Search

Three dimensional meta surface lens is proposed to improve the gain and beam shaping of horn antenna. Hence an array of SRR as a meta surface lens has been designed, fabricated and investigated. This meta surface lens can be used to convert the spherical wave to plane wave for a wide range of frequency. It is proved by permeability and permittivity of meta surface. In this work the operating bandwidth of the proposed antenna is in the range of 9GHz to 11GHz for satellite application. The radiation pattern of E and H plane is sharpened in this work. The antenna 3dB beam width, and front to back ratio were 9.2, 28dB at 10GHz. The radiation characteristics of horn antenna with meta surface have been studied numerically and confirmed experimentally, showing an average gain improvement of ~3dB with respect to horn antenna without meta surface lens.

Soil erosion, considered a major environmental and social problem, leads to the loss of soil nutrients and the degradation of soil structure and impacts plant growth. However, data on the effects of land use changes caused by vegetation restoration on soil nutrients and erodibility for different slope aspects are limited. This study was conducted to detect the response of soil nutrients and erodibility to slope aspect in a typical watershed in the northern agro-pastoral ecotone in China. The following indexes were used to determine the improvement in soil nutrients and erodibility through a weighted summation method: the comprehensive soil nutrient index and the comprehensive soil erodibility index. The results showed that the vegetation types with the highest comprehensive soil quality index (CSQI) values on western, northern, southern, and eastern slopes were Pinus sylvestris and Astragalus melilotoides (1.45), Caragana korshinskii and Capillipedium parviflorum (2.35), Astragalus melilotoides (4.78), and Caragana korshinskii and Lespedeza bicolor (5.00), respectively. Slope aspect had a significant effect on understory vegetation characteristics, soil nutrients, and soil erodibility. Understory vegetation and soil characteristics explained 50.86 %–74.56 % of the total variance in soil nutrients and the erodibility. Mean weight diameter and total phosphorus were the main factors that affected the CSQI for different slope aspects. Our study suggests that the combinations of species, such as C. korshinskii and L. bicolor, were the optimal selection to improve soil nutrients and soil erodibility for any slope aspect.

Fungal infections often disproportionately affect males over females. Since the NIH mandated in 2016 that researchers test their hypotheses in both biological sexes, numerous other fungal infections/colonizations have been found to exhibit sex-specific patterns. These patterns have been observed in various species, including mice, drosophila, cats, and bats, suggesting significant implications for understanding these diseases and developing treatments. Despite the recognition of this sex bias, primary research explaining its underlying causes or mechanisms remains limited. Current evidence suggests that potential causes might be linked to sex hormones, genetic expression, and evolutionary behaviors. This review consolidates recent data on sex bias in fungal infections or colonizations among different species and proposes future research directions to address existing gaps. Thus, this review advances the comprehension of the intricate relationships between biological sex, fungal infections, and broader health implications.

We noticed that Figure 1 in the original publication [...]

Orthodontic therapy is becoming a mainstay for the correction of esthetic and functional disturbances in both young and older adults. Orthodontic forces act on the periodontium and can have wide-ranging effects, from beneficial to harmful, from being a hindrance to oral hygiene maintenance to causing irreversible periodontal breakdown. In some patients, the presence of periodontal conditions like gingival recession, before start of orthodontic therapy, raises many questions. Much controversy and confusion exist regarding the need for periodontal therapy, its sequencing, especially in case of recession in a young patient who needs orthodontic therapy. An interactive, interdisciplinary approach is essential in such cases for success. This case report illustrates the interdisciplinary management of a young patient with gingival recession with an eight-year follow-up of the case.

