Search

The quantum Hall effect can be substantially affected by interfacial coupling between the host two-dimensional electron gases and the substrate, and has been predicted to give rise to exotic topological states. Yet the understanding of the underlying physics and the controllable engineering of this interaction remains challenging. Here we demonstrate the observation of an unusual quantum Hall effect, which differs markedly from that of the known picture, in graphene samples in contact with an antiferromagnetic insulator CrOCl equipped with dual gates. Two distinct quantum Hall phases are developed, with the Landau levels in monolayer graphene remaining intact at the conventional phase, but largely distorted for the interfacial-coupling phase. The latter quantum Hall phase is even present close to the absence of a magnetic field, with the consequential Landau quantization following a parabolic relation between the displacement field and the magnetic field. This characteristic prevails up to 100 K in a wide effective doping range from 0 to 1013 cm−2., This dataset contains electrical transport tests, which are related to the manuscript of "Quantum Hall phase in graphene engineered by interfacial charge coupling".

Seeding 2D crystals Small, single crystals are often used to direct the growth of larger, bulk single crystals. Xu et al. modified these methods to grow single-crystal films of a two-dimensional (2D) semiconductor, 2H molybdenum ditelluride (2H MoTe 2 ), on an amorphous glass surface. After coating the wafer with a 1T′ MoTe 2 film, a small 2H MoTe 2 crystallite was placed on the wafer. The wafer was capped with an alumina film, except for a small hole above the seed region that allowed entry of additional tellurium during the heating process that drove the phase transition and epitaxial growth of 2H MoTe 2 . Science , this issue p. 195

Exciton polaritons, hybrid quasiparticles with part-light part-matter nature in semiconductor microcavities, are extensively investigated for striking phenomena such as polariton condensation and quantum emulation. These phenomena have recently been discovered in emerging lead halide perovskites at elevated temperatures up to room temperature. For advancing these discoveries into practical applications, one critical requirement is the realization of electrically pumped exciton-polaritons. However, electrically pumped polariton light-emitting devices with perovskites have not yet been achieved experimentally. Here, we devise a new method to combine the device with the microcavity and report the first halide perovskite polariton light-emitting device. Specifically, the device is based on a CsPbBr3 capacitive structure, which can inject the electrons and holes from the same electrode, conducive to the formation of excitons and simultaneously maintaining the high quality of the microcavity. In addition, highly polarization-selective polariton emissions have been demonstrated due to the optical birefringence in the CsPbBr3 microplate. This work paves the way for realizing practical polaritonic devices such as high-speed light-emitting devices for information communications and inversionless electrically pumped lasers based on perovskites., 13 pages, 4 figures

Because of atomic thickness and non-zero band gap, two-dimensional (2D) transition-metal dichalcogenides (TMDCs) have become promising candidates for post-silicon nanoelectronic materials. In the p...

2D van der Waals (vdW) transition-metal oxyhalides with low symmetry, novel magnetism, and good stability provide a versatile platform for conducting fundamental research and developing spintronics. Antiferromagnetic FeOCl has attracted significant interest owing to its unique semiconductor properties and relatively high Néel temperature. Herein, good-quality centimeter-scale FeOCl single crystals are controllably synthesized using the universal temperature-oscillation chemical vapor transport (TO-CVT) method. The crystal structure, bandgap, and anisotropic behavior of the 2D FeOCl are explored in detail. The absorption spectrum and electrical measurements reveal that 2D FeOCl is a semiconductor with an optical bandgap of ≈2.1 eV and a resistivity of ≈10

Materials with a quasi-one-dimensional stripy magnetic order often exhibit low crystal and magnetic symmetries, thus allowing the presence of various energy coupling terms and giving rise to macroscopic interplay between spin, charge, and phonon. In this work, we performed optical, electrical and magnetic characterizations combined with first-principles calculations on a van der Waals antiferromagnetic insulator chromium oxychloride (CrOCl). We detected the subtle phase transition behaviors of exfoliated CrOCl under varying temperature and magnetic field and clarified its controversial spin structures. We found that the antiferromagnetism and its air stability persist down to few-layer samples, making it a promising candidate for future 2D spintronic devices. Additionally, we verified the magnetoelastic coupling effect in CrOCl, allowing for the potential manipulation of the magnetic states via electric field or strain. These virtues of CrOCl provide us with an ideal platform for fundamental research on spin-charge, spin-phonon coupling, and spin-interactions.

A promising approach to the next generation of low-power, functional, and energy-efficient electronics relies on novel materials with coupled magnetic and electric degrees of freedom. In particular, stripy antiferromagnets often exhibit broken crystal and magnetic symmetries, which may bring about the magnetoelectric (ME) effect and enable the manipulation of intriguing properties and functionalities by electrical means. The demand for expanding the boundaries of data storage and processing technologies has led to the development of spintronics toward two-dimensional (2D) platforms. This work reports the ME effect in the 2D stripy antiferromagnetic insulator CrOCl down to a single layer. By measuring the tunneling resistance of CrOCl on the parameter space of temperature, magnetic field, and applied voltage, we verified the ME coupling down to the 2D limit and unraveled its mechanism. Utilizing the multi-stable states and ME coupling at magnetic phase transitions, we realize multi-state data storage in the tunneling devices. Our work not only advances the fundamental understanding of spin-charge coupling but also demonstrates the great potential of 2D antiferromagnetic materials to deliver devices and circuits beyond the traditional binary operations., Comment: 8 pages, 3 figures

Two-dimensional magnetic semiconductors provide a platform for studying physical phenomena at atomically thin limit, and promise magneto-optoelectronic devices application. Here, we report light helicity detectors based on graphene-CrI3-graphene vdW heterostructures. We investigate the circularly polarized light excited current and reflective magnetic circular dichroism (RMCD) under various magnetic fields in both monolayer and multilayer CrI3 devices. The devices exhibit clear helicity-selective photoresponse behavior determined by the magnetic state of CrI3. We also find abnormal negative photocurrents at higher bias in both monolayer and multilayer CrI3. A possible explanation is proposed for this phenomenon. Our work reveals the interplay between magnetic and optoelectronic properties in CrI3 and paves the way to developing spin-optoelectronic devices.

