Search

Mild impacts to the head, particularly when repetitive in nature, are increasingly recognized to have a range of significant negative implications for brain health. Much of the ongoing research in the field is focused on the neurological consequences of these injuries, and the relationship between head impacts and long-term neurodegenerative conditions such as chronic traumatic encephalopathy and Alzheimer’s disease. However, our understanding of the complex relationship between applied mechanical force at impact, brain pathophysiology, and neurological function, remains incomplete. Past research has shown that mild head impacts, even below the threshold that results in cranial fracture, induce changes in cranial bone structure and morphology. These structural and physiological changes likely have implications for the transmission of mechanical force into the underlying brain parenchyma. Here, we review this evidence in the context of the current understanding of bone mechanosensitivity and the consequences of traumatic brain injuries or concussions. We postulate that heterogeneity of the calvarium including differing bone thickness due to prior impacts, age, or individual variability, may be a modulator of outcomes following subsequent head impacts. We advocate for greater consideration of cranial responses to head injury in both experimental and computer modeling of impact biomechanics, and raise the hypothesis that calvarial bone thickness represents a novel biomarker of brain injury vulnerability after head trauma.

Models are mathematical representations of systems, processes or phenomena. In biomechanics, finite-element modelling (FEM) can be a powerful tool, allowing biologists to test form–function relationships in silico , replacing or extending results of in vivo experimentation. Although modelling simplifications and assumptions are necessary, as a minimum modelling requirement the results of the simplified model must reflect the biomechanics of the modelled system. In cases where the three-dimensional mechanics of a structure are important determinants of its performance, simplified two-dimensional modelling approaches are likely to produce inaccurate results. The vertebrate mandible is one among many three-dimensional anatomical structures routinely modelled using two-dimensional FE analysis. We thus compare the stress regimes of our published three-dimensional model of the chimpanzee mandible with a published two-dimensional model of the chimpanzee mandible and identify several fundamental differences. We then present a series of two-dimensional and three-dimensional FE modelling experiments that demonstrate how three key modelling parameters, (i) dimensionality, (ii) symmetric geometry, and (iii) constraints, affect deformation and strain regimes of the models. Our results confirm that, in the case of the primate mandible (at least), two-dimensional FEM fails to meet this minimum modelling requirement and should not be used to draw functional, ecological or evolutionary conclusions.

Although concussions can result in persistent neurological post-concussion symptoms, they are typically invisible on routine magnetic resonance imaging (MRI) scans. Our study aimed to investigate the use of ultra-high-field diffusion tensor imaging (UHF-DTI) in discerning severity-dependent microstructural changes in the mouse brain following a concussion. Twenty-three C57BL/6 mice were randomly allocated into three groups: the low concussive (LC

How sauropod dinosaurs were able to withstand the forces associated with their immense size represents one of the most challenging biomechanical scenarios in the evolution of terrestrial tetrapods, but also one lacking robust biomechanical testing. Here, we use finite element analyses to quantify the biomechanical effects of foot skeletal postures with and without the presence of a soft tissue pad in sauropodomorphs. We find that none of the models can maintain bone stresses that fall within optimal bone safety factors in the absence of a soft tissue pad. Our findings suggest that a soft tissue pad in sauropods would have reduced bone stresses by combining the mechanical advantages of a functionally plantigrade foot with the plesiomorphic skeletally digitigrade saurischian condition. The acquisition of a developed soft tissue pad by the Late Triassic–Early Jurassic may represent one of the key adaptations for the evolution of gigantism that has become emblematic of these dinosaurs.

