Search

The Yulekenhalasu porphyry Cu-Mo deposit (0.2 Mt Cu at 1.04 wt% and 0.012 Mt Mo at 0.06 wt%) is located in the Devonian Halasu copper belt, East Junggar block, northwest China. At Yulekenhalasu, Cu and Mo mineralization commonly occurs as disseminated sulfides or veinlets in porphyry-related alteration zones. Five alteration stages have been identified, including porphyry-type alteration, i.e., sodic-calcic (stage I), potassic (stage IIa), propylitic (stage IIb), and phyllic (stage III) alteration, and widespread late Cu sulfide-bearing veins (stage IV) cross-cutting porphyry-type alteration, plus a post-ore fault-controlled argillic alteration (stage V). Stages IV and V have overprinted porphyry-type alteration (stages I–III). Anomalous concentrations of trace elements in stage IIb pyrite (e.g., Ti, Zr, Gd, and Hf) are due to the presence of micro-inclusions (e.g., zircon and rutile) in the low-temperature (~200 °C) propylitic zone. Cu, Ag, Co, and Mn, occurring as stoichiometric substitutions or as tetrahedrite inclusions in overprinting stage IV pyrite, were sourced directly from the primary hydrothermal fluid. The enrichment of distal pathfinder elements (e.g., Cr, Au, and Tl) in overprinting stage V pyrite was caused by a low-temperature (~160 °C) hydrothermal event related to regional orogenic Au mineralization. The spatial variation of Se/S in pyrite among various paragenetic stages were influenced by changes in the hydrothermal fluid composition and temperature, with the latter having the effect of decreasing pyrite Se/S. Lower Se concentrations in pyrite of stages IIb and III close to the orebody are explained by relatively higher temperatures in the locus of mineralization. This may provide a potential vectoring tool to mineralization using pyrite geochemistry in porphyry deposits. Systematic thermodynamic calibrations were applied to pyrite compositions to fingerprint the corresponding Se/S and Co/Ni ratios of fluids and further to develop a complete metallogenic model for Yulekenhalasu. The Devonian diorite porphyry generated fluids that produced the early porphyry-type alteration. High Co/Fe (average ~1 × 10–4) and Ni/Fe (average ~3 × 10–6) ratios of fluid for late Cu sulfide-bearing veins, combined with higher Se/S (average ~6 ×x 10–7) than orogenic Au deposits (average ~3 × 10–8), indicate that the fluids possibly derived from a Late Devonian-Carboniferous mafic intrusion. Argillic alteration assemblages forming at ca. 280 Ma host pyrite relatively enriched in Au (average 0.1 ppm, with native gold inclusions). Therefore it is likely related to a regional orogenic gold mineralizing event in the Early Permian that overprinted Devonian mineralization. Although spatially contiguous, hydrothermal alteration and hypogene mineralizing stages identified herein represent discrete episodes of hydrothermal activities at Yulekenhalasu. The multi-stage alteration features observed at Yulekenhalasu may provide insights into the complete evolutionary history of Paleozoic porphyry Cu deposit systems in the Central Asian orogenic belt. This study contributes to a better understanding of the metallogenic and exploration models of porphyry Cu deposits overprinted by multi-stage hydrothermal events, which is economically important in Phanerozoic orogenic belts. [ABSTRACT FROM AUTHOR]

Late Palaeozoic evolution of the Chinese Altai-East Junggar orogenic collage is vital for a better understanding of the accretionary evolution in the southern Altaids. This paper reports new geochronological, geochemical, and isotopic data for the magmatic rocks collected from the northern part of the Dulate arc. The ~304.6 Ma tonalite samples present typical adakitic features of high Sr (396–714 ppm), low Y (1.42–2.60 ppm), Yb (0.11–0.24 ppm), and high Sr/Y (177.25–440.23) ratios. Combining high Mg# (55.35–57.21) and depleted isotopic composition (εHf(t): +9.89 to +13.37 and εNd(t): +5.36 to +6.06), we suggest that they were derived from the partial melting of a subducted oceanic slab. The ~299.4 Ma monzogranite samples have high A/CNK values (1.08 to 1.25), CIPW normative corundum contents (1.28–3.25 wt.%), and positive εHf(t) (+5.14 to +8.63) and εNd(t) (+1.08) values, which are similar to S-type granite that may be generated by the melting of greywackes. The monzogranite (~286.9 Ma) and rhyolitic porphyry (~283.9 Ma) are high-K calc-alkaline and similar to the highly fractionated I-type granites with depleted isotopic features (εHf(t): +11.68 to +14.99 and +0.75 to +7.18, εNd(t): +5.91 and +6.18). The monzogranite and rhyolitic porphyry could have been derived from a depleted mantle source, but the rhyolitic porphyry probably suffered partial assimilation of the overlying crust materials. Combining regional rock associations of mafic-ultramafic complexes, adakitic rocks, high-Mg diorites, and A-type granites with close spatial-temporal relationship, we conclude that a mid-oceanic ridge of the Ob-Zaisan Ocean subducted southward beneath the Dulate arc during the latest Carboniferous to Permian. With the opening of the slab window, the upwelling asthenosphere provided high heat flux and triggered various magmatism in the upper plate. We propose that ridge subduction is one of the most effective mechanisms of continental growth in the southern Altaids. [ABSTRACT FROM AUTHOR]

In this essay, I argue for a new analysis of Porphyry’s argument for justice in On abstinence. I aim to show that (i) in addition to being an inner order of soul, justice is attributed to external actions and (ii) justice of actions consists in refraining from harming harmless living creatures, including animals and plants. The relevant harm, I argue, consists in taking the lives of living creatures and taking products from them by force or without care. I contend that Porphyry extends moral concern for others to all living creatures, but not merely on the basis of animal suffering. Finally, I argue that that the hierarchy of godlikeness in On abstinence does not support the subordination of moral concern for animals and plants to higher virtues of purity and theory. [ABSTRACT FROM AUTHOR]

The Yulong porphyry copper belt in eastern Tibet is located in the middle of Tethys–Himalayan metallogenic mega-province, which is one of the three major porphyry copper metallogenic mega-provinces. The Yulong copper belt belongs to the super porphyry copper belt and represents one of the most important copper mineralization prospecting areas in China. A significant quantity of research data shows that this study area belongs to the environment of intracontinental collision and compression, with a complex geological structure, magmatic rock development and excellent metallogenic geological background. However, because this area is located in an alpine and high-altitude area, it is difficult to carry out any traditional field geological surveys, and the existing studies of both prospecting and prediction are relatively weak. This study focused on information extraction for alteration minerals in the Yulong metallogenic belt and its surroundings based on multispectral data and hyperspectral data, establishing a spectral library of alteration minerals in this area. Based on Sentinel-1A radar data and Landsat-8 OLI color synthesis data, the linear structure of the study area was interpreted. On this basis, the information extraction results relating to alteration minerals obtained from multi-source remote sensing data, linear structure interpretation results and the geochemical exploration data of the study area were superimposed to comprehensively analyze the metallogenic geological conditions and mineralization characteristics in the area, establish remote sensing prospecting indicators there and optimize the potential areas for prospecting, providing technical support for the next step of prospecting and exploration in the area. [ABSTRACT FROM AUTHOR]

The timing and extent of sulfide saturation have been suggested as controlling factors in the formation of economically significant porphyry Cu deposits in subduction zone settings. However, details on the sulfide saturation history in post-collisional porphyry systems remain ambiguous. Accordingly, we have characterized the whole-rock geochemistry, including platinum-group elements (PGE), of igneous intrusions in the post-collisional Chongjiang porphyry Cu–Mo–Au deposit (southern Tibet) and utilize this data in conjunction with zircon U–Pb geochronological results and sulfide chemistry to assess the timing of sulfide saturation, the nature and amount of magmatic sulfide produced. The Chongjiang intrusions (monzogranite, biotite monzogranite porphyry, granodiorite, dacite porphyry, and quartz diorite porphyry) and mafic microgranular enclaves (MMEs) have zircon U–Pb ages of 14.2 to 12.8 Ma. Covariations in whole-rock major and trace elements among the Chongjiang intrusions and MMEs, together with similarities in their Sr–Nd and zircon Hf isotope compositions, indicate that they are co-magmatic and crystallized from a juvenile lower crustal melt that mixed with mafic melt derived from the lithospheric mantle; this hybrid melt subsequently evolved via fractional crystallization. Trace-element ratios in zircon and temperature − ∆FMQ estimates of the different intrusions suggest that they all crystallized from oxidized (average ∆FMQ = 1.9–2.6) and water-rich magmas. Palladium contents and Pd/Pt ratios in the Chongjiang igneous intrusions increase with decreasing MgO up to 3.9 wt % MgO, after which they abruptly decrease. The initial increase in Pd/Pt ratios likely results from the fractionation of a Pt-rich mineral (e.g. Pt–Fe alloy). The decrease in Pd contents and Pd/Pt ratios at 3.9 wt % MgO likely results from sulfide saturation during magma evolution, but prior to volatile exsolution, which occurred at approximately 1.4 to 2.4 wt % MgO. The presence of magmatic sulfide inclusions in amphibole and magnetite in samples with 3.9 wt % MgO, and the geochemical compositions of sulfide inclusions suggest that they represented trapped sulfide liquid and intermediate solid solution. Results of Monte Carlo simulations demonstrate that 0.003 to 0.009 wt % magmatic sulfide is required to have fractionated from the magma to explain the decrease in Pd contents at 3.9 wt % MgO. Highly chalcophile elements, such as Pd, will be sequestered by the magmatic sulfide that saturates at depth, decreasing their concentrations in the residual silicate melt, whereas concentrations of the less chalcophile elements, such as Cu, Mo, and even Au, will not be as significantly affected. Consequently, sufficient concentrations of Cu–Mo–Au will remain in the residual melt and, upon reaching volatile saturation, can be transported by the vapor phase to form porphyry Cu–Mo–Au deposits. In the case of the Chongjiang deposit, sulfide saturation was likely triggered by the high pressures and/or depletion of FeO caused by the thick (~70 km) crust beneath the Gangdese belt. This contribution presents evidence of sulfide saturation in post-collisional magmatic systems, and demonstrates that the amount of magmatic sulfide produced is a critical factor in controlling the formation of post-collisional porphyry Cu deposits. [ABSTRACT FROM AUTHOR]

