Search

The objective of the present work is to investigate the influence of nanoparticles of copper within the base fluid (water) on magneto-hydrodynamic mixed-convection flow in a square cavity with internal generation. A control finite volume method and SIMPLER algorithm are used in the numerical calculations. The geometry is a lid-driven square cavity with four interior square adiabatic obstacles. A uniform heat source is located in a part of the left wall and a part of the right wall of the enclosure is maintained at cooler temperature while the remaining parts of the two walls are thermally insulated. Both the upper and bottom walls of the cavity are considered to be adiabatic. A comparison with previously published works shows a very good agreement. It is observed that the Richardson number, Ri, significantly alters the behavior of streamlines when increased from 0.1 to 100.0. Also, the heat source position parameter, D, significantly changes the pattern of isotherms and its strength shifted when D moves from 0.3 to 0.7.

In this paper, we present an initial value technique for solving self-adjoint singularly perturbed linear boundary value problems. The original problem is reduced to its normal form and the reduced problem is converted to first order initial value problems. This replacement is significant from the computational point of view. The classical fourth order Runge-Kutta method is used to solve these initial value problems. This approach to solve singularly perturbed boundary-value problems is numerically very appealing. To demonstrate the applicability of this method, we have applied it on several linear examples with left-end boundary layer and right-end layer. From the numerical results, the method seems accurate and solutions to problems with extremely thin boundary layers are obtained.

A numerical investigation of two dimensional steady magnetohydrodynamics heat and mass transfer by laminar free convection from a radiative horizontal circular cylinder in a non-Darcy porous medium is presented by taking into account the Soret/Dufour effects. The boundary layer conservation equations, which are parabolic in nature, are normalized into non-similar form and then solved numerically with the well-tested, efficient, implicit, stable Keller–Box finite-difference scheme. We use simple central difference derivatives and averages at the mid points of net rectangles to get finite difference equations with a second order truncation error. We have conducted a grid sensitivity and time calculation of the solution execution. Numerical results are obtained for the velocity, temperature and concentration distributions, as well as the local skin friction, Nusselt number and Sherwood number for several values of the parameters. The dependency of the thermophysical properties has been discussed on the parameters and shown graphically. The Darcy number accelerates the flow due to a corresponding rise in permeability of the regime and concomitant decrease in Darcian impedance. A comparative study between the previously published and present results in a limiting sense is found in an excellent agreement.

Cardiovascular disease (CVD) is a leading cause of mortality and morbidity in developed\ud countries. CVD is produced by atherosclerotic lesions that reduce arterial lumen size through\ud plaque formation and arterial thickening. This decreases blood flow to the heart and frequently\ud manifests in severe hemodynamic complications like myocardial infarction or angina pectoris. A\ud drug delivery system (DDS) is a clinical methodology (formulation or device) which enables the\ud introduction of a therapeutic substance into the body and improves its efficacy and safety by\ud controlling the rate, time, and place of release of drugs in the body. Drug delivery technologies\ud modify drug release profile, absorption, distribution and elimination for the benefit of improving\ud product effectiveness and patient convenience and compliance. The review explores extensively\ud hemodynamic aspects of the cardiovascular system and diseases which can be treated via nanodrug delivery with a comprehensive overview of research efforts in these areas. Nanomedicine is\ud an expeditiously growing science in which biomaterials (drugs) engineered at the nanoscale are\ud implemented to enhance therapeutic performance and improve patient treatments. Among the\ud many other diverse applications of nanomaterials in medicine (e.g. bio-UIRtribology, tissue repair,\ud orthopaedic implants etc), nano-drug delivery systems have emerged as among the most\ud promising. This technology has evolved into a significant platform for delivering successfully\ud remedial agents to diseased sites with substantially greater target control, precision and\ud sophistication. By greatly increasing site specificity, lowering toxicity and target-oriented \ud 2\ud delivery, nanotechnological drug delivery (“nano-pharmacodynamics”) has consistently achieved\ud very impressive consistency, benefits and has aided massively in the fight against potentially lethal\ud haemotological diseases. Recently, nanomedicine has embraced an even wider range of\ud applications including the administration of chemotherapeutic agents, biological agents, diabetes\ud regulation, sterilization, cancer and tumour inhibition, rheumatic fever mitigation etc. The current\ud review presents a comprehensive appraisal of nano-drug delivery systems, simulation with\ud engineering methods, types of nanodrugs and their effectiveness. The excellent targeting properties\ud attainable with magnetic nanoparticles as engineering pharmacodynamic agents, in particular,\ud offers huge potential in the treatment of many complex hemodynamic disorders. Furthermore, the\ud present review summarizes the efficiency of drug carrier nanoparticles in mitigating the adverse\ud effects of stenosed blood vessels and outlines other future potential uses for nano-drugs in\ud biomedical applications.

