Search

Background: Robotic-assisted total knee arthroplasty (RA-TKA) allows surgeons to perform intraoperative soft tissue laxity assessments prior to bone resections and is used to alter resections to achieve gap balance. This study compared 2 techniques for flexion gap laxity assessment during RA-TKA. Methods: A prospective study of 50 primary RA-TKAs performed by a single surgeon was conducted between February and October 2023. Following full exposure, anterior tibial dislocation, and osteophyte removal, maximal medial and lateral compartment flexion laxity was quantified to the nearest 0.5 mm by the robotic system using a dynamic, surgeon-applied stress (SURGEON). This data was used to plan a balanced flexion gap by adjusting the femoral component size, rotation, and anterior-posterior translation. Flexion laxity was quantified again after distal femoral and proximal tibial resections using a ligament tensor instrument (TENSOR). These new data were used to plan for the same desired flexion gap using the same variables. Paired-samples t-tests and a simple linear regression were used for analysis. Results: Both methods produced near-identical recommendations for femoral component sizing (mean deviation 0.06 sizes, range −1 to +1 size; P = .569), rotation (deviation mean 1.0°, range −3.0° to +3.0°; P = .741), and anterior-posterior translation (deviation mean 0.13 mm, range −0.5 to +0.5 mm, P = .785). SURGEON femoral component rotation predicted TENSOR rotation (R2 = 0.157; 95% confidence interval = 0.124, 0.633; P = .004). Conclusions: Assessing flexion laxity with a surgeon-applied stress vs a ligament tensor produced near-identical laxity data in RA-TKA, suggesting surgeons may comfortably choose either technique as a reliable method. Level of Evidence: Level III.

Background: Perioperative practices have been introduced over the last decade to decrease the risk of periprosthetic joint infection (PJI). We sought to determine whether rates of revision total knee arthroplasty (TKA) for PJI decreased during the period 2006-2016. Methods: This observational cohort study used data from the New York Statewide Planning and Research Cooperative System to identify patients undergoing TKA in 2006-2016. Data through 2017 were used to determine if patients underwent revision TKA for PJI (including debridement, antibiotics and implant retention) within 1 year of the primary surgery. A generalized estimating equation model, clustered by hospital, was used to examine the impact of time on likelihood of revision TKA for PJI. Results: In 2006-2016, 233,165 primary TKAs performed were included. Mean age was 66.1 (standard deviation 10.3) years, and 65% were women. Overall, 0.5% of the patients underwent revision TKA for PJI within 1 year of surgery. The generalized estimating equation model showed that for primary TKA performed in 2006-2013, year of surgery did not impact the likelihood of revision TKA for PJI (odds ratio 1.00, 95% confidence interval 0.97-1.03, P = .9221), but that for primary TKA performed in 2014-2016, the likelihood decreased by year (odds ratio 0.76, 95% confidence interval 0.66-0.88, P = .0002). Conclusions: The likelihood of revision TKA for PJI was stable from 2006 to 2013 but declined during the period 2014-2016 across patient and hospital categories. This decline could be due to infection mitigation strategies or other unmeasured factors.

Background: Hip dysplasia is considered one of the leading etiologies contributing to hip degeneration and the eventual need for total hip arthroplasty (THA). We validated a deep learning (DL) algorithm to measure angles relevant to hip dysplasia and applied this algorithm to determine the prevalence of dysplasia in a large population based on incremental radiographic cutoffs. Methods: Patients from the Osteoarthritis Initiative with anteroposterior pelvis radiographs and without previous THAs were included. A DL algorithm automated 3 angles associated with hip dysplasia: modified lateral center-edge angle (LCEA), Tönnis angle, and modified Sharp angle. The algorithm was validated against manual measurements, and all angles were measured in a cohort of 3869 patients (61.2 ± 9.2 years, 57.1% female). The percentile distributions and prevalence of dysplastic hips were analyzed using each angle. Results: The algorithm had no significant difference (P > .05) in measurements (paired difference: 0.3°-0.7°) against readers and had excellent agreement for dysplasia classification (kappa = 0.78-0.88). In 140 minutes, 23,214 measurements were automated for 3869 patients. LCEA and Sharp angles were higher and the Tönnis angle was lower (P < .01) in females. The dysplastic hip prevalence varied from 2.5% to 20% utilizing the following cutoffs: 17.3°-25.5° (LCEA), 9.4°-15.6° (Tönnis), and 41.3°-45.9° (Sharp). Conclusions: A DL algorithm was developed to measure and classify hips with mild hip dysplasia. The reported prevalence of dysplasia in a large patient cohort was dependent on both the measurement and threshold, with 12.4% of patients having dysplasia radiographic indices indicative of higher THA risk.

