Search

With increasing globalisation, various diets from around the world are readily available in global cities. This study aimed to verify if multiethnic dietary habits destabilised the gut microbiome in response to frequent changes, leading to readily colonisation of exogenous microbes. This may have health implications. We profiled Singapore young adults of different ethnicities for dietary habits, faecal type, gut microbiome and cytokine levels. Subjects were challenged with Lactobacillus casei, and corresponding changes in microbiome and cytokines were evaluated. Here, we found that the majority of young adults had normal stool types (73% Bristol Scale Types 3 and 4) and faecal microbiome categorised into three clusters, irrespective of race and gender. Cluster 1 was dominated by Bacteroides, Cluster 2 by Prevotella, while Cluster 3 showed a marginal increase in Blautia, Ruminococaceae and Ruminococcus, without a predominant microbiota. These youngsters in the three faecal microbiome clusters preferred Western high sugary beverages, Southeast Asian plant-rich diet and Asian/Western diets in rotation, respectively. Multiethnic dietary habits (Cluster 3) led to a gut microbiome without predominant microbiota yet demonstrated colonisation resistance to Lactobacillus. Although Bacteroides and Prevotella are reported to be health-promoting but also risk factors for some illnesses, Singapore-style dietary rotation habits may alleviate Bacteroides and Prevotella associated ill effects. Different immunological outcome was observed during consumption of the lactobacilli among the three microbiome clusters.

Gene editing in the brain has been challenging because of the restricted transport imposed by the blood-brain barrier (BBB). Current approaches mainly rely on local injection to bypass the BBB. However, such administration is highly invasive and not amenable to treating certain delicate regions of the brain. We demonstrate a safe and effective gene editing technique by using focused ultrasound (FUS) to transiently open the BBB for the transport of intravenously delivered CRISPR/Cas9 machinery to the brain.

Effective delivery of the CRISPR-Cas9 components is crucial to realizing the therapeutic potential. Although many delivery approaches have been developed for this application, oral delivery has not been explored due to the degradative nature of the gastrointestinal tract. For this issue, we developed a series of novel phenylboronic acid (PBA)-functionalized chitosan-polyethylenimine (CS-PEI) polymers for oral CRISPR delivery. PBA functionalization equipped the polyplex with higher stability, smooth transport across the mucus, and efficient endosomal escape and cytosolic unpackaging in the cells. From a library of 12 PBA-functionalized CS-PEI polyplexes, we identified a formulation that showed the most effective penetration in the intestinal mucosa after oral gavage to mice. The optimized formulation performed feasible CRISPR-mediated downregulation of the target protein and reduction in the downstream cholesterol. As the first oral CRISPR carrier, this study suggests the potential of addressing the needs of both local and systemic editing in a patient-compliant manner.

Photothermal therapy (PTT) is an effective treatment modality that is highly selective for tumor suppression and is a hopeful alternative to traditional cancer therapy. However, PTT-induced inflammatory responses may result in undesirable side effects including increased risks of tumor recurrence and metastasis. Here we developed multifunctional MnO nanoparticles as scavengers of proinflammatory molecules to alleviate the PTT-induced inflammatory response. The MnO nanoparticles improve the PTT therapy by (1) binding and scavenging proinflammatory molecules to inhibit the proinflammatory molecule-induced Toll-like receptors (TLR) activation and nuclear factor kappa B (NF-κB) signaling; (2) inhibiting activated macrophage-induced macrophage recruitment; and (3) inhibiting tumor cell migration and invasion. In vivo experimental results showed that further treatment with MnO nanoparticles after laser therapy not only inhibited the PTT-induced inflammatory response and primary tumor recurrence but also significantly reduced tumor metastasis due to the scavenging activity. These findings suggest that MnO nanoparticles hold the potential for mitigating the therapy-induced severe inflammatory response and inhibiting tumor recurrence and metastasis.

