Search

The self-assembly of plasmonic nanoparticles (NPs) to form specific nanostructures is a powerful strategy for controlling their optical properties and is useful for developing new materials for che...

2,4,6-trinitrotoluene (TNT) is one of the most commonly used nitro aromatic explosives in landmine, military and mining industry. This article demonstrates rapid and selective identification of TNT by surface-enhanced Raman spectroscopy (SERS) using 6-aminohexanethiol (AHT) as a new recognition molecule. First, Meisenheimer complex formation between AHT and TNT is confirmed by the development of pink colour and appearance of new band around 500 nm in UV-visible spectrum. Solution Raman spectroscopy study also supported the AHT:TNT complex formation by demonstrating changes in the vibrational stretching of AHT molecule between 2800-3000 cm−1. For surface enhanced Raman spectroscopy analysis, a self-assembled monolayer (SAM) of AHT is formed over the gold nanostructure (AuNS) SERS substrate in order to selectively capture TNT onto the surface. Electrochemical desorption and X-ray photoelectron studies are performed over AHT SAM modified surface to examine the presence of free amine groups with appropriate orientation for complex formation. Further, AHT and butanethiol (BT) mixed monolayer system is explored to improve the AHT:TNT complex formation efficiency. Using a 9:1 AHT:BT mixed monolayer, a very low detection limit (LOD) of 100 fM TNT was realized. The new method delivers high selectivity towards TNT over 2,4 DNT and picric acid. Finally, real sample analysis is demonstrated by the extraction and SERS detection of 302 pM of TNT from spiked.

We report rapid and ultra-sensitive detection system for 2,4,6-trinitrotoluene (TNT) using unmodified gold nanoparticles and surface-enhanced Raman spectroscopy (SERS). First, Meisenheimer complex has been formed in aqueous solution between TNT and cysteamine in less than 15 min of mixing. The complex formation is confirmed by the development of a pink colour and a new UV-vis absorption band around 520 nm. Second, the developed Meisenheimer complex is spontaneously self-assembled onto unmodified gold nanoparticles through a stable Au-S bond between the cysteamine moiety and the gold surface. The developed mono layer of cysteamine-TNT is then screened by SERS to detect and quantify TNT. Our experimental results demonstrate that the SERS-based assay provide an ultra-sensitive approach for the detection of TNT down to 22.7 ng/L. The unambiguous fingerprint identification of TNT by SERS represents a key advantage for our proposed method. The new method provides high selectivity towards TNT over 2,4 DNT and picric acid. Therefore it satisfies the practical requirements for the rapid screening of TNT in real life samples where the interim 24-h average allowable concentration of TNT in waste water is 0.04 mg/L.

The preparation of biotinylated, self-assembled polymer stabilized gold nanoparticle hybrids encoded with a SERS active compound is described. The polymers used for nanoparticle stabilization are carefully designed for this purpose and are synthesized by the RAFT polymerization process, as the thiocarbonylthio end group provides a functional handle for anchoring the polymers to the gold surface. Functionalized biotin moieties are attached to the hybrid nanoparticles via Cu-catalyzed azide-alkyne cycloaddition. Binding of the biotinylated hybrid nanoparticles to streptavidin was confirmed by nanoparticle detection and identification by the SERS spectrum of the surface-bound SERS active compound, quinoline thiol. This investigation includes the requisites that constitute a bioassay, demonstrating the potential of polymer-coated hybrid nanoparticles for this purpose.

The surface enhanced Raman scattering effect has shown immense potential for detecting trace amounts of explosive vapor molecules. To date, efforts to produce a commercially available, reliable SERS sensor have been impeded by an inability to separate the electromagnetic enhancement produced by the metallic nanostructure from other signal enhancing effects. Here, we show a new Raman sensor that uses surface acoustic waves (SAWs) to produce controllable surface structures on gold films deposited on LiNbO3 substrates that modulate the Raman signal of a target compound (thiophenol) adsorbed on the films. We demonstrate that this sensor can dynamically control the Raman signal simply by changing the SAW’s amplitude, allowing the Raman signal enhancement factor to be directly measured with no variation in the concentration of the target compound. The physically adsorbed molecules can be removed from the sensor without physical cleaning or damage, making it possible to reuse it for real-time Raman detection.

Plasmonic gold nanoassemblies that self-assemble with the aid of linking molecules or polymers have the potential to yield controlled hierarchies of morphologies and consequently result in materials with tailored optical (e.g., localized surface plasmon resonances (LSPR)) and spectroscopic properties (e.g., surface-enhanced Raman scattering (SERS)). Molecular linkers that are structurally well-defined are promising for forming hybrid nanoassemblies which are stable in aqueous solution and are increasingly finding application in nanomedicine. Despite much ongoing research in this field, the precise role of molecular linkers in governing the morphology and properties of the hybrid nanoassemblies remains unclear. Previously we have demonstrated that branched linkers, such as hyperbranched polymers, with specific anchoring end groups can be successfully employed to form assemblies of gold NPs demonstrating near-infrared SPRs and intense SERS scattering. We herein introduce a tailored polymer as a versatile molecular linker, capable of manipulating nanoassembly morphologies and hot-spot density. In addition, this report explores the role of the polymeric linker architecture, specifically the degree of branching of the tailored polymer in determining the formation, morphology, and properties of the hybrid nanoassemblies. The degree of branching of the linker polymer, in addition to the concentration and number of anchoring groups, is observed to strongly influence the self-assembly process. The assembly morphology shifts primarily from 1D-like chains to 2D plates and finally to 3D-like globular structures, with increase in degree of branching of the macromolecular linker. Insights have been gained into how the morphology influences the SERS performance of these nanoassemblies with respect to hot-spot density. These findings supplement the understanding of the morphology determining nanoassembly formation and pave the way for the possible application of these nanoassemblies as SERS biosensors for medical diagnostics.

