Search

The aim of this study was to evaluate the effect of a time-dependent magnetic field on the biological performance of periodontal ligament stem cells (PDLSCs). A Western blot analysis and Alamar Blue assay were performed to investigate the proliferative capacity of magnetically stimulated PDLSCs (PDLSCs MAG) through the study of the MAPK cascade (p-ERK1/2). The observation of ALP levels allowed the evaluation of the effect of the magnetic field on osteogenic differentiation. Metabolomics data, such as oxygen consumption rate (OCR), extracellular acidification rate (ECAR) and ATP production provided an overview of the PDLSCs MAG metabolic state. Moreover, the mitochondrial state was investigated through confocal laser scanning microscopy. Results showed a good viability for PDLSCs MAG. Magnetic stimulation can activate the ERK phosphorylation more than the FGF factor alone by promoting a better cell proliferation. Osteogenic differentiation was more effectively induced by magnetic stimulation. The metabolic panel indicated significant changes in the mitochondrial cellular respiration of PDLSCs MAG. The results suggested that periodontal ligament stem cells (PDLSCs) can respond to biophysical stimuli such as a time-dependent magnetic field, which is able to induce changes in cell proliferation and differentiation. Moreover, the magnetic stimulation also produced an effect on the cell metabolic profile. Therefore, the current study demonstrated that a time-dependent magnetic stimulation may improve the regenerative properties of PDLSCs.

This chapter would represent a guide for the reader in the path that goes toward more recent and innovative approaches in bone tissue regeneration. Starting from an introduction on tissue engineering approaches and an overview on the scaffold fabrication methods and materials, the chapter will first provide concepts related to surface presentation and modification routes, finally approaching to the fascinating field of bioactive magnetic scaffolds. In this context, the basic principles of magnetism and magnetic materials will be reported, starting from a brief hint to current medical applications of magnetism, such as drug and gene delivery, hyperthermia treatment of tumors and radionuclide therapy, magneto-mechanical stimulation or activation of cell-constructs and mechanosensitive ion channels, magnetic cell-seeding procedures, and controlled cell proliferation and differentiation. The potential to design multifunctional and bioactive 3D structures for in situ and on-demand release of drugs and/or growth factors, as well as for advanced fixation systems, will be highlighted.

Tissue engineering or tissue reconstruction/repair/regeneration may be considered as a guiding strategy in oral and maxillofacial surgery, as well as in endodontics, orthodontics, periodontics, and daily clinical practice. A wide range of techniques has been developed over the past years, from tissue grafts to the more recent and innovative regenerative procedures. Continuous research in the field of natural and artificial materials and biomaterials, as well as in advanced scaffold design strategies has been carried out. The focus has also been on various growth factors involved in dental tissue repair or reconstruction. Benefiting from the recent literature, this review paper illustrates current innovative strategies and technological approaches in oral and maxillofacial tissue engineering, trying to offer some information regarding the available scientific data and practical applications. After introducing tissue engineering aspects, an overview on additive manufacturing technologies will be provided, with a focus on the applications of superparamagnetic iron oxide nanoparticles in the biomedical field. The potential applications of magnetic fields and magnetic devices on the acceleration of orthodontic tooth movement will be analysed.

A wide range of materials has been considered to repair cranial defects. In the field of cranioplasty, poly(methyl methacrylate) (PMMA)-based bone cements and modifications through the inclusion of copper doped tricalcium phosphate (Cu-TCP) particles have been already investigated. On the other hand, aliphatic polyesters such as poly(&epsilon, caprolactone) (PCL) and polylactic acid (PLA) have been frequently investigated to make scaffolds for cranial bone regeneration. Accordingly, the aim of the current research was to design and fabricate customized hybrid devices for the repair of large cranial defects integrating the reverse engineering approach with additive manufacturing, The hybrid device consisted of a 3D additive manufactured polyester porous structures infiltrated with PMMA/Cu-TCP (97.5/2.5 w/w) bone cement. Temperature profiles were first evaluated for 3D hybrid devices (PCL/PMMA, PLA/PMMA, PCL/PMMA/Cu-TCP and PLA/PMMA/Cu-TCP). Peak temperatures recorded for hybrid PCL/PMMA and PCL/PMMA/Cu-TCP were significantly lower than those found for the PLA-based ones. Virtual and physical models of customized devices for large cranial defect were developed to assess the feasibility of the proposed technical solutions. A theoretical analysis was preliminarily performed on the entire head model trying to simulate severe impact conditions for people with the customized hybrid device (PCL/PMMA/Cu-TCP) (i.e., a rigid sphere impacting the implant region of the head). Results from finite element analysis (FEA) provided information on the different components of the model.

