Search

OBJECTIVES: Percutaneous pulmonary artery cannulas, used as inflow for left ventricular venting or as outflow for right ventricular mechanical circulatory support, are easily and rapidly deployable with transesophageal and fluoroscopic guidance. METHODS: We chose to review our institutional and technical experience with all right atrium to pulmonary artery cannulations. RESULTS: Based on the review, we describe 6 right atrium to pulmonary artery cannulation strategies. They are divided into total right ventricular assist support, partial right ventricular assist support, and left ventricular venting. A single limb cannula or a dual lumen cannula can be used for right ventricular support. CONCLUSIONS: In the right ventricular assist device configuration, percutaneous cannulation may prove beneficial in cases of isolated right ventricular failure. Conversely, pulmonary artery cannulation can be used for left ventricular venting as drainage to a cardiopulmonary bypass or extracorporeal membrane oxygenation circuit. This article can be used as a reference for the technical aspects of cannulation, decision-making in patient selection, and management of patients in these clinical scenarios.

Background Impella (Abiomed Inc, Danvers, MA) is a temporary mechanical support device positioned across the aortic valve, and can be used to support patient before LVAD implantation. There are no data on the incidence of aortic insufficiency (AI) in patients supported with Impella as a bridge to durable LVAD implantation. We sought to assess the incidence of AI in patients with Impella support as a bridge to durable left ventricular assist device (LVAD) implantation. Methods We reviewed all patients undergoing primary LVAD implantation at the University of Pennsylvania from January 2015 onward, comparing those supported with Impella as temporary mechanical support with those supported by either venoarterial extracorporeal life support or an intra-aortic balloon pump. We reviewed transthoracic echocardiography preoperatively, as well as at 1 week, 1, 3, 6, 9, and 12 months after LVAD implantation. Results A total of 215 echocardiograms were analyzed in 41 patients. Eleven patients were supported with Impella before LVAD implant—6 patients with Impella alone (5 with Impella CP, 1 with Impella 5.0) and 5 with Impella in conjunction with venoarterial extracorporeal life support (2 with Impella 2.5, 2 with Impella CP, and 1 with Impella 5.0). After LVAD implant, mild or moderate AI developed in 82% of patients supported with Impella (9 of 11) compared with 43% of those without Impella (13 of 30) (P = .038). Conclusions Patients supported by Impella as a bridge to durable LVAD have a higher risk of developing AI. Further studies are needed to assess this risk as the use of the Impella increases.

Subacute groin complications associated with extracorporeal membrane oxygenation (ECMO) cannulation are well recognized, yet their effects on clinical outcomes remain unknown. This single-center, retrospective study reviewed all patients receiving venoarterial ECMO from 01/2017 to 02/2020. Cohorts analyzed included transplanted patients (TPs) and non-transplanted patients (N-TPs) who did or did not develop ECMO-related subacute groin complications. Standard descriptive statistics were used for comparisons. Logistic regressions identified associated risk factors. Overall, 82/367 (22.3%) ECMO patients developed subacute groin complications, including 25/82 (30.5%) seromas/lymphoceles, 32/82 (39.0%) hematomas, 18/82 (22.0%) infections, and 7/82 (8.5%) non-specified collections. Of these, 20/82 (24.4%) underwent surgical interventions, most of which were muscle flaps (14/20, 70.0%). TPs had a higher incidence of subacute groin complications than N-TPs (14/28, 50.0% vs. 68/339, 20.1%, P = 0.001). Seromas/lymphoceles more often developed in TPs than N-TPs (10/14, 71.4% vs. 15/68, 22.1%, P = 0.001). Most patients with subacute groin complications survived to discharge (60/68, 88.2%). N-TPs who developed subacute groin complications had longer post-ECMO lengths of stay than those who did not (34 days, IQR 16-53 days vs. 17 days, IQR 8-34 days, P 0.001). Post-ECMO length of stay was also longer among patients who underwent related surgical interventions compared to those who did not (50 days, IQR 35-67 days vs. 29 days, IQR 16-49 days, P = 0.007). Transplantation was the strongest risk factor for developing subacute groin complications (OR 3.91, CI

