Search

Epoxy resin is widely used in electrical equipment and electronic devices fields due to its excellent electrical, thermal, and mechanical properties. However, its internal three-dimensional covalent interconnection structure brings barriers to its degradability and recycling because covalent bonds cannot be broken easily. With the replacements of power equipment and electronic devices, there will be more and more epoxy resins and their composites in them to be treated and effective recycling is of great significance for resource conservation and environmental protection. In this review article, recent progress in degradation and recycling of epoxy resin is introduced and the effect of three traditional degradation methods is discussed. The drawbacks of these methods are thought to come from the intrinsic properties of these epoxy resins. So the urgency of developing new kinds of degradable epoxy resins is proposed. Then different types of new degradable epoxy resins are reviewed. Degradation mechanisms of the opened-loop recycling and recycling methods of the closed-loop recycling are summarized in detail. Finally, the challenges and perspectives are discussed based on their current developments. This review comprehensively considers both traditional degradation methods and new methods for developing degradable epoxy resins. It covers not only an overview of the state-of-the-art advances of degradation and recycling of epoxy resin but also the prospects that provide reference for the synthesis of degradable epoxy resin materials.

This article introduces an eco-friendly method for the reclamation of carbon fiber-reinforced polymers (CFRP). The research project involved numerous experiments using microwave-assisted pyrolysis (MAP) to explore a range of factors, such as the inert gas flow, the power level, the On/Off frequency of rotation, and the reaction duration. To design the experiments, the three-level Box–Behnken optimization tool was employed. To determine the individual and combined effects of the input parameters on the thermal decomposition of the resin, the data were analyzed using least-squares variance adjustment. The results demonstrate that the models developed in this study were successful in predicting the direct parameters of influence in the microwave-assisted decomposition of CFRPs. An optimal set of operating conditions was found to be the maximum nitrogen flow (2.9 L/min) and the maximum operating experimental power (914 W). In addition, it was observed that the reactor vessel's On/Off rotation frequency and that increasing the reaction time beyond 6 min had no significant influence on the resin elimination percentage when compared to the two other parameters, i.e., power and carrier gas flow rate. Consequently, the above-mentioned conditions resulted in a maximum resin elimination percentage of 79.6%. Following successful MAP, various post-pyrolysis treatments were employed. These included mechanical abrasion using quartz sand, chemical dissolution, thermal oxidative treatment using a microwave (MW) applicator and thermal oxidative treatment in a conventional furnace. Among these post-treatment techniques, thermal oxidation and chemical dissolution were found to be the most efficient methods, eliminating 100% of the carbon black content on the surface of the recovered carbon fibers. Finally, SEM evaluations and XPS analysis were conducted to compare the surface morphology and elementary constitution of the recovered carbon fibers with virgin carbon fibers. [ABSTRACT FROM AUTHOR]

The research aimed to identify the obstacles to the application of agricultural waste recycling methods from the point of view of farmers in Dakahlia Governorate through: Identifying the sources of information from which the respondents derive their information on agricultural waste recycling methods, identifying the practices of the surveyed farmers (traditional and non-traditional) for recycling agricultural waste, identifying the services provided by agricultural extension in the field, and identifying I have obstacles to the application of methods of recycling agricultural waste from the point of view of the surveyed farmers, and this research has been conducted in Dakahlia Governorate as one of the main governorates in the cultivation of field crops, and the three largest districts in the governorate were selected in terms of cultivated area of rice, corn, and cotton crops, and they are the districts of Mansoura, Aja, Belqas and in the same way the two largest villages belonging to the studied districts were chosen, namely (Mit Al-Amel, Nous). A Gheit (Mansoura districts), Mit Mahmoud, Badin (Aja districts), Al-Ma'sara First, Al-Ma'sara Second Belqas districts) The total number of farmers in the selected villages was 15,207 farmers representing the comprehensive research, and the equation of Craigsy and Morgan was used to determine the sample size, and the sample items were selected in a regular random manner, reaching 375 respondents representing 2.4% of the comprehensive research, and field data were collected using the A statement OF the personal interview, and the arithmetic mean, weighted average, tabular presentation in frequencies, and percentage were used in data analysis. And draw the results of the research. The most important results were: Organizational and administrative obstacles ranked first with a weighted average of 2.57%, followed by financial obstacles in second place with a weighted average of 2.5%, and obstacles related to recycling plant waste ranked third with a weighted average of 2.03%. As for information sources, the results showed the respondents relied mainly on (large farmers) to obtain their information regarding agricultural waste recycling methods, as it came in first place with a weighted average value of 2.48%, followed by personal experience in second place with a weighted average value of 2.27. The results also indicated that 50% of the respondents use traditional practices to dispose of agricultural waste by chopping, and 81.3% of them benefit from it by directly feeding animals such as wheat straw. The results also indicated that awareness of the importance of recycling agricultural waste was one of the most important services provided by the extension agency in the field of waste recycling. With a weighted average of 1.20%, followed by implementing demonstration piles to rotate the rows for farmers to follow, with a weighted average of 1.05%. [ABSTRACT FROM AUTHOR]

The implementation of the green energy transition by reducing reliance on fossil fuels has fueled the burgeoning demand for lithium‐ion batteries in grid‐level energy storage systems and electric vehicles. The growth of portable electronic devices has also contributed to this exponential demand, creating both logistical and environmental challenges in the supply of raw materials such as lithium and the management of end‐of‐life batteries. Current recycling methods for spent batteries are both energy‐intensive and inefficient. To address these issues, a green approach using organic acid mixtures has been proposed to reclaim lithium from spent cathodes and recover and purify graphite from spent anodes, while also regenerating its structure. The effectiveness of this method is demonstrated through the use of organic acid mixtures to leach and reclaim lithium from NCM 622 batteries. On the anode side, a curing–leaching strategy using organic acids is employed to purify spent graphite, which is subsequently calcined to enhance its interlayer structure conducive to better intercalation of Li+ and improve electrochemical performance. Additionally, recovered graphite is tailored with carbon using water bath carbonization to repair structural defects caused by lithium intercalation and improve electrochemical performance while augmenting the regenerated graphite's quality, equipping it to be reused in batteries or upcycled applications. [ABSTRACT FROM AUTHOR]

There has been an enormous information gap on product loss and waste management in the context of sustainable agricultural development. Therefore, this study aimed to explore the feasibility of alternative methods of recycling plant wastes generated in tomato production and to calculate the social cost of using inappropriate agricultural waste management methods in tomato production under greenhouses in Turkey. The research data were collected using questionnaires from 97 greenhouse farms growing tomatoes with soilless agriculture technology in Turkey. The feasibility of switching to the best recycling method was explored using partial budget analysis. According to the research results, on average, the amount of tomato plant waste generated in greenhouse farms was 1753 tons. 71% of vegetable waste was disposed of, while that of reused and recycled was 28% and 1%, respectively. The research also showed that farms that recycled their plant wastes would gain extra return by USD $ 5571 per year if the greenhouse farms switched to farm-level composting. The social cost of disposing of tomato plant wastes was USD $ 356,659 per year and USD $ 593 per hectare in Turkey. The study suggests designing a waste monitoring system via collaboration of state-private sector-NGO-university and putting it into practice to increase waste management efficiency. Checking the prevailing policy and policy instruments and establishing financial and technical infrastructure for recycling waste may be beneficial. [ABSTRACT FROM AUTHOR]

