Search

Theory and design aspects of the Slotted Waveguide Antenna (SWA) array for the simultaneous generation of Orbital Angular Momentum (OAM) modes are proposed in this paper. The proposed method is a novel approach to OAM generation that uses a simple feeding scheme and has better performance, especially in terms of mode purity. Due to its all-metallic structure, the high-power OAM beams with first-order modes ( + 1 & - 1 ) can be generated simultaneously along the propagation axis but in opposite directions, which improves the coverage and makes the proposed SWA be used in applications like radar target detection by mounting it on a mechanically rotating platform. The proposed theory is verified by the electromagnetic (EM) simulations, followed by the experimental verification done on the laboratory prototype. The near-field characteristics of the proposed antenna confirm the generation of first-order OAM beams with high mode purity. The far-field characteristics show the high gain and quasi-omnidirectional radiation pattern. Transmission of high-power OAM beams with good far-field characteristics makes the proposed antenna mitigate the issues of long-range OAM communication to a certain extent. However, the proposed antenna can be served well in strategic applications where the mostly high-power microwave is involved. [ABSTRACT FROM AUTHOR]

The orthogonal frequency-division multiplexing (OFDM) mode with a linear frequency modulation (LFM) signal as the baseband waveform has been widely studied and applied in multiple-input multiple-output (MIMO) radar systems. However, its high sidelobe levels after pulse compression affect the target detection of radar systems. For this paper, theoretical analysis was performed, to investigate the causes of high sidelobe levels in OFDM-LFM waveforms, and a novel waveform optimization design method based on deep neural networks is proposed. This method utilizes the classic ResNeXt network to construct dual-channel neural networks, and a new loss function is employed to design the phase and bandwidth of the OFDM-LFM waveforms. Meanwhile, the optimization factor is exploited, to address the optimization problem of the peak sidelobe levels (PSLs) and integral sidelobe levels (ISLs). Our numerical results verified the correctness of the theoretical analysis and the effectiveness of the proposed method. The designed OFDM-LFM waveforms exhibited outstanding performance in pulse compression and improved the detection performance of the radar. [ABSTRACT FROM AUTHOR]

Polarimetric high-resolution range profile (HRRP), with its rich polarimetric and spatial information, has become increasingly important in radar automatic target recognition (RATR). This study proposes an interpretable target-aware vision Transformer (ITAViT) for polarimetric HRRP target recognition with a novel attention loss. In ITAViT, we initially fuse the polarimetric features and the amplitude of polarimetric HRRP with a polarimetric preprocessing layer (PPL) to obtain the feature map as the input of the subsequent network. The vision Transformer (ViT) is then used as the backbone to automatically extract both local and global features. Most importantly, we introduce a novel attention loss to optimize the alignment between the attention map and the HRRP span. Thus, it can improve the difference between the target and the background, and enable the model to more effectively focus on real target areas. Experiments on a simulated X-band dataset demonstrate that our proposed ITAViT outperforms comparative models under various experimental conditions. Ablation studies highlight the effectiveness of polarimetric preprocessing and attention loss. Furthermore, the visualization of the self-attention mechanism suggests that attention loss enhances the interpretability of the network. [ABSTRACT FROM AUTHOR]

Corner reflector, as a passive jammer, can generate a large radar cross section (RCS) to interfere with radar for target recognition. However, the impact of corner reflectors on passive millimetre-wave (PMMW) recognition is unclear. In this paper, based on ray tracing, the brightness temperature (TB) of corner reflectors is calculated. Ray tracing paths are used to analyze the impact of the sky, sea surface, and sun on the TB of corner reflectors. The antenna temperature of corner reflectors and their array at different distances is simulated and compared with that of a metal ship to evaluate their jamming performance. Four series of experiments measuring the antenna temperature of corner reflectors and the ship are conducted to verify the jamming performance. The results indicate that the contrast of corner reflectors is much smaller than that of ship target, causing little jamming for PMMW recognition. [ABSTRACT FROM AUTHOR]

As LiDAR technology progressively advances, the capability of radar in detecting targets has become increasingly vital across diverse domains, including industrial, military, and automotive sectors. Frequency-modulated continuous-wave (FMCW) LiDAR in particular has garnered substantial interest due to its efficient direct velocity measurement and excellent anti-interference characteristics. It is widely recognized for its significant potential within radar technology. This study begins by elucidating the operational mechanism of FMCW LiDAR and delves into its basic principles. It discuss, in depth, the influence of various parameters on FMCW LiDAR's performance and reviews the latest progress in the field. This paper proposes that future studies should focus on the synergistic optimization of key parameters to promote the miniaturization, weight reduction, cost-effectiveness, and longevity of FMCW LiDAR systems. This approach aims at the comprehensive development of FMCW LiDAR, striving for significant improvements in system performance. By optimizing these key parameters, the goal is to promote FMCW LiDAR technology, ensuring more reliable and accurate applications in automated driving and environmental sensing. [ABSTRACT FROM AUTHOR]

The high resolution range profile (HRRP) of radar air target often contains a certain amount of clutter noise, and it is necessary to focus on the influence of noise to carry out air target recognition using HRRP. To address the above issues, an air target HRRP recognition method based on deep residual shrinkage network (DRSN) is proposed, which combines deep residual network, soft threshold mg function and attention mechanism, and cross-layer identify connection method is adopted. DRSN can not only avoid the problem of gradient vanishing or gradient exploding caused by too deep layers of the network, which leads to the degradation of the teaming ability of the network, but also can effectively After out the influence of noisy features in the recognition process, so that the model can focus on the recognition of deep features in the target region and improve the recognition ability of the model in the strong noise background. The experimental results show that the proposed method has certain advantages n recognition effort under each signal -to-noise ratio condition compared with other commonly used deep tearing models, and the model has strong robustness to noise. [ABSTRACT FROM AUTHOR]

To solve the problem on low classification accuracy caused by the difficulty of extracting features of micro-motion targets, such as pedestrians, vehicles, and drones in low-altitude radar monitoring scenarios, a multi-channel radar target micro-motion feature classification method based on EfficientNet is proposed. Firstly, a multi-energy singular value decomposition method is proposed to suppress clutter and noise, and enhance the micro-motion characteristics of the target based on the energy distribution differences between the clutter, target, and noise signals. Secondly, the multi-channel EfficientNet model is designed to combine time-frequency information features in radar sum and difference channels, and further fuse multi-channel micro-motion features to achieve accurate target classification. Finally, the effectiveness of the proposed method is visited through experiments using radar measured target data. The results show that compared with other methods, the proposed method significantly improves classification accuracy with low model complexly. [ABSTRACT FROM AUTHOR]

