Search

The Keima family comprises large Stokes shift fluorescent proteins that are useful for dual-color fluorescence cross-correlation spectroscopy and multicolor imaging. The tKeima is a tetrameric large Stokes shift fluorescent protein and serves as the ancestor fluorescent protein for both dKeima and mKeima. The spectroscopic properties of tKeima have been previously reported; however, its structural basis and molecular properties have not yet been elucidated. In this study, we present the crystallographic results of the large Stokes shift fluorescent protein tKeima. The purified tKeima protein spontaneously crystallized after purification without further crystallization. The crystal structure of tKeima was determined at 3.0 Å resolution, revealing a β-barrel fold containing the Gln-Tyr-Gly chromophores mainly with cis-conformation. The tetrameric interfaces of tKeima were stabilized by numerous hydrogen bonds and salt–bridge interactions. These key residues distinguish the substituted residues in dKeima and mKeima. The key structure-based residues involved in the tetramer formation of tKeima provide insights into the generation of a new type of monomeric mKeima. This structural analysis expands our knowledge of the Keima family and provides insights into its protein engineering. [ABSTRACT FROM AUTHOR]

β-glucosidase (Bgl) hydrolyzes cellobiose to glucose, thereby releasing non-reducing terminal glucosyl residues. Bgl is an essential enzyme belonging to the biomass-degrading enzyme family, which plays a vital role in enzymatic saccharification during biofuel production. The four loops above the Bgl substrate-binding pocket undergo a conformational change upon substrate recognition. However, the structural dynamism of this loop and how it is conserved among Bgl family members remain unknown. Herein, to better understand the four loops above the substrate-binding pocket of Bgl, four Bgl crystal structures in Thermoanaerobacterium saccharolyticum (TsaBgl) were determined at 1.5–2.1 Å. The L1, L2, and L4 loops of TsaBgl showed a rigid conformation stabilized by their neighboring residues via hydrogen bonds and hydrophobic interactions. The TsaBgl L3 loop showed relatively high flexibility and two different N-terminal region conformations. The conformational change in the TsaBgl L3 loop induced a change in charge and shaped at the substrate-binding pocket entrance. The amino acid sequences and structures of the TsaBgl L1–4 loops were compared with other 45 Bgl proteins, and a diversity of the L2 and L3 loops was observed. Differences in amino acids and lengths of Bgls L2–L3 loop induced differences in the conformation and structure of the Bgls substrate-binding pocket entrance. These findings expand our knowledge on the molecular function of the loops in the Bgl enzyme family. [ABSTRACT FROM AUTHOR]

Glucose isomerase (GI) is extensively used in the food industry for production of high-fructose corn syrup and for the production of biofuels and other renewable chemicals. Structure-based studies on GI inhibitors are important for improving its efficiency in industrial applications. Here, we report the subatomic crystal structure of Streptomyces rubiginosus GI (SruGI) complexed with its inhibitor, xylitol, at 0.99 Å resolution. Electron density map and temperature factor analysis showed partial binding of xylitol to the M1 metal binding site of SruGI, providing two different conformations of the metal binding site and the substrate binding channel. The xylitol molecule induced a conformational change in the M2 metal ion-interacting Asp255 residue, which subsequently led to a conformational change in the side chain of Asp181 residue. This led to the positional shift of Pro25 by 1.71 Å and side chain rotation of Phe26 by 21°, where located on the neighboring protomer in tetrameric SruGI. The conformation change of these two residues affect the size of the substrate-binding channel of GI. Therefore, xylitol binding to M1 site of SruGI induces not only a conformational changes of the metal-binding site, but also conformational change of substrate-binding channel of the tetrameric SruGI. These results expand our knowledge about the mechanism underlying the inhibitory effect of xylitol on GI. • The subatomic structure of S. rubiginosus glucose isomerase complexed with xylitol was determined. • Xylitol induces conformational changes in the M2 metal ion-interacting residues. • Xylitol induces conformational changes in the substrate binding channel. • Partial binding of xylitol to the M1 metal binding site of SruGI showed two different conformations. [ABSTRACT FROM AUTHOR]

Marine algae produce complex polysaccharides, which can be degraded by marine heterotrophic bacteria utilizing carbohydrate-active enzymes. The red algal polysaccharide porphyran contains the methoxy sugar 6-O-methyl-d-galactose (G6Me). In the degradation of porphyran, oxidative demethylation of this monosaccharide towards d-galactose and formaldehyde occurs, which is catalyzed by a cytochrome P450 monooxygenase and its redox partners. In direct proximity to the genes encoding for the key enzymes of this oxidative demethylation, genes encoding for zinc-dependent alcohol dehydrogenases (ADHs) were identified, which seem to be conserved in porphyran utilizing marine Flavobacteriia. Considering the fact that dehydrogenases could play an auxiliary role in carbohydrate degradation, we aimed to elucidate the physiological role of these marine ADHs. Although our results reveal that the ADHs are not involved in formaldehyde detoxification, a knockout of the ADH gene causes a dramatic growth defect of Zobellia galactanivorans with G6Me as a substrate. This indicates that the ADH is required for G6Me utilization. Complete biochemical characterizations of the ADHs from Formosa agariphila KMM 3901T (FoADH) and Z. galactanivorans DsijT (ZoADH) were performed, and the substrate screening revealed that these enzymes preferentially convert aromatic aldehydes. Additionally, we elucidated the crystal structures of FoADH and ZoADH in complex with NAD+ and showed that the strict substrate specificity of these new auxiliary enzymes is based on a narrow active site. Key points: • Knockout of the ADH-encoding gene revealed its role in 6-O-methyl-D-galactose utilization, suggesting a new auxiliary activity in marine carbohydrate degradation. • Complete enzyme characterization indicated no function in a subsequent reaction of the oxidative demethylation, such as formaldehyde detoxification. • These marine ADHs preferentially convert aromatic compounds, and their strict substrate specificity is based on a narrow active site. [ABSTRACT FROM AUTHOR]