The morphology of plasmonic nano-assemblies has a direct influence on optical properties, such as localised surface plasmon resonance (LSPR) and surface enhanced Raman scattering (SERS) intensity. Assemblies with core-satellite morphologies are of particular interest, because this morphology has a high density of hot-spots, while constraining the overall size. Herein, a simple method is reported for the self-assembly of gold NPs nano-assemblies with a core-satellite morphology, which was mediated by hyperbranched polymer (HBP) linkers. The HBP linkers have repeat units that do not interact strongly with gold NPs, but have multiple end-groups that specifically interact with the gold NPs and act as anchoring points resulting in nano-assemblies with a large (∼48 nm) core surrounded by smaller (∼15 nm) satellites. It was possible to control the number of satellites in an assembly which allowed optical parameters such as SPR maxima and the SERS intensity to be tuned. These results were found to be consistent with finite-difference time domain (FDTD) simulations. Furthermore, the multiplexing of the nano-assemblies with a series of Raman tag molecules was demonstrated, without an observable signal arising from the HBP linker after tagging. Such plasmonic nano-assemblies could potentially serve as efficient SERS based diagnostics or biomedical imaging agents in nanomedicine.

We have explored the potential of deep Raman spectroscopy, specifically surface enhanced spatially offset Raman spectroscopy (SESORS), for non-invasive detection from within animal tissue, by employing SERS-barcoded nanoparticle (NP) assemblies as the diagnostic agent. This concept has been experimentally verified in a clinic-relevant backscattered Raman system with an excitation line of 785 nm under ex vivo conditions. We have shown that our SORS system, with a fixed offset of 2-3 mm, offered sensitive probing of injected QTH-barcoded NP assemblies through animal tissue containing both protein and lipid. In comparison to that of non-aggregated SERS-barcoded gold NPs, we have demonstrated that the tailored SERS-barcoded aggregated NP assemblies have significantly higher detection sensitivity. We report that these NP assemblies can be readily detected at depths of 7-8 mm from within animal proteinaceous tissue with high signal-to-noise (S/N) ratio. In addition they could also be detected from beneath 1-2 mm of animal tissue with high lipid content, which generally poses a challenge due to high absorption of lipids in the near-infrared region. We have also shown that the signal intensity and S/N ratio at a particular depth is a function of the SERS tag concentration used and that our SORS system has a QTH detection limit of 10-6 M. Higher detection depths may possibly be obtained with optimization of the NP assemblies, along with improvements in the instrumentation. Such NP assemblies offer prospects for in vivo, non-invasive detection of tumours along with scope for incorporation of drugs and their targeted and controlled release at tumour sites. These diagnostic agents combined with drug delivery systems could serve as a “theranostic agent”, an integration of diagnostics and therapeutics into a single platform.

A series of the biodegradable copolyester hydrogels was prepared using a redox-initiated polymerization with a constant 1:9 mole ratio of the Boltorn-based acrylate and diacrylate triblock comacromonomers. The Boltorn (R) macromonomer was derived from the hyperbranched polyester Boltorn H20, which was functionalized at each terminus with poly(ethylene glycol) acrylate, and the diacrylate triblock macromonomer was poly (lactide-b-ethylene glycol-b-lactide) diacrylate. The hydrolysis of the copolyesters at pH 7.4 in a phosphate buffered saline solution at 37 degrees C was studied using ATR-FTIR spectroscopy. It was found that the presence of the Boltorn, the PEG, and lactide block lengths both play vital roles in determining the structure-property relationships in these materials. The ATR-FTIR studies showed that with increasing lactide segment length, the rate of ester hydrolysis increased due to the increased concentration of the hydrolytically sensitive poly(lactic acid) (PLA) ester groups in the network. However, incorporation of Boltorn into the PLA-PEG-PLA copolymer did not significantly change the kinetic rate constant for hydrolysis of the PLA segments. The cytocompatibility of a typical one of these materials in the presence of its degradation by-products was assessed using cultured osteoblasts from the rat. The hydrogel was degraded for 28 days and found to be cytocompatible with osteoblasts over days 23 to 28 of the hydrolysis period. (c) 2013 Wiley Periodicals, Inc.

Time‐resolved Raman spectroscopy, spatially offset Raman spectroscopy and time‐resolved spatially offset Raman spectroscopy (TR‐SORS) have proven their capability for the non‐invasive profiling of deep layers of a sample. Recent studies have indicated that TR‐SORS exhibits an enhanced selectivity toward the deep layers of a sample. However, the enhanced depth profiling efficiency of TR‐SORS, in comparison with time‐resolved Raman spectroscopy and spatially offset Raman spectroscopy, is yet to be assessed and explained in accordance to the synergistic effects of spatial and temporal resolutions. This study provides a critical investigation of the depth profiling efficiency of the three deep Raman techniques. The study compares the efficiency of the various deep Raman spectroscopy techniques for the stand‐off detection of explosive precursors hidden in highly fluorescing packaging. The study explains for the first time the synergistic effects of spatial and temporal resolutions in the deep Raman techniques and their impact on the acquired spectral data. Copyright © 2013 John Wiley & Sons, Ltd.

