Search

The majority of commercially available monoclonal antibody (mAb) formulations are stabilized with one of three non-ionic surfactants: polysorbate 20 (PS20), polysorbate 80 (PS80), or poloxamer 188 (P188). All three surfactants are susceptible to degradation, which can result in functionality loss and subsequent protein aggregation or free fatty acid particle formation. Consequently, quantitative, and qualitative analysis of surfactants is an integral part of formulation development, stability, and batch release testing. Due to the heterogeneous nature of both polysorbates and poloxamer, online isolation of all the compounds from the protein and other excipients that may disturb the subsequent liquid chromatography with charged aerosol detection (LC-CAD) analysis poses a challenge. Herein, we present an analytical method employing LC-CAD, utilizing a combination of anion and cation exchange columns to completely remove proteins online before infusing the isolated surfactant onto a reversed-phase column. The method allows high throughput analysis of polysorbates within 8 minutes and poloxamer 188 within 12 minutes, providing a separation of the surfactant species of polysorbates (unesterified species, lower esters, and higher esters) and poloxamer 188 (early eluters and main species). Accuracy and precision assessed according to the International Council for harmonisation (ICH) guideline were 96 - 109 % and ≤1 % relative standard deviation respectively for all three surfactants in samples containing up to 110 mg/mL mAb. Subsequently, the method was effectively applied to quantify polysorbate 20 and polysorbate 80 in nine commercial drug products with mAb concentration of up to 180 mg/mL., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Poloxamer (PL)188 is a commonly used pharmaceutical excipient with unique physicochemical properties. In this study, an MS ALL quantitative method for the determination of PL188 in rat plasma by UHPLC-Q-TOF/MS was developed and validated. PL188 was analyzed on PLRP-S reversed-phase column (50 × 4.6 mm, 8 μm, 1,000 Å) with mobile phase 0.1% formic acid-water and 0.1% formic acid in acetonitrile-isopropanol (2:3, v/v). The liner range was 0.1-10.0 μg/ml. A pharmacokinetic study was performed on rats at a dose of 5 mg/kg by intravenous injection. The pharmacokinetic parameters of intravenous injection were as follows: half-life was 2.0 ± 1.1 h, volume of distribution was 5.1 ± 3.2 L/kg, area under the concentration-time curve was 3.0 ± 0.6 μg/L h and clearance was 1.7 ± 0.3 L/h/kg. The results indicated that PL188 could be rapidly distributed to tissues with a high clearance rate. This study can provide a good reference for the further study of PL188., (© 2021 John Wiley & Sons, Ltd.)

Poloxamers are commonly used pharmaceutical excipients. They are high molecular weight polymers formed from polypropylene oxide (PPO) and polyethylene oxide (PEO). However, PL124, a low molecular weight example in the poloxamer family, has rarely been reported, and there is no research into its tissue distribution in the body after administration. In this study, rat tissue samples were quantitatively studied via UHPLC-Q-TOF/MS after the intravenous administration of 10 mg kg -1 PL124. The quantitative method showed good sensitivity and selectivity. The linear range of PL124 was 0.1-5 μg mL -1 and the LLOQ was 0.1 μg mL -1 . The relative error in terms of the accuracy was no higher than 13.9%, and the relative standard deviation in terms of the precision was no higher than 9.6%. The extraction recovery, matrix effect, and stability results of the established method were also satisfactory. The research showed that PL124 can be quickly distributed to large amounts of tissue, and tissue with higher levels of blood flow has higher concentrations. PL124 could be rapidly eliminated in 4 h from most organs, except the heart and liver. This study can be helpful for the further analysis of PL124.

Poloxamer is a commonly used pharmaceutical excipient. It is a high molecular polymer formed using polypropylene oxide and polyethylene oxide units. Specifically, poloxamer 124 is one of the smaller molecular weight in the poloxamer series; however, its pharmacokinetic behaviors in vivo are still unclear. In this study, a method for quantifying poloxamer 124 in rat plasma through ultra-high-performance liquid chromatography coupled with quadrupole time of flight mass spectrometry was developed. The intravenous dosage of PL124 was 10 mg/kg. Plasma was collected at different times. The calibration curve was linear in the range of 0.1-5 μg/mL for the poloxamer 124 (r ≥ 0.9956) with the lower limit of quantitation of 0.1 μg/ml. The relative standard deviation of the intraday and interday precisions was below 8.0%, and the relative error of the accuracy was within ±12.0%. The extraction recovery, matrix effect, and stability were satisfactory in rat plasma. The validated method was successfully applied to a pharmacokinetic study of poloxamer 124 in rats. Results indicated that poloxamer 124 could be rapidly absorbed and eliminated through caudal vein injection. This study is helpful for the further study of poloxamer 124., (© 2021 Wiley-VCH GmbH.)

