Search

The infrared (IR) satellite remote sensing of sea surface skin temperature (SSTskin) is challenging in the northern high-latitude region, especially in the Arctic because of its extreme environmental conditions, and thus the accuracy of SSTskin retrievals is questionable. Several Saildrone uncrewed surface vehicles were deployed at the Pacific side of the Arctic in 2019, and two of them, SD-1036 and SD-1037, were equipped with a pair of IR pyrometers on the deck, whose measurements have been shown to be useful in the derivation of SSTskin with sufficient accuracy for scientific applications, providing an opportunity to validate satellite SSTskin retrievals. This study aims to assess the accuracy of MODIS-retrieved SSTskin from both Aqua and Terra satellites by comparisons with collocated Saildrone-derived SSTskin data. The mean difference in SSTskin from the SD-1036 and SD-1037 measurements is ~0.4 K, largely resulting from differences in the atmospheric conditions experienced by the two Saildrones. The performance of MODIS on Aqua and Terra in retrieving SSTskin is comparable. Negative brightness temperature (BT) differences between 11 μm and 12 μm channels are identified as being physically based, but are removed from the analyses as they present anomalous conditions for which the atmospheric correction algorithm is not suited. Overall, the MODIS SSTskin retrievals show negative mean biases, −0.234 K for Aqua and −0.295 K for Terra. The variations in the retrieval inaccuracies show an association with diurnal warming events in the upper ocean from long periods of sunlight in the Arctic. Also contributing to inaccuracies in the retrieval is the surface emissivity effect in BT differences characterized by the Emissivity-introduced BT difference (EΔBT) index. This study demonstrates the characteristics of MODIS-retrieved SSTskin in the Arctic, at least at the Pacific side, and underscores that more in situ SSTskin data at high latitudes are needed for further error identification and algorithm development of IR SSTskin.

Abstract Passive microwave (PM) observations have been used to monitor ice retreat in the Arctic. However, various PM sea ice concentration (SIC) algorithms are prone to underestimate ice fraction during summer. We evaluated the accuracy of 2002–2019 low SICs in the Central Arctic Ocean of four PM products from the University of Bremen, the National Snow and Ice Data Center (NSIDC), and the Ocean and Sea Ice Satellite Application Facility (OSI SAF), and two reanalysis data sets from the fifth generation of European ReAnalysis (ERA5) and the Modern‐Era Retrospective analysis for Research and Applications, Version 2 (MERRA‐2). Three reference fields were used: (a) Moderate Resolution Imaging Spectroradiometer (MODIS) and Visible Infrared Imaging Radiometer Suite (VIIRS) true‐color composites, (b) MODIS sea ice extent, and (c) multi‐product ensemble (MPE‐SIC) comprising the median of collocated SIC estimates. Our results indicate SICs derived from the Advanced Microwave Scanning Radiometer ‐ Earth Observing System (AMSR‐E) and the Advanced Microwave Scanning Radiometer 2 (AMSR2) high frequency channels have the best accuracy. Reanalysis SICs indicate almost identical patterns as their remote sensing inputs. The assessment shows that the Bremen (+1.06%) and NSIDC (+0.99%) SICs are higher than the median field, while the OSI‐401 (−6.65%) and OSI‐408 (−4.64%) have negative mean deviations. The mean error of MODIS‐derived SIC (−0.80%) is smaller than PM SICs. These small mean values belie wide distributions of values. The correlation coefficients of pairs of time series of Low sea‐Ice Concentration Index range from 0.37 to 0.96.

Abstract The eruption of Hunga Tonga‐Hunga Ha'apai (HTHH) volcano on 15 January 2022 injected a great amount of H2O and a moderate amount of SO2 into the stratosphere, producing a pronounced and persistent sulfate aerosol layer centered around the mid‐stratosphere, mostly confined to Southern Hemisphere (SH) tropics. These aerosols affect the Moderate Resolution Imaging Spectroradiometer (MODIS) retrievals of sea surface temperature (SST) where negative biases reached −0.3 K and an annual mean of −0.1 K north of 40°S in the SH. The spatial and temporal evolutions of MODIS SST anomalies are presented. Radiative transfer simulations demonstrate the aerosol effect on MODIS SST retrievals by causing an additional brightness temperature (BT) deficit at 11 μm and a reduction in BT differences since the characteristic of spectral attenuation between 11 and 12 μm is opposite to that of H2O. A correction for HTHH aerosol effects in the retrieval algorithm is therefore desirable.