The demand for high-intensity lasers has grown ever since the invention of lasers in 1960, owing to their applications in the fields of inertial confinement fusion, plasma-based relativistic particle accelerators, complex X-ray and gamma-ray sources, and laboratory astrophysics. To create such high-intensity lasers, free-running lasers were either Q-switched or mode-locked to increase the peak power to the gigawatt range. Later, chirped pulse amplification was developed, allowing the generation of peak power up to 1012 W. However, the next generation of high-intensity lasers might not be able to be driven by the solid-state technology alone as they are already operating close to their damage thresholds. In this scenario, concepts of amplification based on plasmas has the potential to revolutionize the laser industry, as plasma is already a broken-down medium, and hence does not pose any problems related to the damage thresholds. On the other hand, there are many other aspects that need to be addressed before developing technologies based on plasma-based amplification, and they are being investigated via theoretical and numerical methods and supported by several experiments. In this report, we review the prospects of employing plasma as the medium of amplification by utilising stimulated scattering techniques, such as the stimulated Raman scattering (SRS) and stimulated Brillouin scattering (SBS) techniques, to modulate high-power laser pulses, which would possibly be the key to the next generation of high-power lasers. The 1980s saw the commencement of research in this field, and possibilities of obtaining high peak powers were verified theoretically with the help of numerical calculations and simulations. The extent of amplification by these stimulated scattering schemes are limited by a number of instabilities such as forward Raman scattering (FRS), filamentation, etc., and here, magnetised plasma played an important role in counteracting these parasitic effects. The current research combines all these factors to experimentally realise a large-scale plasma-based amplifier, which can impact the high-energy laser industry in the near future.

Sun-as-a-star spectroscopic characteristics of solar flares can be used as a benchmark for the detection and analysis of stellar flares. Here, we study the Sun-as-a-star properties of an X1.0 solar flare, using high-resolution spectroscopic data obtained by the Chinese H α Solar Explorer (CHASE). A noise reduction algorithm based on discrete Fourier transformation is first employed to enhance the signal-to-noise ratio of the space-integral H α spectrum, with a focus on its typical characteristics. For the flare of interest, we find that the average H α profile displays a strong emission at the line center and an obvious line broadening. It also presents a clear red asymmetry, corresponding to a redshift velocity of around 50 km s ^−1 that slightly decreases with time, consistent with previous results. Furthermore, we study how the size of the space-integral region affects the characteristics of the flare's Sun-as-a-star H α profile. It is found that although the redshift velocity calculated from the H α profile remains unchanged, the detectability of the characteristics weakens as the space-integral region becomes larger. An upper limit on the size of the target region where the red asymmetry is detectable is estimated. It is also found that the intensity in H α profiles, measured by the equivalent widths of the spectra, are significantly underestimated if the H α spectra are further averaged in the time domain.

Peripheral ossifying fibroma (POF) is the most common reactive gingival lesion. The cause and pathology are well understood. Peripheral giant cell granuloma, pyogenic granuloma, fibroma, and peripheral fibroma are among the differential diagnoses. The confirmed diagnosis for POF is based on histopathological evidence. A healthy 49-year-old man with fibrous swelling in the lower left anterior region of his jaw is discussed in this case report. Excisional biopsy was performed utilizing a diode laser in pulse mode at 980 nm. The patient was monitored for a year, and there was no recurrence.

We present imaging and spectroscopic diagnostics of a long filament during its formation with the observations from the Chinese H α Solar Explorer and Solar Dynamics Observatory. The seed filament first appeared at about 05:00 UT on 2022 September 13. Afterward, it grew gradually and connected to another filament segment nearby, building up a long filament at about 20:00 UT on the same day. The CHASE H α spectra show an obvious centroid absorption with mild broadening at the main spine of the long filament, which is interpreted as evidence of filament material accumulation. More interestingly, near the footpoints of the filament, persistent redshifts have been detected in the H α spectra during the filament formation, indicating continuous drainage of filament materials. Furthermore, through inspecting the extreme-ultraviolet (EUV) images and magnetograms, it was found that EUV jets and brightenings appeared repeatedly at the junction of the two filament segments, where opposite magnetic polarities converged and canceled each other continuously. These results suggest the occurrence of intermittent magnetic reconnection that not only connects magnetic structures of the two filament segments but also supplies cold materials for the filament channel likely by the condensation of injected hot plasma, even though a part of the cold materials falls down to the filament footpoints at the same time.

The ability to mentally represent future events is a significant human psychological achievement. A challenge that people encounter is that they often lack detailed specifics about distant relative to near future events. Construal level theory proposes that people represent distant future events by their abstract and essential features-a process referred to as high-level construal. As events become temporally proximal, people represent events by their increasingly available and reliable concrete and idiosyncratic features-a process referred to as low-level construal. The present fMRI experiment provides direct neural evidence for these assertions. Using the why-how localizer as a measure of construal level, results revealed brain regions associated with both temporal distance and high-level construal (medial prefrontal cortex), as well as temporal proximity and low-level construal (precuneus). We discuss the implications of these findings for the neuroscience of mental time travel and cognitive representation.