This article introduces an eco-friendly method for the reclamation of carbon fiber-reinforced polymers (CFRP). The research project involved numerous experiments using microwave-assisted pyrolysis (MAP) to explore a range of factors, such as the inert gas flow, the power level, the On/Off frequency of rotation, and the reaction duration. To design the experiments, the three-level Box–Behnken optimization tool was employed. To determine the individual and combined effects of the input parameters on the thermal decomposition of the resin, the data were analyzed using least-squares variance adjustment. The results demonstrate that the models developed in this study were successful in predicting the direct parameters of influence in the microwave-assisted decomposition of CFRPs. An optimal set of operating conditions was found to be the maximum nitrogen flow (2.9 L/min) and the maximum operating experimental power (914 W). In addition, it was observed that the reactor vessel’s On/Off rotation frequency and that increasing the reaction time beyond 6 min had no significant influence on the resin elimination percentage when compared to the two other parameters, i.e., power and carrier gas flow rate. Consequently, the above-mentioned conditions resulted in a maximum resin elimination percentage of 79.6%. Following successful MAP, various post-pyrolysis treatments were employed. These included mechanical abrasion using quartz sand, chemical dissolution, thermal oxidative treatment using a microwave (MW) applicator and thermal oxidative treatment in a conventional furnace. Among these post-treatment techniques, thermal oxidation and chemical dissolution were found to be the most efficient methods, eliminating 100% of the carbon black content on the surface of the recovered carbon fibers. Finally, SEM evaluations and XPS analysis were conducted to compare the surface morphology and elementary constitution of the recovered carbon fibers with virgin carbon fibers.

With the continuous development of industry, it is urgent to treat oily sewage to achieve resource recovery and utilization. For oily sewage, superwetting materials have become one of the most promising materials for treating oily sewage, owing to their high separation efficiency and low energy consumption. Among various treatment methods, the membrane separation method becomes one of the most popular treatment methods in the future because of its low energy consumption and environmental protection. In this work, the basic theory of membrane surface wettability and the preparation method of superhydrophobic surfaces was reviewed, and the research status of the use of superwetting membrane materials for the treatment of various types of oily sewage was further elaborated. At last, the prospects for those future development trends were forecasted.

The extensive use of carbon fiber-reinforced plastics (CFRP) in aerospace, civil engineering, and other fields has resulted in a significant amount of waste, leading to serious environmental issues. Finding appropriate methods for recycling CFRP waste and effectively reusing recycled carbon fibers (rCFs) has become a challenging task. This paper presents an overview of the current status of CFRP waste and provides a systematic review and analysis of recycling technologies. In addition to discussing mechanical recycling, thermal decomposition, and chemical solvent degradation methods, the organic alkali/organic solvent method for recycling resins is also elucidated. By introducing the recycling conditions and outcomes of the organic alkali/organic solvent method, the study highlights its significance as a reference for carbon fiber recycling. Furthermore, the paper reviews the current state of rCFs utilization based on its application domains, focusing on research advancements in fiber composites and cementitious composites. Based on these findings, the paper summarizes the existing research limitations and identifies specific areas that require further attention in recycling techniques and rCFs utilization. Lastly, this review provides a prospect on the future of recycling and reusing CFRP waste. [ABSTRACT FROM AUTHOR]

Plastics are a precious, versatile set of materials. The accumulation of plastic waste threatens the environment. Recycling plastic waste can produce many new products. The many opportunities for using plastic waste create pressure for a strategy to develop or improve current waste management systems to reduce the negative impact on humans, fauna and flora. The objective of this review paper is to consider an opportunity to recycle plastic; to convert plastic waste into plastic sand bricks. This would reduce the impact of the four emerging crises (plastic pollution, unemployment, the shortage of affordable housing and climate change) identified in South Africa as a threat to sustainability. This paper reviews studies utilising plastic waste to manufacture materials for the construction industry. The feasibility of using plastic waste to manufacture bricks revealed high compressive strength, low water absorption and weighed considerably lower compared to traditional bricks. Plastic sand bricks, therefore, can provide a solution that can be used to curb the four emerging crises and contribute to sustainability.

Driven by various environmental and economic factors, it is emerging to adopt an efficient and sustainable strategy to recycle carbon fibers (rCFs) from carbon fiber-reinforced polymer (CFRP) wastes and reuse them in high-value applications. This review summarized the latest progress of CFRP waste recycling methods (including mechanical, chemical, and thermal methods), discussed their advantages and disadvantages, influence parameters and possible environmental effects, and their potential effects on the mechanical and surface chemical properties of rCFs. In addition, the latest optimization schemes of leading recycling technologies were detailed. According to the literature, CFs are the key points in the structural support of semiconductor-based recyclable photocatalytic systems and the enhancement of performance, which means that rCFs have high reuse potential in sustainable photocatalysis. Therefore, this paper also emphasized the possibility and potential value of reusing recovered fibers for developing recyclable photocatalytic products, which may be a new way of reuse in environmental purification often ignored by researchers and decision-makers in the field of CFs. [ABSTRACT FROM AUTHOR]

Plastics are a precious, versatile set of materials. The accumulation of plastic waste threatens the environment. Recycling plastic waste can produce many new products. The many opportunities for using plastic waste create pressure for a strategy to develop or improve current waste management systems to reduce the negative impact on humans, fauna and flora. The objective of this review paper is to consider an opportunity to recycle plastic; to convert plastic waste into plastic sand bricks. This would reduce the impact of the four emerging crises (plastic pollution, unemployment, the shortage of affordable housing and climate change) identified in South Africa as a threat to sustainability. This paper reviews studies utilising plastic waste to manufacture materials for the construction industry. The feasibility of using plastic waste to manufacture bricks revealed high compressive strength, low water absorption and weighed considerably lower compared to traditional bricks. Plastic sand bricks, therefore, can provide a solution that can be used to curb the four emerging crises and contribute to sustainability. [ABSTRACT FROM AUTHOR]

