Search

Spears, daggers, and axes with obsidian tips and blades made by inhabitants of the Admiralty Islands (Manus Province, Papua New Guinea) were intensively collected by Europeans during the later 19th and early 20th centuries and are widely represented in museum collections. Prior studies have shown how islanders creatively responded to increasing European demand by changing style and manufacturing strategies. What is less well understood is how the colonial encounter, particularly during its early stages, opened new opportunities for producers to work outside traditional patterns of ownership. Obsidian source assignments for a large sample of implements dated c. 1850–1990 show that as museum collecting intensified, the number of sources utilized expanded from a single source to multiple obsidian flows, indicating that customary production monopolies had broken down in response to opportunities for commercial trade. This case study demonstrates the valuable role that chemical characterization can play in studies of cross-cultural encounter and engagement. [ABSTRACT FROM AUTHOR]

Military actions bring many negative consequences both in the short and long term. In particular, not only people suffer during armed aggression, but also the ecosystem and agrocenoses. This article examined the impact of bombardment of agricultural land with aerial bombs and established whether it was really contaminated with heavy metals. Samples were collected in two regions of Ukraine - Sumy and Chernihiv - from craters formed by bombing. The soil was taken directly from the bottom of the crater, at three points on its slope and 20 meters from the crater, in a conditionally undamaged area. The soil was analyzed in the laboratory using X-ray fluorescence analysis. The study analyzed the content of barium, zirconium, rubidium, zinc, and vanadium soil samples from a crater. The impact of aerial bombings on the concentration of heavy metals in the soils of the farms under investigation is unclear, it may be inferred. The concentration of barium, zirconium, and manganese on the crater slopes is higher in certain farms than in others, but overall trends do not show an obvious increase in these elements when compared to the control sites. However, several farms did not report significant shifts in the heavy metal composition, indicating how challenging it is to monitor whether explosions affect the concentrations of these elements. With a few exceptions, other heavy elements including strontium, rubidium, and zinc did not consistently exhibit excesses in the craters. Therefore, further, more thorough assessment of soil contamination should be carried out and methods for remediation should be developed. [ABSTRACT FROM AUTHOR]

Artisanal gold mining can lead to soil contamination with potentially toxic elements (PTEs), necessitating soil quality monitoring due to environmental and human health risks. However, determining PTE levels through acid digestion is time-consuming, generates chemical waste, and requires significant resources. As an alternative, portable X-ray fluorescence (pXRF) offers a faster, more cost-effective, and sustainable analysis. This study compared total As, Ba, Cr, Cu, Fe, Mn, Ni, Pb, Sr, Ti, V, and Zn obtained from pXRF with their pseudo-total contents obtained through acid digestion (USEPA method 3051A) in areas influenced by artisanal gold mining in the Eastern Amazon, Brazil. pXRF data and machine learning algorithms were used to predict extractable Cu, Fe, Mn, and Zn. Linear regression models were fitted to compare the two methods, and random forest and support vector machine techniques were used to predict extractable contents. The best regression model fits for the pseudo-total PTE contents were those for Cu, Fe, Mn and Pb in agricultural areas (R2 > 0.80); Fe and Mn in gold mining residue (R2 > 0.70); and Ba, Cu and Mn in urban areas (R2 > 0.80). The best models for predicting the extractable PTE contents were those for Cu (R2 = 0.72; RMSE = 2.58 mg dm−3) and Zn (R2 = 0.71; RMSE = 1.44 mg dm−3) in agricultural areas and for Zn (R2 = 0.72; RMSE = 0.43 mg dm−3) in gold mining residue. The results demonstrated that pXRF can characterize and predict PTE contents in mining-impacted areas, offering a sustainable approach to soil quality analysis. [ABSTRACT FROM AUTHOR]

Drilled cores provide first‐hand data for deposit research. The element compositions at different depths of cores are an important basis for evaluating the reserves of mineral deposits. Therefore, a dataset containing a complete drill core element content has great value on practicality. In this study, a pXRF analyser was used to measure the element contents in eight cores of the Xuancheng Qiaomaishan copper–sulphur deposit ZK16 + 02, ZK16 + 03, ZK16 + 04, ZK1804, ZK18 + 02, ZK1403, ZK1602, and ZK1604, and a geochemical dataset was obtained. The dataset includes Cu, S, Fe, W, Mg, Al, Si, As, Mn, Co, Ni, Zn, Se, Ti, V, Cr, Ca, Cl, P, Sr, Y, Zr, Nb, Mo, Pb, Th, U, and other 27 major and trace elements. Based on this dataset, the vertical variation pattern of main and trace element content in drill cores can be examined, the distributions of elements in full hole or exploration line profile can be drawn, and element correlation analysis and principal component analysis can be performed. [ABSTRACT FROM AUTHOR]

Abstract Drilled cores provide first‐hand data for deposit research. The element compositions at different depths of cores are an important basis for evaluating the reserves of mineral deposits. Therefore, a dataset containing a complete drill core element content has great value on practicality. In this study, a pXRF analyser was used to measure the element contents in eight cores of the Xuancheng Qiaomaishan copper–sulphur deposit ZK16 + 02, ZK16 + 03, ZK16 + 04, ZK1804, ZK18 + 02, ZK1403, ZK1602, and ZK1604, and a geochemical dataset was obtained. The dataset includes Cu, S, Fe, W, Mg, Al, Si, As, Mn, Co, Ni, Zn, Se, Ti, V, Cr, Ca, Cl, P, Sr, Y, Zr, Nb, Mo, Pb, Th, U, and other 27 major and trace elements. Based on this dataset, the vertical variation pattern of main and trace element content in drill cores can be examined, the distributions of elements in full hole or exploration line profile can be drawn, and element correlation analysis and principal component analysis can be performed.

