Search

Seaweeds are recognised as a potential eco-friendly food source. However, some species have shown the capacity to bioaccumulate many substances of diverse nature, such as inorganic nanoparticles (NPs), which may have potentially harmful effects on them. Among these NPs, silver nanoparticles (AgNPs) have been used to enhance the antifungal and antibacterial properties of the final consumer products, such as textiles and food packages. Their potential release into the aquatic environment raises significant concern, increasing the probability of interaction with aquatic biota, such as macroalgae. In this work, we investigated the differences in bioaccumulation, biodistribution, and transformation of NPs as a function of seaweed species. We selected polyvinylpyrrolidone-coated silver nanoparticles (PVP-AgNPs) as model NP since they remain colloidally stable in seawater, focusing the study only on single particles and not on aggregates. The study was conducted on two different seaweed species with high commercial interest and value as human food: the red seaweed Palmaria palmata and the green seaweed Ulva fenestrata. Single-particle inductively coupled plasma mass spectroscopy (spICP-MS) analysis showed high and similar bioaccumulation of PVP-AgNPs in both seaweeds, in the range of 10 9 NPs/g of seaweed. However, electron microscopy with energy-dispersive X-ray analysis demonstrated that their time-dependent distribution and transformation in the algal tissue, mainly dissolution and formation of sulfur-rich corona and/or sulfidation, highly depended on the seaweed type. These results indicate that special attention should be given to the presence and transformation of AgNPs in seaweeds intended for human consumption. Not only the dissolution degree but also the speciation of these NPs could heavily impact their bioaccessibility, bioavailability, biodistribution, and toxicity to humans after ingestion., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

The purpose of our study was to obtain new wound dressings in the form of hydrogels that promote wound healing taking advantage of the broad activities of elastin (ELT) in physiological processes. The hydrogel of ELT and polyvinylpyrrolidone (PVP; ELT-PVP) was obtained by cross-linking induced by gamma irradiation at a dose of 25 kGy. The physicochemical changes attributed to cross-linking were analyzed through scanning electron microscopy (SEM), infrared spectroscopy analysis with Fourier transform (FTIR), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Furthermore, we performed a rheological study to determine the possible changes in the fluidic macroscopic properties produced by the cross-linking method. Finally, we accomplished viability and proliferation analyses of human dermal fibroblasts in the presence of the hydrogel to evaluate its biological characteristics. The hydrogel exhibited a porous morphology, showing interconnected porous with an average pore size of 16 ± 8.42 µm. The analysis of FTIR, DSC, and TGA revealed changes in the chemical structure of the ELT-PVP hydrogel after the irradiation process. Also, the hydrogel exhibited a rheological behavior of a pseudoplastic and thixotropic fluid. The hydrogel was biocompatible, demonstrating high cell viability, whereas ELT presented low biocompatibility at high concentrations. In summary, the hydrogel obtained by gamma irradiation revealed the appropriate morphology to be applied as a wound dressing. Interestingly, the hydrogel exhibited a higher percentage of cell viability compared with ELT, suggesting that the cross-linking of ELT with PVP is a suitable strategy for biological applications of ELT without generating cellular damage.

Bacteria responsive color-changing wound dressings offer a valuable platform for continuous monitoring of the wound bed facilitating early detection of bacterial infections. In this study, we present a highly sensitive electrospun nanofibrous polyurethane wound dressing incorporating a hemicyanine-based chromogenic probe with a labile ester linkage that can be enzymatically cleaved by bacterial lipase released from clinically relevant strains, such as Pseudomonas aeruginosa and methicillin-resistant Staphylococcus aureus (MRSA). A rapid chromogenic response was achieved by localizing the dye at the surface of core-shell fibers, resulting in a 5x faster response relative to conventional nanofibers. By incorporating polyvinylpyrrolidone (PVP) dopant in the shell, the sensitivity was boosted to enable detection of bacteria at clinically relevant concentrations after 2 h exposure: 2.5 × 10 5 CFU/cm 2 P. aeruginosa and 1.0 × 10 6 CFU/cm 2 MRSA. Introduction of PVP in the shell also boosted the degree of hydrolysis of the chromogenic probe by a factor of 1.2× after a 3 h exposure to a low concentration of P. aeruginosa (10 5 CFU/cm 2 ). PVP was also found to improve the discernibility of the color change at high bacterial concentrations. The co-operativity between the chromogenic probe, fiber structure, and polymer composition is well-suited for timely in situ detection of wound infection.

Carcinostatic effects of combined use of hydrogen nano-bubbles (nano-H) and platinum-povidone (PVP--Pt) were examined. Hydrogen-dissolved medium was prepared by hydrogen-gas bubbling with a microporous gas-emittance-terminal into a medium in the absence or presence of PVP-Pt (nano-H, nano-H/PVP-Pt). Human esophagus-derived carcinoma cells KYSE70 were repressed for cell proliferation with nano-H/PVP-Pt more markedly than with nano-H, indicating the hydrogen-intensification for PVP-Pt-alone-carcinostasis. However, the intensified carcinostasis required co-administration of nano-H and PVP-Pt, and no intensified carcinostasis was shown in two-step separate administration of nano-H and PVP-Pt. Furthermore, hydrogen bubbling into PVP-Pt-containing medium achieved more appreciable carcinostasis than mere addition of PVP-Pt into nano-H-containing medium, indicating the potent interaction of hydrogen and PVP-Pt. The nano-H/PVP-Pt-administered human tongue-derived carcinoma cells HSC-4 were repressed for cell proliferation more markedly than pre-malignant human tongue-derived epitheliocytes DOK, concurrently with more abundant intracellular Pt-intake into HSC-4 cells than DOK as analyzed by ICP-MS. Thus, PVP-Pt is able to adsorb hydrogen nano-bubbles on Pt and applicable for cancer therapy by diminishing the side-effects to normal cells.

A novel ferricyanide/Prussian blue (PB) assay for total antioxidant capacity (TAC) determination was developed exploiting the formation of PB nanoparticles in the presence of polyvinylpyrrolidone (PVP) as stabilizer. This improved method, named as "nanoparticle-based ferricyanide/Prussian blue assay (PBNP)", was applied to the TAC measurement of Cynara Scolymus L. (globe artichoke). The calibration results of the novel (PBNP) method were compared with those of a similar nanoparticle PB method performed in the absence of PVP, and of a sodium dodecyl sulfate-modified and acid-optimized ferricyanide reference assay. Compared to similar common Fe(III)-based TAC assays, much higher molar absorptivities, pointing out higher response to different kinds of antioxidants, were obtained with PBNP for all tested antioxidants, and lower LOD and LOQ values were achieved for thiols. As an additional advantage, methionine, not responding to other electron-transfer based TAC reagents, could be measured. PBNP could detect various antioxidants with one-two orders-of-magnitude lower LOD values than those of widely used TAC assays like CUPRAC and Folin-Ciocalteau well correlating with the proposed assay., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Hydrogel-based multifunctional materials have attracted much attention. In this work, novel mineralized hydrogels were fabricated through physically cross-linked polyvinylpyrrolidone (PVP) and CaCO3. The mineralized hydrogels were prepared by simply mixing CaCl2, Na2CO3, and PVP in aqueous solutions. The CO32- induced the aggregation of the PVP chains and the CaCO3 particles in situ generated in the aqueous solution worked as fillers to strengthen the hydrogels. Based on this method, other kinds of mineralized hydrogels were prepared by replacing the Ca2+ with different metal ions. The mineralized hydrogels displayed shapeable, self-healing and thixotropic properties. Moreover, the mineralized hydrogel-based sensor showed good and stable sensitivity to compressive pressure, and could be used to monitor human actions. This work presents a facile method for preparing mineralized hydrogels, which are promising for various applications due to their outstanding properties.