Objective To assess societal preferences regarding allocation of extracorporeal membrane oxygenation (ECMO) as a rescue option for select patients with coronavirus disease 2019 (COVID-19). Design Cross-sectional survey of a nationally representative sample. Setting Amazon Mechanical Turk platform. Participants In total, responses from 1,041 members of Amazon Mechanical Turk crowd-sourcing platform were included. Participants were 37.9 ± 12.6 years old, generally white (65%), and college-educated (66.1%). Many reported working in a healthcare setting (22.5%) and having a friend or family member who was admitted to the hospital (43.8%) or died from COVID-19 (29.9%). Measurements and Main Results Although most reported an unwillingness to stay on ECMO for >one week without signs of recovery, participants were highly supportive of ECMO utilization as a life-preserving technique on a policy level. The majority (96.7%) advocated for continued use of ECMO to treat COVID patients during periods of resource scarcity but would prioritize those with highest likelihood of recovery (50%) followed by those who were sickest regardless of survival chances (31.7%). Patients >40 years old were more likely to prefer distributing ECMO on a first-come first-served basis (21.5% v 13.3%, p Conclusion Even though participants expressed hesitation regarding ECMO in personal circumstances, they were uniformly in support of using ECMO to treat COVID patients at a policy level for others who might need it, even in the setting of severe scarcity.

COVID-19-related coagulopathy is a known complication of SARS-CoV-2 infection and can lead to intracranial hemorrhage (ICH), one of the most feared complications of extracorporeal membrane oxygenation (ECMO). We sought to evaluate the incidence and etiology of ICH in patients with COVID-19 requiring ECMO. Patients at two academic medical centers with COVID-19 who required venovenous-ECMO support for acute respiratory distress syndrome (ARDS) were evaluated retrospectively. During the study period, 33 patients required ECMO support; 16 (48.5%) were discharged alive, 13 died (39.4%), and 4 (12.1%) had ongoing care. Eleven patients had ICH (33.3%). All ICH events occurred in patients who received intravenous anticoagulation. The ICH group had higher C-reactive protein (p = 0.04), and procalcitonin levels (p = 0.02), and IL-6 levels (p = 0.05), lower blood pH before and after ECMO (p 

Objective Anticoagulation may be a challenge in coronavirus disease 2019 (COVID-19) extracorporeal membrane oxygenation due to endothelial injury and dysregulation of coagulation, which may increase the risk of thrombotic and bleeding complications. This report was created to describe the authors’ single institutional experience, with emphasis on the high rate of intracranial hemorrhage for the first 10 patients with COVID-19 placed on venovenous extracorporeal membrane oxygenation (VV ECMO). Design Case series, retrospective analysis. Setting Single institution. Participants Ten patients. Interventions None. Measurements and Main Results Patient characteristics, mortality, stroke rate, and length of stay data were collected in all patients. In addition, laboratory values of D-dimer and C-reactive protein and standard measurements of prothrombin and activated partial thromboplastin time were collected on all patients. Ten patients, each confirmed with COVID-19 via reverse transcription-polymerase chain reaction, were supported on VV ECMO for acute respiratory distress syndrome (ARDS) for a mean duration of 9.4 ± 7 days. Four of 10 patients had hemorrhagic strokes, 3 of which resulted in death. At 30 days after initiation of VV ECMO, a total of 7 survivors included 6 patients discharged from the hospital and 1 patient who remained in the intensive care unit. Conclusions In this small study of 10 patients, intracranial hemorrhage was a common complication, resulting in a high rate of death. The authors urge caution in the anticoagulation management of VV ECMO for patients with severe ARDS and COVID-19 patients. Close monitoring of all hematologic parameters is recommended during ECMO support while awaiting larger, multicenter studies to examine the best practice.