Objectives Carabelli is a nonmetric dental trait variably expressed as a small pit to a prominent cusp in the maxillary molars of modern humans. Investigations on the occurrence and expression rates of this trait have been conducted extensively, tracing its origin to genetic sources. However, there remains a lack of understanding about its potential role in chewing. In this study, we examine molar macrowear with the aim of reconstructing Carabelli trait occlusal dynamics occurring during chewing. Methods We have examined 96 deciduous and permanent maxillary molars of children and young adults from Yuendumu, an Australian Aboriginal population that was at an early stage of transition from a nomadic and hunter-gatherer way of life to a more settled existence. We apply a well-established method, called Occlusal Fingerprint Analysis, which is a digital approach for analyzing dental macrowear allowing the reconstruction of jaw movements required to produce wear pattern specific to each tooth. Results Carabelli trait slightly enlarges the surface functional area, especially in those molars where this feature is expressed in its cuspal form and it is closer to the occlusal plane. Moreover, the highly steep contact planes would also indicate that Carabelli wear areas contribute to increasing the shearing abilities of the occluded teeth, which are particularly important when processing fibrous and tough foods. Conclusions The macrowear analysis suggests that Carabelli trait in the Aboriginal people from Yuendumu slightly enhanced occlusion and probably played some functional role during mastication. Future biomechanical and microwear analyses could provide additional information on the mechanical adaptation of Carabelli trait in modern human dentition.

Genetic, experimental and clinical studies have consistently confirmed that inhibition of Proprotein Convertase Subtilisin/Kexin type 9 (PCSK9) can result in significant lowering of LDL-C and two fully human PCSK9 monoclonal antibodies have received regulatory approval for use in highrisk patients. Co-administration of PCSK9 with statins has resulted in extremely low LDL-C levels with excellent short-term safety profiles. While results from Phase III clinical trials provided significant evidence about the role of PCSK9 inhibitors in reducing cardiovascular event rates, their impact on mortality remains less clear. PCSK9 inhibitor therapy can be considered for high-risk patients who are likely to experience significant cardiovascular risk reduction.

Lower jaw (mandible) fractures significantly impact patient health and well‐being due to pain and difficulty eating, but the best technique for repairing the most common subtype—angle fractures—and rehabilitating mastication is unknown. Our study is the first to use realistic in silico simulation of chewing to quantify the effects of Champy and biplanar techniques of angle fracture fixation. We show that more rigid, biplanar fixation results in lower strain magnitudes in the miniplates, the bone around the screws, and in the fracture zone, and that the mandibular strain regime approximates the unfractured condition. Importantly, the strain regime in the fracture zone is affected by chewing laterality, suggesting that both fixation type and the patient's post‐fixation masticatory pattern—ipsi‐ or contralateral to the fracture— impact the bone healing environment. Our study calls for further investigation of the impact of fixation technique on chewing behavior. Research that combines in vivo and in silico approaches can link jaw mechanics to bone healing and yield more definitive recommendations for fixation, hardware, and postoperative rehabilitation to improve outcomes. © 2021 The Authors. JBMR Plus published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research.

The biomechanics of the sauropod dinosaur pes is poorly understood, particularly among the earliest members of the group. To date, reasonably complete and articulated pedes in Early Middle Jurassic sauropods are rare, limited to a handful of taxa. Of these, Rhoetosaurus brownei, from eastern Australia, is currently the only one from the Gondwanan Middle Jurassic that preserves an articulated pes. Using Rhoetosaurus brownei as a case exemplar, we assessed its paleobiomechanical capabilities and pedal posture. Physical and virtual manipulations of the pedal elements were undertaken to evaluate the range of motion between the pedal joints, under both bone-to-bone and cartilaginous scenarios. Using the results as constraints, virtual reconstructions of all possible pedal postures were generated. We show that Rhoetosaurus brownei was capable of significant digital mobility at the osteological metatarsophalangeal and distal interphalangeal joints. We assume these movements would have been restricted by soft tissue in life but that their presence would have helped in the support of the animal. Further insights based on anatomy and theoretical mechanical constraints restricted the skeletal postures to a range encompassing digitigrade to subunguligrade stances. The approach was extended to additional sauropodomorph pedes, and some validation was provided via the bone data of an African elephant pes. Based on the resulting pedal configurations, the in-life plantar surface of the sauropod pes is inferred to extend caudally from the digits, with a soft tissue pad supporting the elevated metatarsus. The plantar pad is inferred to play a role in the reduction of biomechanical stresses, and to aid in support and locomotion. A pedal pad may have been a key biomechanical innovation in early sauropods, ultimately resulting in a functionally plantigrade pes, which may have arisen during the Early to Middle Jurassic. Further mechanical studies are ultimately required to permit validation of this long-standing hypothesis.

