Search

We study proton and heavy ion irradiation effects on Phase Change Memories (PCM) with MOSFET and BJT selectors and the effect of the irradiation on the retention characteristics of these devices. Proton irradiation produces noticeable variations in the cell distributions in PCM with MOSFET selectors mostly due to leakage currents affecting the transistors. PCM with BJT selectors show only small variations after proton irradiation. PCM cells do not appear to be impacted by heavy-ion irradiation. Using high temperature accelerated retention tests, we demonstrate that the retention capability of these memories is not compromised by the irradiation. Index Terms--Chalcogenide material, GST, heavy ions, non-volatile memories, phase change memories (PCM), radiation effects.

We investigate Total Ionizing Dose effects on 4 Mbit Phase Change Memories (PCM) arrays. We demonstrate a high robustness of PCM against ionizing radiation. We irradiated PCM with 8-MeV electrons. Only small variations are measured in the cell distributions after irradiation. The primary cause of these variations is the degradation of the Bit-Line and the Word-Line selector MOSFETs. Finally, radiation does not compromise the functionality of the SET and the RESET operations. Index Terms--Chalcogenide materials, GST, non-volatile memories, phase change memory, radiation effects, total ionizing dose.

A µtrench Phase-Change Memory (PCM) cell with MOSFET selector and its integration in a 4-Mb experimental chip fabricated in 0.18-µm CMOS technology are presented. A cascode bitline biasing scheme allows read and write voltages to be fed to the addressed storage elements with the required accuracy. The high-performance capabilities of PCM cells were experimentally investigated. A read access time of 45 ns was measured together with a write throughput of 5 MB/s, which represents an improved performance as compared to NOR Flash memories. Programmed cell current distributions on the 4-Mb array demonstrate an adequate working window and, together with first endurance measurements, assess the feasibility of PCMs in standard CMOS technology with few additional process modules. [ABSTRACT FROM AUTHOR]