Background: The outcomes of revision total hip arthroplasty (rTHA) have become increasingly important as their volume increases. Computer navigation, a reliable method to improve component positioning during primary total hip arthroplasty (THA), is not well studied in the rTHA setting. Given that dislocation rates following rTHA are significantly higher than those of primary THA, component positioning becomes paramount in these cases. Methods: Here, we present two case reports and surgical techniques, one of a 77-year-old man undergoing rTHA for recurrent hip instability following primary THA, and one of a 61-year-old woman undergoing rTHA for severe iliopsoas bursitis who was at increased risk for instability and dislocation given her history of large segment spinal fusion. Results: Both patients achieved optimal acetabular component positioning after rTHA with imageless computer navigation. Conclusions: The use of imageless computer navigation in rTHA provides accurate and reproducible component positioning during acetabular rTHA.

Aims: Distal femoral resection in conventional total knee arthroplasty (TKA) utilizes an intramedullary guide to determine coronal alignment, commonly planned for 5° of valgus. However, a standard 5° resection angle may contribute to malalignment in patients with variability in the femoral anatomical and mechanical axis angle. The purpose of the study was to leverage deep learning (DL) to measure the femoral mechanical-anatomical axis angle (FMAA) in a heterogeneous cohort. Methods: Patients with full-limb radiographs from the Osteoarthritis Initiative were included. A DL workflow was created to measure the FMAA and validated against human measurements. To reflect potential intramedullary guide placement during manual TKA, two different FMAAs were calculated either using a line approximating the entire diaphyseal shaft, and a line connecting the apex of the femoral intercondylar sulcus to the centre of the diaphysis. The proportion of FMAAs outside a range of 5.0° (SD 2.0°) was calculated for both definitions, and FMAA was compared using univariate analyses across sex, BMI, knee alignment, and femur length. Results: The algorithm measured 1,078 radiographs at a rate of 12.6 s/image (2,156 unique measurements in 3.8 hours). There was no significant difference or bias between reader and algorithm measurements for the FMAA (p = 0.130 to 0.563). The FMAA was 6.3° (SD 1.0°; 25% outside range of 5.0° (SD 2.0°)) using definition one and 4.6° (SD 1.3°; 13% outside range of 5.0° (SD 2.0°)) using definition two. Differences between males and females were observed using definition two (males more valgus; p < 0.001). Conclusion: We developed a rapid and accurate DL tool to quantify the FMAA. Considerable variation with different measurement approaches for the FMAA supports that patient-specific anatomy and surgeon-dependent technique must be accounted for when correcting for the FMAA using an intramedullary guide. The angle between the mechanical and anatomical axes of the femur fell outside the range of 5.0° (SD 2.0°) for nearly a quarter of patients. Cite this article: Bone Jt Open 2024;5(2):101–108.

Aims: When performing revision total hip arthroplasty using diaphyseal-engaging titanium tapered stems (TTS), the recommended 3 to 4 cm of stem-cortical diaphyseal contact may not be available. In challenging cases such as these with only 2 cm of contact, can sufficient axial stability be achieved and what is the benefit of a prophylactic cable? This study sought to determine, first, whether a prophylactic cable allows for sufficient axial stability when the contact length is 2 cm, and second, if differing TTS taper angles (2° vs 3.5°) impact these results. Methods: A biomechanical matched-pair cadaveric study was designed using six matched pairs of human fresh cadaveric femora prepared so that 2 cm of diaphyseal bone engaged with 2° (right femora) or 3.5° (left femora) TTS. Before impaction, three matched pairs received a single 100 lb-tensioned prophylactic beaded cable; the remaining three matched pairs received no cable adjuncts. Specimens underwent stepwise axial loading to 2600 N or until failure, defined as stem subsidence > 5 mm. Results: All specimens without cable adjuncts (6/6 femora) failed during axial testing, while all specimens with a prophylactic cable (6/6) successfully resisted axial load, regardless of taper angle. In total, four of the failed specimens experienced proximal longitudinal fractures, three of which occurred with the higher 3.5° TTS. One fracture occurred in a 3.5° TTS with a prophylactic cable yet passed axial testing, subsiding < 5 mm. Among specimens with a prophylactic cable, the 3.5° TTS resulted in lower mean subsidence (0.5 mm (SD 0.8)) compared with the 2° TTS (2.4 mm (SD 1.8)). Conclusion: A single prophylactic beaded cable dramatically improved initial axial stability when stem-cortex contact length was 2 cm. All implants failed secondary to fracture or subsidence > 5 mm when a prophylactic cable was not used. A higher taper angle appears to decrease the magnitude of subsidence but increased the fracture risk. The fracture risk was mitigated by the use of a prophylactic cable. Cite this article: Bone Jt Open 2023;4(7):472–477.

The combination of an aging population and increased utilization of total hip arthroplasty (THA) is leading to a higher incidence of conversion THA, defined as conversion from previous hip fracture surgery to THA. Conversion THA is a more technically challenging, time-consuming, and costly procedure compared to primary THA and frequently involve more medically complex patients.Thus, the aim of this review is to provide a rubric for surgeons to use when preparing for a conversion THA. We have assessed the compatibility of commonly available extraction devices with popular femoral nails. Furthermore, we review technical pearls for conversion THA including equipment planning, operative setup, intraoperative imaging, extraction sequencing, and troubleshooting commonly encountered obstacles.

