Search

Massive Dirac fermions are low-energy electronic excitations characterized by a hyperbolic band dispersion. They play a central role in several emerging physical phenomena such as topological phase transitions, anomalous Hall effects and superconductivity. This work demonstrates that massive Dirac fermions can be controllably induced by lithographically patterning superstructures of nanoscale holes in a graphene device. Their band dispersion is systematically visualized using angle-resolved photoemission spectroscopy with nanoscale spatial resolution. A linear scaling of effective mass with feature sizes is discovered, underlining the Dirac nature of the superstructures. In situ electrostatic doping dramatically enhances the effective hole mass and leads to the direct observation of an electronic band gap that results in a peak-to-peak band separation of (0.64 $\pm$ 0.03) eV, which is shown via first-principles calculations to be strongly renormalized by carrier-induced screening. The presented methodology outlines a new approach for band structure engineering guided by directly viewing structurally- and electrically-tunable massive Dirac quasiparticles in lithographic superstructures at the nanoscale., Comment: 37 pages, 12 figures (includes supporting information). A revised version has been published in ACS Nano

Modification of the electronic structure of quantum matter by ad atom deposition allows for directed fundamental design of electronic and magnetic properties. This concept is utilized in the present work in order to tune the surface electronic structure of magnetic topological insulators based on MnBi2Te4. The topological bands of these systems are typically strongly electron-doped and hybridized with a manifold of surface states that places the salient topological states out of reach of electron transport and practical applications. In this work, micro-focused angle-resolved photoemission spectroscopy (microARPES) provides direct access to the termination-dependent dispersion of MnBi2Te4and MnBi4Te7during in situ deposition of rubidium atoms. The resulting band structure changes are found to be highly complex, encompassing coverage-dependent am-bipolar doping effects, removal of surface state hybridization and the collapse of a surface state band gap. In addition, a doping-dependent band bending is found to give rise to tunable quantum well states. This wide range of observed electronic structure modifications could provide new ways to exploit the topological states and the rich surface electronic structures of manganese bismuthtellurides.

The semiconductor ReSe$_2$ is characterized by a strongly anisotropic optical absorption and is therefore promising as an optically active component in two-dimensional heterostructures. However, the underlying femtosecond dynamics of photoinduced excitations in such materials has not been sufficiently explored. Here, we apply an infrared optical excitation to single-layer ReSe$_2$ grown on a bilayer graphene substrate and monitor the temporal evolution of the excited state signal using time- and angle-resolved photoemission spectroscopy. We measure an optical gap of $(1.53 \pm 0.02)$ eV, consistent with resonant excitation of the lowest exciton state. The exciton distribution is tunable via the linear polarization of the pump pulse and exhibits a biexponential decay with time constants given by $\tau_1 = (110 \pm 10)$ fs and $\tau_2 = (650 \pm 70)$ fs, facilitated by recombination via an in-gap state that is pinned at the Fermi level. By extracting the momentum-resolved exciton distribution we estimate its real-space radial extent to be greater than 17.1 \AA, implying significant exciton delocalization due to screening from the bilayer graphene substrate., Comment: 6 pages, 4 figures

The integration of metallic contacts with two-dimensional (2D) semiconductors is routinely required for the fabrication of nanoscale devices. However, nanometer-scale variations in the 2D/metal interface can drastically alter the local optoelectronic properties. Here, we map local excitonic changes of the 2D semiconductor MoS2 in contact with Au. We utilize a suspended and epitaxially grown 2D/metal platform that allows correlated electron energy-loss spectroscopy (EELS) and angle resolved photoelectron spectroscopy (nanoARPES) mapping. Spatial localization of MoS2 excitons uncovers an additional EELS peak related to the MoS2/Au interface. NanoARPES measurements indicate that Au-S hybridization decreases substantially with distance from the 2D/metal interface, suggesting that the observed EELS peak arises due to dielectric screening of the excitonic Coulomb interaction. Our results suggest that increasing the van der Waals distance could optimize excitonic spectra of mixed-dimensional 2D/3D interfaces and highlight opportunities for Coulomb engineering of exciton energies by the local dielectric environment or moiré engineering.