Subduction zone magmatism is a major control of volcanism, the generation of modern continental crust and the formation of economically important porphyry Cu–(Mo–Au) deposits. Reading the magmatic record of individual arc segments and constraining the rates of magmatic changes are critical in order to fully understand and quantify the processes that drive magma evolution in subduction settings during arc growth. This study focuses on the San Francisco Batholith and the Rio Blanco-Los Bronces porphyry deposit cluster in central Chile, which provides an igneous rock record over ~13.5 Myr of arc evolution. We use whole-rock geochemistry, zircon geochronology and Hf isotope geochemistry to track changes in the crustal magmatic system of this arc segment during crustal thickening and porphyry Cu deposit formation. By combining the analytical dataset with Monte Carlo fractional crystallisation and assimilation fractional crystallisation modelling, we test a model for significant crustal involvement during magma evolution. Systematic and continuous increases in Dy/Yb, La/Yb, V/Sc and Sr/Y in the magmas over time indicate a transition in the main fractionation assemblage from plagioclase-dominated to amphibole-dominated that reflects deeper crystallisation and/or a higher meltwater content. Concomitant decreases in εHf and Th/La as well as increasing Ba/Th are best explained by assimilation of progressively deeper crustal lithologies from low (Chilenia) to high Ba/Th (Cuyania) basement terranes. Our study highlights that an increasingly hydrous magma and a deepening locus of crustal magma differentiation and assimilation, driven by crustal thickening contemporaneous with increased tectonic convergence and ingression of the aseismic Juan Fernandez ridge, can account for all investigated aspects of the multi-Myr magmatic evolution leading up to the formation of the Rio Blanco-Los Bronces porphyry Cu deposits. Our findings corroborate the importance of high-pressure differentiation of hydrous magma for the formation of Andean-style porphyry deposits. Once magmas favourable for porphyry Cu mineralisation were generated in the lower crust, multiple episodes of efficient magma migration into the upper crust fed several, discrete, shallow magmatic-hydrothermal systems over ~3.5 Myr to form the world's largest known Cu resource at Rio Blanco-Los Bronces. [ABSTRACT FROM AUTHOR]

The Jiama deposit, a significant porphyry‐skarn‐type copper polymetallic deposit located within the Gangdese metallogenic belt in Tibet, China, exemplifies a typical porphyry metallogenic system. However, the mineral chemistry of its accessory minerals remains under‐examined, posing challenges for resource assessment and ore prospecting. Utilizing electron microprobe analysis and LA‐ICP‐MS analysis, this study investigated the geochemical characteristics of apatite in ore‐bearing granite and monzogranite porphyries, as well as granodiorite, quartz diorite, and dark diorite porphyries in the deposit. It also delved into the diagenetic and metallogenic information from these geochemical signatures. Key findings include: (1) The SiO2 content, rare earth element (REE) contents, and REE partition coefficients of apatite indicate that the dark diorite porphyry possibly does not share a cogenetic magma source with the other four types of porphyries; (2) the volatile F and Cl contents in apatite, along with their ratio, indicate the Jiama deposit, formed in a collisional setting, demonstrates lower Cl/F ratios in apatite than the same type of deposits formed in a subduction environment; (3) compared to non‐ore‐bearing rock bodies in other deposits formed in a collisional setting, apatite in the Jiama deposit exhibits lower Ce and Ga contents. This might indicate that rock bodies in the Jiama deposit have higher oxygen fugacity. Nevertheless, the marginal variation in oxygen fugacity between ore‐bearing and non‐ore‐bearing rock bodies within the deposit suggests oxygen fugacity may not serve as the decisive factor in the ore‐hosting potential of rock bodies in the Jiama deposit. [ABSTRACT FROM AUTHOR]

Paleoproterozoic A-type granites are widely distributed in the southern margin of the North China Craton (SNCC), providing important information for understanding the Paleoproterozoic tectonic regimes in this area. This paper reports newly obtained whole-rock compositions and zircon U-Pb ages for the Tieluping syenogranite porphyry (TLP) and Huoshenmiao alkali granite porphyry (HSM) in the SNCC. Zircons from the TLP and HSM have U-Pb ages of 1 805 ± 12 and 1 792 ± 14 Ma, respectively. These ages are taken to date the emplacement of these intrusions. They had high total alkali contents (K2O + Na2O > 7.13 wt.%), with high 10 000 × Ga/Al ratios (3.06–3.41) and Zr + Y + Nb + Ce values (709 ppm–910 ppm) as well as high zircon saturation temperatures (864–970 °C), indicative of A-type granite affinities. High Y/Nb (1.75–3.32), Ce/Nb (7.72–9.72), and Yb/Ta (2.89–5.60) ratios suggested that TLP and HSM belonged to the A2-type granite. The negative whole rock εNd(t) values (−8.4 to −6.6) and negative zircon εHf(t) values (−15.9 to −6.3) confirmed that TLP and HSM were likely generated by the partial melting of an ancient continental crust. The εHf(t) (−7.4 to +4.0) values of inherited zircons in the TLP suggested that they were derived from the partial melting of Archean basement rocks. Considering the geochemical similarity of the 1.80 Ga A-type granitoids in the SNCC, we propose that the TLP and HSM were formed in a post-collisional regime that was likely associated with the break-off of the Paleoproterozoic subducted slab. Upwelling of the asthenosphere provided huge heat to generate the regional 1.80 Ga A-type granite in the SNCC. [ABSTRACT FROM AUTHOR]

Metamorphosed dacitic porphyry dikes were first found in the western part of the Vorontsovka terrane, which is located in the Paleoproterozoic Volga–Don orogen at the margin of Archean Sarmatia and Volga–Ural cratons. The magmatic protolith age for the metadacites is ca. 2.07 Ga. These are ferrous, metaluminous calc-alkali I-type granitoids. The sodium specialization of the rocks and their low concentrations of Mg, Cr, Ni, and incompatible elements, with significant REE fractionation, the absence of Eu* anomalies, high Sr/Y ratio, remarkably high (Gd/Yb)n values (>10), and the radiogenic Nd isotopic composition indicate that the dacitic melts were derived from a juvenile mafic source. According to petrogenetic estimations, such conditions could be caused by the partial melting of depleted N-MORB basites in equilibrium with an eclogitic residue. The dacitic magmas were likely generated by the partial melting of mafic rocks at lower levels of the significantly thickened crust (>60 km) in relation to collision processes. [ABSTRACT FROM AUTHOR]

The Chagai belt to the north of the Afghan block and the east of the Iranian block in the western part of Pakistan is known for occurrence of Oligocene to Miocene calc‐alkaline magmatic belt. The present study discusses the characteristics of episodic magmatic activities that contributed to mineralization for the Reko Diq porphyry complex in the western part of the Chagai belt. U–Pb dating of zircons from volcanic rocks of the Reko Diq porphyry complex yielded ages of 25.8 ± 1.8 and 12.29 ± 0.44 Ma for two phases of magmatic crystallization. Geochemical analyses of whole‐rock rhyolite and dacite indicate that the rock units are peraluminous calc‐alkaline, derived from Andean‐type subduction. The magma was formed due to partial melting of the thickened mafic lower crust in a continental arc setting in relation to the subduction of the Neotethys along the Makran subduction zone. The abundance of zircons, Hf, REE, U/Pb and Th indicates high degrees of magmatic evolution. Moreover, the Sr and Nd isotopic data indicate the fractional contribution of depleted N‐MORB mantle to the Reko Diq magmas through bulk mixing with magmas derived from the lower continental crust. Short‐lived magmatic systems repeated magma injection, and various episodes of hydrothermal fluid flow have led to the formation of porphyry mineralization. Emplacement of the Reko Diq porphyry complex and related Cu–Au mineralization is associated with a series of tectonic–magmatic events at different episodes of the Oligocene–Miocene times. [ABSTRACT FROM AUTHOR]

Delineation of hydrothermal alteration zoning is important for exploration vectoring toward mineralization centers in porphyry systems, and shortwave infrared (SWIR) spectroscopy is widely used to map hydrothermal minerals distribution for porphyry Cu exploration. However, the SWIR method cannot effectively detect anhydrous alteration minerals (e.g., K-feldspar) in the potassic zone. Magnetite can be formed by potassic alteration and destroyed by phyllic (quartz-sericite-pyrite) alteration. The relative intensity of these two alteration types can be quantified by magnetic susceptibility. Here, we integrate the SWIR and magnetic susceptibility measurements to map hydrothermal alteration zones at the Pulang porphyry Cu-Au deposit in northwestern Yunnan, one of the largest porphyry deposits in the SW China-mainland SE Asia region. White mica, chlorite, and montmorillonite + kaolinite were identified in ~ 60%, ~ 30%, and ~ 15% of the analyzed samples from the Pulang deposit, respectively. Volumetric bulk magnetic susceptibility (Kbulk) values are high in the potassic-altered rocks, but low in phyllic-altered rocks. Using white mica as a proxy for sericite alteration, white mica-chlorite assemblage for chlorite-sericite alteration, chlorite-epidote-actinolite assemblage for propylitic alteration, montmorillonite-kaolinite-dickite assemblage for argillic alteration, and Kbulk (> 0.5 × 10–3 SI) for potassic alteration, we delineate the alteration zoning at Pulang. From the causative porphyry center outward, four alteration zones are delineated (potassic → chlorite-sericite → sericite → argillic). The ore-distal propylitic alteration was developed both in the shallow and deeper levels of the hydrothermal system, resembling typical porphyry-style alteration zoning patterns. Our work shows that high Kbulk value is a useful vector toward Cu mineralization at Pulang, whereas illite crystallinity (SWIR-IC), white mica Al–OH spectral absorption peak, and chlorite Fe-OH spectral absorption peak are less effective. We highlight that magnetic susceptibility measurement is an effective alteration-mapping method when mineralization is developed in the potassic zone (with largely aspectral minerals such as quartz, K-feldspar, and magnetite), while SWIR scalars are more useful when mineralization is developed in the phyllic and/or propylitic zones. [ABSTRACT FROM AUTHOR]