Aims: Mid-level constraint designs for total knee arthroplasty (TKA) are intended to reduce coronal plane laxity. Our aims were to compare kinematics and ligament forces of the Zimmer Biomet Persona posterior-stabilized (PS) and mid-level designs in the coronal, sagittal, and axial planes under loads simulating clinical exams of the knee in a cadaver model. Methods: We performed TKA on eight cadaveric knees and loaded them using a robotic manipulator. We tested both PS and mid-level designs under loads simulating clinical exams via applied varus and valgus moments, internal-external (IE) rotation moments, and anteroposterior forces at 0°, 30°, and 90° of flexion. We measured the resulting tibiofemoral angulations and translations. We also quantified the forces carried by the medial and lateral collateral ligaments (MCL/LCL) via serial sectioning of these structures and use of the principle of superposition. Results: Mid-level inserts reduced varus angulations compared to PS inserts by a median of 0.4°, 0.9°, and 1.5° at 0°, 30°, and 90° of flexion, respectively, and reduced valgus angulations by a median of 0.3°, 1.0°, and 1.2° (p ≤ 0.027 for all comparisons). Mid-level inserts reduced net IE rotations by a median of 5.6°, 14.7°, and 17.5° at 0°, 30°, and 90°, respectively (p = 0.012). Mid-level inserts reduced anterior tibial translation only at 90° of flexion by a median of 3.0 millimetres (p = 0.036). With an applied varus moment, the mid-level insert decreased LCL force compared to the PS insert at all three flexion angles that were tested (p ≤ 0.036). In contrast, with a valgus moment the mid-level insert did not reduce MCL force. With an applied internal rotation moment, the mid-level insert decreased LCL force at 30° and 90° by a median of 25.7 N and 31.7 N, respectively (p = 0.017 and p = 0.012). With an external rotation moment, the mid-level insert decreased MCL force at 30° and 90° by a median of 45.7 N and 20.0 N, respectively (p ≤ 0.017 for all comparisons). With an applied anterior load, MCL and LCL forces showed no differences between the two inserts at 30° and 90° of flexion. Conclusion: The mid-level insert used in this study decreased coronal and axial plane laxities compared to the PS insert, but its stabilizing benefit in the sagittal plane was limited. Both mid-level and PS inserts depended on the MCL to resist anterior loads during a simulated clinical exam of anterior laxity. Cite this article: Bone Jt Open 2023;4(6):432–441.

AimsAccurate identification of the ankle joint centre is critical for estimating tibial coronal alignment in total knee arthroplasty (TKA). The purpose of the current study was to leverage artificial intelligence (AI) to determine the accuracy and effect of using different radiological anatomical landmarks to quantify mechanical alignment in relation to a traditionally defined radiological ankle centre.MethodsPatients with full-limb radiographs from the Osteoarthritis Initiative were included. A sub-cohort of 250 radiographs were annotated for landmarks relevant to knee alignment and used to train a deep learning (U-Net) workflow for angle calculation on the entire database. The radiological ankle centre was defined as the midpoint of the superior talus edge/tibial plafond. Knee alignment (hip-knee-ankle angle) was compared against 1) midpoint of the most prominent malleoli points, 2) midpoint of the soft-tissue overlying malleoli, and 3) midpoint of the soft-tissue sulcus above the malleoli.ResultsA total of 932 bilateral full-limb radiographs (1,864 knees) were measured at a rate of 20.63 seconds/image. The knee alignment using the radiological ankle centre was accurate against ground truth radiologist measurements (inter-class correlation coefficient (ICC) = 0.99 (0.98 to 0.99)). Compared to the radiological ankle centre, the mean midpoint of the malleoli was 2.3 mm (SD 1.3) lateral and 5.2 mm (SD 2.4) distal, shifting alignment by 0.34o (SD 2.4o) valgus, whereas the midpoint of the soft-tissue sulcus was 4.69 mm (SD 3.55) lateral and 32.4 mm (SD 12.4) proximal, shifting alignment by 0.65o (SD 0.55o) valgus. On the intermalleolar line, measuring a point at 46% (SD 2%) of the intermalleolar width from the medial malleoli (2.38 mm medial adjustment from midpoint) resulted in knee alignment identical to using the radiological ankle centre.ConclusionThe current study leveraged AI to create a consistent and objective model that can estimate patient-specific adjustments necessary for optimal landmark usage in extramedullary and computer-guided navigation for tibial coronal alignment to match radiological planning.Cite this article: Bone Jt Open 2022;3(10):767–776.

Abstract A subset of patients undergoing total knee arthroplasty (TKA) for knee osteoarthritis develop debilitating knee stiffness (reduced range of motion) for poorly understood reasons. Dysregulated inflammatory and immune responses to surgery correlate with reduced surgical outcomes, but the dysregulated gene signatures in patients with stiffness after TKA are poorly defined. As a consequence, we are limited in our ability to identify patients at risk of developing poor surgical outcomes and develop preventative approaches. In this pilot study we aimed to identify perioperative blood gene signatures in patients undergoing TKA for knee osteoarthritis and its association with early surgical outcomes, specifically knee range of motion. To do this, we integrated clinical outcomes collected at 6 weeks after surgery with transcriptomics analyses in blood samples collected immediately before surgery and at 24 h after surgery. We found that patients with stiffness at 6 weeks after surgery have a more variable and attenuated circulating gene expression response immediately after surgery. Our results suggest that patients with stiffness following TKA may have distinct gene expression signatures detectable in peripheral blood in the immediate postoperative period.