Blueberries offer multiple health benefits, and their cultivation has expanded to warm tropical regions. However, references for foliar nutritional content are lacking in the literature. Proximal sensing may enhance nutritional characterization to optimize blueberry production. We aimed (i) to characterize the nutrient contents of healthy plants of three blueberry varieties adapted to warm climates (Emerald, Jewel, and Biloxi) using a reference method for foliar analysis (inductively coupled plasma (ICP)) and a portable X-ray fluorescence (pXRF) spectrometer on fresh and dry leaves and (ii) to differentiate blueberry varieties based on their nutrient composition. Nutrient content was statistically compared per leaf moisture condition (fresh or dry) with ICP results and used to differentiate the varieties via the random forest algorithm. P and Zn contents (ICP) in leaves were different among varieties. Dry leaf results (pXRF) were strongly correlated with ICP results. Most nutrients determined using ICP presented good correlation with pXRF data (R2 from 0.66 to 0.93). The three varieties were accurately differentiated by pXRF results (accuracy: 87%; kappa: 0.80). Predictions of nutrient contents based on dry leaves analyzed by pXRF outperformed those based on fresh leaves. This approach can also be applied to other crops to facilitate nutrient assessment in leaves.

Nine glazed porcelain artifacts bearing the coat of arms of France, from King Louis XV tableware orders, were analysed at the laboratory or in their conservation secure room. Based on the experience acquired in the study of 18th century European and Chinese porcelain using mobile XRF (pXRF) and Raman microspectroscopy, a comparison of the impurities in the paste (Y, Rb, and Sr), the elements associated with cobalt in the blue overglaze (Bi, Mn, Zn, and As) and those present in the tin yellow and Naples yellow pigments (Sn, Sb, and Zn) highlights the use of different raw materials for some of these objects. Differences regarding the Ag content in the gold decorations also provide information. Raman identification of the different types of yellow pigment confirms the categorization. The results obtained on the Louis XV tableware are compared to those of “Chine de commande”, attributed to the same places and periods of production or recognized copies. The clustering of the quantitative comparison pXRF signals of the abovementioned elements and a consideration of the Raman parameters of the yellow pigments appear to be effective tools for object categorization to confirm or refute questions about the authenticity of objects.

In this paper, sedimentological and geochemical data from six cores are presented and discussed in order to better understand the Holocene palaeoenvironmental evolution of the coastal plains of the Pecora and Cornia Rivers (southern Tuscany, Italy). Overall, the stratigraphies show a general upward trend in the evolution of the sedimentary succession of lagoonal environments (low Zr/Rb, high EC values) connected or partially connected to the sea (low EC values), to a seaward progradation of marshy-swampy environments (Mn/Ti, high TOC values) and finally to continental environments with the progradation of distal alluvial plains (high Zr/Rb, low EC values) influenced by runoff phenomena or local water stagnation. This trend is closely related to the increasing input of sediments from inland due to soil erosion processes and, especially in the last two centuries, land reclamation works. In the Cornia coastal plain, the chronologies indicate that lagoonal environments were already present before ca. 8.2ka BC and started receding seaward at around 3.7ka BC. On the other hand, chronologies from ca. 0.5ka BC to ca. 0.6ka AD point to a persistence of lagoonal environments only in areas very close to those already identified as such in historical cartography. In the Pecora coastal plain, the chronologies show that the lagoon environments had already disappeared before ca. 3.3ka BC, whilst the peripheral environments were characterised by abundant vegetation. The latter gradually degraded in favour of the development of shallow to very deep, unvegetated marshlands, which persisted until ca. 1ka AD. [ABSTRACT FROM AUTHOR]

Nine glazed porcelain artifacts bearing the coat of arms of France, from King Louis XV tableware orders, were analysed at the laboratory or in their conservation secure room. Based on the experience acquired in the study of 18th century European and Chinese porcelain using mobile XRF (pXRF) and Raman microspectroscopy, a comparison of the impurities in the paste (Y, Rb, and Sr), the elements associated with cobalt in the blue overglaze (Bi, Mn, Zn, and As) and those present in the tin yellow and Naples yellow pigments (Sn, Sb, and Zn) highlights the use of different raw materials for some of these objects. Differences regarding the Ag content in the gold decorations also provide information. Raman identification of the different types of yellow pigment confirms the categorization. The results obtained on the Louis XV tableware are compared to those of "Chine de commande", attributed to the same places and periods of production or recognized copies. The clustering of the quantitative comparison pXRF signals of the abovementioned elements and a consideration of the Raman parameters of the yellow pigments appear to be effective tools for object categorization to confirm or refute questions about the authenticity of objects. [ABSTRACT FROM AUTHOR]

Blueberries offer multiple health benefits, and their cultivation has expanded to warm tropical regions. However, references for foliar nutritional content are lacking in the literature. Proximal sensing may enhance nutritional characterization to optimize blueberry production. We aimed (i) to characterize the nutrient contents of healthy plants of three blueberry varieties adapted to warm climates (Emerald, Jewel, and Biloxi) using a reference method for foliar analysis (inductively coupled plasma (ICP)) and a portable X-ray fluorescence (pXRF) spectrometer on fresh and dry leaves and (ii) to differentiate blueberry varieties based on their nutrient composition. Nutrient content was statistically compared per leaf moisture condition (fresh or dry) with ICP results and used to differentiate the varieties via the random forest algorithm. P and Zn contents (ICP) in leaves were different among varieties. Dry leaf results (pXRF) were strongly correlated with ICP results. Most nutrients determined using ICP presented good correlation with pXRF data (R2 from 0.66 to 0.93). The three varieties were accurately differentiated by pXRF results (accuracy: 87%; kappa: 0.80). Predictions of nutrient contents based on dry leaves analyzed by pXRF outperformed those based on fresh leaves. This approach can also be applied to other crops to facilitate nutrient assessment in leaves. [ABSTRACT FROM AUTHOR]

The Iron Age was a period of change, with many innovations in the glass-making technology. The chemical composition of the set of objects considered in the present study demonstrates the diversity of the raw materials used and the depth of knowledge about the manipulation of glass appearance in the eighth-sixth centuries BCE. The study was carried out using fibre optics reflection spectroscopy and portable X-ray fluorescence spectrometry at the museums’ premises to examine a large number of glass beads and preliminarily group them on the basis of their composition and spectral characteristics. In addition, a smaller set of selected samples was analysed by laser ablation inductively coupled plasma mass spectrometry to provide a comprehensive chemical characterisation of the material. The compositional data indicated that the samples belonged to the high magnesium and low magnesium glass compositional types. Only one sample was recognised as low magnesium medium potassium glass. Glasses within each group were made from different sands, suggesting different provenances. Some of the samples were suggested to be of local origin, while the others were interpreted as imported glass. Evidence of glass colouring, decolouring and recycling are also discussed. [ABSTRACT FROM AUTHOR]