The characterization of developmental phenotypes often relies on the accurate linear measurement of structures that are small and require laborious preparation. This is tedious and prone to errors, especially when repeated for the multiple replicates that are required for statistical analysis, or when multiple distinct structures have to be analysed. To address this issue, we have developed a pipeline for characterization of long-bone length and inter-vertebral distance using X-ray microtomography (XMT) scans. The pipeline involves semi-automated algorithms for automatic thresholding and fast interactive isolation and 3D-model generation of the main limb bones, using either the open-source ImageJ plugin BoneJ or the commercial Mimics Innovation Suite package. The tests showed the appropriate combination of scanning conditions and analysis parameters yields fast and comparable length results, highly correlated with the measurements obtained via ex vivo skeletal preparations. Moreover, since XMT is not destructive, the samples can be used afterwards for histology or other applications. Our new pipelines will help developmental biologists and evolutionary researchers to achieve fast, reproducible and non-destructive length measurement of bone samples from multiple animal species.Summary statementBeltran Diaz et al. present a semi-automated pipeline for fast and versatile characterization of bone length from micro-CT images of mouse developmental samples.

The mechanical behaviour of the mandibles of Pan and Macaca during mastication was compared using finite element modelling. Muscle forces were calculated using species-specific measures of physiological cross-sectional area and scaled using electromyographic estimates of muscle recruitment in Macaca. Loading regimes were compared using moments acting on the mandible and strain regimes were qualitatively compared using maps of principal, shear and axial strains. The enlarged and more vertically oriented temporalis and superficial masseter muscles of Pan result in larger sagittal and transverse bending moments on both working and balancing sides, and larger anteroposterior twisting moments on the working side. The mandible of Pan experiences higher principal strain magnitudes in the ramus and mandibular prominence, higher transverse shear strains in the top of the symphyseal region and working-side corpus, and a predominance of sagittal bending-related strains in the balancing-side mandible. This study lays the foundation for a broader comparative study of Hominidae mandibular mechanics in extant and fossil hominids using finite element modelling. Pan's larger and more vertical masseter and temporalis may make it a more suitable model for hominid mandibular biomechanics than Macaca.

Finite element analysis (FEA) is a commonly used tool in musculoskeletal biomechanics and vertebrate paleontology. The accuracy and precision of finite element models (FEMs) are reliant on accurate data on bone geometry, muscle forces, boundary conditions and tissue material properties. Simplified modeling assumptions, due to lack of in vivo experimental data on material properties and muscle activation patterns, may introduce analytical errors in analyses where quantitative accuracy is critical for obtaining rigorous results. A subject-specific FEM of a rhesus macaque mandible was constructed, loaded and validated using in vivo data from the same animal. In developing the model, we assessed the impact on model behavior of variation in (i) material properties of the mandibular trabecular bone tissue and teeth; (ii) constraints at the temporomandibular joint and bite point; and (iii) the timing of the muscle activity used to estimate the external forces acting on the model. The best match between the FEA simulation and the in vivo experimental data resulted from modeling the trabecular tissue with an isotropic and homogeneous Young’s modulus and Poisson’s value of 10 GPa and 0.3, respectively; constraining translations along X,Y, Z axes in the chewing (left) side temporomandibular joint, the premolars and the m1; constraining the balancing (right) side temporomandibular joint in the anterior-posterior and superior-inferior axes, and using the muscle force estimated at time of maximum strain magnitude in the lower lateral gauge. The relative strain magnitudes in this model were similar to those recorded in vivo for all strain locations. More detailed analyses of mandibular strain patterns during the power stroke at different times in the chewing cycle are needed.

