic engineering and process engineering approaches required for high-rate PHA production using extremophilic archaea. To conclude, the future studies are suggested to understand the membrane lipids and PHAs accumulation to explain the adaptation mechanism of extremophiles and exploiting it for commercial production of PHAs.

The uncontrolled carbon dioxide (CO2) emission is increasing every day due to human activities and the rapid industrial revolution. However, mainly oil-producing countries, and highly populated and industrialized countries, are the highest emitters of CO2. At present, CO2 concentration is approximately 408 ppm in the environment, which causes several ecological issues, like global warming, and disturbs the fauna and flora of the Earth. Therefore, many approaches (physical, chemical, and biological) are used to solve this major ecological threat and reduce CO2 concentration in the ecosystem. Among the available approaches, biological CO2 mitigation process is more feasible as compared to physical and chemical approaches due to low cost and zero emission of other pollutants. Mainly, plants, cyanobacteria, and microalgae generally fix CO2 from the atmosphere and utilize it as a carbon source for their growth. Recently, microalgal cultivation has gained tremendous research interest worldwide, due to their high growth rates, higher CO2 sequestration rate, and the accumulation of high-value-added compounds during the growth phase. Moreover, microalgal-based CO2 sequestering system can be developed at the industrial sites. The microalgal sequestering system is considered as a green technology for capturing CO2 from the industrial flue gases exhaust for biomass production. Moreover, the biomass of microalgae can be utilized in nutraceuticals, cosmetic and energy sectors, which can improve the economic viability of microalgal-based CO2 mitigation process. Thus, this chapter discusses the microalgal-based system for atmospheric CO2 capture and the application of algal biomass to improve the economic viability.