This study evaluated the biodistribution and organ oxidative effects of silver nanoparticles (AgNPs) coated with/without polyvinylpyrrolidone (PVP) (AgNP-20 and AgNP-PVP) in mice; these were administered by gavage at a dose of 10-250 mg/kg body weight per day for 28 days. The results showed that both the AgNPs could induce subacute toxicity and oxidative damage to mice and were mainly accumulated in the liver and spleen and excreted by feces. AgNPs could be absorbed into blood and might cross the blood-brain barrier, and be distributed extensively in mice. The malondialdehyde content in the liver, lungs and kidneys increased in both AgNP groups, while the content of glutathione decreased, and the activity of superoxide dismutase increased at first and then decreased along with the increased doses. Inflammatory pathological changes in the lung and liver at high dose of both AgNPs were consistent with increases in glutamate pyruvic transaminase, glutamate oxaloacetic transaminase and the total protein in serum detection. The Ag content was detected in organs, with the highest content in the liver, followed by spleen, while the Ag content in feces was about 500 times higher than that in urine. AgNP-PVP could induce higher oxidative stress and subacute toxicity than AgNP-20 at the same dose, which might be related to the higher concentrations and more Ag + ions released in mice after AgNP-PVP exposure. The data from this research provided information on toxicity and biodistribution of AgNPs following gavage administration in mice, and might shed light for future application of AgNPs in daily life., (© 2020 John Wiley & Sons, Ltd.)

The isolation of mitochondria is gaining importance in experimental and clinical laboratory settings. The mitochondrion is known as the powerhouse of the cell as it produces the energy to power most cellular functions but is also involved in many cellular processes. Of interest, mitochondria and mitochondrial components ( i.e . circular DNA, N-formylated peptides, cardiolipin) have been involved in several human inflammatory pathologies, such as cancer, Alzheimer's disease, Parkinson's disease, and rheumatoid arthritis. Therefore, stringent methods of isolation and purification of mitochondria are of the utmost importance in assessing mitochondrial-related diseases. While several mitochondrial isolation methods have been previously published, these techniques are aimed at yielding mitochondria from cells types other than platelets. In addition, little information is known on the number of platelet-derived microparticles that can contaminate the mitochondrial preparation or even the overall quality and integrity of the mitochondria. In this project, we provide an alternate purification method yielding mitochondria of high purity and integrity from human platelets. Using human platelets, flow cytometry and transmission electron microscopy experiments were performed to demonstrate that the Percoll gradient method yielded significantly purified mitochondria by removing platelet membrane debris. Mitochondrial respiration following the substrate-uncoupler-inhibitor-titration (SUIT) protocol was similar in both the purified and crude mitochondrial extraction methods. Finally, the cytochrome c effect and JC-1 staining did not exhibit a significant difference between the two methods, suggesting that the mitochondrial integrity was not affected. Our study suggests that the Percoll discontinuous gradient purifies viable platelet-derived mitochondria by removing platelet-derived debris, including microparticles, therefore confirming that this isolation method is ideal for studying the downstream effects of intact mitochondria in mitochondrial-related diseases.

The purpose of this study was to research a novel combination of Plasdone-S630 and HPMCAS-HF as hot-melt carrier used in ziprasidone hydrochloride for enhanced oral bioavailability and dismissed food effect. Ziprasidone hydrochloride solid dispersion (ZH-SD) was prepared by hot-melt extrusion technique, and its optimized formulation was selected by the central composite design (CCD), which was characterized for powder X-ray diffraction (PXRD), fourier transform infrared spectroscopy (FTIR), in vitro dissolution study, and stability study. Finally, the in vivo study in fasted/fed state was carried out in beagle dogs. Based on PXRD analysis, HME technique successfully dispersed ziprasidone with a low crystallinity hydrochloride form in the polymers. According to the analysis of FTIR, hydrogen bonds were formed between drug and polymers during the process of HME. Without any noticeable bulk, crystalline could be found from the micrograph of ZH-SD when analyzed the result of scanning electron microscope (SEM). Pharmacokinetics studies indicated that the bioavailability of ZH-SD formulation had no significant difference in fasted and fed state, and the C max and AUC of ZH-SD were two fold higher than Zeldox® in fasted state. This result indicated that ziprasidone has achieved a desired oral bioavailability in fasted state and no food effect.

In-vitro permeation studies were conducted to assess the feasibility of fabricating dissolving-microneedle-array systems to release sumatriptan succinate. The formulations consisted mainly of the encapsulated active ingredient and a water-soluble biologically compatible polymer, polyvinylpyrrolidone (PVP), approved by the U.S. Food and Drug Administration (FDA). Tests with Franz-type diffusion cells and Göttingen minipig skins showed an increase of the transdermal flux compared to passive diffusion. A preparation, containing 30% by mass of PVP and 8.7mg sumatriptan, produced a delivery rate of 395±31μg/cm 2 h over a 7-hour period after a negligible lag time of approximately 39min. Theoretically, a 10.7cm 2 microneedle-array patch loaded with 118.8mg of the drug would provide the required plasma concentration, 72ng/mL, for nearly 7h., (Copyright © 2017 Elsevier B.V. All rights reserved.)

In the recent years, synthesis of nanomaterials using seaweeds and their diverse applications is escalating research in modern era. Among the noble metals, platinum nanoparticles (PtNPs) are of great importance owing to their catalytic property and less toxicity. The significance of this work is a simple one-step synthesis of PtNPs using aqueous extract of Indian brown seaweed Padina gymnospora and their catalytic activity with a polymer Polyvinylpyrrolidone (PVP) as PVP/PtNPs nanocomposite towards antimicrobial, haemolytic, cytotoxic (Artemia salina) and antioxidant properties. Fourier Transform Infrared (FT-IR) spectrum results showed diversified functional groups (biomoeities such as carbohydrates and proteins) present in the seaweed extract is responsible for the reduction of platinum ions (Pt + ) to PtNPs. The seaweed mediated PtNPs was characterized by UV-vis spectrophotometer, X-ray diffraction (XRD) pattern, Field Emission Scanning Electron Microscopy (FESEM) equipped with Energy Dispersive X-ray (EDX) spectroscopy and High Resolution Transmission Electron Microscopy (HRTEM) analysis. The synthesized PtNPs was found to be truncated octahedral in shape with the range of 5-50nm. Crystalline nature of the nanoparticles was evidenced by Selected Area Electron Diffraction (SAED) pattern with bright circular spots corresponding to (111), (200), (220) and (311) Bragg's reflection planes. The size of the PtNPs was further evidenced by Dynamic Light Scattering (DLS) analysis and it is originate to be stable at -22.5mV through Zeta Potential (ZP) analysis. The present study shows that the catalytic behavior of PtNPs as polymer/metal nanocomposite (PVP/PtNPs) preparation for an antibacterial activity against seven disease causing pathogenic bacterial strains with the maximum activity against Escherichia coli (15.6mm) followed by Lactococcus lactis (14.8mm) and Klebsiella pneumoniae (14.4mm). But no haemolytic activity was seen at their effective bactericidal concentration, whereas increase in the haeomyltic activity was seen only in higher concentrations (600, 900 and 1200μgmL -1 ). On the other hand, PVP/PtNPs nanocomposite has shown cytotoxic activity at 100±4μgmL -1 (LC 50 ) against Artemia salina nauplii. Furthermore, PVP/PtNPs nanocomposite showed an enhanced scavenging activity against 2,2-diphenyl-1-picrylhydrazyl (DPPH), superoxide, nitric oxide and hydroxyl radicals., (Copyright © 2017 Elsevier Masson SAS. All rights reserved.)