Light-activated resins and composites are used in conjunction with a light curing unit and allow an on-demand process of polymerization. These kinds of materials usually represent the most popular choice in the restorative dental practice. Some works have already highlighted contemporary tendencies in the use of nondegradable scaffolds and mesenchymal stem cells in regenerative medicine. Accordingly, the aim of the current research is to develop 3D porous and light-activated composite structures with optimized functional properties. Preliminary mechanical and biological tests are carried out.

Additive manufacturing technologies allow for the direct fabrication of 3D scaffolds with improved properties for tissue regeneration. In this scenario, design strategies and 3D fiber deposition technique are considered to develop advanced scaffolds with different lay-down patterns, tailored mechanical and biological properties. 3D poly(?-caprolactone) scaffolds are manufactured and surface-modified (i.e., aminolysis). The effect of surface modification on the mechanical and biological performances of the designed 3D scaffolds is assessed.

Cranioplasty represents the surgical repair of bone defects or deformities in the cranium arising from traumatic skull bone fracture, cranial bone deformities, bone cancer, and infections. The actual gold standard in surgery procedures for cranioplasty involves the use of biocompatible materials, and repair or regeneration of large cranial defects is particularly challenging from both a functional and aesthetic point of view. PMMA-based bone cement are the most widely biomaterials adopted in the field, with at least four different surgical approaches. Modifications for improving biological and mechanical functions of PMMA-based bone cement have been suggested. To this aim, the inclusion of antibiotics to prevent infection has been shown to provide a reduction of mechanical properties in bending. Therefore, the development of novel antibacterial active agents to overcome issues related to mechanical properties and bacterial resistance to antibiotics is still encouraged. In this context, mechanical, biological, and antibacterial feature against P. aeruginosa and S. aureus bacterial strains of surgical PMMA cement modified with BG and recently developed Cu-TCP bioactive particles have been highlighted.

Background: Deep dental cavities can be restored through a single step according to the bulk-fill technique. Due to the great amount of resin to be cured, a main concern is the temperature rise occurring in the pulp chamber, potentially higher than that developed through the incremental layering technique. Temperature rise of bulk-fill composites have been evaluated. Methods: Bulk-fill composites, differing in material composition and viscosity, were used. Maximum temperature and temperature rate occurring in the composites were measured. Mesio-occlusal-distal cavities of human premolars were restored through the bulk-fill or the incremental layering techniques, and peak temperature and temperature rate occurring in the dentin, 1 mm below the cavity floor, were evaluated. Results: Temperature peak and temperature rise of flowable composites were significantly higher (p &lt, 0.05) than packable composites. For both the techniques, higher temperature peaks were recorded in the dentin for flowable composites. Peak temperatures higher than 42 &deg, C were recorded for the incremental layering technique considering flowable composites. Conclusions: For all the composites, the light curing modality of 1000 mW/cm2 for 20 s can be considered safe if the bulk-fill technique is performed. Instead, for the incremental layering technique, potentially dangerous temperature peaks have been recorded for flowable composites.