Abstract The existence of a cool sea surface skin layer in the global ocean during both day and night is generally recognized. However, a warm skin should be present if the total surface net heat flux (Qnet) were to be from the atmosphere into ocean. Saildrone, an advanced uncrewed surface vehicle, has been shown to be able to provide sufficiently accurate sea skin temperature (SSTskin) and subsurface temperature (SSTdepth) data at high latitudes. Using those SST data along with meteorological parameters from a Saildrone deployed in the Arctic in the summer of 2019, some warm skin layers were identified due to the Qnet gain resulting from the combined effect of positive air‐sea temperature difference, humid surface air and cloudy skies. Furthermore, most warm skins here were found during and shortly after rainfall events. It is essential to incorporate the ability to simulate warm skin layers in the present cool skin models.

Sea-surface petroleum pollution is observed as “oil slicks” (i.e., “oil spills” or “oil seeps”) and can be confused with “look-alike slicks” (i.e., environmental phenomena, such as low-wind speed, upwelling conditions, chlorophyll, etc.) in synthetic aperture radar (SAR) measurements, the most proficient satellite sensor to detect mineral oil on the sea surface. Even though machine learning (ML) has become widely used to classify remotely-sensed petroleum signatures, few papers have been published comparing various ML methods to distinguish spills from look-alikes. Our research fills this gap by comparing and evaluating six traditional techniques: simple (naive Bayes (NB), K-nearest neighbor (KNN), decision trees (DT)) and advanced (random forest (RF), support vector machine (SVM), artificial neural network (ANN)) applied to different combinations of satellite-retrieved attributes. 36 ML algorithms were used to discriminate “ocean-slick signatures” (spills versus look-alikes) with ten-times repeated random subsampling cross validation (70-30 train-test partition). Our results found that the best algorithm (ANN: 90%) was >20% more effective than the least accurate one (DT: ~68%). Our empirical ML observations contribute to both scientific ocean remote-sensing research and to oil and gas industry activities, in that: (i) most techniques were superior when morphological information and Meteorological and Oceanographic (MetOc) parameters were included together, and less accurate when these variables were used separately; (ii) the algorithms with the better performance used more variables (without feature selection), while lower accuracy algorithms were those that used fewer variables (with feature selection); (iii) we created algorithms more effective than those of benchmark-past studies that used linear discriminant analysis (LDA: ~85%) on the same dataset; and (iv) accurate algorithms can assist in finding new offshore fossil fuel discoveries (i.e., misclassification reduction).

We compared the results of an Optimal Estimation (OE) based approach for the retrieval of the skin sea surface temperature (SSTskin) with those of the traditional non-linear sea surface temperature (NLSST) algorithm. The retrievals were from radiance measurements in two infrared channels of the Moderate Resolution Imaging Spectroradiometer (MODIS) on the NASA satellite Aqua. The OE used a reduced state vector of SST and total column water vapor (TCWV). The SST and atmospheric profiles of temperature and humidity from ERA5 provided prior knowledge, and we made reasonable assumptions about the variance of these fields. An atmospheric radiative transfer model was used as the forward model to simulate the MODIS measurements. The performances of the retrieval approaches were assessed by comparison with in situ measurements. We found that the OESST reduces the satellite–in situ bias, but mostly for retrievals with an already small bias between in situ and the prior SST. The OE approach generally fails to improve the SST retrieval when that difference is large. In such cases, the NLSST often provides a better estimate of the SST than the OE. The OESST also underperforms NLSST in areas that include large horizontal SST gradients.

Linear discriminant analysis (LDA) is a mathematically robust multivariate data analysis approach that is sometimes used for surface oil slick signature classification. Our goal is to rank the effectiveness of LDAs to differentiate oil spills from look-alike slicks. We explored multiple combinations of (i) variables (size information, Meteorological-Oceanographic (metoc), geo-location parameters) and (ii) data transformations (non-transformed, cube root, log10). Active and passive satellite-based measurements of RADARSAT, QuikSCAT, AVHRR, SeaWiFS, and MODIS were used. Results from two experiments are reported and discussed: (i) an investigation of 60 combinations of several attributes subjected to the same data transformation and (ii) a survey of 54 other data combinations of three selected variables subjected to different data transformations. In Experiment 1, the best discrimination was reached using ten cube-transformed attributes: ~85% overall accuracy using six pieces of size information, three metoc variables, and one geo-location parameter. In Experiment 2, two combinations of three variables tied as the most effective: ~81% of overall accuracy using area (log transformed), length-to-width ratio (log- or cube-transformed), and number of feature parts (non-transformed). After verifying the classification accuracy of 114 algorithms by comparing with expert interpretations, we concluded that applying different data transformations and accounting for metoc and geo-location attributes optimizes the accuracies of binary classifiers (oil spill vs. look-alike slicks) using the simple LDA technique.

