Search

Aiming at the engineering problem that 5G base station antenna is difficult to locate efficiently in complex electromagnetic environment, a two-stage positioning method of 5G base station antenna substation is proposed, which considers signal path loss and antenna RF radiation. Firstly, the path loss solution model of the 5G base station antenna signal in the substation is established, and the RF radiation solution model generated by the coupling excitation of 5G high-frequency electromagnetic wave and the metal shell of the electrical equipment is constructed based on the big element physical optics method. Secondly, combining the advantages of particle swarm optimization (PSO) and interior point algorithm, the antenna positioning method considering path loss and RF radiation is constructed. Among them, in the first stage, the minimum loss of 5G signal path in the substation is taken as the goal, and the antenna stations in the substation are searched globally to get the optimal pre-selected position. In the second stage, the antenna position is calibrated according to the pre-selected position, so that the interference of RF radiation is minimized, and the final position is output. Finally, a 500 kV 5G substation in Henan Province was taken as the simulation object. Compared with the original scheme, the simulation results ensured the minimum 5G path loss in the substation and took into account the electromagnetic compatibility of the equipment in the substation. The effectiveness of the location strategy for maintaining the safe operation of the substation is verified, and it can provide a reference for the 5G base station antenna positioning project of the substation. Article highlights: Considering the influence of 5G high-frequency electromagnetic wave on the electrical equipment in the substation, the positioning accuracy of 5G base station antenna in the substation is improved. The large area physical optics method can improve the calculation time and accuracy of radiofrequency radiation field intensity Combining the advantages of particle swarm optimization and interior point method, it can effectively avoid the problem of local optimal solution of location selection The simulation results show that the proposed method not only improves the location accuracy of 5G base station antennas in substations, but also applies to 5G base station antennas in more complex engineering environments [ABSTRACT FROM AUTHOR]

Cirrus clouds have an extensive global coverage and their high altitude means they play a critical role in the atmospheric radiation balance. Hexagonal ice plates and columns are two of the most abundant species present in cirrus and yet there remains a poor understanding of how surface roughness affects the scattering of light from these particles. To advance current understanding, the scattering properties of hexagonal ice plates with varying surface roughness properties are simulated using the discrete dipole approximation and the parent beam tracer physical–optics method. The ice plates are chosen to have a volume-equivalent size parameter of 2 π r / λ = 60 , where r is the radius of the volume-equivalent sphere, and a refractive index n = 1.31 + 0 i at a wavelength λ = 0.532 µm. The surface roughness is varied in terms of a characteristic length scale and an amplitude. The particles are rotated into 96 orientations to obtain the quasi-orientation averaged scattering Mueller matrix and integrated single-scattering parameters. The study finds that the scattering is largely invariant with respect to the roughness length scale, meaning it can be characterised solely by the roughness amplitude. Increasing the amplitude is found to lead to a decrease in the asymmetry parameter. It is also shown that roughness with an amplitude much smaller than the wavelength has almost no effect on the scattering when compared with a pristine smooth plate. The parent beam tracer method shows good agreement with the discrete dipole approximation when the characteristic length scale of the roughness is several times larger than the wavelength, with a computation time reduced by a factor of approximately 500. [ABSTRACT FROM AUTHOR]

The evaluation of the focal field of Cassegrain antennas is crucial for the design and optimization of the complex feeds in quasi-optical systems. However, employing traditional physical optics methods generates high computational complexity and is inefficient. An accurate and efficient calculation method of Cassegrain antennas' focal fields that involves a range of incidence angles is proposed, which integrates ray tracing and vector diffraction integration (RT-VDI) theories. It can calculate the focal field in any given or predefined incident direction, not limited to the case of axial incidence. In addition, the use of the equivalent parabolic theory greatly simplifies the process of integral calculation. Moreover, ray tracing and integration operations are executed upon the calculation of the reflector to further improve efficiency. Numerical examples are presented to demonstrate the accuracy and efficiency of the proposed method. [ABSTRACT FROM AUTHOR]

This paper presents the theoretical fundamentals, prerequisites for creation, and peculiarities of modeling a new method for determining the refractive index of biological tissues. The method uses a mirror ellipsoid of revolution as an optical element to ensure total internal reflection phenomena. This paper thoroughly analyzes the differences in the refractive index of healthy and pathological tissues on a biometric diagnostic basis. The analysis is used to model the measurement setup's parameters. This paper also considers various methods of determining the refractive index of biological tissues based on different principles of physical optics, such as interferometry, refractometry, ellipsometry, and goniophotometry. It systematizes typical optical elements of total internal reflection that can be used in goniophotometry. It justifies the selection of the element base for the goniometric installation based on the ellipsoidal reflector method. A simulation of the installation operation was carried out for various parameters of the ellipsoidal reflector, ensuring the measurement of the biological tissue refractive index from 1.33 to 1.7. This paper also proposes a constructive solution for manufacturing an ellipsoidal reflector of the required configuration. [ABSTRACT FROM AUTHOR]