Knowledge of the variation in the elastic properties of mandibular cortical bone is essential for modeling bone function. Our aim was to characterize the elastic properties of rhesus macaque mandibular cortical bone and compare these to the elastic properties from mandibles of dentate humans and baboons. Thirty cylindrical samples were harvested from each of six adult female rhesus monkey mandibles. Assuming orthotropy, axes of maximum stiffness in the plane of the cortical plate were derived from ultrasound velocity measurements. Further velocity measurements with longitudinal and transverse ultrasonic transducers along with measurements of bone density were used to compute three-dimensional cortical elastic properties using equations based on Hooke's law. Results showed regional variations in the elastic properties of macaque mandibular cortical bone that have both similarities and differences with that of humans and baboons. So far, the biological and structural basis of these differences is poorly understood.

BackgroundWithin-species skull shape variation of marsupial mammals is widely considered low and strongly size-dependent (allometric), possibly due to developmental constraints arising from the altricial birth of marsupials. However, species whose skulls are impacted by strong muscular stresses – particularly those produced through mastication of tough food items – may not display such intrinsic patterns very clearly because of the known plastic response of bone to muscle activity of the individual. In such cases, allometry may not dominate within-species shape variation, even if it is a driver of evolutionary shape divergence; ordination of shape in a geometric morphometric context through principal component analysis (PCA) should reveal main variation in areas under masticatory stress (incisor region/zygomatic arches/mandibular ramus); but this main variation should emerge from high individual variability and thus have low eigenvalues.ResultsWe assessed the evidence for high individual variation through 3D geometric morphometric shape analysis of crania and mandibles of three species of grazing-specialized wombats, whose diet of tough grasses puts considerable strain on their masticatory system. As expected, we found little allometry and low Principal Component 1 (PC1) eigenvalues within crania and mandibles of all three species. Also as expected, the main variation was in the muzzle, zygomatic arches, and masticatory muscle attachments of the mandibular ramus. We then implemented a new test to ask if the landmark variation reflected on PC1 was reflected in individuals with opposite PC1 scores and with opposite shapes in Procrustes space. This showed that correspondence between individual and ordinated shape variation was limited, indicating high levels of individual variability in the masticatory apparatus.DiscussionOur results are inconsistent with hypotheses that skull shape variation within marsupial species reflects a constraint pattern. Rather, they support suggestions that individual plasticity can be an important determinant of within-species shape variation in marsupials (and possibly other mammals) with high masticatory stresses, making it difficult to understand the degree to which intrinsic constraints act on shape variation at the within-species level. We conclude that studies that link micro- and macroevolutionary patterns of shape variation might benefit from a focus on species with low-impact mastication, such as carnivorous or frugivorous species.

Maternal obesity increases the risk for pregnancy complications and adverse neonatal outcome and has been associated with long-lasting adverse effects in the offspring, including increased body fat mass, insulin resistance, and increased risk for premature cardiovascular disease. Lifestyle interventions in pregnancy have produced no or modest effects in the reduction of adverse pregnancy outcomes in obese mothers. The Metformin in Obese Pregnant Women trial was associated with reduced adverse pregnancy outcomes and had no effect on birthweight. However, the long-term implications of metformin on the health of offspring remain unknown.The purpose of this study was to assess whether prenatal exposure to metformin can improve the cardiovascular profile and body composition in the offspring of obese mothers.In 151 children from the Metformin in Obese Pregnant Women trial, body composition, peripheral blood pressure, and arterial pulse wave velocity were measured. Central hemodynamics (central blood pressure and augmentation index) were estimated with the use of an oscillometric device. Left ventricular cardiac function and structure were assessed by echocardiography.Children were 3.9±1.0 years old, and 77 of them had been exposed to metformin prenatally. There was no significant difference in peripheral blood pressure, arterial stiffness, and body composition apart from gluteal and tricep circumferences, which were lower in the metformin group (P.05). The metformin group, compared with the placebo group, had lower central hemodynamics (mean adjusted decrease, -0.707 mm Hg for aortic systolic blood pressure, -1.65 mm Hg for aortic pulse pressure, and -2.68% for augmentation index; P.05 for all) and lower left ventricular diastolic function (adjusted difference in left atrial area, -0.525 cmChildren of obese mothers who were exposed prenatally to metformin, compared with those who were exposed to placebo, had lower central hemodynamic and cardiac diastolic indices. These results suggest that the administration of metformin in obese pregnant women potentially may have a beneficial cardiovascular effect for their offspring.

