Search

Hole transport layers (HTLs) play a vital role in organic solar cells (OSCs). In this work, a derivative of tetrathiafulvalene with four carboxyl groups TTA was introduced as a novel HTL to fabricate OSC with high performance. Displaying a better energy level match between HTL and active layers, the TTA based devices show a peak power conversion efficiency of 9.09%, which is comparable to the devices based on PEDOT:PSS. The favorable surface morphology recorded via atomic force microscopy, low series loss and charge recombination indicated by electrochemical impedance spectroscopy, synchronously verify the potential of TTA for application in OSCs as a valid kind of HTLs.

Tibetan pig is an important domestic mammal, providing products of high nutritional value for millions of people living in the Qinghai-Tibet Plateau. The genomes of mammalian gut microbiota encode a large number of carbohydrate-active enzymes, which are essential for the digestion of complex polysaccharides through fermentation. However, the current understanding of microbial degradation of dietary carbohydrates in the Tibetan pig gut is limited. In this study, we produced approximately 145 gigabases of metagenomic sequence data for the fecal samples from 11 Tibetan pigs. De novo assembly and binning recovered 322 metagenome-assembled genomes taxonomically assigned to 11 bacterial phyla and two archaeal phyla. Of these genomes, 191 represented the uncultivated microbes derived from novel prokaryotic taxa. Twenty-three genomes were identified as metagenomic biomarkers that were significantly abundant in the gut ecosystem of Tibetan pigs compared to the other low-altitude relatives. Further, over 13,000 carbohydrate-degrading genes were identified, and these genes were more abundant in some of the genomes within the five principal phyla: Firmicutes, Bacteroidetes, Spirochaetota, Verrucomicrobiota, and Fibrobacterota. Particularly, three genomes representing the uncultivated Verrucomicrobiota encode the most abundant degradative enzymes in the fecal microbiota of Tibetan pigs. These findings should substantially increase the phylogenetic diversity of specific taxonomic clades in the microbial tree of life and provide an expanded repertoire of biomass-degrading genes for future application to microbial production of industrial enzymes.

Background Yaks are able to utilize the gastrointestinal microbiota to digest plant materials. Although the cellulolytic bacteria in the yak rumen have been reported, there is still limited information on the diversity of the major microorganisms and putative carbohydrate-metabolizing enzymes for the degradation of complex lignocellulosic biomass in its gut ecosystem. Results Here, this study aimed to decode biomass-degrading genes and genomes in the yak fecal microbiota using deep metagenome sequencing. A comprehensive catalog comprising 4.5 million microbial genes from the yak feces were established based on metagenomic assemblies from 92 Gb sequencing data. We identified a full spectrum of genes encoding carbohydrate-active enzymes, three-quarters of which were assigned to highly diversified enzyme families involved in the breakdown of complex dietary carbohydrates, including 120 families of glycoside hydrolases, 25 families of polysaccharide lyases, and 15 families of carbohydrate esterases. Inference of taxonomic assignments to the carbohydrate-degrading genes revealed the major microbial contributors were Bacteroidaceae, Ruminococcaceae, Rikenellaceae, Clostridiaceae, and Prevotellaceae. Furthermore, 68 prokaryotic genomes were reconstructed and the genes encoding glycoside hydrolases involved in plant-derived polysaccharide degradation were identified in these uncultured genomes, many of which were novel species with lignocellulolytic capability. Conclusions Our findings shed light on a great diversity of carbohydrate-degrading enzymes in the yak gut microbial community and uncultured species, which provides a useful genetic resource for future studies on the discovery of novel enzymes for industrial applications.

The damping properties of polybutyl methacrylate (PBMA)/aromatic petroleum resin (C9) composite were investigated in this work. In particular, a trace of styrene (St) was introduced to copolymerize with PBMA to improve the compatibility between C9 and matrix. The structure of the copolymer, P(BMA-co-St), was characterized by FTIR and 1HNMR. The P(BMA-co-St)/C9 composites were tested by differencial scanning calorimetry (DSC), scanning electron microscopy (SEM) and dynamical mechanical analysis (DMA). DSC curves of all P(BMA-co-1wt%St)/C9 composites expressed only one glass transition temperature (Tg). SEM images showed that C9 had good compatibility with the matrix after St was introduced. DMA curves indicated that the addition of C9 had a positive effect on the damping properties of PBMA. The loss tangent (tan&delta, ) peak moved to a higher temperature with the increment content of C9, and the effective damping temperature range increased significantly. The influence of aromatic resin C9 and aliphatic resin (C5) on PBMA damping performance was compared. It was further shown that C9 with benzene ring effectively improved the damping performance of PBMA.

Polyoxymethylene dimethyl ethers (DMMn) have attracted particular attention in industry as excellent oxygenated fuel additives. This study aims to reveal the liquid–liquid equilibrium (LLE) values regarding ternary mixtures {water + methylal (DMM1) + 4-methyl-2-pentanol (MIBC)}, {water + DMM2 + MIBC}, {water + DMM3 + MIBC}, and {water + DMM4 + MIBC} at 298.2 and 308.2 K under 101.3 kPa. Distribution factor and selectivity were utilized to assess the extracting capabilities of the selected extractant. The well known Hand equation and Othmer–Tobias equation were utilized to test the consistency of the LLE values. In addition, the experimental results were correlated by the UNIQUAC and NRTL thermodynamic models with all of the root-mean-square deviation values less than 0.0127,which indicated that both models agree well with the experimental tie-line data.