Sustained pulmonary drug delivery is regarded as an effective strategy for local treatment of chronic lung diseases. Despite of the progress made so far, there remains a need for respirable drug loaded porous microparticles, where porosity of the microparticles can be readily engineered during the preparation process, with tunable sustained drug release upon lung deposition. In this work, polyvinyl pyrrolidone (PVP) was used as a novel porogen to engineer PLGA-based large porous particles (LPPs) using single emulsion method, with fine tuning of the porosity, sustained drug release both in vitro and in vivo. Using cinaciguat as the model drug, influence of PVP content and PLGA type on the properties of the LPPs was characterized, including geometric particle size, drug encapsulation efficiency, tap density, theoretical and experimental aerodynamic particle size, specific surface area, morphology, and in vitro drug release. Solid state of cinaciguat in the LPPs was studied based on DSC and X-ray analysis. LPPs retention in the rat lung was carried out using bronchoalveolar lavage fluid method. Raw 264.7 macrophage cells were used for LPPs uptake study. Pharmacodynamic study was performed in mini-pigs in a well-established model of pulmonary arterial hypertension (thromboxane challenge). It was demonstrated that porosity of the LPPs is tunable via porogen content variation. Cinaciguat can be released from the LPP in a controlled manner for over 168h. Significant reduction of macrophage phagocytosis was presented for LPPs. Furthermore, LPPs was found to have extended retention time (~36h) in the rat lung and accordingly, sustained pharmacodynamics effect was achieved in mini-pig model. Taken together, our results demonstrated that this simple PLGA based LPPs engineering using single emulsion method with PVP as porogen may find extensive application for the pulmonary delivery of hydrophobic drugs to realize tunable sustained effect with good safety profile., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The preparation of liquisolid systems presents a promising and innovative possibility for enhancing dissolution profiles and improving the bioavailability of poorly soluble drugs. This study aims to evaluate the differences in the properties of liquisolid systems containing combinations of 3 commercially used superdisintegrants (sodium starch glycolate, crospovidone, and croscarmellose sodium). Multiple regression models and contour plots were used to study how the amount and the type of superdisintegrant used affected the quality parameters of liquisolid tablets. The results revealed that an increased amount of crospovidone in the mixture improves disintegration and wetting time and enhances drug release from the prepared liquisolid tablets. Moreover, it was observed that a binary blend of crospovidone and sodium starch glycolate improved tablet disintegration. Considering the obtained results, it could be stated that crospovidone showed the best properties to be used as superdisintegrant for the preparation of liquisolid systems containing rosuvastatin., (Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

Ochratoxin A (OTA) is a fungal metabolite and putative carcinogen which can contaminate a variety of foods such as cereals, wine, and nuts. Commercial ELISA kits are known to give false-positive results for OTA concentrations when phenolic compounds are present. Pistachios represent a food matrix rich in phenolic compounds potentially contaminated with OTA, and were used to model OTA cross-reactivity. Polyvinylpolypyrrolidone (PVPP) was incorporated during extraction of OTA using a commercial ELISA protocol. HPLC methods were used to confirm that PVPP does not interact with OTA and levels of gallic acid and catechin remaining in pistachio extracts decreased with increasing PVPP application. Cross-reactivity of extracts also decreased with increasing PVPP application, and color loss was used as an indicator of anthocyanin removal. Incorporating PVPP into ELISA protocols allows for the continued use of rapid immunological methods in food matrices containing phenolic compounds., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Developing a promising carrier for the delivery of poorly water-soluble drugs, such as silybin, to improve oral absorption has become a very worthy of consideration. The goal of this study was to prepare a novel porous calcium phosphate microparticle using povidone-mixed micelles as template while evaluating its in vitro and in vivo properties with silybin as a model drug. The particle characterization, in vitro drug release behavior, and pharmacokinetic parameters of the prepared silybin-loaded calcium phosphate microparticle were investigated. The mean particle size was found to be 3.54 ± 0.32 μm with a rough surface porous structure. Additionally, the silybin-loaded calcium phosphate microparticle compared with the free silybin showed a prolonged 72-h release in vitro and a higher C max (418.5 ± 23.7 ng mL(-1)) with 167.5% oral relative bioavailability. A level A in vitro-in vivo correlation (IVIVC), established for the first time, demonstrated an excellent IVIVC of the formulated silybin in oral administration. In conclusion, this povidone-mixed micelle-based microparticle was successfully prepared to enhance the oral bioavailability of silybin. Therefore, application of this novel porous calcium phosphate microparticle holds a significant potential for the development of poorly water-soluble drugs.

The saturation solubility of PVP:PZQ physical mixtures (PMs) and solid dispersions (SDs) prepared from ethanol (E/E) or ethanol/water (E/W) by the solvent evaporation method at 1:1, 2:1 and 3:1 ratio (w/w) was determined. The presence of PVP improves the solubility of PZQ (0.31±0.01mg/mL). A maximum of 1.29±0.03mg/mL of PZQ in solution was achieved for the 3:1 SD (E/E). The amount of PZQ in solution depends on the amount of polymer and on the preparation method. Solid-state NMR (ssNMR) and DSC were used to understand this behavior. Results show that PMs are a mixture of crystalline PZQ with the polymer, while SDs show different degrees of drug amorphization depending on the solvent used. For E/W SDs, PZQ exists in amorphous and crystalline states, with no clear correlation between the amount of crystalline PZQ and the amount of PVP. For E/E SDs, formulations with a higher percentage of PZQ are amorphous with the components miscible in domains larger than 3nm ((1)H ssNMR relaxation measurements). Albeit its higher saturation solubility, the 3:1 E/E PVP:PZQ sample has a significant crystalline content, probably due to the water introduced by the polymer. High PVP content and small crystal size account for this result., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Isosorbide dinitrate-polyvinylpyrrolidone (ISDN-PVP) electrospinning fibers were formulated and explored as potentially sublingual membrane. The addition of polyethylene glycol (PEG) to the formulation improved flexibility and reduced fluffiness of the fiber mat. The scanning electron microscopy (SEM) demonstrated that the fibers tended to be cross-linking, and the crosslinking degree increased with the increase of PEG amount. The differential scanning calorimetry (DSC) indicated that ISDN existed in non-crystalline state in the fibers (except at the highest drug content). The infrared spectroscopy suggested that ISDN had better compatibility with the ingredients owing to the hydrogen bonding (or hydrophobic interactions). The fibers were highly favorable for the fabrication of sublingual membrane due to neutral pH, large folding endurance and rapid drug release (complete dissolution within 120 s). The permeation study of ISDN through both dialysis membrane (DM) and porcine sublingual mucosa (SM) were carried out. A significant relationship of drug permeation rate through DM and SM was built up, which indicated that DM could be used to partly simulate SM and assess formulation. The pharmacokinetic study in rats demonstrated that the electrospinning fiber membrane had a higher Cmax and lower Tmax compared to the reference preparation, and the relative bioavailability of the fiber membrane was 151.6%.