PurposeThis paper aims to numerically investigate the two-dimensional unsteady laminar magnetohydrodynamic bioconvection flow and heat transfer of an electrically conducting non-Newtonian Casson thin film with uniform thickness over a horizontal elastic sheet emerging from a slit in the presence of viscous dissipation. The composite effects of variable heat, mass, nanoparticle volume fraction and gyrotactic micro-organism flux are considered as is hydrodynamic (wall) slip. The Buongiorno nanoscale model is deployed which features Brownian motion and thermophoresis effects. The model studies the manufacturing fluid dynamics of smart magnetic bio-nano-polymer coatings.Design/methodology/approachThe coupled non-linear partial differential boundary-layer equations governing the flow, heat and nano-particle and micro-organism mass transfer are reduced to a set of coupled non-dimensional equations using the appropriate transformations and then solved as an nonlinear boundary value problem with the semi-numerical Liao homotopy analysis method (HAM).Validation with a generalized differential quadrature (GDQ) numerical technique is included.FindingsAn increase in velocity slip results in a significant decrement in skin friction coefficient and Sherwood number, whereas it generates a substantial enhancement in Nusselt number and motile micro-organism number density. The computations reveal that the bioconvection Schmidt number decreases the micro-organism concentration and boundary-layer thickness which is attributable to a rise in viscous diffusion rate. Increasing bioconvection Péclet number substantially elevates the temperatures in the regime, thermal boundary layer thickness, nanoparticle concentration values and nano-particle species boundary layer thickness. The computations demonstrate the excellent versatility of HAM and GDQ in solving nonlinear multi-physical nano-bioconvection flows in thermal sciences and furthermore are relevant to application in the synthesis of smart biopolymers, microbial fuel cell coatings, etc.Research limitations/implicationsThe numerical study is valid for two-dimensional, unsteady, laminar Casson film flow with nanoparticles over an elastic sheet in presence of variable heat, mass and nanoparticle volume fraction flux. The film has uniform thickness and flow is transpiring from slit which is fixed at origin.Social implicationsThe study has significant applications in the manufacturing dynamics of nano-bio-polymers and the magnetic field control of materials processing systems. Furthermore, it is relevant to application in the synthesis of smart biopolymers, microbial fuel cell coatings, etc.Originality/valueThe originality of the study is to address the simultaneous effects of unsteady and variable surface fluxes on Casson nanofluid transport of gyrotactic bio-convection thin film over a stretching sheet in the presence of a transverse magnetic field. Validation of HAM with a GDQ numerical technique is included. The present numerical approaches (HAM and GDQ) offer excellent promise in simulating such multi-physical problems of interest in thermal thin film rheological fluid dynamics.

Entropy generation in a two-dimensional steady laminar thin film convection flow of a non-Newtonian nanofluid (Ostwald-de-Waele-type power-law fluid with embedded nanoparticles) along an inclined plate is examined theoretically. A revised Buongiorno model is adopted for nanoscale effects, which includes the effects of the Brownian motion and thermophoresis. The nanofluid particle fraction on the boundary is passively rather than actively controlled. A convective boundary condition is employed. The local nonsimilarity method is used to solve the dimensionless nonlinear system of governing equations. Validation with earlier published results is included. A decrease in entropy generation is induced due to fluid friction associated with an increasing value of the rheological power-law index. The Brownian motion of nanoparticles enhances thermal convection via the enhanced transport of heat in microconvection surrounding individual nanoparticles. A higher convective parameter implies more intense convective heating of the plate, which increases the temperature gradient. An increase in the thermophoresis parameter decreases the nanoparticle volume fraction near the wall and increases it further from the wall. Entropy generation is also reduced with enhancement of the thermophoresis effect throughout the boundary layer.