A T/R-R (transmitting receiving-receiving) radar sparse aperture multi-view fusion imaging method based on the complex Bayesian compressed sensing (BCS) algorithm is proposed for the practical imaging of T/R-R configuration radar, taking into account the orbital priors of space targets and the advantages of the dual-rotation inverse synthetic aperture radar (ISAR) imaging system. On the basis of establishing a dual rotation radar fusion imaging modal, the proposed method utilizes Laplace priors to establish a sparse model of the target in the complex domain, improving the sparsity promotion effort of the algorithm and obtaining high-resolution target images. The stimulation experiment resets show that the proposed method can not only achieve multi-view fusion imaging of dual station radar, but also achieve multi-view fusion imaging of dual-station radar with sparse aperture respectively, further expanding the application scenarios and effectively improving azimuth resolution and imaging quality. [ABSTRACT FROM AUTHOR]

To address the technical problems of target detection and identification of missile-borne radar in the background of strong ground clutter, we propose to combine the high resolution range profile (HRRP) technology and Doppler beam sharpening (DBS) technology to carry out two-dimensional high-resolution imaging of the ground to improve the performance of radar target detection and identification in the presence of clutter. The method uses the linear frequency modulation stepped frequency (LFM-SF) signal as the basic waveform. Firstly, the Doppler effect caused by the platform speed is discussed in detail and corrected. Then, HRRP sequences corresponding to each frame are obtained through distance profile extraction, and aiimuth high resolution is achieved using fast Fourier transform (FFT). Finally, motion compensation is applied to the errors caused by the platform in actual light conditions, completing the two-dimensional resolution of the area within the beam. The processing of measured data has verified the effectiveness and practicality of the proposed algorithm. [ABSTRACT FROM AUTHOR]

In this paper, we propose a K‐nearest neighbor manifold filter on the Riemannian manifold and apply it to signal detection within clutter. In particular, the correlation and power of sample data in each cell are modeled as an Hermitian positive definite (HPD) matrix. A K‐nearest neighbor filter that performs the weight average of the set of K‐nearest neighbor HPD matrices of each HPD matrix is proposed to reduce the clutter power. Then, the clutter covariance matrix is estimated as the Riemannian mean of a set of secondary HPD matrices. Signal detection is considered as distinguishing the matrices of clutter and target signal on the Riemannian manifold. Moreover, to speed up the convergence of matrix equation of Riemannian mean, we exploit a strategy to choose the initial input matrix and step size of this equation. Numerical results show that the proposed detector achieves a detection performance improvement over the conventional detector as well as its state‐of‐the‐art counterpart in nonhomogeneous clutter. [ABSTRACT FROM AUTHOR]

In autonomous driving, Frequency-Modulated Continuous-Wave (FMCW) radar has gained widespread acceptance for target detection due to its resilience and dependability under diverse weather and illumination circumstances. Although deep learning radar target identification models have seen fast improvement, there is a lack of research on their susceptibility to adversarial attacks. Various spoofing attack techniques have been suggested to target radar sensors by deliberately sending certain signals through specialized devices. In this paper, we proposed a new adversarial deep learning network for spoofing attacks in radar target detection (RTD). Multi-level adversarial attack prevention using deep learning is designed for the coherence pulse deep feature map from DAALnet and Range-Doppler (RD) map from TDDLnet. After the discrimination of the attack, optimization of hybrid deep learning (OHDL) integrated with enhanced PSO is used to predict the range and velocity of the target. Simulations are performed to evaluate the sensitivity of AOHDL for different radar environment configurations. RMSE of AOHDL is almost the same as OHDL without attack conditions and it outperforms the earlier RTD implementations. [ABSTRACT FROM AUTHOR]

Target localization for distributed radars requires precise knowledge of the calibration errors in time, frequency, and space. Previous studies focus on the sensor location error and sensor directional error in space. This paper concentrates on the system errors in time and frequency which directly affect the targets estimation of range and velocity. Based on linear frequency modulation waveform, the impact of the system errors including sample interval, pulse repetition interval, and centre frequency are analysed. An alternating optimization algorithm is proposed to achieve the target localization, velocity estimation and system errors estimation simultaneously. Simulation shows the effectiveness of the algorithm and the influence on localization due to varying number of targets and radars. [ABSTRACT FROM AUTHOR]

Ubiquitous Radar has become an essential tool for preventing bird strikes at airports, where accurate target classification is of paramount importance. The working mode of Ubiquitous Radar, which operates in track-then-identify (TTI) mode, provides both tracking information and Doppler information for the classification and recognition module. Moreover, the main features of the target's Doppler information are concentrated around the Doppler main spectrum. This study innovatively used tracking information to generate a feature enhancement layer that can indicate the area where the main spectrum is located and combines it with the RGB three-channel Doppler spectrogram to form an RGBA four-channel Doppler spectrogram. Compared with the RGB three-channel Doppler spectrogram, this method increases the classification accuracy for four types of targets (ships, birds, flapping birds, and bird flocks) from 93.13% to 97.13%, an improvement of 4%. On this basis, this study integrated the coordinate attention (CA) module into the building block of the 34-layer residual network (ResNet34), forming ResNet34_CA. This integration enables the network to focus more on the main spectrum information of the target, thereby further improving the classification accuracy from 97.13% to 97.22%. [ABSTRACT FROM AUTHOR]

The measurement of the target azimuth angle using forward-looking radar (FLR) is widely applied in unmanned systems, such as obstacle avoidance and tracking applications. This paper proposes a semi-supervised support vector regression (SVR) method to solve the problem of small sample learning of the target angle with FLR. This method utilizes function approximation to solve the problem of estimating the target angle. First, SVR is used to construct the function mapping relationship between the echo and the target angle in beamspace. Next, by adding manifold constraints to the loss function, supervised learning is extended to semi-supervised learning, aiming to improve the small sample adaptation ability. This framework supports updating the angle estimating function with continuously increasing unlabeled samples during the FLR scanning process. The numerical simulation results show that the new technology has better performance than model-based methods and fully supervised methods, especially under limited conditions such as signal-to-noise ratio and number of training samples. [ABSTRACT FROM AUTHOR]