The Gangdese belt in Xizang has experienced both Jurassic subduction and Cenozoic continental collision processes, making it a globally renowned region for magmatic rocks and porphyry copper deposits. Numerous Jurassic intrusions have been identified in the belt. Apart from the quartz diorite porphyry in the large Xietongmen deposit, the Cu mineralization potential of other Jurassic intrusions in this belt remains unclear. This study presents zircon U–Pb dating and trace elements, apatite major and trace elements as well as published whole-rock geochemical and isotopic data of the Dongga tonalite in the central part of the Gangdese belt, aiming to reveal the petrogenesis, oxidation state, volatile content, and Cu mineralization potential of this intrusion. The Dongga tonalite has a zircon U–Pb age of 179.4 ± 0.9 Ma. It exhibits high whole-rock V/Sc values (8.76–14.6), relatively low apatite CeN/CeN* ratios (1.04–1.28), elevated zircon (Eu/Eu*)N values (an average of 0.44), high Ce4+/Ce3+ values (205–1896), and high ∆FMQ values (1.3–3.7), collectively suggesting a high magmatic oxygen fugacity. The Dongga tonalite features amphibole phenocrysts, relatively high whole-rock Sr/Y ratios (20.3–58.9), and lower zircon Ti temperatures (502–740 °C), reflecting a high magmatic water content. Estimation of magmatic sulfur content (0.002–0.024 wt%) based on apatite SO3 contents indicates an enriched magma sulfur content. Combined with previous studies and the collected Sr–Nd–Hf isotopes, the Dongga tonalite is derived from juvenile lower crust related with subduction of the NeoTethys oceanic slab. When compared with Xietongmen ore-bearing porphyries, the Dongga tonalite exhibits remarkable similarities with the Xietongmen ore-bearing porphyries in terms of magma source, tectonic background, magmatic redox state, and volatile components, which indicates that the Dongga tonalite has a high porphyry Cu mineralization potential, and therefore, provides important guidance for the future mineralization exploration. [ABSTRACT FROM AUTHOR]

The Haib porphyry copper deposit is situated in the Richtersveld Subprovince and is host to unique Palaeoproterozoic porphyry copper mineralisation in Namibia. Several lines of evidence, including machine-learning geothermobarometry, indicate that the deposit is exposed at mid- to upper-crustal levels, as constrained from average pressure and temperature estimates of 4 kbar and 870°C, respectively. The Haib porphyry copper deposit is associated with, and is in close proximity to, a mafic-ultramafic intrusion named the Kokerboom Intrusion (KI) in this study. Together with several other mafic intrusions in this region, these intrusions are known collectively as the Vuurdood Subsuite of the Richtersveld Subprovince. The purpose of this study is to demonstrate a genetic link between the KI and the Vuurdood Subsuite using lithological characteristics, mineral and alteration assemblages, major and trace element geochemistry and U-Pb geochronology. Pyroxenites from the KI contain magmatic sulphides and have a geochemical affinity with shallow plutonic and volcanic rocks of the Haib porphyry, providing a unique mid-crustal perspective on porphyry copper deposit metallogenesis. [ABSTRACT FROM AUTHOR]

The large magma reservoirs underlying world-class porphyry deposits are one of the key factors in their formation, which thus led to the present study focusing on the unmineralized intrusive rocks underlying the porphyry molybdenum-copper orebody of the post-collisional Jiama porphyry-skarn copper-polymetallic deposit in southern Tibet. The Jiama porphyry intrusion comprises intermediate-silica quartz diorite, monzogranite, and granodiorite porphyries, as well a high-silica granite porphyry. The intrusive rocks suite exhibits similar whole-rock Sr-Nd isotopic compositions [εNd(t) = -3.9 to -0.8], suggesting a common, non-radiogenic magma source. Yet, these rocks have distinct geochemical characteristics. The intermediate-silica rocks are relatively enriched in Ba and Sr with minor Eu anomalies, and show adakite-like geochemical characteristics. In contrast, the high-silica granite porphyry is strongly depleted in Ba, Sr, and Eu, and lacks adakite-like geochemical characteristics. We propose that the high-silica granite porphyry represents highly fractionated melt extracted from a silicic mush reservoir (crystallinity of ∼40%-65%), and that the monzogranite and granodiorite porphyries constitute the complementary residual silicic cumulates. High crystallinity facilitates the formation of connected fluid pathways, allowing the efficient removal of volatiles from the remaining silicic melt and a rapid flux of the ore-forming fluids toward the apical parts of the large magma reservoir. Less-evolved mafic melt is believed to have repeatedly intruded the base of the magma reservoir, thereby releasing volatiles and water into the silicic mush systems. The volatiles migrated upward through the fluid channels and accumulated in the apical part of the magma reservoir, subsequently, as a result of the overpressure in the roof zone, ore-forming fluids and successive batches of magma were expelled together, thereby forming the Jiama porphyry-skarn deposit. [ABSTRACT FROM AUTHOR]

The Ulgen porphyry Mo deposit, recently discovered in the northeastern segment of the Derbugan metallogenic belt, NE China, is a large and hidden ore deposit. Investigation of this deposit provides insights into the geodynamic background and metallogenic mechanism of Mesozoic porphyry Mo deposits that are exposed elsewhere in NE China. The host rocks consist of muscovite monzonitic granite (MMG) and biotite granitic porphyry (BGP), which are intruded into Lower and/or Middle Jurassic intermediate-felsic volcanic-sedimentary rocks and pre-ore monzogranitic porphyry (MP). Zircon laser ablation-inductively coupled plasma-mass spectrometric (LA-ICP-MS) U-Pb age dating indicates that the MMG and BGP were emplaced at 144.9 Ma and 144.7 Ma, ca. 14 m.y. younger than the intrusion age of MP (159.3 Ma). Molybdenite Re-Os isotopic dating indicates that Mo mineralization occurred at 144.9 Ma, almost simultaneously with the 145 Ma magmatic activity. Geochemically, all of the Ulgen granitoids are enriched in large ion lithophile elements (e.g., Rb, Th, U, and K) and light rare earth elements, and are depleted in high field strength elements (e.g., Nb, Ta, and Ti). The pre-ore MPs belong to I-type granites with moderately negative Eu anomalies (Eu/Eu* = 0.62-0.65), whereas the syn-ore MMGs exhibit S-type affinity with pronounced negative Eu anomalies (Eu/Eu* = 0.29-0.39). The ore-forming BGPs display adakite-like geochemical features in terms of high-Sr, low-Y, and low-Yb contents, and slightly negative Eu anomalies (Eu/Eu* = 0.72-0.74). All intrusive rocks have relatively low initial (87Sr/86Sr)i ratios (0.7044-0.7055) and positive εNd(t) values (+1.15 to +2.65), positive εHf(t) values (+4.0 to +9.4), young two-stage Nd and Hf model ages (tDM2(Nd) = 841-731 Ma, tDM2(Hf) = 943-604 Ma), and moderate (206Pb/204Pb)i (18.300-18.402), (207Pb/204Pb)i (15.557-15.564), and (208Pb/204Pb)i (38.180-38.307) ratios. Therefore, it is most likely that these intrusive rocks originated from a mixture of two sources of magma derived from the mantle and juvenile lower crust, in which there were variable degrees of the fractional crystallization of ilmenite, apatite, and plagioclase. Rather than the partial melting of oceanic slabs, the fractional crystallization of hornblende and accessory minerals (e.g., ilmenite and apatite) induces the adakitic geochemical signature of BGPs. Compared with the BGPs, the MPs had a relatively deeper magma source region, whereas the MMGs had a relatively shallower magma source region. The BGPs and the Mo-bearing fluids of the Ulgen deposit were most probably derived simultaneously from magma that was generated at an extensional setting following the closure of the Mongol-Okhotsk Ocean during the latest Jurassic. Enrichment of Mo by late-stage fractional crystallization most likely played an important role in concentrating Mo during the formation of the Ulgen hidden Mo deposit. [ABSTRACT FROM AUTHOR]

The Bayan-Uul porphyry Au-Cu-(Mo) deposit occurs within the Mongol–Okhotsk Orogenic Belt, which is a part of the Central Asian Orogenic Belt. To understand geotectonic, petrogenesis, mineralization, and ore-forming fluid evolution of the Bayan-Uul deposit, we report petrographic and geochemical analyses of host rocks, mineralogy of ores, and fluid inclusion characteristics. Based on petrographic and mineralogical analyses, Cu, Mo, and Au mineralization occurs as disseminated and sulfide-bearing quartz–tourmaline veins hosted within granodiorites, monzodiorites, and diorite porphyry and tourmaline breccia. Four main alteration assemblages are identified: potassic, phyllic, argillic, and quartz–tourmaline alteration. The ore mineralogy of quartz–tourmaline veinlets are classified into A-type veinlets (quartz + tourmaline + chalcopyrite + magnetite + pyrite ± electrum), B-type veinlets (quartz + tourmaline + molybdenum + chalcopyrite + pyrite), and C-type veinlets (quartz + tourmaline + pyrite ± chalcopyrite). Fluid inclusions are found in quartz–tourmaline veinlets consisting mainly of liquid-rich two-phase (L-type), vapor-rich two-phase (V-type), and solid-bearing multi-phase (S-type) inclusions. The homogenization temperatures for the fluid inclusions in A-type, B-type, and C-type veinlets range from 215 to 490°C, 215 to 500 °C, and 160 to 350 °C and their salinity varies from 5.4 to 43.5 wt.%, 16 to 51.1 wt.%, and 3.4 to 24.1 wt.% NaCl equivalent, respectively. Coexistance of (L-type), (V-type), and (S-type) inclusions support fluid boiling. The δ18O values of ore fluids from different mineralizing A-, B-, and C-type veins are 8.7‰, 10.9‰, and 8.4‰, respectively, and the δ34S values of sulfide minerals range from −1.4‰ to 5.3‰, which indicates magmatic origin. [ABSTRACT FROM AUTHOR]

