Search

Nature serves as an important source of inspiration for the innovation and development of micro- and nanostructures for advanced functional surfaces and substrates. One example used in nature is a spikey surface ranging from micrometer-sized spikes on pollen grains down to the nanometer-scale protein spikes found on viruses. This study explored the realization of such highly textured surfaces via the nanoengineering of self-assembled poly(γ-benzyl-l-glutamate) "nanospikes", exploiting solvent-induced chain organization, controlled surface chemical functionality, and enhanced stability in the form of polymer brushes. The reversible solvent-responsive behavior of these polymer chains and the aggregation behavior of the chain-ends were investigated via fluorescence characterization and studied through molecular simulations. Vapor-based solvent treatments were developed for orientation control with in situ analysis to understand film response and brush organizational behavior under different selected conditions. The effect of sub-100 nm nanopatterning on surface morphology and chain organization was examined via an integrated approach of experimental and computational studies. The methodologies established in this study present opportunities for engineering sophisticated nanoscale spikey surfaces with high customizability by means of nanolithography combined with solvent-assisted treatments.

Biofouling on marine surfaces causes immense material and financial harm for maritime vessels and related marine industries. Previous reports have shown the effectiveness of amphiphilic coating systems based on poly(dimethylsiloxane) (PDMS) against such marine foulers. Recent studies on biofouling mechanisms have also demonstrated acidic microenvironments in biofilms and stronger adhesion at low-pH conditions. This report presents the design and utilization of amphiphilic polymer coatings with buffer functionalities as an active disruptor against four different marine foulers. Specifically, this study explores both neutral and zwitterionic buffer systems for marine coatings, offering insights into coating design. Overall, these buffer systems were found to improve foulant removal, and unexpectedly were the most effective against the diatom Navicula incerta .

Introducing functionality onto PE surfaces is a longstanding challenge in polymer science, driven by the need for polymer materials with improved adhesion and antifouling properties. Herein, we report surface-initiated hydrogen atom transfer-reversible addition-fragmentation chain transfer (SI HAT-RAFT) as a robust method to grow high-density brush polymers from PE surfaces. We demonstrate that, under mild conditions, direct initiation from the C-H bonds of PE surfaces allows for the graft polymerization of a variety of (meth)acrylate monomers. The resulting polymer brushes reached several hundred nanometers in thickness with densities of ca . 0.62 chains/nm 2 , compared to the current standard of ∼0.28 chains/nm 2 . Finally, we show that our method is capable of dramatically improving the adhesive properties of PE surfaces. This work enables the preparation of PE with diverse surface functionalities for potential use in biomedical, industrial, and battery applications.

Polydimethylsiloxane (PDMS) has been widely used as a surface coating material, which has been reported to possess dynamic omniphobicity to a wide range of both polar and nonpolar solvents due to its high segmental flexibility and mobility. However, such high flexibility and mobility also enable penetration of small molecules into PDMS coatings, which alter the chemical and physical properties of the coating layers. To improve the anti-penetration properties of PDMS, a series of fluorinated alkyl segments are grafted to a diblock copolymer of polystyrene- block -poly(vinyl methyl siloxane) (PS- b -PVMS) using thiol-ene click reactions. This article reports the chemical characterization of these model fluorosilicone block copolymers and uses fluorescence measurements to investigate the dye penetration characteristics of polymer thin films. The introduction of longer fluorinated alkyl chains can gradually increase the anti-penetration properties as the time to reach the maximum fluorescence intensity ( t peak ) gradually increases from 11 s of PS- b -PVMS to more than 1000 s of PS- b -P( n -C 6 F 13 -VMS). The improvement of anti-penetration properties is attributed to stronger inter-/intrachain interactions, phase segregation of ordered fluorinated side chains, and enhanced hydrophobicity caused by the grafting of fluorinated alkyl chains.

Polymeric zwitterions exhibit exceptional fouling resistance through the formation of a strongly hydrated surface of immobilized water molecules. While being extensively tested for their performance in biomedical, membrane, and, to a lesser extent, marine environments, few studies have investigated how the molecular design of the zwitterion may enhance its performance. Furthermore, while theories of zwitterion antifouling mechanisms exist for molecular-scale foulant species (e.g., proteins and small molecules), it remains unclear how molecular-scale mechanisms influence the micro- and macroscopic interactions of relevance for marine applications. The present study addresses these gaps through the use of a modular zwitterion chemistry platform, which is characterized by a combination of surface-sensitive sum frequency generation (SFG) vibrational spectroscopy and marine assays. Zwitterions with increasingly delocalized cations demonstrate improved fouling resistance against the green alga Ulva linza . SFG spectra correlate well with the assay results, suggesting that the more diffuse charges exhibit greater surface hydration with more bound water molecules. Hence, the number of bound interfacial water molecules appears to be more influential in determining the marine antifouling activities of zwitterionic polymers than the binding strength of individual water molecules at the interface.

Nanochannels with controllable gating behavior are attractive features in a wide range of nanofluidic applications including viral detection, particle sorting, and flow regulation. Here, we use selective sidewall functionalization of nanochannels with a polyelectrolyte brush to investigate the channel gating response to variations in solution pH and ionic strength. The conformational and structural changes of the interfacial brush layer within the channels are interrogated by specular and off-specular neutron reflectometry. Simultaneous fits of the specular and off-specular signals, using a dynamical theory model and a fitting optimization protocol, enable detailed characterization of the brush conformations and corresponding channel geometry under different solution conditions. Our results indicate a collapsed brush state under basic pH, equivalent to an open gate, and an expanded brush state representing a partially closed gate upon decreasing the pH and salt concentration. These findings open new possibilities in noninvasive in situ characterization of tunable nanofluidics and lab-on-chip devices with advanced designs and improved functionality.