Periodontitis is a common type of inflammatory bone loss and a risk factor for systemic diseases. The pathogenesis of periodontitis involves inflammatory dysregulation, which represents a target for new therapeutic strategies to treat periodontitis. After establishing the correlation of cell-free DNA (cfDNA) level with periodontitis in patient samples, we test the hypothesis that the cfDNA-scavenging approach will benefit periodontitis treatment. We create a nanoparticulate cfDNA scavenger specific for periodontitis by coating selenium-doped hydroxyapatite nanoparticles (SeHANs) with cationic polyamidoamine dendrimers (PAMAM-G3), namely G3@SeHANs, and compare the activities of G3@SeHANs with those of soluble PAMAM-G3 polymer. Both G3@SeHANs and PAMAM-G3 inhibit periodontitis-related proinflammation in vitro by scavenging cfDNA and alleviate inflammatory bone loss in a mouse model of ligature-induced periodontitis. G3@SeHANs also regulate the mononuclear phagocyte system in a periodontitis environment, promoting the M2 over the M1 macrophage phenotype. G3@SeHANs show greater therapeutic effects than PAMAM-G3 in reducing proinflammation and alveolar bone loss in vivo. Our findings demonstrate the importance of cfDNA in periodontitis and the potential for using hydroxyapatite-based nanoparticulate cfDNA scavengers to ameliorate periodontitis., (© 2022. The Author(s).)

Oncogenic mutations in the RAS family of small GTPases are commonly found in human cancers and they promote tumorigenesis by altering gene expression networks. We previously demonstrated that Casein Kinase 1α (CK1α), a member of the CK1 family of serine/threonine kinases, is post-transcriptionally upregulated by oncogenic RAS signaling. Here, we report that the CK1α mRNA contains an exceptionally long 5'-untranslated region (UTR) harbouring several translational control elements, implicating its involvement in translational regulation. We demonstrate that the CK1α 5'-UTR functions as an IRES element in HCT-116 colon cancer cells to promote cap-independent translation. Using tobramycin-affinity RNA-pulldown assays coupled with identification via mass spectrometry, we identified several CK1α 5'-UTR-binding proteins, including SFPQ. We show that RNA interference targeting SFPQ reduced CK1α protein abundance and partially blocked RAS-mutant colon cancer cell growth. Importantly, transcript and protein levels of SFPQ and other CK1α 5'-UTR-associated RNA-binding proteins (RBPs) are found to be elevated in early stages of RAS-mutant cancers, including colorectal and lung adenocarcinoma. Taken together, our study uncovers a previously unappreciated role of RBPs in promoting RAS-mutant cancer cell growth and their potential to serve as promising biomarkers as well as tractable therapeutic targets in cancers driven by oncogenic RAS., (© The Author(s) 2022. Published by Oxford University Press on behalf of NAR Cancer.)

Circulating cell-free DNA (cfDNA) released by damaged cells causes inflammation and has been associated with the progression of sepsis. One proposed strategy to treat sepsis is to scavenge this inflammatory circulating cfDNA. Here, we develop a cfDNA-scavenging nanoparticle (NP) that consists of cationic polyethylenimine (PEI) of different molecular weight grafted to zeolitic imidazolate framework-8 (PEI- g -ZIF) in a simple one-pot process. PEI -g- ZIF NPs fabricated using PEI 1800 and PEI 25k but not PEI 600 suppressed cfDNA-induced TLR activation and subsequent nuclear factor kappa B pathway activity. PEI 1800- g -ZIF NPs showed greater inhibition of cfDNA-associated inflammation and multiple organ injury than naked PEI 1800 (lacking ZIF), and had greater therapeutic efficacy in treating sepsis. These results indicate that PEI -g- ZIF NPs acts as a "nanotrap" that improves upon naked PEI in scavenging circulating cfDNA, reducing inflammation, and reversing the progression of sepsis, thus providing a novel strategy for sepsis treatment.