The Wunugetu deposit, a large-scale porphyry copper–molybdenum deposit, is located in the southern Erguna block. Its ore bodies are primarily found within monzogranites, granite porphyries, and biotite monzogranites. Additionally, the deposit contains late-stage intrusive dykes of rhyolitic porphyries. This study examined the deposit's monzogranites and rhyolitic porphyries using lithogeochemistry, zircon U-Pb dating, and Hf isotopic analysis. The main findings include: (1) Zircon U-Pb dating showed that the monzogranites formed around 209.0 ± 1.0 Ma, whereas the rhyolitic porphyries in the northern portion formed around 170.49 ± 0.81 Ma, suggesting magmatic activity in the deposit spanned from the Late Triassic to the Middle Jurassic. (2) The monzogranites exhibited high silicon content (73.16–80.47 wt.%) and relatively low aluminum content (10.98–14.37 wt.%). They are enriched in alkalis (content: 3.42–10.10 wt.%) and deficient in magnesium and sodium, with aluminum saturation indices (A/CNK) ranging from 1.1 to 2.9. In addition, the monzogranites are enriched in large-ion lithophile elements (LILEs) such as Rb, K, and Ba and deficient in high-field-strength elements (HFSEs) like Nb, P, and Ti. (3) The monzogranites have low Zr + Nb + Ce + Y contents of (151.3–298.6 ppm) × 10−6 and 10,000 × Ga/Al ratios varying between 1.20 and 2.33, suggesting that they are characteristic of I-type granites. (4) Positive zircon εHf(t) values ranging from +0.3 to +7.6 in both rhyolitic porphyry and monzogranite samples, increasing with younger emplacement ages, imply that the deposit's rocks originated from magmatic mixing between mantle-derived mafic magmas and remelts of the juvenile crust. Considering these results and the regional geological evolution, this study proposes that the Wunugetu deposit was formed in an active continental margin setting and was influenced by the Late Triassic–Middle Jurassic southeastward subduction of the Mongol-Okhotsk Ocean. [ABSTRACT FROM AUTHOR]

The large Dongtangzi Zn-Pb deposit is located in the southwest of the Fengxian–Taibai (abbreviated as Fengtai) ore cluster in the west Qinling orogen. The origin of the deposit is controversial, positing diverse genesis mechanisms such as sedimentary-exhalative (SEDEX), sedimentary-reformed, and epigenetic-hydrothermal types. This study combines systematic ore geology observations with high-precision Rb-Sr and Sm-Nd ages of 211 Ma and in situ S-Pb isotopes to constrain the timing and origin of mineralization. In situ S-Pb isotopic studies show that the sulfide ores display a narrow range of δ34S values from 1.1‰ to 10.2‰, with 206Pb/204Pb, 207Pb/204Pb, and 208Pb/204Pb ratios of 18.07 to 18.27, 15.64 to 15.66, and 38.22 to 38.76, respectively. On the other hand, pyrites of the sedimentary period and the granite porphyry dike have δ34S values ranging from 15.8 to 21.4‰ and from 2.1 to 4.3‰ (with 206Pb/204Pb ratios of 18.09 to 18.10, 207Pb/204Pb ratios of 15.59 to 15.61, and 208Pb/204Pb ratios of 38.17 to 38.24), respectively. The above-mentioned S-Pb isotopic compositions indicate that the metallic materials involved in ore formation originated from a mixture of Triassic magmatic hydrothermal fluid and metamorphic basement. By integrating the regional geology, mineralization ages, and S-Pb isotopic studies, we propose that the Dongtangzi Zn-Pb deposit is the product of epigenetic hydrothermal fluid processes, driven by Late Triassic regional tectono-magmatic processes. [ABSTRACT FROM AUTHOR]

Shoshonitic rocks are widely distributed in post-collisional settings and provide key information on deep geodynamic mechanisms and magmatic evolution. In this paper, we present petrographic, zircon U-Pb age-related, trace elemental, Hf isotopic, bulk-rock elemental, and Sr-Nd isotopic data of the Dalongtan shoshonitic syenite porphyries (DSSPs) in central Yunnan, southeastern Tibet. The DSSPs formed at 33.2 ± 0.3 Ma in a post-collisional setting. They define linear trends on Harker diagrams, and they display similar trace element patterns and enriched bulk-rock Sr-Nd isotopes [(87Sr/86Sr)i = 0.70964–0.70968, εNd(t) = −12.9 to −12.7] and zircon Hf isotopes (εHf(t) = −15.7 to −13.1) to the coeval mantle-derived potassic mafic rocks. This suggests that the DSSPs were fractionated from the lithospheric mantle-derived mafic magmas. The DSSPs, along with the coeval felsic and mafic magmatic rocks (37.2–32.3 Ma), exhibit a planar distribution on the SE Tibet and predate the left-lateral shearing of the Ailaoshan–Red River shear zone (ARSZ) (32–22 Ma), suggesting that there are no genetic relationships between them. The DSSPs have geochemical characteristics similar to those of A-type granites, with high total alkalinity (10.39–11.17 wt.%), HFSE concentrations (Zr + Nb + Ce + Y = 890.2–1054.3 ppm), Ga/Al ratios (10,000 × Ga/Al = 2.95–3.46), whole-rock zircon saturation temperatures (906–947 °C), and oxygen fugacity (ΔFMQ = +3.30–+4.65), indicating that they are products of the high-temperature melting of the lithosphere as a result of asthenosphere upwelling in extensional settings. Based on our data and regional observations, it is proposed that the generation of the DSSPs may be linked to the convective thinning of the thickened lithospheric mantle following the India–Asia collision. [ABSTRACT FROM AUTHOR]

This article will place the rituals of the Greek Magical Papyri (PGM) for the acquisition of a supernatural assistant (paredros) into conversation with broader late antique debates surrounding the place of daimones within the celestial hierarchy. In considering the writings of Plotinus, Plutarch, Porphyry, and Iamblichus, it will survey points of contention surrounding questions of appropriate and inappropriate displays of ritual power, as facilitated by intermediary spirits who act as intercessors between humanity and the divine. Through analyzing the metaphysical underpinnings of the nature of the paredros, as variously articulated within the rituals for their conjuration within the Greek Magical Papyri, it will contextualize the aims of the ritualist against the backdrop of Iamblichus' theurgy in pursuit of mastery of—and intimate, transcendent communion with—the fundamental numinous nature of the world. In doing so, this article argues that Iamblichus' theurgy and the paredros rituals of the PGM ultimately grasp towards similar soteriological goals using different ritual methodologies; both seeking to elevate the incarnated body of the ritualist into a higher level of spiritual attainment through direct confrontation with the powers of nature. [ABSTRACT FROM AUTHOR]

The Shuangyuangou copper deposit is located in the southern segment of the Qinling orogenic belt in central China. The ore‐related intrusions include quartz diorite porphyry, granite porphyry and lamprophyre. In this study, we present whole‐rock geochemistry, zircon U–Pb geochronology, trace elements and Lu–Hf isotope data on the Shuangyuangou intrusions which provide critical constraints on the emplacement age, magma origin, petrogenesis and implications for porphyry Cu mineralization in this newly discovered deposit. Zircon U–Pb dating constrains the emplacement age of quartz diorite porphyry, lamprophyre and granite porphyry at 150–147 Ma. The quartz diorite porphyry and granite porphyry display high‐K calc–alkaline I‐type granite affiliation. The rocks show enrichment of LREE and LILE (Rb, Ba), depletion in HREE and HFSE (Nb, Ta, Ti) and absence of Eu anomaly. Zircon εHf(t) values of quartz diorite porphyry, lamprophyre and granite porphyry range from −7.5 to −1.7 with TDM2 ages of 1.3–1.6 Ga. Our data suggest that the parental magma was derived from partial melting of juvenile lower crust and metasomatic lithospheric mantle, with more involvement of mantle material for the lamprophyre. The zircon Eu/Eu* values of 0.55–0.78 suggest high magmatic water content which suppresses the fractionation of plagioclase. In addition, the ΔFMQ values calculated from zircon trace elements range from −0.90 to 2.96 which is a favourable factor for porphyry Cu mineralization at Shuangyuangou. The Late Jurassic Shuangyuangou intrusion and associated Cu mineralization were formed within an intracontinental setting after the collisional assembly of the Qinling orogenic belt. [ABSTRACT FROM AUTHOR]