Heterostructures composed of the intrinsic magnetic topological insulator MnBi$_2$Te$_4$ and its non-magnetic counterpart Bi$_2$Te$_3$ host distinct surface band structures depending on the stacking order and exposed termination, allowing fine control of their magnetic, electronic and optical properties. Here, we probe the ultrafast dynamical response of MnBi$_2$Te$_4$ and MnBi$_4$Te$_7$ following near-infrared optical excitation using time- and angle-resolved photoemission spectroscopy. We gain access to the out-of-equilibrium surface electronic structure of both MnBi$_2$Te$_4$ and Bi$_2$Te$_3$ surface terminations of MnBi$_4$Te$_7$, revealing an instantaneous occupation of states that are resonant with the optical excitation in the Bi$_2$Te$_3$ layer followed by carrier extraction into the adjacent MnBi$_2$Te$_4$ layers with a laser fluence-tunable delay of up to 350 fs. The ensuing thermal relaxation processes are driven by in-plane phonon scattering with significantly slower relaxation times in the magnetic MnBi$_2$Te$_4$ septuple layers. The competition of interlayer charge transfer and intralayer phonon scattering establishes MnBi$_2$Te$_4$-based compounds as a platform for controlling ultrafast charge transfer processes in combination with magnetism and topology in van der Waals heterostructures., 17 pages, 4 figures

Using light to control transient phases in quantum materials is an emerging route to engineer new properties and functionality, with both thermal and non-thermal phases observed out of equilibrium. Transient phases are expected to be heterogeneous, either through photo-generated domain growth or by generating topological defects, and this impacts the dynamics of the system. However, this nanoscale heterogeneity has not been directly observed. Here we use time- and spectrally resolved coherent X-ray imaging to track the prototypical light-induced insulator-to-metal phase transition in vanadium dioxide on the nanoscale with femtosecond time resolution. We show that the early-time dynamics are independent of the initial spatial heterogeneity and observe a 200 fs switch to the metallic phase. A heterogeneous response emerges only after hundreds of picoseconds. Through spectroscopic imaging, we reveal that the transient metallic phase is a highly orthorhombically strained rutile metallic phase, an interpretation that is in contrast to those based on spatially averaged probes. Our results demonstrate the critical importance of spatially and spectrally resolved measurements for understanding and interpreting the transient phases of quantum materials.

We investigated how SrOx segregates on a Nb doped SrTiO3 (100) surface by in air annealing. Using atomic force and photoemission electron microscopes, we can directly visualize the morphology and the electronic phase changes with SrOx segregation. SrOx islands less than 2 micron meter in size and 1-5 unit cells thick nucleate first and grow in a labyrinth domain pattern. After prolonged annealing, SrOx forms a ~10 nm thick film. We show that the domain pattern can be controlled by introducing a surface miscut angle of SrTiO3. Additionally, the segregated SrOx has a lower work function, compared to that of SrTiO3. These results suggest that the control and tunability of SrOx segregation is applicable to the design of a new functional electronic devices in the semiconducting SrTiO3 based heterostructure.

The quasiparticle spectra of atomically thin semiconducting transition metal dichalcogenides (TMDCs) and their response to an ultrafast optical excitation critically depend on interactions with the underlying substrate. Here, we present a comparative time- and angle-resolved photoemission spectroscopy (TR-ARPES) study of the transient electronic structure and ultrafast carrier dynamics in the single- and bilayer TMDCs MoS$_2$ and WS$_2$ on three different substrates: Au(111), Ag(111) and graphene/SiC. The photoexcited quasiparticle bandgaps are observed to vary over the range of 1.9-2.3 eV between our systems. The transient conduction band signals decay on a sub-100 fs timescale on the metals, signifying an efficient removal of photoinduced carriers into the bulk metallic states. On graphene, we instead observe two timescales on the order of 200 fs and 50 ps, respectively, for the conduction band decay in MoS$_2$. These multiple timescales are explained by Auger recombination involving MoS$_2$ and in-gap defect states. In bilayer TMDCs on metals we observe a complex redistribution of excited holes along the valence band that is substantially affected by interactions with the continuum of bulk metallic states., Comment: 10 pages, 4 figures

Funding: We gratefully acknowledge funding from VILLUM FONDEN through the Young Investigator Program (Grant. No.15375) and the Centre of Excellence for Dirac Materials (Grant. No. 11744), the Danish Council for Independent Research, Natural Sciences under the Sapere Aude program (Grant Nos. DFF-9064-00057B and DFF-6108-00409) and the Aarhus University Research Foundation. This work is also supported by National Research Foundation (NRF) grants funded by the Korean government (nos. NRF-2020R1A2C200373211 and 2019K1A3A7A09033389) and by the International MaxPlanck Research School for Chemistry and Physics of Quantum Materials (IMPRS-CPQM). The authors also acknowledge The Royal Society and The Leverhulme Trust. R.S acknowledges financial support provided by the Ministry of Science and Technology in Taiwan under project number MOST-108-2112-M-001-049-MY2 & MOST 109-2124-M-002-001 and Sinica funded i-MATE financial Support AS-iMATE-109-13. Access to the Artemis Facility was funded by STFC. The Advanced Light Source is supported by the Director, Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231.