Nanomaterials of various shapes and dimensions are widely used in the medical, chemical, and electronic industries. Multiple studies have reported the ecotoxicological effects of nanaoparticles when released in aquatic and terrestrial ecosystems; however, information on the toxicity of silver nanowires (AgNWs) to freshwater organisms and their transfer through the food webs is limited. In the present study, we aimed to evaluate the toxicity of 10- and 20-μm-long AgNWs to the alga Chlamydomonas reinhardtii, the water flea Daphnia magna, and the zebrafish and study their movement through this three-species food chain using a variety of qualitative and quantitative methods as well as optical techniques. We found that AgNWs directly inhibited the growth of algae and destroyed the digestive organs of water fleas. The results showed that longer AgNWs (20μm) were more toxic than shorter ones (10μm) to both algae and water fleas, but shorter AgNWs were accumulated more than longer ones in the body of the fish. Overall, this study suggests that AgNWs are transferred through food chains, and that they affect organisms at higher trophic levels, potentially including humans. Therefore, further studies that take into account environmental factors, food web complexity, and differences between nanomaterials are required to gain better understanding of the impact of nanomaterials on natural communities and human health., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Microneedle technology provides the opportunity for the delivery of DNA therapeutics by a non-invasive, patient acceptable route. To deliver DNA successfully requires consideration of both extra and intracellular biological barriers. In this study we present a novel two tier platform; i) a peptide delivery system, termed RALA, that is able to wrap the DNA into nanoparticles, protect the DNA from degradation, enter cells, disrupt endosomes and deliver the DNA to the nucleus of cells ii) a microneedle (MN) patch that will house the nanoparticles within the polymer matrix, breach the skin's stratum corneum barrier and dissolve upon contact with skin interstitial fluid thus releasing the nanoparticles into the skin. Our data demonstrates that the RALA is essential for preventing DNA degradation within the poly(vinylpyrrolidone) (PVP) polymer matrix. In fact the RALA/DNA nanoparticles (NPs) retained functionality when in the MN arrays after 28days and over a range of temperatures. Furthermore the physical strength and structure of the MNs was not compromised when loaded with the NPs. Finally we demonstrated the effectiveness of our MN-NP platform in vitro and in vivo, with systemic gene expression in highly vascularised regions. Taken together this 'smart-system' technology could be applied to a wide range of genetic therapies., (Copyright © 2016. Published by Elsevier B.V.)

Previous studies suggested that an amorphous solid dispersion with a copolymer consisting of both hydrophobic and hydrophilic monomers could improve the dissolution profile of a poorly water-soluble drug compared to the crystalline form. Therefore, this study investigated the influence of the copolymer composition of polyvinylpyrrolidone/vinyl acetate (PVP/VA) on the non-sink in vitro dissolution behavior and in vivo performance of celecoxib (CCX) amorphous solid dispersions. The study showed that the hydrophilic monomer vinylpyrrolidone (VP) was responsible for the generation of CCX supersaturation whereas the hydrophobic monomer vinyl acetate (VA) was responsible for the stabilization of the supersaturated solution. For CCX, there was an optimal copolymer composition around 50-60% VP content where further replacement of VP monomers with VA monomers did not have any biopharmaceutical advantages. A linear relationship was found between the in vitro AUC(0-4h) and in vivo AUC(0-24h) for the CCX:PVP/VA systems, indicating that the non-sink in vitro dissolution method applied in this study was useful in predicting the in vivo performance. These results indicated that when formulating a poorly water-soluble drug as an amorphous solid dispersion using a copolymer, the copolymer composition has a significant influence on the dissolution profile and in vivo performance. Thus, the dissolution profile of a drug can theoretically be tailored by changing the monomer ratio of a copolymer with respect to the required in vivo plasma-concentration profile. As this ratio is likely to be drug dependent, determining the optimal ratio between the hydrophilic (dissolution enhancing) and hydrophobic (crystallization inhibiting) monomers for a given drug is imperative.

Because of the aggressive and recurrent nature of cancers, repeated and multimodal treatments are often necessary. Traditional cancer therapies have a risk of serious toxicity and side effects. Hence, it is crucial to develop an alternative treatment modality that is minimally invasive, effectively treats cancers with low toxicity, and can be repeated as required. We developed a light-activatable microneedle (MN) system that can repeatedly and simultaneously provide photothermal therapy and chemotherapy to superficial tumors and exert synergistic anticancer effects. This system consists of embeddable polycaprolactone MNs containing a photosensitive nanomaterial (lanthanum hexaboride) and an anticancer drug (doxorubicin; DOX), and a dissolvable poly(vinyl alcohol)/polyvinylpyrrolidone supporting array patch. Because of this supporting array, the MNs can be completely inserted into the skin and embedded within the target tissue for locoregional cancer treatment. When exposed to near-infrared light, the embedded MN array uniformly heats the target tissue to induce a large thermal ablation area and then melts at 50 °C to release DOX in a broad area, thus destroying tumors. This light-activated heating and releasing behavior can be precisely controlled and switched on and off on demand for several cycles. We demonstrated that the MN-mediated synergistic therapy completely eradicated 4T1 tumors within 1 week after a single application of the MN and three cycles of laser treatment. No tumor recurrence and no significant body weight loss of mice were observed. Thus, the developed light-activatable MN with a unique embeddable feature offers an effective, user-friendly, and low-toxicity option for patients requiring long-term and multiple cancer treatments.

Nostoc flagelliforme is a terrestrial edible cyanobacterium that grows in arid and semi-arid steppes. The continued over-exploitation in the last century has led to a sharp decline of this resource and a severe deterioration of the steppe ecology. Liquid-cultured N. flagelliforme serves as promising algal 'seeds' for resource restoration. In this study, macroscopic (or visible) aquatic-living colonies (MaACs) of N. flagelliforme were developed under weak light and high nitrogen conditions. In a 24 day shake-flask culture, MaACs were propagated by about 4.5-fold in biomass without loss of their macro-morphology; at the same time, the addition of weak UV-B treatment resulted in slightly bigger MaACs. Polyvinylpyrrolidone (PVP) k30, a water-soluble polymer, was used to generate the coating around MaACs, and after full desiccation, the coated MaACs could recover their photosynthetic physiological activity when rehydrated, with 4% PVP k30 for coating being most effective. In contrast, PVP k30-coated microscopic aquatic-living colonies of N. flagelliforme and non-coated MaACs showed no resistance to full desiccation. The macroscopic morphology or structure of MaACs should be crucial for the formation of protection by PVP k30 coating. PVP k30-coated MaACs were more approaching to actual application for resource restoration., (© 2015 The Authors. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.)