The enzymatic degradation of semi‐cellulosic substrates has recently received immense attention. The enzyme endo‐1,4‐β‐xylanase is essential for the complete digestion of complex and heterogeneous hemicellulose. Here, the purification, crystallization and preliminary X‐ray free‐electron laser (XFEL) diffraction analysis of endo‐1,4‐β‐xylanase from the fungus Hypocrea virens (HviGH11) are reported. Codon‐optimized HviGH11 was overexpressed in Escherichia coli and spontaneously crystallized after His‐tag purification and concentration. Preliminary XFEL diffraction data were collected at the Pohang Accelerator Laboratory XFEL (PAL‐XFEL). A total of 1021 images containing Bragg peaks were obtained and indexed. The HviGH11 crystals belonged to the orthorhombic space group P212121, with unit‐cell parameters a = 43.80, b = 51.90, c = 94.90 Å. Using 956 diffraction patterns, the phasing problem was solved and an initial model structure of HviGH11 was obtained. [ABSTRACT FROM AUTHOR]

Serial crystallography (SX) enables the visualization of the time-resolved molecular dynamics of macromolecular structures at room temperature while minimizing radiation damage. In SX experiments, the delivery of a large number of crystals into an X-ray interaction point in a serial and stable manner is key. Sample delivery using viscous medium maintains the stable injection stream at low flow rates, markedly reducing sample consumption compared with that of a liquid jet injector and is widely applied in SX experiments with low repetition rates. As the sample properties and experimental environment can affect the stability of the injection stream of a viscous medium, it is important to develop sample delivery media with various characteristics to optimize the experimental environment. In this study, a beef tallow injection matrix possessing a higher melting temperature than previously reported fat-based shortening and lard media was introduced as a sample delivery medium and applied to SX. Beef tallow was prepared by heat treating fats from cattle, followed by the removal of soluble impurities from the extract by phase separation. Beef tallow exhibited a very stable injection stream at room temperature and a flow rate of < 10 nL/min. The room-temperature structures of lysozyme and glucose isomerase embedded in beef tallow were successfully determined at 1.55 and 1.60 Å, respectively. The background scattering of beef tallow was higher than that of previously reported fat-based shortening and lard media but negligible for data processing. In conclusion, the beef tallow matrix can be employed for sample delivery in SX experiments conducted at temperatures exceeding room temperature. [ABSTRACT FROM AUTHOR]

Endo-β-1,4-xylanases degrade heteroxylans that constitute the lignocellulosic plant cell wall. This enzyme is widely used in the food, paper, textile, and biorefinery industries. Temperature affects the optimum activity of xylanase and is an important factor in its application. Various structural analyses of xylanase have been performed, but its structural influence by temperature is not fully elucidated. To better understand the structural influence of xylanase due to temperature, the crystal structure of xylanase II from Trichoderma longibrachiatum (TloXynII) at room and cryogenic temperatures was determined at 2.1 and 1.9 Å resolution, respectively. The room-temperature structure of TloXynII (TloXynIIRT) showed a B-factor value 2.09 times higher than that of the cryogenic-temperature structure of TloXynII (TloXynIICryo). Subtle movement of the catalytic and substrate binding residues was observed between TloXynIIRT and TloXynIICryo. In TloXynIIRT, the thumb domain exhibited high flexibility, whereas in TloXynIICryo, the finger domain exhibited high flexibility. The substrate binding cleft of TloXynIIRT was narrower than that of TloXynIICryo, indicating a distinct finger domain conformation. Numerous water molecule networks were observed in the substrate binding cleft of TloXynIICryo, whereas only a few water molecules were observed in TloXynIIRT. These structural analyses expand our understanding of the temperature-dependent conformational changes in xylanase. [Display omitted] • The crystal structures of TloXynII at room and cryogenic temperatures were determined. • TloXynIIRT and TloXynIICryo exhibited different conformations for the catalytic and substrate-binding residues. • The substrate-binding cleft of TloXynIIRT was narrower than that of TloXynIICryo. • TloXynIIRT showed a B-factor value that was 2.09 times higher than that of TloXynIICryo. • The regions of higher flexibility differed between TloXynIIRT and TloXynIICryo. [ABSTRACT FROM AUTHOR]