In the field of radar, deep learning techniques have shown considerably superior performance over traditional classifiers in detecting and classifying targets. However, acquiring sufficient training data for deep learning applications is often challenging and time consuming. In this study, we propose a technique for acquiring training data efficiently using a combination of synthesized data and measured background data. We utilized graphics processing unit (GPU)-based physical optics methods to obtain the backscattered field of moving targets. We then generated a virtual dataset by mixing the synthesized target signal with the background signal real data. Subsequently, we trained a convolutional neural network using the virtual dataset to identify three different classes--Bird, Drone, and Background--from a range-Doppler map. When tested using the measurement data, the trained model achieved an accuracy of over 90%, demonstrating the effectiveness of the proposed method in acquiring training data for radar-based deep learning applications. [ABSTRACT FROM AUTHOR]

For the application of vortex electromagnetic (EM) beams in practical detection scenes, the scattering characteristics of electrically large arbitrarily shaped targets illuminated by an off-axis Laguerre–Gaussian (LG) vortex beam are investigated and compared to the on-axis incidence case. The vector potential method is used to extract the electric and magnetic field components of the LG beam in different polarization states. The physical optics algorithm is adopted to calculate the scattering fields of four typical targets with the shape of a sphere, NASA almond, blunt cone, and blade model. The results revealed that as the beam center offset and the topological charge of the incident vortex beam increase, the scattering field distorts, and the obvious orbital angular momentum (OAM) spectrum mixing occurs. In addition, OAM spectrum aliasing occurs for asymmetric targets, even at on-axis incidence. These results elucidate the mechanism of vortex EM scattering and provide a reference for applying vortex beams for target detection and recognition. [ABSTRACT FROM AUTHOR]

This Tutorial introduces structural color in fruits as a phenomenon of diverse optical materials. Originally best known in abiotic materials and animals, structural colors are being increasingly described in plants. Structural colors have already inspired a variety of useful products, and plants are especially attractive as models to develop new bioinspired technologies thanks to the comparative ease of working with them compared with animal systems. Already, human-engineered structural colors modeled after plant cellulose-based architectures have shown promising applications in colorants and sensors. However, structural colors include a far broader group of materials and architectures beyond cellulose. Understanding the new and diverse structures that have recently been described in plants should provoke research into new bioinspired products based on plant optical structures and biomaterials. In this Tutorial, we focus on fruits as new structures have recently been discovered, leading to new opportunities for bioinspired technologies. We bring together a review of optical structures found in fruits from a physical optics perspective, with a consideration of each structure as an opportunity in bioinspired and biomimetic design. [ABSTRACT FROM AUTHOR]

Optical vortex lattices (OVLs) with diverse modes show potential for a wide range of applications, such as high-capacity optical communications, optical tweezers, and optical measurements. However, vortices in typical regulated OVLs often exhibit irregular shapes, such as being narrow and elongated. The resulting increase in asymmetry negatively impacts the efficiency of particle trapping. Additionally, the vortex radii expand with an increase in topological charge (TC), limiting the TC value of the vortices and hindering their ability to fully utilize orbital angular momentum (OAM). Herein, we propose an alternative approach to custom OVLs using off-axis techniques combined with amplitude modulation. Amplitude modulation enables the precise generation of an OVL with perfect vortex properties, known as a perfect off-axis OVL. Further, the number of vortices in the perfect off-axis OVL, the off-axis distances, and the TC can be freely modulated while maintaining a circular mode. This unique OVL will promote new applications, such as the complex manipulation of multi-particle systems and optical communication based on OAM. [ABSTRACT FROM AUTHOR]

Bistatic radar experiments have been used to study surface characteristics of extra-terrestrial bodies in the Solar System, including the Moon, Venus, Mars, and Titan. This paper proposes a 3D model to characterize the scattered field of a gaussian rough surface on an extra-terrestrial body for an orbital bistatic radar configuration. Specifically, this model will investigate how the variability of surface roughness impacts the spectral broadening of the received signal using physical optics approximations and ray tracing on a surface model using a facet approach with Gaussian properties. A linear relationship between spectral broadening of the signal and surface roughness was found. This relationship is in line with results obtained by commonly used analytical models for bistatic radar on planetary surfaces. [ABSTRACT FROM AUTHOR]

To overcome the shortcomings of traditional scattering evaluation methods in near-field scattering prediction, a novel fast scattering calculation algorithm suitable for a near-field region is proposed in this paper. Based on physical optics, combined with locally modified approximate Green's function, the integral expressions of near-field electromagnetic scattering radiated by a plane wave and a dipole source are derived in a frequency domain. The simulation results show that the modified algorithm not only retains the simplicity and efficiency of the traditional code, but also can be directly used for near-field scattering prediction. [ABSTRACT FROM AUTHOR]

The capability of the first strike is crucial in the modern battlefield. An important parameter is the radar signature or Radar Cross Section (RCS) of a weapon system, such as a fighter aircraft, a warship, or a missile, affecting the range at which this weapon system would be detected as a target by an enemy radar. If the attacker is detected too late, there will be minimal time for the defender to react, possibly not sufficient to counter the threat. The RCS of a weapon system is considered generally as classified information. However, it can be measured at a suitable measurement test range, if that weapon system is available. Otherwise, it can be predicted with the help of computational electromagnetics. Concerning the second approach, the following procedure was recently proposed: construction of a three-dimensional model of a target, based on available images and any relevant data, and then computation of the target RCS, with the Physical Optics approximative method. In the present approach, this procedure is applied to an anti-ship cruise missile in order to compute its RCS. Finally, the expected detection range for various naval radars is calculated. [ABSTRACT FROM AUTHOR]