Frameworks commonly used in trace metal ecotoxicology (e.g., biotic ligand model (BLM) and tissue residue approach (TRA)) are based on the established link between uptake, accumulation and toxicity, but similar relationships remain unverified for metal-containing nanoparticles (NPs). The present study aimed to (i) characterize the bioaccumulation dynamics of PVP-, PEG-, and citrate-AgNPs, in comparison to dissolved Ag, in Daphnia magna and Lumbriculus variegatus; and (ii) investigate whether parameters of bioavailability and accumulation predict acute toxicity. In both species, uptake rate constants for AgNPs were ∼ 2-10 times less than for dissolved Ag and showed significant rank order concordance with acute toxicity. Ag elimination by L. variegatus fitted a 1-compartment loss model, whereas elimination in D. magna was biphasic. The latter showed consistency with studies that reported daphnids ingesting NPs, whereas L. variegatus biodynamic parameters indicated that uptake and efflux were primarily determined by the bioavailability of dissolved Ag released by the AgNPs. Thus, principles of BLM and TRA frameworks are confounded by the feeding behavior of D. magna where the ingestion of AgNPs perturbs the relationship between tissue concentrations and acute toxicity, but such approaches are applicable when accumulation and acute toxicity are linked to dissolved concentrations. The uptake rate constant, as a parameter of bioavailability inclusive of all available pathways, could be a successful predictor of acute toxicity.

Pregnancy is a unique physiological state, in which C60 fullerene is reported to be distributed in both maternal and fetal tissues. Tissue distribution of C60 differs between pregnant and non-pregnant states, presumably due to functional changes in vasculature during pregnancy. We hypothesized that polyvinylpyrrolidone (PVP) formulated C60 (C60/PVP) increases vascular tissue contractility during pregnancy by increasing Rho-kinase activity. C60/PVP was administered intravenously to pregnant and non-pregnant female Sprague Dawley rats. Vascular responses were assessed using wire myography 24h post-exposure. Increased stress generation was observed in uterine artery, thoracic aorta and umbilical vein. Rho-Rho-kinase mediated force maintenance was increased in arterial segments from C60/PVP exposed pregnant rats when compared to PVP exposed rats. Our findings suggest that intravenous exposure to C60/PVP during pregnancy increases vascular tissue contractility of the uterine artery through elements of Rho-Rho-kinase signaling during late stages of pregnancy., (Copyright © 2014 Elsevier Inc. All rights reserved.)

Background: The establishment of methods for an in vitro continuous culture of Plasmodium falciparum is essential for gaining knowledge into its biology and for the development of new treatments. Previously, several techniques have been used to synchronize, enrich and concentrate P. falciparum, although obtaining cultures with high parasitaemia continues being a challenging process. Current methods produce high parasitaemia levels of synchronized P. falciparum cultures by frequent changes of culture medium or reducing the haematocrit. However, these methods are time consuming and sometimes lead to the loss of synchrony., Methods: A procedure that combines Percoll and sorbitol treatments, the use of magnetic columns, and the optimization of the in vitro culture conditions to reach high parasitaemia levels for synchronized Plasmodium falciparum cultures is described., Results: A new procedure has been established using P. falciparum 3D7, combining previous reported methodologies to achieve in vitro parasite cultures that reach parasitaemia up to 40% at any intra-erythrocytic stage. High parasitaemia levels are obtained only one day after magnetic column purification without compromising the parasite viability and synchrony., Conclusions: The described procedure allows obtaining a large scale synchronized parasite culture at a high parasitaemia with less manipulations than other methods previously described.

Solid dispersions have been used to improve the bioavailability of poorly water-soluble drugs. However, drug solid-state phase, compositional uniformity, and scale-up problems are issues that need to be addressed. To allow for highly controllable products, the drop printing (DP) technique can provide precise dosages and predictable compositional uniformity of active pharmaceutical ingredients in two-/three-dimensional structures when integrated with edible substrates. With different preparation conditions, DP was conducted to fabricate naproxen (NAP)-polyvinylpyrrolidone solid dispersions with chitosan and hydroxypropyl methylcellulose films as the substrate. Scanning electron microscopy, X-ray diffraction, second harmonic generation microscopy, and atomic force microscopy analyses were performed to characterize the microstructure and spatial distribution of NAP in the solid dispersions. The results identified that composition, temperature, and substrate type all had an impact on morphology and crystallization of samples. The surface energy approach was combined with classical nucleation theory to evaluate the affinity between the nucleus of NAP and substrates. Finally, the collective results of the drug were correlated to the release profile of NAP within each sample., (Copyright © 2012 Wiley Periodicals, Inc.)

Transformations and long-term fate of engineered nanomaterials must be measured in realistic complex natural systems to accurately assess the risks that they may pose. Here, we determine the long-term behavior of poly(vinylpyrrolidone)-coated silver nanoparticles (AgNPs) in freshwater mesocosms simulating an emergent wetland environment. AgNPs were either applied to the water column or to the terrestrial soils. The distribution of silver among water, solids, and biota, and Ag speciation in soils and sediment was determined 18 months after dosing. Most (70 wt %) of the added Ag resided in the soils and sediments, and largely remained in the compartment in which they were dosed. However, some movement between soil and sediment was observed. Movement of AgNPs from terrestrial soils to sediments was more facile than from sediments to soils, suggesting that erosion and runoff is a potential pathway for AgNPs to enter waterways. The AgNPs in terrestrial soils were transformed to Ag(2)S (~52%), whereas AgNPs in the subaquatic sediment were present as Ag(2)S (55%) and Ag-sulfhydryl compounds (27%). Despite significant sulfidation of the AgNPs, a fraction of the added Ag resided in the terrestrial plant biomass (~3 wt % for the terrestrially dosed mesocosm), and relatively high body burdens of Ag (0.5-3.3 μg Ag/g wet weight) were found in mosquito fish and chironomids in both mesocosms. Thus, Ag from the NPs remained bioavailable even after partial sulfidation and when water column total Ag concentrations are low (<0.002 mg/L).

To better understand their fate and toxicity in aquatic environments, we compared the aggregation and dissolution behavior of gum arabic (GA) and polyvinylpyrrolidone (PVP) coated Ag nanoparticles (NPs) in aquatic microcosms. There were four microcosm types: surface water; water and sediment; water and aquatic plants; or water, sediment, and aquatic plants. Dissolution and aggregation behavior of AgNPs were examined using ultracentrifugation, ultrafiltration, and asymmetrical flow field flow fractionation coupled to ultraviolet-visible spectroscopy, dynamic and static laser light scattering, and inductively coupled plasma mass spectrometry. Plants released dissolved organic matter (DOM) into the water column either through active or passive processes in response to Ag exposure. This organic matter fraction readily bound Ag ions. The plant-derived DOM had the effect of stabilizing PVP-AgNPs as primary particles, but caused GA-AgNPs to be removed from the water column, likely by dissolution and binding of released Ag ions on sediment and plant surfaces. The destabilization of the GA-AgNPs also corresponded with X-ray absorption near edge spectroscopy results which suggest that 22-28% of the particulate Ag was associated with thiols and 5-14% was present as oxides. The results highlight the potential complexities of nanomaterial behavior in response to biotic and abiotic modifications in ecosystems, and may help to explain differences in toxicity of Ag observed in realistic exposure media compared to simplified laboratory exposures.