Sea surface temperature (SST) is a fundamental physical variable for understanding, quantifying and predicting complex interactions between the ocean and the atmosphere. Such processes determine how heat from the sun is redistributed across the global oceans, directly impacting large- and small-scale weather and climate patterns. The provision of daily maps of global SST for operational systems, climate modeling and the broader scientific community is now a mature and sustained service coordinated by the Group for High Resolution Sea Surface Temperature (GHRSST) and the CEOS SST Virtual Constellation (CEOS SST-VC). Data streams are shared, indexed, processed, quality controlled, analyzed, and documented within a Regional/Global Task Sharing (R/GTS) framework, which is implemented internationally in a distributed manner. Products rely on a combination of low-Earth orbit infrared and microwave satellite imagery, geostationary orbit infrared satellite imagery, and in situ data from moored and drifting buoys, Argo floats, and a suite of independent, fully characterized and traceable in situ measurements for product validation (Fiducial Reference Measurements, FRM). Research and development continues to tackle problems such as instrument calibration, algorithm development, diurnal variability, derivation of high-quality skin and depth temperatures, and areas of specific interest such as the high latitudes and coastal areas. In this white paper, we review progress versus the challenges we set out 10 years ago in a previous paper, highlight remaining and new research and development challenges for the next 10 years (such as the need for sustained continuity of passive microwave SST using a 6.9 GHz channel), and conclude with needs to achieve an integrated global high-resolution SST observing system, with focus on satellite observations exploited in conjunction with in situ SSTs. The paper directly relates to the theme of Data Information Systems and also contributes to Ocean Observing Governance and Ocean Technology and Networks within the OceanObs2019 objectives. Applications of SST contribute to all the seven societal benefits, covering Discovery; Ecosystem Health & Biodiversity; Climate Variability & Change; Water, Food, & Energy Security; Pollution & Human Health; Hazards and Maritime Safety; and the Blue Economy.

Turbulent and radiative exchanges of heat between the ocean and atmosphere (hereafter heat fluxes), ocean surface wind stress, and state variables used to estimate them, are Essential Ocean Variables (EOVs) and Essential Climate Variables (ECVs) influencing weather and climate. This paper describes an observational strategy for producing 3-hourly, 25-km (and an aspirational goal of hourly at 10-km) heat flux and wind stress fields over the global, ice-free ocean with breakthrough 1-day random uncertainty of 15 W m–2 and a bias of less than 5 W m–2. At present this accuracy target is met only for OceanSITES reference station moorings and research vessels (RVs) that follow best practices. To meet these targets globally, in the next decade, satellite-based observations must be optimized for boundary layer measurements of air temperature, humidity, sea surface temperature, and ocean wind stress. In order to tune and validate these satellite measurements, a complementary global in situ flux array, built around an expanded OceanSITES network of time series reference station moorings, is also needed. The array would include 500–1000 measurement platforms, including autonomous surface vehicles, moored and drifting buoys, RVs, the existing OceanSITES network of 22 flux sites, and new OceanSITES expanded in 19 key regions. This array would be globally distributed, with 1–3 measurement platforms in each nominal 10° by 10° box. These improved moisture and temperature profiles and surface data, if assimilated into Numerical Weather Prediction (NWP) models, would lead to better representation of cloud formation processes, improving state variables and surface radiative and turbulent fluxes from these models. The in situ flux array provides globally distributed measurements and metrics for satellite algorithm development, product validation, and for improving satellite-based, NWP and blended flux products. In addition, some of these flux platforms will also measure direct turbulent fluxes, which can be used to improve algorithms for computation of air-sea exchange of heat and momentum in flux products and models. With these improved air-sea fluxes, the ocean’s influence on the atmosphere will be better quantified and lead to improved long-term weather forecasts, seasonal-interannual-decadal climate predictions, and regional climate projections.