β-glucosidases (Bgls) are glycosyl hydrolases that catalyze the conversion of cellobiose or glucosyl-polysaccharide into glucose. Bgls are widely used in industry to produce bioethanol, wine and juice, and feed. Tris (tris(hydroxymethyl)aminomethane) is an organic compound that can inhibit the hydrolase activity of some Bgls, but the inhibition state and selectivity have not been fully elucidated. Here, three crystal structures of Thermoanaerobacterium saccharolyticum Bgl complexed with the Tris molecule were determined at 1.55–1.95 Å. The configuration of Tris binding to TsaBgl remained consistent across three crystal structures, and the amino acids interacting with the Tris molecule were conserved across Bgl enzymes. The positions O1 and O3 atoms of Tris exhibit the same binding moiety as the hydroxyl group of the glucose molecule. Tris molecules are stably positioned at the glycone site and coordinate with surrounding water molecules. The Tris-binding configuration of TsaBgl is similar to that of HjeBgl, HgaBgl, ManBgl, and KflBgl, but the arrangement of the water molecule coordinating Tris at the aglycone site differs. Meanwhile, both the arrangement of Tris and the water molecules in ubBgl, NkoBgl, and SfrBgl differ from those in TsaBgl. The binding configuration and affinity of the Tris molecule for Bgl may be affected by the residues on the aglycone and gatekeeper regions. This result will extend our knowledge of the inhibitory effect of Tris molecules on TsaBgl. • Three crystal structures of Tris-bound T. saccharolyticum Bgl were determined. • Tris binding to the glycone site is stabilized by conserved active site residues and water interactions. • The similarities and differences in the Tris-binding configuration among various Bgl structures were analyzed. • Nonconserved aglycone and gatekeeper sites of Bgl may be involved in the recognition of Tris molecules. [ABSTRACT FROM AUTHOR]

Understanding the enzyme reaction mechanism is important for identifying fundamental biochemical processes and for providing invaluable information for enzyme engineering for industrial applications. Serial femtosecond crystallography (SFX) enables determination structure of enzymes without radiation damage at room temperature. Time-resolved SFX with ligand mixing provides a molecular movie of enzyme reactions, including the transition states. This structural information provides insight into previously undiscovered molecular dynamics over various time periods. To observe enzyme reactions with SFX, it is essential to comprehend the device used for mixing the protein crystals and reaction solutions, as well as the mixing efficiency and available time delay provided by this equipment. In this review, we summarize the current mixing techniques for time-resolved SFX. We describe the configuration and experimental setup of the SFX sample environment unique to each experimental technique and discuss the technical possibilities and limitations of these techniques for performing time-resolved crystallography. • Time-resolved mixing SFX experiments for enzyme reactions are explained. • Mixing devices and time-resolved mixing SFX results are summarized. • Potential available mixing devices for time-resolved SFX are discussed. • The possibilities and limitations of time-resolved mixing SFX are discussed. [ABSTRACT FROM AUTHOR]

Serial crystallography (SX) provides room‐temperature crystal structures with minimal radiation damage and facilitates the comprehension of molecular dynamics through time‐resolved studies. In SX experiments, it is important to deliver a large number of crystal samples to the X‐ray interaction point in a serial and stable manner. The advantage of crystal delivery in a viscous medium via a capillary is the ability to deliver all of the crystal samples to the X‐ray interaction point at a low flow rate; however, the capillary often breaks during handling and high X‐ray absorption can occur at low energy states. This study aimed to develop a stable system for sample delivery in a viscous medium via a polyimide‐based single‐channel microfluidic (PSM) chip for SX. Since this microfluidic chip comprises a polyimide film, it has high tensile strength and higher X‐ray transmittance than a quartz capillary. The PSM chip was connected to a syringe containing the microcrystals embedded in viscous medium. The channel of the PSM chip was aligned to the X‐ray path, and the viscous medium containing lysozyme crystals was stably delivered using a syringe pump at a flow rate of 100 nl min−1. Room‐temperature lysozyme crystal structures were successfully determined at 1.85 Å resolution. This method would greatly facilitate sample delivery for SX experiments using synchrotron X‐rays. [ABSTRACT FROM AUTHOR]

The brain‐type fatty acid‐binding protein FABP7, which is expressed in astrocytes and neural progenitors, is a member of the intracellular lipid‐binding protein family. This protein is not only involved in various cellular functions such as metabolism, inflammation and energy homeostasis, but also in diseases such as cognitive disorders and tumors. Structures of unsaturated fatty acids, such as oleic acid (OA) and docosahexaenoic acid (DHA), bound to FABP7 have been elucidated; however, structures of saturated fatty acids bound to FABP7 remain unknown. To better understand fatty acid recognition, here the crystal structure of human brain‐type fatty acid‐binding protein FABP7 complexed with palmitic acid (PA), a saturated fatty acid, is reported at a resolution of 1.6 Å. The PA bound to the fatty acid‐binding pocket of FABP7 assumed a U‐shaped conformation. The carboxylate moiety of PA interacted with Tyr129, Arg127 and, via a water bridge, with Arg107 and Thr54, whereas its aliphatic chain was stabilized by hydrophobic interactions with Met21, Leu24, Thr30, Thr37, Pro39, Phe58 and Asp77. Structural comparison showed that PA, OA and DHA exhibited unique binding conformations in the fatty acid‐binding pocket, stabilized by distinct amino‐acid interactions. The binding of PA to FABP7 exhibits a unique binding conformation when compared with other human FABPs (FABP3–FABP5 and FABP8) expressed in other tissues. Based on the crystal and fatty acid structures, it was suggested that PA, which prefers a linear form in nature, required a greater conformational change in its aliphatic chain to bind to the fatty acid‐binding pocket in a U‐shaped conformation, compared with the cis configurations of OA or DHA. This, together with the length of the aliphatic chain, was considered to be one of the factors determining the binding affinity of PA to FABP7. These results provide a better understanding of fatty acid recognition by FABP7 and expand the knowledge of the binding of PA to FABPs. [ABSTRACT FROM AUTHOR]

Serial crystallography (SX) using X-ray free-electron lasers or synchrotron X-rays is an emerging technique for determining the room-temperature structure of macro- and small-molecules [[9]]. Molecular dynamics are observed in all molecules, from small molecules to macromolecules, and provide information about their intrinsic structure in a spatiotemporal context within a specific environment. All natural molecules have their own physical, chemical, or biological properties and functions. [Extracted from the article]