Hydrogels can offer new opportunities for the design of efficient packaging materials with desirable properties (i.e. durability, biodegradability and mechanical strength). It is a promising and emerging concept, as most of the biopolymer based hydrogels are supposed to be biodegradable, they can be considered as alternative eco-friendly packaging materials. This article reports about synthetic (polyvinylpyrrolidone (PVP)) and biopolymer (carboxymethyl cellulose (CMC)) based a novel hydrogel film and its nature of biodegradability under controlled environmental condition. The dry hydrogel films were prepared by solution casting method and designated as 'PVP-CMC hydrogel films'. The hydrogel film containing PVP and CMC in a ratio of 20:80 shows best mechanical properties among all the test samples (i.e. 10:90, 20:80, 50:50, 80:20 and 90:10). Thus, PVP-CMC hydrogel film of 20:80 was considered as a useful food packaging material and further experiments were carried out with this particular hydrogel film. Biodegradation of the PVP-CMC hydrogel films were studied in liquid state (Czapec-Dox liquid medium+soil extracts) until 8 weeks. Variation in mechanical, viscoelastic properties and weight loss of the hydrogel films with time provide the direct evidence of biodegradation of the hydrogels. About 38% weight loss was observed within 8 weeks. FTIR spectra of the hydrogel films (before and after biodegradation) show shifts of the peaks and also change in the peak intensities, which refer to the physico-chemical change in the hydrogel structure and SEM views of the hydrogels show how internal structure of the PVP-CMC film changes in the course of biodegradation., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

In view of contradictory data on the toxicity of fullerenes for live organisms we studied the effect of water-soluble complexes of C60 with N-polyvivyl-pirrolidone (C60/PVP) and gamma-cyclodextrine (C60/gamma-CD) on MA-104 cells in culture. Both complexes proved to be non-toxic for cultured cells in the dark in wide range of concentrations. Both complexes provoke changes of cellular ultra-structure which reflect the enhancement of metabolic activity. At the same time only the exposition with the complex C60/PVP leads to the essential growth of number and size of mitochondria. However, the effect of two studied water-soluble forms of C60 under intensive UV-irradiation of cells proved to be opposite: C60/PVP had a cyto-protective action while C60/gamma-CD caused a significant growth of photo-toxicity. Possible reasons of the differences in the action of different forms of C60 on living organisms are discussed.

Polyvinylpyrrolidone (PVP) storage disease can be caused by local injection and systemic parenteral administration of PVP-containing solutions. PVP has been used as plasma expander, a retardant in certain medicines, components of food additive, and hair care products. High-molecular-weight PVP polymers are prevented from renal excretion and are retained in the reticuloendothelial system. The clinical manifestations include skin lesions and hematologic and orthopedic complications because of bone marrow failure and bony destruction with infiltration of PVP storage histiocytes. Herein, we report a 65-year-old female patient with PVP storage disease presenting as femoral fracture and anemia. In our case, some gelatinous material was noted atthe fracture site, and the initial clinical impression was bony tumor or metastatic lesion. Imprint cytology showed some atypical cells exhibiting foamy cytoplasm and vacuoles. The biopsy specimen revealed that some blue-grayish, vacuolated cells infiltrate in the bone marrow spaces and regional soft tissue near fracture site. The unusual morphology caused a diagnostic dilemma, with the differential diagnosis, including metastatic carcinoma, chordoma, liposarcoma, and hereditary storage disease. The vacuolated cells were positive for CD68, mucicarmine, and Congo red stains, but negative for CK (AE1/AE3) and S-100 protein. Combing the patient's history with long-term intravenous supplement of PVP-containing blood solutions, PVP storage disease involving the bone and regional soft tissue was diagnosed., (Copyright © 2010 Wiley Periodicals, Inc.)

Polyvinylpyrrolidone-protected (PVP-protected) graphene was synthesized by refluxing graphene oxide (GO) in dimethylformamide (DMF), using PVP as the dispersant. The structure and stability of this composite (DMF-rGO) were characterized using UV-vis spectroscopy, atomic force microscopy (AFM), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), x-ray diffraction (XRD) and thermogravimetric analysis (TGA). The results confirm the presence of a single sheet of DMF-rGO with PVP of 42%. This kind of chemically reduced GO has a greater solubility in water and also is more biocompatible than rGO reduced by hydrazine hydrate. This method is simple, environmentally friendly and the composite has potential applications in biology and polymer nanocomposites.

Formulations containing amorphous active pharmaceutical ingredients (APIs) present great potential to overcome problems of limited bioavailability of poorly soluble APIs. In this paper, we directly compare for the first time spray drying and milling as methods to produce amorphous dispersions for two binary systems (poorly soluble API)/excipient: sulfathiazole (STZ)/polyvinylpyrrolidone (PVP) and sulfadimidine (SDM)/PVP. The coprocessed mixtures were characterized by powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) and intrinsic dissolution tests. PXRD and DSC confirmed that homogeneous glassy solutions (mixture with a single glass transition) of STZ/PVP were obtained for 0.05 ≤ X(PVP) (PVP weight fraction) < 1 by spray drying and for 0.6 ≤ X(PVP) < 1 by milling (at 400 rpm), and homogeneous glassy solutions of SDM/PVP were obtained for 0 < X(PVP) < 1 by spray drying and for 0.7 ≤ X(PVP) < 1 by milling. For these amorphous composites, the value of T(g) for a particular API/PVP ratio did not depend on the processing technique used. Variation of T(g) versus concentration of PVP was monotonic for all the systems and matched values predicted by the Gordon-Taylor equation indicating that there are no strong interactions between the drugs and PVP. The fact that amorphous SDM can be obtained on spray drying but not amorphous STZ could not be anticipated from the thermodynamic driving force of crystallization, but may be due to the lower molecular mobility of amorphous SDM compared to amorphous STZ. The solubility of the crystalline APIs in PVP was determined and the activities of the two APIs were fitted to the Flory-Huggins model. Comparable values of the Flory-Huggins interaction parameter (χ) were determined for the two systems (χ = -1.8 for SDM, χ = -1.5 for STZ) indicating that the two APIs have similar miscibility with PVP. Zones of stability and instability of the amorphous dispersions as a function of composition and temperature were obtained from the Flory-Huggins theory and the Gordon-Taylor equation and were found to be comparable for the two APIs. Intrinsic dissolution studies in aqueous media revealed that dissolution rates increased in the following order: physical mix of unprocessed materials < physical mix of processed material < coprocessed materials. This last result showed that production of amorphous dispersions by co-milling can significantly enhance the dissolution of poorly soluble drugs to a similar magnitude as co-spray dried systems.