This paper addresses polarimetric adaptive coherent detection of radar targets embedded in sea clutter. Initially, radar clutter data across multiple polarimetric channels is modeled using a compound Gaussian framework featuring an unspecified speckle covariance matrix and lognormal texture distribution. Subsequently, three adaptive polarimetric coherent detectors are derived, employing parameter estimation and two-step versions of the generalized likelihood ratio test (GLRT): the complex parameter Rao and Wald tests. These detectors utilize both clutter texture distribution information and radar data's polarimetric aspects to enhance detection performance. Simulation experiments demonstrate the superiority of three proposed detectors over the competitors, and that they are sensitive to polarimetric channel parameters such as secondary data quantity, target or clutter speckle correlation, and signal-to-clutter ratio disparity. Additionally, the proposed detectors exhibit a near-constant false alarm rate relative to average clutter power and speckle covariance matrix. [ABSTRACT FROM AUTHOR]

For modern radar systems, small unmanned aerial vehicles (UAVs) belong to a typical types of targets with 'low, slow, and small' characteristics. In complex combat environments, the functional requirements of radar systems are not only limited to achieving stable detection and tracking performance but also to effectively complete the recognition of small UAV targets. In this paper, a multi-dimensional feature fusion framework for small UAV target recognition utilizing a small-sized and low-cost high-resolution radar is proposed, which can fully extract and combine the geometric structure features and the micro-motion features of small UAV targets. For the performance analysis, the echo data of different small UAV targets was measured and collected with a millimeter-wave radar, and the dataset consists of high-resolution range profiles (HRRP) and micro-Doppler time–frequency spectrograms was constructed for training and testing. The effectiveness of the proposed method was demonstrated by a series of comparison experiments, and the overall accuracy of the proposed method can reach 98.5%, which demonstrates that the proposed multi-dimensional feature fusion method can achieve better recognition performance than that of classical algorithms and higher robustness than that of single features for small UAV targets. [ABSTRACT FROM AUTHOR]

Due to suppression jamming by jammers, the signal-to-interference-plus-noise ratio (SINR) during tracking tasks is significantly reduced, thereby decreasing the target detection probability of radar systems. This may result in the interruption of the target track. To address this issue, we propose a multi-static radar power allocation algorithm that enhances the detection and tracking performance of multiple radars in relation to their targets by optimizing power resource allocation. Initially, the echo signal model and measurement model of multi-static radar are formulated, followed by the derivation of the Bayesian Cramér–Rao lower bound (BCRLB). The multi-objective optimization method is utilized to establish the objective function for joint tracking and detection, with dynamic adjustment of the weight coefficient to balance the tracking and detection performance of multiple radars. This ensures the reliability and anti-jamming capability of the multi-static radar system. Simulation results indicate that the proposed algorithm can prevent the interruption of jammer tracking and maintain robust tracking performance. [ABSTRACT FROM AUTHOR]

Purpose: Cochlear implantation is a standard approach to hearing rehabilitation and encompasses three main stages: appropriate patient selection, a challenging surgical procedure, which should be as atraumatic as possible and preserve cochlear structures, and lifelong postoperative follow-up. Computed tomography (CT) is performed to assess postoperative implant position. The Siemens Advanced Radar Target Identification System (ARTIS) Pheno provides fluoroscopic imaging during surgery and has so far been mainly used by cardiologists, neurosurgeons and trauma surgeons. Methods: Six patients with difficult anatomy or a challenging medical history were selected for a surgical procedure, during which we planned to use the ARTIS Pheno to accurately position and assess implant position under fluoroscopy during and immediately after surgery. In all six cases, the ARTIS Pheno was used directly in the surgical setting. The procedures were performed in cooperation with the neuroradiology department in an interdisciplinary manner. Results: In all six patients, fluoroscopy was used to visualise the procedure at different stages of surgery. In five patients, the procedure was successfully completed. This approach allowed us to finally assess implant position and confirm the correct and complete insertion of the electrode while the patient was still under anaesthesia. Conclusion: These cases showed positive surgical outcomes. Although the procedure is more complex than a standard approach, patients can be managed in a safe, effective and appropriate manner. The assessment of implant position in real time during surgery leads to greater patient and surgeon satisfaction. The approach presented here ensures a high quality of cochlear implant surgery even in difficult surgical situations and meets the requirements of modern surgery. [ABSTRACT FROM AUTHOR]

Gait recognition is to recognise different individuals based on their faint differences of gait characteristics, which is different from and more challengeable than the recognition of human activities based on relatively bigger differences between different motions. Existing millimetre‐wave Multiple Input Multiple Output radar point cloud data contains time‐varying three‐dimensional spatial positions, velocity, and intensity information. How to enhance the accuracy of gait recognition by effectively utilising the available radar point cloud data has become an attractive research topic in recent years. A velocity‐depth‐time (VDT) based point cloud construction method for millimetre‐wave Multiple Input Multiple Output radar is proposed for gait recognition application, which can not only alleviate the sparsity problem of mmWave point cloud but also make the constructed point cloud to exhibit temporal structural features of micro‐motions, and therefore enable the successful application of PointNet++ to mmWave‐MIMO point cloud gait recognition. New point clouds are constructed by the proposed method using public gait recognition datasets of 10 and 20 individuals from mmWave‐MIMO radar, which are used to conduct gait recognition experiments using PointNet++. The results show that the point clouds constructed based on VDT are more conducive to the gait recognition task. Even using the classic PointNet++ model, which is not specially designed for radar point clouds, high recognition accuracy can be achieved for gait recognition tasks. The recognition accuracies are improved by 11% and 12% in this work for datasets of 10 and 20 individuals, respectively, compared with the 84% and 80% achieved by the traditional method using the same dataset and the same PointNet++ model, while the accuracies are improved by 5% and 12%, respectively, compared with the 90% and 80% achieved by the original dataset thesis method corresponding to 10‐individual and 20‐individual datasets. [ABSTRACT FROM AUTHOR]