For patients carrying BRCA1 mutations, at least one-third develop triple negative breast cancer (TNBC). Not only is TNBC difficult to treat due to the lack of molecular target receptors, but BRCA1 mutations (BRCA1m) also result in chemotherapeutic resistance, making disease recurrence more likely. Although BRCA1m are highly heterogeneous and therefore difficult to target, BRCA1 gene's synthetic lethal pair, PARP1 , is conserved in BRCA1m cancer cells. Therefore, we hypothesize that targeting PARP1 might be a fruitful direction to sensitize BRCA1m cancer cells to chemotherapy. We used CRISPR/Cas9 technology to generate PARP1 deficiency in two TNBC cell lines, MDA-MB-231 ( BRCA1 wild-type) and MDA-MB-436 (BRCA1m). We explored whether this PARP1 disruption (PARP1m) could significantly lower the chemotherapeutic dose necessary to achieve therapeutic efficacy in both a 2D and 3D tumor-on-a-chip model. With both BRCA1m and PARP1m, the TNBC cells were more sensitive to three representative chemotherapeutic breast cancer drugs, doxorubicin, gemcitabine and docetaxel, compared with the PARP1 wild-type counterpart in the 2D culture environment. However, PARP1m did not result in this synergy in the 3D tumor-on-a-chip model, suggesting that drug dosing in the tumor microenvironment may influence the synergy. Taken together, our results highlight a discrepancy in the efficacy of the combination of PARP1 inhibition and chemotherapy for TNBC treatment, which should be clarified to justify further clinical testing., (© 2020 The Authors. Bioengineering & Translational Medicine published by Wiley Periodicals, Inc. on behalf of The American Institute of Chemical Engineers.)

Mesenchymal stem cell (MSC) has been increasingly applied to cancer therapy because of its tumor-tropic capability. However, short retention at target tissue and limited payload option hinder the progress of MSC-based cancer therapy. Herein, we proposed a hybrid spheroid/nanomedicine system, comprising MSC spheroid entrapping drug-loaded nanocomposite, to address these limitations. Spheroid formulation enhanced MSC's tumor tropism and facilitated loading of different types of therapeutic payloads. This system acted as an active drug delivery platform seeking and specifically targeting glioblastoma cells. It enabled effective delivery of combinational protein and chemotherapeutic drugs by engineered MSC and nanocomposite, respectively. In an in vivo migration model, the hybrid spheroid showed higher nanocomposite retention in the tumor tissue compared with the single MSC approach, leading to enhanced tumor inhibition in a heterotopic glioblastoma murine model. Taken together, this system integrates the merits of cell- and nanoparticle- mediated drug delivery with the tumor-homing characteristics of MSC to advance targeted combinational cancer therapy.

Near-infrared (NIR) fluorescent probes offer advantages of high photon penetration, reduced light scattering and minimal autofluorescence from living tissues, rendering them valuable for noninvasive mapping of molecular events, assessment of therapeutic efficacy, and monitoring of disease progression in animal models. This review provides an overview of the recent development of the design and optical property of the different classes of NIR fluorescent nanoprobes associated with in vivo imaging applications.

Living tissues consist of groups of cells organized in a controlled manner to perform a specific function. Spatial distribution of cells within a three-dimensional matrix is critical for the success of any tissue-engineering construct. Fibers endowed with cell-encapsulation capability would facilitate the achievement of this objective. Here we report the synthesis of a cell-encapsulated fibrous scaffold by interfacial polyelectrolyte complexation (IPC) of methylated collagen and a synthetic terpolymer. The collagen component was well distributed in the fiber, which had a mean ultimate tensile strength of 244.6+/-43.0 MPa. Cultured in proliferating medium, human mesenchymal stem cells (hMSCs) encapsulated in the fibers showed higher proliferation rate than those seeded on the scaffold. Gene expression analysis revealed the maintenance of multipotency for both encapsulated and seeded samples up to 7 days as evidenced by Sox 9, CBFA-1, AFP, PPARgamma2, nestin, GFAP, collagen I, osteopontin and osteonectin genes. Beyond that, seeded hMSCs started to express neuronal-specific genes such as aggrecan and MAP2. The study demonstrates the appeal of IPC for scaffold design in general and the promise of collagen-based hybrid fibers for tissue engineering in particular. It lays the foundation for building fibrous scaffold that permits 3D spatial cellular organization and multi-cellular tissue development.