Constraints related to sample preparation are some of the primary obstacles to widespread deployment of molecular diagnostics for rapid detection of trace quantities (≤103 CFU/mL) of food-borne pathogens. In this research, we report a sample preparation method using a novel handheld electroflotation system to concentrate and recover dilute quantities (102-103 CFU/mL) of Escherichia coli (E. coli) 25922 in artificially contaminated samples for reliable, rapid detection by loop-mediated isothermal amplification (LAMP). To protect suspended cells from shear stresses at bubble surfaces, a non-ionic surfactant (Pluronic-F68) and flocculant (chitosan oligosaccharide) were used to aggregate cells and reduce their surface hydrophobicity. Effective conditions for recovery were determined through multifactorial experiments including various concentrations of Pluronic-F68 (0.001, 0.01, 0.1, 1 g L-1), chitosan oligosaccharide (0.01, 0.1, 1, 10 g L-1), bacteria (102, 103, 104 CFU/mL E. coli 25922), recovery times (10, 15 and 20 minutes), and degrees of turbulent gas flux ("high" and "low"). The automated electroflotation system was capable of concentrating effectively all of the bacteria from a large sample (380 mL 0.1 M potassium phosphate buffer containing 102 CFU/mL E. coli) into a 1 mL recovered fraction in less than 30 minutes. This enabled detection of bacterial contaminants within 2 hours of collecting the sample, without a specialized laboratory facility or traditional enrichment methods, with at least a 2-3 order of magnitude improvement in detection limit compared to direct assay with LAMP., Competing Interests: I have read the journal's policy and the authors of this manuscript have the following competing interests: PCT Application No. PCT/US19/41833, Filed, July 15, 2019 Title: “Point-of-Care Electroflotation of Dispersed, Low Tolerance Pathogens”. This does not alter our adherence to PLOS ONE policies on sharing data and materials, as articulated at http://journals.plos.org/plosone/s/competing-interests), nor does it impose any restrictions on our sharing of data or other materials.

At the borderline between size exclusion chromatography (SEC) and interaction chromatography (IC) there is a special mobile phase composition and temperature at which polymer chains become "chromatographically invisible". This point is termed as "chromatographic critical point" and chromatographic separations performed using these conditions are called "liquid chromatography at critical conditions" (LCCC). LCCC is a powerful technique in the analysis of functional polymers and block copolymers. At these so-called critical conditions molar mass discrimination of any specific homopolymer is suppressed rendering elution of whole range of molar mass at same elution volume. These conditions allow enhanced separation with regard to non-critical segment either in exclusion or interaction regime of the polymer chromatography. This article is intended to critically discuss different parameters that can be maneuvered to improve separation and in turn characterization of non-critical segment of block copolymers at LCCC. Different experimental parameters evaluated in this study include pore size of the column, mobile phase composition, temperature and gradients. These parameters can be adeptly adjusted to improve separation of non-critical segment while keeping the other segment close to critical conditions. Current study demonstrates that pore diameter and mobile phase are the only practical variable that can be used for improvement of characterization of non-critical block in the block copolymer while non-critical block is in exclusion regime. On the other hand, pore diameter of the column, temperature, solvent composition and gradients are important parameters that can be skillfully tuned for improvement of separation of non-critical block while non-critical block elutes in interaction regime. The above-mentioned variations are evaluated for di-block as well as tri-block copolymers of A-B-A and B-A-B type. Moreover, LCCC-IC is especially important for analysis of poloxamers., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Poloxamers are water-soluble polymers that are widely used in cell culture bioprocessing to protect cells against shearing forces. Use of poor-quality poloxamers may lead to a drastic reduction in cell growth, viabilities and productivities in cell culture-based manufacturing. In order to evaluate poloxamer quality and promote more consistent performance, a rapid cell membrane adhesion to hydrocarbon assay was developed based on the adhesive properties of cell membranes to selective hydrocarbons. The assay can identify a poor-performing poloxamer characterized by significant drop in viable cell density and percent viability. The assay was verified across multiple good and bad poloxamer lots, and the results were in agreement with established cell growth and high-performance liquid chromatography assays.

Poloxamer P188 is a common nonionic surfactant additive used in cell culture media as a cellular protectant from the hydrodynamic forces and shear stress during bioprocessing. Presence of a hydrophobic high molecular weight impurity contaminant has been shown to compromise its protective properties and lead to batch failure. In this work we present, a reliable, sensitive, and rapid analytical method to detect and quantify the contaminant impurity in poloxamer 188. This method replaces a laborious and time-consuming functional test in the form of a shake flask assay. The method is based upon reversed-phase liquid chromatography with charged aerosol detection, simple mobile phase compositions, and a three-step gradient. The method was optimized to resolve the impurity from the main P188 fraction in less than 10 min. Analytical method qualification and functional test comparison demonstrate equivalent or better high throughput impurity screening performance. Attempts to identify the impurity and establish suitable method positive control standards are also discussed., (© 2019 American Institute of Chemical Engineers.)