Chinese porcelain with an optically clear colored glaze, imported to Europe from the Kangxi period (1662–1722, Qing Dynasty) onwards was highly collected by the French Elite of the 18th century. The bright colors with a clear, shiny glaze were unlike anything produced in Europe at that time. The colors of enamelled artifacts (on biscuits or already glazed porcelain) can be fully monochrome or consist of associations of large monochromatic areas with or without application of gilding. Non-invasive portable XRF and mobile Raman analyses have previously shown their effectiveness in the characterization of (colored) glassy silicates. In this study, we compare the Raman signatures of twenty-one Chinese artifacts fully—or with major monochrome area (sancai)—decorated with blue, turquoise (or celectian blue), honey-yellow, green, eggplant, and red color. Different types of glazes are identified and confirmed by pXRF: lead-rich, lead-poor-alkali, lead-doped alkali, and alkali-based compositions. However, an unexpected low level of lead is observed in the turquoise glazes, likely to optimize the gloss. Raman spectroscopy appears more reliable to compare the Pb content than pXRF. This work presents Raman spectral signatures of glazes that can potentially be used for non-invasive object classification and counterfeit detection. [ABSTRACT FROM AUTHOR]

Written sources indicate that Alexandria in Egypt was a leading producer of Roman glass. Furthermore, archaeological finds have provided evidence for the local production of drawn glass and gold‐in‐glass beads, which were distributed throughout the world. In this study, we present an analysis of the chemical composition of more than two hundred glass objects from the Roman (2nd–3rd/4th century ce) and Late Antique (4th/5th–7th century ce) glass bead workshops located at Kom el‐Dikka in Alexandria. This study is based on the results of portable X‐ray fluorescence (pXRF) analyses carried out on raw glass, bead semi‐products, products and waste from both periods. Additionally, the glass chemistry of some Islamic (8th–12th century ce) beads found at the site has been analysed.Despite the limitations of the method, the vast majority of samples exhibited compositions confirming their general dating and Egyptian origin. Remarkably, a single bead was made of high‐alumina glass and appeared to be an import from India, possibly a remnant of the Indo‐Pacific glass bead route that connected Red Sea ports and Europe in Late Antiquity. In addition, we offer a new analytical approach to the method that has potential to enhance the value of pXRF in the analysis of archaeological glass. [ABSTRACT FROM AUTHOR]

Copyright of Arkeoloji Dergisi is the property of Ege University and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

X-ray fluorescence is a fast, cost-effective, and eco-friendly method for elemental analyses. Portable X-ray fluorescence spectrometers (pXRF) have proven instrumental in detecting metals across diverse matrices, including plants. However, sample preparation and measurement procedures need to be standardized for each instrument. This study examined sample preparation methods and predictive capabilities for nickel (Ni) concentrations in various plants using pXRF, employing empirical calibration based on inductively coupled plasma optical emission spectroscopy (ICP-OES) Ni data. The evaluation involved 300 plant samples of 14 species with variable of Ni accumulation. Various dwell times (30, 60, 90, 120, 300 s) and sample masses (0.5, 1.0, 1.5, 2.0 g) were tested. Calibration models were developed through empirical and correction factor approaches. The results showed that the use of 1.0 g of sample (0.14 g cm−2) and a dwell time of 60 s for the study conditions were appropriate for detection by pXRF. Ni concentrations determined by ICP-OES were highly correlated (R2 = 0.94) with those measured by the pXRF instrument. Therefore, pXRF can provide reliable detection of Ni in plant samples, avoiding the digestion of samples and reducing the decision-making time in environmental management. [ABSTRACT FROM AUTHOR]

The Hispanic Society Museum & Library (HSML) holds a collection of nine viceregal barniz de Pasto objects, made by Indigenous artisans in the 17th and 18th centuries. Designed to imitate Asian lacquers and intended for European aesthetic tastes, barniz de Pasto is an example of Indigenous technique and knowledge that has survived to the present day. An in-depth analysis of five of these barniz de Pasto objects, dated to the first half and last quarter of the 17th century based on their iconography, was carried out through a combination of non-invasive and micro-invasive techniques, including portable X-ray fluorescence (pXRF) spectroscopy to investigate the possible presence of inorganic pigments, and fiber-optics reflectance spectroscopy (FORS) and reflectance imaging spectroscopy (RIS) to provide molecular information on colorants and their distributions across the objects. Dyes and pigments were also identified using Raman spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, and liquid chromatography/mass spectrometry (LC/MS). The nature of the resin was determined by FTIR and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS), while the decoration stratigraphy and composition were analyzed by scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS). This paper confirms the use of mopa mopa, the resin used in the barniz de Pasto technique, in two objects not previously analyzed, and identifies indigo, insect-based red, calomel, lead white, and an unknown flavonol-based yellow dye, and challenges the use of calomel as a temporal marker for these works. Taken together, these results expand our understanding of the material use and explorations undertaken by artists during this time period to create such elaborate and enduring objects. [ABSTRACT FROM AUTHOR]

The investigation of ancient artifacts is often constrained by their scarce availability and high protection and custody protocols. Among these, coinage represents an especially valuable kind-of-samples given their uniqueness and the subjacent information that is hidden behind their composition. Their analysis are often carried out using non-destructive techniques in order to avoid any alteration of the samples. In the field of Cultural Heritage analysis, smartphone-based methodologies have experienced a significant increase during the last few years, given their wide availability and ability to yield fast results. However, their analytical application demands a thorough and careful tuning during the methodology optimization. In this work, 21 historical gold and golden coins spanning a historical period of more than 2000 years have been analytically investigated. To that end, a two-fold approach has been implemented: first, the elemental composition has been analysed using portable X-ray fluorescence; and second, an innovative smartphone-based imaging method has been applied to measure their colour. Results allowed to describe the coins from their elemental profile, identifying some potentially debased ones, as well as some others not containing any gold. When possible, the results have been compared to previously reported cases, but our samples include some previously unreported cases representing new insights. All in all, this article provides new analytical data on unanalysed unique historical samples, in terms of their elemental profile and colorimetric properties, making use of an innovative, non-invasive nor destructive, fast and affordable colorimetric smartphone-based method to characterise historical coins.