Understanding how small molecules penetrate and contaminate polymer films is of vital importance for developing protective coatings for a wide range of applications. To this end, rhodamine B fluorescent dye is visualized diffusing through polystyrene-polydimethylsiloxane block copolymer (BCP) coatings using confocal microscopy. The intensity of dye inside the coatings grows and decays non-monotonically, which is likely due to a combination of dye molecule transport occurring concurrently in different directions. An empirical fitting equation allows for comparing the contamination rates between copolymers, demonstrating that dye penetration is related to the chemical makeup and configuration of the BCPs. This work shows that confocal microscopy can be a useful tool to visualize the transport of a fluorophore in space and time through a coating., (© 2023 The Authors. Macromolecular Rapid Communications published by Wiley-VCH GmbH.)

Two types of amphiphilic random terpolymers, poly(ethylene glycol methyl ether methacrylate)- ran -poly(2,2,6,6-tetramethylpiperidinyloxy methacrylate)- ran -poly(polydimethyl siloxane methacrylate) (PEGMEMA- r -PTMA- r -PDMSMA), were synthesized and evaluated for antifouling (AF) and fouling-release (FR) properties using diverse marine fouling organisms. In the first stage of production, the two respective precursor amine terpolymers containing (2,2,6,6-tetramethyl-4-piperidyl methacrylate) units (PEGMEMA- r -PTMPM- r -PDMSMA) were synthesized by atom transfer radical polymerization using various comonomer ratios and two initiators: alkyl halide and fluoroalkyl halide. In the second stage, these were selectively oxidized to introduce nitroxide radical functionalities. Finally, the terpolymers were incorporated into a PDMS host matrix to create coatings. AF and FR properties were examined using the alga Ulva linza , the barnacle Balanus improvisus , and the tubeworm Ficopomatus enigmaticus . The effects of comonomer ratios on surface properties and fouling assay results for each set of coatings are discussed in detail. There were marked differences in the effectiveness of these systems against the different fouling organisms. The terpolymers had distinct advantages over monopolymeric systems across the different organisms, and the nonfluorinated PEG and nitroxide combination was identified as the most effective formulation against B. improvisus and F. enigmaticus .

Leveraging the self-assembling behavior of liquid crystals designed for controlling ion transport is of both fundamental and technological significance. Here, we have designed and prepared a liquid crystal that contains 2,5-bis(thien-2-yl)thieno[3,2- b ]thiophene (BTTT) as mesogenic core and conjugated segment and symmetric tetra(ethylene oxide) (EO4) as polar side chains for ion-conducting regions. Driven by the crystallization of the BTTT cores, BTTT/dEO4 exhibits well-ordered smectic phases below 71.5 °C as confirmed by differential scanning calorimetry, polarized optical microscopy, temperature-dependent wide-angle X-ray scattering, and grazing incidence wide-angle X-ray scattering (GIWAXS). We adopted a combination of experimental GIWAXS and molecular dynamics (MD) simulations to better understand the molecular packing of BTTT/dEO4 films, particularly when loaded with the ion-conducting salt lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). Ionic conduction of BTTT/dEO4 is realized by the addition of LiTFSI, with the material able to maintain smectic phases up to r = [Li + ]/[EO] = 0.1. The highest ionic conductivity of 8 × 10 -3 S/cm was attained at an intermedium salt concentration of r = 0.05. It was also found that ion conduction in BTTT/dEO4 is enhanced by forming a smectic layered structure with irregular interfaces between the BTTT and EO4 layers and by the lateral film expansion upon salt addition. This can be explained by the enhancement of the misalignment and configurational entropy of the side chains, which increase their local mobility and that of the solvated ions. Our molecular design thus illustrates how, beyond the favorable energetic interactions that drive the assembly of ion solvating domains, modulation of entropic effects can also be favorably harnessed to improve ion conduction.

The resolution, line edge roughness, and sensitivity (RLS) trade-off has fundamentally limited the lithographic performance of chemically amplified resists. Production of next-generation transistors using extreme ultraviolet (EUV) lithography depends on a solution to this problem. A resist that simultaneously increases the effective reaction radius of its photogenerated acids while limiting their diffusion radius should provide an elegant solution to the RLS barrier. Here, we describe a generalized synthetic approach to phthalaldehyde derivatives using sulfur(VI) fluoride exchange click chemistry that dramatically expands usable chemical space by enabling virtually any non-ionic photoacid generator (PAG) to be tethered to phthalaldehyde. The resulting polymers represent the first ever PAG-tethered self-immolative resists in an architecture that simultaneously displays high contrast, extraordinary sensitivity, and low roughness under EUV exposure. We believe this class of resists will ultimately enable researchers to overcome the RLS trade-off.

Biofouling is a major disruptive process affecting the fuel efficiency and durability of maritime vessel coatings. Previous research has shown that amphiphilic coatings consisting of a siloxane backbone functionalized with hydrophilic moieties are effective marine antifouling and fouling-release materials. Poly(ethylene glycol) (PEG) has been the primary hydrophilic component used in such systems. Recently, the morpholine group has emerged as a promising compact alternative in antifouling membranes but is yet to be studied against marine foulants. In this work, the use of morpholine moieties to generate amphiphilicity in a poly(dimethylsiloxane) (PDMS)-based antifouling and fouling-release coating was explored. Two separate coating sets were investigated. The first set examined the incorporation of an N-substituted morpholine amine, and while these coatings showed promising fouling-release properties for Ulva linza , they had unusually high settlement of spores compared to controls. Based on those results, a second set of materials was synthesized using an N-substituted morpholine amide to probe the source of the high settlement and was found to significantly improve antifouling performance. Both coating sets included PEG controls with varying lengths to compare the viability of the morpholine structures as alternative hydrophilic groups. Surfaces were evaluated through a combination of bubble contact angle goniometry, profilometry, X-ray photoelectron spectroscopy (XPS), and marine bioassays against two soft fouling species, U. linza and Navicula incerta , known to have different adhesion characteristics.