The efficacy of surfactant mixtures of Pluronic ® F127 and Tween 80 at overall concentration in the micromolar range and molar ratio 1:1, 1:10, and 10:1 in inhibiting aggregation of the photosensitizer meso-tetraphenyl chlorin disulphonate (TPCS 2a ) was investigated in aqueous media at pH 2.9 by means of steady-state absorption and fluorescence emission spectroscopy as well as time-resolved fluorescence analysis. Corresponding experiments were performed at pH 7.4 in the absence of surfactants to determine the spectroscopic properties of a monomeric sample. Aggregation resulted in a red shift of the Soret absorption band and in substantial fluorescence quenching. The fluorescence lifetime of TPCS 2a was a particularly sensitive indicator of the aggregation state, as the monomer at pH 7.4 decayed with a ∼ 10 ns time constant, while aggregation resulted in subnanosecond decay. The critical micelle concentration (CMC) of the surfactant mixtures was determined spectrophotometrically in the presence of TPCS 2a . The ability of the surfactant mixtures to prevent aggregation at acidic pH was evaluated at overall surfactant concentration below and above CMC. Solubilization of TPCS 2a in Pluronic ® F127/Tween 80 mixtures prevented aggregation of the photosensitizer at overall surfactant concentrations much lower than those needed for both pure Pluronic ® F127 and pure Tween 80.

Pluronic F127 ® was associated with a carbomer homopolymer type B, as a model polymer blend to evidence the information provided by rheological and mechanical analyses on the development of bioadhesive thermoresponsive systems. The mechanical analysis enabled to observe that 20% (w/w) Pluronic F127 ® -polymer blends were harder, more adhesive, more mucoadhesive, more compressive and less soft. In addition, continuous flow rheometry demonstrated that the systems were plastic with rheopexy (15%, w/w, Pluronic F127 ® ) or thixotropic (20%, w/w, Pluronic F127 ® ). Oscillatory rheometry exhibited the increase of temperature, and the polymeric concentration increases the elasticity of the formulations. Moreover, correlation index showed that softness and textural analysis can be correlated and complementary, whereas adhesiveness cannot be correlated to mucoadhesion and is less specific. Rheological interaction parameter and gelation temperature showed that 15/0.25-polymer blend is suitable for pharmaceutical and biomedical application, since it can be administered in the liquid form and be gelled in the application site with proper mucoadhesion that can suggest an improved clinical efficacy. Therefore, the mechanical and rheological analyses are useful to characterize and select the best bioadhesive thermoresponsive formulation for the proposed treatment with improved performance., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Poloxamer 188, a commonly used emulsifying and solubilizing agent, was found to be the cause of crystallization of an investigational drug, AMG 579, from its amorphous solid dispersion at accelerated storage conditions. Investigation of this physical stability issue included thorough characterization of poloxamer 188 at non-ambient conditions. At 40°C, poloxamer 188 becomes deliquescent above relative humidity of 75%. Upon returning to ambient conditions, the deliquescent poloxamer 188 loses water and re-solidifies. The reversible phase transformation of poloxamer 188 may cause physical and chemical stability issues and this risk should be assessed when selecting it as an excipient for formulation development., (Copyright © 2017 Elsevier B.V. All rights reserved.)

In a solid dispersion (SD), the drug is generally dispersed either molecularly or in the amorphous state in polymeric carriers, and the addition of a surfactant is often important to ensure drug release from such a system. The objective of this investigation was to screen systematically polymer-surfactant and polymer-drug-surfactant miscibility by using the film casting method. Miscibility of the crystalline solid surfactant, poloxamer 188, with two commonly used amorphous polymeric carriers, Soluplus® and HPMCAS, was first studied. Then, polymer-drug-surfactant miscibility was determined using itraconazole as the model drug, and ternary phase diagrams were constructed. The casted films were examined by DSC, PXRD and polarized light microscopy for any crystallization or phase separation of surfactant, drug or both in freshly prepared films and after exposure to 40°C/75% RH for 7, 14, and 30 days. The miscibility of poloxamer 188 with Soluplus® was <10% w/w, while its miscibility with HPMCAS was at least 30% w/w. Although itraconazole by itself was miscible with Soluplus® up to 40% w/w, the presence of poloxamer drastically reduced its miscibility to <10%. In contrast, poloxamer 188 had minimal impact on HPMCAS-itraconazole miscibility. For example, the phase diagram showed amorphous miscibility of HPMCAS, itraconazole, and poloxamer 188 at 54, 23, and 23% w/w, respectively, even after exposure to 40°C/75% RH for 1 month. Thus, a relatively simple and practical method of screening miscibility of different components and ultimately physical stability of SD is provided. The results also identify the HPMCAS-poloxamer 188 mixture as an optimal surface-active carrier system for SD.