La oportunidad de estudiar dos placas decoradas de piedra halladas en contextos megalíticos de la región de Viseu/Tondela, una decorada y conocida desde 1912, la otra inédita hasta ahora, ha supuesto un valor añadido al conocimiento de esta categoría de artefactos ‘ideotécnicos’. Caracterizadas a nivel morfotipológico, han sido objeto de análisis de fluorescencia de rayos X que apuntan a la posibilidad de la utilización de cinabrio como pigmento decorativo en una de ellas. También se han utilizado en este estudio imágenes fotográficas de diferentes bandas espectrales, tanto en la banda de luz visible como en las bandas de radiación IR y UV, que han permitido corroborar el uso de pigmento rojo en algunas zonas, así como el de otro pigmento colorante negro o azul en otras. Además, se ha observado la relación marginal, aunque no aislada, de los hallazgos de estas placas con el sur peninsular, donde piezas del mismo universo conceptual –los ‘ídolos-placa’– se cuentan por miles. Estas dos placas, junto con algunas otras elaboradas con diferente tipología, materia prima y contexto –inéditas o en proceso de valoración–, recuperadas en el interfluvio Duero-Tajo, demuestran que el vacuum de este tipo de registros en la región es solo aparente.

This paper presents the preliminary results of an investigation on the unexplored topic of polychromy on provincial stone sculptures from the Roman provinces in Germania through the innovative application of heritage materials science techniques. A group of three life-sized statues dating to the 1st Century CE recovered from Ingelheim, near Mainz, retains remarkably well-preserved traces of pigments. These are ripe for emerging non-invasive technologies supplemented by micro-sampling to validate results and provide information relating to mixing and layering not available to the naked eye. The most strikingly visible areas of extant polychromy were retained on the sculpture of a young woman, reported on here as the first phase of this programme of research. The results suggest that the statue was originally covered in a gypsum layer before the application of complex and diverse recipes of pigment applied as mixtures and in layers to create required hues and shadowing on sculpted features. The palette includes ochres and green earth mixed with small amounts of minium (red lead), realgar and lapis lazuli (ultramarine blue) added to create skin tones, and a vibrant blue-green tunic created from Egyptian blue, bone black, ochres, cinnabar and green earth; the palla and peplos contained ochres, bone black, and orpiment, and mixes of these created the detail of coloured jewellery. Of great interest was the detection of bone black on many features, particularly as a shading agent to enhance sculpted features, such as folds in cloth, providing a more realistic and flowing articulation. This is a revolutionary observation that provides previously unexplored insights into artistic polychromic practice in Antiquity.

Mycenaean vitreous artifacts, such as beads and relief plaques, are highly susceptible to degradation, which can significantly alter their visual characteristics and pose challenges to their taxonomy. The visual manifestation of corrosion on vitreous artifacts, especially glass and faience, has often led to their misclassification, which, in turn, has a significant impact on their interpretation by researchers, often resulting in misleading notions. The present paper constitutes part of an overall study, implemented within the framework of the project, Myc-MVP: Mycenaean Vitreous Production, A Novel Interdisciplinary Approach Towards Resolving Critical Taxonomy Issues, which has employed a combination of established, state-of-the-art scientific methods to analyze and identify the specific compositional changes occurring at different spatial dimensions within surface layers, with the overarching aim of contributing to our understanding of the degradation mechanisms of vitreous artifacts and the relevant implications for the archaeological record. Importantly, these findings will yield useful data in devising strategies for the proper classification, management, and preservation of vitreous artifacts in the future. The present study focuses on investigating the relationship between the compositional changes in a subset of 12 (of the overall 126 objects entailed in the project) corroded vitreous artifacts from Mycenaean contexts in the Aegean and the way these are manifested visually, with the application of X-ray fluorescence and LED microscopy. We aim to decipher the nature of corroded objects with the aid of focused analysis. This study delves into degradation processes in glass artifacts, highlighting preservation variations and environmental influences like burial. Coloration, attributed to copper and cobalt oxide, shows some correlation with preservation quality. These chromophore agents potentially induce thermal stresses and corrosion. The complex interplay between chemical composition, environmental conditions, and preservation status underscores the need for comprehensive research. Analyzing the full artifact set using complementary techniques promises deeper insights for secure material classification and cultural heritage preservation.

The craft box recovered from a 13th­century hillfort at Lõhavere, Estonia, contained a well-preserved selection of copper­alloy objects. The limited corrosion on these objects allowed a more accurate estimation of their compositions through non­destructive surface measurements. Using the resulting pXRF database, this study explored a possible correlation between the types of objects and their material composition. By comparing the most common contaminants with the alloying metals, a qualitative estimation of the material quality was conducted. The results showed that despite a considerable overlap between object types, the material composition dif fered based on the itemsâ appearance and function. A shift from brass to bronze and tinned objects coincided with a greater availability of tin at the hillfort, as well as a rise in silver smith ing. Moreover, objects with a silver appearance seemed to be more desirable in this period, apart from some high­status personal ornaments and traditional spiral tube decorations. The results possibly reflect different metalworking practices compared to earlier periods and contemporary sites. Some evidence of recycling is present among the spiral tubes, suggesting that they originated from different raw material sources, possibly removed from obsolete clothing. Alternatively, this could indicate a varying quality of imported copper­alloy, including wire, along the Hansa trade routes.