Countermeasures for chaff jamming have drawn great attention in the field of radar target detection and tracking. Current approaches for chaff jamming recognition and suppression exhibit limitations in practical effect, generalisation ability, and hybrid jamming handling. To address the above problems, the authors first transform the traditional 1D signal processing problem into a 2D semantic segmentation task and then solve it from the perspective of the dataset construction and algorithm design. For the dataset construction, the authors use both measured and simulated data to synthesise a more realistic labelled dataset (semi‐realistic dataset), which is also with good diversity due to its adjustable chaff interference background. For the algorithm design, the authors propose a Pre‐Decluttering Dual‐Stage UNet (D2UNet) to recognise and suppress chaff jamming in two stages successively, where the former provides prior attention masks for the latter. To further improve the performance of D2UNet, the authors also design a multi‐stage loss function to achieve progressive training. Extensive experimental results demonstrate that D2UNet delivers remarkable recognition accuracy (99.305%) and suppression performance (41.326 dB peak signal‐to‐jamming ratio, 0.9952 structure similarity index measure) on the semi‐realistic dataset. Its practical effect is further verified on measured data. [ABSTRACT FROM AUTHOR]

Traditional radar systems use fixed patterns and constant electromagnetic wave transmission to illuminate targets, but they often do not effectively use prior information about targets and consume significant radar resources. Cognitive radar has emerged as a way to improve resource efficiency and address these shortcomings. A joint waveform design and resource allocation strategy for cognitive radar that incorporates target situational awareness is proposed. This method integrates the interacting multiple model algorithm and the Unscented Kalman Particle Filter to achieve target situation awareness as prior knowledge. By combining the target attitude and the frequency response function of the target radar cross section at different time points in the prior knowledge, a joint beam control and power allocation strategy is formulated and transformed into an optimization problem. In addition, a cognitive pulse‐to‐pulse frequency agile waveform design method is proposed to support multiple target tracking under complex motion models. Simulation experiments demonstrate the effectiveness of this approach in obtaining accurate target situation information, achieving beam control, and optimizing power allocation. The designed waveforms can enhance radar target detection performance and improve low probability of intercept characteristics by adjusting the pulse repetition interval. This method has significant technical value. [ABSTRACT FROM AUTHOR]

Over the past decade, there have been great advancements in radio frequency sensor technology for human–computer interaction applications, such as gesture recognition, and human activity recognition more broadly. While there is a significant amount of study on these topics, in most cases, experimental data are acquired in controlled settings by directing participants what motion to articulate. However, especially for communicative motions, such as sign language, such directed data sets do not accurately capture natural, in situ articulations. This results in a difference in the distribution of directed American Sign Language (ASL) versus natural ASL, which severely degrades natural sign language recognition in real‐world scenarios. To overcome these challenges and acquire more representative data for training deep models, the authors develop an interactive gaming environment, ChessSIGN, which records video and radar data of participants as they play the game without any external direction. The authors investigate various ways of generating synthetic samples from directed ASL data, but show that ultimately such data does not offer much improvement over just initialising using imagery from ImageNet. In contrast, an interactive learning paradigm is proposed by the authors in which model training is shown to improve as more and more natural ASL samples are acquired and augmented via synthetic samples generated from a physics‐aware generative adversarial network. The authors show that the proposed approach enables the recognition of natural ASL in a real‐world setting, achieving an accuracy of 69% for 29 ASL signs—a 60% improvement over conventional training with directed ASL data. [ABSTRACT FROM AUTHOR]

Radar High‐Resolution Range Profile (HRRP) has great potential for target recognition because it can provide target structural information. Existing work commonly applies deep learning to extract deep features from HRRPs and achieve impressive recognition performance. However, most approaches are unable to distinguish between the target and non‐target regions in the feature extraction process and do not fully consider the impact of background noise, which is harmful to recognition, especially at low signal‐to‐noise ratios (SNR). To tackle these problems, the authors propose a radar HRRP target recognition framework termed Adaptive Soft Threshold Transformer (ASTT), which is composed of a patch embedding (PE) layer, ASTT blocks, and Discrete Wavelet Patch Merging (DWPM) layers. Given the limited semantic information of individual range cells, the PE layer integrates nearby isolated range cells into semantically explicit target structure patches. Thanks to its convolutional layer and attention mechanism, the ASTT blocks assign a weight to each patch to locate the target areas in the HRRP while capturing local features and constructing sequence correlations. Moreover, the ASTT block efficiently filters noise features in combination with a soft threshold function to further enhance the recognition performance at low SNR, where the threshold is adaptively determined. Utilising the reversibility of the discrete wavelet transform, the DWPM layer efficiently eliminates the loss of valuable information during the pooling process. Experiments based on simulated and measured datasets show that the proposed method has excellent target recognition performance, noise robustness, and small‐scale range shift robustness. [ABSTRACT FROM AUTHOR]

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In scenarios such as nearshore and inland waterways, the ship spots in a marine radar are easily confused with reefs and shorelines, leading to difficulties in ship identification. In such settings, the conventional ARPA method based on fractal detection and filter tracking performs relatively poorly. To accurately identify radar targets in such scenarios, a novel algorithm, namely YOSMR, based on the deep convolutional network, is proposed. The YOSMR uses the MobileNetV3(Large) network to extract ship imaging data of diverse depths and acquire feature data of various ships. Meanwhile, taking into account the issue of feature suppression for small-scale targets in algorithms composed of deep convolutional networks, the feature fusion module known as PANet has been subject to a lightweight reconstruction leveraging depthwise separable convolutions to enhance the extraction of salient features for small-scale ships while reducing model parameters and computational complexity to mitigate overfitting problems. To enhance the scale invariance of convolutional features, the feature extraction backbone is followed by an SPP module, which employs a design of four max-pooling constructs to preserve the prominent ship features within the feature representations. In the prediction head, the Cluster-NMS method and α-DIoU function are used to optimize non-maximum suppression (NMS) and positioning loss of prediction boxes, improving the accuracy and convergence speed of the algorithm. The experiments showed that the recall, accuracy, and precision of YOSMR reached 0.9308, 0.9204, and 0.9215, respectively. The identification efficacy of this algorithm exceeds that of various YOLO algorithms and other lightweight algorithms. In addition, the parameter size and calculational consumption were controlled to only 12.4 M and 8.63 G, respectively, exhibiting an 80.18% and 86.9% decrease compared to the standard YOLO model. As a result, the YOSMR displays a substantial advantage in terms of convolutional computation. Hence, the algorithm achieves an accurate identification of ships with different trail features and various scenes in marine radar images, especially in different interference and extreme scenarios, showing good robustness and applicability. [ABSTRACT FROM AUTHOR]