An incompressible flow of a non-Newtonian Spriggs fluid over an unsteady oscillating plate is investigated using the Homotopy Analysis Method (HAM). An analytic solution of sine and cosine oscillations of the plate has been obtained. The similarity transformation is introduced to reduce the governing partial differential equations into a single non-linear dimensionless partial differential equation. The effects of the power index of Spriggs fluid and convergence control parameter of HAM for the flow are studied extensively. The range of the convergence control parameter for convergence of series solution for different values of the power index of Spriggs fluid is obtained. The solution for a Spriggs fluid is noticeably different from the solution obtained for a Newtonian fluid. The influences of the shear thinning and shear thickening fluid on the velocity profile are shown graphically. The transient flow effect is higher for non-Newtonian Spriggs fluid than that of a Newtonian fluid. It is also observed that the interval to reach the steady state for the cosine case is less than the sine case. The applications of Stokes’ second problem have been widely found in the variety of fields of biomedical, medical, chemical, micro and nanotechnology.

The combined effects of nonlinear thermal convection and radiation in 3D boundary layer flow of non-Newtonian nanofluid are scrutinized numerically. The flow is induced by the stretching of a flat plate in two lateral directions. The mechanism of heat and mass transport under thermophoretic and Brownian motion is elaborated via implementation of the thermal convective condition. The prevailing two-point nonlinear boundary value problem is reduced to a two-point ordinary differential problem by employing suitable similarity transformations. The solutions are computed by the implementation of homotopic scheme. At the end, a comprehensive parametric study has been conducted to analyze the typical trend of the solutions. It is found that the nanoparticle volume fraction and temperature profiles are stronger for the case of solar radiation in comparison with problem without radiation. Keywords: Non-linear convection, Nonlinear density temperature (NDT), Nonlinear thermal radiation, Three dimensional flow, Maxwell fluid, Nanoparticles

Present study explores the discussion on combined effects of Joule heating and viscous dissipation on a three-dimensional flow of Oldroyd B nanofluid. The model describes that flow is generated by bidirectional stretching sheet with thermophoresis and Brownian motion effects and also energy equation contain radiation term. Converted self similar equations are solved via shooting algorithm with RKF 45 method. The influences of Joule heating and viscous dissipation are discussed through graphs. It is noticed that combination of Joule and viscous heating, the temperature of Oldroyd B nanofluid profile increases. Keywords: Three-dimensional flow, Oldroyd B nanofluid, Joule heating, Viscous dissipation, Thermal radiation

The heat and mass transfer of rotating Casson nanofluid flow is incorporated in the present study. Influence of magnetic field, nonlinear thermal radiation, viscous dissipation and Joule heating effects are taken into the account. A set of nonlinear ordinary differential equations are obtained from the governing partial differential equations with the aid of suitable similarity transformations. The resultant equations are solved for the numerical solution using Runge-Kutta-Fehlberg fourth-fifth order method along with shooting technique. The impact of several existing physical parameter on velocity, temperature and nanofluid concentration profiles are analyzed through graphs and tables in detail. It is found that, velocity component decreases and temperature component increases for rotating parameter.

This paper considers the problem of steady, boundary layer flow and heat transfer of dusty nanofluid over a stretching surface in the presence of non-uniform heat source/sink and nonlinear thermal radiation with Biot number effect. The base fluid (water) is considered with silver (Ag) nanoparticles along with suspended dust particles. The governing equations in partial form are reduced to a system of non-linear ordinary differential equations using suitable similarity transformations. An effective Runge–Kutta–Fehlberg fourth-fifth order method along with shooting technique is used for the solution. The effects of flow parameters such as nanofluid interaction parameter, magnetic parameter, solid volume fraction parameter, Prandtl number, heat source/sink parameters, radiation parameter, temperature ratio parameter and Biot number on the flow field and heat-transfer characteristics were obtained and are tabulated. Useful discussions were carried out with the help of plotted graphs and tables. Under the limiting cases, comparison with the existing results was made and found to be in good agreement.

Background This paper explores the impact of thermal radiation on boundary layer flow of dusty hyperbolic tangent fluid over a stretching sheet in the presence of magnetic field. The flow is generated by the action of two equal and opposite. A uniform magnetic field is imposed along the y-axis and the sheet being stretched with the velocity along the x-axis. The number density is assumed to be constant and volume fraction of dust particles is neglected. The fluid and dust particles motions are coupled only through drag and heat transfer between them. Methods The method of solution involves similarity transformation which reduces the partial differential equations into a non-linear ordinary differential equation. These non-linear ordinary differential equations have been solved by applying Runge-Kutta-Fehlberg forth-fifth order method (RKF45 Method) with help of shooting technique. Results The velocity and temperature profile for each fluid and dust phase are aforethought to research the influence of assorted flow dominant parameters. The numerical values for skin friction coefficient and Nusselt number are maintained in Tables 3 and 4. The numerical results of a present investigation are compared with previous published results and located to be sensible agreement as shown in Tables 1 and 2. Conclusion It is scrutinized that, the temperature profile and corresponding boundary layer thickness was depressed by uplifting the Prandtl number. Further, an increase in the thermal boundary layer thickness and decrease in momentum boundary layer thickness was observed for the increasing values of the magnetic parameter.