Valvular heart disease is currently treated with mechanical valves, which benefit from longevity, but are burdened by chronic anticoagulation therapy, or with bioprosthetic valves, which have reduced thromboembolic risk, but limited durability. Tissue engineered heart valves have been proposed to resolve these issues by implanting a scaffold that is replaced by endogenous growth, leaving autologous, functional leaflets that would putatively eliminate the need for anticoagulation and avoid calcification. Despite the diversity in fabrication strategies and encouraging results in large animal models, control over engineered valve structure-function remains at best partial. This study aimed to overcome these limitations by introducing double component deposition (DCD), an electrodeposition technique that employs multi-phase electrodes to dictate valve macro and microstructure and resultant function. Results in this report demonstrate the capacity of the DCD method to simultaneously control scaffold macro-scale morphology, mechanics and microstructure while producing fully assembled stent-less multi-leaflet valves composed of microscopic fibers. DCD engineered valve characterization included: leaflet thickness, biaxial properties, bending properties, and quantitative structural analysis of multi-photon and scanning electron micrographs. Quasi-static ex-vivo valve coaptation testing and dynamic organ level functional assessment in a pressure pulse duplicating device demonstrated appropriate acute valve functionality.

Red blood cell (RBC) susceptibility to mechanically induced hemolysis, or RBC mechanical fragility (MF), is an important parameter in the characterization of erythrocyte membrane health. The rocker bead test (RBT) and associated calculated mechanical fragility index (MFI) is a simple method for the assessment of RBC MF. Requiring a minimum of 15.5 mL of blood and necessitating adjustment of hematocrit (Ht) to a “standard” value (40%), the current RBT is not suitable for use in most studies involving human subjects. To address these limitations, we propose a 6.5 mL reduced volume RBT and corresponding modified MFI (MMFI) that does not require prior Ht adjustment. This new method was assessed for i) correlation to the existing text, ii) to quantify the effect of Ht on MFI, and iii) validation by reexamining the protective effect of plasma proteins on RBC MF. The reduced volume RBT strongly correlated (r = 0.941) with the established large volume RBT at matched Hts, and an equation was developed to calculate MMFI: a numerical estimation (R2 = 0.923) of MFI if performed with the reduced volume RBT at “standard” (40%) Ht. An inversely proportional relationship was found between plasma protein concentration and RBC MF using the MMFI-reduced volume method, supporting previous literature findings. The new reduced volume RBT and modified MFI will allow for the measurement of RBC MF in clinical and preclinical studies involving humans or small animals.

Bench-top in vitro hemolysis testing is a fundamental tool during the design and regulatory safety evaluation of blood-contacting medical devices. While multiple published experimental protocols exist, descriptions of the test loop reservoir remain ambiguous. A critical fixture within the circuit, there is no readily available blood reservoir that ensures thorough mixing and complete air evacuation: two major factors which can affect results. As part of the Food and Drug Administration (FDA) Critical Path Initiative, we developed a three-piece reservoir consisting of a 3D-printed base, a plastic clamp set, and a medical-grade blood bag. This simple, reusable, and cost-effective design was used successfully in the hemolysis assessment of FDA benchmark nozzles and prototype rotary blood pumps, and may be useful as an integral component to any in vitro blood circulation loop.