The serial crystallography (SX) technique enables the determination of the room-temperature structure of a macromolecule while causing minimal radiation damage, as well as the visualization of the molecular dynamics by time-resolved studies. The fixed-target (FT) scanning approach is one method for SX sample delivery that minimizes sample consumption and minimizes physical damage to crystals during data collection. Settling of the crystals on the sample holder in random orientation is important for complete three dimensional data collection. To increase the random orientation of crystals on the sample holder, we developed a polyimide mesh-based sample holder with irregular crystal mounting holes for FT-SX. The polyimide mesh was fabricated using a picosecond laser. Each hole in the polyimide mesh has irregularly shaped holes because of laser thermal damage, which may cause more crystals to settle at random orientations compared to regular shaped sample holders. A crystal sample was spread onto a polyimide-mesh, and a polyimide film was added to both sides to prevent dehydration. Using this sample holder, FT-SX was performed at synchrotron and determined the room-temperature lysozyme structure at 1.65 Å. The polyimide mesh with irregularly shaped holes will allow for expanded applications in sample delivery for FT-SX experiments. [ABSTRACT FROM AUTHOR]

Glucose/xylose isomerase catalyzes the reversible isomerization of d-glucose and d-xylose to d-fructose and d-xylulose, respectively. This enzyme is not only involved in sugar metabolism but also has industrial applications, such as in the production of high fructose corn syrup and bioethanol. Various crystal structures of glucose isomerase have shown the binding configuration of the substrate and its molecular mechanism; however, the metal binding mechanism required for the isomerization reaction has not been fully elucidated. To better understand the functional metal binding, the crystal structures of the metal-bound and metal-free states of Streptomyces rubiginosus glucose isomerase (SruGI) were determined at 1.4 Å and 1.5 Å resolution, respectively. In the meal-bound state of SruGI, Mg2+ is bound at the M1 and M2 sites, while in the metal-free state, these sites are occupied by water molecules. Structural comparison between the metal binding sites of the metal-bound and metal-free states of SruGI revealed that residues Glu217 and Asp257 exhibit a rigid configuration at the bottom of the metal binding site, suggesting that they serve as a metal-binding platform that defined the location of the metal. In contrast, the side chains of Glu218, His220, Asp255, Asp257, and Asp287 showed configuration changes such as shifts and rotations. Notably, in the metal-free state, the side chains of these amino acids are shifted away from the metal binding site, indicating that the metal-binding residues exhibit a minimal open configuration, which allows metal binding without large conformational changes. Image 1 • The crystal structures of metal-bound and metal-free SruGI were determined • Glu217 and Asp257 exhibit rigid configurations and define the location of the metal • Metal-free state exhibits the minimal open configuration of the metal-binding site • A mechanism for the functional metal binding of SruGI was proposed [ABSTRACT FROM AUTHOR]

Serial crystallography (SX) is an innovative technology in structural biology that enables the visualization of the molecular dynamics of macromolecules at room temperature. SX experiments always require a considerable amount of effort to deliver a crystal sample to the X‐ray interaction point continuously and reliably. Here, a sample‐delivery method using a capillary and a delivery medium is introduced. The crystals embedded in the delivery medium can pass through the capillary tube, which is aligned with the X‐ray beam, at very low flow rates without requiring elaborate delivery techniques, drastically reducing sample consumption. In serial millisecond crystallography using a viscous medium via a capillary, crystals of lysozyme embedded in agarose, which produce an unstable injection stream at atmospheric pressure, and crystals of glucose isomerase embedded in gelatin, which is known to be problematic for open‐extruder operation, were stably delivered at a flow rate of 100 nl min−1. The room‐temperature crystal structures of lysozyme and glucose isomerase were successfully determined at 1.85 and 1.70 Å resolutions, respectively. This simple but highly efficient sample‐delivery method can allow researchers to deliver crystals precisely to an X‐ray beam in SX experiments. [ABSTRACT FROM AUTHOR]

Serial crystallography allows crystal structures to be determined at room temperature through the steady delivery of crystals to the X-ray interaction point. Viscous delivery media are advantageous because they afford efficient sample delivery from an injector or syringe at a low flow rate. Hydrophobic delivery media, such as lipidic cubic phase (LCP) or grease, provide a stable injection stream and are widely used. The development of new hydrophobic delivery materials can expand opportunities for future SX studies with various samples. Here, I introduce fat-based shortening as a delivery medium for SX experiments. This material is commercially available at low cost and is straightforward to handle because its phase (i.e., solid or liquid) can be controlled by temperature. Shortening was extruded from a syringe needle in a stable injection stream even below 200 nl/min. X-ray exposed shortening produced several background scattering rings, which have similar or lower intensities than those of LCP and contribute negligibly to data processing. Serial millisecond crystallography was performed using two shortening delivery media, and the room temperature crystal structures of lysozyme and glucose isomerase were successfully determined at resolutions of 1.5–2.0 Å. Therefore, shortening can be used as a sample delivery medium in SX experiments. [ABSTRACT FROM AUTHOR]