Aims: Navigation devices are designed to improve a surgeon’s accuracy in positioning the acetabular and femoral components in total hip arthroplasty (THA). The purpose of this study was to both evaluate the accuracy of an optical computer-assisted surgery (CAS) navigation system and determine whether preoperative spinopelvic mobility (categorized as hypermobile, normal, or stiff) increased the risk of acetabular component placement error. Methods: A total of 356 patients undergoing primary THA were prospectively enrolled from November 2016 to March 2018. Clinically relevant error using the CAS system was defined as a difference of > 5° between CAS and 3D radiological reconstruction measurements for acetabular component inclination and anteversion. Univariate and multiple logistic regression analyses were conducted to determine whether hypermobile (Δsacral slope(SS)stand-sit > 30°), or stiff (ΔSSstand-sit < 10°) spinopelvic mobility contributed to increased error rates. Results: The paired absolute difference between CAS and postoperative imaging measurements was 2.3° (standard deviation (SD) 2.6°) for inclination and 3.1° (SD 4.2°) for anteversion. Using a target zone of 40° (± 10°) (inclination) and 20° (± 10°) (anteversion), postoperative standing radiographs measured 96% of acetabular components within the target zone for both inclination and anteversion. Multiple logistic regression analysis controlling for BMI and sex revealed that hypermobile spinopelvic mobility significantly increased error rates for anteversion (odds ratio (OR) 2.48, p = 0.009) and inclination (OR 2.44, p = 0.016), whereas stiff spinopelvic mobility increased error rates for anteversion (OR 1.97, p = 0.028). There were no dislocations at a minimum three-year follow-up. Conclusion: Despite high reliability in acetabular positioning for inclination in a large patient cohort using an optical CAS system, hypermobile and stiff spinopelvic mobility significantly increased the risk of clinically relevant errors. In patients with abnormal spinopelvic mobility, CAS systems should be adjusted for use to avoid acetabular component misalignment and subsequent risk for long-term dislocation. Cite this article: Bone Jt Open 2022;3(6):475–484.

Background: Periprosthetic femur fracture following total knee arthroplasty (TKA) is a devastating complication. Although trauma-related periprosthetic femur fractures have been well studied, early atraumatic insufficiency periprosthetic fractures (IPFs) are gaining attention. We present the largest IPF series to date to better understand and prevent this complication. Methods: A retrospective study of all patients who underwent a revision surgery for periprosthetic fracture within 6 months of primary TKA between 2007 and 2020 was performed. Patient demographics, preoperative radiographs, implant details, and fracture radiographs were reviewed. Alignment measurements and fracture characteristics were assessed. Results: Sixteen patients met criteria (rate 0.05%), and 11 had posterior-stabilized TKAs. The mean age was 79 years, mean body mass index was 31 kg/m2, and 94% (15/16) were female. Seven (47%) patients had a confirmed history of osteoporosis. IPF occurred on average 4 weeks (range, 4 days-13 weeks) after the index TKA. Overall, 12 of 16 (73%) had preoperative valgus deformities, and 11 patients (10 valgus, 1 varus) had preoperative deformities >10 degrees. A characteristic radiographic appearance of femoral condylar impaction and collapse was noted in 12 of 16 cases (75%); 11 of these 12 fractures (92%) involved the unloaded compartment based on preoperative varus/valgus deformity. Conclusions: Patients who developed IPFs were most commonly elderly, obese women with osteoporosis and severe preoperative valgus deformities. The apparent mechanism of failure was overloading of previously unloaded osteopenic femoral condyle. In high-risk patients, the use of a cruciate-retaining femoral component or a femoral stem for a posterior-stabilized femur may be considered to help avoid this catastrophic complication.

Background: Dissolvable antibiotic-loaded calcium sulfate beads are used as an intraoperative adjunct during debridement with antibiotics and implant retention (DAIR) for periprosthetic joint infections (PJI) to reduce the historically higher failure rates than one- or two-stage exchange. This study evaluated clinical outcomes after DAIRs performed with and without these antibiotic beads. The primary outcome was post-DAIR failure secondary to recurrent PJI at 2 years. The secondary outcome was early failure secondary to recurrent PJI within 90 days. Material and methods: DAIRs performed for acute or acute hematogenous PJI at a single institution were retrospectively identified between 2013 and 2018. All DAIRs with adjunctive antibiotic beads (cases) were then exactly matched to a cohort of DAIRs without beads (controls) based on Charlson Comorbidity Index. The McNemar’s test and Wilcoxon signed-rank test were used to evaluate differences in outcomes and patient characteristics. Results: Twenty DAIR cases (with antibiotic beads) were matched with 20 DAIR controls. There was no difference in age, sex, body mass index, joint, erythrocyte sedimentation rate, C-reactive protein, microbiology profile, antibiotic-resistance profile, or intraoperative lavage adjuncts between groups. There were no statistically significant differences between cases and controls for either overall infection-related failure at 2 years (P = .21) or early infection-related failure at 90 days (P = 1.00). Conclusion: Adjunctive dissolvable antibiotic-loaded calcium sulfate beads did not reduce the incidence of recurrent PJIs at 2 years or 90 days postoperatively after DAIR. Given the added cost of these antibiotic dissolvable beads without clinical benefits, we cannot recommend their use as an adjunct treatment during DAIRs.