We have designed a novel dual-functional electrospun fibrous scaffold comprising two fiber mesh layers that were modified differently to induce two separate biological responses from hepatocytes. The first fiber layer was galactosylated on the surface to mediate hepatocyte attachment, while the second layer was loaded with 3-methylcholanthrene (3-Mc) to enhance cytochrome P450 activity of hepatocytes. Primary rat hepatocytes cultured on the galactosylated fibrous scaffolds loaded with different concentrations of 3-Mc were compared for their cell attachment efficiency, albumin secretion activity and cytochrome P450-dependent 7-ethoxycoumarin O-deethylase activity. This hybrid fibrous scaffold mediated hepatocyte attachment with slightly lower efficiency (76+/-2.3%) than a single-layer galactosylated fibrous scaffold (84+/-3.5%). More importantly, the cytochrome P450 activity of the hepatocytes cultured on the hybrid scaffold correlated well with the 3-Mc loading level. The results also showed that transfer of 3-Mc to hepatocytes through direct cell-fiber contact was the dominant transport route, with the induced cytochrome P450 activity being 1.9- to 4.8-fold higher than that of transfer of 3-Mc to hepatocytes via dissolution from fibers to medium. This study demonstrates the feasibility of creating multi-functional fibrous scaffolds that serve both as an adhesive substrate and as a delivery vehicle for bioactive molecules.

The bicontinuous microemulsions consisting of a polymerisable zwitterionic surfactant 3-((11-acryloyloxyundecyl)imidazolyl) propyl sulfonate (AIPS) and other monomers can be cross-polymerised to form good proton conductive membranes.

Tissue engineering involves ex vivo seeding of anchorage-dependent mammalian cells onto scaffolds, or transplanting cells in vivo. The cell expansion currently requires repeated cell detachment from solid substrata by enzymatic, chemical or mechanical means. The report here presents a high yield three-dimensional culture and harvest system circumventing the conventional detachment requirements. Cells mixed with dilute cationic collagen were microencapsulated within an ultra-thin shell of synthetic polymers. The cationic collagen could rapidly form a conformal layer of collagen fibers around cells to support cell proliferation and functions. The collagen could be readily removed from cells with a buffer rinse after harvesting from the fragile microcapsules. The cells harvested from this system demonstrate improved attachment, morphology and functions over conventionally cultured cells, upon binding to ligand-conjugated polymer surfaces. The harvested cells can be re-encapsulated and allowed to proliferate again, or used immediately in applications.

A new class of microcapsules was prepared under physiological conditions by polyelectrolyte complexation between two oppositely-charged, water-soluble polymers. The microcapsules consisted of an inner core of half N-acetylated chitosan and an outer shell of methacrylic acid (MAA) (20.4%)-hydroxyethyl methacrylate (HEMA) (27.4%)-methyl methacrylate (MMA) (52.2%) (MAA-HEMA-MMA) terpolymer. Both 400 and 150 kDa half N-acetylated chitosans maintained good water solubility and supplied enough protonated amino groups to coacervate with terpolymer at pH 7.0-7.4, in contrast to other chitosan-based microcapsules which must be prepared at pH <6.5. The viscosity of half N-acetylated chitosan solutions between 80 and 3000 cPas allowed the formation of microcapsules with spherical shape. Molar mass, pH and concentration of half N-acetylated chitosan, and reaction time, influenced the morphology, thickness and porosity of the microcapsules. Microcapsules formed with high concentration of half N-acetylated chitosan exhibited improved mechanical stability, whereas microcapsules formed with low concentration of half N-acetylated chitosan exhibited good permeability. This 3D microenvironment has been configured to cultivate sensitive anchorage-dependent cells such as hepatocytes to maintain high level of functions.

Collagen methylation has been exploited in various applications involving living cells. We have observed correlation between the collagen methylation with the rate of cell proliferation in three-dimensional (3-D) microenvironment. To quantify the degree of collagen methylation, we have developed a capillary zone electrophoresis method. Using a polyvinyl alcohol-coated fused-silica capillary and UV detection at 200 nm, we have optimized pH and separated the native collagen into three major bands in phosphate buffer (50 mM, pH 2.5) with 0.05% hydroxypropylmethylcellulose. Under these conditions, the methylated collagens were separated into four major bands, which changed with different methylation reaction conditions. We propose an index to quantify the degree of collagen methylation that also correlates with their effects on cell proliferation.