Sample delivery using injectors is widely used in serial crystallography (SX) and has significantly contributed to the determination of crystal structures at room temperature. However, sophisticated injector nozzle fabrication methods and sample delivery operations have made it difficult for ordinary users to access the SX research. Herein, a simple and easily accessible sample delivery method for SX experiments is introduced, that uses a viscous medium, commercially available syringe and syringe pump. The syringe containing the lysozyme crystals embedded in lipidic cubic phase (LCP) or polyacrylamide (PAM) delivery media was connected to a needle having an inner diameter of 168 µm, after which it was installed on a syringe pump. By driving the syringe pump, the syringe plunger was pushed and the crystal sample was delivered to the X‐ray beam position in a stable manner. Using this system, the room‐temperature crystal structures of lysozyme embedded in LCP and PAM at 1.56 Å and 1.75 Å, respectively, were determined. This straightforward syringe pump‐based sample delivery system can be utilized in SX. [ABSTRACT FROM AUTHOR]

• The large-scale crystal growth during microtube batch crystallization was monitored. • Highly concentrated lysozyme immediately formed random-sized aggregates. • The nucleation and crystal growth started from the aggregation area. • The crystal quality was verified by room-temperature serial crystallography experiment. Serial crystallography (SX) enable to visualize the molecular dynamics of macromolecule at room temperature with minimal radiation damage. Large-scale batch crystallization method is widely applied for the SX sample preparation, but the simultaneous growth of multiple crystals in the batch is not well-studied. In this study, we report the real-time monitoring of large-scale crystal growth during batch crystallization using the protein lysozyme. Highly concentrated lysozyme immediately formed random-sized aggregates upon mixing with the crystallization solution. The nucleation and crystal growth started from the aggregation area. In regions with high aggregation density, the size of initially grown crystals increased rather than further nucleation and crystal formation. The qualities of the crystals obtained from the large-scale batch crystallization method were verified by serial synchrotron crystallography, which determined the room-temperature structure of lysozyme at 1.6 Å. Based on the activation energy and nucleation barrier, our results indicate that a high concentration of lysozyme initially forms non-specific aggregates, a process that involves nucleation from non-specific aggregates. Then, the nonspecifically aggregated proteins nucleate to form crystals that grow into larger crystals. The findings of this study provide a better understanding of the phenomenon of a large number of crystal growths in large-scale batch crystallization. [ABSTRACT FROM AUTHOR]

CRISPR drives prokaryotic adaptation to invasive nucleic acids such as phages and plasmids, using an RNA-mediated interference mechanism. Interference in type I CRISPR-Cas systems requires a targeting Cascade complex and a degradation machine, Cas3, which contains both nuclease and helicase activities. Here we report the crystal structures of Thermobifida fusca Cas3 bound to single-stranded (ss) DNA substrate and show that it is an obligate 3′-to-5′ ssDNase that preferentially accepts substrate directly from the helicase moiety. Conserved residues in the HD-type nuclease coordinate two irons for ssDNA cleavage. We demonstrate ATP coordination and conformational flexibility of the SF2-type helicase domain. Cas3 is specifically guided toward Cascade-bound target DNA by a PAM sequence, through physical interactions with both the nontarget substrate strand and the CasA protein. The sequence of recognition events ensures well-controlled DNA targeting and degradation of foreign DNA by Cascade and Cas3. [ABSTRACT FROM AUTHOR]

The resistance switching characteristics of resistive random access memory (ReRAM) based on amorphous GeSe thin films have been demonstrated by using Al/Ag2Se/GeSe/Pt structure. The Ag2Se layer that serves as the metal ionic source of GeSe switching medium was formed by a very simple wet-deposition process in AgNO3 solution. The X-ray diffraction and Auger electron spectroscopy analysis revealed the existence of the Ag2Se layer. As a result, an extremely low-voltage set/reset operation of less than 0.2 V, a high on-off resistance ratio larger than 103, good endurance characteristics, and excellent long-term reliability were achieved by the proposed Ag2Se/GeSe bilayered ReRAMs using the wet-deposition process. [ABSTRACT FROM AUTHOR]

Abstract: The CRISPR system is an adaptive RNA-based microbial immune system against invasive genetic elements. CasB is an essential protein component in Type I-E Cascade. Here, we characterize CasB proteins from three different organisms as non-specific nucleic acid binding proteins. The Thermobifida fusca CasB crystal structure reveals conserved positive surface charges, which we show are important for its nucleic acid binding function. EM docking reveals that CasB dimerization aligns individual nucleic acid binding surfaces into a curved, elongated binding surface inside Type I-E Cascade, consistent with the putative functions of CasB in ds-DNA recruitment and crRNA–DNA duplex formation steps. Structured summary of protein interactions: TthCasB and TthCasB bind by x-ray crystallography (View interaction) TfuCasB1 and TfuCasB1 bind by molecular sieving (View Interaction: 1, 2) [Copyright &y& Elsevier]

Summary: Clustered regularly interspaced short palindromic repeats (CRISPRs), together with an operon of CRISPR-associated (Cas) proteins, form an RNA-based prokaryotic immune system against exogenous genetic elements. Cas5 family proteins are found in several type I CRISPR-Cas systems. Here, we report the molecular function of subtype I-C/Dvulg Cas5d from Bacillus halodurans. We show that Cas5d cleaves pre-crRNA into unit length by recognizing both the hairpin structure and the 3′ single stranded sequence in the CRISPR repeat region. Cas5d structure reveals a ferredoxin domain-based architecture and a catalytic triad formed by Y46, K116, and H117 residues. We further show that after pre-crRNA processing, Cas5d assembles with crRNA, Csd1, and Csd2 proteins to form a multi-sub-unit interference complex similar to Escherichia coli Cascade (CRISPR-associated complex for antiviral defense) in architecture. Our results suggest that formation of a crRNA-presenting Cascade-like complex is likely a common theme among type I CRISPR subtypes. [ABSTRACT FROM AUTHOR]