Objective: To evaluate the clinical efficacy of direct and indirect composite resin restorations placed in posterior teeth after 2 years. Materials and Methods: A total of 60 teeth were restored with a direct composite resin (BRILLIANT EverGlowTM– Coltene) and an indirect composite resin (CeramageTM– Shofu). All restorations were assessed using the Modified United States Public Health Service criteria at baseline, 3 months, 6 months, 12 months, 18 months, and 24 months after placement. Statistical analysis was performed with Chi-Square test and Cochran's Q test. Results: At the 2-year evaluation, all restorations were retained, with Alpha ratings at 100%. Only two teeth (in the direct restoration group) required endodontic intervention after 18 months due to secondary caries. Surface texture, marginal discoloration, and marginal integrity were predominantly scored as Alpha after 2 years for both groups. Color match was scored as Alpha in 65.4% of direct restorations and 84.4% of indirect restorations. Conclusion: Within the limitations of this study it can be concluded that the clinical performance of the indirect restorations was much improved than that of direct restorations.

Background: The association between preganancy and poor oral health and its effects on preterm low birth infants are well documented in scientific literature. A pilot study was conducted with 160 pregnant women in the year 2016 showed that oral hygiene awareness among pregnant women was least among those who did not complete basic school education. This was the motive to conduct the present survey. Aims and Objectives: The Aim of this survey is to determine the knowledge and awareness on oral hygiene practices and to evaluate the role of education status on awareness of poor oral health and pregnancy outcomes among 500 pregnant women in Chennai city, Tamil Nadu, using self-tested questionnaire. Materials and Methods: A Descriptive cross sectional study was conducted among 500 pregnant women attending maternity clinics in Chennai using Self administered questionnaire. Results: Among 500 participants majority of them 72% of school educated never visited dentist. Only 6.2% of Undergraduate women was referred by gynecologist for dental check up during pregnancy. 31.3% of school educated felt that first trimester was safe to undergo dental treatment with p=0.000. Conclusion: This survey showed that level of education played a significant role in awareness about oral hygiene among pregnant women.

The realization of compact X-ray sources is one of the most intriguing applications of laser-plasma based electron acceleration. These sources based on the oscillation of short micron-sized bunches of relativistic electrons provide femtosecond X-ray pulses that are collimated, bright, and partially coherent. The state-of-the-art laser plasma X-ray sources can provide photon flux of over 1011 photons/shot. The photon flux can further be enhanced with the availability of high repetition rate, high-power lasers, providing capacities complementary to the large scale facilities such as synchrotrons and X-ray free-electron lasers. Even though the optimization of such sources has been underway for the last two decades, their applications in material and biological sciences are still emerging, which entail the necessity of a user-oriented X-ray beamlines. Based on this concept, a high-power-laser-based user-oriented X-ray source is being developed at ELI Beamlines. This article reports on the ELI Gammatron beamline and presents an overview of the research accessible with the ultrashort hard X-ray pulses at the ELI Gammatron beamline.

Background: Unanticipated difficult tracheal intubation remains a primary concern of anaesthesiologists. The aim of the present study was to compare upper-lip bite test (ULBT) with other four predictors namely modified Mallampati test (MMT), thyromental distance (TMD), sternomental distance (SMD) and interincisor distance (IID) for predicting difficulty in intubation. Methods: Airway assessment indices were evaluated and compared in 60 American Society of Anesthesiologists physical status Grade I and II patients undergoing general anaesthesia at a tertiary care teaching hospital in South India. The cut-off points for defining the difficult intubation (DI) were as follows: for ULBT, Class III; MMT, Classes 3 and 4; TMD