Multilaboratory in vitro blood damage testing was performed on a simple nozzle model to determine how different flow parameters and blood properties affect device-induced hemolysis and to generate data for comparison with computational fluid dynamics-based predictions of blood damage as part of an FDA initiative for assessing medical device safety. Three independent laboratories evaluated hemolysis as a function of nozzle entrance geometry, flow rate, and blood properties. Bovine blood anticoagulated with acid citrate dextrose solution (2-80 h post-draw) was recirculated through nozzle-containing and paired nozzle-free control loops for 2 h. Controlled parameters included hematocrit (36 ± 1.5%), temperature (25 °C), blood volume, flow rate, and pressure. Three nozzle test conditions were evaluated (n = 26-36 trials each): (i) sudden contraction at the entrance with a blood flow rate of 5 L/min, (ii) gradual cone at the entrance with a 6-L/min blood flow rate, and (iii) sudden-contraction inlet at 6 L/min. The blood damage caused only by the nozzle model was calculated by subtracting the hemolysis generated by the paired control loop test. Despite high intralaboratory variability, significant differences among the three test conditions were observed, with the sharp nozzle entrance causing the most hemolysis. Modified index of hemolysis (MIHnozzle ) values were 0.292 ± 0.249, 0.021 ± 0.128, and 1.239 ± 0.667 for conditions i-iii, respectively. Porcine blood generated hemolysis results similar to those obtained with bovine blood. Although the interlaboratory hemolysis results are only applicable for the specific blood parameters and nozzle model used here, these empirical data may help to advance computational fluid dynamics models for predicting blood damage.

To address the challenge of unloading the left ventricle during pediatric mechanical circulatory support using next-generation rotary blood pumps, a novel inflow cannula was developed. This unique inflow cannula for pediatric, continuous-flow, left ventricular assist devices (VADs) with a parabolic-shaped inlet entrance was evaluated alongside a bevel-tip and fenestrated-tip cannula via an ex vivo, isolated-heart experimental setup. Performance was characterized using two clinical scenarios of over-pumping and hypovolemia, created by varying pump speed and filling preload pressure respectively, at ideal and off-axis cannula placement to assess ventricular unloading and positional sensitivity. Quantitative and qualitative assessments were performed on the resultant hemodynamics and intra-ventricular boroscopic images to classify conditions of non-suction, partial, gradual or severe entrainment, and ventricular collapse. The parabolic-tip cannula was found to be significantly less sensitive to placement position (p-values < 0.001) than the bevel-tip cannula under all conditions, while not statistically different from the fenestrated cannula. Visual analysis of the parabolic-tip cannula showed complete resistance to entrainment whereas the fenestrated-tip had partial entrainment in 90% and 87% of the over-pumping and hypovolemic studies, respectively. We conclude that future pediatric VAD designs may benefit from incorporating the parabolic-tip inflow cannula design in order to maximize unloading of the left ventricle in ideal and non-optimal conditions.

Objectives The PediaFlow (HeartWare International, Inc, Framingham, Mass) is a miniature, implantable, rotodynamic, fully magnetically levitated, continuous-flow pediatric ventricular assist device. The fourth-generation PediaFlow was evaluated in vitro and in vivo to characterize performance and biocompatibility. Methods Supported by 2 National Heart, Lung, and Blood Institute contract initiatives to address the limited options available for pediatric patients with congenital or acquired cardiac disease, the PediaFlow was developed with the intent to provide chronic cardiac support for infants as small as 3 kg. The University of Pittsburgh–led Consortium evaluated fourth-generation PediaFlow prototypes both in vitro and within a preclinical ovine model (n = 11). The latter experiments led to multiple redesigns of the inflow cannula and outflow graft, resulting in the implantable design represented in the most recent implants (n = 2). Results With more than a decade of extensive computational and experimental efforts spanning 4 device iterations, the AA battery–sized fourth-generation PediaFlow has an operating range of 0.5 to 1.5 L/min with minimal hemolysis in vitro and excellent hemocompatibility (eg, minimal hemolysis and platelet activation) in vivo. The pump and finalized accompanying implantable components demonstrated preclinical hemodynamics suitable for the intended pediatric application for up to 60 days. Conclusions Designated a Humanitarian Use Device for “mechanical circulatory support in neonates, infants, and toddlers weighing up to 20 kg as a bridge to transplant, a bridge to other therapeutic intervention such as surgery, or as a bridge to recovery” by the Food and Drug Administration, these initial results document the biocompatibility and potential of the fourth-generation PediaFlow design to provide chronic pediatric cardiac support.