The field of geometrical optics features a broad knowledge base concerning conceptual learning difficulties and student conceptions. However, in contrast to other areas of physics, no widely used standard test instrument exists to assess middle school students' conceptual knowledge of geometrical optics. This is even more true for other areas of the electromagnetic spectrum. For this reason, a concept test was developed for an intervention study to collect preconceptions about visible light as well as preconceptions about infrared radiation in the subject area of reflection and transmission. A pilot study with 108 middle school students preceded final revisions and implementation in the main study of 820 learners aged 12–16. The measurement model is presented for the developed concept test with the subscales 'preconceptions and knowledge about reflection and transmission in visible optics', 'preconceptions and knowledge about reflection and transmission in infrared optics' and 'applied knowledge on reflection and transmission in visible and infrared optics'. The results show that the concept test validly captures the development of preconceptions and knowledge regarding specific aspects of reflection and transmission of the part of the electromagnetic spectrum from 3 µm to 380 nm. [ABSTRACT FROM AUTHOR]

Cirrus clouds often contain numerous hollow ice crystals, which are distinct in scattering properties from solid ice crystals, and will be challenging to microphysical retrieval and radiative forcing assessment. Currently, hollow ice crystals have not been observed by remote sensing methods, and the estimation of their hollowness is a complex task. To address this issue, the Mixed Modal Hollow Columns (MMHC) model for hollow ice crystals is introduced, and its backscattering properties are computed using the physical optics approximation method. Through comparison with spaceborne lidar observations, we identify a specific type of cirrus associated with the MMHC model for the first time. The visible optical depth of this cirrus is less than or equal to 0.1, and the temperature is between −60 and −40°C. The MMHC characteristic cirrus clouds are prevalent in middle and high latitudes but less comm+on in low latitudes. They exhibit distinct patterns in terms of sea and land distribution as well as seasonal variation. Plain Language Summary: Cirrus clouds typically form at altitudes exceeding 6 km and consist of non‐spherical ice crystals, each with unique optical properties affecting the earth's radiation balance through scattering and absorption. Notably, these crystals include hollow formations, which are distinct in scattering properties from their solid counterparts. The coexistence of hollow and solid ice crystals presents challenges in accurately inverting ice crystal morphology in remote sensing and evaluating radiation properties in climate models. To address these complexities, we propose a MMHC model. Through analysis of spaceborne lidar observational data, we identify characteristic cirrus clouds associated with such type of ice crystals and study the global distribution and seasonal distribution of this kind of cirrus clouds. Key Points: A Mixed Modal Hollow Columns model is formulated to characterize the presence of hollow ice crystals in cirrus cloudsFor the first time, hollow characteristic cirrus clouds are observed using spaceborne lidarHollow characteristic cirrus clouds exhibit distinct global and seasonal distribution variations [ABSTRACT FROM AUTHOR]

Single-solution-based optimization algorithms are computationally cheap yet powerful methods that can be used on various optimization tasks at minimal processing expenses. However, there is a considerable shortage of research in this domain, resulting in only a handful of proposed algorithms over the last four decades. This study proposes the Prism Refraction Search (PRS), a novel, simple yet efficient, single-solution-based metaheuristic algorithm for single-objective real-parameter optimization. PRS is a physics-inspired algorithm modeled on a well-known optimization paradigm in ray optics arising from the refraction of light through a triangular prism. The key novelty lies in its scientifically sound background that is supported by the well-established laws of physical optics. The proposed algorithm is evaluated on several numerical objectives, including 23 classical benchmark functions, the CEC-2017 test suite, and five standard real-world engineering design problems. Further, the results are analyzed using standard statistical tests to prove their significance. Extensive experiments and comparisons with state-of-the-art metaheuristic algorithms in the literature justify the robustness and competitive performance of the PRS algorithm as a lightweight and efficient optimization strategy. [ABSTRACT FROM AUTHOR]

Synchrotron light sources can provide the required spatial coherence, stability and control to support the development of advanced lithography at the extreme ultraviolet and soft X-ray wavelengths that are relevant to current and future fabricating technologies. Here an evaluation of the optical performance of the soft X-ray (SXR) beamline of the Australian Synchrotron (AS) and its suitability for developing interference lithography using radiation in the 91.8 eV (13.5 nm) to 300 eV (4.13 nm) range are presented. A comprehensive physical optics model of the APPLE-II undulator source and SXR beamline was constructed to simulate the properties of the illumination at the proposed location of a photomask, as a function of photon energy, collimation and monochromator parameters. The model is validated using a combination of experimental measurements of the photon intensity distribution of the undulator harmonics. It is shown that the undulator harmonics intensity ratio can be accurately measured using an imaging detector and controlled using beamline optics. Finally, the photomask geometric constraints and achievable performance for the limiting case of fully spatially coherent illumination are evaluated. [ABSTRACT FROM AUTHOR]

This paper illustrates an interferometric inverse synthetic aperture radar based on three‐dimensional imaging and rotational velocity estimation from a multistatic setup with three ground‐based radars with non‐orthogonal baselines. The radar backscattering along the orbit is simulated based on physical optics approximation. The paper illustrates a novel shape‐dependent and rotation‐invariant feature called normalised eigenvalues for classification. A database of interferometric point clouds is generated using radar back scattering at different aspect angles and classified using various classification algorithms. The classification accuracy at varying SNR levels was evaluated using Monte Carlo simulations. [ABSTRACT FROM AUTHOR]