Effective recovery of Li, Co, Ni and Mn from cathode materials of spent lithium-ion batteries (LIBs) has become a global concern. In this study, electrolysis of copper sulfate to produce sulfuric acid and electrons were utilized to recover Li, Co, Ni and Mn from spent LIBs. The obtained results showed that 93 % of Ni, 91 % of Co, 89 % of Mn and 94 % of Li were leached and 99 % of Cu was deposited during leaching process by adopting the 0.225 mol/L of copper sulfate with a solid/liquid ratio of 15 g/L at a current density of 50 mA/m 2 and 80 °C for 4.5 h. Then, a current efficiency of 72 % for the cathode and 30 % for the anode was achieved at a current density of 40 mA/m 2 , 70 °C and pH 2.5 during electrodeposition process. The Ni-Co deposition followed the principle of anomalous codeposition and the complete deposition time of Co, Ni and Mn were 3 h, 9 h and 10 h, respectively. Eventually, the Ni, Co, Mn, Li and Cu can be recovered as Ni-Co alloy, MnO 2 and Li 2 CO 3 and Cu metals with the corresponding recovery rates of 99.40 %, 91.00 %, 90.68 %, 85.59 % and 89.55 %, respectively. This study proposes a promising strategy for recycling cathode materials from spent LIBs without addition of chemical reductants and acids., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Food packaging waste significantly impacts global environmental changes, prompting the adoption of a green circular economy approach. Recycling packaging waste is a critical element of this strategy. However, it faces challenges related to the quality of recycled materials and concerns about their safety. Thus, this review aimed to highlight different analytical methods alone or in combination to evaluate the quality of the recycled material. Furthermore, the safety and health aspects related to the migration of contaminants and their relevant regulations have also been discussed. An important parameter while selecting an appropriate recycling method is the composition and nature of the recyclate, for instance, HDPE (High-Density Polyethylene), PET (Polyethylene Terephthalate), and PP (Polypropylene) materials can be recycled using mechanical and chemical recycling, however, PVC (Polyvinyl Chloride) and PS (Polystyrene) present challenges during mechanical recycling due to lower molecular weight and complex compositions, thus are often downcycled into lower-grade products. Still, recycled papers can be more problematic than recycled plastics due to the nature of the materials and the impact of recycling. The literature review suggested that three quality properties i.e., presence of low molecular weight compounds, degree of degradation, and composition should be analyzed by using different spectroscopic, thermo-mechanical, and chromatographic techniques to obtain a detailed understanding of recycled material quality. Furthermore, recycling should be done in such a way that the migration of contaminants should be lower than the migratory limits set by the relevant authorities to avoid any toxicological effects., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The effective recovery of valuables from anodes coming from spent lithium-ion batteries (LIBs) is of great importance to ensure resource supply and reduce the environmental burden for recycling. In this work, a simple and low energy consumption roasting method was proposed by employing low-temperature eutectic NaOH-KOH as reaction medium, in order to simultaneously separate graphite from Cu foils, extract lithium from it and set it up for reuse as environmental catalyst through one-step water washing process. Our results show that polyvinylidene difluoride (PVDF) was effectively deactivated due to dehydrofluorination/carbonization at a relatively low temperature and short time (150 °C, 20 min) when a mass ratio of 1:1 for eutectic NaOH-KOH to spent LIBs anodes was used, yielding 97.3 % of graphite detached. Moreover, a remarkable lithium extraction efficiency of 93.2 % was simultaneously obtained. Afterwards, the reusability of the recycled graphite was tested by employing it as a catalyst for the treatment of a contaminant organic dye (Rhodamine B) in the presence of NaClO. Our results show that a superior NaClO activation was obtained with the addition of recycled graphite, being this fact closely associated to the abundant active sites formed during the long-term charging/discharging cycles in the original battery. The alkaline-mediated roasting process presented in this work presents an energy-saving scheme to efficiently recover useful components from spent anodes, whereas the reusability example highlighted a useful option for repurposing the severely damaged graphite as an environmental catalyst rather than disposing it in landfills, turning waste into a valuable material., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Food packaging is essential for preserving food safety and quality while also addressing environmental concerns. Designers are at the forefront of developing packaging solutions that not only meet functional requirements but also align with evolving consumer preferences and sustainability concerns. To inform designers, this paper discusses fundamental principles of food packaging technology, encompassing aspects such as food preservation, distribution, marketing, usability, and disposal. It provides examples of innovations in active and smart packaging, nanotechnology, material biodegradability, and recyclability, as well as strategies to reduce packaging waste. By providing future food packaging designers with this essential knowledge and these insights, we hope to encourage them to contribute to future innovations that meet the needs of consumers and the environment., (© 2024 The Author(s). Comprehensive Reviews in Food Science and Food Safety published by Wiley Periodicals LLC on behalf of Institute of Food Technologists.)

The global seaweed industry annually consumes approximately 600,000 tons of dried algal biomass to produce algal hydrocolloids, yet only 15-30% of this biomass is utilized, with the remaining 70-85% discarded or released as scum or wastewater during the hydrocolloid extraction process. This residual biomass is often treated as waste and not considered for further commercial use, which contradicts the principles of sustainable development. In reality, the residual algal biomass could be employed to extract additional biochemical components, such as pigments, proteins, and cellulose, and these ingredients have important application prospects in the food sector. According to the biorefinery concept, recycling various products alongside the principal product enhances overall biomass utilization. Transitioning from traditional single-product processes to multi-product biorefineries, however, raises operating costs, presenting a significant challenge. Alternatively, developing value-added utilization technologies that target seaweed waste without altering existing processes is gaining traction among industry practitioners. Current advancements include methods such as separation and extraction of residual biomass, anaerobic digestion, thermochemical conversion, enzymatic treatment, functionalized modification of algal scum, and efficient utilization through metabolic engineering. These technologies hold promise for converting seaweed waste into alternative proteins, dietary supplements, and bioplastics for food packaging. Combining multiple technologies may offer the most effective strategy for future seaweed waste treatment. Nonetheless, most research on value-added waste utilization remains at the laboratory scale, necessitating further investigation at pilot and commercial scales., (© 2024 Institute of Food Technologists®.)