The concept of magnetic guidance is still challenging and has opened a wide range of perspectives in the field of tissue engineering. In this context, magnetic nanocomposites consisting of a poly(&epsilon, caprolactone) (PCL) matrix and iron oxide (Fe3O4) nanoparticles were designed and manufactured for bone tissue engineering. The mechanical properties of PCL/Fe3O4 (80/20 w/w) nanocomposites were first assessed through small punch tests. The inclusion of Fe3O4 nanoparticles improved the punching properties as the values of peak load were higher than those obtained for the neat PCL without significantly affecting the work to failure. The effect of a time-dependent magnetic field on the adhesion, proliferation, and differentiation of human mesenchymal stem cells (hMSCs) was analyzed. The Alamar Blue assay, confocal laser scanning microscopy, and image analysis (i.e., shape factor) provided information on cell adhesion and viability over time, whereas the normalized alkaline phosphatase activity (ALP/DNA) demonstrated that the combination of a time-dependent field with magnetic nanocomposites (PCL/Fe3O4 Mag) influenced cell differentiation. Furthermore, in terms of extracellular signal-regulated kinase (ERK)1/2 phosphorylation, an insight into the role of the magnetic stimulation was reported, also demonstrating a strong effect due the combination of the magnetic field with PCL/Fe3O4 nanocomposites (PCL/Fe3O4 Mag).

It has been widely reported that breast reconstruction improves the quality of life of women who undergo mastectomy for breast cancer. This approach provides many psychological advantages. Today, different techniques are available for the breast oncoplastic surgeon that involve the use of breast implants and autologous tissues, also offering interesting results in terms of aesthetic and patient-reported outcomes. On the other hand, advanced technologies and design strategies (i.e. design for additive manufacturing, reverse engineering) may allow the development of customised porous structures with tailored morphological, mechanical, biological, and mass transport properties. For this reason, the current study deals with the challenges, principles, and methods of developing 3D additive manufactured structures in breast reconstructive surgery. Specifically, the aim was to design 3D additive manufactured poly(ε-caprolactone) scaffolds with different architectures (i.e. lay-down patterns). Preliminary mechanical and biological analyses have shown the effect of the lay-down pattern on the performances of the manufactured structures.

Background: The aim of this study was to investigate cuspal deflection caused by material shrinkage and temperature rise occurring in the pulp chamber during photopolymerization. The aim of this study was also to investigate the effect of flowable and packable bulk-fill composites on cuspal deflection occurring in mesio-occlusal&ndash, distal (MOD) cavities restored through the bulk-fill or through the incremental layering technique. Additionally, mechanical and thermal properties of bulk-fill composites were considered. Methods: Two bulk-fill composites (high-viscosity and low-viscosity), largely differing in material composition, were used. These composites were characterized through linear shrinkage and compressive test. Cuspal deformation during restoration of mesio-occlusal&ndash, distal cavities of human premolars was evaluated using both the bulk-fill and the incremental layering techniques. Temperature rise was measured through thermocouples placed 1 mm below the cavity floor. Results: Shrinkage of the flowable composite was significantly higher (p &lt, 0.05) than that of packable composite, while mechanical properties were significantly lower (p &lt, 0.05). For cusp distance variation, no significant difference was observed in cavities restored through both restorative techniques, while temperature rise values spanned from 8.2 &deg, C to 11.9 &deg, C. Conclusions: No significant difference in cusp deflection between the two composites was observed according to both the restorative techniques. This result can be ascribed to the Young&rsquo, s modulus suggesting that the packable composite is stiffer, while the flowable composite is more compliant, thus balancing the cusp distance variation. The light curing modality of 1000 mW/cm2 for 20 s can be considered thermally safe for the pulp chamber.

A vinyl-terminated Polycaprolactone has been developed for tissue engineering applications using a one-step synthesis and functionalization method based on Ring Opening Polymerization (ROP) of ԑ-caprolactone, with Hydroxyl Ethyl Vinyl Ether (HEVE) acting both as the initiator of ROP and as photo-curable functional group. The proposed method employs a catalyst based on Al, instead of the most popular Tin(II) 2-ethylhexanoate, to reduce the cytotoxicity. Following the synthesis of the vinyl-terminated polycaprolactone, its reaction with Fumaryl Chloride (FuCl) results in a divinyl-fumarate polycaprolactone (VPCLF). The obtained polymers were thoroughly characterized using Fourier Transform Infrared Spectroscopy (FTIR) and gel permeation chromatography (GPC) techniques. The polymer has been successfully employed, in combination with N-vinyl Pyrrolidone (NVP), to fabricate films and computer-designed porous scaffolds by micro-stereolithography (μ-SL) with Gyroid and Diamond architectures. Characterization of the networks indicated the influence of NVP content on the network properties. Human Mesenchymal Stem Cells (hMSCs) adhered and spread onto VPCLF/NVP networks showing good biological properties and no cytotoxic effect.