Objective: The purpose of the study is to analyze the essence of the attribution and description of antique and historical bladed weapons. The methods on which the expert relies in the attributive description are analyzed. The phasing of the descriptive part of the design of bladed weapons is considered. The categorization of the state of preservation and the degree of «good» preservation of bladed weapons are highlighted as a benchmark for comparison. The main goal is the formation of a unified vision among experts and connoisseurs of cold bladed weapons in the methodological base, the use of names and a competent description of structural details with the definition of dimensional characteristics. The results of the research will contribute to objective analysis among experts in the process of attribution and description of antique and historical bladed weapons. The research methodology is based on methods of analysis and synthesis. Structural-comparative and comparative-historical methods were also used. To systematize and assess the representativeness in the disclosure of the topic of published sources, source study methods of bibliographic heuristics, classification and systematization were used. Key findings: 1. The task of an art historian - an expert operating with cultural values is to acquire theoretical and practical skills based on the fundamentals of physical and applied optics, non-destructive research methods, as well as knowledge in understanding research processes, including creation and existence in description and attribution, collectible edged weapons, as well as analysis of scientific publications and archival sources when conducting art criticism examination for cultural value. 2. The process of attributing bladed weapons is a step-by-step cycle, where the expert is guided by a comparative analysis, in combination using analysis of marks and factory marks, study of inscriptions on bladed weapons, heraldic, stylistic, technological and chemical analysis. 3. In the description of antique and historical bladed weapons, the expert uses the terminology of the structural parts of bladed weapons, and also shows the main variability in the design of blades and sheaths. An expert in the process of describing antique and historical bladed weapons determines their physical state of preservation. [ABSTRACT FROM AUTHOR]

In this study, we obtained the intensity and orbital angular momentum (OAM) spectral distribution of the scattering fields of vortex electromagnetic beams illuminating electrically large targets composed of different materials. We used the angular spectral decomposition method to decompose a vortex beam into plane waves in the spectral domain at different elevations and azimuths. We combined this method with the physical optics algorithm to calculate the scattering field distribution. The OAM spectra of the scattering field along different observation radii were analyzed using the spiral spectrum expansion method. The numerical results indicate that for beams with different parameters (such as polarization, topological charge, half-cone angle, and frequency) and targets with different characteristics (such as composition), the scattering field intensity distribution and OAM spectral characteristics varied considerably. When the beam parameters change, the results of scattering from different materials show similar changing trends. Compared with beams scattered by uncoated metal and dielectric targets, the scattering field of the coating target can better maintain the shape and OAM mode of beams from the incident field. The scattering characteristics of metal targets were the most sensitive to beam-parameter changes. The relationship between the beam parameters, target parameters, the scattering field intensity, and the OAM spectra of the scattering field was constructed, confirming that the spiral spectrum of the scattering field carries the target information. These findings can be used in remote sensing engineering to supplement existing radar imaging, laying the foundation for further identification of beam or target parameters. [ABSTRACT FROM AUTHOR]

Copyright of Laser Technology is the property of Gai Kan Bian Wei Hui and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The M × N port wavelength-selective switch (WSS) is a crucial device used for Reconfigurable Optical Add/Drop Multiplexors and optical switching nodes in optical communication systems. The primary function of an M × N port WSS is to simultaneously transmit and switch multiple input optical signals from input fiber ports to output fiber ports through spatial light coupling. The port array module in a WSS that is responsible for coupling the spatial beam with the fiber determines the important parameters of the M × N port WSS, such as the number of input/output ports and insertion loss. In this paper, VirtualLab Fusion software 2023.1 (Build 1.558), as a powerful physical optics simulation tool, is used to design and optimize a silicon micro-lens array that can achieve the high-precision coupling of a fiber array with a pitch of 1143 μm. Finally, the designed micro-lens is manufactured and experimentally demonstrates its good beam focusing ability with a 3 dB insertion loss. The designed micro-lens array coupling system, which delivers 28 focused spots of approximately 1mm in size (the beam has a 1 / e 2 diameter) after transmitting a distance of around 300 mm, effectively extends the number of WSS ports. This design method of the micro-lens array significantly amplifies the port count of the M × N port wavelength-selective switch, effectively expanding it to encompass an impressive 28 × 28 ports. [ABSTRACT FROM AUTHOR]

In this paper, we introduce Riemannian warped product map as a generalization of warped product isometric immersion and Riemannian warped product submersion with examples and obtain some characterizations. First, we define Riemannian warped product map and find conditions for a Riemannian map to be Riemannian warped product map. We show that Riemannian warped product map is a composition of Riemannian warped product submersion followed by warped product isometric immersion locally. In addition, we show that Riemannian warped product map satisfies the generalized eikonal equation which is a well known bridge between geometrical and physical optics. We also find necessary and sufficient conditions for the fibers, range space of the derivative map of Riemannian warped product map and horizontal distributions to be totally geodesic and minimal. Further, we give some fundamental geometric properties for the study of such smooth maps. Precisely, we construct Gauss formula (second fundamental form), Weingarten formula and tension field. We obtain necessary and sufficient conditions for a Riemannian warped product map to be totally geodesic, harmonic and umbilical. Comparatively, we analyse the obtained results with the existing results for a Riemannian map between Riemannian manifolds. [ABSTRACT FROM AUTHOR]