We study the formation of epitaxial graphene on Ru(0001) using fast x-ray photoelectron spectroscopy during the growth process. The assignment of different C 1s and Ru 3d core level components and their evolution during the growth process gives a detailed insight into the graphene formation and the strongly varying graphene-Ru interaction strength within the large moire unit cell. Subsequent intercalation of oxygen can be achieved at elevated temperature and the core level spectra show a conversion of the strongly corrugated to quasi free-standing graphene, characterised by a single narrow C 1s component. This conversion and the accompanying flattening of the graphene layer is also confirmed by x-ray photoelectron diffraction. The effect of oxygen intercalation on the electronic structure is studied using angle-resolved photoemission of the valence band states. For graphene/Ru(0001), the strong graphene-substrate hybridisation disrupts the {\pi}-band dispersion but oxygen intercalation fully restores the {\pi}-band with a strong p-doping that shifts the Dirac point 785 meV above the Fermi level. The doping of the system is highly tunable, as the additional exposure to rubidium can convert the carrier filling to n-type with the Dirac point 970 meV below the Fermi level., Comment: 10 pages, 7 figures

The transition-metal dichalcogenide VSe

To pinpoint the electronic and structural mechanisms that affect intrinsic and extrinsic performance limits of 2D material devices, it is of critical importance to resolve the electronic properties on the mesoscopic length scale of such devices under operating conditions. Herein, angle‐resolved photoemission spectroscopy with nanoscale spatial resolution (nanoARPES) is used to map the quasiparticle electronic structure of a twisted bilayer graphene device. The dispersion and linewidth of the Dirac cones associated with top and bottom graphene layers are determined as a function of spatial position on the device under both static and operating conditions. The analysis reveals that microscopic rotational domains in the two graphene layers establish a range of twist angles from 9.8° to 12.7°. Application of current and electrostatic gating lead to strong electric fields with peak strengths of 0.75 V/μm at the rotational domain boundaries in the device. These proof‐of‐principle results demonstrate the potential of nanoARPES to link mesoscale structural variations with electronic states in operating device conditions and to disentangle such extrinsic factors from the intrinsic quasiparticle dispersion.

Physical review / B 104(16), L161104 (2021). doi:10.1103/PhysRevB.104.L161104, We show that the presence of a transiently excited hot electron gas in graphene leads to a substantial broadening of the C 1s line probed by time-resolved x-ray photoemission spectroscopy. The broadening is found to be caused by an exchange of energy and momentum between the photoemitted core electron and the hot electron gas, rather than by vibrational excitations. This interpretation is supported by a quantitative line-shape analysis that accounts for the presence of the excited electrons. Fitting the spectra to this model directly yields the electronic temperature of the system, in good agreement with electronic temperature values obtained from valence band data. Furthermore, we show how the momentum change of the outgoing core electrons leads to a detectable but very small change in the time-resolved photoelectron diffraction pattern and to a nearly complete elimination of the core level binding energy variation associated with the presence of a narrow �� band in the C 1s state., Published by Inst., Woodbury, NY

Many properties of layered materials change as they are thinned from their bulk forms down to single layers, with examples including indirect-to-direct band gap transition in 2H semiconducting transition metal dichalcogenides as well as thickness-dependent changes in the valence band structure in post-transition-metal monochalcogenides and black phosphorus. Here, we use angle-resolved photoemission spectroscopy to study the electronic band structure of monolayer ReSe

Pnictogens have multiple allotropic forms resulting from their ns2 np3 valence electronic configuration, making them the only elemental materials to crystallize in layered van der Waals (vdW) and quasi-vdW structures throughout the group. Light group VA elements are found in the layered orthorhombic A17 phase such as black phosphorus, and can transition to the layered rhombohedral A7 phase at high pressure. On the other hand, bulk heavier elements are only stable in the A7 phase. Herein, we demonstrate that these two phases not only co-exist during the vdW growth of antimony on weakly interacting surfaces, but also undertake a spontaneous transformation from the A17 phase to the thermodynamically stable A7 phase. This metastability of the A17 phase is revealed by real-time studies unraveling its thickness-driven transition to the A7 phase and the concomitant evolution of its electronic properties. At a critical thickness of ~4 nm, A17 antimony undergoes a diffusionless shuffle transition from AB to AA stacked alpha-antimonene followed by a gradual relaxation to the A7 bulk-like phase. Furthermore, the electronic structure of this intermediate phase is found to be determined by surface self-passivation and the associated competition between A7- and A17-like bonding in the bulk. These results highlight the critical role of the atomic structure and interfacial interactions in shaping the stability and electronic characteristics of vdW layered materials, thus enabling a new degree of freedom to engineer their properties using scalable processes.