Poloxamers are low molar mass triblock copolymers of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO), having number of applications as non-ionic surfactants. Comprehensive one and two-dimensional liquid chromatographic (LC) analysis of these materials is proposed in this study. The separation of oligomers of both types (PEO and PPO) is demonstrated for several commercial poloxamers. This is accomplished at the critical conditions for one of the block while interaction for the other block. Reversed phase LC at CAP of PEO allowed for oligomeric separation of triblock copolymers with regard to PPO block whereas normal phase LC at CAP of PPO renders oligomeric separation with respect to PEO block. The oligomeric separation with regard to PEO and PPO are coupled online (comprehensive 2D-LC) to reveal two-dimensional contour plots by unconventional 2D IC×IC (interaction chromatography) coupling. The study provides chemical composition mapping of both PEO and PPO, equivalent to combined molar mass and chemical composition mapping for several commercial poloxamers., (Copyright © 2016 Elsevier B.V. All rights reserved.)

This study for the first time demonstrates combined application of mixture experimental design and artificial neural networks (ANNs) in the solid dispersions (SDs) development. Ternary carbamazepine-Soluplus®-poloxamer 188 SDs were prepared by solvent casting method to improve carbamazepine dissolution rate. The influence of the composition of prepared SDs on carbamazepine dissolution rate was evaluated using d-optimal mixture experimental design and multilayer perceptron ANNs. Physicochemical characterization proved the presence of the most stable carbamazepine polymorph III within the SD matrix. Ternary carbamazepine-Soluplus®-poloxamer 188 SDs significantly improved carbamazepine dissolution rate compared to pure drug. Models developed by ANNs and mixture experimental design well described the relationship between proportions of SD components and percentage of carbamazepine released after 10 (Q10) and 20 (Q20) min, wherein ANN model exhibit better predictability on test data set. Proportions of carbamazepine and poloxamer 188 exhibited the highest influence on carbamazepine release rate. The highest carbamazepine release rate was observed for SDs with the lowest proportions of carbamazepine and the highest proportions of poloxamer 188. ANNs and mixture experimental design can be used as powerful data modeling tools in the systematic development of SDs. Taking into account advantages and disadvantages of both techniques, their combined application should be encouraged.

Thermotropic microenvironmental changes and the level of hydration in different microenvironments of pluronic F127 (PF127), (PEO106 PPO70 PEO106, average molar mass 13 000) in aqueous media have been studied using 1-naphthol, which is an ESPT fluorescent molecular probe. The appearance of 1-naphthol neutral form fluorescence in aqueous PF127 (10% w/v) solution indicates the ability of 1-naphthol to sense hydrophobic domains in micellar aggregations. There is a marked enhancement of the neutral form fluorescence at and above the gelation temperature (20 °C), which shows that the probe can accurately sense the sol-gel transition. In the temperature range of 10-40 °C, with increase in temperature there is a progressive enhancement of the neutral form fluorescence and the blue shift of the neutral and anionic form fluorescence; a decrease in the deprotonation rate constant (kpt) indicates that the water-polymer interfacial region is progressively dehydrated. Because kpt is related to the availability of proton-accepting water in the microenvironment of 1-naphthol, the reduction of kpt indicates progressive dehydration. The thermotropic response of the I1/I3 vibronic band ratio of pyrene-1-butyric acid fluorescence shows a progressive increase in the non-polarity of the interfacial domain with increasing temperature. The increase in non-polarity and the decrease of the hydration level are strongly correlated.