Current concerns regarding terrorism and international crime highlight the need for new techniques for detecting unknown and hazardous substances. A novel Raman spectroscopy-based technique, spatially offset Raman spectroscopy (SORS), was recently devised for non-invasively probing the contents of diffusely scattering and opaque containers. Here, we demonstrate a modified portable SORS sensor for detecting concealed substances in-field under different background lighting conditions. Samples including explosive precursors, drugs and an organophosphate insecticide (chemical warfare agent surrogate) were concealed inside diffusely scattering packaging including plastic, paper and cloth. Measurements were carried out under incandescent and fluorescent light as well as under daylight to assess the suitability of the probe for different real-life conditions. In each case, it was possible to identify the substances against their reference Raman spectra in less than one minute. The developed sensor has potential for rapid detection of concealed hazardous substances in airports, mail distribution centers and customs checkpoints.

Deep Raman spectroscopy has been utilized for the standoff detection of concealed chemical threat agents from a distance of 15 meters under real life background illumination conditions. By using combined time and space resolved measurements, various explosive precursors hidden in opaque plastic containers were identified non-invasively. Our results confirm that combined time and space resolved Raman spectroscopy leads to higher selectivity towards the sub-layer over the surface layer as well as enhanced rejection of fluorescence from the container surface when compared to standoff spatially offset Raman spectroscopy. Raman spectra that have minimal interference from the packaging material and good signal-to-noise ratio were acquired within 5 seconds of measurement time. A new combined time and space resolved Raman spectrometer has been designed with nanosecond laser excitation and gated detection, making it of lower cost and complexity than picosecond-based laboratory systems.

A time-resolved inverse spatially offset Raman spectrometer was constructed for depth profiling of Raman-active substances under both the lab and the field environments. The system operating principles and performance are discussed along with its advantages relative to traditional continuous wave spatially offset Raman spectrometer. The developed spectrometer uses a combination of space- and time-resolved detection in order to obtain high-quality Raman spectra from substances hidden behind coloured opaque surface layers, such as plastic and garments, with a single measurement. The time-gated spatially offset Raman spectrometer was successfully used to detect concealed explosives and drug precursors under incandescent and fluorescent background light as well as under daylight. The average screening time was 50 s per measurement. The excitation energy requirements were relatively low (20 mW) which makes the probe safe for screening hazardous substances. The unit has been designed with nanosecond laser excitation and gated detection, making it of lower cost and complexity than previous picosecond-based systems, to provide a functional platform for in-line or in-field sensing of chemical substances.

Fibres are extremely common. They can originate directly from human and animal hair, and also from textiles in the form of clothing, upholstery and carpets. Hair and textile fibres are relatively easily shed and transferred, which means that it is highly likely that fibres will be found at crime scenes. If such fibres are carefully characterised they can be of immense value in the forensic environment. Vibrational spectroscopy is one of the most important methods for the characterisation of natural and synthetic fibres. The vibrational spectrum, whether mid-IR or Raman, can be considered to be a fingerprint of the molecular structure of the fibre and as such has a very high information content.

Spatially offset Raman spectroscopy (SORS) is a powerful new technique for the non-invasive detection and identification of concealed substances and drugs. Here, we demonstrate the SORS technique in several scenarios that are relevant to customs screening, postal screening, drug detection and forensics applications. The examples include analysis of a multi-layered postal package to identify a concealed substance; identification of an antibiotic capsule inside its plastic blister pack; analysis of an envelope containing a powder; and identification of a drug dissolved in a clear solvent, contained in a non-transparent plastic bottle. As well as providing practical examples of SORS, the results highlight several considerations regarding the use of SORS in the field, including the advantages of different analysis geometries and the ability to tailor instrument parameters and optics to suit different types of packages and samples. We also discuss the features and benefits of SORS in relation to existing Raman techniques, including confocal microscopy, wide area illumination and the conventional backscattered Raman spectroscopy. The results will contribute to the recognition of SORS as a promising method for the rapid, chemically specific analysis and detection of drugs and pharmaceuticals.

Degradation of polypropylene (PP) during melt processing was studied using a novel profluorescence technique. The profluorescent nitroxide probe, 1,1,3,3-tetramethyldibenzo[ e,g ]isoindolin-2-yloxyl (TMDBIO) was added to PP during melt processing to act as a sensor for carbon-centred radicals. Trapping of carbon-centred radicals, formed during degradation of PP, led to an increase in fluorescence emission from TMDBIO adducts. Through analysis of viscosity changes during processing cumulative chain scission degradation was estimated. At processing temperatures of 210 °C or below, fluorescence emission from TMDBIO adducts could be correlated with cumulative chain scissions when the number of chain scissions was small. At higher temperatures, a correlation was not observed most probably due to radical-trap instability rather than decomposition of the TMDBIO. Thus, TMDBIO may be used as a profluorescent sensor for degradation of PP during melt processing when the processing temperature is 210 °C or below.