The primary anatomical function of the periodontal ligament (PDL) is to attach teeth to their sockets. However, theoretical and constitutive mechanical models have proposed that during mastication the PDL redistributes local occlusal loads and reduces the jaw’s resistance to torsional deformations. These hypotheses imply that accurately modelling the PDL’s material properties and geometry in finite element analysis (FEA) is a prerequisite to obtaining precise strain and deformation data. Yet, many finite element studies of the human and non-human primate masticatory apparatus exclude the PDL or model it with simplicity, in part due to limitations in µCT/CT scan resolution and material property assignment. Previous studies testing the sensitivity of finite element models (FEMs) to the PDL have yielded contradictory results, however a major limitation of these studies is that FEMs were not validated against in vivo bone strain data. Hence, this study uses a validated and subject specific FEM to assess the effect of the PDL on strain and deformation regimes in the lower jaw of a rhesus macaque (Macaca mulatta) during simulated unilateral post-canine chewing. Our findings demonstrate that the presence of the PDL does influence local and global surface strain magnitudes (principal and shear) in the jaw. However, the PDL’s effect is limited (diff. ~200-300µe) in areas away from the alveoli. Our results also show that varying the PDL’s Young’s Modulus within the range of published values (0.07-1750 MPa) has very little effect on global surface strains. These findings suggest that the mechanical importance of the PDL in FE models of the mandible during chewing is dependent on the scope of the hypotheses being tested. If researchers are comparing strain gradients across species/taxa, the PDL may be excluded with minimal effect on results, but, if researchers are concerned with absolute strain values, sensitivity analysis is required.

From the camel’s toes to the horse’s hooves, the diversity in foot morphology among mammals is striking. One distinguishing feature is the presence of fat pads, which may play a role in reducing foot pressures, or may be related to habitat specialization. The camelid family provides a useful paradigm to explore this as within this phylogenetically constrained group we see prominent (camels) and greatly reduced (alpacas) fat pads. We found similar scaling of vertical ground reaction force with body mass, but camels had larger foot contact areas, which increased with velocity, unlike alpacas, meaning camels had relatively lower foot pressures. Further, variation between specific regions under the foot was greater in alpacas than camels. Together, these results provide strong evidence for the role of fat pads in reducing relative peak locomotor foot pressures, suggesting that the fat pad role in habitat specialization remains difficult to disentangle.

The mechanical behaviour of the mandibles of Pan and Macaca during mastication was compared using finite element modelling. Muscle forces were calculated using species-specific measures of physiological cross-sectional area and scaled using electromyographic estimates of muscle recruitment in Macaca . Loading regimes were compared using moments acting on the mandible and strain regimes were qualitatively compared using maps of principal, shear and axial strains. The enlarged and more vertically oriented temporalis and superficial masseter muscles of Pan result in larger sagittal and transverse bending moments on both working and balancing sides, and larger anteroposterior twisting moments on the working side. The mandible of Pan experiences higher principal strain magnitudes in the ramus and mandibular prominence, higher transverse shear strains in the top of the symphyseal region and working-side corpus, and a predominance of sagittal bending-related strains in the balancing-side mandible. This study lays the foundation for a broader comparative study of Hominidae mandibular mechanics in extant and fossil hominids using finite element modelling. Pan 's larger and more vertical masseter and temporalis may make it a more suitable model for hominid mandibular biomechanics than Macaca .