Polymer-grafted nanoparticles (PGNs) receive great attention because they possess the advantages of both the grafted polymer and inorganic cores, and thus demonstrate superior optical, electronic, and mechanical properties. Thus, PGNs with tailorable interparticle interactions are indispensable for the formation of a superlattice with a defined and ordered structure. In this work, the synthesis of PGNs is reported which can form interparticle hydrogen-bonding to enhance the formation of well-defined 2D nanoparticle arrays. Various polymers, including poly(4-vinyl pyridine) (P4VP), poly(dimethyl aminoethyl acrylate) (PDMAEMA), and poly(4-acetoxy styrene) (PAcS), are attached to silica cores by a "grafting from" in a mini emulsion-like synthesis approach. SiO 2 -PAcS brushes are deprotected by hydrazinolysis and converted into poly(4-vinyl phenol) (PVP), containing hydroxyl groups as potential hydrogen-bonding donor sites. Understanding and controlling interparticle interactions by varying grafting density in the range of 10 -2 -10 -3 chain nm -2 , and the formation of interparticle hydrogen bonding relevant for self-assembly of PGNs and potential formation of PGN superlattice structures are the motivations for this study., (© 2021 Wiley-VCH GmbH.)

Polymers are commonly used in applications that require long-term exposure to water and aqueous mixtures, serving as water purification membranes, marine antifouling coatings, and medical implants, among many other applications. Because polymer surfaces restructure in response to the surrounding environment, in situ characterization is crucial for providing an accurate understanding of the surface chemistry under conditions of use. To investigate the effects of surface-active side chains on polymer surface chemistry and resultant interactions with interfacial water (i.e., water sorption), we present synchrotron ambient pressure X-ray photoelectron spectroscopy (APXPS) studies performed on poly(ethylene oxide) (PEO)- and poly(dimethylsiloxane) (PDMS)-based polymer surfaces modified with amphiphilic polypeptoid side chains, previously demonstrated to be efficacious in marine fouling prevention and removal. The polymer backbone and environmental conditions were found to affect polypeptoid surface presentation: due to the surface segregation of its fluorinated polypeptoid monomers under vacuum, the PEO-peptoid copolymer showed significant polypeptoid content in both vacuum and hydrated conditions, while the modified PDMS-based copolymer showed increased polypeptoid content only in hydrated conditions due to the hydrophilicity of the ether monomers and polypeptoid backbone. Polypeptoids were found to bind approximately 2.8 water molecules per monomer unit in both copolymers, and the PEO-peptoid surface showed substantial water sorption that suggests a surface with a more diffuse water/polymer interface. This work implies that side chains are ideal for tuning water affinity without altering the base polymer composition, provided that surface-driving groups are present to ensure activity at the interface. These types of systematic modifications will generate novel polymers that maximize bound interfacial water and can deliver surface-active groups to the surface to improve the effectiveness of polymer materials.

The buildup of organic matter and organisms on surfaces exposed to marine environments, known as biofouling, is a disruptive and costly process affecting maritime operations. Previous research has identified some of the surface characteristics particularly suited to the creation of antifouling and fouling-release surfaces, but there remains room for improvement against both macrofouling and microfouling organisms. Characterization of their adhesives has shown that many rely on oxidative chemistries. In this work, we explore the incorporation of the stable radical 2,2,6,6-tetramethylpipiderin-1-oxyl (TEMPO) as a component in an amphiphilic block copolymer system to act as an inhibitor for marine cements, disrupting adhesion of macrofouling organisms. Using polystyrene- b -poly(dimethylsiloxane- r -vinylmethysiloxane) block copolymers, pendent vinyl groups were functionalized with TEMPO and poly(ethylene glycol) to construct an amphiphilic material with redox active character. The antifouling and fouling-release performance of these materials was investigated through settlement and removal assays of three model fouling organisms and correlated to surface structure and chemistry. Surfaces showed significant antifouling character and fouling-release performance was increased substantially toward barnacles by the incorporation of stable radicals, indicating their potential for marine antifouling applications.

In this study of nanopatterned helical poly(benzyl-l-glutamate) (PBLG) brushes, rod-type brush arrays were fabricated via an integrated process of high-resolution lithography and surface-initiated vapor deposition polymerization (SI-VDP). "Nanospikes" of polymer brushes with spacings of less than 100 nm were produced. The topology and areal behavior of the resulting patterned rod-like brushes were analyzed and compared with patterned coil-type brushes. A geometric study of these self-assembled "nanospikes" was carried out, and their cross sections were investigated via focused ion beam (FIB) and scanning electron microscopy (SEM). Furthermore, the presence of poly( N -isopropylacrylamide) (PNIPAM) brushes in unpatterned regions was shown to inhibit undesired "inter-spike" bridging of the PBLG brushes, resulting in more well-defined nanostructures. It was shown that rod-like polypeptide brushes are capable of self-segregation and become arranged vertically without any external support from their surroundings, to form a rod bundle end-point functional topography that could provide possible pathways for studies of model biological surfaces, directed assembly of nanoparticles, or binary mixed brush surfaces with dual properties.

Macromolecular radicals are receiving growing interest as functional materials in energy storage devices and in electronics. With the need for enhanced conductivity, researchers have turned to macromolecular radicals bearing conjugated backbones, but results thus far have yielded conjugated radical polymers that are inferior in comparison to their non-conjugated partners. The emerging explanation is that the radical unit and the conjugated backbone (both being redox active) transfer electrons between each other, essentially "quenching" conductivity or capacity. Here, the internal charge transfer process is quantified using a polythiophene loaded with 0, 25, or 100% nitroxide radicals (2,2,6,6-tetramethyl-1-piperidinyloxy [TEMPO]). Importantly, deconvolution of the cyclic voltammograms shows mixed faradaic and non-faradaic contributions that contribute to the internal charge transfer process. Further, mixed ion-electron transfer is determined for the 100% TEMPO-loaded conjugated radical polymer, from which it is estimated that one triflate anion and one propylene carbone molecule are exchanged for every electron. Although these findings indicate the reason behind their poor conductivity and capacity, they point to how these materials might be used as voltage regulators in the future., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