The solidification microstructure and phase transition of ten La-Nd-Fe alloys were studied experimentally by scanning electron microscopy (SEM) with energy dispersive x-ray spectroscopy (EDS) and differential thermal analysis (DTA). Phase compositions and phase transition temperatures of La-Nd-Fe alloys were measured and the formed phases were identified. The solidification behavior of La-Nd-Fe alloys was analyzed based on the experimental results of both solidification microstructure and phase transitions with the reported Nd-Fe, La-Fe and La-Nd sub-binary phase diagrams. The results indicated that the solidification processes of all La-Nd-Fe alloys begin with the precipitation of primary phase fcc( γ -Fe) and then follow by the formation of bcc( α -Fe) and/or Fe _17 Nd _2 phases through different peritectic reactions. The solidification microstructure of three Fe _65 La _29 Nd _6 , Fe _65 La _25 Nd _10 and Fe _65 La _22 Nd _13 alloys presents three-phase microstructure with bcc( α -Fe), Fe _17 Nd _2 and fcc(La,Nd) phases, while that of three Fe _65 La _19 Nd _16 , Fe _65 La _9 Nd _26 and Fe _65 La _15.5 Nd _19.5 alloys shows three-phase microstructure with bcc( α -Fe), Fe _17 Nd _2 and dhcp(La,Nd) phases. The two-phase micorstructure with Fe _17 Nd _2 and dhcp(La,Nd) ohases was formed in the solidification microstructure of four Fe _65 La _12 Nd _23 , Fe _65 La _6.5 Nd _28.5 , Fe _65 La _4 Nd _31 and Fe _65 La _1.5 Nd _33.5 alloys. Moreover, no stable ternary intermetallic compound was found in the present experiments. The solidification microstructure and phase transition of La-Nd-Fe alloys would provide a basis for the design of La-Nd-Fe-B magnetic alloys.

The phase formation of the (Nd _0.70 Pr _0.30−x Ce _x ) _2.28 Fe _13.58 B _1.14 (x = 0.10, 0.15, and 0.20; hereafter defined as Pr _20 Ce _10 , Pr _15 Ce _15 and Pr _10 Ce _20 , respectively) and (Nd _0.60 Pr _0.40−y Ce _y ) _2.28 Fe _13.58 B _1.14 (y = 0.10, 0.20, and 0.30; hereafter defined as Pr _30 Ce _10 , Pr _20 Ce _20 and Pr _10 Ce _30 , respectively) alloys that were prepared via the arc-melting method was investigated experimentally. The x-ray diffraction results revealed that all alloys annealed at 1173 K for 360 h consisted of a (NdPrCe) _2 Fe _14 B main phase with a tetragonal Nd _2 Fe _14 B-typed structure (space group P4 _2 /mnm) and an α -Fe minor phase, except for the Pr _10 Ce _30 alloy, which contained an additional CeFe _2 phase. The magnetic properties of the (Nd _0.70 Pr _0.30−x Ce _x ) _2.28 Fe _13.58 B _1.14 and (Nd _0.60 Pr _0.40−y Ce _y ) _2.28 Fe _13.58 B _1.14 ribbons that were prepared by melt spinning were examined. The remanence (B _r ) and maximum magnetic energy product ((BH) _max ) of the (Nd _0.70 Pr _0.30−x Ce _x ) _2.28 Fe _13.58 B _1.14 ribbons increased first and then decreased, whereas the coercivity (H _cj ) of the ribbons increased with an increase in Ce content. The B _r and (BH) _max of the (Nd _0.60 Pr _0.60−y Ce _y ) _2.28 Fe _13.58 B _1.14 ribbons increased, whereas the H _cj of the ribbons decreased gradually with an increase in Ce content. This changed behavior of magnetic properties is attributed to the variation of volume fraction of the α -Fe phase and different phase formations in the melt-spun ribbons. The Curie temperatures (T _c ) of all ribbons decreased slightly with Ce substitution, which results from the lower Curie temperatures of Pr _2 Fe _14 B and Ce _2 Fe _14 B. The Pr _10 Ce _30 ribbon with a higher Ce content exhibited optimal magnetic properties (B _r = 9.71 kGs, H _cj = 13.09 kOe, (BH) _max = 18.78 MGOe), which indicates that suitable magnetic properties of the Nd–Pr–Ce–Fe–B melt-spun ribbons can be achieved by alloy-composition and phase-formation design.