Mycenaean vitreous artifacts, such as beads and relief plaques, are highly susceptible to degradation, which can significantly alter their visual characteristics and pose challenges to their taxonomy. The visual manifestation of corrosion on vitreous artifacts, especially glass and faience, has often led to their misclassification, which, in turn, has a significant impact on their interpretation by researchers, often resulting in misleading notions. The present paper constitutes part of an overall study, implemented within the framework of the project, Myc-MVP: Mycenaean Vitreous Production, A Novel Interdisciplinary Approach Towards Resolving Critical Taxonomy Issues, which has employed a combination of established, state-of-the-art scientific methods to analyze and identify the specific compositional changes occurring at different spatial dimensions within surface layers, with the overarching aim of contributing to our understanding of the degradation mechanisms of vitreous artifacts and the relevant implications for the archaeological record. Importantly, these findings will yield useful data in devising strategies for the proper classification, management, and preservation of vitreous artifacts in the future. The present study focuses on investigating the relationship between the compositional changes in a subset of 12 (of the overall 126 objects entailed in the project) corroded vitreous artifacts from Mycenaean contexts in the Aegean and the way these are manifested visually, with the application of X-ray fluorescence and LED microscopy. We aim to decipher the nature of corroded objects with the aid of focused analysis. This study delves into degradation processes in glass artifacts, highlighting preservation variations and environmental influences like burial. Coloration, attributed to copper and cobalt oxide, shows some correlation with preservation quality. These chromophore agents potentially induce thermal stresses and corrosion. The complex interplay between chemical composition, environmental conditions, and preservation status underscores the need for comprehensive research. Analyzing the full artifact set using complementary techniques promises deeper insights for secure material classification and cultural heritage preservation. [ABSTRACT FROM AUTHOR]

This paper presents the preliminary results of an investigation on the unexplored topic of polychromy on provincial stone sculptures from the Roman provinces in Germania through the innovative application of heritage materials science techniques. A group of three life-sized statues dating to the 1st Century CE recovered from Ingelheim, near Mainz, retains remarkably well-preserved traces of pigments. These are ripe for emerging non-invasive technologies supplemented by micro-sampling to validate results and provide information relating to mixing and layering not available to the naked eye. The most strikingly visible areas of extant polychromy were retained on the sculpture of a young woman, reported on here as the first phase of this programme of research. The results suggest that the statue was originally covered in a gypsum layer before the application of complex and diverse recipes of pigment applied as mixtures and in layers to create required hues and shadowing on sculpted features. The palette includes ochres and green earth mixed with small amounts of minium (red lead), realgar and lapis lazuli (ultramarine blue) added to create skin tones, and a vibrant blue-green tunic created from Egyptian blue, bone black, ochres, cinnabar and green earth; the palla and peplos contained ochres, bone black, and orpiment, and mixes of these created the detail of coloured jewellery. Of great interest was the detection of bone black on many features, particularly as a shading agent to enhance sculpted features, such as folds in cloth, providing a more realistic and flowing articulation. This is a revolutionary observation that provides previously unexplored insights into artistic polychromic practice in Antiquity. [ABSTRACT FROM AUTHOR]

Ancient faecal material is becoming a highly valuable more frequently investigated proxy with which to address a wide range of research questions. With advancing scientific methodologies it is becoming easier to identify and to analyse. The aim of this paper is to use a set of archaeological and ethnographic case studies to illustrate and evaluate the range of methods that can be used in conjunction with each other to aid investigation of archaeological faecal material. This multi-scalar and multi-method approach uses portable x-ray fluorescence (pXRF), spot sampling and smear slide analysis, micromorphology, gas chromatography mass spectrometry (GC-MS), environmental scanning microscopy with energy dispersive x-ray spectroscopy (ESEM-EDX), and phytolith analysis. The case studies presented here focus on the Neolithic because of this unique opportunity to examine concentrations of animal dung from managed or early domesticated herds. This research illustrates a range of the methods that can be used in conjunction with each other to locate, identify and analyse faecal material. The results demonstrate that an integrated, multi-scalar, multi-methodological approach enables detection, identification, and investigation of a range of faecal attributes and provides new insights into key issues and themes on environment, animal management, diet, health, the built environment and energy sources. This integrated methodology and pilot study highlights two main recommendations. Firstly, modern faecal comparative material should always be consulted within the study region as a baseline for identifying and classifying different types of faecal material. Secondly, micromorphology and GC-MS samples are always vital proxies in further investigations to confirm the nature and identity of the dung sources once potential sample locations have been identified. [ABSTRACT FROM AUTHOR]

In the Minier Valley (France, Aveyron), an archaeological site excavation has led to the discovery of 25 kg of lead (Pb) slag, found in a secondary position. On a macroscopic level, these slags can be classified into two distinct categories, vitreous black and porous gray. This clear visual differentiation has been previously documented at other Pb–silver (Ag) metallurgy sites dating from the 12th century to the 14th century in Europe, and more particularly in the workshops of Mont Lozère, located approximately 80 km away from Le Minier. However, to date, scant evidence exists regarding the specific metallurgical process that produced this slag. This study presents the results of the analysis of 218 Pb slags (Supplemental Material) using portable X-ray fluorescence (pXRF). This method does not appear to be ideally suited for investigating this type of artifact, as it does not provide quantification of oxygen content. Nevertheless, it can be used to quickly identify trends and determine whether the two identified facies exhibit dissimilar chemical compositions. The results indicate that, based on the elemental compositions of the slags, no discernible distinction can be made to categorize them into two separate groups, both in bivariate and multivariate analyses. Consequently, it can be inferred that the gray and black slags originate from a single process executed within the same type of furnace. Scanning electron microscopy energy dispersive spectrometry analyses on selected samples demonstrate that variations in metal content are considerably exaggerated by pXRF, but that the trends observed are confirmed. The use of pXRF is therefore a relevant tool for determining whether or not Pb–Ag slag is the result of the same process. However, this initial approach needs to be refined by other analyses to confirm whether the smelted ores are of local origin and to be able to better define the details of the metallurgical process used. Graphical abstract This is a visual representation of the abstract. [ABSTRACT FROM AUTHOR]

At the Gowanus Canal Superfund site in Brooklyn, New York, layers comprising different granular activated carbon (GAC)/sand blends are being placed as part of a multilayer reactive capping system required for the approved remedy. Depending on the capping zone, the targeted GAC contents can vary from 6% to 60% by dry weight (%). The construction quality assurance (CQA) method for verifying the GAC content of each GAC/sand stockpile consists of loss on ignition (LOI) testing performed at an offsite laboratory with a turnaround time of 3 days. To mitigate construction delays and site congestion at the upland blending site, rapid field (onsite) testing methods to verify the GAC content of the GAC/sand blends were sought. Portable X-ray fluorescence (pXRF) was successfully used on oven dried and crushed GAC/sand materials to develop three linear elemental [calcium (Ca), silicon (Si), and sulfur (S)] correlations with goodness of fit (R2) values greater than 0.95 for Ca and S. Sulfur was not detected in the sand and appeared linked to the bituminous coal source materials for manufacturing the GAC and thus became the primary element to track the GAC content. The measured GAC contents of the CQA samples by pXRF were within 2 to 3 percentage points of the values determined by LOI testing and were obtained onsite within hours. In addition, the pXRF measurements more closely matched the initially batched materials on site that were intentionally overdosed by up to 25% of the GAC blending target to avoid failure. The preliminary correlation presented here provides strong promise for the use of pXRF as the CQA method to furnish accurate GAC content results for the GAC/sand blends onsite within hours (not days) during the implementation of the Gowanus Canal capping remedy. [ABSTRACT FROM AUTHOR]