Microcapsules containing thyme oil were prepared by in situ polymerization, using melamine-formaldehyde prepolymer as a wall material and 3 different emulsifiers (pluronic F-127, tween 80, and sodium lauryl sulfate [SLS]). The general characteristics and release behavior of microcapsules, and their repellent effect against insects were investigated. The morphology of microcapsules using SLS was spherical shape with smooth surface. Microcapsules began to degrade at 150 °C. The particle size ranged from 1 to 10 μm and the loading efficiency of thyme oil was clearly affected by the emulsifier type. The highest loading efficiency appeared in microcapsules using SLS, which have good thermal resistance and smooth surface. The release rate of thyme oil from microcapsules was not only dependent on the storage temperature but also emulsifier type and microcapsules showed the sustained release properties for a long time. Diets, which were mixed with encapsulated thyme oil, expressed high insect repellent efficacy over 90% for 4 wk., (© 2013 Institute of Food Technologists®)

Pluronic F127/poly(aspartic acid) mixtures were investigated in dilute solutions by viscometry and dynamic light scattering. The two polymers were chosen due to well known applications in biomedical field, taking into account the final purpose (the use of the complex structure as drug delivery systems). The central item was to identify the possibility of complexation between the poly(carboxylic acid) and a non-ionic polymer and to investigate the conditions of the interpolymer complex formation. The ability of Pluronic F127 to form micelle is well known. Poly(aspartic acid), as a polycarboxylic acid with resemblance with polyacrylic acid, can act as dispersant, antiscalant, superabsorber, being also able to form micelles. Due to its functional groups, -COOH and -NH(2), poly(aspartic acid) can make physical and/or chemical bonds with other macromolecular compounds. The intrinsic viscosity and the dynamic light scattering data obtained for PLU/PAS mixtures at 25 °C have shown that interpolymer complex formation occurs around 1/1 wt. ratio between the two polymers., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Boswellia serrata gum resin extracts are used widely for the treatment of inflammatory diseases. However, very low concentrations in the plasma and brain were observed for the boswellic acids (1-6, the active constituents of B. serrata). The present study investigated the effect of phospholipids alone and in combination with common co-surfactants (e.g., Tween 80, vitamin E-TPGS, pluronic f127) on the solubility of 1-6 in physiologically relevant media and on the permeability in the Caco-2 cell model. Because of the high lipophilicity of 1-6, the permeability experiments were adapted to physiological conditions using modified fasted state simulated intestinal fluid as apical (donor) medium and 4% bovine serum albumin in the basolateral (receiver) compartment. A formulation composed of extract/phospholipid/pluronic f127 (1:1:1 w/w/w) increased the solubility of 1-6 up to 54 times compared with the nonformulated extract and exhibited the highest mass net flux in the permeability tests. The oral administration of this formulation to rats (240 mg/kg) resulted in 26 and 14 times higher plasma levels for 11-keto-β-boswellic acid (1) and acetyl-11-keto-β-boswellic acid (2), respectively. In the brain, five times higher levels for 2 compared to the nonformulated extract were determined 8 h after oral administration.

Polyrotaxanes (PR) are among the most studied interlocked molecules in the field of supramolecular chemistry. Cyclodextrin based polyrotaxanes (CD based PRs) are well-known to be difficult to analyze by mass spectrometry (MS). Nanoelectrospray (nanoESI) employed during mass spectrometry (MS) and tandem mass spectrometry (MS/MS) experiments turns out to be particularly useful to analyze these noncovalent assemblies. While ESI/nanoESI based spectra usually contain multicharged species which greatly complicate the interpretation, particularly for such complex mixtures analysis, the hyphenation with a high resolution analyzer such as Orbitrap could overcome this limitation. This Article reports efforts to achieve a detailed structural deciphering by nanoESI-MS and nanoESI-MS/MS of CD based PRs constituted of αCDs, unmodified or surrounded by 1 or 2 sulfation(s), which were threaded along polydisperse poly(ethylene oxide) α,ω-dipyrenyl chains. The described method is more sensitive and less sample consuming than a typical NMR experiment and in good agreement with size-exclusion chromatography (SEC) results. Moreover, as compared to MALDI-TOF MS analysis, all populations were presumably elucidated without discrimination effect. Therefore, this MS development allowed us to estimate the PR sample content with 16 to 35 ethylene oxide units, 1 to 5 αCDs threaded, and 0 to 10 sulfo groups grafted on the overall CDs. Finally, the method afforded the possibility to unambiguously attribute supramolecular architectures from 2276.0278 to 7767.8342 g·mol(-1) corresponding to poly[2]- to poly[6]rotaxanes.

A simple and sensitive high performance liquid chromatography (HPLC) method was developed to determine residual Pluronic F-68 (PF-68) in in-process samples of monoclonal antibody (MAb) preparations. The method permits the direct injection of proteinaceous samples after simple sample dilution and is able to quantitate as low as 50 mg/L of PF-68 in the presence of up to approximately 30 g/L of protein. The PF-68 molecule was separated on a restricted access reversed phase column using a step gradient and then measured by an evaporative light scattering detector (ELSD). The method was successfully applied to demonstrate PF-68 clearance in MAb purification processes. A modified colorimetric method using liquid-liquid extraction and cobalt thiocyanate to derivatize PF-68 is also described. The results obtained by both the HPLC and colorimetric methods were compared. In addition to its ease of use and simplicity, the HPLC method had better accuracy and higher throughput than the colorimetric method., (Copyright © 2011 Elsevier B.V. All rights reserved.)