In this paper we present numerical solutions to coupled non-linear governing equations of thermo-viscous fluid flow in cylindrical geometry using MATHEMATICA software solver. The numerical results are presented in terms of velocity, temperature and pressure distribution for various values of the material parameters such as the thermo-mechanical stress coefficient, thermal conductivity coefficient, Reiner Rivlin cross viscosity coefficient and the Prandtl number in the form of tables and graphs. Also, the solutions to governing equations for slow steady motion of a fluid have been obtained numerically and compared with the existing analytical results and are found to be in excellent agreement. The results of the present study will hopefully enable a better understanding applications of the flow under consideration.

Purpose This paper aims to deal with the study of heat and mass transfer on double-diffusive three-dimensional hydromagnetic boundary layer flow of an electrically conducting Casson nanofluid over a stretching surface. The combined effects of nonlinear thermal radiation, magnetic field, buoyancy forces, thermophoresis and Brownian motion are taken into consideration with convective boundary conditions. Design/methodology/approach Similarity transformations are used to reduce the governing partial differential equations into a set of nonlinear ordinary differential equations. The reduced equations were numerically solved using Runge–Kutta–Fehlberg fourth-fifth-order method along with shooting technique. Findings The impact of several existing physical parameters such as Casson parameter, mixed convection parameter, regular buoyancy ratio parameter, radiation parameter, Brownian motion parameter, thermophoresis parameter, temperature ratio parameter on velocity, temperature, solutal and nanofluid concentration profiles are analyzed through graphs and tables in detail. It is found that the solutal component increases for Dufour Lewis number, whereas it decreases for nanofluid Lewis number. Moreover, velocity profiles decrease for Casson parameter, while the Nusselt number increases for Biot number, radiation and temperature ratio parameter. Originality/value This paper is a new work related to three-dimensional double-diffusive flow of Casson nanofluid with buoyancy and nonlinear thermal radiation effect.

The current investigation deals with melting heat transport in hyperbolic tangent fluid past a stretching sheet with fluid particle suspension and thermal radiation. Numerical solution is obtained via shooting technique after the applying of similarity variables to the governing partial equations. The effects of key parameters like magnetic parameter, fluid particle interaction parameter, Eckert number, Prandtl number, Weissenberg number and melting parameter are analyzed and discussed in detail with help of graphs and tables. Finally, the numerical values of the friction co-efficient and local Nusselt number are tabulated. Checked our results with existing work found excellent agreement. Results reveals that in the presence of melting parameter, the higher values of $W_e$ and $n$ depreciates the rate of heat transfer.

Characteristics of heat transport mechanism in three-dimensional ferrofluid flow past a deformed surface subjected to the Coriolis and Lorentz forces are analyzed. The impacts of Joule heating, nonlinear thermal radiation, viscous dissipation and convective condition are also accounted. The carrier fluid (water) is embedded by Fe 3 O 4 nanoparticles. The boundary layer approximations are employed in problem statement. Stretching transformations are utilized to form nonlinear ODE system from governed PDE system. The subsequent system is treated numerically via Runge-Kutta-Fehlberg method. Effects of relevant parameters on different flow fields are discussed comprehensively with help of graphs. It is established that the heat transfer rate is enhanced due to Coriolis and Lorentz forces. Furthermore, Fe 3 O 4 nanoparticles enhance the Nusselt number significantly in comparison with Al 2 O 3 nanoparticles.

An analysis is presented to investigate the unsteady magnetohydrodynamic (MHD) mixed convection boundary-layer flow of a micropolar fluid over a vertical wedge in the presence of thermal radiation and heat generation or absorption. The free-stream velocity and surface temperature are assumed to be oscillating in magnitude but not in the direction of the oncoming flow velocity. The governing equations have been solved by two distinct methods, namely, the finite difference method for the entire frequency range, and the series solution for low frequency range and the asymptotic series expansion method for the high frequency range. Numerical solutions provide a good agreement with the series solutions. The amplitudes of skin friction and couple stress coefficients are found to be strongly dependent on the Richardson number and the vortex viscosity parameter. The Prandtl number, the conduction-radiation parameter, the surface temperature parameter and the pressure gradient parameter significantly affect the amplitudes of skin friction, couple stress and surface heat transfer rates. However, the amplitudes of skin friction coefficient are considerably affected by the magnetic field parameter, whereas the amplitudes of heat transfer rate are appreciably changed with the heat generation or absorption parameter. In addition, results are presented for the transient skin friction, couple stress and heat transfer rate with the variations of the Richardson number, the vortex viscosity parameter, the pressure gradient parameter and the magnetic field parameter.