Clustered regularly interspaced short palindromic repeats (CRISPR) and their associated protein genes (cas genes) are widespread in bacteria and archaea. They form a line of RNA-based immunity to eradicate invading bacteriophages and malicious plasmids. A key molecular event during this process is the acquisition of new spacers into the CRISPR loci to guide the selective degradation of the matching foreign genetic elements. Csn2 is a Nmeni subtype-specific cas gene required for new spacer acquisition. Here we characterize the Enterococcus faecalis Csn2 protein as a double-stranded (ds-) DNA-binding protein and report its 2.7 Å tetrameric ring structure. The inner circle of the Csn2 tetrameric ring is ∼26 Å wide and populated with conserved lysine residues poised for nonspecific interactions with ds-DNA. Each Csn2 protomer contains an α/β domain and an α-helical domain; significant hinge motion was observed between these two domains. Ca2+ was located at strategic positions in the oligomerization interface. We further showed that removal of Ca2+ ions altered the oligomerization state of Csn2, which in turn severely decreased its affinity for ds-DNA. In summary, our results provided the first insight into the function of the Csn2 protein in CRISPR adaptation by revealing that it is a ds-DNA-binding protein functioning at the quaternary structure level and regulated by Ca2+ ions. [ABSTRACT FROM AUTHOR]

Abstract: The bifunctional glycoside hydrolase enzyme, CelM2, is able to hydrolyze glucan and xylan effectively. The crystal structure of this protein has been determined, providing useful sequential and structural information [K.H. Nam, S.J. Kim, K.Y. Hwang, Crystal structure of CelM2, a bifunctional glucanase–xylanase protein from a metagenome library, Biochem. Biophys. Res. Commun. 383 (2009) 183–186]. In addition, this protein is a good model for understanding bifunctional enzymes, and it will provide information relevant for genetic engineering that will be useful in the design of bifunctional proteins. However, previous structural characterization was not sufficient to develop an understanding of the metal ion and substrate-binding moiety. Herein, we determined the metal-binding site of CelM2 using zinc ions. Our results revealed that the zinc ions participate in the crystallographic packing and enzyme folding of the external region of the TIM-like barrel domain. Based on our structure, zinc ions induce the passive form of the CAP region at the catalytic cleft of the CelM2 protein. Moreover, glucose was bound to the CelM2 structure at the catalytic site. This structure provides the binding moiety that binds to the hydroxyl group of substrates such as cellulose. In addition, a structural comparison of celM2 with Cel44 provides a good model of the binding mode of CelM2. Thus, our study represents a novel structural characterization of the metal-binding site and the structure of the complex formed between CelM2 and its substrate. [Copyright &y& Elsevier]

Abstract: β-Glucosidase enzymes (EC 3.2.1–3.2.3) hydrolyze sugars and are implicated in a wide spectrum of biological processes. Recently, we reported that β-glucosidase has varied kinetic parameters for the natural and synthetic substrates [K.H Nam, S.J. Kim, M.Y. Kim, J.H. Kim, T.S. Yeo, C.M. Lee, H.K Jun, K.Y. Hwang. Crystal structure of engineered beta-glucosidase from a soil metagenome, Proteins 73 (2008) 788-793]. However, an understanding of the kinetic values of β-glucosidase has not yet enabled the elucidation of its molecular function. Here, we report the X-ray crystal structure of β-glucosidase with a glucose and cellobiose fragment from uncultured soil metagenome. From the various crystals, we obtained the pre-reaction (native), intermediate (disaccharide cleavage) and post-reaction (glucose binding) states of the active site pocket. These structures provide snapshots of the catalytic processing of β-glucosidase. In addition, the intermediate state of the crystal structure provides insight into the substrate specificity of β-glucosidase. These structural studies will facilitate elucidation of the architectural mechanism responsible for the substrate recognition of β-glucosidase. [Copyright &y& Elsevier]

Abstract: Iron is essential for the survival of organisms, but either excess or deficient levels of iron induce oxidative stress, thereby causing cell damage. As a result, iron regulation is essential for proper cell growth and proliferation in most organisms. Bacterioferritin is a ferritin-like family protein that contains a heme molecule and a ferroxidase site at the di-iron center. This protein plays a primary role in intracellular iron storage for iron homeostasis, as well as in the maintenance of iron in a soluble and non-toxic form. Although several bacterioferritin structures have been determined, no structural studies have successfully elucidated the molecular function of the heme molecule and the ferroxidase center. Here, we report the crystal structure of bacterioferritin from Rhodobacter sphaeroides. This protein exists in a roughly spherical configuration via the assembly of 24 subunits. We describe the oligomeric arrangement, ferroxidase center and heme-binding site based on this structure. The protein contains a single iron-binding configuration in the ferroxidase center, which allows for the release of iron by His130 when the protein is in the intermediate state. The heme molecule in RsBfr is stabilized by shifting of the van der Waals interaction center between the porphyrin of the heme and Trp26. We anticipate that further structural analysis will provide a more complete understanding of the molecular mechanisms of members of the ferritin-like family. [Copyright &y& Elsevier]