This work represents a joint computational and experimental study on a series of n -ethylene glycol (PEO n )-terminated quaterthiophene (4T) oligomers for 1 < n < 10 to elucidate their self-assembly behavior into a smectic-like lamellar phase. This study builds on an earlier study for n = 4 that showed that our model predictions were consistent with experimental data on the melting behavior and structure of the lamellar phase, with the latter consisting of crystal-like 4T domains and liquid-like PEO4 domains. The present study aims to understand how the length of the terminal PEO n chains modulates the disordering temperature of the lamellar phase and hence the relative stability of the ordered structure. A simplified bilayer model, where the 4T domains are not explicitly described, is put forward to efficiently estimate the disordering effect of the PEO domains with increasing n ; this method is first validated by correctly predicting that layers of alkyl (PE)-capped 4T oligomers (for 1 < n < 10) stay ordered at room temperature. Both 4T-domain implicit and explicit model simulations reveal that the order-disorder temperature decreases with the length of the PEO capping chains, as the associated increase in conformational entropy drives a tendency toward disorder that overtakes the cohesive energy, keeping the ordered packing of the 4T domains.

We report a facile synthetic approach to create stable radical block copolymers containing a secondary fluorinated block via anionic polymerization using a bulky, sterically hindered countercation composed of a sodium ion and di-benzo-18-crown-6 complex. The synthetic conditions described in this report allowed for controlled molecular weights and dispersity (<1.3) of both homopolymers: poly(2,2,6,6-tetramethyl-1-piperidinyloxy-methacrylate) (PTMA) and poly(2,2,2-trifluoroethyl methacrylate) (PTFEMA) as well as their block copolymers (PTMA- b -PTFEMA). The stable radical concentration of the polymers was determined by electron spin resonance (ESR) and showed radical content above 70%. An analysis of the microphase morphologies in PTMA- b -PTFEMA thin films via atomic force microscopy (AFM) and grazing incidence small angle X-ray scattering (GISAXS) showed clear evidence of long-range ordering of lamellar and cylindrical morphologies with 32 and 36 nm spacing, respectively. The long-range ordering of the morphologies was developed with the aid of two separate neutral layers: PTMA- ran -PTFEMA- ran -poly(hydroxyl ethyl methacrylate) (PHEMA) and poly(isobutyl methacrylate) (PiBMA)- ran -PTFEMA- ran -PHEMA, which helped us corroborate, along with the Zisman method, the surface energy estimation of PTMA to be 30.1 mJ/m 2 ., Competing Interests: Conflicts of interest There are no conflicts to declare.

Developing soft materials with both ion and electron transport functionalities is of broad interest for energy-storage and bioelectronics applications. Rational design of these materials requires a fundamental understanding of interactions between ion and electron conducting blocks along with the correlation between the microstructure and the conduction characteristics. Here, we investigate the structure and mixed ionic/electronic conduction in thin films of a liquid crystal (LC) 4T/PEO4, which consists of an electronically conducting quarterthiophene (4T) block terminated at both ends by ionically conducting oligoethylenoxide (PEO4) blocks. Using a combined experimental and simulation approach, 4T/PEO4 is shown to self-assemble into smectic, ordered, or disordered phases upon blending the materials with the ionic dopant bis(trifluoromethane)sulfonimide lithium (LiTFSI) under different LiTFSI concentrations. Interestingly, at intermediate LiTFSI concentration, ordered 4T/PEO4 exhibits an electronic conductivity as high as 3.1 × 10 -3 S/cm upon being infiltrated with vapor of the 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) molecular dopant while still maintaining its ionic conducting functionality. This electronic conductivity is superior by an order of magnitude to the previously reported electronic conductivity of vapor co-deposited 4T/F4TCNQ blends. Our findings demonstrate that structure and electronic transport in mixed conduction materials could be modulated by the presence of the ion transporting component and will have important implications for other more complex mixed ionic/electronic conductors.

In marine industries, the accumulation of organic matter and marine organisms on ship hulls and instruments limits performance, requiring frequent maintenance and increasing fuel costs. Current coatings technology to combat this biofouling relies heavily on the use of toxic, biocide-containing paints. These pose a serious threat to marine ecosystems, affecting both target and nontarget organisms. Innovation in the design of polymers offers an excellent platform for the development of alternatives, but the creation of a broad-spectrum, nontoxic material still poses quite a hurdle for researchers. Surface chemistry, physical properties, durability, and attachment scheme have been shown to play a vital role in the construction of a successful coating. This review explores why these characteristics are important and how recent research accounts for them in the design and synthesis of new environmentally benign antifouling and fouling release materials.

Direct covalent functionalization of large-area single-layer hexagonal boron nitride (hBN) with various polymer brushes under mild conditions is presented. The photopolymerization of vinyl monomers results in the formation of thick and homogeneous (micropatterned, gradient) polymer brushes covalently bound to hBN. The brush layer mechanically and chemically stabilizes the material and allows facile handling as well as long-term use in water splitting hydrogen evolution reactions., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Herein, we report a simple coat/cure preparation of epoxide-functionalized surfaces using a photocurable copolymer technology. The photocurable copolymer, poly(glycidyl methacrylate- co-butyl acrylate- co-4-benzoylphenyl methacrylate) (GBB), was synthesized by single electron transfer-living radical polymerization (SET-LRP). The epoxide content in the copolymer was tuned by controlling the content of glycidyl methacrylate. Three copolymers, GBB(1), GBB(2), and GBB(3), with epoxide contents of 22, 63, and 91 mol %, respectively, were cast onto polypropylene films and photocured by UV-light exposure. Subsequently, iminodiacetic acids (IDA) were immobilized onto the GBB-coated materials via a ring-opening reaction. The IDA-functionalized coatings GBB(1)-IDA, GBB(2)-IDA, and GBB(3)-IDA presented IDA contents of 1.47 ± 0.08, 18.67 ± 1.46, and 49.05 ± 2.88 nmol/cm 2 , respectively, which increased as the epoxide content increased. The IDA-functionalized GBB coatings exhibited metal chelating capability toward transition metal ions (e.g., iron and copper). The reported photocurable copolymer technology offers a facile and tunable preparation of epoxide-functionalized surfaces, with potential extended applications in biopatterning, active packaging, and nanotechnology.