Integrating the carrier tunability of a functional two-dimensional material electronic device with a direct probe of energy- and momentum-resolved electronic excitations is essential to gain insights on how many-body interactions are influenced during device operation. Here, we use micro-focused angle-resolved photoemission in order to analyze many-body interactions in back-gated graphene supported on hexagonal boron nitride. By extracting the doping-dependent quasiparticle dispersion and self-energy, we observe how these interactions renormalize the Dirac cone and impact the electron mobility of our device. Our results are not only limited to a finite energy range around the Fermi level, as in electron transport measurements, but describe interactions on a much wider energy scale, extending beyond the regime of hot carrier excitations., Comment: 6 pages, 3 figures

We show the first direct observation of minibands in the electronic structure of a twisted heterobilayer using microfocused ARPES., Stacking two-dimensional (2D) van der Waals materials with different interlayer atomic registry in a heterobilayer causes the formation of a long-range periodic superlattice that may bestow the heterostructure with properties such as new quantum fractal states or superconductivity. Recent optical measurements of transition metal dichalcogenide (TMD) heterobilayers have revealed the presence of hybridized interlayer electron-hole pair excitations at energies defined by the superlattice potential. The corresponding quasiparticle band structures, so-called minibands, have remained elusive, and no such features have been reported for heterobilayers composed of a TMD and another type of 2D material. We introduce a new x-ray capillary technology for performing microfocused angle-resolved photoemission spectroscopy with a spatial resolution of ~1 μm, and directly observe minibands at certain twist angles in mini Brillouin zones (mBZs). We discuss their origin in terms of initial and final state effects by analyzing their dispersion in distinct mBZs.

Many properties of layered materials change as they are thinned from their bulk forms down to single layers, with examples including indirect-to-direct band gap transition in 2H semiconducting transition metal dichalcogenides as well as thickness-dependent changes in the valence band structure in post-transition metal monochalcogenides and black phosphorus. Here, we use angle-resolved photoemission spectroscopy to study the electronic band structure of monolayer ReSe$_{2}$, a semiconductor with a distorted 1T structure and in-plane anisotropy. By changing the polarization of incoming photons, we demonstrate that for ReSe$_{2}$, in contrast to the 2H materials, the out-of-plane transition metal $d_{z^{2}}$ and chalcogen $p_{z}$ orbitals do not contribute significantly to the top of the valence band which explains the reported weak changes in the electronic structure of this compound as a function of layer number. We estimate a band gap of 1.7 eV in pristine ReSe$_{2}$ using scanning tunneling spectroscopy and explore the implications on the gap following surface-doping with potassium. A lower bound of 1.4 eV is estimated for the gap in the fully doped case, suggesting that doping-dependent many-body effects significantly affect the electronic properties of ReSe$_{2}$. Our results, supported by density functional theory calculations, provide insight into the mechanisms behind polarization-dependent optical properties of rhenium dichalcogenides and highlight their place amongst two-dimensional crystals., Comment: 37 pages (including Supporting Information), 7 figures in the main text

Assembling transition metal dichalcogenides (TMDCs) at the two-dimensional (2D) limit is a promising approach for tailoring emerging states of matter such as superconductivity or charge density waves (CDWs). Single-layer (SL) VSe$_2$ stands out in this regard because it exhibits a strongly enhanced CDW transition with a higher transition temperature compared to the bulk in addition to an insulating phase with an anisotropic gap at the Fermi level, causing a suppression of anticipated 2D ferromagnetism in the material. Here, we investigate the interplay of electronic and lattice degrees of freedom that underpin these electronic phases in SL VSe$_2$ using ultrafast pump-probe photoemission spectroscopy. In the insulating state, we observe a light-induced closure of the energy gap on a timescale of 480 fs, which we disentangle from the ensuing hot carrier dynamics. Our work thereby reveals that the phase transition in SL VSe$_2$ is driven by electron-lattice coupling and demonstrates the potential for controlling electronic phases in 2D materials with light., Comment: 23 pages including supplementary information, 3 figures in the main text and 6 figures in the supplemental text

The presence of an electrical transport current in a material is one of the simplest and most important realisations of non-equilibrium physics. The current density breaks the crystalline symmetry and can give rise to dramatic phenomena, such as sliding charge density waves [1], insulator-to-metal transitions [2,3] or gap openings in topologically protected states [4]. Almost nothing is known about how a current influences the electron spectral function, which characterizes most of the solid's electronic, optical and chemical properties. Here we show that angle-resolved photoemission spectroscopy with a nano-scale light spot (nanoARPES) provides not only a wealth of information on local equilibrium properties, but also opens the possibility to access the local non-equilibrium spectral function in the presence of a transport current. Unifying spectroscopic and transport measurements in this way allows non-invasive local measurements of the composition, structure, many-body effects and carrier mobility in the presence of high current densities., Comment: 9 pages, 8 figures