Abstract: The esterase/lipase family (EC 3.1.1.3/EC 3.1.1.1) represents a diverse group of hydrolases that catalyze the cleavage of ester bonds and are widely distributed in animals, plants and microorganisms. Among these enzymes, hormone-sensitive lipases, play a critical role in the regulation of rodent fat cell lipolysis and are regarded as adipose tissue-specific enzymes. Recently, we reported the structural and biological characterization of EstE5 from the metagenome library [K.H. Nam, M.Y. Kim, S.J. Kim, A. Priyadarshi, W.H. Lee, K.Y. Hwang, Structural and functional analysis of a novel EstE5 belonging to the subfamily of hormone-sensitive lipase, Biochem. Biophys. Res. Commun. 379 (2009) 553–556]. The structure of this protein revealed that it belongs to the HSL-family. Here, we report the inhibition of the activity of the HSL-homolog EstE5 protein as determined by the use of esterase/lipase inhibitors. Our results revealed that the EstE5 protein is significantly inhibited by PMSF. In addition, this is the first study to identify the crystal structures of EstE5–PMSF at 2.4 and 2.5Å among the HSL-homolog structures. This structural configuration is similar to that adopted when serine proteases are inhibited by PMSF. The results presented here provide valuable information regarding the properties of the HSL-family. [Copyright &y& Elsevier]

Abstract: Degradation of polysaccharides by cellulases and xylanases plays an important role in the carbon cycle, but only occurs in plant cell walls, a few bacteria and some animals. This process is also critical in processes such as biomass degradation and fuel production in the conversion cycles of cellulosic biomass. The enzyme CelM2 is bifunctional, because it is able to effectively hydrolyze barley glucan and xylan. Here, we show the crystal structure of the bifunctional enzyme CelM2, isolated from a metagenome library, and describe the sequence information and structure of its two domains. We believe that CelM2 is attractive as an industrial enzyme and that the structural results presented herein provide insights that are relevant to the genetic engineering of multifunctional enzymes. [Copyright &y& Elsevier]

Abstract: PDF (peptide deformylase) plays a critical role in the production of mature proteins by removing the N-formyl polypeptide of nascent proteins in the prokaryote cell system. This protein is essential for bacterial growth, making it an attractive target for the design of new antibiotics. Accordingly, PDF has been evaluated as a drug target; however, architectural mechanism studies of PDF have not yet fully elucidated its molecular function. We recently reported the crystal structure of PDF produced by Enterococcus faecium [K.H. Nam, J.I. Ham, A. Priyadarshi, E.E. Kim, N. Chung, K.Y. Hwang, “Insight into the antibacterial drug design and architectural mechanism of peptide recognition from the E. faecium peptide deformylase structure”, Proteins 74 (2009) 261–265]. Here, we present the crystal structure of the EfPDF complex with MAS (Met-Ser-Ala), thereby not only delineating the architectural mechanism for the recognition of mimic-peptides by N-terminal cleaved expression peptide, but also suggesting possible targets for rational design of antibacterial drugs. In addition to their implications for drug design, these structural studies will facilitate elucidation of the architectural mechanism responsible for the peptide recognition of PDF. [Copyright &y& Elsevier]

Abstract: Hormone-sensitive lipase (HSL) plays an important role in the regulation of rodent fat cell lipolysis. It is regarded as an adipose tissue-specific enzyme whose sole metabolic role is the catalysis of hormone-stimulated lipolysis in mammalian cells. In this report we describe the functional and structural analysis of an EstE5 protein from a soil metagenome library. Function analysis results indicated that EstE5 preferentially hydrolyzes short-chain ester compounds, and our kinetic studies revealed the optimal pH and temperature. Based on the structural analysis, we defined the active site and the binding pocket. Structurally, EstE5 belongs to the HSL family and these structural studies may have applications in the production of value-added products, including pharmaceuticals. [Copyright &y& Elsevier]

Abstract: The photoswitching behavior of green fluorescent proteins (GFPs) or GFP-like proteins is increasingly recognized as a new technique for optical marking. Recently, Ando and his colleagues developed a new green fluorescent protein Dronpa, which possesses the unique photochromic property of being photoswitchable in a non-destructive manner. To better understand this mechanism, we determined the crystal structures of a new GFP Dronpa and its mutant C62S, at 1.9Å and 1.8Å, respectively. Determination of the structures demonstrates that a unique hydrogen-bonding network and the sulfur atom of the chromophore are critical to the photoswitching property of Dronpa. Reversible photoswitching was lost in cells expressing the Dronpa-C62S upon repetitive irradiation compared to the native protein. Structural and mutational analyses reveal the chemical basis for the functional properties of photoswitchable fluorescent proteins and provide the basis for subsequent coherent engineering of this subfamily of Dronpa homolog’s. [Copyright &y& Elsevier]

The CRISPR-Cas type III-E RNA-targeting effector complex gRAMP/Cas7-11 is associated with a caspase-like protein (TPR-CHAT/Csx29) to form Craspase (CRISPR-guided caspase). Here, we use cryo– electron microscopy snapshots of Craspase to explain its target RNA cleavage and protease activation mechanisms. Target-guide pairing extending into the 5′ region of the guide RNA displaces a gating loop in gRAMP, which triggers an extensive conformational relay that allosterically aligns the protease catalytic dyad and opens an amino acid side-chain–binding pocket. We further define Csx30 as the endogenous protein substrate that is site-specifically proteolyzed by RNA-activated Craspase. This protease activity is switched off by target RNA cleavage by gRAMP and is not activated by RNA targets containing a matching protospacer flanking sequence. We thus conclude that Craspase is a target RNA–activated protease with self-regulatory capacity. [ABSTRACT FROM AUTHOR]