3D Printing and Additive Manufacturing technologies represent powerful tools for the direct fabrication of lightweight structures with improved and tunable properties. In current research, Fused Deposition Modeling (FDM)/3D fiber deposition technique was considered to design 3D multifunctional scaffolds with complex morphology, tailored biological, mechanical and mass transport properties. Polymeric and nanocomposite materials were used for scaffold design and optimization, with a particular focus on bone tissue engineering. As an example, poly(epsilon-caprolactone) (PCL), and PCL-based nanocomposite scaffolds were fabricated and analyzed. The effects of structural and morphological features (i.e., sequence of stacking, fiber spacing, pore size and geometry) as well as of nanoparticle inclusion on the mechanical performances were reported. Furthermore, the possibility to design 3D customized scaffolds for mandibular defect regeneration (i.e., symphysis and ramus) was also considered.

Over the past years, fundamentals of magnetism opened a wide research area of interest, in the field of tissue engineering and regenerative medicine. The integration of magnetic nanoarchitectures into synthetic/natural scaffold formulations allowed obtaining "on demand" responsive structures able to guide the regeneration process. The aim of this work was the design and characterization of three-dimensional (3D) chitosan-based scaffolds containing dextran-grafted maghemite nanoarchitectures (DM) and functionalized with l-arginine (l-Arg) amino acid as bioactive agent. A homogeneous pore distribution and a high degree of interconnection were obtained for all the structures with DMs, which resulted well distributed inside the polymer matrix. All the results suggest that the simultaneous presence of DMs and l-Arg conferred interesting mechano-structural and bioactive properties toward osteoblast-like and human mesenchymal stem cells, differentially stimulating their proliferation both in the absence and in the presence of a time-dependent magnetic field. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1244-1252, 2019.

Mechanical and architectural features play an important role in designing biomedical devices. The use of materials (i.e., Ti6Al4V) with Young’s modulus higher than those of natural tissues generally cause stress shielding effects, bone atrophy, and implant loosening. However, porous devices may be designed to reduce the implant stiffness and, consequently, to improve its stability by promoting tissue ingrowth. If porosity increases, mass transport properties, which are crucial for cell behavior and tissue ingrowth, increase, whereas mechanical properties decrease. As reported in the literature, it is always possible to tailor mass transport and mechanical properties of additively manufactured structures by varying the architectural features, as well as pore shape and size. Even though many studies have already been made on different porous structures with controlled morphology, the aim of current study was to provide only a further analysis on Ti6Al4V lattice structures manufactured by selective laser melting. Experimental and theoretical analyses also demonstrated the possibility to vary the architectural features, pore size, and geometry, without dramatically altering the mechanical performance of the structure.

The concept of magnetic guidance has opened a wide range of perspectives in the field of tissue regeneration. Accordingly, the aim of the current research is to design magnetic responsive scaffolds for enhanced bone tissue regeneration. Specifically, magnetic nanocomposite scaffolds are additively manufactured using 3D fibre deposition technique. The mechanical and magnetic properties of the fabricated scaffolds are first assessed. The role of magnetic features on the biological performances is properly analyzed.

The aim of the present study is to synthesize CaO•GeO2 glass nanocomposite powders. The samples are prepared at 1450°C, and to investigate the structure of the samples, differential thermal analysis (DTA), X-ray diffraction, and Fourier Transform Infrared (FTIR) spectroscopy are used. The main crystallizing phase is found to be CaGe2O5 crystals. Furthermore, the potential antibacterial properties of the materials towards the Gram-negative bacteria, Escherichia coli, are preliminarily studied.