Retrievals of skin Sea-Surface Temperature (SSTskin) from the measurements of the Visible Infrared Imaging Radiometer Suite on the Suomi-National Polar-orbiting Partnership satellite are presented and discussed. The algorithms used to derive the SSTskin from the radiometric measurements are given in detail. A number of approaches to assess the accuracy and stability of the Visible Infrared Imaging Radiometer Suite (VIIRS) SSTskin retrievals are reported, and factors including latitude and season, and physical processes in the atmosphere and at the surface are discussed. We conclude that the Suomi National Polar-orbiting Partnership (S-NPP) VIIRS is capable of matching and improving upon the accuracies of SSTskin from the MODISs on Terra and Aqua, and that the VIIRS SSTskin fields have the potential to contribute to the extension of the satellite-derived Climate Data Records of SST into the future.

The Sentinel-3 series satellites belong to the European Earth Observation satellite missions for supporting oceanography, land, and atmospheric studies. The Sea and Land Surface Temperature Radiometer (SLSTR) onboard the Sentinel-3 satellites was designed to provide a significant improvement in remote sensing of skin sea surface temperature (SSTskin). The successful application of SLSTR-derived SSTskin fields depends on their accuracies. Based on sensor-dependent radiative transfer model simulations, geostationary Geostationary Operational Environmental Satellite (GOES-16) Advanced Baseline Imagers (ABI) and Meteosat Second Generation (MSG-4) Spinning Enhanced Visible and Infrared Imager (SEVIRI) brightness temperatures (BT) have been transformed to SLSTR equivalents to permit comparisons at the pixel level in three ocean regions. The results show the averaged BT differences are on the order of 0.1 K and the existence of small biases between them are likely due to the uncertainties in cloud masking, satellite view angle, solar azimuth angle, and reflected solar light. This study demonstrates the feasibility of combining SSTskin retrievals from SLSTR with those of ABI and SEVIRI.

Sea surface temperature is very important in weather and ocean forecasting, and studying the ocean, atmosphere and climate system. Measuring the sea surface skin temperature (SSTskin) with infrared radiometers onboard earth observation satellites and shipboard instruments is a mature subject spanning several decades. Reanalysis model output SSTskin, such as from the newly released ERA5, is very widely used and has been applied for monitoring climate change, weather prediction research, and other commercial applications. The ERA5 output SSTskin data must be rigorously evaluated to meet the stringent accuracy requirements for climate research. This study aims to estimate the accuracy of the ERA5 SSTskin fields and provide an associated error estimate by using measurements from accurate shipboard infrared radiometers: the Marine-Atmosphere Emitted Radiance Interferometers (M-AERIs). Overall, the ERA5 SSTskin has high correlation with ship-based radiometric measurements, with an average difference of~0.2 K with a Pearson correlation coefficient (R) of 0.993. Parts of the discrepancies are related to dust aerosols and variability in air-sea temperature differences. The downward radiative flux due to dust aerosols leads to significant SSTskin differences for ERA5. The SSTskin differences are greater with the large, positive air–sea temperature differences. This study provides suggestions for the applicability of ERA5 SSTskin fields in a selection of research applications.

Recent results using wind and sea surface temperature data from satellites and high-resolution coupled models suggest that mesoscale ocean–atmosphere interactions affect the locations and evolution of storms and seasonal precipitation over continental regions such as the western US and Europe. The processes responsible for this coupling are difficult to verify due to the paucity of accurate air–sea turbulent heat and moisture flux data. These fluxes are currently derived by combining satellite measurements that are not coincident and have differing and relatively low spatial resolutions, introducing sampling errors that are largest in regions with high spatial and temporal variability. Observational errors related to sensor design also contribute to increased uncertainty. Leveraging recent advances in sensor technology, we here describe a satellite mission concept, FluxSat, that aims to simultaneously measure all variables necessary for accurate estimation of ocean–atmosphere turbulent heat and moisture fluxes and capture the effect of oceanic mesoscale forcing. Sensor design is expected to reduce observational errors of the latent and sensible heat fluxes by almost 50%. FluxSat will improve the accuracy of the fluxes at spatial scales critical to understanding the coupled ocean–atmosphere boundary layer system, providing measurements needed to improve weather forecasts and climate model simulations.

