Search

The article analyzes the causes, results and consequences of economic modernization reforms in Georgia in 2004–2013. The authors examine the starting positions of Georgia’s economy on the eve of reforms and study the main macroeconomic indicators of the country in different periods of its post-Soviet history. The purpose of the research is to identify both the strengths and weaknesses of Georgia’s economic transformation in 2004–2013, and to determine the sustainability of the results achieved. In other words, the question to be answered is whether the post-reform economic system of Georgia was able to withstand the changes in the foreign trade environment (in particular, the fall in prices for Georgia’s main export products – ferroalloys and copper in 2014–2019), and then the economic downturn caused by the COVID-19 pandemic. Having assessed the degree of success and effectiveness of the modernization reforms 2004–2013, the authors conclude that the results were contradictory. On the one hand, the tax reform proved to be highly efficient; significant success was achieved in the privatization of state property (both industry and land), as well as in the expansion of economic rights and freedoms of the population. On the other hand, the anti-corruption measures were only partially successful, as significant results were achieved only at the grassroots level, while systemic corruption (primarily in the higher echelons of government) remained the most serious problem of Georgian society and the state. Similarly, debureaucratization did not affect all sectors of the economy. Thus, while serious progress was registered in the spheres of services, trade and tourism, the debureaucratization and reduction of state regulation in agriculture and industry were less successful.

The Y0.95Gd0.05PO4 phosphate with the xenotime structure has been synthesized in powder form and as ceramics. Ceramics with a relative density of ~99% have been produced by spark plasma sintering. The sintering temperature was 1140°C and the sintering time was ~18 min, without isothermal holding. We have assessed the radiation resistance of the ceramics under irradiation with 132Xe26+ ions and investigated the restoration of the obtained metamict phase to a crystalline one via high-temperature heat treatment. No complete amorphization of the samples has been reached at the fluences used in this study. The calculated critical fluence is (9.2 ± 0.1) × 1014 cm–2, and the calculated latent track radius is ~2.8 nm. Hydrolytic tests have shown that the phosphate under study is stable in water under dynamic conditions. The observed Y and Gd leaching rates were Ri = 1.68 × 10–6 and 1.5 × 10–7 g/(cm2 day), respectively.

Fine-grained SrWO4 and NaNd(WO4)2 ceramics with the scheelite structure having high relative densities (99 and 95.8%), which can appear candidate matrices for radioactive waste (RAW) management, are prepared by spark plasma sintering (SPS). The phase identity of the ceramics is determined by X-ray powder diffraction; their microstructure is studied by X-ray photoelectron spectroscopy. The tungstates under study are sintered at rather low temperatures (580–665°C). The intensity of compaction of the tungstates at the early sintering stage is determined by the degree of powder agglomeration. The activation energy of fine-grained scheelite ceramics at high temperatures corresponds with the activation energy of grain-boundary oxygen diffusion.

Fine-grained ceramics based on solid solutions of ZrO2-x-Ln2O3 (where Ln = Sm, Yb), which are used to simulate inert matrix fuel (IMF), were obtained by colloidal chemical synthesis of powders and their Spark Plasma Sintering (SPS). It has been established that the SPS activation energy (Qs) for fine-grain ceramics based on ZrO2 corresponds to the activation energy of oxygen diffusion on grain boundaries of zirconium oxide (zirconia). We have demonstrated that introducing oxides of samarium (Sm2O3) and ytterbium (Yb2O3) into zirconia decreases SPS activation energy and stabilizes the phase composition of zirconia. Ceramics with densities up to 100% were obtained by the following modes of SPS: sintering temperature 1000–1250 °C, sintering time 6–10 min. Hydrolysis testing in the static mode (Т = 20 °C, P = 1 atm) in distilled water revealed no leaching of lanthanide ions at detection thresholds of 5 ppm for Sm ions and 0.1 ppm for Yb ions.

The paper presents a method for manufacturing mechanically strong sputtering composite targets containing the phase of the Co2FeSi or Co2MnSi Heusler alloy of the stoichiometric composition, which can be used for fabrication of spin electronic devices by high-frequency magnetron deposition and pulsed laser deposition of thin films.

Mineral-like matrix Na x (Ca/Sr) 1-2x Nd x WO 4 ( x = 0, 0.1 and 0.2) for radwaste is proposed. Powder samples of complex tungstates have been synthesized by coprecipitation from aqueous solutions of Na, Ca, Sr, Nd salts. Crystallographic characteristics of compounds have been calculated and a monotonous change observed in them along with some x value changes. Monophasic ceramics with high relative density (97–100%) from these powders have been obtained through Spark Plasma Sintering (SPS). SPS of tungstates has been shown to occur in multiple stages, with the sintering kinetics at the final stage of sealing controlled by diffusion both in the crystal lattice and along grain boundaries. Activation energies have been determined for sintering of tungstates at different x values. The reduced activation energy of sintering at the third heating stage (at high temperatures) could be ascribed to the grain growth.

The paper dwells on the research conducted into high-rate consolidation of pure tungsten carbide (WC) nanopowders using the Spark Plasma Sintering technology. Studies included the effect that the original size of WC nanoparticles and their preparation modes have on density, structure parameters, and mechanical properties of tungsten carbide. Samples of high-density nanostructured tungsten carbide characterized by high hardness (up to 31–34 GPa) and improved fracture toughness (4.3–5.2 MPa m 1/2 ) were obtained. It has been found that materials that show abnormal grain growth during sintering have lower values of sintering activation energy as compared to materials the structure of which is more stable during high-rate heating. A qualitative model is proposed that explains this effect through the dependence of the grain boundary diffusion coefficient on the grain boundary migration rate.

Spark Plasma Sintering studies of the high-speed consolidation of pure tungsten carbide WC nanopowders have been carried out. The influence of the initial size of the WC nanoparticles and modes of their receiption the density, structural parameters, and mechanical properties of tungsten carbide are studied. Samples of high-density nanostructured tungsten carbide with high hardness (up to 31–34 GPa) and an increased crack resistance (4.3–5.2 MPa m1/2) are obtained. It is found that the effect of accelerating tungsten carbide nanopowder sintering under conditions of high-speed heating is associated with the acceleration of diffusion along grain boundaries in the sintered material. It is shown that the nonmonotonic dependence of the optimal sintering temperature on the initial grain size is caused by a change in grain-boundary diffusion coefficient in conditions of abnormal grain growth. It is found that the size of abnormally large grains in spark plasma sintering depends on the volume fraction of particles of the nonstoichiometric phase.

Ultrafine-grained (UFG) tungsten carbide (WC) samples with high hardness (up to 34 GPa) and increased cracking resistance have been obtained by the method of spark plasma sintering (SPS). Initial powders have been prepared by two-stage plasmachemical synthesis. The influence of the initial size of WC nanoparticles on the density, structural parameters, and mechanical properties of UFG tungsten carbide obtained by SPS has been studied. It is established that the phenomenon of accelerated sintering of WC powder is related to enhanced grain-boundary diffusion.

The paper dwells on the research conducted into high-rate consolidation of pure tungsten carbide nanopowders using the Spark Plasma Sintering. Studies included the effect that the original size of WC nanoparticles and their preparation modes have on density, structure parameters, and mechanical properties of tungsten carbide. It has been found that materials that show abnormal grain growth during sintering have lower values of sintering activation energy as compared to materials the structure of which is more stable during high-rate heating. A qualitative model is proposed that explains this effect through the dependence of the grain boundary diffusion coefficient on the grain boundary migration rate.