The Eocene Yulong porphyry copper belt (YPCB) in eastern Tibet contains more than 10 Mt of Cu metal, associated with subvolcanic to volcanic porphyry systems intruding Cenozoic sedimentary basins. Geochemical data analysis shows that all samples belonged to high-K calc-alkaline and shoshonite series with metaluminous–peraluminous characteristics, light rare earth elements and large ion lithophile elements enrichment, high field strength elements depletion, and share geochemical similarities to adakitic rocks. We have established a spatiotemporal evolution framework through geochronological data analysis, combined with calculated bulk zirconium saturation temperature, calculated crustal thickness and geophysical evidence. We identified three magmatic processes triggered by asthenospheric upwelling and thermal erosion of thickened crust: (1) ultrapotassic magma derived from metasomatized mantle; (2) coeval ultrapotassic melt that promoted the partial melting of eroded lower crust and the generation of high-K adakitic felsic melt; high-K and Mg# adakitic fertile magma was formed by interaction between the eroded sulfide-rich juvenile lower crust-derived melt and mantle peridotite; (3) high-K adakitic fertile magma was derived from sulfide-rich juvenile lower crust, triggered by injecting hydrous ultrapotassic magma into thinned lower crust. The difference between deposit size in the north/south section of Yulong belt may be caused by the temperature of magmatic source and the volume of coeval potassic–ultrapotassic magmatism. Our analysis of the YPCB suggests that magmatism after 175 Ma within Intermontane arc complex of the Canadian Cordillera has high potential for porphyry deposits. [ABSTRACT FROM AUTHOR]

Volcaniclastic deposits are cynosures for reconstructing volcanic archives and evaluating the tectonic imprints of the study area. This paper presents an elaborate geological field litholog, petrography and geochemistry of ~1.2 km thick sequence of the quartz-feldspar porphyry (QFP) and rhyolites in the Kadiri–Hindupur section of the Kadiri Greenstone belt from Eastern Dharwar Craton (EDC). The QFP exhibits primary stratification; the thickness of the beds varies from very thin to thick (3–8 cm) and shows large-scale tabular cross-bedding in the lower half of the section. The bedding surfaces of QFPs are marked by current crescent-shaped marks (long axis: 5–25 cm, short axis: 2–8 cm), speculated as possible remnants of volcanic bombs and pyroclastic debris during the explosive volcanism. Petrographically, these QFPs are characterised by spectacular blue opalescent quartz grains with embayed grain boundaries, anhedral feldspar with sieved texture, fractured plagioclase and polycrystalline groundmass suggesting a volcaniclastic origin. They are also endowed with significant post-depositional textures such as domino-listric faulting and sigma-shaped porphyroblasts. Geochemically, QFPs are unaltered with trachyte-trachy dacite compositions showing high-potash, calc-alkaline nature displaying shoschonitic affinity. The primitive mantle normalised trace and rare earth elements are marked by an enriched LREE-LILE pattern coupled by negative zircon–hafnium, niobium–tantalum and titanium anomalies affirming their common genetic link to a prominent island arc–back-arc system where explosive volcanism produced the felsic crystal tuffs that were deposited and preserved as volcaniclastic QFP. The associated blocks and bombs produced the current crescent-shaped marks preserved on the bedding surfaces of QFPs. Research highlights: Research Highlights Quartz-feldspar porphyry (~1.2 km thick) occurs in the Kadiri Greenstone Belt, Eastern Dharwar Craton. Blue opalescent quartz and deformed plagioclase porphyry indicate volcaniclastic origin. Enigmatic current crescent-shaped marks represent remnants of volcanic bombs and pyroclastic debris. The primitive mantle normalised REE diagram is characterised by LREE-LILE enrichment. They represent Neoarchean pyroclastic volcanism and sedimentation in an island arc–back-arc setup. [ABSTRACT FROM AUTHOR]

Chlorite is present extensively in many types of deposits. The mechanism underlying the chemical variations in chlorite remains unclear. The Naruo porphyry deposit is a giant copper porphyry deposit in the Duolong ore district of Tibet. Chlorite, which is abundant in this deposit, has yet to be studied systematically; hence, we used principal component analysis (PCA) to assess the correlation between chlorite elements and various types of mineral deposits. We then conducted a preliminary investigation into its mineralogy and geochemistry to better understand its formation process and identify potential prospecting indicators. The PCA method proved effective in discerning two distinctive element signatures within the chlorite and categorising them into four deposit types: orogenic Au deposits, granite-type U deposits, and skarn-type Sn deposits that exhibit high FeOand low MgO distinguishing them from porphyry copper deposits. The chlorite in the Naruo deposit is classified as either early metasomatic (M-type), consisting mainly of clinochlore, or late hydrothermal (H-type), primarily consisting of clinochlore and chamosite. This classification suggests that H-type chlorite formed in a reductive environment conducive to Cu precipitation at medium temperatures (255°C-342°C). Al-Si and Fe-Mg substitutions were found to be the primary processes involved in its generation. Additionally, from the mineralisation centre outwards, there was an observed decrease in Si content as well as the Fe/(Fe+Mg) ratio in H-type chlorite, along with decreases in temperature, sulphur, and oxygen fugacity of allchlorites; conversely, increases were observed for Al content along with Mg and Mn elements in H-type chlorite. Chlorite is useful for exploring porphyry copper systems as an indicator mineral. [ABSTRACT FROM AUTHOR]

(The ancient tradition concerning Pythagoras of Samos’ role as the founder of physiognomy): This paper collects and analyzes ancient sources that refer to Pythagoras of Samos as the founder of physiognomy. Interest in physiognomy, which deals with the relationship between the body and the spirit, has become more popular over the last few years; however, many aspects of research into the topic are still obscure and worthy of further study. Physiognomy was assumed by ancient authors to be the method by which candidates were selected to enter the Pythagorean community, used by the Greek philosopher and his followers. Information about Pythagoras, who – by simply looking at somebody – could recognize their character appears, in the works of Aulus Gellius, Hippolytus, Porphyry, Iamblichos, Proclos and Olympiodorus. Apart from discussing testimonia about Pythagoras and his physiognomic examinations, the text explores the role of physiognomy during the selection process for the Pythagorean community in order to provide a better understanding of elite traditions within society. The paper also supplies further insight with regards to the methodology behind physiognomical surveys, which were popular during antiquity.

The Late Triassic igneous rocks associated with post-collision are widely distributed in the East Kunlun Orogenic Belt (EKOB), but their specific dynamic mechanism and evolutional process are still controversial. To address these key issues, we investigated the geochronology and geochemistry of intermediate–felsic igneous rocks from the EKOB, including trachyandesite, rhyolite, porphyritic monzogranite, syenogranite, granite porphyry and crystalline tuff. Zircon U–Pb isotopes of these rocks indicate that they were formed between 231.1 and 215.8 Ma (i.e. Late Triassic). These igneous rocks have moderate to high SiO2 (60.29–79.56 wt%) and low mantle compatible element contents (e.g. Co: 0.37–12.62 ppm; Ni: 1.55–15.59 ppm), suggesting that continental crustal-derived material played an important role in their formation. Porphyritic monzogranite (231.1 Ma), syenogranite (228.1 Ma), trachyandesite (227.4 Ma) and rhyolite (215.8 Ma) have Nb/U (1.41–4.71) and Ce/Pb (1.48–6.19) ratios like that of the crust, with εHf(t) values (–1.31 to 2.26) and old two-stage model (TDM2) ages of 1340–1119 Ma, suggesting that they originated from the partial melting of a Mesoproterozoic crust with minor mantle material involved in their source. Crystalline tuff (224.6 Ma) and granite porphyry (222.3 Ma) have Nb/U (1.93–3.81) and Ce/Pb (0.30–3.18) ratios, negative εHf(t) values (–7.04 to −5.12) and old TDM2 ages (1703–1581 Ma) closer to those of crust, suggesting that they were derived from the partial melting of a Paleo–Mesoproterozoic continental crust without addition of mantle material. Based on our new data and published data, the Late Triassic igneous rocks from the EKOB can be divided into three stages, 236–227, 226–218 and 216–208 Ma, corresponding to slab break-off, lithospheric mantle delamination and thickened lower crust delamination, respectively. The intermediate–felsic igneous rocks from the East Kunlun Orogenic Belt are dated from 231.1 to 215.8 Ma (i.e. Late Triassic). These igneous rocks were derived from the partial melting of ancient continental crust. The Late Triassic igneous rocks from the East Kunlun Orogenic Belt can be divided into three stages, including slab break-off, lithospheric mantle delamination and thickened lower crust delamination. [ABSTRACT FROM AUTHOR]

Hypatia of Alexandria was the most famous woman mathematician of antiquity, and her story is as relevant now as it was in her day. This play tells her story. While the events in the play are based closely on extant historical texts, inspiring excerpts from classical works by Porphyry, Plotinus, Aristotle and Plato are woven into the action to further the plot and add to the classical mood. Dance and music, including an Homeric hymn, add to the artistic texture. [ABSTRACT FROM AUTHOR]

The Pulang copper deposit, formed in the Late Triassic, is the largest porphyry Cu-Mo-Au deposit in the eastern Tethys, and its genetic type and mineralization potential have received widespread attention. Identifying the characteristics of ore-forming fluids and the sources of ore-forming materials in the deep and peripheral ore bodies of Pulang is particularly important for constructing a complete porphyry copper mineralization system. Based on detailed core logging and geological observations, this article provides extensive petrographic, fluid inclusion micro-thermometry, laser Raman spectroscopy, and H-O-S isotope data on the veins of the main mineralization stage (B veins) in the first mining area and eastern ore section of the Pulang porphyry copper deposit. The genetic correlation between the eastern ore section and the first mining area is clarified, and their mineralization potential is inferred. The results indicate that the deep vein bodies in the first mining area exhibit multi-stage characteristics, and the fluid in B veins exhibits both high-temperature and salinity characteristics. The magma-derived early ore-forming fluids underwent processes such as boiling and experienced immiscibility during meteoric water mixing, which could be the primary mechanism of the precipitation of Cu, Mo, Au, and other metals. The outer eastern ore section is located in a medium-to-low-temperature hydrothermal mineralization zone far from the mineralization center. This outer eastern ore section is a distant part of the magmatic–hydrothermal system of the first mining area. [ABSTRACT FROM AUTHOR]