After many decades of improvements in mechanical circulatory assist devices (CADs), blood damage remains a serious problem during support contributing to variety of adverse events, and consequently affecting patient survival and quality of life. The mechanisms of cumulative cell damage in continuous-flow blood pumps are still not fully understood despite numerous in vitro, in vivo, and in silico studies of blood trauma. Previous investigations have almost exclusively focused on lethal blood damage, namely hemolysis, which is typically negligible during normal operation of current generation CADs. The measurement of plasma free hemoglobin (plfHb) concentration to characterize hemolysis is straightforward, however sublethal trauma is more difficult to detect and quantify since no simple direct test exists. Similarly, while multiple studies have focused on thrombosis within blood pumps and accessories, sublethal blood trauma and its sequelae have yet to be adequately documented or characterized. This review summarizes the current understanding of sublethal trauma to red blood cells (RBCs) produced by exposure of blood to flow parameters and conditions similar to those within CADs. It also suggests potential strategies to reduce and/or prevent RBC sublethal damage in a clinically-relevant context, and encourages new research into this relatively uncharted territory.

The PediVAS blood pump is a magnetically levitated centrifugal pump designed for bridge-to-decision or bridge-to-recovery in pediatric patients from 3 to 20 kg in weight. In preparation for submission of an investigational device exemption (IDE) application, we completed a final six-animal series of pre-clinical studies. The studies were conducted under controlled conditions as prescribed by the recently released FDA guidance document for animal studies for cardiovascular devices. Three 30-day chronic left ventricular support studies were completed in a juvenile lamb model to demonstrate the safety and hemocompatibility of the PediVAS pump. Three additional 8-h acute biventricular support studies were performed to demonstrate the feasibility of this approach from a hemodynamic and systems standpoint. It is estimated that 50% of pediatric patients who require left ventricular support also require right ventricular support. All studies were successfully completed without complications, device malfunctions, or adverse events. End-organ function was normal for the chronic studies. We noted small surface lesions on one kidney from each chronic study as well as the presence of ring thrombus on connectors, as expected for these types of studies in animal models. The strategy and challenges imposed by performing a controlled cardiovascular device study in a juvenile lamb model are discussed. We believe that these successful implants demonstrate safety and performance for the PediVAS device for support of an IDE application to initiate human clinical trials and provide a roadmap for other researchers.

Ventricular assist devices (VADs) have significantly impacted the treatment of adult cardiac failure, but few options exist for pediatric patients. This has motivated our group to develop an implantable magnetically levitated rotodynamic VAD (PediaFlow®) for 3–20 kg patients. The second prototype design of the PediaFlow (PF2) is 56% smaller than earlier prototypes, and achieves 0.5–1.5 L/min blood flow rates. In vitro hemodynamic performance and hemolysis testing were performed with analog blood and whole ovine blood, respectively. In vivo evaluation was performed in an ovine model to evaluate hemocompatibility and end-organ function. The in vitro normalized index of hemolysis was 0.05–0.14 g/L over the specified operating range. In vivo performance was satisfactory for two of the three implanted animals. A mechanical defect caused early termination at 17 days of the first in vivo study, but two subsequent implants proceeded without complication and electively terminated at 30 and 70 days. Serum chemistries and plasma free hemoglobin were within normal limits. Gross necropsy revealed small, subclinical infarctions in the kidneys of the 30 and 70 day animals (confirmed by histopathology). The results of these experiments, particularly the biocompatibility demonstrated in vivo encourage further development of a miniature magnetically levitated VAD for the pediatric population. Ongoing work including further reduction of size will lead to a design freeze in preparation for of clinical trials.