The intricate encapsulation structure and material composition of photovoltaic modules necessitate full materials recycling involving multiple stages and different technological configurations, thereby increasing environmental burden of recycling process. Consequently, environmental impact assessments are imperative. However, previous studies primarily focused on a single technology or compared different technologies within a specific recycling stage, overlooking various technological configurations and thus engendering incomprehensive assessment. Hence, we employ a comparative life-cycle assessment to evaluate the environmental performance of six recycling alternatives with different technological configurations for silicon photovoltaic waste in China, which encompasses five recycling stages and glass/silicon remanufacturing processes. Results shows thermal delamination reduces the normalized environmental impact by 8.73% and 4.62% compared with mechanical and chemical delamination, respectively; electrolysis for metals extraction carries 35.72%-36.35% higher environmental benefits than precipitation. Additionally, introducing silicon/glass remanufacturing provides an additional 6.27%-11.55% environmental benefits. Therefore, integrating disassembly, thermal delamination, leaching & etching, electrolysis, and remanufacturing exhibits the best environmental performance, with -4796 kg CO 2 -eq/tonne carbon emission and -46400 MJ/tonne energy demand. Environmental hotspots analysis identifies key contributors to environmental impact and benefits. Further sensitivity analysis highlights the importance of enhancing silver and copper recovery efficiency. Finally, targeted strategies are proposed for green recycling routes of photovoltaic waste., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Plastic waste has become a major contributor to global environmental pollution. Some of the environmental impacts of plastic waste include littering, the formation of plastic debris in oceans and the contamination of freshwater and terrestrial habitats. Policymakers face great challenges in mitigating plastic waste. Indonesia is considered the second largest contributor of plastic waste in the world. However, existing policies have not addressed this issue. Policies, such as bans on single-use plastic bags and fees on plastic bags, have recently been implemented in some pilot cities, but the results remain unclear. Thus, this study proposes feasible policies to mitigate plastic waste in Indonesia using system dynamics. Specifically, this study seeks to develop a dynamic model of plastic waste mitigation and to propose a policy scenario for plastic waste mitigation. The proposed policies consist of a plastic bag ban, a plastic bag fee, a recycling centre and extended producer responsibility (EPR). The analysis demonstrates that an effective mixed policy instrument for reducing plastic waste depends on the plastic waste type. Regarding plastic bottles, the effective mixed policy is a combination of a recycling centre and EPR. For plastic bags, the effective mixed policies include the following combinations: a plastic bag fee and plastic bag ban, a plastic bag fee and recycling centre and a plastic bag ban and recycling centre., Competing Interests: Declaration of conflicting interestsThe authors declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Ecosystems and human health are being negatively impacted by the growing problem of electrical waste, especially in developing countries. E-waste poses a significant risk to ecological systems because it can release a variety of hazardous substances into the environment, containing polybrominated diphenyl ethers and heavy metals, brominated flame retardants, polychlorinated dibenzofurans and polycyclic aromatic hydrocarbons, and dioxins. This review article provides a critical assessment of the toxicological consequences of e-waste on ecosystems and human health and data analyses from scientific journals and grey literature on metals, BFRs, PBDEs, PCDFs, and PAHs in several environmental compartments of commercial significance in informal electronic trash recycling. The currently available techniques and tools employed for treating e-waste are sustainable techniques such as bioremediation, chemical leaching, biological leaching, and pyrometallurgy have been also discussed along with the necessity of implementing strong legislation to address the issue of unregulated exports of electronic trash in recycling practices. Despite the ongoing hurdles, implementing environmentally sustainable recycling methods have the potential to address the detrimental impacts of e-waste and foster positive economic development., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The overall objective of this work was to conduct a critical literature review on the application of the circular economy (CE) hierarchy for the management of COVID-19 healthcare waste (HCW). To describe the problem created by COVID-19 HCW, first, the subsystems of the overall management system, including generation, segregation, classification, storage, collection, transport, treatment and disposal, were reviewed and briefly described. Then, the CE hierarchy using the 10R typology was adapted to the management of COVID-19 HCW and included the strategies Refuse, Reduce, Resell/Reuse, Repair, Reprocess, Refurbish, Remanufacture, Repurpose, Recycle and Recover (energy). Disposal was added as a sink of residues from the CE strategies. Using the detailed 10R CE hierarchy for COVID-19 HCW management is the novelty of this review. It was concluded that R-strategy selection depends on its position in the CE hierarchy and medical item criticality and value. Indicative HCW components, which can be managed by each R-strategy, were compiled, but creating value by recovering infectious downgraded materials contaminated with body fluids and tissues is not currently possible. Therefore, after applying the circular solutions, the end of pipe treatment and disposal would be necessary to close material cycles at the end of their life cycles. Addressing the risks, knowledge gaps and policy recommendations of this article may help to combat COVID-19 and future pandemics without creating environmental crises., Competing Interests: Declaration of conflicting interestsThe author declared no potential conflicts of interest with respect to the research, authorship and/or publication of this article.

The textile industry is under pressure to adopt sustainable production methods because its contribution to global warming is expected to rise by 50% by 2030. One solution is to increase the use of recycled raw material. The use of recycled raw material must be considered holistically, including its environmental and economic impacts. This study examined eight scenarios for sustainable denim fabric made from recycled polyethylene terephthalate (PET) fiber, conventional PET fiber, and cotton fiber. The evaluation based on the distance from average solution (EDAS) multicriteria decision-making method was used to rank scenarios according to their environmental and economic impacts, which are assessed using life cycle assessment and life cycle costing. Allocation, a crucial part of evaluating the environmental impact of recycled products, was done using cut-off and waste value. Life cycle assessments reveal that recycled PET fiber has lower freshwater ecotoxicity and fewer eutrophication and acidification impacts. Cotton outperformed PET fibers in human toxicity. Only the cut-off method reduces potential global warming with recycled PET. These findings indicated that recycled raw-material life cycle assessment requires allocation. Life cycle cost analysis revealed that conventional PET is less economically damaging than cotton and recycled PET. The scenarios were ranked by environmental and economic impacts using EDAS. This ranking demonstrated that sustainable denim fabric production must consider both economic and environmental impacts. Integr Environ Assess Manag 2024;20:2347-2365. © 2024 The Author(s). Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC)., (© 2024 The Author(s). Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).)

Electronic waste (e-waste), often dominated by the informal sector, has had adverse effects on recipient developing countries' economies, health and physical environment. Ghana, over the years, has had support from international organisations to manage its e-waste crisis. Until 2016, there was no e-waste specific policy to guide the management of the sector. In 2016, Ghana passed a regulatory policy - Act 917 - to specifically deal with e-waste, supported by other frameworks such as a regulatory instrument (L.I. 2250), a technical guideline for environmentally sound e-waste management and an e-waste-specific policy, which is currently being developed. However, there is dearth of research on how effectively a regulatory policy such as Act 917 can help address an informally dominated sector whose crude recycling approaches have had great environmental and health impacts. Adapting the analytical framework and intervention theory, key stakeholders within the e-waste sector were interviewed on: the effectiveness of the Act, the challenges confronting them and their involvement in the design and implementation processes. The findings showed that stakeholders were represented at various stages of the process. Informal recyclers were provided with training programmes, health centres and an incentive scheme to minimise burning of electrical and electronic equipment. There however exist many challenges to the sound management of the sector, particularly, the lack of end-to-end recycling facilities, registering and formalising the sector and sequencing of the e-waste policy and regulatory framework. The research concludes by recommending areas for future studies., Competing Interests: Declaration of conflicting interestsThe authors declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

In Sri Lanka, the management of Construction & Demolition (C&D) waste poses a major problem, leading to environmental degradation and depletion of resources. This study aims to tackle these issues by examining the implementation of Circular Economy (CE) strategies within the construction industry of Sri Lanka. The focus is on reducing waste generation and maximizing resource utilization during the demolitions and repurpose, as well as material recovery and production stages of the building project life cycle. These stages are crucial in terms of waste generation and resource consumption. A qualitative approach was employed in this research, utilizing the Delphi technique to gather insights through a series of three rounds of expert interviews. In the first round, 17 experts were involved, followed by 15 in the second round, and 12 in the final round. The data collected from these interviews were analysed using manual content analysis methods. Based on the research findings, a total of 14 C&D Waste Management (WM) issues were identified specifically in the Demolitions and Repurpose Stage in Sri Lanka. For each issue, suitable strategies were proposed to overcome them effectively. Furthermore, the study examined the impact of CE strategies on minimizing these issues within the context of the project management iron triangle. Similarly, the Material Recovery and Production Stage of the building presented eight C&D WM issues, each accompanied by corresponding strategies to address them. The research also explored the influence of CE strategies in mitigating these issues, considering the project management iron triangle. During the demolitions and repurpose stage, CE strategies focus on reducing waste generation and optimizing resource utilization. This involves carefully deconstructing buildings to salvage and recover materials that can be reused or repurposed., Competing Interests: Declaration of conflicting interestsThe authors declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Compost reactors, commonly used in experiments, industrial assays, and home residue treatment systems, have the potential to facilitate composting. Challenges persist in the realm of small-scale composting, encompassing facets such as temperature monitoring, homogenization of the compost mass, management of moisture with the control of leachate generation, and integration with a renewable energy source. This study assesses a pioneering composter prototype endowed with essential features to ensure a pragmatic and secure composting process. This includes the facilitation of remote access to temperature data via Bluetooth and a mobile application. Across successive trials, the scrutinized composter prototype consistently yielded reproducible outcomes, exhibiting a coefficient of variation below 25% for the majority of appraised parameters. In comparison to a conventional reactor, the decomposing residue mixture within the examined prototype manifested elevated temperatures (p < 0.05). Moreover, the tested prototype demonstrated C/N ratio lower than 20/1 within 45 days, a higher final nitrogen concentration, and enhanced germination of seeds that served as phytotoxicity bioindicators. Notably, the prototype needed 46.6% less space, offering improved leachate control, three times faster turning time, temperature monitoring, and reduced fly attraction., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