Background: The extent to which hemoglobinopathies other than sickle anemia (HbSS) are associated with hip osteonecrosis is unknown. Sickle cell trait (HbS), hemoglobin SC (HbSC), and sickle/β-thalassemia (HbSβTh) may also predispose to osteonecrosis of the femoral head (ONFH). We sought to compare the distributions of indications for a total hip arthroplasty (THA) in patients with and without specific hemoglobinopathies. Methods: PearlDiver, an administrative claims database, was used to identify 384,401 patients aged 18 years or older undergoing a THA not for fracture from 2010 to 2020, with patients grouped by diagnosis code (HbSS N = 210, HbSC N = 196, HbSβTh N = 129, HbS N = 356). β-Thalassemia minor (N = 142) acted as a negative control, and patients without hemoglobinopathy as a comparison group (N = 383,368). The proportion of patients with ONFH was compared to patients without it by hemoglobinopathy groups using chi-squared tests before and after matching on age, sex, Elixhauser Comorbidity Index, and tobacco use. Results: The proportion of patients with ONFH as the indication for THA was higher among those with HbSS (59%, P < .001), HbSC (80%, P < .001), HbSβTh (77%, P < .001), and HbS (19%, P < .001) but not with β-thalassemia minor (9%, P = .6) than the proportion of patients without hemoglobinopathy (8%). After matching, the proportion of patients with ONFH remained higher among those with HbSS (59% vs 21%, P < .001), HbSC (80% vs 34%, P < .001), HbSβTh (77% vs 26%, P < .001), and HbS (19% vs 12%, P < .001). Conclusions: Hemoglobinopathies beyond sickle cell anemia were strongly associated with having osteonecrosis as the indication for THA. Further research is needed to confirm whether this modifies THA outcomes.

Background: Questions exist about the release of cobalt and chromium ions from dual mobility (DM) cups. Modular implants, with potential backside wear between the cobalt-chromium liner and titanium cup, are of particular concern. This study compares the metal ion profile of patients with contemporary monoblock and modular DM articulations from two commonly used designs. Methods: Cobalt and chromium serum levels were measured one year after surgery in a prospective cohort of patients undergoing total hip arthroplasty with a DM construct. Ion levels were detected above 1 μg/L. Clinical and surgical data were correlated with the ion levels for analysis. Results: Overall, 29% of the patients had levels above 1 μg/L of either ion. More patients with modular cups had detectable ions than patients with monoblock cups (39% vs 20%, P = .05). Cobalt was more commonly detected in the monoblock group, and chromium was more commonly detected in the modular group (P = .05). There were no differences in the actual ion levels between the groups (1.35 μg/L vs 1.64 μg/L, P = .44, for cobalt and 1.35 μg/L vs 1.31 μg/L, P = .77, for chromium). No patient underwent revision during the follow-up period. Conclusions: We found similar cobalt and chromium levels in patients with monoblock and modular DM cups. More patients in the modular group had detectable ions. Cobalt was more frequently detected in the monoblock group. These results suggest that both implants are performing well in the short term, but further follow-up is needed to determine whether the differences found are of clinical significance.

In this case report, we present a rare case of a female patient who developed pain and swelling after a total knee arthroplasty. An extensive diagnostic workup including serum and synovial testing to rule out infection was performed in addition to advanced imaging including an MRI of the knee, but it was only after an arthroscopic synovectomy that the diagnosis of secondary synovial chondromatosis was confirmed. The purpose of this case report is to highlight the occurrence of secondary synovial chondromatosis as a rare cause of pain and swelling after total knee arthroplasty, thereby assisting clinicians in providing prompt diagnosis, surgical treatment, and efficient recovery in the setting of secondary synovial chondromatosis after total knee arthroplasty.

Autoimmunity mediated by age-associated B cells (ABC) can affect males and females differently. Here, using a lupus-like mouse model that affects females more severely, the authors observe an ABC mediated and guanine nucleotide exchange factor (GEF) restrained pathogenic process involving TLR7.