Prospecting for and exploiting buried mineral deposits is currently challenging. Given their high precision and resolution, reflection seismic methods might be useful in such applications involving deep mineral deposits. However, there are few open seismic datasets available from mineral deposit exploration, especially in hardrock environments. The world‐class Caosiyao porphyry Molybdenum deposit (1.76 Mt) in the Jining area of Inner Mongolia, China, is largely covered by loess layers, which poses challenges to its exploration. Seismic reflection surveys were conducted to help delineate the deep granite porphyry intrusions and associated orebodies. This paper presents the raw seismic reflection dataset from three profiles on the Caosiyao deposit area, which can be used as a standard dataset for reflection seismic processing in shallow coverage and hardrock areas. Situated at the juxtaposition of the Khondalite Belt and the Trans‐North China Orogen in the northern North China Craton, the Jining region hosts considerable known porphyry Mo deposits. As such, this open dataset can assist in research on deep geological structures and hence increase prospecting efficiency in geologically similar areas. [ABSTRACT FROM AUTHOR]

The genetic link between subduction- and collision-related porphyry Cu deposits (PCD) is still not well understood. The Gangdese porphyry Cu belt (GPCB) in southern Tibet hosts two parallel E–W-oriented metallogenic subbelts, including a southern Jurassic subduction-related and a northern Miocene post-collision PCD subbelt. In this study, we combine new and published whole-rock major and trace element data, Cu isotopic compositions and zircon trace element data of Jurassic magmatic rocks from the GPCB. Combined Sr/Y and La/Yb crustal thickness proxies confirm the south to north geometry of the Jurassic arc-back-arc system across the GPCB. The southern Jurassic magmatic arc rocks have systematically higher whole-rock V/Yb ratios, δ65Cu values and zircon Eu/Eu* ratios compared to those of the northern back-arc region. This suggests that Jurassic southern arc magmas had higher oxygen fugacity and H2O concentration than the contemporaneous northern back-arc magmas, which was controlled by a steep subduction geometry of the Neo-Tethyan oceanic slab. Hydrous and oxidized magmas resulted in Cu enrichment during magma evolution and generation of Jurassic PCD in the southern magmatic arc by inhibiting early sulfide saturation at deep crustal levels. In contrast, the northern back-arc magmas were less oxidized and less hydrous, which triggered early sulfide saturation, resulting in segregation of Cu-bearing sulfides in lower crustal cumulates that provided a favorable metal source for later Miocene PCD in the northern subbelt. Our study indicates that the Jurassic subduction geometry controlled the formation and distribution of Jurassic subduction-related and Miocene post-collision-related PCD in the GPCB. [ABSTRACT FROM AUTHOR]

The Mineral Prospectivity Map (MPM) is a powerful tool for identifying target areas for the exploration of undiscovered mineral deposits. In this study, a knowledge-driven Index overlay technique was utilized to create the MPM on a regional scale. The complex distribution patterns of geological features associated with mineral deposits were mapped and correlations between these features and mineral deposits were revealed by integrating geological, geophysical, hydrothermal alteration, and fault density data layers. It was found that 23% of the study area was highly prospective, with 77% of the known porphyry copper occurrences located within this area. The normalized density was equal to 3.35, indicating a significant relationship between the known porphyry copper occurrences and their occupied area. The MPM also identified potential tracts outside the known mineralized areas that can be used for exploration and quantitative assessment of undiscovered resources. It is suggested that the MPM is a valuable tool for mineral exploration and could have significant implications for the mining industry. [ABSTRACT FROM AUTHOR]

In mineral exploration programs, reducing uncertainty and increasing exploration success have always been challenging issues. To modulate the above-mentioned uncertainty and increase exploration accomplishment, integration, and prospectivity analysis techniques are used for mineral exploration targeting. This paper aims to model the mineral potential of porphyry copper deposits in the Jiroft region, Kerman province. To achieve this goal and overcome the aforementioned issues resulting from the operation of complex ore-forming geological processes, continuous weighting methods through logistic functions were used while training points and analyst's opinions were not contributed to the weighting procedure. Then, to generate exploration targets, the weighted layers were combined with three different integration methods namely, artificial neural network, geometric average, and fuzzy gamma operators. The comparison of the model obtained from the application of an artificial neural network with those obtained by the geometric average and the fuzzy gamma operators using prediction rate-area plots indicated that all the models have good overall performance and acceptable prediction rate. However, the performance of the artificial neural network model is slightly less than that of the other two models. Thus, the targets generated using the geometric average and fuzzy gamma operators are more reliable for planning further exploration programs. [ABSTRACT FROM AUTHOR]

Delineating and mapping alteration zones in porphyry copper exploration is of special importance. In this study, satellite image processing techniques were employed to highlight alteration zones in the Zafarghand exploration area. The Zafarghand area is located in the southeastern part of Ardestan and the northwestern part of Isfahan. It is situated within the geological structural zones of central Iran and the intermediate magmatic arc of Urmia-Dokhtar. Various alteration haloes are present in this area, including phyllic, potassic, propylitic, argillic, and slightly siliceous alterations. In this study, the detection of related alterations was carried out using ASTER sensor imagery. Accordingly, considering the raster nature and digital form of satellite images, the digital number values of each pixel from the image matrices were considered as samples in a systematic network. Finally, the U spatial statistic algorithm was implemented as a moving window algorithm for determining anomaly samples in the set of digital number (DN) values of ASTER satellite image pixels. The results of this technique show that the application of the U-statistic method, considering its structural nature and neighboring samples in decision-making, has been successful and has proven to be very effective in determining the alteration zones in the Zafarghand area. It could be observed the delineated propylitic alteration by the U-statistic method is closely associated with the defined zone of propylitic alteration, which is also consistent with the field and microscopic observation of the porphyry Cu mineralization in this alteration zone. It is also observed that the determined phyllic alteration by this image processing is spatially conformable with the sericitic alteration presented in the alteration map (based on field observations and geochemical sampling). [ABSTRACT FROM AUTHOR]

This research presents a case study that employs the Fuzzy Ordered Weighted Averaging (FOWA) method to develop mineral prospectivity/potential maps (MPM) for the Chahargonbad district in southeastern Iran. The primary objective of the study is to uncover intricate and concealed relationships between various evidence layers and known ore occurrences through a comprehensive analysis of multidisciplinary geospatial data. Consequently, thirteen evidence layers were meticulously derived from existing databases, encompassing geological, geochemical, geophysical, and remote sensing data, which were then integrated using the FOWA multi-criteria decision-making approach to delineate favorable zones for porphyry Cu mineralization. The FOWA methodology employs a diverse array of decision strategies to synthesize input geospatial evidence by incorporating multiple values for an alpha parameter. This parameter serves as the cornerstone of the algorithm, influencing experts' perspectives on MPM risk. The methodology generates seven mineral potential maps to identify the most suitable one(s). By considering a prediction-area plot for datadriven weight assignment to each evidence map, the hybrid FOWA outputs were scrutinized to pinpoint the most appropriate map for targeting significant Cu occurrences. The resulting synthesized evidence map indicates an ore prediction rate of 77%, with known Cu deposits primarily located within favorable zones occupying 23% of the entire district area. [ABSTRACT FROM AUTHOR]

Identification of geochemical anomalies is a critical task in mineral exploration targeting. Decades of research and technology have resulted in new algorithms and techniques for recognizing anomaly detection methods at various scales and sample media. However, algorithms cannot always reveal the true nature of geological processes. The mineral system concept may contribute to a better understanding of the geological processes required to form and preserve ore deposits at all spatial and temporal scales. The mineral systems concept investigates the geochemical processes occurring within mineral subsystems in soil samples from the porphyry prospect area. The Cu/(Al + Ca) index was used to compare Cu, Mo, and (Pb* Zn)/(Cu*Mo) to highlight the region of interest for mineral potential mapping and pioneer borehole drilling based on fluid-rock interaction and secondary processes (e.g., alteration, weathering, and leaching). Exploratory boreholes validate a better performing Cu/(Al + Ca) index for detecting and refining soil geochemical anomalies. [ABSTRACT FROM AUTHOR]

The Clarke River Fault in northeast Queensland records an early Paleozoic history of subduction, accretion and continental suturing. Samples of mafic-ultramafic rocks collected proximal to the Clarke River Fault record oceanic geochemical affinities and comprise alteration assemblages consistent with an ophiolitic origin. The ca 456Ma Falls Creek Tonalite records a continental-arc geochemical signature and was formed in response to long-lived subduction beneath the Thomson Orogen. Ordovician subduction beneath the Thomson Orogen is broadly coeval with arc magmatism documented in the Lachlan Orogen, which has been associated with the formation of several large porphyry ore deposits. The Falls Creek Tonalite yields adakite-like geochemical signatures that reflect a fertile melt source conducive to the formation of porphyry ore deposits. The outcropping plutons record ductile deformation consistent with mid-crustal depths, and they were emplaced during late syntectonic activity. This implies that the Falls Creek Tonalite was emplaced at too great a depth to have formed porphyry ore deposits. The northern Charters Towers Province shares many geological similarities to the Greenvale Province, where the erosional level may be shallower, and the potential for porphyry deposit formation and preservation may be greater. [ABSTRACT FROM AUTHOR]

The Yidun Terrane hosts huge amounts of Late Triassic granitic plutons. While the southern Yidun Terrane, also referred to as the Zhongdian arc, mainly includes Late Triassic porphyry and related porphyry Cu-Au deposits, rare mineralization was found related to the contemporary granitic batholiths in the northern Yidun terrane (NYT). This paper has explored the chemical compositions of the apatite from these intrusions, which provide insights into the petrogenesis and the mineralization potential. The higher Mg and V concentrations and La/Sm ratios of the Zhongdian apatite than the Cuojiaoma and Daocheng apatite in the NYT suggestes that the Zhongdian porphyries were derived from a mixed source with both mantle and crustal contributions, while the Cuojiaoma and Daocheng granites are dominantly crustal derived. Compared with the Cuojiaoma and Daocheng apatite, the Zhongdian apatite are characterized by higher Sr, Eu/Eu* [EuN/(SmN×GdN)0.5], S and Cl, and low Mn and Y concentrations with adakitic affinity, indicating an environment with high oxygen fugacity and S and Cl contents for their parental magmas, which is favorable for the formation of porphyry Cu-Au deposits. By comparing the chemical characteristics of apatite from the ore-bearing porphyries and ore-barren granites in the Yidun Terrane, this study proposes that the apatite from the ore-bearing rocks commonly has relatively high Sr, S and Fe concentrations and low Mn, Y and Si/S ratio. These geochemical characteristics can be good indicators for predicting the metallogenic potential of the rocks. [ABSTRACT FROM AUTHOR]