Radar radiation source recognition technology is vital in electronic countermeasures, electromagnetic control, and air traffic management. Its primary function is to identify radar signals in real time by computing and inferring the parameters of intercepted signals. With the rapid advancement of AI technology, deep learning algorithms have shown promising results in addressing the challenges of radar radiation source recognition. However, significant obstacles remain: the radar radiation source data often exhibit large-scale, unbalanced sample distribution and incomplete sample labeling, resulting in limited training data resources. Additionally, in practical applications, models must be deployed on outdoor edge computing terminals, where the storage and computing capabilities of lightweight embedded systems are limited. This paper focuses on overcoming the constraints posed by data resources and edge computing capabilities to design and deploy large-scale radar radiation source recognition algorithms. Initially, it addresses the issues related to large-scale radar radiation source samples through data analysis, preprocessing, and feature selection, extracting and forming prior knowledge information. Subsequently, a model named RIR-DA (Radar ID Recognition based on Deep Learning Autoencoder) is developed, integrating this prior knowledge. The RIR-DA model successfully identified 96 radar radiation source targets with an accuracy exceeding 95% in a dataset characterized by a highly imbalanced sample distribution. To tackle the challenges of poor migration effects and low computational efficiency on lightweight edge computing platforms, a parallel acceleration scheme based on the embedded microprocessor T4240 is designed. This approach achieved a nearly eightfold increase in computational speed while maintaining the original training performance. Furthermore, an integrated solution for a radar radiation source intelligent detection system combining PC devices and edge devices is preliminarily designed. Experimental results demonstrate that, compared to existing radar radiation source target recognition algorithms, the proposed method offers superior model performance and greater practical extensibility. This research provides an innovative exploratory solution for the industrial application of deep learning models in radar radiation source recognition. [ABSTRACT FROM AUTHOR]

Distributed Inverse Synthetic Aperture Radar (ISAR) systems employ multiple spatially separated radars to observe a target, with the potential to enhance radar imaging azimuth resolution and gather more target information. Due to the existence of gaps in the observation angles of each radars, the coherence between pulses of radar echo is disrupted during fusion imaging, making it challenging for the Range-Doppler (RD) algorithm to achieve well-focused images. This paper proposes an imaging method based on sparse signal recovery (SSR), using the reweighted ${l_1}$ l 1 norm with convolution and total variation as regularization terms. This approach not only yields well-focused ISAR images but also better preserves the overall target information compared to other methods, while also exhibiting excellent noise resistance. In addition, the alternating direction method of multipliers (ADMM) algorithm is utilized for the solution to reduce computational complexity. Simulation and measured data verify the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Weather radar is an active remote sensing device used to monitor the full lifecycle changes in severe convective weather with high spatial and temporal resolution. Effective radar calibration is a crucial foundation for ensuring the high-quality application of observational data. This paper utilizes a UAV platform equipped with a high-precision RTK system and standard metal spheres to study the principles and methods of metal sphere calibration, constructing a complete calibration process and calibration accuracy evaluation metrics. Additionally, a collocated radar comparison observation experiment was conducted for cross-validation, and metal sphere calibration tests were performed on problematic radars. The experimental results indicate the following: (1) The combined application of a high-precision RTK system and a laser range camera can provide real-time position information on the metal sphere, improving the efficiency of radar target acquisition. (2) The calibration method based on UAV-suspended metal spheres can periodically conduct the quantitative calibration of Z and ZDR, achieving calibration accuracies within 0.5 dB and 0.2 dB, respectively, and supports the qualitative inspection of key parameters such as beamwidth and pulse width. (3) During field tests, a high success rate "coarse adjustment + fine adjustment + staring" sphere-finding technique was established, based on automatic switching between RHI, PPI, and FIX scanning modes. This method directs the UAV to adjust the metal sphere to the center of the radar distance bin, reducing the impact of uneven beam filling and bin crossing, ensuring the accuracy of scattering characteristic measurements. [ABSTRACT FROM AUTHOR]

Synthetic Aperture Radar (SAR) is renowned for its all-weather and all-time imaging capabilities, making it invaluable for ship target recognition. Despite the advancements in deep learning models, the efficiency of Convolutional Neural Networks (CNNs) in the frequency domain is often constrained by memory limitations and the stringent real-time requirements of embedded systems. To surmount these obstacles, we introduce the Split_ Composite method, an innovative convolution acceleration technique grounded in Fast Fourier Transform (FFT). This method employs input block decomposition and a composite zero-padding approach to streamline memory bandwidth and computational complexity via optimized frequency-domain convolution and image reconstruction. By capitalizing on FFT's inherent periodicity to augment frequency resolution, Split_ Composite facilitates weight sharing, curtailing both memory access and computational demands. Our experiments, conducted using the OpenSARShip-4 dataset, confirm that the Split_ Composite method upholds high recognition precision while markedly enhancing inference velocity, especially in the realm of large-scale data processing, thereby exhibiting exceptional scalability and efficiency. When juxtaposed with state-of-the-art convolution optimization technologies such as Winograd and TensorRT, Split_ Composite has demonstrated a significant lead in inference speed without compromising the precision of recognition. [ABSTRACT FROM AUTHOR]

This paper presents exploratory work on the use of Testing with Concept Activation Vectors (TCAV) within a concept-based explanation framework to provide the explainability of millimeter-wave (MMW) radar target recognition. Given that the radar spectrum is difficult for non-domain experts to understand visually, defining concepts for radar remains a significant challenge. In response, drawing from the visual analytical experience of experts, some basic concepts based on brightness, striping, size, and shape are adopted in this paper. However, the simplicity of basic concept definitions sometimes leads to vague correlations with recognition targets and significant variability among individuals, limiting their adaptability to specific tasks. To address these issues, this study proposes a Basic Concept-Guided Deep Embedding Clustering (BCG-DEC) method that can effectively discover task-specific composite concepts. BCG-DEC methodically analyzes the deep semantic information of radar data through four distinct stages from the perspective of concept discovery, ensuring that the concepts discovered accurately conform to the task-specific property of MMW radar target recognition. The experimental results show that the proposed method not only expands the number of concepts but also effectively solves the problem of difficulty in annotating basic concepts. In the ROD2021 MMW radar explainability experiments, the concepts proved crucial for recognizing specific categories of radar targets. [ABSTRACT FROM AUTHOR]