Mixed polymer brushes of rod-type polypeptide and coil-type vinyl polymer brushes were synthesized via two sequential steps of vapor deposition surface-initiated ring-opening polymerization (SI-ROP) and surface-initiated atom transfer radical polymerization (SI-ATRP), respectively. The effect on polypeptide brushes by coil-type brushes of their surface morphology, film thickness, and orientation were investigated before and after solvent quenching processes using chloroform and acetone. Before solvent quenching, the as-grown coil-type brushes forced the polypeptide brushes to stand up from the surface, resulting in higher film thickness, but the polypeptide brushes remained randomly oriented. After solvent quenching, polypeptide brushes tended to aggregate into conical bundles with an orientation perpendicular to the substrate, but coil-type brushes restricted the free arrangement of the polypeptide brushes and lessen their upward movement. Changes in film thickness, rod orientation, morphology, and wettability were observed with increased molecular weight of the coil-type polymer in the mixed brushes.

We report the formation of robust, reproducible, pinhole-free, thin layers of fluorinated polyfluorene conjugated copolymers on a range of polymeric underlayers via a simple solution processing method. This is driven by the different characters of the fluorinated and nonfluorinated sections of these polymers. Photothermal deflection spectroscopy is used to determine that these layers are 1-2 nm thick, corresponding to a molecularly thin layer. Evidence that these layers are continuous and pinhole-free is provided by electroluminescence data from polymer LED devices that incorporate these layers within the stacked LED structure. These reveal, remarkably, light emission solely from these molecularly thin layers.

This work reports the first transient electrospun nanofiber mat triggered by UV-irradiation using poly(propylene carbonate) (PPC)/poly(phthalaldehyde) (cPPA) polymer blends. The ability to trigger room temperature transience of nanofiber mats without the need for additional heat or solvent expands its utility in nonbiological fields, especially for transient electronic devices. The addition of a photo-acid-generator to the system, working in combination with UV light, provides an acid source to enhance degradation because both polymer backbones are acid-sensitive. Electrospinning enables the production of PPC/cPPA composite nanofiber mats capable of significant degradation upon exposure to UV radiation while maintaining relatively high mechanical properties. An acid amplifier, an autocatalytically decomposing compound triggered by acid, was used to generate more acid and accelerate nanofiber degradation. The electrospun fiber mats can be post-annealed to achieve an improved mat with a mechanical strength of ∼170 MPa.

A new emulsion polymerization based on Activators Regenerated by Electron Transfer Atom Transfer Radical Polymerization (ARGET ATRP) has been developed to produce poly(methyl methacrylate) (PMMA). The critical components of single-pot synthesis via a mini Monomer Encapsulated ARGET ATRP emulsion polymerization will be discussed. In this method, monomer is isolated in a micelle by pre-emulsification in a nonionic surfactant through high power stirring while acetone is introduced to the polymerization to aid in reactant transport and tetrabutylammonium salts are used as phase transfer agents. Polymerizations using tetrabutylammonium bromide (TBAB) were more controlled and demonstrated low Đ ( M w / M n < 1.17), where those using tetrabutylammonium chloride (TBAC) exhibited higher Đ ( M w / M n > 1.50). First-order linear kinetics for MMA polymerizations at 100 mM TBAB was demonstrated, while the reactions deviated from linearity at higher concentrations of TBAB and all concentrations of TBAC.

Incorporating natural product antifoulants (NPAs) into coatings with controlled surface topography is considered a promising way to suppress marine fouling. However, the rapid leakage of NPAs and the relatively complicated process of constructing well-patterned topography remain unresolved problems for practical applications. In this work, capsaicin bonded to CoFe 2 O 4 /gelatin magnetic nanoparticles was mixed with a polydimethylsiloxane (PDMS)-based block copolymer. When applied together by a simple spray-coating method, these materials formed a film. The leakage of capsaicin was restrained by the chemical bonds with the CoFe 2 O 4 /gelatin nanospheres. The primary nanorough structure was constructed by the phase separation of the PDMS-based copolymer. The secondary nanorough structure was formed by the incorporation of capsaicin-loaded CoFe 2 O 4 /gelatin nanospheres, which were demonstrated to improve the orientation of the PDMS-based block copolymer chains. The combination of oriented nanotopography and nonleaking capsaicin endows the coating with enhanced, long-lasting antifouling ability.

Reconstituted supported lipid bilayers (SLB) are widely used as in vitro cell-surface models because they are compatible with a variety of surface-based analytical techniques. However, one of the challenges of using SLBs as a model of the cell surface is the limited complexity in membrane composition, including the incorporation of transmembrane proteins and lipid diversity that may impact the activity of those proteins. Additionally, it is challenging to preserve the transmembrane protein native orientation, function, and mobility in SLBs. Here, we leverage the interaction between cell plasma membrane vesicles and polyelectrolyte brushes to create planar bilayers from cell plasma membrane vesicles that have budded from the cell surface. This approach promotes the direct incorporation of membrane proteins and other species into the planar bilayer without using detergent or reconstitution and preserves membrane constituents. Furthermore, the structure of the polyelectrolyte brush serves as a cushion between the planar bilayer and rigid supporting surface, limiting the interaction of the cytosolic domains of membrane proteins with this surface. Single particle tracking was used to analyze the motion of GPI-linked yellow fluorescent proteins (GPI-YFP) and neon-green fused transmembrane P2X2 receptors (P2X2-neon) and shows that this platform retains over 75% mobility of multipass transmembrane proteins in its native membrane environment. An enzyme accessibility assay confirmed that the protein orientation is preserved and results in the extracellular domain facing toward the bulk phase and the cytosolic side facing the support. Because the platform presented here retains the complexity of the cell plasma membrane and preserves protein orientation and mobility, it is a better representative mimic of native cell surfaces, which may find many applications in biological assays aimed at understanding cell membrane phenomena.