Additive manufacturing represents a powerful tool for the direct fabrication of lightweight and porous structures with tuneable properties. In this study, a fused deposition modelling/3D fibre deposition technique was considered for designing 3D nanocomposite scaffolds with specific architectures and tailored biological, mechanical, and mass transport properties. 3D poly(caprolactone) (PCL)/hydroxyapatite (HA) nanocomposite scaffolds were designed for bone tissue engineering. An optimisation design strategy for the additive manufacturing processes based on extrusion/injection methods was at first extended to the development of the PCL/HA scaffolds. Further insight into the effect of the process parameters on the mechanical properties and morphological features of the nanocomposite scaffolds was provided. The nanocomposite structures were analysed at different levels, and the possibility of designing 3D customised scaffolds for mandibular defect regeneration (i.e., symphysis and ramus) was also reported.

Patients undergoing mastectomy for breast cancer have nowadays many options for breast reconstruction, that will help in re-establishing patient's self confidence in her own body image. Implant-based reconstruction remains the most common form of post-mastectomy reconstruction, but it could also present some complications, the most common being capsular contracture. Accordingly, a novel breast mound may be perfectly designed using the reverse engineering approach and additive manufacturing methods combined with autologous fat grafting. A 3D hierarchical structure with autologous adipose-derived stem cells may be used as a construct for tissue regeneration. The 3D morphologically controlled scaffold may be placed in the subcutaneous position at the level of the conservative mastectomy side. The scaffold will be colonized with autologous fat tissue in some sessions. The biodegradable customized structure will help to maintain the breast shape and the natural consistency may be obtained with the fat grafting, also considering adequate enhancement techniques (Stromal Vascular Fraction derived growth factors). The principles of regenerative medicine may be combined and integrated with those of reverse engineering (3D image capture, 3D modelling and rapid prototyping) to design custom-made and high functional hierarchical structures with tailored properties and 3D complex geometry. The current study will focus on the basic principles and strategies in designing 3D advanced and complex structures for breast repair and regeneration.

As a means of meeting ever increasing emissions and fuel economy demands car manufacturers are using aggressive engine downsizing. To maintain the power output of the engine turbocharging is typically used. Compared to Mono scroll turbines, with a multi-entry system the individual volute sizing can be better matched to the single mass flow pulse from the engine cylinders. The exhaust pulse energy can be better utilised by the turbocharger turbine improving turbocharger response. Additionally the interaction of the engine exhaust pulses can be better avoided, improving the scavenging of the engine. Besides the thermodynamic advantages, the multi-entry turbine represents a challenge to the structural dynamic design of the turbine. A higher number of turbine wheel resonance points can be expected during operation. In addition, the increased use of exhaust pulse energy leads to a distinct accentuation of the blade vibration excitation. Using validated engine models, the interaction of the multi-entry turbine with the engine has been analyzed and various operating points, which may be critical for the blade vibration excitation, have been classified. These operating points deliver the input variables for unsteady computational flow dynamics (CFD) analyses. From these calculations unsteady blade forces were derived providing the necessary boundary conditions for the structural dynamic analyses by spatially and temporally high-resolved absolute pressures on the turbine surface. Goal of the investigation is to identify critical operating conditions. Important is also to investigate the effect of a scroll connection valve on blade excitation. The investigations utilize validated tools that were introduced and successfully applied to several turbine types in a series of publications over recent years. It can be stated that the engine operating condition and the admission type significantly influence the forced response reaction of the blade to the different excitation orders (EO). In case of equal admission even (or multiples of two) EOs generate the largest dynamic blade stress as can be expected due to the two turbine inlet segments. This reaction also increases with the engine speed. In the case of unequal admission, the odd EOs produce the largest forced response reaction. The maximum dynamic blade stress occurs in the region where the scroll connection is just closed. Above all, the scroll connection valve influences the Beta value and thus the basic behavior — unequal or equal admission. It has been possible to reconstruct the forced response behavior of the turbine blade within an engine combustion cycle. For the first time it could be shown for a double scroll application that there is a significant dynamic blade stress change dependent on the engine crankshaft angle. Certainly, due to the inertia of the mass and damping (mass, structure, flow), the blade will not exactly follow the predicted course. However, it is clear that the transient processes within an engine combustion cycle will affect the dynamic blade stress. This applies to the turbine wheels investigated in the work at hand with low damping, high eigenfrequencies and the considered internal combustion engines — as they are typically used in the passenger car sector.