Based on the characteristic of ubiquitous radar emitting low-gain wide beam, a method of long-time coherent integration (LTCI) is required to enhance target detection capability. However, high-speed and highly maneuverable targets can cause Doppler frequency migration (DFM), range migration (RM), and velocity ambiguity (VA), severely degrading the performance of LTCI. Additionally, the number of targets is unknown and variable, and the presence of clutter further complicates the target tracking problem. To address these challenges, we propose a hybrid integration method to achieve joint detection and estimation of multiple high-speed, and highly maneuverable targets. Firstly, we compensate for first-order RM using the keystone transform (KT) and generate corresponding sub-range-Doppler (SRD) planes with different folding factors to achieve VA compensation. These SRD planes are then stitched together to form an extended range-Doppler (ERD) plane, which covers a broader velocity range. Secondly, during the track-before-detect (TBD) process, tracking is performed directly on the ERD plane. We use the sequential Monte Carlo (SMC) approximation of the probability hypothesis density (PHD) to propagate multi-target states. Additionally, we propose an amplitude-based adaptive prior distribution method and a line spread model (LSM) observation model to compensate for DFM. Since the acceleration of the target is included in the particle state, using particles to search for DFM does not increase the computational load. To address the issue of misclassifying mirror targets as real targets in the SRD plane, we propose a particle space projection method. By stacking the SRD planes to create a folding range-Doppler (FRD) space, particles are projected along the folding factor dimension, and then, the particles are clustered to eliminate the influence of the mirror targets. Finally, through simulation experiments, the superiority of the LSM for targets with acceleration was demonstrated. In comparative experiments, the proposed method showed superior performance and robustness compared to traditional methods, achieving a balance between performance and computational efficiency. Furthermore, the proposed method's capability to detect and track multiple high-speed and highly maneuverable targets was validated using actual data from a ubiquitous radar system. [ABSTRACT FROM AUTHOR]

Under rainy conditions, atmospheric settling particles have significant depolarization effects on radar waves and thus affect the target detection performance. This paper establishes an extended target detection model for fully polarized radar under complex rainy conditions and proposes two polarization and waveform optimization methods by taking into account the transmission effect of rainfall. If the rainfall information is known, the polarization and waveform for transmitting and receiving are optimized by maximizing the system Signal-to-Clutter/Noise Ratio (SCNR). While the rainfall information is absent, the optimal transmitting polarization and waveform are obtained by directly compensating the transmission effect from non-rainfall optimization results using fully polarized radar observation parameters. Using measured data from the T-72 tank, The experimental results verify the effectiveness and robustness of the two methods in real scenarios and 4 dB on the improvement of SCNR can be achieved. [ABSTRACT FROM AUTHOR]

The integration of both sensing and communication functions is a crucial feature for future communication systems. This paper considers a novel scenario where a radar covers multiple small-cell base stations which operate in different spectra. Due to the limited spectra resource, the radar needs to reuse the spectra of one BS for tracking. To suppress interference and improve performance, we propose a framework including two stages and the corresponding communication and sensing algorithms. Specifically, at the detection stage, we aim to minimize the system transmit power while maintaining the performance of both radar and communication. At the tracking stage, our goal is to maximize the radar sensing performance under a given power budget, while ensuring communication quality. Due to the complexity of the original problem, we address it by introducing auxiliary variables and proposing a penalty dual decomposition-based algorithm, enabling us to solve a more tractable form of the problem. In the inner loop, we propose a concave–convex procedure-based algorithm to handle the optimization problem, while adopting the block coordinate descent algorithm to iteratively update the variables. In the outer loop, we update the penalty term or Lagrange multipliers. Furthermore, we propose a radar target parameter estimation algorithm based on successive interference cancellation, which aims to mitigate communication interference. Finally, numerical simulations demonstrate the effectiveness of the proposed system, and the superior performance of our proposed algorithms over benchmark algorithms. [ABSTRACT FROM AUTHOR]

This study addresses the state estimation problem of discrete‐time non‐linear stochastic systems with non‐Gaussian noises, particularly impulsive noises. Instead of minimizing the mean square error of the state estimate, which tends to excessively focus on outliers caused by non‐Gaussian noises, the ℓ1${\ell }_1$ norm‐based non‐linear recursive filter (L1KF) is put forward in this paper. Here, minimizing the ℓ1${\ell }_1$ norm of model errors is actually to pursue the minimum sum of absolute values of all errors, which is equitable to all model errors rather than paying much attention on outliers. To further improve estimation accuracy, a recursive nonlinear smoother (L1KS) is proposed, based on minimizing the ℓ1${\ell }_1$ norm of model errors. The proposed ℓ1${\ell }_1$ norm‐based filter and smoother are implemented using unscented transformation for statistical linear regression applied to nonlinear models. Additionally, the computational complexity of the proposed method is analysed. Simulation results of tracking a radar target with impulsive noises demonstrate the effectiveness and robustness of the proposed estimator. [ABSTRACT FROM AUTHOR]

Multichannel radars generally need to utilize a certain amount of training samples to estimate the covariance matrix of clutter for target detection. Due to factors such as severe terrain fluctuations and complex electromagnetic environments, the training samples usually have different statistical characteristics from the data to be detected. One of the most common scenarios is that all data have the same clutter covariance matrix structure, while different data have different power mismatches, called power heterogeneous characteristics. For detection problems in the power heterogeneous clutter environments, we propose detectors based on alternate estimation, using the generalized likelihood ratio test (GLRT) criterion, Rao criterion, Wald criterion, Gradient criterion, and Durbin criterion. Monte Carlo simulation experiments and real data indicate that the detector based on the Rao criterion has the highest probability of detection (PD). Furthermore, when signal mismatch occurs, the detector based on the GLRT criterion has the best selectivity, while the detector based on the Durbin criterion has the most robust detection performance. [ABSTRACT FROM AUTHOR]