Copyright of Estonian Journal of Archaeology is the property of Teaduste Akadeemia Kirjastus and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This is the first comprehensive publication of the Knaresborough 1864 hoard of copper-alloy vessels and tools. A consideration of the circumstances of the hoard's discovery, along with a biographical account of Thomas Gott (the man who deposited the hoard in the Yorkshire Museum), for the first time enables a case to be made for a findspot. A consideration of the vessels and other objects establishes the hoard as one of the most unusual assemblages of its kind from late Roman Britain. pXRF analysis of the vessels sheds light on their composition. Finally, a discussion of the hoard places it within the international context of late Roman deposition practices. [ABSTRACT FROM AUTHOR]

Abstract Color variations and sometimes the frosted appearance of Chinese blue-and-white porcelain produced in folk kilns and recovered in underwater archaeological contexts are usually reported without further investigation. This study focuses on the causes responsible for the appearance of the glaze and blue decorations of late fifteenth-century blue-and-white porcelain from the Santa Cruz, one of the most important mid-Ming shipwrecks discovered in Asian waters. Besides detailed visual observations, chemical composition and colorimetric data were collected on a set of similarly shaped plates showing significant differences in the aspect of the glaze and tones and shades of the blue color. Results from portable X-ray fluorescence (pXRF) analysis confirmed the Jingdezhen origin of the ware and the use of domestic asbolane ores for the Co-based blue pigment. Visual and microstructural analysis has shown that the degree of opacity of the glaze is primarily linked to the crystallization of anorthite, which in some cases has pushed the pigment layer towards the surface, contributing to the development of white-brownish weathering spots. The colorimetric data acquired with fiber optics reflectance spectroscopy (FORS) allowed us to quantify chromaticity parameters and confirm the visual perception of a ‘not-so-blue’ color of the decoration. Without excluding a possible contribution of the underwater environment, the observed variations can be mainly attributed to the ware’s production and more specifically to pigment characteristics, manufacturing processes, and firing conditions even though the connection with these factors is not straightforward and prompts further research and broader discussions. From a historical perspective, it is suggested that the atypical hues are correlated with the progressive switch from foreign to domestic pigment sources during the Chenghua period (1465–87 CE) and the subsequent technological adaptations required by an ever-increasing demand for Chinese blue-and-white porcelain at the turn of the sixteenth century.

Roman glass is well studied and known to have been produced from a mineral soda source and calcareous sand with variation between elements relating to naturally occurring minerals in the sands. While the common characteristics of colourants and opacifiers used in opaque and translucent glasses are well understood, the diverse elemental composition of colouring agents associated with the highly specialised, and largely unexplored, technique of enamel-painted glass has never been firmly established. There remains a significant gap in knowledge of pigments used for this technological innovation which is here addressed through the deployment of non-invasive portable X-ray Flourescence (pXRF) analysis and microphotography on a unique Roman enamel-painted gladiator glass from Vindolanda fort. This vanguard research has successfully established, for the first time, a palette of pigments associated with this specialist technique. It is now possible to unravel previously unknown information on complex manufacturing processes and significantly expand the repertoire of the pigments bound up in enamelling recipes used to depict the striking iconographic scenes on the Vindolanda vessel and, potentially, other Roman enamelled glassware. The detection of Cinnabar, Egyptian blue, Orpiment and other pigments are ground-breaking discoveries that will have a transformative impact on early glassmaking studies and push the boundaries of scholarship into new directions of analytical approaches in heritage materials science to complement recent success in this field with Raman spectroscopy and other techniques. The methodology is unprecedented and has been validated through the high quality of the resulting data which permits the extrapolation of elemental compositions of enamelling materials from those associated with the base vessel. This unique approach provides remarkable insights that will revolutionise our understanding of enamelling technologies using the Vindolanda vessel as the investigative platform for forgotten practice.

La presencia en el Tesoro de Villena (Alicante) de dos piezas de hierro, una semiesfera hueca y un brazalete o anilla abierta, han generado polémica en torno a su cronología desde su descubrimiento en 1963. Se presentan los datos de nuevos análisis cuyos resultados abogan en favor de que ambas piezas sean de hierro meteorítico, implicando la posibilidad de ubicar su cronología en algún momento del Bronce Tardío anterior al inicio de la producción de hierro terrestre.

For the purposes of comparison among different equipments and laboratories involved in atomic-nuclear methodologies applied in arts and archaeometry, a special mockup canvas painting was made with dozens of pigments of different colors and varnishes of different types and manufacturers. This study evaluate two different XRF equipment and PIXE methods as complementary tools to examine canvas paintings. Twenty-four inorganic substances of this mockup canvas were measured in three different laboratories, LEC, LFNA, and LAMFI for the identification of the key elements. In this paper, net count ratios and standard percentage deviations between lines are shown, as well as examples of sensibility to low-content elements that can be used for distinguishing pigments, and a comparison of the penetration of these techniques. The results show the differences between the pXRF and PIXE methodologies and between the two pXRF geometry/equipments employed.