Over the last three decades, it has been frequently reported that the properties of dental restorative composites cured with argon laser are similar or superior to those achieved with conventional halogen and light emitting diode (LED) curing units. Whereas laser curing is not dependent on the distance between the curing unit and the material, such distance represents a drawback for conventional curing units. However, a widespread clinical application of this kind of laser remains difficult due to cost, heavy weight, and bulky size. Recently, with regard to the radiation in the blue region of the spectrum, powerful solid-state lasers have been commercialized. In the current research, CAD (computer-aided design)/CAM (computer-aided manufacturing) assisted solid-state lasers were employed for curing of different dental restorative composites consisting of micro- and nanoparticle-reinforced materials based on acrylic resins. Commercial LED curing units were used as a control. Temperature rise during the photopolymerisation process and bending properties were measured. By providing similar light energy dose, no significant difference in temperature rise was observed when the two light sources provided similar intensity. In addition, after 7 days since curing, bending properties of composites cured with laser and LED were similar. The results suggested that this kind of laser would be suitable for curing dental composites, and the curing process does not suffer from the tip-to-tooth distance.

The aim of the study was to evaluate the spectrum of upper limb functional activities and imaging finding in a cohort of patients affected by Duchenne muscular dystrophy. Thirty-one patients of age between 5 and 29 years were included in the study (17 ambulant and 14 non-ambulant). They were all assessed using the Performance of Upper Limb (PUL) test and muscle MRI of shoulder, arm and forearm in order to establish if the functional scores obtained at shoulder, mid and distal level related to specific patterns of involvement in each upper limb segment on muscle MRI. At shoulder level, latissimus dorsi, serratus anterior, infraspinatus and subscapularis were always involved, even in patients with full functional scores at shoulder level. Diffuse and severe involvement of all muscles was found in the patients with a PUL shoulder functional score of ≤ 5. At arm level biceps brachii, brachialis and triceps were generally concordantly involved or spared. Some degree of involvement could already be detected in patients with reduced scores on the PUL mid domain. They were generally severely involved in patients with functional scores less than 6 at mid-level. At distal level supinator and pronator muscles were often involved, followed by brachioradialis and, less frequently, by the muscles of the flexor compartment. The extensor muscles were generally completely spared. A diffuse and severe involvement was found only in patients who had very low scores (8 or below) on the PUL distal domain. The integrated use of functional scales and imaging allowed to establish patterns of involvement at each level, and the functional scores that were more frequently associated with diffuse and severe involvement.