In this paper, a technology named SCM−ANN combining physical scattering mechanisms and artificial intelligence is proposed to realize radar cross-section (RCS) extrapolation of non-cooperative conductor targets with higher efficiency. Firstly, an adaptive scattering center (SC) extraction algorithm is used to construct the scattering center model (SCM) for non-cooperative targets from radar echoes in the low-frequency band (LFB). Secondly, an artificial neural network (ANN) is constructed to capture the nonlinear relationship between the real LFB echoes and those reconstructed from the SCM. Finally, the SCM is used to reconstruct echoes in the high-frequency band (HFB), and these reconstructions, together with the trained ANN, optimize the extrapolated HFB RCS. For the SCM−ANN technology, physical mechanistic modes are used for trend prediction, and artificial intelligence is used for regression optimization based on trend prediction. Simulation results show that the proposed method can achieve a 50% frequency extrapolation range, with an average prediction error reduction of up to 40% compared with the traditional scheme. By incorporating physical mechanisms, this proposed approach offers improved accuracy and an extended extrapolation range compared with the RCS extrapolation techniques relying solely on numerical prediction. [ABSTRACT FROM AUTHOR]

The authors investigate the performance of an original multifunction system with two in‐band full‐duplex capable joint radar, communications and security (JRCS) transceivers in the presence of an eavesdropper. The system concept can be generalised to a network of more than two JRCS transceivers and multiple eavesdroppers, despite the present study focusing on the three‐node scenario. By combining a bandlimited pseudonoise waveform with a data‐containing orthogonal frequency‐division multiplexing (OFDM) waveform, the authors are able to ensure a certain jamming‐to‐signal power ratio (JSR) at the eavesdropper, whilst ideal synchronisation ensures that jamming causes no deterioration to their own data transfer or radar sensing performance as it is possible to remove just the known pseudonoise waveform. To validate the system, the authors investigate through simulations the OFDM symbol error rates of all the receivers, radar target signal‐to‐interference‐plus‐noise power ratios as well as receiver operating characteristic curves, and eavesdropper's detection signal‐to‐noise power ratios through two‐branch receiver cross‐correlation. The results show that already a very low JSR of −20 dB can improve physical‐layer security without a significant increase in friendly symbol error rate or deterioration in radar performance. Additionally, other full‐duplex transceivers potentially occupying the same radio resources improve the secrecy even further. [ABSTRACT FROM AUTHOR]

Radar systems are a topic of great interest, especially due to their extensive range of applications and ability to operate in all weather conditions. Modern radars have high requirements such as its resolution, accuracy and robustness, depending on the application. Noise Radar Technology (NRT) has the upper hand when compared to conventional radar technology in several characteristics. Its robustness to jamming, low Mutual Interference and low probability of intercept are good examples of these advantages. However, its signal processing is more complex than that associated to a conventional radar. Artificial Intelligence (AI)‐based signal processing is getting increasing attention from the research community. However, there is yet not much research on these methods for noise radar signal processing. The aim of the authors is to provide general information regarding the research performed on radar systems using AI and draw conclusions about the future of AI in noise radar. The authors introduce the use of AI‐based algorithms for NRT and provide results for its use. [ABSTRACT FROM AUTHOR]

This paper presents an S-band power amplifier (PA) operating in the 2.9~3.2 GHz range for 2nd harmonic-based target detection radar. The input and output matching networks utilize transmission lines and λ/4 open stubs at 2nd harmonic frequencies to effectively match the load impedance to the optimal power matching contours at fundamental frequencies while achieving high 2nd harmonic suppression characteristics. This design achieves these goals without simultaneously introducing additional insertion losses at the input and output. Single measurements of the fabricated PA demonstrate a maximum saturated power exceeding 40 dBm, power gain ranging from 11.6 to 13.3 dB, and 2nd harmonic suppression level of 58.6 dBc or better across the 2.9~3.2 GHz range. When employed as a driver amplifier in the transmitter system, the PA exhibits a 2nd harmonic suppression level of 60 dBc or better within the 3.0~3.2 GHz range, affirming its suitability for 2nd harmonic-based target detection radar applications. [ABSTRACT FROM AUTHOR]

This paper proposes the design of 1.2-1.3 GHz, 2.5-3 GHz and 5.4-5.8 GHz MMIC voltage variable attenuator (VVA) realized using 0.25 μm GaAs pHEMT technology. It is a wideband voltage variable attenuator as it covers entire radar frequency bands. It provides a minimum attenuation of 2 dB in L and S-Band and 3 dB in C-Band and maximum attenuation of 72 dB in L-Band, 60 dB in S-Band and 47 dB in C-Band with attenuation flatness of 3 dB in L and S-Band and 1 dB in CBand. The phase response of the attenuator is also shown in this paper. The attenuator is perfectly matched with source and load impedances. It shows full-band stability. By convention, noise figure is equal to attenuation. The novelty of this proposed design is source controlled attenuator using gm-reduction and double active termination techniques with noise figure less than attenuation. These techniques increase the dynamic range of attenuation and reduce noise figure also. The double active termination technique also contributes in reducing noise figure below each attenuation level. It is necessary to keep noise figure below attenuation because the attenuator will be used in RF front-end of radar receiver. By keeping noise figure below attenuation, sensitivity of radar receiver will improve. Input 1 dB compression point of the proposed attenuator at maximum attenuation are at -4.3 dBm in L-Band, -5.9 dBm in S-Band and -5.3 dBm in C-Band and OIP3 at minimum attenuation are at -4.4 dBm in L-Band, -4.6 dBm in S-Band and -5 dBm in C-Band. The ideal and post-layout simulation results are presented in this paper. Figure of merit of the proposed attenuator is 280 in LBand, 70.3 in S-Band and 78.54 in C-Band. The attenuator can be used in single target tracking radar as well as in T/R module of AESA radar. [ABSTRACT FROM AUTHOR]