MnBi_{2}Te_{4}, an intrinsic magnetic topological insulator, has shown layer-number-correlated magnetic and topological phases. More interestingly, in the isostructural material MnSb_{2}Te_{4}, the antiferromagnetic (AFM) and ferromagnetic (FM) states have been both observed in the bulk counterparts, which are also predicted to be topologically nontrivial. Revealing the layer-number-dependent magnetic properties of MnSb_{2}Te_{4} down to a single septuple layer (SL) is of great significance for exploring the topological phenomena. However, this is still elusive. Here, using the polar reflective magnetic circular dichroism spectroscopy, both the A-type AFM and FM behaviors are observed and comprehensively studied in MnSb_{2}Te_{4} down to a single SL limit. In A-type AFM MnSb_{2}Te_{4} flakes, an obvious odd-even layer-number effect is observed. An additional surface spin-flop (SSF) transition occurs in even-SL flakes with the number of layers larger than 2. With the AFM linear-chain model, we identify that the even-SL flakes stabilize in a collinear state between the SSF transition and the spin-flop transition due to their appropriate energy ratio between the magnetic-field-scale anisotropy and interlayer interaction. In FM MnSb_{2}Te_{4} flakes, we observe very different magnetic behaviors with an abrupt spin-flipping transition and very small saturation fields, indicating a weakened interlayer interaction. By revealing the rich magnetic states of few-SL MnSb_{2}Te_{4} on the parameter space of the number of layers, external magnetic field, and temperature, our findings pave the way for further quantum transport studies of few-SL MnSb_{2}Te_{4}.

Quantum Hall effect (QHE), the ground to construct modern conceptual electronic systems with emerging physics, is often much influenced by the interplay between the host two-dimensional electron gases and the substrate, sometimes predicted to exhibit exotic topological states. Yet the understanding of the underlying physics and the controllable engineering of this paradigm of interaction remain challenging. Here we demonstrate the observation of an unusual QHE, which differs markedly from the known picture, in graphene samples in contact with an anti-ferromagnetic insulator CrOCl equipped with dual gates. Owing to the peculiar interfacial coupling, Landau levels in monolayer graphene remain intact at negative filling fractions, but largely deviated for the positive gate-doping range. The latter QHE phase even presents in the limit of zero magnetic field, with the consequential Landau quantization following a parabolic relation between the displacement field $D$ and the magnetic field $B$. This characteristic prevails up to 100 K in a sufficiently wide effective doping range from 0 to 10$^{13}$ cm$^{-2}$. Our findings thus open up new routes for manipulating the quantum electronic states, which may find applications in such as quantum metrology., Comment: 11 pages, 5 figures

The integration of two-dimensional (2D) van der Waals semiconductors into silicon electronics technology will require the production of large-scale, uniform, and highly crystalline films. We report a route for synthesizing wafer-scale single-crystalline 2H molybdenum ditelluride (MoTe

Quantum interference gives rise to the asymmetric Fano resonance line shape when the final states of an electronic transition follow within a continuum of states and a discrete state, which has significant applications in optical switching and sensing. The resonant optical phenomena associated with the Fano resonance have been observed by absorption spectra, Raman spectra, transmission spectra, etc., but have rarely been reported in photoluminescence (PL) spectroscopy. In this work, we performed spectroscopic studies on layered chromium thiophosphate (CrPS4), a promising ternary antiferromagnetic semiconductor with PL in the near-infrared wavelength region and observed a Fano resonance when CrPS4 experiences phase transition into the antiferromagnetic state below the Neel temperature (38 K). The photoluminescence of the continuum states results from the d band transitions localized at Cr3+ ions, whereas the discrete state is formed by an impurity level, the electronic transition of which is enabled by symmetry breaking. Our findings provide insights into the photon-emitting coherent electronic transitions of CrPS4 and their connection to the magnetism-related broken symmetry.

For quantum photonic applications, such as quantum communication, optical quantum information processing, and metrology, solid-state sources of single-photon emitters are highly needed. Recently, single-photon emitters in two-dimensional (2D) van der Waals materials have attracted tremendous attention because of their atomic thickness, allowing for high photon extraction efficiency and easy integration into photonic circuits. In particular, a defect hosted by 2D hexagonal boron nitride (hBN) is expected to be a promising candidate for next-generation single-photon sources due to its chemical and thermal stability and high brightness at room temperature. Here, we report an effective method for generating single-photon emission in mechanically exfoliated hBN flakes by annealing in a carbon-rich environment. The one-step annealing in a mixed atmosphere (Ar:CH4:H2 = 15:5:1) greatly increases the single-photon emitter density in hBN. The resulting single-photon emission shows high stability and brightness. Our results provide an effective method for generating room-temperature single-photon emitters in 2D hBN.

Wavy-structured two-dimensional (2D) photonic crystal (PC) is possessed of isofrequency contours of rectangular form and is therefore capable of self-collimation. The self-guiding phenomenon is studied by calculating the intensity of the electromagnetic waves through slabs of the PC. Superlensing based on self-collimation of wavy-structured 2DPC is also investigated by analyzing the field pattern where point source is used. The full width at half maximum of image point is calculated to be 0.28λ. The position of the image is always located in the near-field domain of the slab. Image quality degrades gradually as the slab thickness or the source-slab distance increases.