This paper proposes a novel incremental theory of diffraction (ITD) formulation to calculate the fringe field from a wedge characterized by impedance surfaces and arbitrary exterior angles. The ITD formula was originally based on the Fourier transform pair relationship between the solution for the canonical wedge problem and incremental field contribution. However, this procedure can be utilized to report the ITD formula only for planar and half-planar impedance surfaces. Therefore, this paper develops a heuristic ITD formula by conceptually deriving the incremental diffracted field contribution from the uniform theory of diffraction coefficient and inferring the physical optics edge-diffracted field contribution from the terms related to the incidence shadow and reflection shadow boundaries. The proposed formula is applied to simple triangular impedance cylinder and disk models with impedance surfaces, and the results are compared with those of the method-of-moment and VIRAF's ITD solver to show that is performs similar to the former and better than the latter. [ABSTRACT FROM AUTHOR]

This paper discusses the applicability conditions of the Physical Optics (PO) approximation and investigates its predictive power for far-field diffraction patterns of Reconfigurable Intelligent Surfaces (RISs) based on binary metasurfaces (BMSs). We compare the PO model with the approximation of socalled Reflection Locality (RL). Although these two approximations are conceptually different, in the case of BMSs, RL turns out to be a prerequisite of the applicability of the PO. If RL holds for such RISs, PO adequately predicts the diffraction pattern only in the case of large periods, which restricts the applicability of the PO to rather small deflection angles. Recently, it was shown that the RL approximation and the popular approximation of so-called angular stability for periodically non-uniform reflecting metasurfaces are equivalent. Therefore, we conclude that BMSs with angular stability can be successfully designed using the PO approximation if the required deflection angles are restricted. In the absence of angular stability, the accuracy of PO is very poor. This finding highlights the importance of considering both the angular stability and the electromagnetic dimensions in RISs designs.

The Physical Optics (PO) method is used to derive simplified expressions to compute the radiation electric fields of planar graded-index and geodesic lenses based on a parallel-plate waveguide (PPW) implementation. If the PO method is combined with ray-tracing (RT) techniques, the resulting RT-PO procedure is capable of computing radiation patterns and gain of the PPW-based lens antennas when their apertures have a general shape and the electric field is vertically polarized. The RT-PO method is validated by comparing it with the full-wave simulation results of the commercial software ANSYS HFSS for three application cases. The results show that the RT-PO approach is not only very efficient from a computational point of view but also accurate, thus being a very convenient analysis/design tool for this kind of antenna.

The detection of weak time-dependent alternating signals in a strongly noisy background is an important problem in physics and a critical task in metrology. Quantum lock-in amplifier can extract alternating signals within extreme noises by using suitable quantum resources, which has been widely used for magnetic field sensing, vector light shift detection, and force detection. In particular, entanglement-enhanced quantum lock-in amplifier can be realized via many-body quantum interferometry. The many-body lock-in measurement provides a feasible way to achieve high-precision detection of alternating signals, even in noisy environments. In this article, we review general protocol, experiment progresses and potential applications of quantum lock-in measurements. [ABSTRACT FROM AUTHOR]

To address the challenges posed by composite targets composed of an anisotropic medium and metal in electromagnetic (EM) scattering calculations, this paper introduces an innovative hybrid algorithm tailored for simulating the EM scattering characteristics of such complex targets. Utilizing impedance boundary condition (IBC), the method employs surface impedance vectors to precisely depict the EM properties of the medium. By harnessing the distinct advantages of the Method of Moments (MoMs) at low frequency and Physical Optics (POs) at high frequency, the algorithm ensures both accuracy and efficiency in the EM simulation of composite targets. By transforming the EM scattering problem of targets coated with a thin-layered medium into an equivalent radiation problem of EM currents on impedance surfaces, this research has achieved rapid and high-precision calculations of the Radar Cross Section (RCS) for complex targets with anisotropic medium coatings. To assess the performance of the algorithm, three target models—square plates, simplified aircraft, and complex satellites—are selected as test cases. The dual metrics of RCS and surface current distribution are utilized as evaluation benchmarks, and comparisons are made against the Method of Moments–Finite Element Method (MoM-FEM) hybrid numerical method. The comparative results demonstrate that the proposed method meets the engineering standards in terms of both the root mean square error (RMSE) of RCS and the relative error in surface current distribution, while also achieving a significant improvement of over 50% in computational efficiency, thereby validating its superior accuracy and practical utility. [ABSTRACT FROM AUTHOR]

Correlations between stochastic electromagnetic beams' intensity variations which are produced by sources with anisotropic crossspectral density matrices are explored. Recently introduced spectral degree of cross-polarization, spectral degree of coherence, and the intensity fluctuations of electromagnetic sources are analyzed upon propagation by considering the source as an anisotropic beam. An analytical formula is given for the cross-spectral density matrix of an anisotropic electromagnetic Gaussian Schell beam moving across free space and extended to longitudinal and transverse directions. The analysis shows that the cross-polarization of two beams having same source parameters might increase or decrease on propagation depending on the anisotropy ratio α. Numerical results are presented to show that the beam anisotropy might be one of the convenient methods for modeling partially coherent sources. [ABSTRACT FROM AUTHOR]