Distributed interrupted sampling repeater jamming (D-ISRJ) is the application of interrupted sampling repeater jamming technology within the framework of distributed jamming systems. It can generate coherent false targets after passing through the target radar's matched filter, but these false targets exhibit strong regularity in range and amplitude. Addressing this issue, a distributed interrupted sampling frequency-shifted repeater jamming method based on the group teaching optimization algorithm (GTOA) is proposed in this paper. By introducing frequency-shifted modulation during the retransmission of the jamming signal, the frequency shift amount of the jamming unit in each round of repeater jamming is used as an optimization variable to construct an optimization model for distributed interrupted sampling frequency-shifted repeater jamming. The parameters are then solved by using GTOA. Simulations are conducted to analyze the jamming effects under different distributed jamming modes, and the proposed optimization algorithm is compared to common swarm intelligence algorithms in the same optimization model. The method proposed in this paper can be used in the field of precision electronic warfare to improve the jamming effect of synthetic aperture radar. Experimental results show that under the given simulation conditions, the jamming signal generated by the proposed method can achieve better jamming effects. [ABSTRACT FROM AUTHOR]

Advancements in technology have led to the development of high-resolution radars that provide highly detailed images of targets over a wide field of view. These radar images can significantly improve filtering and tracking accuracy, especially in marine environments. However, traditional methods like the binary and barycentric methods are inadequate, as they do not capture critical information for tracking targets, such as direction. Therefore, in this article, a new method for improving the estimation of target characteristics to improve tracking accuracy based on the processing of high-resolution radar images is proposed. The proposed method consists of three modules. Firstly, the radar images of the target are decomposed into layers to determine local maximum regions and to estimate target characteristics such as reflected energy and area and the centroids of plots. In the second module, the plots are grouped using a fuzzy logic system. The inputs of the fuzzy logic system include the above-estimated parameters of the targets. The output is the chance that the plot is at the center of the target. The plots with the highest chances are considered target centers, and the other plots are grouped into their respective target. At the end, the true target center is recalculated. This process is called modified fuzzy C-means (FCM-M). In the last stage, the estimated target center coordinates are fed into a Kalman filter (KF) to solve filtering and tracking problems. The performance is evaluated using a measured radar dataset. The experimental results show that the proposed method performs better than traditional methods based on binary image processing. Additionally, the proposed method offers extra information about the targets, such as their direction, the energy of each reflected part, and the area, which traditional methods does not provide. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar (SAR) automatic target recognition (ATR) models based on deep neural networks (DNNs) are susceptible to adversarial attacks. In this study, we proposed an SAR black-box local adversarial attack algorithm named attention heat mapbased black-box local adversarial attack (AH-BLAA). First, we designed an attention heat map extraction module combined with the layer-wise relevance propagation (LRP) algorithm to obtain the high concerning areas of the SAR-ATR models. Then, to generate SAR adversarial attack examples, we designed a perturbation generator module, introducing the structural dissimilarity (DSSIM) metric in the loss function to limit image distortion and the differential evolution (DE) algorithm to search for optimal perturbations. Experimental results on the MSTAR and FUSAR-Ship datasets showed that compared with existing adversarial attack algorithms, the attack success rate of the AH-BLAA algorithm increased by 0.63% to 33.59% and 1.05% to 17.65%, respectively. Moreover, the lowest perturbation ratios reached 0.23% and 0.13%, respectively. [ABSTRACT FROM AUTHOR]

Nanodrones are insect-sized drones that could fly in complex environments and confined spaces, and act as an emerging tool for covert surveillance and intelligence attacks, which would become a potential threat to national security. Radar has the advantage of wide range, all-day, and all-weather detection ability, making it a means of detecting such threat. First, this paper introduces a pertinent multiple-input multiple-output (MIMO) millimeter-wave (MMW) radar system, with the advantages of low cost and high accuracy. It is utilized to detect three targets: nanodrone, small helicopter, and mechanical bird, through which more detailed features can be obtained. Then, the echo data of the three targets are processed and analyzed, and their distinct micro-Doppler characteristics were obtained. Finally, the Radar Transformer target classification network is used to classify and identify the targets. It has been confirmed that desired results could be achieved through the above process. [ABSTRACT FROM AUTHOR]

Traditional radar target detectors, which are model-driven, often suffer remarkable performance degradation in complex clutter environments due to the weakness in modeling the unpredictable clutter. Deep learning (DL) methods, which are data-driven, have been introduced into the field of radar target detection (RTD) since their intrinsic non-linear feature extraction ability can enhance the separability between targets and the clutter. However, existing DL-based detectors are unattractive since they require a large amount of independent and identically distributed (i.i.d.) training samples of target tasks and fail to be generalized to the other new tasks. Given this issue, incorporating the strategy of meta-learning, we reformulate the RTD task as a few-shot classification problem and develop the Inter-frame Contrastive Learning-Based Meta Detector (IfCMD) to generalize to the new task efficiently with only a few samples. Moreover, to further separate targets from the clutter, we equip our model with Siamese architecture and introduce the supervised contrastive loss into the proposed model to explore hard negative samples, which have the targets overwhelmed by the clutter in the Doppler domain. Experimental results on simulated data demonstrate competitive detection performance for moving targets and superior generalization ability for new tasks of the proposed method. [ABSTRACT FROM AUTHOR]

In practical radar applications, the diversity of wideband transmission signals presents a significant challenge for radar target recognition systems. Traditional electromagnetic (EM) simulation methods often require the point-by-point sampling of target echo signals under specific radiation sources, and this process must be repeated for different transmission signals. This results in extensive EM computations and low computational efficiency. Additionally, the physical attribute information of the target is often obscured within the simulated echoes, complicating feature extraction. To address these issues, we propose a novel method for the efficient and rapid modeling and analysis of complex target time-domain echoes based on a forward scattering center model. This method constructs an impulse response model of the target under unit impulse signal excitation, representing the inherent scattering properties of the target and remaining unaffected by changes in the radiation source. Subsequently, this model is convolved with arbitrary wideband input signals to quickly reconstruct the wideband echo signals of the target. Numerical examples validate the accuracy and effectiveness of the proposed model. This method offers several advantages: firstly, it provides high computational efficiency by quickly convolving with the input signals, thereby avoiding the extensive EM calculations required by traditional methods due to changes in the radiation source. Secondly, it achieves significant data compression; the proposed echo model only requires the model parameters to be calculated at the central frequency point, enabling the rapid reconstruction of target echo data across a wideband range and effectively reducing storage requirements. Finally, it presents clear and complete physical attributes by employing a "cause-to-effect" forward-modeling approach, where the model parameters fully represent the inherent physical properties of the target. This effectively addresses the issue of physical interpretability in optical region radar target recognition. [ABSTRACT FROM AUTHOR]