Increased incidence of congenital heart disease (CHD) has been reported in the offspring of monochorionic twin gestations. Assisted reproductive technology (ART), which is related to increased rates of twinning, has also been associated with higher risk of birth defects. We studied the incidence of CHD in a cohort of twins to clarify the contribution of type of conception and chorionicity.Data concerning 874 live-born twins of which at least one was admitted in our Neonatal Unit during 1995-2012 were analysed. Forty-five % (N=197) of the gestations resulted from ART (in vitro fertilisation or intracytoplasmic sperm insertion).In the ART group 32/389 (8.2%) had CHD compared to 21/485 (4.3%) infants conceived naturally (OR 1.90, 95%CI 1.08-3.34, p=0.024). Spontaneous-conception gestations had higher incidence of monochorionic placentation (47/245 versus 4/197, p0.001), and included younger mothers (29.1±5.2 versus 33.9±5.5years, p0.001) who had higher parity (median 2 [range 1-7] versus 1 Pinborg (2005), Blondel and Kaminski (2002), Knopman et al. (2014), Kyvik and Derom (2006) ; p0.001). Multivariable logistic regression analysis showed that ART (OR 2.60, 95% CI 1.24-5.45) and monochorionicity (OR 3.49, 95% CI 1.57-7.77) were significant determinants of CHD, independently of maternal age, parity, and the gender of the offspring.We confirmed that monochorionic twins have increased risk of CHD and we documented a higher incidence of CHD in ART twins independently of chorionicity. We suggest improvement of echocardiographic skills of health care professionals involved in prenatal screening and foetal cardiology referral of ART dichorionic twins with suspicious findings at screening, in addition to all monochorionic gestations.

The aim of the present study was to assess the expression of key virulence genes, during growth of a Listeria monocytogenes isolate in liquid medium, on melon and rocket at different temperatures and time. For that purpose, BHI broth, rocket and melon were inoculated at 7.0-7.5 log CFU mL(-1) or g(-1)and stored at 4, 10 and 30 °C. Sampling took place upon inoculation and after 0.5, 6 and 24 h of incubation. The RNA was stabilized and the expression of hly, plcA, plcB, sigB, inlA, inlB, inlC, inlJ, lmo2672 and lmo2470 was assessed by RT-qPCR. The results obtained were summarized into two observations; the first one referring to the interactive effect of incubation temperature and type of substrate and the second one to the effect of time on gene expression. Regarding the latter, nearly all genes were regulated upon inoculation and exhibited differential expression in the subsequent sampling times indicating the existence of additional regulatory mechanisms yet to be explored.

Mandible morphology has yet to yield definitive information on primate diet, probably because of poor understanding of mandibular loading and strain regimes, and overreliance on simple beam models of mandibular mechanics. We used a finite element model of a macaque mandible to test hypotheses about mandibular loading and strain regimes and relate variation in muscle activity during chewing on different foods to variation in strain regimes. The balancing-side corpus is loaded primarily by sagittal shear forces and sagittal bending moments. On the working side, sagittal bending moments, anteroposterior twisting moments, and lateral transverse bending moments all reach similar maxima below the bite point; sagittal shear is the dominant loading regime behind the bite point; and the corpus is twisted such that the mandibular base is inverted. In the symphyseal region, the predominant loading regimes are lateral transverse bending and negative twisting about a mediolateral axis. Compared with grape and dried fruit chewing, nut chewing is associated with larger sagittal and transverse bending moments acting on balancing- and working-side mandibles, larger sagittal shear on the working side, and larger twisting moments about vertical and transverse axes in the symphyseal region. Nut chewing is also associated with higher minimum principal strain magnitudes in the balancing-side posterior ramus; higher sagittal shear strain magnitudes in the working-side buccal alveolar process and the balancing-side oblique line, recessus mandibulae, and endocondylar ridge; and higher transverse shear strains in the symphyseal region, the balancing-side medial prominence, and the balancing-side endocondylar ridge. The largest food-related differences in maximum principal and transverse shear strain magnitudes are in the transverse tori and in the balancing-side medial prominence, extramolar sulcus, oblique line, and endocondylar ridge. Food effects on the strain regime are most salient in areas not traditionally investigated, suggesting that studies seeking dietary effects on mandible morphology might be looking in the wrong places.