The capability to design, manufacture and test Hypersonic Glide Vehicles (HGVs) has been demonstrated by a number of nations, and they are increasingly forming part of military inventories, potentially offering capabilities highly unique to this technology. This article reports the simulated Monostatic Radar Cross Section of a generic HGV in five frequency ranges, HF, VHF, UHF, L, and S‐bands associated with different radar types. Full spherical datasets of complex co‐ and cross‐polar data are synthesised so that backscatter resulting from illumination by r.f./microwave energy of linear or circular polarisation can subsequently be computed from the raw dataset. Circular polarisation is commonly employed by ground‐based Ballistic Missile Early Warning Systems and Space Object Surveillance and Identification radars to avoid polarisation mis‐match losses resulting from ionospheric Faraday rotation effects. The data was generated using Ansys' Finite Element Solver at 10, 150 and 430 MHz, with the Geometric Optics/Physical Optics based SBR+ solver employed for 1.3 and 3 GHz data. All data was produced at below the Nyquist sampling interval relevant to the target's electrical size. These datasets were then imported into a Matlab routine which extracted data over limited angular ranges associated with the likely radar line‐of‐sight in particular scenarios, typically having a standard deviation of ±10° about the direction of flight, applying either a Gaussian or Uniform sampling distribution as part of a Monte Carlo analysis. These extracted data were then used to form histograms giving the probability of sampling particular RCS values. Probability density functions and cumulative distribution functions were then fitted, to aid in the representation of statistical target fluctuations for each band and angular sampling range. The HGV exists in either the 'Rayleigh', 'resonance' or 'optical' scattering regimes, depending on its relative electrical size. The results suggest that for this target shape at HF and VHF cases a simple Swerling 0 (fluctuation invariant) approximation is adequate in most instances, whilst a Gamma distribution may be applied for UHF band cases. At L and S‐band a Beta distribution was found to provide a good fit to the available data. [ABSTRACT FROM AUTHOR]

Copyright of Laser Technology is the property of Gai Kan Bian Wei Hui and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Off-axis parabolic mirrors (OAPMs) are widely used in the THz and mm-wave communities for spectroscopy and imaging applications, as a result of their broadband, low-loss operation and high numerical apertures. However, the aspherical shape of an OAPM creates significant geometric aberrations: these make achieving diffraction-limited performance a challenge, and lower the peak electric field strength in the focal plane. Here, we quantify the impact of geometric aberrations on the performance of the most widely used spectrometer designs, by using ray tracing and physical optics calculations to investigate whether diffraction-limited performance can be achieved in both the sample and the detector plane. We identify simple rules, based on marginal ray propagation, that allow spectrometers to be designed that are more robust to misalignment errors, and which have minimal aberrations for THz beams. For a given source, this allows the design of optical paths that give the smallest THz beam focal spot, with the highest THz electric field strength possible. This is desirable for improved THz imaging, for better signal-to-noise ratios in linear THz spectroscopy and optical-pump THz-probe spectroscopy, and to achieve higher electric field strengths in non-linear THz spectroscopy. [ABSTRACT FROM AUTHOR]

In structured light tweezers, it is a challenging technical issue to realize the complete circular motion of the trapped particles parallel to the optical axis. Herein, we propose and generate a novel optical skipping rope via combining beam shaping technology, Fourier shift theorem, and beam grafting technology. This optical skipping rope can induce the transverse orbital angular momentum (OAM) (i.e., nominal OAM, whose direction is perpendicular to the optical axis) and transfer it to the particles, so that the particles have a transverse torque, thereby causing the particles to rotate parallel to the optical axis. Experimentally, our optical tweezers validate that the designed optical skipping rope realizes the orbital motion of polystyrene particles parallel to the optical axis. Additionally, the experiments also demonstrate that the optical skipping ropes manipulate particles to move along the oblique coil trajectory and three-dimensional (3D) cycloidal trajectory. Using the laser beam induced OAM, this innovative technology increases the degree of freedom for manipulating particles, which is of great significance for the application of optical tweezers in optical manipulation, micromechanics, and mimicry of celestial orbits.

Cirrus clouds have an extensive global coverage and their high altitude means they play a critical role in the atmospheric radiation balance. Hexagonal ice plates and columns are two of the most abundant species present in cirrus and yet there remains a poor understanding of how surface roughness affects the scattering of light from these particles. To advance current understanding, the scattering properties of hexagonal ice plates with varying surface roughness properties are simulated using the discrete dipole approximation and the parent beam tracer physical–optics method. The ice plates are chosen to have a volume-equivalent size parameter of 2πr/λ=60, where r is the radius of the volume-equivalent sphere, and a refractive index n=1.31+0i at a wavelength λ=0.532 µm. The surface roughness is varied in terms of a characteristic length scale and an amplitude. The particles are rotated into 96 orientations to obtain the quasi-orientation averaged scattering Mueller matrix and integrated single-scattering parameters. The study finds that the scattering is largely invariant with respect to the roughness length scale, meaning it can be characterised solely by the roughness amplitude. Increasing the amplitude is found to lead to a decrease in the asymmetry parameter. It is also shown that roughness with an amplitude much smaller than the wavelength has almost no effect on the scattering when compared with a pristine smooth plate. The parent beam tracer method shows good agreement with the discrete dipole approximation when the characteristic length scale of the roughness is several times larger than the wavelength, with a computation time reduced by a factor of approximately 500.