Our research extends the knowledge into the liquid–liquid extraction regarding ternary mixtures of water + cyclopentanone + extractants (methylcyclohexane and propyl acetate) at 308.2, 318.2, and 328.2 K and 101.3 kPa. The extracting capabilities of the selected extractants were explored when it came to the distribution coefficient and selectivity on the basis of the liquid–liquid equilibrium values, while the consistency of the dependability of the tie-line values was corroborated utilizing both the Bachman and Hand empirical equations. In addition, the binary interaction energy parameters of the compounds were achieved by two classic activity coefficient models (i.e., NRTL and UNIQUAC); satisfactory results were yielded with all the fitting root-mean square deviations (rmsd %) ≤ 0.71.

Inspired by the intelligent foraging behavior of ant colony, this paper proposes an improved ant colony foraging algorithm (AS-N) for complex engineering optimization problems. The main idea of AS-N is to add negative feedback. The algorithm proposed in this paper increases the negative feedback information to adjust the path selection strategy and pheromone updating mechanism. The new algorithm is tested on the hospital ward color planning problem. Statistical analysis highlights the significant performance improvement due to the life-cycle foraging strategy and shows that the proposed algorithm outperforms the reference algorithms.

In this paper, the rational design and synthesis of ZIF-8-derived ternary ZnO/ZnCo

Zeolitic imidazolate frameworks have stimulated great attention due to their potential applications in energy storage, catalysis, gas sensing, drug delivery etc. In this paper, the three-dimensional porous nanomaterial Co3O4/ZnCo2O4/CuO with hollow polyhedral nanocage structures and highly enhanced electrochemical performances was synthesized successfully by a zeolitic imidazolate framework-67 route. The composites hold the shape of the ZIF-67 templates well and the shell has multiple compositions. In the process, we first synthesized the nanostructure hydroxide precursors and then transformed them into the corresponding metal oxide composites by thermal annealing in air. In addition, the mass ratio of Zn to Cu in this material is discussed and optimized. We found that when the mass ratio is 3, the composite material has better electrochemical properties. When applied as an electrode material, Co3O4/ZnCo2O4/CuO-1 shows enhanced pseudocapacitive properties and good cycling stability compared with Co3O4/ZnCo2O4, Co3O4/CuO and Co3O4/ZnCo2O4/CuO-2, and Co3O4/ZnCo2O4/CuO-3. The assembled Co3O4/ZnCo2O4/CuO-1//AC hybrid device can be reversibly cycled in a large potential range of 0-1.6 V and can deliver a high energy density of 35.82 W h kg-1 as well as the maximum power density of 4799.25 W kg-1.

In recent years, the electrochemical properties of supercapacitors have been greatly improved due to continuous improvement in their composite materials. In this study, an urchin-like MgCo2O4@PPy/NF (MgCo2O4@polypyrrole/Ni foam) core-shell structure composite material was successfully developed as an electrode for supercapacitors. The MCP-2 composite material, obtained by a hydrothermal method and in situ chemical oxidative polymerization, shows a high specific capacitance of 1079.6 F g-1 at a current density of 1 A g-1, which is much higher than that of MC (783.6 F g-1) under the same conditions. Simultaneously, it has low resistance and an excellent cycling stability of 97.4% after 1000 cycles. Furthermore, an all-solid-state asymmetric supercapacitor (ASC) was assembled using MCP-2 as the positive electrode and activated carbon (AC) as the negative electrode. The MCP-2//AC ASC exhibits high specific capacitance (94 F g-1 at a current density of 0.4 A g-1), high energy density (33.4 W h kg-1 at a power density of 320 W kg-1), high volumetric energy density (17.18 mW h cm-3 at a volumetric power density of 0.16 W cm-3) and excellent cycling stability (retaining 91% of the initial value after 10 000 cycles). Simultaneously, the device has low leakage current and excellent self-discharge characteristics. All these results indicate that the MCP-2//AC ASC is a good energy storage device; it can support the function of two LEDs for 20 minutes. These results indicate that the MCP-2//AC ASC will play an important role in energy structures in the future.

Purpose – The purpose of this paper is to explore the evolving mechanism of urban roadway network. With the consideration of self-organization effect and planning effect during evolution, the authors try to demonstrate the impact of preferential attachment, module scale and module structure on the evolving network model. Design/methodology/approach – The roadway network is built in the form of abstract network by dual approach. By using the evolving model of modular growth, the authors analyze the effects and mechanism of the evolving process. Then through numerical analysis, the impact of evolving effects on urban roadway network topology structure is discussed from the aspects of preferential attachment, module scale and module structure. Findings – The module structure property, small-world property and scale-free property of roadway network can be affected with various degrees by the change of preferential attachment and module scale. However, the impact of module structure on network properties is small, which can be ignored. Therefore, in practice, the self-organization effect and planning effect of evolving network can be reached by changing the preferential attachment and module scale, so as to generate the network structure with specific properties. Research limitations/implications – Some local events, such as road extensions, road demolition and intersection rebuilding, exist during the evolving process under real-world situation. While those cases have not been considered in preferential attachment. Therefore, researchers are encouraged to take these factors into consideration in further research. Practical implications – The paper has implications for practice in urban transportation planning and roadway constructions, which can help to guide the planning of urban roadway and to adjust or restore partial network when broken down according to the evolving law. Originality/value – The impact of preferential attachment, module scale and module structure on the evolving network model is measured. And the relationship between different network properties can be used to build some patterns of network. From this point of view, the development of urban roadway network can be predicted and intervened.