Background: Maternal obesity is associated with adverse cardiometabolic outcome in the offspring. We aimed to assess whether prenatal exposure to metformin can improve the cardiovascular profile and body composition in the offspring of obese mothers. Methods: In 151 children from the MOP trial we measured body composition, peripheral blood pressure and arterial pulse wave velocity. Central haemodynamics (central blood pressure and augmentation index) were estimated using the Vicorder device. Left ventricular cardiac function and structure were assessed by echocardiography. In 39 children from each group the metabolic profile was assessed. Findings: Children were 3.9±1.0 years of age and 77 were exposed to metformin prenatally. There was no significant difference in peripheral blood pressure, arterial stiffness and body composition apart from gluteal and tricep circumferences which were lower in the metformin group (p

SUMMARY Foot pressure distributions during locomotion have causal links with the anatomical and structural configurations of the foot tissues and the mechanics of locomotion. Elephant feet have five toes bound in a flexible pad of fibrous tissue (digital cushion). Does this specialized foot design control peak foot pressures in such giant animals? And how does body size, such as during ontogenetic growth, influence foot pressures? We addressed these questions by studying foot pressure distributions in elephant feet and their correlation with body mass and centre of pressure trajectories, using statistical parametric mapping (SPM), a neuro-imaging technology. Our results show a positive correlation between body mass and peak pressures, with the highest pressures dominated by the distal ends of the lateral toes (digits 3, 4 and 5). We also demonstrate that pressure reduction in the elephant digital cushion is a complex interaction of its viscoelastic tissue structure and its centre of pressure trajectories, because there is a tendency to avoid rear ‘heel’ contact as an elephant grows. Using SPM, we present a complete map of pressure distributions in elephant feet during ontogeny by performing statistical analysis at the pixel level across the entire plantar/palmar surface. We hope that our study will build confidence in the potential clinical and scaling applications of mammalian foot pressures, given our findings in support of a link between regional peak pressures and pathogenesis in elephant feet.

The superior transverse torus of the catarrhine mandible has been shown to effectively reduce bending at the symphysis during unilateral postcanine biting. While the adult superior transverse torus contains trabecular bone, the juvenile one is almost entirely filled by developing permanent incisors until their eruption. This study uses finite elements analysis (FEA) to investigate whether the presence of developing incisors in the juvenile symphysis increases strains on the superior transverse torus. Two FE models of a juvenile Macaca fascicularis mandible were created: one included all the developing teeth; the second was modified to remove the incisor tooth crypts by filling them with trabecular bone. The models were loaded identically to simulate static physiological unilateral biting on dp4 and strain magnitudes, patterns and distributions of the two FE models were compared. The FEA results show a notable increase in strain magnitudes by up to 40% when the developing incisors are present. The results indicate that, in order to maintain the same symphyseal strain magnitudes during chewing, the presence of the incisors in the symphysis necessitates a larger superior transverse torus in the juvenile than would be required if the superior transverse torus did not house the developing incisors. These results highlight the adaptational balance of the symphyseal morphology throughout ontogeny between biomechanics and the spatial demands of the developing dentition. Based on the findings we therefore propose that the spatial requirements of the developing incisors during ontogeny can act as a constraint on the functional adaptation and subsequent adult morphology observed in the catarrhine mandibular symphysis.

Whilst the periodontal ligament (PDL) acts as an attachment tissue between bone and tooth, hypotheses regarding the role of the PDL as a hydrodynamic damping mechanism during intraoral food processing have highlighted its potential importance in finite element (FE) analysis. Although experimental and constitutive models have correlated the mechanical function of the PDL tissue with its anisotropic, heterogeneous, viscoelastic and non-linear elastic nature, in many FE simulations the PDL is either present or absent, and when present is variably modelled. In addition, the small space the PDL occupies and the inability to visualize the PDL tissue using μCT scans poses issues during FE model construction and so protocols for the PDL thickness also vary. In this paper we initially test and validate the sensitivity of an FE model of a macaque mandible to variations in the Young's modulus and the thickness of the PDL tissue. We then tested the validity of the FE models by carrying out experimental strain measurements on the same mandible in the laboratory using laser speckle interferometry. These strain measurements matched the FE predictions very closely, providing confidence that material properties and PDL thickness were suitably defined. The FE strain results across the mandible are generally insensitive to the absence and variably modelled PDL tissue. Differences are only found in the alveolar region adjacent to the socket of the loaded tooth. The results indicate that the effect of the PDL on strain distribution and/or absorption is restricted locally to the alveolar bone surrounding the teeth and does not affect other regions of the mandible.