Optical vortex lattices (OVLs) with diverse modes show potential for a wide range of applications, such as high-capacity optical communications, optical tweezers, and optical measurements. However, vortices in typical regulated OVLs often exhibit irregular shapes, such as being narrow and elongated. The resulting increase in asymmetry negatively impacts the efficiency of particle trapping. Additionally, the vortex radii expand with an increase in topological charge (TC), limiting the TC value of the vortices and hindering their ability to fully utilize orbital angular momentum (OAM). Herein, we propose an alternative approach to custom OVLs using off-axis techniques combined with amplitude modulation. Amplitude modulation enables the precise generation of an OVL with perfect vortex properties, known as a perfect off-axis OVL. Further, the number of vortices in the perfect off-axis OVL, the off-axis distances, and the TC can be freely modulated while maintaining a circular mode. This unique OVL will promote new applications, such as the complex manipulation of multi-particle systems and optical communication based on OAM.

The knife‐edge diffraction model (KED) and the uniform geometrical theory of diffraction (UTD) have been widely used to predict the shadowing effect at millimetre‐wave (mmWave) bands. This letter proposes a mathematical derivation to rigorously prove that, for an absorbing screen, UTD applying the narrow‐angle Fresnel approximation is equivalent to KED. The simulation scenarios are designed to validate the proposal by comparing KED with UTD in the narrow‐angle (less than 20°) and wide‐angle (over 20°) regions at mmWave bands (20100 GHz). Simulated results agree with the proposal that KED is identical to UTD with a low error of less than 0.1 dB in the narrow‐angle region, while they have a difference with an error of over 1 dB in the wide‐angle region. In addition, the average computational time is measured and results in both UTD and KED taking approximately 8.0 ms for one test. From the proposal, it can be theoretically explained the differences and similarities between KED and UTD for an absorbing screen. [ABSTRACT FROM AUTHOR]

This study introduces an innovative optimization method to identify the optimal configuration of a sparse symmetric 2D array for applications in security, particularly multistatic imaging. Utilizing genetic algorithms (GAs) in a sophisticated optimization process, the research focuses on achieving the most favorable antenna distribution while mitigating the common issue of secondary lobes in sparse arrays. The main objective is to determine the ideal configuration from specific design parameters, including hardware specifications such as number of radiating elements, minimum spacing, operating frequency range, and image separation distance. The study employed a cost function based on the the point spread function (PSF), the system response to a point source, with the goal of minimizing the secondary lobe levels and maximizing their separation from the main lobe. Advanced simulation algorithms based on physical optics (PO) were used to validate the presented methodology and results. [ABSTRACT FROM AUTHOR]

A truncated uniaxially anisotropic chiral slab with the optical axis perpendicular to its planar interfaces is lit by an incident plane wave, thus generating a diffraction contribution to the scattered field. The direction of incidence and the incident electric field are assumed to be orthogonal and parallel to the edge, respectively. The uniform asymptotic physical optics approach is here used to attain a solution for the diffracted field to be added to the geometrical optics field. Such a solution is the only one available as a result of an analytical procedure that is applied to the considered problem. The resulting total field does not exhibit discontinuities across the reflection and incident shadow boundaries. [ABSTRACT FROM AUTHOR]

Ship's movement on the sea surface will produce wake extending for several kilometers. In order to study the electromagnetic scattering characteristics of the composite scene of sea surface, ship, and wake, this paper combines geometric optics with physical optics (GO-PO), Kirchhoff approximation (KA) and facet scattering field model of sea surface to calculate the electromagnetic scattering characteristics of this composite scene. Firstly, the geometric model of the composite scene of sea surface and Kelvin wake is established by using Elfouhaily omnidirectional spectrum and classical ship wave generation theory. Secondly, the generated geometric overlay model of the wake and sea surface is combined with the ship to generate a composite scene model of the sea surface, ship, and wake. Finally, the scattering echoes of sea surface and wake are calculated by KA and facet scattering field model of sea surface, and the scattering echoes of ship is calculated by GO-PO. On this basis, the electromagnetic characteristics of the composite scene of sea surface, ship, and wake under different conditions are discussed. The research conclusion has certain reference value for the detection of ship and wake in complex sea conditions. [ABSTRACT FROM AUTHOR]

Reaction conditions: o -formylbenzoic acid (1a) (0.2 mmol), benzylamine (2a) (0.2 mmol), acetophenone (3a) (0.6 mmol), H 2 O (1 mL), 70 °C. When the molar ratio of I o i -formylbenzoic acid/benzylamine/acetophenone was 1:1:3, the highest yield of 71% was obtained. Reaction conditions: o -formylbenzoic acid (1a) (0.2 mmol), benzylamine (2a) (0.2 mmol), acetophenone (3a) (0.6 mmol), H 2 O (1 mL), 12 h. Keywords: isoindolin-1-one; water; catalyst-free; three-component reaction; o -formylbenzoic acid EN isoindolin-1-one water catalyst-free three-component reaction o -formylbenzoic acid 3172 3178 7 09/11/23 20231004 NES 231004 Graph Nitrogen-containing heterocycles are an important class of compounds, and form the basic skeletons of many drugs, natural products, and functional materials. [Extracted from the article]