A polyhedral oligomeric silsesquioxane (POSS), functionalized with eight arms of poly(ethylene glycol) (PEG; MW 400) and then acrylated, was incorporated into a hydrogel network based on triblock copolymers of poly(lactide-b-ethylene glycol-b-lactide) diacrylates using a redox-initiated polymerization. The organic-inorganic hybrid hydrogels so prepared contained the inorganic crosslinker POSS from 1 to 28 wt.%. The degradation properties of the hydrogels in a pH 7.4 phosphate-buffered saline solution at 37 °C were studied using measurements of mass loss, cryogenic SEM, and ATR-FTIR spectroscopy. It was found that copolymerization of acrylated 1kPEG-lactide with increasing amounts of POSS created a more porous network which was more resistant to hydrolysis. The ATR-FTIR technique was used to monitor the progress of degradation with exposure time through the changes in the carbonyl and C-H deformation bands of the lactide and the Si-C stretching band of the POSS. Increasing POSS incorporation resulted in decreased rate of degradation due to its hydrophobic nature and inertness to hydrolysis. Conversely, an increase in lactide content increased the degradation rate due to the increased number of hydrolytically-sensitive ester groups in the network. © 2010 Elsevier Ltd. All rights reserved.

The macerals in bituminous coals with varying organic sulfur content from the Early Permian Greta Coal Measures at three locations (Southland Colliery, Drayton Colliery and the Cranky Corner Basin), in and around the Sydney Basin (Australia), have been studied using light-element electron microprobe (EMP) analysis and micro-ATR–FTIR. Electron microprobe analysis of individual macerals reveals that the vitrinite in both the Cranky Corner Basin and Drayton Colliery (Puxtrees seam) samples have similar carbon contents (ca. 78% C in telocollinite), suggesting that they are of equivalent rank. However, the Cranky Corner coals have anomalously low vitrinite reflectance (down to 0.45%) vs. the Drayton materials (ca. 0.7%). They also have very high organic S content (3–6.5%) and lower O content (ca. 10%) than the equivalent macerals in the Drayton sample (0.7% S and 15.6% O). A study was carried out to investigate the impacts of the high organic S on the functional groups of the macerals in these two otherwise iso-rank, stratigraphically-equivalent seams. An iso-rank low-S coal from the overlying Wittingham Coal Measures near Muswellbrook and coals of slightly higher rank from the Greta Coal Measures at Southland Colliery near Cessnock were also evaluated using the same techniques to extend the data set. Although the telocollinite in the Drayton and Cranky Corner coals have very similar carbon content (ca.78% C), the ATR–FTIR spectra of the vitrinite and inertinite macerals in these respectively low S and high S coals show some distinct differences in IR absorbance from various aliphatic and aromatic functional groups. The differences in absorbance of the aliphatic stretching bands (2800–3000 cm−1) and the aromatic carbon (CC) peak at 1606 cm−1 are very obvious. Compared to that of the Drayton sample (0.7% S and 15% O), the telocollinite of the Cranky Corner coal (6% S and 10% O) clearly shows: (i) less absorbance from OH groups, represented by a broad region around 3553 cm−1, (ii) much stronger aliphatic C–H absorbance (stretching modes around 3000–2800 cm−1 and bending modes around 1442 cm−1) and (iii) less absorbance from aromatic carbon functional groups (peaking at 1606 cm−1). Evaluation of the iso-rank Drayton and Cranky Corner coals shows that: (i) the aliphatic C–H absorbances decrease with increasing oxygen content but increase with increasing organic S content and (ii) the aromatic H to aliphatic H ratio (Har/Hali) for the telocollinite increases with (organic) O%, but decreases progressively with increasing organic S. The high organic S content in the maceral appears to be accompanied by a greater proportion of aliphatic functional groups, possibly as a result of some of the O within maceral ring structures in the high S coal samples being replaced.

A technique is described whereby micro-ATR/FTIR imaging can be used to follow polymer degradation reactions in situ in real time. The internal reflection element (IRE) assembly is removed from the ATR objective and polymer is solvent cast directly onto the IRE surface. The polymer is then subjected to degradation conditions and molecular structural changes monitored by periodically replacing the IRE assembly back in the ATR objective and collecting spectra which can be used to construct images. This approach has the benefit that the same part of the sample is always studied, and that contact by pressure which might damage the polymer surface is not required. The technique is demonstrated using the polymer Topas which was degraded by exposure to UVC light in air.

The SER spectra of riboflavin and FAD are identical and are resonance enhanced at 514 or 532 nm. Signals from FAD/riboflavin dominated SER spectra whenever these compounds were present with proteins or bacteria. SER spectra of very different bacteria such as Pseudomonas aeruginosa , Bacillus subtilis and Geobacillus stearothermophilus were dominated by signals from FAD, even when these bacteria were added to a preformed colloid. The SERS signal of FAD is greatly reduced at 785 nm, and SER spectra of bacteria excited at 785 nm are quite different than those collected at 514 or 532 nm. This supports the assignment of the peaks in the 514 nm SER spectra of bacteria to FAD rather to amino acids or N-acetylglucosamine. The SER spectra of certain mixes of adenine and FAD showed similar changes to those of bacteria when the excitation was changed from 514/532 to 785 nm. The ratios of colloid: bacteria were of critical important for obtaining good SER spectra, and the addition of sodium sulfate was also beneficial. Removal of EPS from bacteria before analysis facilitated interaction with the silver surface, and may be a useful step to include in identification protocols.

Raman spectroscopy and FT-IR imaging analyses of cave wall pigment samples from north Queensland (Australia) indicate that some hand stencils were undertaken during a dry environmental phase indicating late Holocene age. Other, earlier painting episodes also took place during dry environmental periods of the terminal Pleistocene and/or early Holocene. These results represent a rare opportunity to attain chronological information for rock art in conditions where insufficient carbon is present for radiocarbon dating.