The effect of non-linear convection in a laminar three-dimensional Oldroyd-B fluid flow is addressed. The heat transfer phenomenon is explored by considering the non-linear thermal radiation and heat generation/absorption. The boundary layer assumptions are taken into account to govern the mathematical model of the flow analysis. Some suitable similarity variables are introduced to transform the partial differential equations into ordinary differential systems. The Runge-Kutta-Fehlberg fourth- and fifth-order techniques with the shooting method are used to obtain the solutions of the dimensionless velocities and temperature. The effects of various physical parameters on the fluid velocities and temperature are plotted and examined. A comparison with the exact and homotopy perturbation solutions is made for the viscous fluid case, and an excellent match is noted. The numerical values of the wall shear stresses and the heat transfer rate at the wall are tabulated and investigated. The enhancement in the values of the Deborah number shows a reverse behavior on the liquid velocities. The results show that the temperature and the thermal boundary layer are reduced when the non-linear convection parameter increases. The values of the Nusselt number are higher in the non-linear radiation situation than those in the linear radiation situation.

An unsteady magnetohydromagnetic natural convection on the Couette flow of electrically conducting water at 4°C (Pr = 11.40) in a rotating system has been considered. A Finite Element Method (FEM) was employed to find the numerical solutions of the dimensionless governing coupled boundary layer partial differential equations. The primary velocity, secondary velocity and temperature of water at 4°C as well as shear stresses and rate of heat transfer have been obtained for both ramped temperature and isothermal plates. The results are independent of the mesh (grid) size and the present numerical solutions through the Finite Element Method (FEM) are in good agreement with the existing analytical solutions by the Laplace Transform Technique (LTT). These are shown in tabular and graphical forms.

The current study compacts with effect of nonlinear convection and radiation on tangent hyperbolic fluid flow of through a convectively heated vertical surface. The converted set of boundary layer equations are solved numerically by Runge-Kutta-Fehlberg method. The effect of various pertinent parameters on flow and heat transfer characteristics are discussed with tabulated numerical values and deliberate figures. Additionally, the skin friction coefficient and Nusselt number are also presented. We noticed that, the skin friction factor and heat transfer rates are higher in presence of nonlinear convection than its absence. Further, velocity profile decreases by increasing power law index but establishes opposite results for skin friction. Keywords: Tangent hyperbolic fluid, Nonlinear convection, Nonlinear thermal radiation, Heat source, Numerical solution

In this study, the problem of heat transfer in the transport phenomenon of water conveying molybdenum disulphide nanoparticles is presented. The flow takes place over a flat plate along with nonlinear thermal radiation, viscous dissipation and variable viscosity influence. The governing model is simplified as ordinary differential equations with the help of bunch of similarity transformations. Simplified model is treated numerically using Runge–Kutta–Fehlberg fourth fifth order technique for the solution. The influence of related parameters and their physical resultant interpretations are presented and discussed in detail. It is found that, the heat transfer augmentation is more for cylinder shape nanoparticle than brick shape. Moreover, it is obtained that, heat transfer phenomena is more significant for nonlinear thermal radiation. Furthermore, enhancement of heat transfer rate is seen due to the impact of viscous dissipation and temperature ratio parameter.

Numerical solutions of three-dimensional flow over a non-linear stretching surface are developed in this article. An electrically conducting flow of viscous nanoliquid is considered. Heat transfer phenomenon is accounted under thermal radiation, Joule heating and viscous dissipation effects. We considered the variable heat flux condition at the surface of sheet. The governing mathematical equations are reduced to nonlinear ordinary differential systems through suitable dimensionless variables. A well-known shooting technique is implemented to obtain the results of dimensionless velocities and temperature. The obtained results are plotted for multiple values of pertinent parameters to discuss the salient features of these parameters on fluid velocity and temperature. The expressions of skin-friction coefficient and Nusselt number are computed and analyzed comprehensively through numerical values. A comparison of present results with the previous results in absence of nanoparticle volume fraction, mixed convection and magnetic field is computed and an excellent agreement noticed. We also computed the results for both linear and non-linear stretching sheet cases.