New anionic polyelectrolyte tetra-copolymers with photo-crosslinkable 4-(4-methoxycinnamoyl)phenyl methacrylate monomer in addition to a HEMA-MMA-MAA ter-copolymer system were synthesized. The tetra-copolymers were used to form photo-crosslinkable microcapsules with modified collagen by complex coacervation for rat hepatocytes encapsulation. The hepatocytes were encapsulated within a two-layered membrane comprising of modified collagen as the inner core and an outer photo-crosslinkable copolymer shell. Upon photo-crosslinking of the microcapsules with UV-Vis light irradiation, the mechanical strength and chemical stability of the microcapsules, and the cellular functions of the encapsulated hepatocytes were enhanced. Particularly, the mechanical stability of the microcapsules was dramatically strengthened. The new photo-crosslinkable tetra-copolymer formulation described in this article has opened a way to the development of hepatocyte microencapsulation technology for bioartifical liver assist device.

Bio-artificial livers (BAL) with microencapsulated hepatocytes have the typical limitations in maintaining hepatocyte functions, mechanical stability and uniform perfusion in packed or fluidized-bed bioreactors. We have previously developed microcapsules with enhanced hepatocyte functions. Here we have introduced a fibrin network inside microcapsules by (1) mixing collagen and fibrinogen with the encapsulated hepatocytes to support the cells; (2) submerging the microcapsules into a thrombin solution to induce the formation of an insoluble fibrin network inside the microcapsules. Fracture analysis on the microcapsules revealed significant improvement in mechanical stability. We have also introduced different amounts of gold nano-particles into microcapsules to achieve different densities for uniform bioreactor perfusion. These gold nano-particles also improved the mechanical stability of the microcapsules. Both the fibrin network and gold nano-particles exhibited the additional benefits of enhancing certain bio-functions of the encapsulated hepatocytes. The applications of these improved microcapsules in the development of bio-artificial livers are discussed.

Nanosized polystyrene (PS) latexes stabilized by the mixture of cationic/cationic, anionic/anionic, or anionic/cationic surfactants of various types with high weight ratios of PS to surfactant (ca. 10:1) have been successfully synthesized by a semicontinuous microemulsion polymerization process. For cationic or anionic systems, spherical latex particles with a weight-averaged diameter (Dw) ranging from about 22 to 53 nm were nearly linearly dependent on the weight ratio of the mixed surfactants with similar charges. Their particle size distributions were rather uniform (Dw/Dn < 1.20). For a system with oppositely charged surfactants at nonequimolar ratios, it could produce stable PS particles up to 94 nm in diameter. High molar masses (Mw) of PS ranging from 1.1 to 1.9 x 10(6) g/mol could easily be obtained for all three systems investigated. For both cationic/cationic and anionic/anionic surfactant systems, the number of PS particles per milliliter of latex (Np) generated in the very early stage of O/W' microemulsion remained rather constant throughout the polymerization. This was controlled by using only 1 wt% of mixed surfactants and the continuous addition of a small amount of styrene. The present polymerization method allows one to synthesize nanoparticles of PS or other polymers of high polymer/surfactant weight ratios at some particle sizes that are unable to achieve them with a single type of surfactant.