Finite element analysis (FEA) is a fundamental method to study stresses and strains in complex structures, with the accuracy of an FEA being reliant on a number of variables, not least the precision and complexity of the model's geometry. Techniques such as computed tomography (CT) allow general geometries to be derived relatively quickly; however, constraints on CT image resolution mean defining subcortical geometries can be problematic. In relation to the overall mechanical response of a complex structure during FEA, the consequence of variable subcortical modelling is not known. Here we test this sensitivity with a series of FE models of a macaque mandible with different subcortical geometries and comparing the FEA strain magnitudes and orientations. The validity of the FE models was tested by carrying out experimental strain measurements on the same mandible. These strain measurements matched the FE predictions, providing confidence that material properties and model geometry were suitably defined. Results of this study show that cortical bone alone is not as effective in resisting bending as it is when coupled with subcortical bone, and as such subcortical geometries must be modelled during an FEA. This study demonstrates that the fine detail of the mandibular subcortical structure can be adequately modelled as a solid when assigned an appropriate Young's modulus value, in this case ranging from 1 to 2 GPa. This is an important and encouraging result for the creation of FE models of materials where CT image resolution or poor preservation prevent the accurate modelling of subcortical bone.

A fundamental research question for morphologists is how morphological variation in the skeleton relates to function. Traditional approaches have advanced our understanding of form-function relationships considerably but have limitations. Strain gauges can only record strains on a surface, and the geometry of the structure can limit where they can be bonded. Theoretical approaches, such as geometric abstractions, work well on problems with simple geometries and material properties but biological structures typically have neither of these. Finite element analysis (FEA) is a method that overcomes these problems by reducing a complex geometry into a finite number of elements with simple geometries. In addition, FEA allows strain to be modelled across the entire surface of the structure and throughout the internal structure. With advances in the processing power of computers, FEA has become more accessible and as such is becoming an increasingly popular tool to address questions about form-function relationships in development and evolution, as well as human biology generally. This paper provides an introduction to FEA including a review of the sequence of steps needed for the generation of biologically accurate finite element models that can be used for the testing of biological and functional morphology hypotheses.

Herman Melville’s novelMoby Dickwas inspired by historical instances in which large sperm whales (Physeter macrocephalus L.) sank 19th century whaling ships by ramming them with their foreheads. The immense forehead of sperm whales is possibly the largest, and one of the strangest, anatomical structures in the animal kingdom. It contains two large oil-filled compartments, known as the “spermaceti organ” and “junk,” that constitute up to one-quarter of body mass and extend one-third of the total length of the whale. Recognized as playing an important role in echolocation, previous studies have also attributed the complex structural configuration of the spermaceti organ and junk to acoustic sexual selection, acoustic prey debilitation, buoyancy control, and aggressive ramming. Of these additional suggested functions, ramming remains the most controversial, and the potential mechanical roles of the structural components of the spermaceti organ and junk in ramming remain untested. Here we explore the aggressive ramming hypothesis using a novel combination of structural engineering principles and probabilistic simulation to determine if the unique structure of the junk significantly reduces stress in the skull during quasi-static impact. Our analyses indicate that the connective tissue partitions in the junk reduce von Mises stresses across the skull and that the load-redistribution functionality of the former is insensitive to moderate variation in tissue material parameters, the thickness of the partitions, and variations in the location and angle of the applied load. Absence of the connective tissue partitions increases skull stresses, particularly in the rostral aspect of the upper jaw, further hinting of the important role the architecture of the junk may play in ramming events. Our study also found that impact loads on the spermaceti organ generate lower skull stresses than an impact on the junk. Nevertheless, whilst an impact on the spermaceti organ would reduce skull stresses, it would also cause high compressive stresses on the anterior aspect of the organ and the connective tissue case, possibly making these structures more prone to failure. This outcome, coupled with the facts that the spermaceti organ houses sensitive and essential sonar producing structures and the rostral portion of junk, rather than the spermaceti organ, is frequently a site of significant scarring in mature males suggest that whales avoid impact with the spermaceti organ. Although the unique structure of the junk certainly serves multiple functions, our results are consistent with the hypothesis that the structure also evolved to function as a massive battering ram during male-male competition.