The interactions of phenyldithioesters with gold nanoparticles (AuNPs) have been studied by monitoring changes in the surface plasmon resonance (SPR), depolarised light scattering, and surface enhanced Raman spectroscopy (SERS). Changes in the SPR indicated that an AuNP-phenyldithioester charge transfer complex forms in equilibrium with free AuNPs and phenyldithioester. Analysis of the Langmuir binding isotherms indicated that the equilibrium adsorption constant, K(ads), was 2.3 +/- 0.1 x 10(6) M(-1), which corresponded to a free energy of adsorption of 36 +/- 1 kJ mol(-1). These values are comparable to those reported for interactions of aryl thiols with gold and are of a similar order of magnitude to moderate hydrogen bonding interactions. This has significant implications in the application of phenyldithioesters for the functionalization of AuNPs. The SERS results indicated that the phenyldithioesters interact with AuNPs through the C=S bond, and the molecules do not disassociate upon adsorption to the AuNPs. The SERS spectra are dominated by the portions of the molecule that dominate the charge transfer complex with the AuNPs. The significance of this in relation to the use of phenyldithioesters for molecular barcoding of nanoparticle assemblies is discussed.

A laboratory scale twin screw extruder has been interfaced with a near infrared (NIR) spectrometer via a fibre optic link so that NIR spectra can be collected continuously during the small scale experimental melt state processing of polymeric materials. This system can be used to investigate melt state processes such as reactive extrusion, in real time, in order to explore the kinetics and mechanism of the reaction. A further advantage of the system is that it has the capability to measure apparent viscosity simultaneously which gives important additional information about molecular weight changes and polymer degradation during processing. The system was used to study the melt processing of a nanocomposite consisting of a thermoplastic polyurethane and an organically modified layered silicate.

A combination of micro-Raman spectroscopy, micro-infrared spectroscopy and SEM–EDX was employed to characterize decorative pigments on Classic Maya ceramics from Copan, Honduras. Variation in red paint mixtures was correlated with changing ceramic types and improvements in process and firing techniques. We have confirmed the use of specular hematite on Coner ceramics by the difference in intensities of Raman bands. Different compositions of brown paint were correlated with imported and local wares. The carbon-iron composition of the ceramic type, Surlo Brown, was confirmed. By combining micro-Raman analysis with micro-ATR infrared and SEM–EDX, we have achieved a more comprehensive characterization of the paint mixtures. These spectroscopic techniques can be used non-destructively on raw samples as a rapid confirmation of ceramic type.

A new plasma electrolytic deposition process working at atmospheric pressure has been developed for the growth of titanium dioxide coatings composed of nano-rods and nano-particles. By controlling the plasma discharge intensity, the treatment time and the initial titanium concentration in the liquid solution, we have been able to produce a large range of structures and morphologies that must be promising in various technological applications, from nano-electronics to solar cell technologies.

Organosilane hybrid materials are of interest in the development of diagnostic devices and drug-delivery applications. Here we report a spectroscopic study involving the chemical and structural modification of thiol-functionalised organosilica particles with aminosilane to produce a bifunctional silica hybrid. The aminosilane was revealed to be distributed throughout the microsphere as opposed to being surface-localised as is commonly reported for modifications of pure silica. Spectroscopic methods including NMR, XPS, Ninhydrin and gravimetric measurements were employed to investigate the surface and internal elemental composition of the particles independently. A multiplexed model bioassay is presented to demonstrate the advantage of organosilane bifunctionality, enabling separate covalent attachment strategies for both homogeneous incorporation of fluorescent dyes and surface-specific biomolecule attachment. This study represents an advance in the understanding of organosilane chemistry resulting in versatile materials with a range of functionalities for covalent attachment.

Fourier transform infrared (FT-IR) attenuated total reflection (ATR) imaging has been successfully used to identify individual mineral components of ancient Maya paint. The high spatial resolution of a micro FT-IR-ATR system in combination with a focal plane array detector has allowed individual particles in the paint to be resolved and identified from their spectra. This system has been used in combination with micro-Raman spectroscopy to characterize the paint, which was found to be a mixture of hematite and silicate particles with minor amounts of calcite, carbon, and magnetite particles in a sub-micrometer hematite and calcite matrix. The underlying stucco was also investigated and found to be a combination of calcite with fine carbon particles, making a dark sub-ground for the paint.

Polymer-stabilized gold nanoparticles (AuNPs) were prepared and encoded with a range of surface-enhanced Raman reporter molecules. A range of as-synthesized polymers produced by reversible addition fragmentation chain transfer (RAFT) polymerization were demonstrated to self-assemble at the surface of AuNPs dispersed in water. The method involved the coprecipitation of polymer-gold conjugates by the addition of polymer dissolved in a water-miscible solvent to gold AuNPs dispersed in water. This method represents a simplification of the preparation of polymer-stabilized AuNPs compared with other published methods, in that the AuNPs do not need to be first transferred to an organic solvent. The process enabled the polymer stabilized AuNPs to be easily recovered by filtration or by phase transfer of the AuNPs to an organic solvent in which the RAFT polymer was soluble. The polymer-stabilized AuNPs were characterized by a range of methods including UV-visible spectrophotometry, transmission electron microscopy, thermogravimetric analysis, dynamic light scattering, and attenuated total reflection Fourier transform infrared spectroscopy. Furthermore, 1H pulsed field gradient spin echo NMR was utilized to characterize the self-diffusion of the polymer-stabilized AuNPs. Finally, we then demonstrated that these polymer-stabilized AuNPs maintained their ability to be encoded with surface-enhanced Raman spectroscopy reporter molecules.