Background: Metaphyseal cones provide durable fixation in revision total knee arthroplasty (TKA). However, there is a paucity of data on the outcomes of a new porous cone design. As such, the goal of this study was to analyze the early survivorship in patients undergoing revision TKA with this cone. Methods: We retrospectively reviewed 163 revision TKAs with a newly designed porous tibial cone from 2016 to 2018. Mean age was 67 years, and mean body mass index was 33 kg/m2. Minimum follow-up duration was 2 years. Most patients were revised for aseptic loosening (46%), 2-stage periprosthetic joint infection (PJI) reimplantation (28%), or instability (15%). Most were varus-valgus constrained (65%) or hinged (32%) constructs. The majority had hybrid tibial stem fixation (74%). A multivariate Cox regression analysis was used to identify risk factors for reoperation. Results: Survivorship free from re-revision for aseptic loosening, any nonmodular revision, and any reoperation was 100%, 96%, and 86% at 2 years, respectively. No patients were revised for aseptic loosening. Six (4%) tibial cones were removed for PJI, one of which was loose. There were 23 reoperations (14%), most commonly for PJI (10%). Multivariate analysis identified PJI reimplantation (hazard ratios [HR] = 4.2, P = .002), males (HR = 2.9, P = .02), and hinged constructs (HR = 2.7, P = .02) as significant risk factors for reoperation. Conclusions: In a complex revision TKA cohort with a new highly porous tibial cone, in which most patients received hybrid stem fixation and nonlinked and linked constraint, there was 100% survival free from re-revision for aseptic loosening at 2 years. Longer term follow-up is required.

Early periprosthetic fractures after total knee arthroplasty are rare but devastating complications which require revision surgery and lead to poor patient satisfaction. We present 2 siblings who underwent primary total knee arthroplasty on the same day and then both presented 2 weeks after surgery with atraumatic periprosthetic femur fractures. The first patient underwent revision for a cemented distal femoral replacement with stemmed tibial fixation. The second patient underwent an isolated femoral component revision with a stemmed femoral component and distal augment. Histological evaluation identified significant peri-implant osteoporosis. The variation in complexity associated with early periprosthetic femoral insufficiency fractures is highlighted by these 2 cases. Surgeons may consider using stemmed femoral components in similar patients if poor distal femoral bone stock is encountered intraoperatively.

Background: The optimal route and dosing regimen of tranexamic acid (TXA) in primary total hip arthroplasty (THA) and total knee arthroplasty (TKA) remain unclear. As such, we sought to analyze if there was a synergistic effect of intravenous (IV) and topical TXA on blood loss and transfusions. Methods: We retrospectively analyzed 6720 primary TKAs and 6559 THAs performed from February 1, 2016 to December 31, 2019 at a single institution in patients who received a double IV dose (6159 TKAs and 6276 THAs) compared with a combined single IV and topical dose (561 TKAs and 283 THAs) of TXA. Multivariate logistic regression models, adjusting for age, body mass index, American Society of Anesthesiologists class, preoperative hemoglobin, and TXA administration, were performed for significant variables from a univariate analysis. Results: In the TKA cohort, the mean total blood loss was statistically similar for double IV (305 mL, 95% confidence interval [CI] = 301-310 mL) TXA compared with combined TXA (310 mL, 95% CI = 299-321 mL) (P = .43). Furthermore, there was no difference in the rate of transfusion (odds ratio = 1.23, 95% CI = 0.57-2.67, P = .598). In the THA cohort, there was statistically higher blood loss with double IV (328 mL, 95% CI = 323-333 mL) TXA than in the combined group (295 mL, 95% CI = 280-310 mL) (P < .001). The rate of transfusion was statistically similar at ~2% (P = .970). Conclusions: A double IV TXA dose and a combined single IV and topical TXA dose were equally effective in minimizing blood transfusions (~2%) at primary TKA and THA. We did not find a synergistic effect when combining a systemic IV TXA with a topical TXA. Level of Evidence: Level III.

Background: Changes in acetabular or hip center of rotation (HCOR) commonly occur during acetabular component preparation during total hip arthroplasty (THA). HCOR displacement in mediolateral or superoinferior directions is known to influence offset and leg length, but the incidence and range of HCOR change in the anteroposterior direction is less understood as the sagittal plane cannot be measured on standard anteroposterior radiographs. This study assessed the 3-dimensional displacement of HCOR after cup implantation and evaluated for potential factors associated with increased acetabular component translations. Methods: A total of 894 THAs were performed using a posterior, lateral, or direct anterior approach. Only intraoperative data from the navigation device were included in the analysis. All THAs performed between September 2015 and October 2017 were included. Paired t-tests were used to compare native HCOR and new HCOR values. Results: The mean HCOR displacement in 3 directions was 4.97mm medially (P < .001), 0.83mm superiorly (P < .001), and 0.64mm posteriorly (P < .001). Subgroup analysis revealed greater posterior HCOR displacement with the anterior approach than the lateral/posterior approach (2.32mm vs 0.44mm; P < .001). Increasing medial HCOR displacement also resulted in increased superior and posterior HCOR displacement across surgical cases (P < .001). Conclusions: HCOR displacement is commonly observed in medial, superior, and posterior directions. HCOR changes are influenced by surgical approach, potentially secondary to patient positioning, with greater posterior HCOR displacement observed in anterior cases. Surgeons should be aware of these factors, particularly in cases with deficient or reduced posterior column bone stock.