The escalating generation of household medical waste, a byproduct of industrialization and global population growth, has rendered its transportation and logistics management a critical societal concern. This study delves into the optimization of routes for vehicles within the household medical waste logistics network, a response to the imperative of managing this waste effectively. The potential for environmental and public health hazards due to improper waste disposal is acknowledged, prompting the incorporation of contamination risk, influenced by transport duration, waste volume, and wind velocity, into the analysis. To enhance the realism of the simulation, traffic congestion is integrated into the vehicle speed function, reflecting the urban roads' variability. Subsequently, a Bi-objective mixed-integer programming model is formulated to concurrently minimize total operational costs and environmental pollution risks. The complexity inherent in the optimization problem has motivated the development of the Adaptive Hybrid Artificial Fish Swarming Algorithm with Non-Dominated Sorting (AH-NSAFSA). This algorithm employs a sophisticated approach, amalgamating congestion distance and individual ranking to discern optimal solutions from the population. It incorporates a decay function to facilitate an adaptive iterative process, enhancing the algorithm's convergence properties. Furthermore, it leverages the concept of crossover-induced elimination to preserve the genetic diversity and overall robustness of the solution set. The empirical evaluation of AH-NSAFSA is conducted using a test set derived from the Solomon dataset, demonstrating the algorithm's capability to generate feasible non-dominated solutions for household medical waste recycling path planning. Comparative analysis with the Non-dominated Sorted Artificial Fish Swarm Algorithm (NSAFSA) and Non-dominated Sorted Genetic Algorithm II (NSGA-II) across metrics such as MID, SM, NOS, and CT reveals that AH-NSAFSA excels in MID, SM, and NOS, and surpasses NSAFSA in CT, albeit slightly underperforming relative to NSGA-II. The study's holistic approach to waste recycling route planning, which integrates cost-effectiveness with pollution risk and traffic congestion considerations, offers substantial support for enterprises in formulating sustainable green development strategies. AH-NSAFSA offers an eco-efficient, holistic approach to medical waste recycling, advancing sustainable management practices., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Hu et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Fluoride (F) contamination in industrial waste is a significant challenge for sustainable materials recycling. Existing techniques for mitigating F contamination focus on immobilization, converting F compounds to insoluble forms while leaving the total F content untreated. Chelator-assisted washing is considered a promising alternative remediation strategy that can indirectly release F by entrapping and dissolving F-bearing minerals. This study evaluates the effectiveness of chelator-assisted washing in removing F from three real F-contaminated waste samples (TCS-49, TCS-51, and TCS-52) by treating with four different chelators, ethylenediaminetetraacetic acid (EDTA), ethylenediamine N,N'-disuccinic acid (EDDS), diethylenetriaminepentaacetic acid (DTPA), and 3-hydroxy-2,2'-imino disuccinic acid (HIDS). The influence of key washing variables, including chelator type, solution pH, chelator concentration, washing time, and liquid-to-solid (L/S) ratio toward F extraction was assessed and optimized for attaining the maximum extraction. All chelators exhibited the highest F extraction from TCS-49 and TCS-51 at pH 11, whereas in TCS-52 it showed a discrete extraction pattern. Under optimized conditions (concentration, 10 mmol L -1 ; pH, 11; washing duration, 3 h; and L/S ratio, 10:1), EDTA outperformed the other chelators, enhancing F extraction by 2.1 and 1.2 times for TCS-49 and TCS-51, respectively, compared with those of control treatments. However, for TCS-52, the efficiency of EDTA was analogous to that of the control under the same washing conditions. The linear correlation between the extracted F and F-containing minerals suggests that the chelator-induced F removal from contaminated waste involves the entrapment and dissolution of F-bearing minerals, especially Ca and Fe. The subsequent post-washing immobilization of chelator-washed waste residues using CaO or H 3 PO 4 significantly reduced the content of leachable F under the regulatory limit., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The increasing demand for plastic has resulted in a surge in plastic waste production. Polyethylene terephthalate (PET), commonly used in beverage bottle manufacturing, is only partially recycled, with an estimated recycling rate of just 28.4% in 2019. This accumulation of plastic waste is harmful to the environment and living organisms, necessitating effective recycling methods for PET waste. One promising method is alkaline hydrolysis using NaOH, which can break down PET into its monomer components, terephthalic acid (TPA) and ethylene glycol (EG). This process not only recycles PET efficiently but also manages contaminants effectively, producing high-quality TPA, supporting the development of a circular economy. This study looks into PET depolymerization via alkaline hydrolysis at low temperature by investigating effects of various factors: pH levels, water to ethanol ratio, NaOH concentration, NaOH to PET ratio, reaction time, PET size, reusability of unreacted PET, air plasma pretreatment of PET, and different kinds of PET. Promisingly, PET conversion rates of over 90% and a TPA purity of 99.6% were achieved in this study highlighting the efficacy of alkaline hydrolysis in depolymerizing post-consumer PET waste. Ultimately, this research advances sustainable plastic waste management and supports the integration of PET into a circular economy framework., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Legacy waste dumpsites have been a significant environmental concern in India for many years. These dumpsites are characterized by the uncontrolled disposal of Municipal Solid Waste (MSW) and have led to various types of pollution and disease outbreaks. As India faces the challenges of rapid urbanization and increased waste generation and with over 3000 legacy waste dumpsites in the country, the need to address these legacy waste dumpsites has become paramount. As we continue to struggle extensively for waste management as well as space, landfill mining has been recognized as a promising way of recovering resources in our country by employing various technological and engineering advancements to extract valuable materials and energy from legacy waste streams. Unlike existing waste management approaches, this review explores the application of a novel Recovery Potential Index (RPI) for legacy waste dumpsites in India, which evaluates the feasibility of waste treatment facilities based on waste compositions and recovered material quantities. Depending on the RPI, recovered fine fractions can be sold as city compost or used as fill material, while recyclable, combustible, and inert fractions could be directed towards appropriate recycling or landfill uses. Unscientific and uncontrolled landfill mining practices could lead to unanticipated impacts on the nearby environment in the form of heavy contamination, thereby presenting this practice as a challenge in addition to the immense opportunities it provides., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Lithium supply risk is increasing and driving rapid progress in lithium recovery schemes from spent lithium-ion batteries (LIBs). In this study, a facile recycling process consisting mainly of reduction roasting and NaHCO 3 leaching was adopted to improve lithium recovery. The Li of spent LiNi x Co y Mn 1- x - y O 2 powder were converted to Li 2 CO 3 and LiAlO 2 with the reduction effect of C and residual Al in the roasting process. NaHCO 3 leaching was utilized to selectively dissolve lithium from Li 2 CO 3 and water-insoluble LiAlO 2 . The activation energy of NaHCO 3 leaching was 9.31 kJ∙mol -1 and the leaching of lithium was a diffusion control reaction. More than 95.19 % lithium was leached and recovered as a Li 2 CO 3 product with a purity of 99.80 %. Thus, this approach provides a green path to selective recovery of lithium with good economics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