Ethinyl estradiol and levonorgestrel were insoluble in blends of high:medium:low molecular weight polyisobutene adhesives (ratio: 1:5:0, 1:5:2 and 1:5:4) but soluble in acrylic adhesives (Durotak 87-202A, Durotak 87-2074 and Durotak 87-2677). The incorporation of drug adsorbates onto crospovidone into the polyisobutene blends yielded crystal-free patches. The drug release from these patches was independent of polyisobutene's molecular weight distribution, probably because the drug release occurred mainly through fluid filled channels. By contrast, the drug release from acrylic adhesives was independent of whether the patches contained pure drugs or drug adsorbates onto crospovidone. A higher degree of saturation (or supersaturation) in these systems resulted in a higher thermodynamic activity of the drugs and hence a higher drug release. The crystal-free acrylic and polyisobutene patches did not show drug recrystallization after 3 months at 25°C/60 RH and 40°C/75 RH. The adhesive properties of polyisobutene patches were investigated in vitro and in vivo. The area under the curve of force-distance curves recorded with the texture analyzer correlated well with the in vivo skin adhesion. The elongation at detachment showed the same trend as the in vivo matrix creep. Crospovidone contents ≤ 30% had no detrimental effect on the adhesive properties of the patches., (Copyright © 2010 Elsevier B.V. All rights reserved.)

Background Aims: The ethical and biologic limitations with current sources of stem cells have resulted in a quest to look for alternative sources of multipotent stem cells of human origin. Amniotic membrane is of interest as a source of cells for regenerative medicine because of its ease of availability, plasticity and inexhaustible source that does not violate the sanctity of independent life. Although researchers have shown the stem cell-like potential of human amniotic epithelial cells, the mesenchymal part of amnion has remained less explored., Methods: We established a long-term culture of mesenchymal-like stem cells derived from full-term human amniotic membrane and their differentiation into functional pancreatic lineage., Results: The amnion-derived mesenchymal-like stem cells expressed various mesenchymal markers and demonstrated multilineage differentiation capacity. We also observed that these cells could form islet-like clusters (ILC) on exposure to serum-free defined media containing specific growth factor and differentiating agents. Differentiated ILC showed expression of human insulin, glucagon and somatostatin by immunocytochemistry, while quantitative reverse transcription/real-time-polymerase chain reaction (qRT-PCR) data demonstrated the expression of insulin, glucagon, somatostatin, Ngn3 and Isl1. Moreover, encapsulation of the ILC in polyurethane-polyvinyl pyrrolidone macrocapsules and their subsequent transplantation in experimental diabetic mice resulted in restoration of normoglycemia, indicating their ability to respond to high glucose without immunorejection., Conclusions: Our results demonstrate that amnion-derived mesenchymal stromal cells can undergo islet neogenesis, indicating amnion as an alternative source of islets for cell replacement therapy in diabetes.

By Western blot and immunostaining we proved that polyvinylpyrrolidone (PVP)-wrapped fullerene molecules (PVP-fullerene) could combine the 8- and 53-kb proteins which localize in the membrane of human skin keratinocytes HaCaT. Only fullerene molecules are able to cross the lipid membrane and conjugate 53-kb proteins in the cytosol. There are no fullerene molecules detectable in the nucleus or cytoskeleton. Ultraviolet-A (UVA)-irradiation on HaCaT or normal human epidermal melanocytes (NHEM) caused nuclear fragmentations, lowering of intracellular DNA-contents below diploidy, concurrently with the repressed DNA synthesis and the increased DNA-3'OH cleavage terminals, all of which were repressed by PVP-fullerene, as shown by flow cytometry and PI- or TUNEL-stain fluorography. Translocation of the transcriptional factor NF-kappaB in the cytoplasm to the nucleus of the keratinocytes was caused with UVA and repressed by PVP-fullerene with cytoprotective effects. Thus, the PVP-fullerene may be developed as a UV-protective agent with DNA-preservative effects owing to its combinative ability to molecules in the cytoplasm and cytomembrane, and then represses cellular oxidative stress and blocks abnormal signal pathways., (© 2010 Wiley-Liss, Inc.)

A photophysical study describing the effects of the polymer polyvinylpyrrolidone (PVP), on the binding interaction between chlorin e6 (Ce6) with bovine serum albumin (BSA) and human plasma proteins such as very low-density lipoprotein (VLDL), high-density lipoprotein (HDL) and low-density lipoprotein (LDL) was performed using a steady-state fluorescence technique. Combined Ce6-PVP was found to have very stable photostability at three different temperatures (4°C, 21°C and 37°C) when dissolved in an aqueous solution containing 5% and 10% fetal calf serum. The partition coefficient of combined Ce6-PVP was relatively more hydrophilic than that of Ce6 alone. There was a marked increase in the emission profile of Ce6-PVP and the correlated bathochromic shift on the addition of proteins. These results also suggest that Ce6-PVP might have slightly greater association energy with VLDL in comparison to Ce6 alone. The co-localization of Ce6 and Ce6-PVP in cells was also assessed using confocal microscopy. The association of Ce6 with PVP resulted in an enhanced cellular uptake of Ce6 within the cytoplasmic compartment of cells. The present study supported the hypothesis that PVP improves the permeability of Ce6 through the biological membranes of cells., (Copyright © 2010 Elsevier B.V. All rights reserved.)

The nonenzymatic and enzymatic degradation behaviors of the poly(vinyl pyrrolidone)-poly(epsilon-caprolactone) (PVP-PCL) diblock copolymers micelles in aqueous solution were investigated by dynamic light scattering (DLS), size exclusion chromatography (SEC), and high performance liquid chromatography (HPLC), and the morphology variation of these micelles in the degradation procedure were inspected by transmission electronic microscopy (TEM). It is found that the enzymatic degradation of PVP-PCL micelles is much faster and the degradation rate of PVP-PCL micelles is proportional to the enzyme concentration for a given micelles' concentration. However, in the nonenzymatic case, the degradation of PVP-PCL micelles is quite slow under neutral condition and fast in acidic or basic medium. Interestingly, morphology transformation from spheres to a necklace and rod-like nanostructure was observed during the degradation procedure under basic condition. This shape reconstruction of PVP-PCL nanoparticles in the degradation process opens a new window to fabricate hierarchical supramolecular structures.

In this paper, we present the results of a study on the membrane-active properties of gossypol, its derivatives and their polyvinylpyrrolidone complexes as assessed by differential scanning calorimetry and by the fluorescent probe method. The latter revealed the change in polarization of the incident radiation caused by the action of the polyphenol on the artificial membrane lipid matrix.

The conjugate of the gossypol derivative megosin (1) with N-polyvinylpyrrolidone named rometin (2) was synthesized. The effects of 1 and 2 on the structure and permeability of human erythrocytes and rat liver mitochondria were compared. Compound 1 induced dose-dependent erythrocyte hemolysis and increased mitochondrial permeability, with concomitant changes in membrane structure as determined by ESR and fluorescence anisotropy methods. Immobilization of 1 on N-polyvinylpyrrolidone (compound 2) increased its water solubility and reduced the intensity of its effects on erythrocyte membrane integrity and mitochondrial permeability, which correlated with a decrease in the membranes structural changes induced by the compound. Although the same concentrations of free and N-polyvinylpyrrolidone bound 1 were used, far less (14)C-labeled 1 was incorporated into the membranes from complex than free 1. The increase in water solubility and the reduction of membrane-active properties of 1 after immobilization on N-polyvinylpyrrolidone could explain our previous observation of the decreased toxicity of 1.