We present a rare case of a patient who presented with complete and rapid wear-through of a ceramic femoral head through a polyethylene liner and titanium acetabular cup. In addition, this patient exhibited significantly elevated serum titanium ion levels, which may serve as a marker of severe metallosis in cases where the preoperative plain radiographs underestimate signs of periarticular metal debris. The unique findings of this case include the rapid (less than 1 year time) wear-through of the femoral head in interval radiographs and the dramatic progression of metallosis and pelvic and femoral osteolysis that required both component revision. In addition, the markedly elevated titanium levels secondary to cup wear-through are also of interest and demonstrate a systemic manifestation of abrasive wear of a titanium alloy component. Keywords: Total hip arthroplasty, Revision arthroplasty, Wear-through cup failure, Catastrophic failure, Osteolysis, Ceramic on poly

Revision total hip arthroplasty in the setting of acetabular bone loss is a challenging procedure and requires a solid understanding of current acetabular reconstruction options. Despite major developments in the field of revision hip surgery in recent decades, reconstruction of acetabular defects remains a major problem in order to achieve primary stability and durable fixation without sacrificing additional bone stock. Although there are several ways to classify acetabular bone defects, the Paprosky classification system is the most commonly used to describe the defects and guide treatment strategy. An understanding of the bone defects associated with detailed pre-operative assessment and planning are essential elements in order to achieve satisfactory outcomes. Multiple acetabular reconstructive options are currently available including impaction bone grafting with metal mesh, reinforcement rings and antiprotrusio cage, structural allografts, cementless hemispherical cups, extra-large “jumbo cups”, oblong cups, modular porous metal augments, cup-cage constructs, custom- made triflange cups, and acetabular distraction. To date, debate continues as to which technique is most effective due to the lack of long-term studies of modern reconstruction systems. Further long-term studies are necessary to assess the longevity of the different implants. The purpose of this study was to review the current literature and provide a comprehensive understanding of the available reconstruction options with their clinical outcomes.

Total hip arthroplasty (THA) is considered the most successful orthopedic surgical procedure of the last century with excellent survivorship up to 20-years. However, instability remains a major issue representing the most common reason for revision after THA. Hip-spine relationship has gained progressive interest between arthroplasty surgeons and its understanding is crucial in order to identify high-risk patients for postoperative dislocation. Spinal deformity and abnormal spinopelvic mobility have been associated with increased risk for instability, dislocation and revision THA. Preoperative workup begins with standing anteroposterior pelvis x-ray and lateral spinopelvic radiographs in the standing and sitting position. Hip-spine stiffness needs to be addressed before THA in consideration of adapting the preoperative planning to the patient’s characteristics. Acetabular component should be implanted with different anteversion and inclination angles according to the pattern of hip-spine motion in order to reduce the risk of impingement and consequent dislocation. Different algorithmic approaches have been proposed in case of concomitant hip-spine disease and in case of altered sagittal balance and pelvic mobility. The aim of this review is to investigate and clarify the hip-spine relationships and evaluate the impact on modern total hip arthroplasty.

Total knee arthroplasty (TKA) is a highly successful operation that improves patients’ quality of life and functionality. Yet, up to 20% of TKA patients remain unsatisfied with the functional outcomes. Robotic TKA has gained increased attention and popularity in order to improve patient satisfaction and implant survivorship by increasing accuracy and precision of component implantation. The current systematic review was run in order to compare implant survivorship, complication rates, clinical outcomes, and radiological outcomes between robotic-assisted TKA (RA) and conventional manual TKA (CM). Articles were referenced from the US National Library of Medicine (PubMed/MEDLINE), EMBASE, and the Cochrane Database of Systematic Reviews. Nine comparative studies with 1199 operated knees in 1159 patients were included, 614 underwent active or semiactive robotic-assisted TKA compared to 585 CM-TKA. Improvements in the RA group were reported for early functional outcomes, radiographic outliers (RA 16% vs CM 76%) and radiolucent lines (RA 0% vs CM 35%). No significant differences between the two groups were reported in overall survivorship (RA 98.3% vs CM 97.3%), complication rate (RA 2.4% vs CM 1.4%) and operative time (RA 88 min vs CM 79 min). Despite higher costs, roboticassisted TKA offers better short-term clinical outcomes when compared to conventional manual technique with reduction in radiographic outliers and reduced risks of iatrogenic soft tissues injuries (reduced blood loss and postoperative drainage). Further high-quality long-term studies of modern robotic systems are required in order to evaluate how the increased accuracy and reduced outliers affect the long-term survivorship of the implants and the clinical outcomes.