Control of atomic-scale interfaces between materials with distinct electronic structures is crucial for the design and fabrication of most electronic devices. In the case of two-dimensional materials, disparate electronic structures can be realized even within a single uniform sheet, merely by locally applying different vertical gate voltages. Here, we utilize the inherently nano-structured single layer and bilayer graphene on silicon carbide to investigate lateral electronic structure variations in an adjacent single layer of tungsten disulfide (WS2). The electronic band alignments are mapped in energy and momentum space using angle-resolved photoemission with a spatial resolution on the order of 500 nm (nanoARPES). We find that the WS2 band offsets track the work function of the underlying single layer and bilayer graphene, and we relate such changes to observed lateral patterns of exciton and trion luminescence from WS2., Sharp atomic interfaces between materials dictate the interface’s electronic properties. The authors use angle-resolved photoemission spectroscopy with a spatial resolution of ~500 nm to investigate the nanoscale electronic band structure and band alignment in a lateral heterostructure composed of WS2 placed on alternating nano-stripes of monolayer and bilayer graphene.

In two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDs), new electronic phenomena such as tunable band gaps and strongly bound excitons and trions emerge from strong many-body effects, beyond spin-orbit coupling- and lattice symmetry-induced spin and valley degrees of freedom. Combining single-layer (SL) TMDs with other 2D materials in van der Waals heterostructures offers an intriguing means of controlling the electronic properties through these many-body effects via engineered interlayer interactions. Here, we employ micro-focused angle-resolved photoemission spectroscopy (microARPES) and in-situ surface doping to manipulate the electronic structure of SL WS$_2$ on hexagonal boron nitride (WS$_2$/h-BN). Upon electron doping, we observe an unexpected giant renormalization of the SL WS$_2$ valence band (VB) spin-orbit splitting from 430~meV to 660~meV, together with a band gap reduction of at least 325~meV, attributed to the formation of trionic quasiparticles. These findings suggest that the electronic, spintronic and excitonic properties are widely tunable in 2D TMD/h-BN heterostructures, as these are intimately linked to the quasiparticle dynamics of the materials., Comment: 14 pages, 4 figures. Address correspondence to ulstrup@phys.au.dk or cmjozwiak@lbl.gov

A mismatch of atomic registries between single-layer transition metal dichalcogenides (TMDs) in a two-dimensional (2D) van der Waals heterostructure produces a moiré superlattice with a periodic potential, which can be fine-tuned by introducing a twist angle between the materials. This approach is promising both for controlling the interactions between the TMDs and for engineering their electronic band structures, yet direct observation of the changes to the electronic structure introduced with varying twist angle has so far been missing. Here, we probe heterobilayers comprised of single-layer MoS2 and WS2 with twist angles ranging from 2∘ to 20∘ and determine the twist angle-dependent evolution of the electronic band structure using micro-focused angle-resolved photoemission spectroscopy. We find strong interlayer hybridization between MoS2 and WS2 electronic states at the Γ ˉ -point of the Brillouin zone, leading to a shift of the valence band maximum in the heterostructure. Replicas of the hybridized states are observed at the center of twist angle-dependent moiré mini Brillouin zones. We confirm that these replica features arise from the inherent moiré potential by comparing our experimental observations with density functional theory calculations of the superlattice dispersion. Our direct visualization of these features underscores the potential of using twisted heterobilayer semiconductors to engineer hybrid electronic states and superlattices that alter the electronic and optical properties of 2D heterostructures for a wide range of twist angles.

The unique electronic band structure of indium nitride InN, part of the industrially significant III-N class of semiconductors, offers charge transport properties with great application potential due to its robust n-type conductivity. Here, we explore the water sensing mechanism of InN thin films. Using angle-resolved photoemission spectroscopy, core level spectroscopy, and theory, we derive the charge carrier density and electrical potential of a two-dimensional electron gas, 2DEG, at the InN surface and monitor its electronic properties upon in situ modulation of adsorbed water. An electric dipole layer formed by water molecules raises the surface potential and accumulates charge in the 2DEG, enhancing surface conductivity. Our intuitive model provides a novel route toward understanding the water sensing mechanism in InN and, more generally, for understanding sensing material systems beyond InN.