This review emphasizes the urgent need for food waste upcycling as a response to the mounting global food waste crisis. Focusing on polyhydroxyalkanoates (PHAs) as an alternative to traditional plastics, it examines the potential of various food wastes as feedstock for microbial fermentation and PHA production. The upcycling of food waste including cheese whey, waste cooking oil, coffee waste, and animal fat is an innovative practice for food waste management. This approach not only mitigates environmental impacts but also contributes to sustainable development and economic growth. Downstream processing techniques for PHAs are discussed, highlighting their role in obtaining high-quality materials. The study also addresses sustainability considerations, emphasizing biodegradability and recycling, while acknowledging the challenges associated with this path., Competing Interests: Declaration of interests The authors declare no conflicts of interests., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The incineration of municipal solid waste (MSW) produces byproducts known as MSW incineration (MSWI) ash. The reuse of MSWI ash as a construction material prevails in several areas of the world, namely Europe and Asia, however, reuse in the United States (US) lags due to regulatory requirements for disposal practices. Developing a recycling program for MSWI ash provides an alternative end-of-life disposal scenario for material currently landfilled and supplements the reliability of mining of natural aggregates. This study provides a programmatic review of the past decade of challenges and opportunities a local government in the US has experienced to implement a recycling program for their MSWI bottom ash (BA) as a construction aggregate in road materials, such as hot mix asphalt, concrete pavement, and road base. The regulatory and practical challenges in the U.S. are presented, including meeting mechanical and environmental performance requirements (e.g., strength and leaching-to-groundwater). The novel approach to overcoming these challenges include blending MSWIBA from two facilities with common aggregates, creating suitable construction materials. Interfacing with local and state agencies, such as the Department of Environmental Protection and Transportation resulted in additional testing to establish the MSWIBA as a beneficial use material and obtain essential approvals for advancing reuse opportunities. This paper synthesizes available data regarding the challenges, opportunities, and implementation of this recycling program by reviewing the experiences of an MSWI facility in the US to provide fundamental guidance to those considering similar applications. Implications: The reuse of municipal solid waste incinerator bottom ash (MSWIBA) lags in the United States (US) due to regulatory limitations and lack of precedence. This manuscript details the steps of a local government in the US to establishing a novel recycling program for their MSWIBA, including performance evaluation, regulatory interfacing, and outreach. This critical review provides a comprehensive document containing appropriate considerations required to implement similar MSWIBA recycling programs in the US and offers lawmakers, policymakers, and MSWI operators knowledge regarding opportunities and challenges associated with pursuing this avenue.

Whether it be to measure their value before a trade, to calculate yields and optimize the recycling process or to check for the presence of harmful substances, Waste Electronic and Electric Equipments (WEEE) need to be characterized. Sampling can give an accurate assessment of the grade of a batch of WEEE, but quantifying the uncertainty around this estimate can be delicate. Pierre Gy's sampling theory of particulate matter studies how the latter is affected by the physical and chemical properties of the studied objects. However, its application requires a deep understanding of the correlations existing between their size, shape, volume, density, mass and grade, which are still unclear for WEEE fragments. Although average information is typically available on batches of WEEE, a more detailed description would be necessary to gain insight into such relationships. To start filling the gap, this paper focuses on the fine characterization of two different batches of waste printed circuit boards, crushed into pieces of about 10 mm. One by one, over 5,000 fragments were sampled, photographed and analyzed. Their individual mass, density, volume, thickness, surface, width and length were all measured separately. Based on their appearance, they were also sorted into four heuristic categories: plastic, metal, circuit boards and electronic components. Descriptive statistics of this novel granulometric database are shown here, throwing light on the unique correlations between the studied parameters and exhibiting a peculiar mass-size law. They point to new avenues on how to adapt Gy's sampling model to WEEE., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Rapid global urbanization and population growth have ignited an alarming surge in emerging contaminants in water bodies, posing health risks, even at trace concentrations. To address this challenge, novel water treatment and reuse technologies are required as current treatment systems are associated with high costs and energy requirements. These drawbacks provide additional incentives for the application of cost-effective and sustainable biomass-derived activated carbon, which possesses high surface area and low toxicity. Herein, we synthesized microporous activated carbon (MAC) and its magnetic derivative (m-MAC) from tannic acid to decaffeinate contaminated aqueous solutions. Detailed characterization using SEM, BET, and PXRD revealed a very high surface area (>1800 m 2 /g) and a highly porous, amorphous, heterogeneous sponge-like structure. Physicochemical and thermal analyses using XPS, TGA, and EDS confirmed thermal stability, unique surface moieties, and homogeneous elemental distribution. High absorption performance (>96 %) and adsorption capacity (287 and 394 mg/g) were recorded for m-MAC and MAC, respectively. Mechanistic studies showed that the sorption of caffeine is in tandem with multilayer and chemisorptive mechanisms, considering the models' correlation and error coefficients. π-π stacking and hydrogen bonding were among the interactions that could facilitate MAC-Caffeine and m-MAC-Caffeine bonding interactions. Regeneration and reusability experiments revealed adsorption efficiency ranging from 90.5 to 98.4 % for MAC and 88.6-93.7 % for m-MAC for five cycles. Our findings suggest that MAC and its magnetic derivative are effective for caffeine removal, and potentially other organic contaminants with the possibility of developing commercially viable and cost-effective water polishing tools., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Numbers do matter; the Intergovernmental Panel on Climate Change (IPCC)'s 2010 data that the waste sector is responsible for just 3% of global greenhouse gas (GHG) emissions has led to the misperception that solid waste management (SWM) has little to contribute to climate mitigation. Global efforts to control methane emissions and divert organic waste from landfills had already reduced direct emissions. But end-of-pipe SWM has also been evolving into more circular waste and resource management, with indirect GHG savings from the 3Rs (reduce, reuse, recycle) which IPCC accounts for elsewhere in the economy. The evidence compiled here on both direct emissions and indirect savings demonstrates with high confidence that better waste and resource management can make a significant contribution to climate mitigation, and must form a core part of every country's nationally determined contribution. Even the most advanced countries can still achieve much from the 3Rs. In the Global South, the challenge of extending waste collection to all and stopping open dumping and burning (sustainable development goal 11.6.1), essential to improve public health, can be turned into a huge opportunity. Moving early to divert waste from landfill by separation at source and collecting clean organic and dry recycling fractions, will mitigate global GHG emissions, slash ocean plastics and create decent livelihoods. But this can only happen with targeted climate, plastics and extended producer responsibility finance; and help to local communities to help themselves., Competing Interests: Declaration of conflicting interestsThe authors declared no potential conflicts of interest with respect to the research, authorship and/or publication of this article.