We classify low-backscatter regions observed in Synthetic Aperture Radar (SAR) measurements of the surface of the ocean as either oil slicks or look-alike slicks (radar false targets). Our proposed classification algorithm is based on Linear Discriminant Analyses (LDAs) of RADARSAT-1 measurements (402 scenes off the southeast coast of Brazil from July 2001 to June 2003) and Meteorological-Oceanographic (MetOc) data from other earth observation sensors: Advanced Very High Resolution Radiometer (AVHRR), Sea-Viewing Wide Field-of-View Sensor (SeaWiFS), Moderate Resolution Imaging Spectroradiometer (MODIS), and Quick Scatterometer (QuikSCAT). Oil slicks are sea-surface expressions of exploration and production oil, ship- and orphan-spills. False targets are associated with environmental phenomena, such as biogenic films, algal blooms, upwelling, low wind, or rain cells. Both categories have been interpreted by domain-experts: mineral oil (n = 350; 45.5%) and petroleum free (n = 419; 54.5%). We explore nine size variables (area, perimeter, etc.) and three types of MetOc information (sea surface temperature, chlorophyll-a, and wind speed) that describe the 769 samples analyzed. Seven attribute–domain combinations are tested with three non-linear transformations (none, cube root, log10), with and without MetOc, adding to 39 attribute subdivisions. Classification accuracies are independent of data transformation and improve when selected size attributes are combined with MetOc, leading to overall accuracies of ~80% and sound levels of sensitivity (~90%), specificity (~80%), positive (~80%) and negative (~90%) predictive values. The effectiveness of this data-driven attempt supports further commercial or academic implementation of our LDA algorithm.

A novel empirical approach to categorize oil slicks’ sea surface expressions in synthetic aperture radar (SAR) measurements into oil seeps or oil spills is investigated, contributing both to academic remote sensing research and to practical applications for the petroleum industry. We use linear discriminant analysis (LDA) to try accuracy improvements from our previously published methods of discriminating seeps from spills that achieved ~70% of overall accuracy. Analyzing 244 RADARSAT-2 scenes containing 4562 slicks observed in Campeche Bay (Gulf of Mexico), our exploratory data analysis evaluates the impact of 61 combinations of SAR backscatter coefficients (σ°, β°, γ°), SAR calibrated products (received radar beam given in amplitude or decibel, with or without a despeckle filter), and data transformations (none, cube root, log10). The LDA ability to discriminate the oil-slick category is rather independent of backscatter coefficients and calibrated products, but influenced by data transformations. The combination of attributes plays a role in the discrimination; combining oil-slicks’ size and SAR information is more effective. We have simplified our analyses using fewer attributes to reach accuracies comparable to those of our earlier studies, and we suggest using other multivariate data analyses—cubist or random forest—to attempt to further improve oil-slick category discrimination.

Our research focuses on refining the ability to discriminate two petrogenic oil-slick categories: the sea surface expression of naturally-occurring oil seeps and man-made oil spills. For that, a long-term RADARSAT-2 dataset (244 scenes imaged between 2008 and 2012) is analyzed to investigate oil slicks (4562) observed in the Gulf of Mexico (Campeche Bay, Mexico). As the scientific literature on the use of satellite-derived measurements to discriminate the oil-slick category is sparse, our research addresses this gap by extending our previous investigations aimed at discriminating seeps from spills. To reveal hidden traits of the available satellite information and to evaluate an existing Oil-Slick Discrimination Algorithm, distinct processing segments methodically inspect the data at several levels: input data repository, data transformation, attribute selection, and multivariate data analysis. Different attribute selection strategies similarly excel at the seep-spill differentiation. The combination of different Oil-Slick Information Descriptors presents comparable discrimination accuracies. Among 8 non-linear transformations, the Logarithm and Cube Root normalizations disclose the most effective discrimination power of almost 70%. Our refined analysis corroborates and consolidates our earlier findings, providing a firmer basis and useful accuracies of the seep-spill discrimination practice using information acquired with space-borne surveillance systems based on Synthetic Aperture Radars.