We previously encapsulated hepatocytes in ultrathin shell microcapsules and showed them to have enhanced differentiated functions over cells cultured in monolayer. Here we have used these microencapsulated hepatocytes in a bioartificial liver-assisted device (BLAD) with a rat hepatectomy model. Primary rat hepatocytes were encapsulated in 150- to 200-microm microcapsules, using an electrostatic droplet generator. The microencapsulated hepatocytes exhibited good in vitro urea synthesis activity in plasma from rats with fulminant hepatic failure (FHF). The ex vivo hemoperfusion was conducted in FHF rats by perfusing plasma at a rate of 1-2 mL/min through 1.5-2 x 10(8) encapsulated hepatocytes packed into a packed-bed bioreactor. Hemoperfusion with the bioreactor was initiated 5 h after operative induction of liver failure and continued for 7 h. The BLAD-treated rats showed improvements over the control groups in survival time and metabolic indicators, including ammonia and total bilirubin levels. Furthermore, expanded bed adsorption (EBA) detoxification technology using Streamline-SP resin was explored to complement the bioreactor with microencapsulated hepatocytes. In vitro experiments indicated that serum ammonia could be specifically removed in dose-dependent manner, whereas the total serum proteins were unaffected by the resin. In ex vivo experiments, hemoperfusion with the resin was initiated 3 h after operative induction of liver failure and continued for 7 h. The resin-treated rats showed obvious serum ammonia removal with no observable total blood protein and blood cell adsorption. Therefore, Streamline-SP resin can potentially be integrated into a BLAD for improved efficacy.

A cogent understanding of the microstructure, and indeed nano-structure, of hydroxyapatite (HA) and the interface between Ti-6Al-4V and HA is crucial to its appropriateness as a biomaterials. This paper reports the analysis of plasma-sprayed HA/Ti-6Al-4V composites by transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) to elucidate the intricate nature of the materials following plasma spray processing and in vitro evaluation. The novel Ti-6Al-4V/HA composite coating, with approximately 48 wt% HA, had demonstrated attractive tensile adhesion strength (approximately 28 MPa) and improved Young's modulus (approximately 55 GPa). Experimental results demonstrated that amorphous calcium phosphate and fine HA grains were formed during rapid splat solidification in the as-sprayed composite coatings. Small Ti-6Al-4V grains were observed adjacent to the amorphous calcium phosphate. The coatings were further heat treated at 600 degrees C for 6 h, and significant crystallisation of the amorphous calcium phosphate phase took place. However, complete crystallisation was not achieved at this temperature, as the coatings invariably contained a small amount of amorphous calcium phosphate phase in some local regions. After immersion in simulated body fluid for 2 weeks and 10 weeks, TEM and STEM confirmed that the interfaces inside the coating maintained good microstructural integrity., (Copyright 2002 Elsevier Science Ltd.)

Mechanical stability, complete encapsulation, selective permeability, and suitable extra-cellular microenvironment, are the major considerations in designing microcapsules for cell encapsulation. We have developed four types of multi-layered microcapsules that allow selective optimization of these parameters. Primary hepatocytes were used as model cells to test these different microcapsule configurations. Type-1 microcapsules with an average diameter of 400 microm were formed by complexing modified collagen with a ter-polymer shell of 2-hydroxyethyl methylacrylate (HEMA), methacrylic acid (MAA) and methyl methacrylate (MMA), resulting in a capsule thickness of 2-5 microm. Cells in these microcapsules exhibited improved cellular functions over those cultured on collagen monolayers. Type-II microcapsules were formed by encapsulating the Type-I microcapsules in another 2-5 microm ter-polymer shell and a approximately 5 microm collagen layer between the two ter-polymer shells to ensure complete cell encapsulation. Type-II microcapsules comprised of a macro-porous exoskeleton with materials such as alumina sol-gel coated on the Type-I microcapsules. Nano-indendation assay indicated an improved mechanical stability over the Type-I microcapsules. Type-IV microcapsules were created by encapsulating Type-III microcapsules in another 2-5 microm ter-polymer shell, with the aim of imparting a negatively charged smooth surface to minimize plasma protein absorption and ensure complete cell encapsulation. The permeability for nutrient exchange, cellular functions in terms of urea production and mechanical stability of the microcapsules were characterized. The advantages and limitations of these microcapsules for tissue engineering are discussed.

Size-controlled uniform surface-capped CdS nanoparticles were readily prepared by an improved inverse microemulsion technique using hexanethiol as co-surfactant. The third-order optical nonlinearities were studied for the first time by newly-developed Z-scan technique, from which the enhanced nonlinear optical responses were observed after heat-treatment.