Constrained acetabular liners have been developed for patients who are at high risk for dislocation or who are undergoing revision surgery for recurrent dislocations. We report on 2 cases of failure of tripolar constrained liners due to severe backside polyethylene wear after dissociation of the outer polyethylene liner without dislocation, a mode of failure not previously reported. The backside of the inserts suffered severe polyethylene deformation, wear, and scratching due to dissociation from the locking mechanism. In patients with tripolar constrained liners, radiographic evidence of eccentric wear should be considered as possible occult dissociation of the polyethylene liner within the shell. Conversion to a modular dual mobility liner appears to be a viable solution in this setting. Keywords: Revision total hip arthroplasty, Dislocation, Tripolar constrained liner, Modular dual mobility

Fractures of well-ingrown femoral components are a rare and often challenging complication after revision total hip arthroplasty. Prior series have documented catastrophic failure at the modular junction of revision femoral components. However, to the authors' knowledge, there has been only 1 report of a mid-stem fracture of a modular tapered revision stem. The present article reports 2 cases of fatigue fractures (14 months and 10 years after implantation) of a tapered modular revision stem. It presents the results of the fracture surface analysis, discusses the etiology of failure, and presents the authors' recommendations on how to best avoid this complication. Keywords: Stem fracture, Tapered, Removal technique, Breakage, Failure

Fracture of a well-ingrown femoral component is a rare and often challenging complication. Modular junctions and sleeve interfaces have been identified as one potential point of weakness with corrosion and fretting being contributing factors to ultimate femoral component fracture. Stem fractures at the sleeve interface were reported occasionally for the proximal ingrowth modular Emperion System (Smith and Nephew, Memphis, TN). However, this failure mechanism has been reported infrequently, often associated with corrosion at the modular junction, for the similarly designed S-ROM system (DePuy Orthopedics Inc., Warsaw, IN). We present the case of a 52-year-old patient, with a body weight of 84 kg (185 lbs) and a body mass index of 30.6 kg/m2, who suffered a fatigue fracture of a 14 × 09 × 130 mm S-ROM stem 42 months after implantation. The present study presents the results of the surface analysis, discusses possible failure mechanisms, provides treatment guidelines, and a review of the literature revealing 15 cases of failure at the level of the stem-sleeve junction. In particular, modifiable risk factors for potential stem failure, including stem diameter, stem offset, and the resulting cantilever bending forces on the proximal sleeve-stem junction, are discussed in detail. Keywords: Stem fracture, Removal technique, Breakage, Failure, Corrosion

Abstract Background Our objective in this study was to examine whether stakeholders further endorse the core domain set proposed by the Outcome Measures in Rheumatology Trials (OMERACT) total joint replacement (TJR) working group. Methods We emailed a survey to 3810 hip/knee arthroplasty patients and 49 arthroplasty surgeons at a high-volume arthroplasty center to rate the importance of each core domain (i.e., pain, function, patient satisfaction, revision surgery, adverse events, and death) and two additional domains (i.e., cost and participation). Ratings were on a 1–9 scale, with 1–3 indicating limited or no importance for patients, 4–6 being important but not critical, and 7–9 being critical. We calculated median (IQR) values and compared ratings by sex, age, and participant type using the Wilcoxon rank-sum test. Results The questionnaire was completed by 1295 patients (34%) and 21 surgeons (43%). Patient nonresponders were similar to responders in age (≥55 years, 85.7% vs. 88.6%), sex (female, 57.5% vs. 57.3%), and joint procedure (total hip replacement, 56.9% vs. 63.2%). Overall, all core domains and one noncore domain (i.e., participation) were confirmed as “critical” by both stakeholder groups. Cost was rated as only “important” but not “critical” by surgeons. A completed consensus for all the core domains persisted even when we stratified by sex, age, arthritis type, and the affected joint (knee vs. hip). We received suggestions for additional critical domains from 217 patients and 5 surgeons, prompting the inclusion of 2 research agenda items. Conclusions Our study confirmed a consensus rating of the OMERACT TJR core domain set as critical for patients. This broad endorsement should encourage the identification of candidate outcome instruments to further develop a TJR core measurement set that can harmonize reporting in TJR clinical trials.

Background: Dual mobility implants are subject to a specific implant-related complication, intraprosthetic dislocation (IPD), in which the polyethylene liner dissociates from the femoral head. For older generation designs, IPD was attributable to late polyethylene wear and subsequent failure of the head capture mechanism. However, early IPDs have been reportedly affecting contemporary designs. Methods: A systematic review of the literature according to the preferred reporting items for systematic reviews and meta-analyses guidelines was performed. A comprehensive search of PubMed, MEDLINE, Embase, and Google Scholar was conducted for English articles between January 1974 and August 2016 using various combinations of the keywords “intraprosthetic dislocation,” “dual mobility,” “dual-mobility,” “tripolar,” “double mobility,” “double-mobility,” “hip,” “cup,” “socket,” and “dislocation.” Results: In all, 16 articles met our inclusion criteria. Fourteen were case reports and 2 were retrospective case series. These included a total of 19 total hip arthroplasties, which were divided into 2 groups: studies dealing with early IPD after attempted closed reduction and those dealing with early IPD with no history of previous attempted closed reduction. Early IPD was reported in 15 patients after a mean follow-up of 3.2 months (2.9 SD) in the first group and in 4 patients after a mean follow-up of 15.1 months (9.9 SD) in the second group. Conclusions: Based on the current data, most cases have been preceded by an attempted closed reduction in the setting of outer, large articulation dislocation, perhaps indicating an iatrogenic etiology for early IPD. Recognition of this possible failure mode is essential to its prevention and treatment.

Correction Unfortunately, after publication of this article [1], it was noticed that Table 2 was not correctly formatted during the production process. The corrected Table 2 can be seen below and the original article has been updated to match.