Experimental/theoretical analyses have already been performed on poly(ε-caprolactone) (PCL) loaded with organic-inorganic fillers (PCL/TiO2 and PCL/ZrO2) to find a correlation between the results from the small punch test and Young's modulus of the materials. PCL loaded with Ti2 (PCL = 12, TiO2 = 88 wt %) and Zr2 (PCL = 12, ZrO2 = 88 wt %) hybrid fillers showed better performances than those obtained for the other particle composition. In this context, the aim of current research is to provide further insight into the mechanical properties of PCL loaded with sol-gel-synthesized organic-inorganic hybrid fillers for bone tissue engineering. For this reason, theoretical analyses were performed by the finite element method. The results from the small punch test and Young's modulus of the materials were newly correlated. The obtained values of Young's modulus (193 MPa for PCL, 378 MPa for PCL/Ti2 and 415 MPa for PCL/Zr2) were higher than those obtained from a previous theoretical modelling (144 MPa for PCL, 282 MPa for PCL/Ti2 and 310 MPa for PCL/Zr2). This correlation will be an important step for the evaluation of Young's modulus, starting from the small punch test data. Experimental/theoretical analyses have already been performed on poly(ε-caprolactone) (PCL) loaded with organic-inorganic fillers (PCL/TiO2and PCL/ZrO2) to find a correlation between the results from the small punch test and Young's modulus of the materials. PCL loaded with Ti2 (PCL = 12, TiO2= 88 wt %) and Zr2 (PCL = 12, ZrO2= 88 wt %) hybrid fillers showed better performances than those obtained for the other particle composition. In this context, the aim of current research is to provide further insight into the mechanical properties of PCL loaded with sol-gel-synthesized organic-inorganic hybrid fillers for bone tissue engineering. For this reason, theoretical analyses were performed by the finite element method. The results from the small punch test and Young's modulus of the materials were newly correlated. The obtained values of Young's modulus (193 MPa for PCL, 378 MPa for PCL/Ti2 and 415 MPa for PCL/Zr2) were higher than those obtained from a previous theoretical modelling (144 MPa for PCL, 282 MPa for PCL/Ti2 and 310 MPa for PCL/Zr2). This correlation will be an important step for the evaluation of Young's modulus, starting from the small punch test data.

Meniscectomy significantly change the kinematics of the knee joint by reducing the contact area between femoral condyles and the tibial plateau, but the shift in the contact area has been poorly described. The aim of our investigation was to measure the shift of the tibiofemoral contact area occurring after meniscectomy. We used laser scans combined to surface texturing for measuring the 3D position and area of the femoral and tibial surfaces involved in the joint. In particular, natural condyles (porcine model) were analysed and the reverse engineering approach was used for the interpretation of the results from compression tests and local force measurements in conjunction with staining techniques. The results suggested that laser scans combined to surface texturing may be considered as a powerful tool to investigate the stained contours of the contact area. Beside the largely documented reduction of contact area and local pressure increase, a shift of the centroid of the contact area toward the intercondylar notch was measured after meniscectomy. As a consequence of the contact area shift and pressure increase, cartilage degeneration close to the intercondylar notch may occur. Meniscectomy significantly change the kinematics of the knee joint by reducing the contact area between femoral condyles and the tibial plateau, but the shift in the contact area has been poorly described. The aim of our investigation was to measure the shift of the tibiofemoral contact area occurring after meniscectomy.We used laser scans combined to surface texturing for measuring the 3D position and area of the femoral and tibial surfaces involved in the joint. In particular, natural condyles (porcine model) were analysed and the reverse engineering approach was used for the interpretation of the results from compression tests and local force measurements in conjunction with staining techniques.The results suggested that laser scans combined to surface texturing may be considered as a powerful tool to investigate the stained contours of the contact area. Beside the largely documented reduction of contact area and local pressure increase, a shift of the centroid of the contact area toward the intercondylar notch was measured after meniscectomy.As a consequence of the contact area shift and pressure increase, cartilage degeneration close to the intercondylar notch may occur.

Material structure-property relationship is strongly related to the employed process technology. Over the past years, laser processing of engineering materials has been proposed in many fields and different uses for diode lasers have been found in dentistry. In this contest, the potential of GaN- and InGaN-based laser diodes to cure dental materials was analysed. Two wavelengths of 405 nm and 445 nm were used as heat or light sources for warm condensation of gutta-percha, light transmission in dental posts and brackets or light curing of dental composites. Additive manufacturing approach was considered to fabricate 3D root analogues, suitable supports, positioning systems and moulds for optical measurements. A three-axis CAD/CAM system was implemented for positioning and aligning the laser beam. The ability of diode-pumped solid-state lasers to cure dental materials or to transmit light was compared to that of a traditional instrument. Temperature profile at the apex of an additive manufactured root canal sealed with gutta-percha, light transmission through translucent quartz fiber post or through aesthetic ceramic bracket, bending properties and morphological features of light cured dental composites (Gradia Direct - GC Corporation and Venus Diamond - Heraeus Kulzer) were measured. Results showed a very high potential of diode-pumped solid-state lasers to be used in endodontics, orthodontics and restorative dentistry.