According to the Scopus database, over the last five years, 91 scientific papers with the keyword "pXRF" (portable X-ray fluorescence) were published in indexed journals in the domain of environmental science and agricultural science, which indicates more frequent applications of this technique in scientific research. The pXRF method is characterized by speed, precision, accuracy, and the possibility of a simultaneous analysis of a large number of elements, albeit with higher limits of detection (LODs) as a major disadvantage. The presence of metals in certain phosphate fertilizers is well established, though not to the same extent as in mineral nitrogen fertilizers. The aim of this research was to determine the metal content (As, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Si, Sr, Th, U, Zn, Zr, and Y) in thirteen commercial mineral nitrogen fertilizers via the pXRF method. Six straight fertilizers (ammonium nitrate, ammonium sulphate nitrate, limestone ammonium, nitrate, and urea) and seven complex fertilizers (various NPK formulations), which are different even according to their production technology, produced in Croatia were analyzed using the handheld Vanta C (Olympus) XRF analyzer according to the loose powder method and "point and shoot" technique. Data quality control was performed by analyzing the reference fertilizer samples and certified and reference soil samples. The results revealed that the determined contents of Cd, Mn, and Th were relatively higher in the single-component fertilizers, while the contents of As, Cr, Fe, Ni, Si, Sr, Zn, Zr, Y, and U were relatively higher in the complex fertilizers. Due to the higher LODs of Co and Pb (3 mg/kg) and Mo (2 mg/kg), the pXRF method was not appropriate for the determination of these metals in the analyzed fertilizers. The quantified metal content in the analyzed fertilizers varied as follows: 2.0–8.0 mg As/kg; 11.5–31.3 mg Cd/kg; 29.8–118.5 mg Cr/kg; 7.8–26.3 mg Cu/kg; 16.5–2209 mg Fe/kg; 20.3–5290 mg Mn/kg; 6.2–27.8 mg Ni/kg; 1156–4581 mg Si/kg; 2.0–469.8 mg Sr/kg; 3.0–35.3 mg Th/kg; 2.0–82.8 mg U/kg; 1.4–166 mg Zn/kg; 9.7–15.3 mg Zr/kg; and 16.5–128.0 mg Y/kg. The results indicated that the pXRF method is particularly suitable for measurement and metal detection in complex nitrogen mineral fertilizers with higher amounts of metals, but it is not suitable for the detection and quantification of the lower amounts of As, Zr, Y, Cu, Ni, and Cr in single-component nitrogen fertilizers. Compared to all of the investigated fertilizers, the highest amounts of As, Cr, Cu, Fe, Ni, U, Zn, and Zr were quantified in the NPK 7-20-30 formulation. [ABSTRACT FROM AUTHOR]

Forty-two obsidian artifacts excavated at the site of Valdesi in western Sicily were analyzed to determine their geological sources and to reconstruct trade patterns. Non-destructive analysis was performed using a portable, non-destructive X-ray fluorescence spectrometer, with the calibrated element's composition values compared directly with a dataset of geological samples from the Mediterranean and European sources that were analyzed with the same instrument. The results, based on straightforward X-Y graphs using the trace elements Rb, Sr, Y, Zr, and Nb, showed the presence of obsidian from two subsources on Lipari (Gabellotto Gorge, Canneto Dentro), two on Pantelleria (Balata dei Turchi, Lago di Venere), and one on Sardinia. The majority coming from Lipari coincided with the location of Valdesi, and nearly 20% came from Pantelleria, both consistent with the overall distribution patterns for Sicily, while the one from Sardinia is a unique discovery. These results are discussed in terms of the time period and context for Valdesi, as well as the open-water and land-based routes that must have been taken. [ABSTRACT FROM AUTHOR]

This work describes the characterization of pigments and ground layers in two paintings by the renowned Argentinian painter Antonio Berni (1905–1981). The studied paintings are "Toledo" and "Figure" from the collection of the Provincial Museum of Fine Arts in Santa Fe (Argentina). To approach this goal, an integrated investigation comprising in situ X-ray fluorescence measurements by means of a portable system (pXRF), micro-Raman spectroscopy, Attenuated Total Reflection–Fourier transform infrared spectroscopy (ATR-FTIR), and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM–EDS) was carried out. The results revealed a chromatic palette with inorganic pigments, such as ultramarine blue, cobalt blue, lead white, zinc white, yellow cadmium, and hydrated chromium oxide (viridian), together with a preparation layer consisting of a mixture of earth, lead white, and calcite in "Toledo". On the other hand, the preparation layer in "Figure" was characterized as lithopone, a mixture of barium sulfate and zinc sulfide. ATR-FTIR-analysis revealed the formation of metallic soaps in both paintings due to the reaction of fatty acids from a drying oil used as a binder with lead and zinc pigments, as confirmed by comparison with the infrared spectra of synthetic lead and zinc soaps. This study contributes to the understanding of Berni's painting style and the future restoration of both artworks. [ABSTRACT FROM AUTHOR]

Simple Summary: The illegal wildlife trade is a significant threat to biodiversity, with animals being taken from the wild and sold illegally. Often, species with the greatest demand are those that are already threatened, with illegal trade placing even more pressure on these populations. Knowing where traded animals or animal parts have come from is critically important for enforcement, education, and conservation actions. Using three highly traded Philippine species, the Palawan forest turtle, the Philippine cockatoo, and the Philippine pangolin, we developed a novel method of determining the geographic origin of animals or animal parts using a portable X-ray fluorescence device. This method can make significant contributions to combating the illegal wildlife trade through providing a rapid, non-destructive, cost-effective method for identifying the source of traded animals. End users of this tool include enforcement agencies, border force officials, wildlife rescue centres, and conservation researchers. The illegal wildlife trade is a significant threat to global biodiversity, often targeting already threatened species. In combating the trade, it is critical to know the provenance of the traded animal or part to facilitate targeted conservation actions, such as education and enforcement. Here, we present and compare two methods, portable X-ray fluorescence (pXRF) and stable isotope analysis (SIA), to determine both the geographic and source provenance (captive or wild) of traded animals and their parts. Using three critically endangered, frequently illegally traded Philippine species, the Palawan forest turtle (Siebenrockiella leytensis), the Philippine cockatoo (Cacatua haematuropygia), and the Philippine pangolin (Manis culionensisis), we demonstrate that using these methods, we can more accurately assign provenance using pXRF data ( x ¯   = 83%) than SIA data ( x ¯   = 47%). Our results indicate that these methods provide a valuable forensic tool that can be used in combating the illegal wildlife trade. [ABSTRACT FROM AUTHOR]