There are conflicting reports in the literature about the presence of room temperature conductivity in poly(2,2,6,6-tetramethylpiperidinyloxy methacrylate) (PTMA), a redox active polymer with radical groups pendent to an insulating backbone. To understand the variability in the findings across the literature and synthetic methods, we prepared PTMA using three living methods - anionic, ATRP and RAFT polymerization. We find that all three synthetic methods produce PTMA with radical yields of 70 - 80%, controlled molecular weight, and low dispersity. Additionally, we used on-chip EPR to probe the robustness of radical content in solid films under ambient air and light, and found negligible change in the radical content over time. Electrically, we found that PTMA is highly insulating - conductivity in the range 10- 11 S/cm - regardless of the synthetic method of preparation. These findings provide greater clarity for potential applications of PTMA in energy storage., Competing Interests: Conflicts of interest There are no conflicts to declare.

In this study, a series of perpendicular lamellae-forming poly(polyhedral oligomeric silsesquioxane methacrylate-block-2,2,2-trifluoroethyl methacrylate)s (PMAPOSS-b-PTFEMAs) was developed based on the bottom-up concept of creating a simple yet effective material by tailoring the chemical properties and molecular composition of the material. The use of silicon (Si)-containing hybrid high-χ block copolymers (BCPs) provides easy access to sub-10 nm feature sizes. However, as the surface free energies (SFEs) of Si-containing polymers are typically vastly lower than organic polymers, this tends to result in the selective segregation of the inorganic block onto the air interface and increased difficulty in controlling the BCP orientation in thin films. Therefore, by balancing the SFEs between the organic and inorganic blocks through the use of poly(2,2,2-trifluoroethyl methacrylate) (PTFEMA) on the organic block, a polymer with an SFE similar to Si-containing polymers, orientation control of the BCP domains in thin films becomes much simpler. Herein, perpendicularly oriented BCP thin films with a χ eff value of 0.45 were fabricated using simple spin-coating and thermal annealing processes under ambient conditions. The thin films displayed a minimum domain size of L 0 = 11 nm, as observed via atomic force microscopy (AFM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Furthermore, directed self-assembly (DSA) of the BCP on a topographically prepatterned substrate using the grapho-epitaxy method was used to successfully obtain perpendicularly oriented lamellae with a half pitch size of ca. 8 nm.

Laser spike annealing was applied to PS-b-PDMS diblock copolymers to induce short-time (millisecond time scale), high-temperature (300 to 700 °C) microphase segregation and directed self-assembly of sub-10 nm features. Conditions were identified that enabled uniform microphase separation in the time frame of tens of milliseconds. Microphase ordering improved with increased temperature and annealing time, whereas phase separation contrast was lost for very short annealing times at high temperature. PMMA brush underlayers aided ordering under otherwise identical laser annealing conditions. Good long-range order for sub-10 nm cylinder morphology was achieved using graphoepitaxy coupled with a 20 ms dwell laser spike anneal above 440 °C.

Continuous ongoing development of dense integrated circuits requires significant advancements in nanoscale patterning technology. As a key process in semiconductor high volume manufacturing (HVM), high resolution lithography is crucial in keeping with Moore's law. Currently, lithography technology for the sub-7 nm node and beyond has been actively investigated approaching atomic level patterning. EUV technology is now considered to be a potential alternative to HVM for replacing in some cases ArF immersion technology combined with multi-patterning. Development of innovative resist materials will be required to improve advanced fabrication strategies. In this article, advancements in novel resist materials are reviewed to identify design criteria for establishment of a next generation resist platform. Development strategies and the challenges in next generation resist materials are summarized and discussed.

Polymers with a triggered decomposition are attractive for an array of applications ranging from patterning to transient packaging materials, as well as for environmental protection. This work showed for the first time UV and thermally triggered transience in fiber mats using poly(propylene carbonate) (PPC) composites. The electrospun PPC-composite fiber mats combine excellent decomposition performance (because of the high surface to volume ratio) with high stiffness and thus represent a new class of materials enabling innovative applications, such as transient filter materials and short-time plant protection materials, as well as temporary lightweight materials for aerospace engineering. Thermally and UV-triggerable additives (protected acids or base) have been used in different concentrations to tune the transience performance of the fiber mats over a wide range (75-212 °C). The addition of organo-modified clay (OMMT) enhanced mechanical stability and prevented shrinkage at room temperature. Different annealing methods have been used to improve the mechanical properties even further (tensile strength = 2-12 MPa, Young's modulus = 55-747 MPa) making these fiber mats attractive for a broad field of applications. An Ashby plot of Young's modulus versus degradation temperature for electrospun fiber mats is shown, revealing much lower degradation temperatures with higher moduli for PPC composites compared to other electrospun polymers.

A set of controlled surface composition films was produced utilizing amphiphilic block copolymers dispersed in a cross-linked poly(dimethylsiloxane) network. These block copolymers contained oligo(ethylene glycol) (PEGMA) and fluoroalkyl (AF6) side chains in selected ratios and molecular weights to control surface chemistry including antifouling and fouling-release performance. Such properties were assessed by carrying out assays using two algae, the green macroalga Ulva linza (favors attachment to polar surfaces) and the unicellular diatom Navicula incerta (favors attachment to nonpolar surfaces). All films performed well against U. linza and exhibited high removal of attached sporelings (young plants) under an applied shear stress, with the lower molecular weight block copolymers being the best performing in the set. The composition ratios from 50:50 to 60:40 of the AF6/PEGMA side groups were shown to be more effective, with several films exhibiting spontaneous removal of the sporelings. The cells of N. incerta were also removed from several coating compositions. All films were characterized by surface techniques including captive bubble contact angle, atomic force microscopy, and near edge X-ray absorption fine structure spectroscopy to correlate surface chemistry and morphology with biological performance.