We report here the potential of Pluronic tri-block copolymer micelles for the formulation of curcumin, a natural dietary compound having great therapeutic potential against many diseases including cancer. Two most commonly used Pluronic F127 and F68 were used for the formulation and analyzed for curcumin encapsulation efficiency and stability. The encapsulation of drug in micelle was highly dependent on drug-to-copolymer ratio. Pluronic F127 showed better encapsulation efficiency than Pluronic F68. In vitro release profile demonstrated slower and sustained release of curcumin from Pluronic micelles. The lyophilized form of the formulations exhibited good stability for long-term storage. The physical interaction of curcumin with Pluronic was evident by XRD analysis, UV-visible, fluorescence, and FT-IR spectroscopy. AFM study showed that the drug-encapsulated micelles were spherical in shape with diameters below 100 nm. The in vitro cytotoxicity of the drug formulations was investigated with HeLa cancer cells. Pluronic-encapsulated curcumin showed comparable anticancer activity with free curcumin.

Poloxamers (PXMs) are amphiphilic non-ionic block polymers commonly used in the cosmetic and pharmaceutical industries. In spite of the wide use of PXMs, few studies have dealt with the analysis of these polymers in pharmaceutical preparations. In this work, high-performance thin-layer chromatography (HPTLC) has been used to quantify both PXM-188 and PXM-407 in pharmaceutical preparations. The separation of these compounds was carried out using reverse phase HPTLC plates with a chloroform-methanol mixture as the mobile phase. Detection was performed densitometrically using the Dragendorff's reagent for the visualization of PXMs. Quality parameters were established, and the detection limits ranged from 24 to 47ng/spot. A good precision (day to day and run to run), with relative standard deviations <11.18%, was obtained. The proposed method was satisfactorily applied to the analysis of laboratory-made and commercial pharmaceutical products.

Aqueous solutions of polyrotaxanes consisting of poly(ethylene glycol) and methylated alpha-cyclodextrins (alpha-CD) were studied by means of differential scanning calorimetry (DSC), dynamic light scattering, and X-ray diffraction in order to investigate the effect of the degree of methylation on thermoresponsive behavior. Polyrotaxanes with a degree of methylation higher than 50% had a lower critical solution temperature (LCST) and showed reversible associations and dissociations in water. In the transmittance measurements, the cloud point of methylated polyrotaxanes (MePR) shifted to a lower temperature with an increase in the degree of methylation. The heating curve obtained by DSC for the nearly permethylated polyrotaxane showed one broad endothermic peak that was associated with the microcrystallization of methylated CDs by hydrophobic interactions. On the other hand, the DSC profiles for partially methylated polyrotaxanes had several endothermic peaks, indicating multiple phase transitions of the MePR solutions. The results imply that the thermal properties of the MePR-water system are significantly affected by not only the methyl groups on alpha-CDs but also by the remaining hydroxyl groups.

Block copolymers are increasingly being applied in areas such as transfection, membrane sealing, site-specific targeting, and bionanoengineering yet there is a relative paucity of assays available for simple, stable and reproducible colorimetric determination of copolymer concentration in solution. We have focused on improving the accuracy and reproducibility of a modified version of the Stewart biphasic colorimetric assay for quantitative determination of Pluronic (poloxamer) and Tetronic (poloxamine) macromolecules. The optimized assay achieved linear response ranges in chloroform for commonly used copolymers such as poloxamine 904 (20-300 microg/ml), poloxamine 908 (10-400 microg/ml), poloxamer 402 (20-400 microg/ml), and poloxamer 407 (10-400 microg/ml). Variation in the type of chlorinated solvent used significantly increased assay sensitivity, presumably through macromolecular reorientation, affording increased access for copolymer-ferrothiocyanate complexation. This was found to be optimally favored by the planar geometry of the solvent cis 1,2-dichloroethylene. For application to biological systems copolymer-protein interactions were for the first time determined and were found to be dependent on the fraction of hydrophobic constituents of the block copolymers and protein type. For instance serum albumin was found to interact with copolymers of low hydrophilic-lipophilic balance values and poly(propylene oxide) contaminants, whereas this interaction was not significant with the relatively hydrophilic IgG. In such systems the colorimetric assay directly determines the fraction of unbound (free) copolymer in the presence of proteins.