Author(s): Shevitski, B; Ulstrup, S; Koch, RJ; Cai, H; Tongay, S; Moreschini, L; Jozwiak, C; Bostwick, A; Zettl, A; Rotenberg, E; Aloni, S | Abstract: Transition-metal monochalcogenides comprise a class of two-dimensional materials with electronic band gaps that are highly sensitive to material thickness and chemical composition. Here, we explore the tunability of the electronic excitation spectrum in GaSe by using angle-resolved photoemission spectroscopy. The electronic structure of the material is modified by in situ potassium deposition as well as by forming GaSxSe1-x alloy compounds. We find that potassium-dosed samples exhibit a substantial change of the dispersion around the valence-band maximum (VBM). The observed band dispersion resembles that of a single tetralayer and is consistent with a transition from the direct-gap character of the bulk to the indirect-gap character expected for monolayer GaSe. Upon alloying with sulfur, we observe a phase transition from AB to AA′ stacking. Alloying also results in a rigid energy shift of the VBM towards higher binding energies, which correlates with a blueshift in the luminescence. The increase of the band gap upon sulfur alloying does not appear to change the dispersion or character of the VBM appreciably, implying that it is possible to engineer the gap of these materials while maintaining their salient electronic properties.

The intentional formation of defects in transition-metal dichalcogenides, such as MoS2, is an attractive way to modify the electronic and chemical properties of this class of 2D materials. However, the mechanisms and methods available for selective doping or modification of the basal plane must be improved. Here we investigate the process of O defect formation in epitaxial single-layer MoS2 on Au(1 1 1) using scanning tunneling microscopy (STM) and ambient pressure x-ray photoelectron spectroscopy (AP-XPS) during oxidation with O2 and H2O gas from low vacuum to the mbar range. Both oxidants result in exchange of S in the upper part of the basal plane with O, in line with air exposure experiments. Temperature-dependent measurements show that this is an activated process with an experimentally estimated reaction barrier of ∼0.79 ± 0.20 eV. We surprisingly find that the morphology of the MoS2 flakes and their edges remain intact in O2, even for relatively high degrees of basal plane O exchange, in contrast to the oxidation behavior of exfoliated single-layer MoS2. From analysis of atom-resolved STM images of the MoS2 edges, we can attribute this unusual stability to a passivating effect of excess edge sulfur species adsorbed under the sulfiding conditions of the MoS2 synthesis in H2S gas. We thus demonstrate that control over pre-sulfidation of the edges, temperature and pressure during oxidation can be used in a fast process to form strongly O doped single-layer MoS2 with no degradation of the initial shape and edge structure of the epitaxial MoS2 sheet.

Two-dimensional materials with engineered composition and structure will provide designer materials beyond conventional semiconductors. However, the potentials of defect engineering remain largely untapped, because it hinges on a precise understanding of electronic structure and excitonic properties, which are not yet predictable by theory alone. Here, we utilize correlative, nanoscale photoemission spectroscopy to visualize how local introduction of defects modifies electronic and excitonic properties of two-dimensional materials at the nanoscale. As a model system, we study chemical vapor deposition grown monolayer WS2, a prototypical, direct gap, two-dimensional semiconductor. By cross-correlating nanoscale angle-resolved photoemission spectroscopy, core level spectroscopy, and photoluminescence, we unravel how local variations in defect density influence electronic structure, lateral band alignment, and excitonic phenomena in synthetic WS2 monolayers.

Two-dimensional materials with engineered composition and structure will provide designer materials beyond conventional semiconductors. However, the potentials of defect engineering remain largely untapped, because it hinges on a precise understanding of electronic structure and excitonic properties, which are not yet predictable by theory alone. Here, we utilize correlative, nanoscale photoemission spectroscopy to visualize how local introduction of defects modifies electronic and excitonic properties of two-dimensional materials at the nanoscale. As a model system, we study chemical vapor deposition grown monolayer WS

In this work, we provide an effective model to evaluate the one-electron dipole matrix elements governing optical excitations and the photoemission process of single-layer (SL) and bilayer (BL) transition metal dichalcogenides. By utilizing a $\vec{k} \cdot \vec{p}$ Hamiltonian, we calculate the photoemission intensity as observed in angle-resolved photoemission from the valence bands around the $\bar{K}$-valley of MoS$_2$. In SL MoS$_2$ we find a significant masking of intensity outside the first Brillouin zone, which originates from an in-plane interference effect between photoelectrons emitted from the Mo $d$ orbitals. In BL MoS$_2$ an additional inter-layer interference effect leads to a distinctive modulation of intensity with photon energy. Finally, we use the semiconductor Bloch equations to model the optical excitation in a time- and angle-resolved pump-probe photoemission experiment. We find that the momentum dependence of an optically excited population in the conduction band leads to an observable dichroism in both SL and BL MoS$_2$., 10 pages, 6 figures