This review article provides a comprehensive analysis of the transformative potential of waste plastic in South Africa, with a specific focus on high-density polyethylene-modified bitumen and polyethylene terephthalate plastic fibres asphalt. The review encompasses a wide range of topics, including the environmental and socio-economic impacts of plastic waste, the current state of plastic waste management practices in South Africa, and the potential use of waste plastic in road construction. The aim is to critically evaluate the compatibility of recycled waste plastics as bitumen modifiers and fibre to enhance road performance. Additionally, it explores the challenges and opportunities associated with the incorporation of waste plastic in road construction, shedding light on the environmental, economic and technological aspects. The review also emphasizes the need for targeted interventions and collaborative efforts from the South African government and industry stakeholders to address plastic waste management challenges and promote sustainable infrastructure development. Overall, this review provides valuable insights into the transformative potential of waste plastic in South African road maintenance and offers a roadmap for future research and initiatives in this critical area of sustainable development., Competing Interests: Declaration of conflicting interestsThe authors declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Economic and environmental considerations have elucidated research interests on the best approach to managing electronic waste (e-waste), which has increasing social, environmental, and economic impacts. Proper e-waste managementis essential for resource recovery, environmental sustainability, and public health protection, and effective management of e-waste necessitates analytical techniques to assess and characterize their elemental composition. Despite expansive literature published on the topic of e-waste, there is scarce coverage of the various analytical techniques employed to characterize the inorganic contents of e-waste. This review discusses the various e-waste characterization techniques used in studies published between 2013 and 2023. Specifically, this review covers the analytical approaches employed to characterize the inorganic content of e-waste, the electronic devices or their components analyzed, the elements identified, the sample preparation methods adopted, and the merits and demerits of the analytical procedures. This review highlights the disparate approaches to e-waste characterization and the need for reliable and repeatable e-waste analysis and sample preparation methods., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Published by Elsevier Ltd.)

The recycling of end-of-life wind turbine blades has become a global environmental challenge driven by the rapid growth of wind power. Pyrolysis is a promising method for recovering glass fibers from these discarded blades, but traditional pyrolysis is often operated at high temperatures, which degrades the mechanical properties of recovered fibers. To address this issue, a swelling-assisted pyrolysis method was proposed to recover high-quality glass fibers from end-of-life wind turbine blades at low temperatures. The results confirmed that the decomposition of the resin matrix within the blade was significantly promoted at low temperatures in the swelling-assisted pyrolysis process, achieving a resin decomposition ratio of 76.8 % at 350 °C. This improvement was attributed to enhanced heat transfer and co-pyrolysis with acetic acid. Swelling could physically disrupt the cross-linked structure of the blade, creating a more porous and layered structure, thereby enhancing heat transfer during the pyrolysis process. Simultaneously, the co-pyrolysis with acetic acid could generate hydrogen radicals, which promoted the cracking of macromolecular oligomers into lighter products or gaseous alkanes. Consequently, the formation of pyrolysis char within the solid pyrolysis product was reduced, shortening the oxidation duration to 30 min. In comparison to traditional pyrolysis, the swelling-assisted pyrolysis process effectively suppressed the diffusion of surface defects over the recovered fibers, leading to promising improvements in their flexibility, elasticity, and mechanical properties, with tensile strength notably increased by 27.5 %. These findings provided valuable insights into recovering high-quality glass fibers from end-of-life wind turbine blades., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Phosphate rock is a finite, non-renewable mineral resource that is used primarily in fertiliser production. The scarcity and the increasing demand for this finite material led the European Commission to include it in the critical raw material list in 2014. As a consequence, efforts have been directed towards enhancing material use efficiency, initiating recycling efforts, and formulating waste policies to mitigate the criticality of raw materials. Interest in the development of technologies for nutrient recovery from organic waste streams has increased in recent years, and dairy processing sludge (DPS) is a potential input waste stream. Although the recovery of P from DPS can contribute to more circular flows of nutrients in society, it has to be assessed whether there are also overall environmental gains. This paper reports on a life cycle assessment (LCA) of the environmental impacts of three scenarios for phosphorus (P) recovery involving hydrothermal carbonization (HTC) and struvite precipitation and a comparison to a reference drying scenario. HTC produces a solid fraction (hydrochar), and a liquid fraction (process water) and in one of the scenarios (Scenario 3), leaching the hydrochar for additional P recovery is considered. From the process water as well as from the hydrochar leachate, P is precipitated in the form of struvite. Scenarios 1 and 2 both consider HTC and struvite production with the only difference that the hydrochar is used as a fuel instead of as a fertilizer in the latter case, and Scenario 3 adds leaching of the hydrochar with subsequent struvite production and considers that hydrochar is used as a fuel. In the fourth (reference) scenario, dewatering and drying of DPS is considered. The recovered product use in agriculture was not assessed at this stage. The assessment of the emerging technologies in Scenarios 1-3 was done by studying the technologies in early stages of development but modelling them as more developed in the future. Additional functions beyond the functional unit of one kg of P recovered were handled through a system expansion by substitution approach. This way, the system was credited for calcium ammonium nitrate (CAN) production in all scenarios and for wood chips production in Scenarios 2 and 3. Looking at net outcomes for all scenarios, the life cycle impact indicator results for scenario 2 are lower than the other scenarios in several impact categories. Large gains in scenario 2 are related to the avoided production of wood chips., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

The Pew Charitable Trust's 2020 report 'Breaking the Plastic Wave', indicates that existing technologies could support an 80% reduction in plastic leakage relative to business as usual by 2040. Therefore, South Africa became the first country to work with the Pew Charitable Trust and Oxford University to test and apply 'Pathways', a modelling framework and software tool which stemmed and evolved from the Pew report, at country level. The tool calculates the flows of plastics in the economy and the impact of various strategies to reduce future plastic pollution. The Scenario Builder within the Pathways tool allows the user to optimise flows in the plastics value chain to satisfy a set of defined objectives in order to achieve an optimal solution. Three major findings have emerged from the application of Pathways at country level for South Africa. Firstly, plastic pollution is set to almost double by 2040 if no interventions are implemented. Secondly, meeting the newly legislated extended producer responsibility (EPR) targets set for plastic packaging can avoid 33% of projected total pollution over the period of 2023-2040. Lastly, an optimal system change can avoid 63% of total plastic pollution over the period 2023-2040. Thus, applying Pathways at country level in South Africa has proven to be valuable by setting a baseline against which progress towards reducing plastic pollution can be measured; determining the outcome of meeting the legislated EPR targets over time, and informing policy decisions by allowing users to model different scenarios towards an optimal system change scenario., Competing Interests: Declaration of conflicting interestsThe authors declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