In this review work, we give a review of recent works of high-frequency electromagnetic (EM) wave scattering in complex media and structures. The EM wave scattering from electrically large scatterers remains an important and challenging problem. We introduce the quadratic patches to discretize the electrically large scatterers and present the fast physical optics (FPO) method to solve the PO radiation integral. The computational workload and accuracies of the physical optics (PO) scattered fields from the quadratic patches are error-controllable and frequency-independent, respectively. To remedy the limitations of the accuracies of the PO scattered fields in the lit region of the electrically large scatterers, we consider the Fock current from the convex scatterers to cover the contributions of creeping wave fields in the shadow region. For the coated material from the perfectly conducting structure, we propose the multi-level technique together with the PO method to calculate the scattered field in an efficient way. In the process of mesh discretization for electrically large scatterers, we adopt the quadratic patches and further extend them to adaptive patches. For the multi-scale scatterers, we use the hybrid method of moment and FPO (MoM-FPO) method to calculate the scattered field from the multi-scale scatterers. [ABSTRACT FROM AUTHOR]

Synthetic Aperture Radar (SAR) image target detection is of great significance in civil surveillance and military reconnaissance. However, there are few publicly released SAR image datasets of typical non-cooperative targets. Aiming to solve this problem, a fast facet-based SAR imaging model is proposed to simulate the SAR images of non-cooperative aircraft targets under different conditions. Combining the iterative physical optics and the Kirchhoff approximation, the scattering coefficient of each facet on the target and rough surface can be obtained. Then, the radar echo signal of an aircraft target above a rough surface environment can be generated, and the SAR images can be simulated under different conditions. Finally, through the simulation experiments, a dataset of typical non-cooperative targets can be established. Combining the YOLOv5 network with the convolutional block attention module (CBAM) and another detection head, a SAR image target detection model based on the established dataset is realized. Compared with other YOLO series detectors, the simulation results show a significant improvement in precision. Moreover, the automatic target recognition system presented in this paper can provide a reference for the detection and recognition of non-cooperative aircraft targets and has great practical application in situational awareness of battlefield conditions. [ABSTRACT FROM AUTHOR]

The "Synchrotron Radiation Workshop" (SRW) code is a computer program developed by the European Synchrotron Radiation Facility in 1997. It is used for simulating X-ray beamlines and coherence-exploiting experiments at synchrotron light sources. The code allows for the simulation of partially coherent wavefront propagation and the calculation of intensity distributions and coherence lengths. It has been used for electron beam diagnostics and offers brighter and more coherent X-ray beams for scientific experiments. The code is continuously developed and has interfaces with various software platforms. The article provides examples of simulations and mentions ongoing development and support from different organizations and research facilities. [Extracted from the article]

The rough structure may affect the flow field and electromagnetic (EM) scattering characteristics of a hypersonic vehicle. In this study, the EM scattering characteristics of the hypersonic vehicle RAM C-II with a microrough surface were investigated in the millimeter wave band. We first simulated the flow field of a smooth RAM C-II vehicle and calculated the radar cross section (RCS) in the wideband using the physical optics method. The calculation results show that many factors contribute to the variation in the RCS; however, it is occasionally difficult to predict. We then used a one-dimensional Gaussian random rough surface to generate a RAM C-II with a microrough surface through a point-coordinate transformation and simulated its flow field. The electron density flow field of the rough surfaced aircraft fluctuates greatly on the wall. Finally, we calculated the RCS of RAM C-II with different values of roughness in the millimeter wave band. The change of surface structure can be reflected in millimeter waves, and the RCS is determined by both plasma and rough structure. [ABSTRACT FROM AUTHOR]

Radar Cross Section (RCS) plays a significant role in detecting and tracking the space-based objects such as launch vehicles, missiles, aircrafts etc. In space applications, Radar systems are used to track and provide real-time trajectory information of the satellite launch vehicles after the lift off from the launch pad for range safety purpose. RCS is a critical key parameter that determines tracking performance of the Radar and it is highly dependent on both Radar operating parameters and the target characteristics. For space-based applications, a good quantity of RCS is required for quick detection by the Radar for continuous tracking. In order to choose the best Radar tracking configuration for real time tracking of the launch vehicle, it is required to model and simulate the launch vehicle’s RCS fluctuations prior to launch in order to predict the real time Signal to Noise Ratio (SNR) for its complete dynamic trajectory. This modeling and simulation methodology will help to choose the optimum Radar configuration for obtaining a good quantity SNR in the real-time launch. This study also provides good guidance to Radar operators for the effective Radar operation during real time space object tracking. This paper demonstrates, the real-time RCS fluctuations of a typical ISRO launch vehicle through simulation for its dynamic trajectory using physical optics based EM software prior to launch. Furthermore, the simulation results are validated with real time monostatic Radar tracking data, which showed good agreement. [ABSTRACT FROM AUTHOR]

Copyright of Laser Technology is the property of Gai Kan Bian Wei Hui and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The letter to the editor discusses the properties of Congo red-stained amyloid, challenging the common belief that it exhibits 'apple-green birefringence.' The text delves into the physical optics principles behind the colors observed in stained amyloid, emphasizing the anomalous colors produced by the material's birefringence. The author suggests that the most accurate description of the colors seen in Congo red-stained amyloid between polarizer and analyzer is 'anomalous colors,' which are a result of the optical properties of oriented Congo red within the amyloid material. [Extracted from the article]