A new atmospheric pressure plasma electrolytic deposition process has been developed for the production of crystalline titanium dioxide films on metal substrates. The process occurs in a liquid precursor composed of titanium tetraisopropoxide and absolute ethanol. A plasma discharge is created and confined around the cathode in a superheated vapour sheath surrounded by the liquid phase, inducing the production of a nano-crystalline TiO2 coating at the surface of the cathode. The analysis of the structure and composition of these TiO2 coatings have been carried out by Scanning Electron Microscopy, Transmission Electron Microscopy, Raman and X-Ray Photoelectron Spectroscopies and X-Ray Diffraction. The produced crystalline titanium dioxide coatings are very adherent to the substrate and present a dendritic-like structure. We have moreover demonstrated that it is possible to adjust easily its composition by a post-processing calcination. Such characteristics make these films very interesting for photocatalysis, solar cells and gas sensing applications, and promise therefore some useful industrial benefits.

A novel plasma system has been developed recently for the deposition of carbon and titanium thin films on metal and metal alloy substrates. Unlike other deposition techniques, the process occurs in liquid precursors and a plasma discharge is created and confined around the cathode in a superheated vapour sheath surrounded by the liquid phase. This paper presents a detailed analysis on the physico-chemical mechanisms underlying this process. A correlation has then been carried out between the voltage / current characteristics of the process and the consecutive physical phenomena occurring during the process (vapour phase formation, plasma discharge initiation and evolution). A description of the different coatings (graphite and titanium dioxide) deposited with this technique has been carried out with an attempt to correlate the structure and composition of these films with the composition and physical characteristics of the plasma discharge. This analysis allowed the construction of a first dissociation and deposition mechanism for this new plasma system.

Hydroxy-terminated polybutadiene/isophorone diisocyanate (HTPB/IPDI) polyurethane rubber which was aged in air at elevated temperatures has been studied by infrared microspectroscopy. Spectra were collected in transmission mode on microtomed samples. Analysis of sets of spectra taken across the sectioned material showed that most of the degradation occurred in the polybutadiene part of the polymer and that the urethane linkage was essentially unchanged. The trans isomer of the polybutadiene appears to be preferentially degraded compared with the vinyl isomer. The IR technique does not provide significant information about the cis isomer. The IR spectra indicated that likely degradation products included acids, esters, alcohols, and small amounts of other products containing a carbonyl functional group. Band area ratios, supported by a principal components analysis, were used to derive degradation profiles for the material. These profiles were steep-sided indicating an oxygen diffusion limited process.

This study investigates alginate-chitosan polyelectrolyte complexes (PECs) in the form of a film, a precipitate, as well as a layer-by-layer (LbL) assembly. The focus of this study is to fully characterize, using the complementary techniques of Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) in combination with solution stability evaluation, the interactions between alginate and chitosan in the PECs. In the FTIR spectra, no significant change in the band position of the two carbonyl vibrations from alginate occurs upon interaction with different ionic species. However, protonation of the carboxylate group causes a new band to appear at 1710 cm(-1), as anticipated. Partial protonation of the amine group of chitosan causes the appearance of one new band ( approximately 1530 cm(-1)) due to one of the -NH3+ vibrational modes (the other mode overlaps the amide I band). Importantly, the position of the two main bands in the spectral region of interest in partly protonated chitosan films is not dependent on the extent of protonation. XPS N 1s narrow scans can, however, be used to assess the degree of amine protonation. In our alginate-chitosan film, precipitate, and LbL assembly, the bands observed in the FTIR correspond to the species -COO- and -NH3+, but their position is not different from each of the single components. Thus, the conclusion of the study is that FTIR cannot be used directly to identify the presence of PECs. However, in combination with XPS (survey and narrow N 1s scans) and solution stability evaluation, a more complete description of the structure can be obtained. This conclusion challenges the assignment of FTIR spectra in the literature.

Attenuated total reflectance micro-Fourier transform infrared (ATR-FTIR) spectrometry has been successfully used to characterise coal macerals, in particular telocollinite, and to investigate changes in the aromatic and aliphatic functional groups in the telocollinite, over a wide rank range (Rvmax from 0.39 to 3.52%) in coals from the Bowen Basin, Queensland, Australia. The results show that ATR-FTIR is very sensitive to the increasing aromaticity (the fraction of carbon atoms involved in aromatic units) of the telocollinites, and thus is a very useful tool to study the evolution of aromatic and aliphatic functional groups with maturation of telocollinite, and also to differentiate and characterise the various macerals in coal samples. In comparison with other micro-FTIR techniques, ATR-FTIR has many advantages: (1) no difficult and time-consuming procedures are required to obtain “pure” maceral separations, or for preparation of thin coal slices; (2) the ATR-FTIR spectra have better signal-to-noise ratio and increased sensitivity; (3) the ATR-FTIR spectra are similar to absorption spectra, but without significant spectral distortion.

In this work multiwalled carbon nanotubes were examined using a combination of thermal annealing followed by chemical treatments with potassium permanganate solution. Functionalization with carboxylic acid moieties through this newly devised process simultaneously purified and cut the nanotubes. A cutting procedure using potassium permanganate that could keep or remove the MnO2 has not been previously reported, making this study a stepping stone to further functionalization/application opportunities. One such further functionalization was explored here with alkyl groups, through the generation of an amide linkage. A very detailed standard suspension test was performed on this material. What was found was an increased suspension stability toward polar solvents for the nanotubes with high concentrations of MnO2 deposits, and in nonpolar solvents the nanotubes with large alkyl chains attached were observed, thus proving it to be a versatile treatment.