Extracorporeal membrane oxygenation (ECMO) is rarely used in patients with severe pulmonary hypertension (PH) as a bridge to lung transplantation. In this study, we assess the blood biocompatibility of the integrated CentriMag-Novalung ECMO system (venoarterial) in an acute model of PH. Severe PH (≥2/3 systemic) was induced in eight sheep through progressive ligation of the main pulmonary artery. System performance, platelet activation, thromboelastography (TEG) parameters, fibrinogen, plasma-free hemoglobin, and total plasma protein were measured at initiation, 3, and 6 hr of support in the ECMO (N = 4) and sham (N = 4) groups. A stable ECMO flow (2.2 ± 0.1 L/min), low transmembrane pressure gradient, and steady blood O2 and CO2 levels were maintained. Platelet activation was low (

The PediVAS blood pump is a magnetically levitated centrifugal pump designed for pediatric bridge-to-decision or bridge-to-recovery in pediatric patients from 3–20kg in weight. In preparation for submission of an investigational device exemption (IDE) application, we completed a final six-animal series of pre-clinical studies. The studies were conducted under controlled conditions as prescribed by the recently released FDA guidance document for animal studies for cardiovascular devices. Three 30-day chronic left ventricular support studies were completed in a juvenile lamb model to demonstrate the safety and hemocompatibility of the PediVAS pump. Three additional 8-hour acute biventricular support studies were performed to demonstrate the feasibility of this approach from a hemodynamic and systems standpoint. It is estimated that 50% of pediatric patients who require left ventricular support also require right ventricular support. All studies were successfully completed without complications, device malfunctions, or adverse events. End-organ function was normal for the chronic studies. We noted small surface lesions on one kidney from each chronic study as well as the presence of ring thrombus on connectors, as expected for these types of studies in animal models. The strategy and challenges imposed by performing a controlled cardiovascular device study in a juvenile lamb model are discussed. We believe that these successful implants demonstrate safety and performance for the PediVAS device for support of an IDE application to initiate human clinical trials and provide a roadmap for other researchers.

Mechanical circulatory support for the smallest newborn pediatric patients has historically been limited to extracorporeal membrane oxygenation, which can only provide several days to weeks of full cardiac support; far short of the median waiting time for pediatric heart transplantation of nearly three months [1]. Recently, new technologies have been developed, including the PediaFlow pediatric ventricular assist device, to address this need. The PediaFlow device is a magnetically levitated (mag lev), mixed flow turbodynamic blood pump which has been developed in large part in silico using CFD-based inverse design optimization and closed form rotor dynamics models [2, 3]. Each prototype undergoes a series of in vitro and in vivo tests to verify the accuracy of the simulations in predicting performance and biocompatibility. The overall goal is continued refinement and progress towards an implantable pump that produces 0.3 −1.5 L/min for up to 6 months in pediatric heart failure patients from 5 to 15 kg. We describe here the design principles and test procedures for the first three prototypes as well as the predicted performance for a fourth prototype currently being prepared for testing (Figure 1).Copyright © 2011 by ASME

In vitro evaluation of the potential of a circulatory-assist device to damage blood cells has generally been performed using blood from various species. Problems with this approach include the variability of blood sensitivity to mechanical stress in different species, preparation of blood including the adjustment of hematocrit to a standard value, changes in the mechanical properties of blood that occur during storage, and necessity to pool blood samples to obtain an adequate amount of blood for in vitro circulating systems. We investigated whether the mechanical degradation of a drag-reducing polymer (DRP) solution resulting in the loss of drag-reducing ability can indicate the degree of shear-induced blood damage within blood pumps. DRP solution (polyethylene oxide, 4,500 kDa, 1,000 ppm) or porcine blood were driven through a turbulent flow system by a centrifugal pump, either the Bio-Pump BPX-80 (Medtronic, Inc.) or CentriMag (Levitronix LLC) at a constant pressure gradient of 300 mm Hg for 120 minutes. DRP mechanical degradation was evaluated by reduction of flow rate and solution viscosity. A proposed index of DRP mechanical degradation (PDI) is similar to the normalized index of hemolysis (NIH) typically used to quantify the results of in vitro testing of blood pumps. Results indicate that the mechanical degradation of DRP solutions may provide a sensitive standard method for the evaluation of potential blood trauma produced by blood pumps without the use of blood.