The stability of strong polyelectrolyte brushes (PEBs) was studied in bulk and in patterned structures. Thick PEBs of poly([(2-methacryloyloxy)ethyl]trimethylammonium chloride) with thicknesses >100 nm were synthesized using single electron transfer living radical polymerization. Brush patterning was identified using deep-ultraviolet photolithography by means of either a top-down (TD) or bottom-up (BU) method, with features as small as 200 nm. The brushes were soaked in water under a range of pH or temperature conditions, and the hydrolysis was monitored through dry-state ellipsometry and atomic force microscopy measurements. BU patterns showed reduced degrafting for smaller patterns, which was attributed to increased stress relaxation at such dimensions. In contrast to the already relaxed BU-patterned brush, a TD-patterned brush possesses perpendicular structures that result from the use of orthogonal lithography. It was found that the TD process induces cross-linking on the sidewall, which subsequently fortifies the sidewall materials. This modification of the polymer brushes hindered the stress relaxation of the patterns, and the degrafting trends became irrelevant to the pattern sizes. With proper tuning, the cross-linking on the sidewall was minimized and the degrafting trends were again relaxation-dependent.

Block copolymer (BCP) self-assembly is expected to complement conventional optical lithography for the fabrication of next-generation microelectronic devices. In this regard, silicon-containing BCPs with a high Flory-Huggins interaction parameter (χ) are extremely appealing because they form high-resolution nanostructures with characteristic dimensions below 10 nm. However, due to their slow self-assembly kinetics and low thermal stability, these silicon-containing high-χ BCPs are usually processed by solvent vapor annealing or in solvent-rich ambient at a low annealing temperature, significantly increasing the complexity of the facilities and of the procedures. In this work, the self-assembly of cylinder-forming polystyrene-block-poly(dimethylsiloxane-random-vinylmethylsiloxane) (PS-b-P(DMS-r-VMS)) BCP on flat substrates is promoted by means of a simple thermal treatment at high temperatures. Homogeneous PS-b-P(DMS-r-VMS) thin films covering the entire sample surface are obtained without any evidence of dewetting phenomena. The BCP arranges in a single layer of cylindrical P(DMS-r-VMS) nanostructures parallel-oriented with respect to the substrate. By properly adjusting the surface functionalization, the heating rate, the annealing temperature, and the processing time, one can obtain correlation length values larger than 1 μm in a time scale fully compatible with the stringent requirements of the microelectronic industry.

Block copolymers made from a poly(dimethyl siloxane) (Si) and a poly(meth)acrylate carrying oxyethylene (EG) or fluoroalkyl (AF) side chains were synthesized and incorporated as surface-active components into a silicone matrix to produce cross-linked films with different surface hydrophilicity/phobicity. Near-edge X-ray absorption fine structure (NEXAFS) studies showed that film surfaces containing Si-EG were largely populated by the siloxane, with the oxyethylene chains present only to a minor extent. In contrast, the fluorinated block was selectively segregated to the polymer-air interface in films containing Si-AF as probed by NEXAFS and X-ray photoelectron spectroscopy (XPS) analyses. Such differences in surface composition were reflected in the biological performance of the coatings. While the films with Si-EG showed a higher removal of both Ulva linza sporelings and Balanus amphitrite juveniles than the silicone control, those with Si-AF exhibited excellent antifouling properties, preventing the settlement of cyprids of B. amphitrite.

We report indomethacin as a photoresist that can be dry-deposited (as well as spin-coated), and developed in weak aqueous base. This is the first reported patterning of indomethacin as a resist material. Nanometer-scale patterns were achieved through DUV photolithography and the underlying patterning mechanism was investigated.

Heterogeneous polymer brushes on surfaces can be easily formed from a binary initiator on a silicon oxide substrate where two different types of polymers can be grown side-by-side. Herein, we designed a new Y-shaped binary initiator using straightforward chemistry for "grafting from" polymer brushes. This initiator synthesis takes advantage of the Passerini reaction, a multicomponent reaction combining two initiator sites and one surface linking site. This Y-shaped binary initiator can be synthesized in three steps with a higher yield than other similar initiators reported in the literature, and can be performed on a multigram scale. We were able to attach the initiator to a silicon oxide substrate and successfully grow polymer brushes from both initiators (separately and in combination), confirmed by NEXAFS, AFM, and contact angle.

Thin films of block copolymers are extremely attractive for nanofabrication because of their ability to form uniform and periodic nanoscale structures by microphase separation. One shortcoming of this approach is that to date the design of a desired equilibrium structure requires synthesis of a block copolymer de novo within the corresponding volume ratio of the blocks. In this work, we investigated solvent vapor annealing in supported thin films of poly(2-hydroxyethyl methacrylate)- block -poly(methyl methacrylate) [PHEMA- b -PMMA] by means of grazing incidence small angle X-ray scattering (GISAXS). A spin-coated thin film of lamellar block copolymer was solvent vapor annealed to induce microphase separation and improve the long-range order of the self-assembled pattern. Annealing in a mixture of solvent vapors using a controlled volume ratio of solvents (methanol, MeOH, and tetrahydrofuran, THF), which are chosen to be preferential for each block, enabled selective formation of ordered lamellae, gyroid, hexagonal or spherical morphologies from a single block copolymer with a fixed volume fraction. The selected microstructure was then kinetically trapped in the dry film by rapid drying. To our knowledge, this paper describes the first reported case where in-situ methods are used to study the transition of block copolymer films from one initial disordered morphology to four different ordered morphologies, covering much of the theoretical diblock copolymer phase diagram.

Self-consistent field theory is used to model the self-assembly of a symmetric PMMA-block-PHEMA in the presence of two solvents, methanol and tetrahydrofuran (THF). The model predictions are compared to our experimental results of solvent-vapour annealing of thin polymer films, where the sequence of cylinder to gyroid (or micelles) to lamellar phases was found upon increasing the methanol-THF ratio and for particular extents of film swelling. The Hansen solubility parameters are used to estimate the Flory-Huggins interaction parameters (χ) needed in the theoretical model. However, because enacting the experimental range of high (χ)N values is computationally prohibitive, the use of moderate (χ)N values is compensated by employing larger values of the solvent-to-polymer size ratio (α). This approach is validated by showing that the predicted phase diagrams exhibit qualitatively similar trends whether (χ)N or α is increased. Using such an approach, the theory predicts a cylinder to gyroid to lamellar transition on increasing the THF-methanol ratio, a trend consistent with that observed in the experiments.