Osteoblast proliferation is sensitive to material surface properties. In this study, the proliferation of MC3T3 E1-S14 osteoblastic cells on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) films with different surface characteristics was investigated with the aim of evaluating the cause of a lag in cell growth previously observed. The solvent-cast films were prepared using three different solvents/solvent mixtures which produced PHBV films with both a rough (at the air interface) and smooth (at the glass interface) surface. Investigation of the surface roughness by scanning electron and scanning probe microscopy revealed that the surfaces had features that were different in both average lateral size and average amplitude (Ra 20-200 nm). Water contact angles showed that all surfaces were hydrophobic in nature (thetaA in the range 69-82 degrees ). The lateral distribution of surface crystallinity of the films was evaluated by use of micro-attenuated total reflectance Fourier transform infrared (ATR-FT-IR) by determining the surface crystallinity index (CI) which was found to differ between samples. MC3T3-E1-S14 osteoblasts were cultured on the six surfaces and proliferation was determined. After 2 days, cell proliferation on all surfaces was significantly less than on the control substrate; however, after 4 days cell proliferation was optimal on three surfaces. It was concluded that the initial lag on all substrates was due to the hydrophobic nature of the substrates. The ability of the cells to recover on the materials was attributed to the degree of heterogeneity of the crystallinity and surface roughness: samples with a roughness of 80 nm were found to support cell proliferation. In addition, the lateral surface features influenced the proliferation of osteoblasts on the PHBV film surface.

Atmospheric pressure plasma deposition of nano-crystalline graphite films on titanium substrates from a predominantly ethanolic liquid phase was carried out under varying applied voltage. A thorough study of the plasma electrolytic deposition mechanisms has been performed. The investigation of the composition, structural properties, and the morphology of these graphite coatings have been performed by visible and ultraviolet Raman spectroscopy, X-ray Photoelectron Spectroscopy, Scanning Electron Microscopy and X-ray elemental microanalysis. The experimental evidence of the reduction of the work function and the enhancement of the plasma intensity with the presence of the carbon film has been reported. These properties make such nano-crystalline graphite coatings very attractive for the production of inexpensive cold cathodes for electronics and plasma devices.

Blends of starch and a biodegradable polyester, produced by an extrusion process which included a cross-linker/compatibilizer (maleic anhydride) and an initiator (dicumyl peroxide), were studied by infrared (IR) microspectroscopy using an attenuated total reflectance (ATR) objective. Extruded material, which had a diameter of about 3 mm, was sectioned and embedded in epoxy resin prior to IR analysis. Spectra were collected in a grid pattern across the sectioned face of the sample. Measurement of various band parameters from the spectra allowed IR maps to be constructed containing semi-quantitative information about the distribution of blend components. These maps showed the quality of the blend on a microscopic scale and showed how it varied with different concentrations of compatibilizer and initiator.

Amine functionalities were introduced onto the surface of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) films by applying radio frequency ammonia plasma treatment and wet ethylenediamine treatment. The modified surfaces were characterized by X-ray photoelectron spectroscopy (XPS) for chemical composition and Raman microspectroscopy for the spatial distribution of the chemical moieties. The relative amount of amine functionalities introduced onto the PHBV surface was determined by exposing the treated films to the vapor of trifluoromethylbenzaldehyde (TFBA) prior to XPS analysis. The highest amount of amino groups on the PHBV surface could be introduced by use of ammonia plasma at short treatment times of 5 and 10 s, but no effect of plasma power within the range of 2.5-20 W was observed. Ethylenediamine treatment yielded fewer surface amino groups, and in addition an increase in crystallinity as well as degradation of PHBV was evident from Fourier transform infrared spectroscopy. Raman maps showed that the coverage of amino groups on the PHBV surfaces was patchy with large areas having no amine functionalities.

Small colonies (90 – 350 μm in diameter) of the pigmented halophilic bacterium Halobacterium salinarium have been studied by Raman microspectroscopy using excitation at 632.8 nm. The Raman spectra were dominated by bands due to carotene compounds. The intensity of the pigment bands varied across the diameter of the colonies in a way that suggested the presence of concentric rings of higher pigment concentration. Although the colonies were grown in a transparent incubator in an open laboratory, it was demonstrated that the rings were not a result of the diurnal variation of light and dark. These results support a proposed model relating cell motility and cell concentration.

Micro-Raman spectroscopy was applied to the study of multiple layered wall paints from the Rosalila temple, Copan, Honduras, which dates to the Middle Classic period (A.D. 520 to 655). Samples of red, green and grey paint and a thick white overcoating were analysed. The paint pigments have been identified as hematite, celadonite or green earth and a combined carbon/mica mixture. By combining Raman spectroscopy with micro-ATR infrared spectroscopy and environmental scanning electron microscopy (ESEM), a detailed study has been made of the materials and processes used to make the stucco and paints. The use of green earth as a green pigment on Maya buildings has not been reported before. The combination of carbon and muscovite mica to create a reflective paint is also a novel finding.

The FT-IR and Raman spectroscopic analysis of a red powder found in a chest from an officer's cabin during the excavation of the wreck of the 18th Century frigate HMS Pandora have confirmed that the pigment is cinnabar, mercury(II) sulphide. Weaker signals in the Raman spectrum are assignable to a proteinaceous material, such as collagen, typical of a degraded vellum or parchment. Comparison of the Raman spectra with that of a pigmented seal from a 1786 Lieutenant's commission demonstrated that the beeswax component of the seal was not observable.