A high performance liquid chromatography (HPLC) method for Poloxamer 188 using size-exclusion chromatography (SEC) was developed and two different detection mechanisms, evaporative light scattering (ELSD) and electrospray ionization mass spectrometry (ESI-MS), were compared for their quantification capabilities in itraconazole formulation. Both detection techniques coupled with SEC separation were highly effective for the determination of Poloxamer 188, which is difficult to analyze by other common HPLC methods. As expected, ESI-MS detection provided sensitivity and selectivity superior to ELSD. But since the analyte is an excipient in the formulation, high sensitivity was not required and ELSD's simplicity and ruggedness made it more appropriate for routine analysis of this formulation.

Self-assembled multivalent pseudopolyrotaxanes, composed of lactoside-bearing cyclodextrin (CD) rings threaded on linear polyviologen polymers, have been introduced recently as flexible and dynamic neoglycoconjugates. In the course of this research, it was found that polyviologens are responsive to the Bradford assay, which is traditionally highly selective for proteins. The response of the pseudopolyrotaxanes to the Bradford assay was dependant on, and thus indicative of, the degree of threading of the CD rings onto the polyelectrolyte. The assay was then used to report on the threading and dethreading of native and lactoside-bearing alpha-CD rings onto and off of polyviologen chains, a phenomenon which demonstrates the utility of biochemical assays to address problems unique to supramolecular chemistry.

Poloxamers have been used as functional excipients in pharmaceutical products. They function as surfactants, emulsifying agents, solubilizing agents, dispersing agents, and in vivo absorbance enhancer. Despite their wide range of applications, limited analytical techniques have been reported in literature for characterizing poloxamers and few are targeted to quantify poloxamer contents in formulations with desired sensitivity and accuracy. In this paper, two distinct analytical methods for quantifying low levels of poloxamers in pharmaceutical formulations have been developed and optimized: a colorimetric method and a size exclusion chromatography method. The colorimetric method is based on the formation of a colored complex between poloxamers and cobalt(II) thiocyanate in aqueous medium, which has a maximum UV absorbance at 624 nm. The feasibility of this method is product specific. In this report, adequate specificity and sensitivity was demonstrated for only one of the several products tested. The size exclusion chromatography (SEC) method utilizes size exclusion columns with THF as mobile phase and refractive index detection. The SEC method provides a limit of quantitation (LOQ) of 0.005 mg/mL (0.0005%, w/w) and at least three orders of magnitudes of linear range. We applied the SEC method to pharmaceutical products containing 0.3-10% poloxamer 188 or poloxamer 407, such as Avapro, Neurontin, Sudafed and other developmental formulations. The results obtained with the SEC method agreed very well with literature and theoretical values with 97-102% recovery. The SEC method was proven to be widely applicable, accurate, precise and simple to use.

There is a need for safe and reversible occlusions during percutaneous endovascular procedures. Poloxamer 407 is a non-ionic surfactant with rapid reversible sol-gel transition behaviour. The safety and efficacy of this polymer as a temporary embolic agent was investigated. First, dissolution time after gelation of poloxamer was determined in an in vitro model. Then, transient poloxamer occlusion of renal and pulmonary arteries of seven dogs was followed by serial angiograms. Macroscopic and pathological changes were studied 1 week later. This experiment was repeated in similar arteries in one pig, and in auricular arteries of two rabbits. Poloxamer dissolution after in vitro polymerization was completed within 1-20 h, depending on concentrations. In vivo poloxamer 22% injections led to complete occlusion, followed by full recanalization within 10-90 min without complication. The only biochemical effect of poloxamer occlusions was transient elevation of triglyceride levels. There were no pathological abnormalities at 1 week. Poloxamer 407 could be used as an embolic material for temporary occlusions.

The drying of hydrogel films formed by Poloxamer 407 poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) amphiphilic block copolymer was investigated at various air relative humidity (RH) conditions ranging from 11 to 97%. Initially, the amount of water lost increased linearly with the drying time. After this linear region (stage I), a nonlinear behavior was observed (stage II). The drying rate increased with decreasing RH, thus greatly shortening the drying time. A decrease of the film thickness also shortened the drying time; however, the drying mechanism did not change. Three models for one-dimensional water diffusion were used to fit the experimental results at different RH conditions and film thicknesses. Model 1 assumes semi-infinite medium and constant diffusion coefficient, and fits very well the data in stage I of the drying process. The fitted water diffusion coefficient (D) is 5 x 10(-10) m(2)/s, whereas the effects of the RH are captured by a proportionality constant (alpha) that appears in the boundary condition. Model 2 considers a finite (constant) film thickness and captures the experimental observations over the whole drying period for the same D and alpha as in Model 1. The analytical solutions available for Models 1 and 2, used together with the experimentally derived model parameters D and alpha, allow for easy estimation of drying time and water loss from Poloxamer hydrogel films of various compositions and thicknesses and at different relative humidities. Numerical solutions for water diffusion under conditions of decreasing film thickness and diffusion coefficient being a function of concentration are also presented (Model 3). It becomes apparent from the fit of the data to the different models that the drying rate is more sensitive to the boundary condition at the film-air interface (represented by alpha) than to the diffusion in the film. It is notable that the alpha values obtained from the fits of the Poloxamer hydrogel drying rate are comparable to those obtained from drying of water films under the same experimental conditions., (Copyright 2004 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 93:1454-1470, 2004)