The Universitat de València brings together artistic collections of great value that embrace more than five centuries of history (1499–2022). Among them, the collection of contemporary painting stands out for its diversity of artists, artistic techniques and themes. One of the aims of the Vice‐rectorate for Culture and Society of the Universitat de València is the study, conservation and dissemination of its art collection, implementing innovative methodologies that will place these artworks at the research and transfer frontline. To achieve this, the Laboratory for Analysis and Diagnosis of Works of Art of the Universitat de València: Conservation, Legacy, InnOvation has recently optimized a multi‐analytical artistic diagnosis approach that combines the use of multiband technical photography (MTP) with digital radiography, infrared reflectography (IRR) and hyperspectral camera. The noninvasive methodology developed for the studied paintings, belonging to different historical periods, is completed by using a portable X‐ray fluorescence. The final goal is to obtain useful information on the composition and execution technique, issues of great interest for developing preventive conservation plans for the collections and for the design of innovative exhibition proposals of an immersive and accessible nature. This article presents the results obtained for three paintings that were made by one of the most unknown Valencian painters of the early 20th century, despite the great quality of his work: Manuel Moreno Gimeno (1900–1982). These paintings are part of the aforementioned art collection of the Universitat de València, and are housed at the Faculty of Medicine. In this study, the use of MTP, IRR and hyperspectral imaging techniques were combined with the analysis of the pictorial surface using a portable optical microscope and a portable X‐ray fluorescence. The results obtained indicate that Manuel Moreno Gimeno developed a landscape painting technique that was very close to that of other Valencian painters of the early 20th century. The handling of light and color was achieved using a rich color palette that included numerous contemporary innovative pigment such as chrome or cadmium. [ABSTRACT FROM AUTHOR]

Copyright of Zephyrus is the property of Ediciones Universidad de Salamanca and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Complutum is the property of Universidad Complutense de Madrid and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

On-site pXRF analysis in various French collections (Musée du Louvre, Musée national des Arts asiatiques-Guimet, Paris) of porcelains decorated with painted enamels from the Qing Dynasty, in particular porcelains bearing an imperial mark, identifies the types of enamels/glazes, the ions and coloring phases or the opacifier. The study of the elements associated with cobalt (nickel, manganese, arsenic, etc.) and of the impurities of the silicate matrix (yttrium, rubidium and strontium) differentiates the use of ‘Chinese/Asian’ raw materials from ones imported from Europe by the initiative of the European missionaries (chiefly Jesuits) present at the Court (Beijing). Particular attention is paid to the analysis of the blue color of the marks and to the elements associated with the use of gold or copper nanoparticles as well as to the compositions of the pyrochlore phases (tin yellow, Naples yellow). The comparison is extended to pXRF and Raman microspectroscopy measurements previously made on other Qing imperial porcelains as well as on Cantonese productions (on porcelain or metal) from different Swiss and French museums and blue-and-white wares of the Ming and Yuan Dynasties (archaeological and private collections).

The study of rare objects requires the use of mobile non-invasive methods such as a portable X-ray fluorescence instrument (pXRF), but this involves an analysis from the outer surface, while the depth analyzed depends on the element measured and, in addition, the material can be very heterogeneous at different scales. The concept of elemental composition, therefore, has no “absolute” meaning for painted enamel decorations. This work evaluates this concept by comparing the pXRF measurements made with different configuration procedures, allowing to evaluate the consequences on the variability of the XRF signals, and discusses the contents of certain chemical elements. For this, two shards from the Qianlong period are analyzed, a shard of blue and white (underglazed) porcelain and a fragment of an ‘imperial’ bowl with painted enamel decoration (huafalang). The variability of measurements is compared for visually appearing homogeneous or heterogeneous areas.

Highlights Information concerning the mineral contents of spices is lacking. Spices are a good source of several minerals and contribute to dietary intakes of nutritionally important minerals. Nutrition intervention, including food-to-spice fortification for improving mineral intakes by refugee community, is required.

Abstract The Antonine Wall was commissioned by the Roman Emperor Antoninus Pius around 142 CE and stretches for c. 60 km across the central belt of Scotland, marking the Empire’s most north-western frontier. This vanguard research reports on the materials referred to by Antiquarian sources as having been applied during the sixteenth century for the redecoration of an iconic Distance Sculpture that was once embedded into the mural barrier. Portable non-invasive technologies, including pXRF and in-situ microphotography were deployed. These techniques were further supplemented by micro-sampling for SEM/EDS, FTIR–ATR and microscopy of embedded cross-sections. The validity of applying these complementary techniques has been confirmed. They provide a comprehensive account of the polychromy present, including pigments that could have been applied during the Roman period and others that were only available from the fifteenth or sixteenth Centuries. The work has confirmed stratigraphic sequencing of the pigments which will, in due course, permit the digital reconstruction of how this Classical relief sculpture would have been adorned during the Renaissance.

Color variations and sometimes the frosted appearance of Chinese blue-and-white porcelain produced in folk kilns and recovered in underwater archaeological contexts are usually reported without further investigation. This study focuses on the causes responsible for the appearance of the glaze and blue decorations of late fifteenth-century blue-and-white porcelain from the Santa Cruz, one of the most important mid-Ming shipwrecks discovered in Asian waters. Besides detailed visual observations, chemical composition and colorimetric data were collected on a set of similarly shaped plates showing significant differences in the aspect of the glaze and tones and shades of the blue color. Results from portable X-ray fluorescence (pXRF) analysis confirmed the Jingdezhen origin of the ware and the use of domestic asbolane ores for the Co-based blue pigment. Visual and microstructural analysis has shown that the degree of opacity of the glaze is primarily linked to the crystallization of anorthite, which in some cases has pushed the pigment layer towards the surface, contributing to the development of white-brownish weathering spots. The colorimetric data acquired with fiber optics reflectance spectroscopy (FORS) allowed us to quantify chromaticity parameters and confirm the visual perception of a 'not-so-blue' color of the decoration. Without excluding a possible contribution of the underwater environment, the observed variations can be mainly attributed to the ware's production and more specifically to pigment characteristics, manufacturing processes, and firing conditions even though the connection with these factors is not straightforward and prompts further research and broader discussions. From a historical perspective, it is suggested that the atypical hues are correlated with the progressive switch from foreign to domestic pigment sources during the Chenghua period (1465–87 CE) and the subsequent technological adaptations required by an ever-increasing demand for Chinese blue-and-white porcelain at the turn of the sixteenth century. [ABSTRACT FROM AUTHOR]