Magnetic resonance imaging of cells labeled with superparamagnetic iron oxide (SPIO) could be a valuable tool for tracking transplanted cells in living organisms. Human bone marrow-derived mesenchymal stem cells (hBMMSC) were labeled with a novel polyvinyl pyrrolidone (PVP)-coated SPIO. Prussian blue staining and electron microscopy revealed that almost all of the cells were efficiently labeled with PVP-SPIO nanoparticles. There were no signs of cytotoxicity, even at concentrations of up to 1600 microg Fe/ml of the nanoparticles, and the labeled cells were successfully visualized by in vitro cellular MRI. In addition, there was no significant alteration of the phenotype or the adipo/osteo/chondrogenic differentiation potential of the cells. This was in contrast to Feridex IV labeling that led to the inhibition of hBMMSC chondrogenesis. Following intramuscular injection in a rabbit hind limb ischemia model, the intercellular migration of the labeled cells toward the ablated site was clearly tracked through in vivo MRI. The localization of the transplanted cells observed by MRI correlated well with postmortem histological studies. These results demonstrate that the novel PVP-SPIO nanoparticles appear to be efficient MR contrast agents and may enable non-invasive in vivo tracking of stem cells in experimental and clinical settings during cell therapy., (Copyright (c) 2009 John Wiley & Sons, Ltd.)

The synthesis of a Ni-nitrilotriacetic acid (Ni-NTA) attached via a new tyrosine-based linker matrix on monolithic crosslinked poly(vinyl benzyl chloride)/poly(vinylpyrrolidinone) is described. This matrix is incorporated inside a microstructured PASSflow reactor which was used for automatic purification and immobilisation of His(6)-tagged proteins. These could be used as stable and highly active biocatalysts for the synthesis of (R)-benzoin (6), (R)-2-hydroxy-1-phenylpropan-1-one (7) and 6-O-acetyl-D-glucal (17) in a flow-through mode.

A study of the calcification of the polyvinyl alcohol/polyvinyl pyrrolidone (PVA/PVP) hydrogels during their exposure to a calcium chloride solution or a simulated body fluid has been carried out. On the basis of the experiments, using a two-compartment permeation cell, the diffusion of calcium ions and their subsequent deposition in the hydrogels were elucidated. Steady-batch experiments were also performed to further elaborate the deposition pattern and the types of calcium deposits. It was demonstrated that Fick's second law of diffusion can describe the diffusion of calcium ions through PVA/PVP hydrogels at 310 K. The diffusion coefficient was determined to be (4.4+/-0.1)x10(-10) m2/s and the partition coefficient for the hydrogels was 0.06. Formation of calcium deposits was noticed taking place both on the surface and inside the hydrogels. The deposits formed on the surface have flake morphology, while the deposits inside the hydrogels are more like globular aggregates. Both types of deposits have been characterized as being comprised calcium and hydroxyl ion deficient apatites with chloride ions the most likely substituting species at the hydroxyl sites., (Copyright (c) 2007 Wiley Periodicals, Inc.)

Many hydrogels have been proposed as articular cartilage replacements as an alternative to partial or total joint replacements. In the current study, poly(vinyl alcohol)/poly(vinyl pyrrolidone) (PVA/PVP) hydrogels were investigated as potential cartilage replacements by investigating their in vitro wear and friction characteristics in a pin-on-disk setup. A three-factor variable-level experiment was designed to study the wear and friction characteristics of PVA/PVP hydrogels. The three different factors studied were (a) polymer content of PVA/PVP hydrogels, (b) load, and (c) effect of lubricant. Twelve tests were conducted, with each lasting 100,000 cycles against Co-Cr pins. The average coefficient of friction for synovial fluid lubrication was a low 0.035 compared with 0.1 for bovine serum lubrication. Frictional behavior of PVA/PVP hydrogels did not follow Amonton's law of friction. Wear of the hydrogels was quantified by measuring their dry masses before and after the tests. Higher polymer content significantly reduced the wear of hydrogel samples with 15% PVA/PVP samples, showing an average dry polymer loss of 4.74% compared with 6.05% for 10% PVA/PVP samples. A trend change was observed in both the friction and wear characteristics of PVA/PVP hydrogels at 125 N load, suggesting a transition in the lubricating mechanism at the pin-hydrogel interface at the critical 125 N load., (Copyright (c) 2007 Wiley Periodicals, Inc.)

We report a general and facile method for the encapsulation of DNA in nanoengineered, degradable polymer microcapsules. Single-stranded (ss), linear double-stranded (ds), and plasmid DNA were encapsulated into disulfide-cross-linked poly(methacrylic acid) (PMA) capsules. The encapsulation procedure involves four steps: adsorption of DNA onto amine-functionalized silica (SiO(2)(+)) particles; sequential deposition of thiolated PMA (PMA (SH)) and poly(vinylpyrrolidone) to form multilayers; cross-linking of the thiol groups of the PMA (SH) in the multilayers into disulfide linkages; and removal of the sacrificial SiO(2)(+) particles. Multilayer growth was dependent on the surface coverage of DNA on the SiO(2)(+) particles, with stable capsules formed from particles with up to 50% DNA surface coverage. The encapsulation strategy applies to nucleic acids with varied size and conformation and allows DNA to be concentrated over 100-fold from dilute solutions into monodisperse, uniformly loaded polymer capsules. The capsule loading can be controlled by the DNA:SiO(2)(+)particle ratio, and for 1 microm diameter capsules, loadings of approximately 1000 chains of 800 bp dsDNA and more than 10,000 chains of 20-mer ssDNA can be achieved. The encapsulated DNA was released and successfully used in polymerase chain reactions as both templates (linear dsDNA and plasmid DNA) and primer sequences (ssDNA), confirming the functionality and structural integrity of the encapsulated DNA. These DNA-loaded polymer microcapsules hold promise as delivery vehicles for gene therapy and diagnostic applications.

Polyvinylpyrrolidone (PVP), a polymer of the monomer N-vinylpyrrolidone with various molecular weights, was originally developed as a plasma expander. Currently, it is widely used in hair sprays, skin care products, fruit juices, and as a retarding agent in drugs such as procaine and hormones. PVP polymers with a molecular weight greater than 20,000 cannot be excreted by the kidneys and therefore are phagocytosed and permanently stored in the reticular endothelial system, leading to the so-called PVP storage disease. We report a case of localized cutaneous PVP storage disease presenting with persistent upper lip swelling and mimicking cheilitis granulomatosa, which has never been reported before.

Polyphenol oxidase (PPO) obtained from wheat bran catalyzed the oxidation of 4-methyl catechol. Phenolic compounds found naturally in crude extract played role as an endogeneous substrate and activity of crude extract needed correction. Activity versus enzyme concentration gave a linear plot at high substrate concentration whereas a nonlinear plot was obtained at low substrate concentration which proved the presence of endogeneous substrate. Adsorption on celite and extraction with polyvinylpyrrolidone (PVPP) caused the removal of phenols. Adsorption of PPO on celite yielded a 4-fold increase in specific activity whereas extraction with PVPP yielded a 2.5-fold increase in specific activity compared to the crude extract. The kinetics of PPO catalyzed oxidation obeyed Michaelis-Menten model; Km and Vmax values were found as 218 mM and 99 microM/min, respectively. The enzyme was inhibited by ethyl alcohol, dithiothreitol (DTT) and isoproterenol and exhibited heat stability up to a temperature of 90 degrees C. The optimum pH of the enzyme was found to be 5.0.