The recycling of spent lithium ion batteries is of great significance because it contains large amounts of valuable metals. But current recovery methods exhibit limited efficiency in selectively extracting lithium from spent electrode materials and spent graphite becomes metallurgical residues. In this study, we propose a novel recycling flowchart that combines flotation with multi-stage water-leaching to enhance the recovery of graphite and lithium from black mass derived from spent lithium ion batteries. Removal of organics can be conducted by pyrolysis, at the same time, the spent ternary cathode material was decomposed into CoO, NiO, and MnO at a temperature of 600 °C for 60 min using pyrolysis product-derived reductant. The sub-microlevel migration behavior of lithium ions in electrode materials was also examined. The electrode material aggregates were broken up by water crushing, and 38.67 % lithium dissolves into water for recycling. Bubble flotation was used to recycle the excess graphite from the black mass while the residual graphite was used as reductant for the carbothermal reduction. Using the developed scheme, we were able to recover 95.51 % of lithium after carbothermal reduction with 12.31 % carbon residue. Based on basic research, a novel recycling flowchart of spent lithium-ion batteries has been proposed., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

A Circular Waste Management alternative is considered in this paper in which a complete ash valorization process is proposed for an Integrated Gasification with Combined Cycle fly ash, trying to extract maximum value from this waste before it is discarded. In the paper, germanium, a scarce resource vital in our modern society, is first extracted from fly ash using water, with an extraction yield of 85%, and subsequently, the leached fly ash is used in the manufacture of fire-resistant boards containing 60% ash, thereby avoiding its disposal in a landfill. The potential environmental impact caused by the two stages of the process was analyzed, and the final effluent was considered to achieve a zero-discharge objective. This paper contributes to the development of a more sustainable management alternative for an industrial waste produced in increased amounts and provides the basis for a symbiotic coupling relationship among various industrial sectors., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Spent lithium battery is a polymetallic waste, and valuable to be recovered as Li-bearing chemical with the barriers of impurities separation, especially Fe and Al. Here in, Li-rich cathode powder was manually disassembled from spent battery, and then recovered as lithiophosphate plate in consideration of effective separation of impure Fe/Al. The powder comprised of 23.2% Fe, 3.2% Al, 5.5% Li and 19.6% P, and then dissolved by azotic acid as Li-rich solution. When the solution was heated to 190°C for 10 h with the supplementary of saccharose, more than 99.9% Fe and 98.9% Al were removed as spherical giniite particles, in accordance with the rest of Fe/Al at the concentrations of 2.1 and 14 mg/L, whilst the loss of Li was less than 1.5%. But without saccharose, the Fe/Al removals only achieved by 99.2% and 52.1%. It is also found that the Fe/Al/Li removal achieved by 99.6%, 96% and 25.3% after adjusting the solution to pH 2.7 by NaOH. After hydrothermal treatment, the rest Li can be recycled as lithiophosphate plate by pH adjustment, in contrast to the recovery efficiency of 98.5% Li. Such method raised a facile route to effectively separate impure Fe/Al from Li-rich cathode powder, and showed promising application in the industrial recovery of spent battery.

Municipal solid waste (MSW) management is a critical concern in megacities that depend heavily on external material and energy inputs but lack space for waste disposal. MSW treatment is a significant contributor to carbon emissions. The implementation of source classification improved the overall MSW management system and enhanced resource recovery from MSW. However, the precise contribution of source classification to carbon emissions reduction remains unclear. This study aimed to analyze the carbon emissions evolution in the MSW management of Shenzhen, a prototypical megacity in China, using data from 2006 to 2020 and employing carbon footprint assessment methodologies. The results demonstrated that source classification reduced the carbon emissions from 0.19-0.25 to 0.14-0.18 t CO 2 -eq/t MSW when considering the contribution of the urban environmental sanitation management department. The entire MSW management system becomes a carbon sink when considering recyclables collected by commercial enterprises. Although the source classification complicated the collection and transportation of MSW, the carbon offset effect of recycling food waste and recyclables was more significant than that of carbon emissions from collection and transport. Moreover, the landfill gas recovery rate critically influenced the carbon emissions of landfill-based MSW management systems. In contrast, the recovery of plastics was crucial for determining carbon emissions from incineration-based MSW management systems., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Huan Li reports financial support was provided by National Key R&D Program of China. Huan Li reports financial support was provided by Shenzhen Science and Technology Innovation Committee., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The active silicon cell of a solar photovoltaic (PV) panel is covered by an ethylenevinylacetate (EVA) adhesive and a protective top glass layer. Separating this glass-EVA layer from the underlying silicon represents a bottleneck for recycling PV panels. Previous work has shown that the EVA-Si bond can be weakened by applying a continuous source of heat to melt the EVA. In this paper, a new method using nanosecond laser pulses is demonstrated to induce transient melting selectively at the EVA-Si interface. This impulsive heating method can cleanly separate the glass-EVA layer from the silicon in both model and commercial multicrystalline PV panels. The dependence of this debonding on parameters like laser pulse fluence (laser pulse energy per area), wavelength, applied pressure, and scan speed were characterized. For model PV panels, the single-pulse laser fluences required for spontaneous separation of the assembly under the force of gravity, were 0.23, 0.32 and 0.78 J/cm 2 for 355 nm, 532 nm and 1064 nm, respectively. The use of shorter wavelengths reduces the laser fluence needed for debonding, while higher fluences can compensate for faster laser beam scanning rates. Optical and electron microscopy images of the Si surfaces before and after laser irradiation show that the textured antireflection layer is destroyed but the silver metal grid remains intact. Preliminary experiments using 532 nm pulses showed that the laser debonding method could remove the glass-EVA layer from sections of decommissioned commercial PV panels, even when the top glass layer was densely cracked., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Christopher J Bardeen reports financial support was provided by Office of Naval Research. Christopher J Bardeen reports a relationship with Office of Naval Research that includes: funding grants. Christopher J Bardeen has patent pending to UC Riverside. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Global waste management challenges demand innovative and multi-functional solutions. The Nordic Biogas Model (NBM) based on anaerobic digestion of organic waste and valorization of its outputs provides several benefits beyond waste treatment such as energy recovery, nutrient recycling and climate impact mitigation. Despite these benefits, its international adoption remains limited, revealing an implementation gap. One way to address this gap is to adapt technology and knowledge from the provider to each specific context. This involves the embedding of the technology into the local context and the development of conditions such as formal and informal institutions over time. Based on decade-long interactions with Nordic companies and municipal decision-makers, we highlight the importance of communication between the technology provider and potential adopter, to ensure that the diverse sustainability benefits of NBM are acknowledged. Furthermore, most provider companies can benefit from a systematic guideline that supports early-stage decision-making as an essential component of the adaptation and implementation of the NBM in diverse international contexts. In this article, we offer suggestions for both: (1) how to better communicate the sustainability benefits of the NBM, and (2) how to assess the risk and opportunities of entering new markets at the early stages of decision-making., Competing Interests: Declaration of conflicting interestsThe authors declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.