We have measured Raman spectra of collective O-H stretching vibration of water clusters in polyrotaxane and pseudopolyrotaxane aqueous solutions and the aqueous solutions of their constituent molecules. The intensities of the collective bands of water clusters in the polyrotaxane and pseudopolyrotaxane solutions were approximately equal to that of their solvents. On the other hand, those in the solutions of linear polymeric chains and cyclic molecules were smaller. These results indicate that the water molecules in the solvents cannot approach to interact with the hydrophobic parts of the constituent molecules sterically when the constituent molecules form the inclusion complexes. Thus, the polyrotaxane and pseudopolyrotaxane molecules are observed as inert in terms of molecular interaction with water, although the constituent molecules have hydrophobic parts in their structure.

The temperature sensitive properties of Pluronic F-127 (MW approximately 12600, PEO(98)-PPO(67)-PEO(98)), a block co-polymer or poloxamer, was used to control liposome-cell adhesion. When associated with liposomes, the PEO moiety of the block co-polymer is expected to inhibit liposome-cell adhesion. Liposomes were made using egg phosphatidylcholine and different mole% of Pluronic F-127. Size measurement of the liposomes at different temperatures, in the presence and absence of Pluronic F-127, shows significant reduction in the size of multilamellar vesicles, at higher temperatures, by the Pluronic molecules. Negative stain electron microscopy study showed the presence of individual molecules and micelles of Pluronic, respectively at temperatures below and above the critical micellar temperature (CMT). Measurement of the surface associated Pluronics indicated that they associated with liposomes when the sample was heated above the Pluronic CMT, and dissociated from liposomes when cooled below the CMT. Attachment of the Pluronic containing liposomes to CHO cells was inhibited at temperatures above the CMT, but not at temperatures below CMT, indicating that temperature-sensitive control of liposome-cell adhesion is achieved.

Poloxamers are polyethylene-polypropylene glycol linear co-polymers. A simple matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) method has been developed for the determination of the average molecular weight of poloxamers. The molecular mass of five standard poloxamers determined by MALDI closely corresponds to that specified by the manufacturers, and no mass distribution effects were observed. Quantitation of distributions based on the molecular mass envelope using electrospray (ES) ionization was unsuccessful. To overcome this problem, quantitation was based on fragment ions (m/z 45 and 59) which gave reproducible signals using a very high orifice voltage ( approximately 200 eV). Poloxamer concentrations were determined accurately with a good linear response using the standard addition method. We believe that the use of very small fragment ions for quantitation of polymers may become a widely applicable general technique., (Copyright 2001 John Wiley & Sons, Ltd.)

Purpose: Previous work on the encapsulation of proteins and antigens in poly(lactic-co-glycolic acid) (PLGA) microspheres has led to the conclusion that microencapsulated antigens are frequently inactivated due to their interaction with the polymer. To improve the compatibility of the antigen with the polymer, we have devised a novel microencapsulated system consisting of a blend of PLGA 50:50 and poloxamer 188 (Pluronic F68) and applied it to the delivery of tetanus antigen., Methods: Tetanus toxoid was encapsulated in microspheres containing different amounts of poloxamer using an anhydrous procedure based on an oil-in-oil solvent extraction process. The compatibility of the polymers was studied by Fourier transform infrared (FT-IR) spectroscopy. Microspheres were assayed in vitro and in vivo for their ability to deliver active antigen for extended periods of time., Results: Analysis by FT-IR spectroscopy evidenced the miscibility of both polymers by a hydrogen bonding mechanism. In vitro release studies revealed that microspheres containing poloxamer released antigenically active TT, in a pulsatile manner, for up to 50 days. In addition, it was observed that the intensity and duration of the pulses were dependent on both poloxamer content and TT loading in the microspheres. The in vivo evaluation of this new system showed that the neutralizing antibodies elicited by the TT encapsulated in poloxamer-PLGA microspheres were considerably higher and more prolonged than those obtained after administration of the aluminum phosphate-adsorbed toxoid., Conclusions: These results indicate the importance of devising new microencapsulation approaches specially adapted for preserving the activity of protein antigens incorporated within PLGA microspheres.