Search

A thermal sensor was used to better understand parameters which influenced the interaction between a laser beam and a 0.5% Mn-doped ZnAl 2.2 O 4 material, especially the laser defocusing parameter. The optical properties of the material depend on whether the Mn 2+ ions occupy octahedral and/or tetrahedral sites depending on thermal history. A screen printing process is performed to obtain material thin films. Laser irradiation of the films was carried out (patterning 1 cm length single laser track) with different z defocusing heights. Luminescence properties around laser tracks led to the thermal history determination at the micrometer scale. It was shown that spatial thermal gradients defined at the micrometer scale perpendicularly to the borders of the laser tracks could be semiquantified for different z conditions. Laser defocusing leads to decrease thermal gradients as confirmed by thermal modeling studies., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

Objectives: To evaluate the accuracy of two different surgical guides (small extent = single implant and large extent = full arch) fabricated by five additive manufacturing technologies (SLA=Stereolithography, DLP= Digital Light Processing, FDM=Fused Deposition Modeling, SLS=Selective Laser Sintering, Inkjet)., Methods: Overall, 72 guides (6 per type) were obtained with the different machines (SLA=Form2; DLP=Rapid Shape D40 and Cara Print 4.0; FDM=Raise 3D Pro2; SLS=Prodways P1000; Polyjet®=Stratasys J750). The guides were surface-scanned with an optical dental scanner, and the resulting files were compared with the initial design files using a surface matching software. Root Mean Square (RMS) and standard deviation were calculated, representing respectively trueness and precision. Kruskall-Wallis non-parametric test was used to compare trueness and precision between small-extent and large-extent guides and 3D printer by pairs. The threshold for significance was α=0.05, except for the comparison of printers by pairs where a Bonferroni-corrected level of 0.0033 was used., Results: Significant differences were observed for trueness and precision between small-extent and large-extent guides, regardless the printer except for DLP (trueness and precision) and SLS (precision). SLA, DLP and Polyjet® technologies showed similar results in terms of trueness and precision for both small-extend and large-extend guides (P>0.05)., Conclusions: The size affected the accuracy of CAD-CAM surgical guides. The different additive manufacturing technologies had a limited impact on the accuracy., Clinical Significance: This study is of clinical interest as it shows that the 3D printing technology (SLA/DLP) has a limited impact on 3D printed surgical guides accuracy. However, the size of the guide can have a significant impact, as small-extent guides were more accurate than large-extent guides., (Copyright © 2021 Elsevier Ltd. All rights reserved.)