Acid-catalyzed, thermally activated ester cleavage reactions are critical for lithographic patterning processes used in the semiconductor industry. The rates of these high-temperature reactions within polymer thin films are difficult to characterize because of the thermal instability of many polymers and a lack of temperature-resolved measurement techniques. Here we introduce the use of transient laser irradiation to heat a methyladamantane-protected acrylate copolymer to 600 °C in less than a millisecond. These conditions mediate the removal of the protecting groups and enable accurate kinetic measurements. At sub-millisecond exposure to high temperatures (∼600 °C), the rate of the ester cleavage reaction exhibits the expected first-order dependence on acid concentration. In contrast, the reaction exhibits more complex kinetics when the polymer film is heated to lower temperatures (115 °C) on a conventional hot-plate. We identify distinct methyladamantane-derived deprotection products under the high- and low-temperature conditions that are consistent with the observed rate differences. The acid-catalyzed dimerization of 1-methyleneadamantane occurs at low temperature, which reduces the acid concentration available for the ester cleavage. This dimerization reaction is minimized during transient laser-induced heating because bimolecular reactions are disfavored under these conditions. We constructed a mathematical model based on these observations that accounts for the competition for the catalyst between the dimerization and ester cleavage processes. This laser-induced, sub-millisecond heating technique provides a means to probe and model temperature and time regimes of thermally activated reactions in polymer films, and these regimes exhibit distinct and advantageous reaction pathways that will inform future advances in high-performance photolithography.

Thin-film composite (TFC) polyamide reverse osmosis (RO) membranes are prone to biofouling due to their inherent physicochemical surface properties. In order to address the biofouling problem, we have developed novel surface coatings functionalized with biocidal silver nanoparticles (AgNPs) and antifouling polymer brushes via polyelectrolyte layer-by-layer (LBL) self-assembly. The novel surface coating was prepared with polyelectrolyte LBL films containing poly(acrylic acid) (PAA) and poly(ethylene imine) (PEI), with the latter being either pure PEI or silver nanoparticles coated with PEI (Ag-PEI). The coatings were further functionalized by grafting of polymer brushes, using either hydrophilic poly(sulfobetaine) or low surface energy poly(dimethylsiloxane) (PDMS). The presence of both LBL films and sulfobetaine polymer brushes at the interface significantly increased the hydrophilicity of the membrane surface, while PDMS brushes lowered the membrane surface energy. Overall, all surface modifications resulted in significant reduction of irreversible bacterial cell adhesion. In microbial adhesion tests with E. coli bacteria, a normalized cell adhesion in the range of only 4 to 16% on the modified membrane surfaces was observed. Modified surfaces containing silver nanoparticles also exhibited strong antimicrobial activity. Membranes coated with LBL films of PAA/Ag-PEI achieved over 95% inactivation of bacteria attached to the surface within 1 hour of contact time. Both the antifouling and antimicrobial results suggest the potential of using these novel surface coatings in controlling the fouling of RO membranes.

Infectious diseases, such as influenza, present a prominent global problem including the constant threat of pandemics that initiate in avian or other species and then pass to humans. We report a new sensor that can be specifically functionalized to detect antibodies associated with a wide range of infectious diseases in multiple species. This biosensor is based on electrochemical detection of hydrogen peroxide generated through the intrinsic catalytic activity of all antibodies: the antibody catalyzed water oxidation pathway (ACWOP). Our platform includes a polymer brush-modified surface where specific antibodies bind to conjugated haptens with high affinity and specificity. Hydrogen peroxide provides an electrochemical signal that is mediated by Resorufin/Amplex Red. We characterize the biosensor platform, using model anti-DNP antibodies, with the ultimate goal of designing a versatile device that is inexpensive, portable, reliable, and fast. We demonstrate detection of antibodies at concentrations that fall well within clinically relevant levels.

The ideal marine antifouling (AF)/fouling-release (FR) coating should be non-toxic, while effectively either resisting the attachment of marine organisms (AF) or significantly reducing their strength of attachment (FR). Many recent studies have shown that amphiphilic polymeric materials provide a promising solution to producing such coatings due to their surface dual functionality. In this work, poly(ethylene glycol) (PEG) of different molecular weights (Mw = 350, 550) was coupled to a saturated difunctional alkyl alcohol to generate amphiphilic surfactants (PEG-hydrocarbon-OH). The resulting macromolecules were then used as side chains to covalently modify a pre-synthesized PS8 K-b-P(E/B)25 K-b-PI10 K (SEBI or K3) triblock copolymer, and the final polymers were applied to glass substrata through an established multilayer surface coating technique to prepare fouling resistant coatings. The coated surfaces were characterized with AFM, XPS and NEXAFS, and evaluated in laboratory assays with two important fouling algae, Ulva linza (a green macroalga) and Navicula incerta, a biofilm-forming diatom. The results suggest that these polymer-coated surfaces undergo surface reconstruction upon changing the contact medium (polymer/air vs polymer/water), due to the preferential interfacial aggregation of the PEG segment on the surface in water. The amphiphilic polymer-coated surfaces showed promising results as both AF and FR coatings. The sample with longer PEG chain lengths (Mw = 550 g mol(-1)) exhibited excellent properties against both algae, highlighting the importance of the chemical structures on ultimate biological performance. Besides reporting synthesis and characterization of this new type of amphiphilic surface material, this work also provides insight into the nature of PEG/hydrocarbon amphiphilic coatings, and this understanding may help in the design of future generations of fluorine-free, environmentally friendly AF/FR polymeric coatings.