Surface-enhanced Raman spectroscopy (SERS) has been used to study, in situ, the molecular structure of an electrochromic device composed of a thin nanoporous, nanocrystalline film of anatase titania (TiO2) derivatised with the viologen 1-ethyl-1'-ethylphosphonato-4,4'-bipyridyl dichloride (EPV). Silver colloid solution was added to the surface of the TiO2 film to provide the SERS activity. Raman spectra of the EPV were obtained as the potential was varied, giving, a unique insight into the molecular structural changes giving rise to the electrochromic effect. The presence of the small amount of Ag colloid did not affect the performance of the device. Incorporation of silver particles directly into the TiO2 layer, instead of adding colloid solution to the surface, was not successful. (C) 2002 Elsevier Science B.V. All rights reserved.

Raman mapping by point illumination of polymer surfaces is discussed with examples taken from the plasma treatment of polypropylene (PP) and subsequent grafting of polystyrene (PS). Maps can be constructed for surface properties such as crystallinity, blend components and distribution of grafted PS. The Raman sampling volume was estimated for confocal operation using a 50x objective lens.

A number of different carbon-filled rubbers have been studied using infrared microspectroscopy with an attenuated total reflectance objective incorporating a silicon internal reflectance element (IRE). Excellent spectra were obtained of these difficult samples in a reasonable measurement time. The IRE had a contact face of 100 μm diameter which could be further apertured to improve the spatial resolution, but at the expense of the signal-to-noise ratio of the spectra. The minimum aperture size, which still produced an acceptable spectrum, was 40 μm. The spatial resolution was less than the aperture size because of the effect of the refractive index of the IRE. The method was applied to thermally aged rubbers by measuring spectra at intervals across a sectioned surface. Oxidation profiles were derived from the absorbances of oxygenated functional groups in the spectra and were found to agree with modulus profiles previously published. The IR-ATR microspectroscopic method is shown to be simple and effective because the measurement is made directly on the sectioned surface of the rubber without sacrificing the sample.

There is a growing need for new biodiagnostics that combine high throughput with enhanced spatial resolution and sensitivity. Gold nanoparticle (NP) assemblies with sub-10 nm particle spacing have the benefits of improving detection sensitivity via Surface enhanced Raman scattering (SERS) and being of potential use in biomedicine due to their colloidal stability. A promising and versatile approach to form solution-stable NP assemblies involves the use of multi-branched molecular linkers which allows tailoring of the assembly size, hot-spot density and interparticle distance. We have shown that linkers with multiple anchoring end-groups can be successfully employed as a linker to assemble gold NPs into dimers, linear NP chains and clustered NP assemblies. These NP assemblies with diameters of 30-120 nm are stable in solution and perform better as SERS substrates compared with single gold NPs, due to an increased hot-spot density. Thus, tailored gold NP assemblies are potential candidates for use as biomedical imaging agents. We observed that the hot-spot density and in-turn the SERS enhancement is a function of the linker polymer concentration and polymer architecture. New deep Raman techniques like Spatially Offset Raman Spectroscopy (SORS) have emerged that allow detection from beneath diffusely scattering opaque materials, including biological media such as animal tissue. We have been able to demonstrate that the gold NP assemblies could be detected from within both proteinaceous and high lipid containing animal tissue by employing a SORS technique with a backscattered geometry.

A miniaturized flow-through system consisting of a gold coated silicon substrate based on enhanced Raman spectroscopy has been used to study the detection of vapour from model explosive compounds. The measurements show that the detectability of the vapour molecules at room temperature depends sensitively on the interaction between the molecule and the substrate. The results highlight the capability of a flow system combined with Raman spectroscopy for detecting low vapour pressure compounds with a limit of detection of 0.2 ppb as demonstrated by the detection of bis(2-ethylhexyl)phthalate, a common polymer additive emitted from a commercial polyvinyl chloride (PVC) tubing at room temperature.

The grafting of polystyrene (PS) onto a predominantly polypropylene (PP) substrate has been followed by Raman and infrared microspectroscopic mapping. For exactly the same 50 μm × 50 μm section of polymer surface, Raman spectra were obtained at 1 μm intervals for the substrate, the surface after plasma treatment, and the surface after PS grafting. Maps of the substrate were constructed, indicating the crystallinity variation across the surface and also the distribution of the minor component ethylene-propylene rubber (EPR). After plasma treatment, the crystallinity was found to decrease slightly. Infrared microspectroscopic maps of a larger plasma-treated surface were also obtained with the technique of attenuated total reflection. The spatial resolution of these maps was 50 μm, and they showed the distribution of the hydroxy groups introduced onto the surface by the plasma treatment. PS grafting was found to be heterogeneous. Increased concentrations of grafted PS showed some correlation with positions on the surface which had higher EPR after plasma treatment.

An attenuated total reflectance (ATR) permeation cell has been used to evaluate the permeation of polymer samples from chemical protective clothing (CPC), mainly gloves, by several chemical types including a solvent, a commercial pesticide mix, and a volatile solid. Good contact between sample and ATR crystal was ensured by the use of low gas pressure. The passage of the chemicals through the CPC sample could be readily followed by analysis of sets of Fourier transform infrared (FT-IR) spectra measured during permeation experiments. Diffusion coefficients could only be estimated. The ATR method is compared with the traditional two-compartment cell used for evaluation of CPC, and its advantages and disadvantages are discussed.