Executive Summary In the years to come, India will be highly vulnerable to the impacts of rising sea level, floods and droughts, water pollution, and the associated health hazards. In addition to the severe effect of water-related concerns on health and heat stress, water scarcity problems would also impact generation of electricity, both in hydel and thermal power sectors, industrial production, which often requires large volumes of water, and irrigation, which again is highly water-based. To address such severe concerns in the realm of unavailability of water in desired quantity and quality, many industry initiatives have been implemented. However, the challenge is huge and full industry participation in this endeavour is still awaited in India. Private sector participation would be a relevant and much-needed initiative to the cause of water management in the country. However, the inclination of private sector in taking up such initiatives has not been ascertained yet. Therefore, an empirical academic research was undertaken to determine (a) if there is an awareness in private sector in India with regard to existence and impacts of water crisis and (b) if such awareness would lead to voluntary participation on the part of private sector. A research instrument in the form of survey questionnaire was administered on a population of practising managers across the country. Thereafter, structural equation modelling was carried out to analyse the data, thus, obtained. The research concludes that there is significant awareness that (a) water crisis does exist in India, (b) there is a possibility of spread of disease due to water stress, and that (c) private sector could help in recycling, treatment of wastewater, and conservation initiatives. Further, the research also shows a significant link between awareness about disease impacts due to water stress and propensity to support individual initiatives. The awareness that private sector could help in recycling and treatment of wastewater and in conservation initiatives would lead to voluntary participation of private sector both in the organizational capacity as well as in managers taking up individual initiatives.

Prolonged ventilation leads to a higher incidence of ventilator associated pneumonia(VAP) resulting in ventilator dependency, increased costs and subsequent weaning failures. Prevention and aggressive treatment of VAP alongwith patient friendly newer modes of ventilation like adaptive support ventilation go a long way in successful management of these cases.

Multiwall carbon nanotubes (MWCNTs) reinforced Mg alloy AZ31 nanocomposites were fabricated by mechanical alloying and powder metallurgy technique. The reinforcement material MWCNTs were blended in three weight fractions (0.33%, 0.66%, and 1%) with the matrix material AZ31 (Al-3%, zinc-1% rest Mg) and blended through mechanical alloying using a high energy planetary ball mill. Specimens of monolithic AZ31 and AZ31-MWCNT composites were fabricated through powder metallurgy technique. The microstructure, density, hardness, porosity, ductility, and tensile properties of monolithic AZ31 and AZ31-MWCNT nano composites were characterized and compared. The characterization reveals significant reduction in CNT (carbon nanoTube) agglomeration and enhancement in microstructure and mechanical properties due to mechanical alloying through ball milling.

Cohesin protease Separase plays a key role in faithful segregation of sister chromatids by cleaving the cohesin complex at the metaphase to anaphase transition. Homozygous deletion of ESPL1 gene that encodes Separase protein results in embryonic lethality in mice and Separase overexpression lead to aneuploidy and tumorigenesis. However, the effect of Separase haploinsufficiency has not been thoroughly investigated.Here we examined the effect of ESPL1 heterozygosity using a hypomorphic mouse model that has reduced germline Separase activity. We report that while ESPL1 mutant (ESPL1 (+/hyp)) mice have a normal phenotype, in the absence of p53, these mice develop spontaneous T- and B-cell lymphomas, and leukemia with a significantly shortened latency as compared to p53 null mice. The ESPL1 hypomorphic, p53 heterozygous transgenic mice (ESPL1(+/hyp), p53(+/-)) also show a significantly reduced life span with an altered tumor spectrum of carcinomas and sarcomas compared to p53(+/-) mice alone. Furthermore, ESPL1(+/hyp), p53(-/-) mice display significantly higher levels of genetic instability and aneuploidy in normal cells, as indicated by the abnormal metaphase counts and SKY analysis of primary splenocytes.Our results indicate that reduced levels of Separase act synergistically with loss of p53 in the initiation and progression of B- and T- cell lymphomas, which is aided by increased chromosomal missegregation and accumulation of genomic instability. ESPL1(+/hyp), p53(-/-) mice provide a new animal model for mechanistic study of aggressive lymphoma and also for preclinical evaluation of new agents for its therapy.