Inversion-symmetric crystals are optically isotropic and thus naively not expected to show dichroism effects in optical absorption and photoemission processes. Here, we find a strong linear dichroism effect (up to 42.4%) in the conduction band of inversion-symmetric bilayer MoS$_2$, when measuring energy- and momentum-resolved snapshots of excited electrons by time- and angle-resolved photoemission spectroscopy. We model the polarization-dependent photoemission intensity in the transiently-populated conduction band using the semiconductor Bloch equations and show that the observed dichroism emerges from intralayer single-particle effects within the isotropic part of the dispersion. This leads to optical excitations with an anisotropic momentum-dependence in an otherwise inversion symmetric material., Comment: 10 pages including supporting information, 3 figures in the main paper and 4 figures in the supporting information

The discovery of new families of exfoliatable 2D crystals that have diverse sets of electronic, optical, and spin-orbit coupling properties, enables the realization of unique physical phenomena in these few-atom thick building blocks and in proximity to other materials. Herein, using NaSn2As2 as a model system, we demonstrate that layered Zintl phases having the stoichiometry ATt2Pn2 (A = Group 1 or 2 element, Tt = Group 14 tetrel element and Pn = Group 15 pnictogen element) and feature networks separated by van der Waals gaps can be readily exfoliated with both mechanical and liquid-phase methods. We identified the symmetries of the Raman active modes of the bulk crystals via polarized Raman spectroscopy. The bulk and mechanically exfoliated NaSn2As2 samples are resistant towards oxidation, with only the top surface oxidizing in ambient conditions over a couple of days, while the liquid-exfoliated samples oxidize much more quickly in ambient conditions. Employing angle-resolved photoemission spectroscopy (ARPES), density functional theory (DFT), and transport on bulk and exfoliated samples, we show that NaSn2As2 is a highly conducting 2D semimetal, with resistivities on the order of 10-6 {\Omega} m. Due to peculiarities in the band structure, the dominating p-type carriers at low temperature are nearly compensated by the opening of n-type conduction channels as temperature increases. This work further expands the family of exfoliatable 2D materials to layered van der Waals Zintl phases, opening up opportunities in electronics and spintronics.

The possibility of triggering correlated phenomena by placing a singularity of the density of states near the Fermi energy remains an intriguing avenue towards engineering the properties of quantum materials. Twisted bilayer graphene is a key material in this regard because the superlattice produced by the rotated graphene layers introduces a van Hove singularity and flat bands near the Fermi energy that cause the emergence of numerous correlated phases, including superconductivity. While the twist angle-dependence of these properties has been explored, direct demonstration of electrostatic control of the superlattice bands over a wide energy range has, so far, been critically missing. This work examines a functional twisted bilayer graphene device using in-operando angle-resolved photoemission with a nano-focused light spot. A twist angle of 12.2$^{\circ}$ is selected such that the superlattice Brillouin zone is sufficiently large to enable identification of van Hove singularities and flat band segments in momentum space. The doping dependence of these features is extracted over an energy range of 0.4 eV, expanding the combinations of twist angle and doping where they can be placed at the Fermi energy and thereby induce new correlated electronic phases in twisted bilayer graphene., Comment: 16 pages, 4 figures. A revised version of the manuscript has been accepted for publication in Advanced Materials

BaTiO${}_{3}$ (BTO) is one of the most important ferroelectric oxides. Its most common source of uncontrolled doping, the oxygen vacancy, releases free electrons that confine in a two-dimensional electron gas (2DEG) at the surface. This 2DEG can be readily monitored by angle-resolved photoemission, and be used to measure the defect dynamics in ultrathin BTO films. The authors reveal two remarkable properties: first, oxygen defects close to the thin film surface are preferably in a charge state of 2+, which limits charge carrier trapping. Second, these defects migrate even below room temperature, fostering significant surface charge carrier density fluctuations that ultimately quench the 2DEG.

Emergent phenomena driven by electronic reconstructions in oxide heterostructures have been intensively discussed. However, the role of these phenomena in shaping the electronic properties in van der Waals heterointerfaces has hitherto not been established. By reducing the material thickness and forming a heterointerface, we find two types of charge-ordering transitions in monolayer VSe2 on graphene substrates. Angle-resolved photoemission spectroscopy (ARPES) uncovers that Fermi-surface nesting becomes perfect in ML VSe2. Renormalization group analysis confirms that imperfect nesting in three dimensions universally flows into perfect nesting in two dimensions. As a result, the charge density wave transition temperature is dramatically enhanced to a value of 350 K compared to the 105 K in bulk VSe2. More interestingly, ARPES and scanning tunneling microscopy measurements confirm an unexpected metal-insulator transition at 135 K, driven by lattice distortions. The heterointerface plays an important role in driving this novel metal-insulator transition in the family of monolayered transition metal dichalcogenides., Comment: 21 pages, 4 figures