The longitudinal dispersion of a solute between two parallel plates filled with two immiscible electrically conducting fluids is analyzed using Taylor’s model. The fluids in both the regions are incompressible and the transport properties are assumed to be constant. The channel walls are assumed to be electrically insulating. Separate solutions are matched at the interface using suitable matching conditions. The flow is accompanied by an irreversible first-order chemical reaction. The effects of the viscosity ratio, pressure gradient and Hartman number on the effective Taylor dispersion coefficient and volumetric flow rate for an open and short circuit are drawn in the absence and in the presence of chemical reactions. As the Hartman number increases the effective Taylor diffusion coefficient decreases for both open and short circuits. When the magnetic field remains constant, the numerical results show that for homogeneous and heterogeneous reactions, the effective Taylor diffusion coefficient decreases with an increase in the reaction rate constant for both open and short circuits.

Purpose – The purpose of this paper is to numerically solve the problem of an unsteady squeezing three-dimensional flow and heat transfer of a nanofluid in rotating vertical channel of stretching left plane. The fluid is assumed to be Newtonian, incompressible and electrically conducting embedded with nanoparticles. Effect of internal heat generation/ absorption is also considered in energy equation. Four different types of nanoparticles are considered, namely, copper (Cu), alumina (Al2O3), silver (Ag) and titanium oxide (TiO2) with the base fluid as water. Maxwell-Garnetts and Brinkman models are, respectively, employed to calculate the effective thermal conductivity and viscosity of the nanofluid. Design/methodology/approach – Using suitable similarity transformations, the governing partial differential equations are transformed into set of ordinary differential equations. Resultant equations have been solved numerically using Runge-Kutta-Fehlberg fourth fifth order method for different values of the governing parameters. Effects of pertinent parameters on normal, axial and tangential components of velocity and temperature distributions are presented through graphs and discussed in detail. Further, effects of nanoparticle volume fraction, squeezing parameter, suction/injection parameter and heat source/sink parameter on skin friction and local Nusselt number profiles for different nanoparticles are presented in tables and analyzed. Findings – Squeezing effect enhances the temperature field and consequently reduces the heat transfer rate. Large values of mixed convection parameter showed a significant effect on velocity components. Also, in many heat transfer applications, nanofluids are potentially useful because of their novel properties. They exhibit high-thermal conductivity compared to the base fluids. Further, squeezing and rotation effects are desirable in control the heat transfer. Originality/value – Three-dimensional mixed convection flows over in rotating vertical channel filled with nanofluid are very rare in the literature. Mixed convection squeezing three-dimensional flow in a rotating channel filled with nanofluid is first time investigated.

Heat transfer with natural convection and radiation effect on a fully wet porous radial fin is considered. The radial velocity of the buoyancy driven flow at any radial location is obtained by applying Darcy’s law. The obtained non-dimensionalized ordinary differential equation involving three highly nonlinear terms is solved numerically with the spectral collocation method. In this approach, the dimensionless temperature is approximated by Chebyshev polynomials and discretized by Chebyshev-Gausse-Lobatto collocation points. A particular algorithm is used to reduce the nonlinearity of the conservation of energy equation. The present analysis characterizes the effect of ambient temperature in different ways and it provides a better picture regarding the effect of ambient temperature on the thermal performance of the fin. The profiles for temperature distributions and dimensionless base heat flow are obtained for different parameters which influence the heat transfer rate.

Self-similar steady natural convection thermal boundary layer flow from a rotating vertical cone to anisotropic Darcian porous medium is investigated theoretically and numerically. The transformed non-dimensional two-point boundary value problem is reduced to a system of coupled, highly nonlinear ordinary differential equations, which are solved subject to robust surface and free stream boundary conditions with the MAPLE 17 numerical quadrature software. Validation with earlier non-rotating studies is included, and also further verification of rotating solutions is achieved with a variational finite element method (FEM). The rotational (spin) parameter emerges as an inverse function of the Grashof number. The influence of this parameter, primary Darcy number, secondary Darcy number and Prandtl number on tangential velocity and swirl velocity, temperature and heat transfer rate are studied in detail. It is found that the dimensionless tangential velocity increases whilst the dimensionless swirl velocity and temperature decrease with the swirl Darcy number, tangential Darcy number and the rotational parameters. The model finds applications in chemical engineering filtration processing, liquid coating and spinning cone distillation columns.