This paper presents new petrogeochemical data concerning rocks sampled on the Outer Islands in the Gulf of Finland. Earlier, quartz porphyries on Hogland Island were regarded as the standard for volcanic comagmates of rapakivi granites in the Wyborg massif. Sommers Island was found to contain two effusive rock sequences. The "southern" sequence is composed of quartz porphyries whose isotopic age is 1.66 Ga, so they can be regarded as the earliest manifestations of Riphean magmatic activity in the area. The "northern" rock sequence contains, apart from quartz porphyries, also trachybasalts, basaltic andesites, and dacites; the sequence has an isotopic age is 1.59‒1.57 Ga, which is inconsistent with the figures for the adjacent Wyborg massif (1.65‒1.63 Ga). For this reason, in spite of the fact that quartz porphyries and rapakive granites have similar compositions, the volcanics did not result from differentiation of the magma that has produced the granites, but were formed independently of these from a source of the same type which however was in a slightly different structural setting that allowed their free supply onto the ground surface. [ABSTRACT FROM AUTHOR]

The Dasuji giant porphyry molybdenum deposit is one of the largest ore deposits recently discovered along the Yinshan–Yanshan–Liaoning molybdenum belt in China. Using this deposit along the Yinshan–Yanshan–Liaoning molybdenum belt as the study area, the present study proposed a two-stage approach aimed at marking out the hydrothermally altered anomalies in the study area for the guidance of future prospecting in other regions. First of all, the Principal Component Analysis (PCA) and specific Band Ratio methods were applied to the ASTER images from different acquisition dates to extract ferric oxides and hydroxyl alterations related to the porphyry molybdenum deposit. Then, the Fractal-Aided Anomaly-Overlaying Selection model was adopted to recognize two ferric and hydroxyl alteration layers for separating anomalies from the interferences caused by geology and random noise from the data. Furthermore, for lithological differentiation in the previously marked off area, the Random Forest Classifier (RFC) was applied to the composite data obtained via the ASTER, ETM, and DEM, and it is demonstrated that the DEM can significantly improve lithological mapping in areas with complex vegetation cover and topography. Based on field verification and comparison with geological maps, the research revealed that the suggested two-stage approach may effectively reduce erroneously recognized anomalies produced during the first stage while retaining ore-related anomalies for gigantic porphyry molybdenum deposit prospecting in the Dasuji area, which showed the good application potential of the proposed model to extract actual hydrothermally altered anomalies adopted for lithological discrimination and mapping. [ABSTRACT FROM AUTHOR]

Volatile saturation influences the physicochemical behavior of magmas and is essential for the sequestration of metals in porphyry copper deposits. Tracking the evolution of volatile components (F, Cl, H2O, S) in arc systems is complicated by their mobility and tendency to rapidly re-equilibrate with late-stage melts. We demonstrate that accurate measurements of volatile concentrations in apatite offer a reliable method for identifying the occurrence of volatile saturation. Fluorine, Cl, S, and calculated OH concentrations in apatite obtained by scanning electron microscope-energy-dispersive X-ray spectroscopy and electron microprobe analysis were used to compare two end-member volcanic systems in the West Luzon Arc (Philippines): Pinatubo (a fluid-saturated analogue for porphyry copper deposits) and Taal (a barren and fluid-undersaturated comparator). Apatites from Pinatubo are S-rich (0.04-0.64 wt%) and show a progressive decrease in XCl/XOH (0.6-0.25) and an increase in XF/XCl (1.5-8) and XF/XOH (0.75-1.2) during crystallization. Modeling indicates that these changes result from efficient partitioning of Cl into a continuously saturated H2O-rich fluid, while high regions of S in apatite reflect episodic flushing by a separate S-rich flux. Little S is evident in apatites from Taal (<300 ppm), which show increasing XCl/XOH and XF/XOH together with constant XF/XCl during crystallization. This cannot be explained using an H2O-saturated model, and instead reflects fluid-undersaturated crystallization and cooling in a reduced and/or S-depleted system. Measured volatiles in apatite therefore effectively discriminate volatile-saturated and undersaturated magmatic systems, providing an important 'fertility' filter for porphyry exploration. [ABSTRACT FROM AUTHOR]

The current debate on volcanic-plutonic connection is centered on whether eficient liquid-crystal segregation dominates the evolution of a mushy reservoir to produce evolved, crystal-poor rhyolite and cumulate leftover. However, magma recharge may remarkably influence the evolution of a mushy reservoir and obscure the evidence of liquid-crystal segregation. This complexity poses a challenge to exploring the connection of volcanic-plutonic rocks. This study investigates the Qinzhou Bay granitic complex (~250–248 Ma) from South China, which contains crystal-poor (<19 vol%) peraluminous rhyolites and subsequent crystal-rich (28–54 vol%) porphyries. Although the rhyolite and porphyry units have a close spatio-temporal link, they do not share a fractionation trend and similar whole-rock Sr-Nd-O isotopic compositions; thus, a direct connection is not evidenced. We further present textural analyses, mineral and melt inclusion compositions, thermobarometry (the combination of Ti-in-zircon thermometer and Ti-in-quartz thermobarometer), and thermodynamic modeling to examine the alternative interpretations, i.e., the two units may have intrinsically independent origins or the connection of the two units has been obscured. For the rhyolite unit, thermobarometric results reveal a polybaric storage system consisting of middle (>600 ± 80 MPa) and upper (~150 ± 40 and ~60 ± 20 MPa) crustal reservoirs. Variations in quartz Fe content and chlorine-rich, metaluminous melt inclusions suggest that magma hybridization with less-evolved metaluminous magmas occurred at both crustal levels. In particular, the elevated Fe contents in the quartz population that crystallized at the shallowest level (~60 ± 20 MPa) suggest that recharge magmas were directly injected into the shallowest reservoir. Deviation of the whole-rock composition from the liquid evolution trend recorded in melt inclusions suggests a combined efect of magma mixing and crystal-melt segregation processes in upper crustal reservoirs. Thermodynamic modeling and mass balance calculations suggest that the whole-rock composition of the rhyolite could be reproduced by mixing between regionally exposed dacites and segregated melts at crystallinities of 50–60% (using parental magma represented by the least-evolved melt inclusion). For the porphyry unit, thermobarometric results reveal magma storage at middle (more than 450 ± 40 to 550 ± 40 MPa) and upper (110 ± 20 to 140 ± 20 MPa) crustal levels. The small-scale oscillatory zonation of plagioclase, the pervasive resorption of quartz and alkali feldspar, and the presence of peraluminous microgranular enclaves in the porphyries suggest a recharge event of metasediment-sourced magmas, triggering reactivation and convection of the reservoir. Autoclastic and overgrowth textures of quartz, plagioclase, and alkali feldspar phenocrysts and development of columnar jointing suggest that the reactivated porphyritic magmas ascended and emplaced at ultrashallow levels (~30 ± 10 MPa). Because of the similar storage pressures, the porphyries may represent remobilized cumulates of rhyolitic magmas, whereas the texture and geochemistry of the cumulate-liquid pair were modified, a key factor rendering a cryptic connection between the rhyolite and porphyry. Alternatively, the plumbing systems feeding the rhyolite and porphyry units are horizontally independent or vertically discrete, but this circumstance is inconsistent with the same evolution trend of quartz Fe and Al contents of the rhyolite and porphyry. Our study highlights that whole-rock composition may record blended information of complex processes, and caution should be taken when whole-rock composition is used to extract information of a single process. Multi-method constraints are required to evaluate the influence of recharge processes on the modification of liquid-cumulate records, and big data analysis on the basis of geochemistry should be conducted with caution to avoid biased understanding. [ABSTRACT FROM AUTHOR]

According to a fragment of Porphyry (410 F Smith = 80 B 2 DK), containing a dialogue on the theme of plagiarism, Plato made use of the same arguments as Protagoras' Περὶ τοῦ ὄντος against monistic thinkers, most likely the Eleatics. My paper aims to analyse Porphyry's testimony to assess some aspects of Protagoras' reflection on being through a comparison with parallel sources, in particular Plato's dialogues (Theaetetus, Euthydemus, Sophist, Parmenides). I conclude that it is plausible to suppose that, within the framework of a more general reflection on ὀρθοέπεια, Protagoras viewed the notion of being in Περὶ τοῦ ὄντος from a linguistic perspective. [ABSTRACT FROM AUTHOR]