Emergent phenomena driven by electronic reconstructions in oxide heterostructures have been intensively discussed. However, the role of these phenomena in shaping the electronic properties in van der Waals heterointerfaces has hitherto not been established. By reducing the material thickness and forming a heterointerface, we find two types of charge-ordering transitions in monolayer VSe

Hexagonal boron nitride (hBN) is an essential component in van der Waals heterostructures as it provides high quality and weakly interacting interfaces that preserve the electronic properties of adjacent materials. While exfoliated flakes of hBN have been extensively studied using electron transport and optical probes, detailed experimental measurements of the energy- and momentum- dependent electronic excitation spectrum are lacking. Here, we directly determine the full valence band (VB) electronic structure of micron-sized exfoliated flakes of hBN using angle-resolved photoemission spectroscopy with micrometer spatial resolution. We identify the {\pi}- and {\sigma}-band dispersions, the hBN stacking order and determine a total VB bandwidth of 19.4 eV. We compare these results with electronic structure data for epitaxial hBN on graphene on silicon carbide grown in situ using a borazine precursor. The epitaxial growth and electronic properties are investigated using photoe- mission electron microscopy. Our measurements show that the fundamental electronic properties of hBN are highly dependent on the fabrication strategy., Comment: 10 pages, 8 figures

The semiconducting single-layer transition metal dichalcogenides have been identified as ideal materials for accessing and manipulating spin- and valley-quantum numbers due to a set of favorable optical selection rules in these materials. Here, we apply time- and angle-resolved photoemission spectroscopy to directly probe optically excited free carriers in the electronic band structure of a high quality single layer of WS$_2$. We observe that the optically generated free hole density in a single valley can be increased by a factor of 2 using a circularly polarized optical excitation. Moreover, we find that by varying the photon energy of the excitation we can tune the free carrier density in a given spin-split state around the valence band maximum of the material. The control of the photon energy and polarization of the excitation thus permits us to selectively excite free electron-hole pairs with a given spin and within a single valley., Comment: 5 pages, 4 figures

Direct experimental investigations of the low-energy electronic structure of the ${\mathrm{Na}}_{2}{\mathrm{IrO}}_{3}$ iridate insulator are sparse and draw two conflicting pictures. One relies on flat bands and a clear gap, the other involves dispersive states approaching the Fermi level, pointing to surface metallicity. Here, by a combination of angle-resolved photoemission, photoemission electron microscopy, and x-ray absorption, we show that the correct picture is more complex and involves an anomalous band, arising from charge transfer from Na atoms to Ir-derived states. Bulk quasiparticles do exist, but in one of the two possible surface terminations the charge transfer is smaller and they remain elusive.

All rights reserved. The production of high-quality graphene-oxide interfaces is normally achieved by graphene growth via chemical vapour deposition on a metallic surface, followed by transfer of the C layer onto the oxide, by atomic layer and physical vapour deposition of the oxide on graphene or by carbon deposition on top of oxide surfaces. These methods, however, come with a series of issues: they are complex, costly and can easily result in damage to the carbon network, with detrimental effects on the carrier mobility. Here we show that the growth of a graphene layer on a bimetallic Ni3Al alloy and its subsequent exposure to oxygen at 520 K result in the formation of a 1.5 nm thick alumina nanosheet underneath graphene. This new, simple and low-cost strategy based on the use of alloys opens a promising route to the direct synthesis of a wide range of interfaces formed by graphene and high-κ dielectrics., The research activities of L.O., E.M., F.O. and A.B. have received funding from the MIUR within the programme PRIN 2010-2011 for the project entitled ‘GRAF. Frontiers in Graphene Research: understanding and controlling Advanced Functionalities’ (No.20105ZZTSE_001). E.R.H. acknowledges support of the Spanish Research and Innovation Office through project FIS2012-31713. E.R.H. and D.A. acknowledge support from the Leverhulme Trust. M.B., S.U. and P.H. acknowledge support from the VILLUM foundation, The Danish Council for Independent Research/Technology and Production Sciences.

There is a substantial interest in the heterostructures of semiconducting transition metal dichalcogenides (TMDCs) among each other or with arbitrary materials, through which the control of the chemical, structural, electronic, spintronic, and optical properties can lead to a change in device paradigms. A critical need is to understand the interface between TMDCs and insulating substrates, for example, high-κ dielectrics, which can strongly impact the electronic properties such as the optical gap. Here, we show that the chemical and electronic properties of the single-layer (SL) TMDC, WS

The discovery of new families of exfoliatable 2D crystals that have diverse sets of electronic, optical, and spin-orbit coupling properties enables the realization of unique physical phenomena in these few-atom-thick building blocks and in proximity to other materials. Herein, using NaSn