Over several decades, improving the accuracy of Sea-Surface Temperatures (SSTs) derived from satellites has been a subject of intense research, and continues to be so. Knowledge of the accuracy of the SSTs is critical for weather and climate predictions, and many research and operational applications. In 2015, the operational Japanese MTSAT-2 geostationary satellite was replaced by the Himawari-8, which has a visible and infrared imager with higher spatial and temporal resolutions than its predecessor. In this study, data from both satellites during a three-month overlap period were compared with subsurface in situ temperature measurements from the Tropical Atmosphere Ocean (TAO) array and self-recording thermometers at the depths of corals of the Great Barrier Reef. Results show that in general the Himawari-8 provides more accurate SST measurements compared to those from MTSAT-2. At various locations, where in situ measurements were taken, the mean Himawari-8 SST error shows an improvement of ~0.15 K. Sources of the differences between the satellite-derived SST and the in situ temperatures were related to wind speed and diurnal heating.

An Exploratory Data Analysis (EDA) aims to use Synthetic Aperture Radar (SAR) measurements for discriminating between two oil slick types observed on the sea surface: naturally-occurring oil seeps versus human-related oil spills—the use of satellite sensors for this task is poorly documented in scientific literature. A long-term RADARSAT dataset (2008–2012) is exploited to investigate oil slicks in Campeche Bay (Gulf of Mexico). Simple Classification Algorithms to distinguish the oil slick type are designed based on standard multivariate data analysis techniques. Various attributes of geometry, shape, and dimension that describe the oil slick Size Information are combined with SAR-derived backscatter coefficients—sigma-(σo), beta-(βo), and gamma-(γo) naught. The combination of several of these characteristics is capable of distinguishing the oil slick type with ~70% of overall accuracy, however, the sole and simple use of two specific oil slick’s Size Information (i.e., area and perimeter) is equally capable of distinguishing seeps from spills. The data mining exercise of our EDA promotes a novel idea bridging petroleum pollution and remote sensing research, thus paving the way to further investigate the satellite synoptic view to express geophysical differences between seeped and spilled oil observed on the sea surface for systematic use.

Sea surface temperature (SST) measurements are required by operational ocean and atmospheric forecasting systems to constrain modeled upper ocean circulation and thermal structure. The Global Ocean Data Assimilation Experiment (GODAE) High Resolution SST Pilot Project (GHRSST-PP) was initiated to address these needs by coordinating the provision of accurate, high-resolution, SST products for the global domain. The pilot project is now complete, but activities continue within the Group for High Resolution SST (GHRSST). The pilot project focused on harmonizing diverse satellite and in situ data streams that were indexed, processed, quality controlled, analyzed, and documented within a Regional/Global Task Sharing (R/GTS) framework implemented in an internationally distributed manner. Data with meaningful error estimates developed within GHRSST are provided by services within R/GTS. Currently, several terabytes of data are processed at international centers daily, creating more than 25 gigabytes of product. Ensemble SST analyses together with anomaly SST outputs are generated each day, providing confidence in SST analyses via diagnostic outputs. Diagnostic data sets are generated and Web interfaces are provided to monitor the quality of observation and analysis products. GHRSST research and development projects continue to tackle problems of instrument calibration, algorithm development, diurnal variability, skin temperature deviation, and validation/verification of GHRSST products. GHRSST also works closely with applications and users, providing a forum for discussion and feedback between SST users and producers on a regular basis. All data within the GHRSST R/GTS framework are freely available. This paper reviews the progress of GHRSST-PP, highlighting achievements that have been fundamental to the success of the pilot project.

Sea surface temperature (SST) measurements are vital to global weather prediction, climate change studies, fisheries management, and a wide range of other applications. Measurements are taken by several satellites carrying infrared and microwave radiometers, moored buoys, drifting buoys, and ships. Collecting all these measurements together and producing global maps of SST has been a difficult endeavor due in part to different data formats, data location and accessibility, and lack of measurement error estimates. The need for a uniform approach to SST measurements and estimation of measurement errors resulted in the formation of the international Global Ocean Data Assimilation Experiment (GODAE) High Resolution SST Pilot Project (GHRSST-PP). Projects were developed in Japan, Europe, and Australia. Simultaneously, in the United States, the Multi-sensor Improved SST (MISST) project was initiated. Five years later, the MISST project has produced satellite SST data from nine satellites in an identical format with ancillary information and estimates of measurement error. Use of these data in global SST analyses has been improved through research into modeling of the ocean surface skin layer and upper ocean diurnal heating. These data and research results have been used by several groups within MISST to produce high-resolution global maps of SSTs, which have been shown to improve tropical cyclone prediction. Additionally, the new SSTs are now used operationally for marine weather warnings and forecasts.