In this paper I focus on the relationships between language, definition and being in Antisthenes. I start from Plato's Sophist 251b–c, in which the reference to the ὀψιμαθεῖς stands out, and I conclude that it is not possible to identify these characters with Antisthenes. The conception of ὀψιμαθεῖς provides for the exclusive legitimacy of identical judgments, exploiting in an eristic sense an evident Eleatic legacy. But this position, rather than concordances, reveals serious opposition to what is surely known to us of the logical and linguistic doctrines of Antisthenes. The most explicit testimony about the relationship between language and being in Antisthenes is handed down by Porphyry, who attributes to Antisthenes the equation λέγειν = λέγειν τι = λέγειν τὸ ὄν. My analysis intends to show that this equation is assumed by Antisthenes through a Socratic mediation and has a double objective: to ensure an objective reference of language, as opposed to Gorgias' self-referential conception of language, and to nullify the antilogy, which is typical of sophistic argumentation. To it Antisthenes contrasts the ἐπίσκεψις τῶν ὀνομάτων, which is a development of Socratic ἐξετάζειν, and whose aim is to reach, at the end of the examination, no longer just a ὁμολογία, but a definition valid once and for all. Antisthenes is aware that there is a distinction between essence and quality, and with this, he moves a first important step beyond the univocal conception of being proper to Parmenides. The doxography will sum up Antisthenes' position by describing him as the first philosopher to advance a definition of logos, i. e., definition. He bases his theory of definition on the identification of that attribute which is ἴδιον καὶ οἰκεῖον of the proposed object. Antisthenes coined the phrase τὸ τί ἦν to designate what the predicate is meant to say in a definition, i. e., the proper quality. This expression does not seem to identify the general notion of a predicate as such, but rather to indicate the determination or qualification necessary to actually define the object in question. In the final part of my article, I examine some testimonies that show how, with his theory of definition, Antisthenes is, and was considered already in antiquity, the precursor of the Stoic theory of definition, whose objective is, according to Chrysippus' formula, to provide the explanation of what is proper (ἰδίου ἀπόδοσις). [ABSTRACT FROM AUTHOR]

This paper offers a reconstruction of Xenocrates' theory of indivisibles which would not commit him to the idea of 'jerky motion' criticized by Aristotle in Physica VI, yet would perfectly square with Plato's Timaeus, the basis of Xenocrates' canon. Relying on Alexander's, Porphyry's, and Themistius's accounts of his theory, as well on a detailed analysis of De lineis insecabilibus, I suggest that Xenocrates' minima, contrary to what Aristotle implies, are not to be understood as more or less stable particulars, like tiny chunks of matter, moving about or leaping in physical space from point A to point B. Yet Xenocrates' minima do remain 'physical' and 'corporeal' in a more Platonic sense of these words, not presupposing any kind of leaping, jumping, or jerking. This explains why Xenocrates associated the sensible realm with one of the three Fates, namely Clotho. [ABSTRACT FROM AUTHOR]

The text presented aims to illustrate the thesis of E. Gilson derived from his work “The Unity of Philosophical Experience” on the impersonal necessity linking philosophical ideas, as exemplified by Porphyry and his work Sententiae ad intelligibilia ducentes. E. Gilson puts forward a thesis that the philosopher is free at the moment of choosing the first principles of their philosophy, then they must accept the consequences that necessarily follow from these principles. Porphyry’s Sentences are a fairly synthetic account of Plotinus’ metaphysics and allow for a quite clear grasp of both the starting point and the above-mentioned consequences. In addition, for contrast, the paper presents the position of Alexander of Aphrodisias, similar in several points to that taken by Porphyry, but ultimately completely different.

The subduction-related Sunda-Banda arc hosts several giant and major Cu–Au–Mo porphyry and epithermal Au systems, making it one of the most important magmatic-related metallogenic belts in Indonesia. They are accompanied by a number of smaller systems, one of which is the recently discovered Randu-Kuning porphyry Cu-Au deposit on Java Island. The present study investigates the geochemical characteristics of this deposit through whole-rock and mineral geochemistry and mineral geothermobarometry, focusing on three sequential dioritic intrusions that make up the host igneous complex, two barren and the third mineralized. Moreover, a comparative analysis is performed between other porphyry deposits in the Sunda-Banda arc and with Grasberg in Papua. This study shows that the older porphyry deposits have mostly similar geochemical characteristics to the younger deposits, suggesting the same magma source, which is mantle-derived oxidized I-type magma. Amphibole geothermobarometry shows that the formation of syn-ore intrusion in the older porphyry was higher in temperature and pressure than those at the younger porphyry. The halogen and oxygen fugacities inferred from biotite and amphibole chemistry indicate an oxidized, water- and halogen-rich melt. Our study shows that combining amphibole and biotite chemistry and whole-rock geochemical data is useful to fingerprint the magmatic-hydrothermal processes, especially where multiple magmatic phases occur. This research also provides valuable insights into the magmatic-hydrothermal physiochemical conditions during the formation of the mineralized system. [ABSTRACT FROM AUTHOR]

The research interest for many authors has been focused on the origin, recovery, and exploration of critical metals, including platinum-group elements (PGEs), with the aim of finding new potential sources. Many giant porphyry Cu deposits are well known around the Pacific Rim, in the Balkan–Carpathian system, Himalayas, China, and Malaysia. However, only certain porphyry Cu-Au deposits are characterized by the presence of significant Pd and Pt contents (up to 20 ppm). This contribution provides new analytical data on porphyry-Cu-Au±Pd±Pt deposits from the Chalkidiki Peninsula and an overview of the existing geochemical characteristics of selected porphyry-Cu deposits worldwide in order to define significant differences between PGE-fertile and PGE-poor porphyry-Cu intrusions. The larger Mg, Cr, Ni, Co, and Re contents and smaller LILE elements (Ba and Sr) in fertile porphyry-Cu-Au-(PGE) reflect the larger contribution from the mantle to the parent magmas. In contrast, the smaller Mg, Cr, Ni, Co, and Re contents and larger Ba and Sr in PGE-poor porphyry-Cu-Mo deposits from the Chalkidiki Peninsula (Vathi, Pontokerasia, and Gerakario) and Russia–Mongolia suggest the presence of parent magmas with a more crustal contribution. Although there is an overlap in the plots of those elements, probably due to the evolution of the ore-forming system, consideration of the maximum contents of Mg, Cr, Ni, and Co is proposed. Magnetite which separated from the mineralized Skouries porphyry of Greece showed small negative Eu anomalies (Eu/Eu* ≥ 0.55), reflecting a relatively high oxidation state during the cooling of the ore-forming system. The relatively high, up to 6 ppm (Pd+Pt), and low Cr content towards the transition from the porphyry to epithermal environment, coupled with the occurrence of Pd, Te, and Se minerals (merenskyite, clausthalite), and tetrahedrite–tennantite in fertile porphyry Cu deposits (Elatsite deposit, Bulgaria), reflect a highly fractionated ore-forming system. Thus, in addition to the crustal and mantle recycling, metasomatism, high oxidation state, and abundant magmatic water, other factors required for the origin of fertile porphyry-Cu deposits are the critical degree of mantle melting to release Pt and Pd in the ore-forming fluids and the degree of fractionation, as reflected in the mineral chemistry and geochemical data. [ABSTRACT FROM AUTHOR]

Highly fractionated granites are widely distributed in the crust and provide unique windows into magmatic evolution. This study reports petrography, zircon U–Pb ages, trace elemental, and Hf isotopic, as well as whole-rock elemental and Nd isotopic data of highly fractionated granite porphyries from the Shiguanshan area in western Yunnan, southeastern Tibet. The granite porphyries were formed at 34.0 ± 0.3 Ma in a post-collisional setting. They are strongly peraluminous (A/CNK = 1.95–2.80), have high SiO2 content (SiO2 = 78.16–79.13 wt.%) and zircon saturation temperatures (803–829 °C, average 819 °C), and low MgO, with pronounced enrichment in Pb, U, Th, and Rb, and depletion in Ti, Eu, P, Sr, and Ba, and belong to highly fractionated A-type granites. These rocks define linear trends on Harker diagrams and display similar enriched whole-rock Nd isotopic (εNd(t) = −12.8 to −12.3) and zircon Hf isotopic (εHf(t) = −10.4 to −8.8) compositions compared to the published data of coeval mantle-derived syenite porphyries, which can be attributed to fractional crystallization processes. A quantitative model suggests that the Shiguanshan granite porphyries likely formed through the fractionation process of a mineral assemblage consisting of plagioclase, K-feldspar, biotite, and amphibole (in a ratio of 40:30:25:5), with fractionation degrees of 50%–55%. The magmatic textures and zircons, decoupling between the REE tetrad effect and fractionation of twin-elements, along with the modeling result of Rayleigh fractionation, suggest that the REE tetrad effect in the Shiguanshan granite porphyries may be caused by fractionation of accessory minerals. Our data, along with regional observations, propose that the generation of these granite porphyries is possibly related to lithospheric removal following the Indo–Asia collision. [ABSTRACT FROM AUTHOR]

The southern margin of the North China Craton (SNCC) contains 8 giant (> 0.5 Mt Mo resources), 4 large (0.1–0.5 Mt Mo resources) and many small (< 0.1 Mt Mo resources) porphyry Mo deposits. Their magmatism ages are concentrated within 150–131 Ma, but it is unclear what determines the size of porphyry Mo systems. Herein, we synthesize new and existing data for the Mo-bearing intrusions in the SNCC to investigate the optimal conditions for giant deposit formation. These intrusions share similar whole-rock geochemistry characteristics and highly differentiated features, with SiO2 and K2O contents ranging from 68.55 to 79.13 wt.% and 2.63 to 11.18 wt.%, respectively. They share similar lower crustal sources with a variable input of mantle materials. Their εNd(t) and εHf(t) values range from -19.1 to -12.7 and -29.5 to -9.3, respectively, and indicate no relationship with metal fertility. The similar ΔFMQ values calculated from zircon geochemistry also suggest that the porphyry Mo deposit size is unrelated to magma redox conditions. High magmatic water contents and high differentiation features (SiO2 > 73 wt.%) exhibit significant positive correlations with the deposit size. Therefore, we propose that magma with a high water content triggered by intensive fractional crystallization is the fundamental requirement to produce large Mo endowment in the SNCC. This conclusion is consistent with the criteria that pulsed release of mineralizing fluids from a large magma chamber through fractional crystallization play an important role in the formation of giant porphyry Mo deposits in other molybdenum belts in the world. [ABSTRACT FROM AUTHOR]