Glucose isomerase (GI) is an important enzyme that is widely used in industrial applications, such as in the production of high-fructose corn syrup or bioethanol. Studying inhibitor effects on GI is important to deciphering GI-specific molecular functions, as well as potential industrial applications. Analysis of the existing xylitol-bound GI structure revealed low metal occupancy at the M2 site; however, it remains unknown why this phenomenon occurs. This study reports the room-temperature structures of native and xylitol-bound GI from Streptomyces rubiginosus (SruGI) determined by serial millisecond crystallography. The M1 site of native SruGI exhibits distorted octahedral coordination; however, xylitol binding results in the M1 site exhibit geometrically stable octahedral coordination. This change results in the rearrangement of metal-binding residues for the M1 and M2 sites, the latter of which previously displayed distorted metal coordination, resulting in unstable coordination of Mg2+ at the M2 site and possibly explaining the inducement of low metal-binding affinity. These results enhance the understanding of the configuration of the xylitol-bound state of SruGI and provide insights into its future industrial application. [ABSTRACT FROM AUTHOR]

All molecular systems, from small molecules to macromolecules, exhibit specific characteristics for a specific environment and time. In order to gain an accurate understanding of the functions of all types of molecules, studies of their structure and dynamics are essential. Through dynamic studies, using techniques such as spectroscopy, structure determination, and computer analysis, it is possible to collect functional information on molecules at specific times and in specific environments. Such information not only reveals the properties and mechanisms of action of molecules but also provides insights that can be applied to various industries, such as the development of new materials and drugs. Herein, I discuss the importance of molecular dynamics studies, present the time scale of molecular motion, and review techniques for analyzing molecular dynamics. [ABSTRACT FROM AUTHOR]

Metalloproteases and their inhibitors are important in numerous fundamental biochemical phenomena and medical applications. The heterocyclic organic compound, 1,10-phenanthroline, forms a complex with transition metal ions and is a Zn2+-chelating metalloprotease inhibitor; however, the mechanism of 1,10-phenanthroline-based chelation inhibition has not been fully elucidated. This study aimed to understand the structural basis of zinc metalloproteinase inhibition by 1,10-phenanthroline. Herein, the crystal structure of thermolysin was determined in the absence and presence of 1,10-phenanthroline at 1.5 and 1.8 Å, respectively. In native thermolysin, Zn2+ at the active site is tetrahedrally coordinated by His142, His146, Glu166, and water molecule and contains three Ca2+ ions, which are involved in thermostability. In the crystal structure of 1,10-phenanthroline-treated thermolysin crystal, seven 1,10-phenanthroline molecules were observed on the surface of thermolysin. These molecules are stabilized by π- π stacking interactions with aromatic amino acids (Phe63, Tyr66, Tyr110, His216, and Try251) or between the 1,10-phenanthrolines. Moreover, interactions with Ser5 and Arg101 were also observed. In this structure, Zn2+ at the active site was completely chelated, but no large conformational changes were observed in Zn2+ coordination with amino acid residues. Ca2+ at the Ca3 site exposed to the solvent was chelated by 1,10-phenanthroline, resulting in a conformational change in the side chain of Asp56 and Gln61. Based on the surface structure, for 1,10-phenanthroline to chelate a metal, it is important that the metal is exposed on the protein surface and that there is no steric hindrance impairing 1,10-phenanthroline access by the amino acids around the metal. Unlabelled Image The crystal structure of thermolysin was determined in the absence and presence of 1,10-phenanthroline, a chealing inhibitor for metalloproteinase. • The crystal structure of thermolysin complexed with 1,10-phenanthroline was determined. • Zn2+ at the active site is chelated by 1,10-phananthroline. • Ca2+ at the Ca3 site exposed to the solvent were chelated by 1,10-phenanthroline. • The mechanism underlying metal chelation of phenanthroline is proposed. [ABSTRACT FROM AUTHOR]

Sensitive and accurate detection of specific metal ions is important for sensor development and can advance analytical science and support environmental and human medical examinations. Fluorescent proteins (FPs) can be quenched by specific metal ions and spectroscopically show a unique fluorescence-quenching sensitivity, suggesting their potential application as FP-based metal biosensors. Since the characteristics of the fluorescence quenching are difficult to predict, spectroscopic analysis of new FPs is important for the development of FP-based biosensors. Here we reported the spectroscopic and structural analysis of metal-induced fluorescence quenching of the photoconvertible fluorescent protein DendFP. The spectroscopic analysis showed that Fe2+, Fe3+, and Cu2+ significantly reduced the fluorescence emission of DendFP. The metal titration experiments showed that the dissociation constants (Kd) of Fe2+, Fe3+, and Cu2+ for DendFP were 24.59, 41.66, and 137.18 μM, respectively. The tetrameric interface of DendFP, which the metal ions cannot bind to, was analyzed. Structural comparison of the metal-binding sites of DendFP with those of iq-mEmerald and Dronpa suggested that quenchable DendFP has a unique metal-binding site on the β-barrel that does not utilize the histidine pair for metal binding. [ABSTRACT FROM AUTHOR]

Serial crystallography (SX) using X-ray free electron laser or synchrotron X-ray allows for the determination of structures, at room temperature, with reduced radiation damage. Moreover, it allows for the study of structural dynamics of macromolecules using a time-resolved pump-probe, as well as mix-and-inject experiments. Delivering a crystal sample using a viscous medium decreases sample consumption by lowering the flow rate while being extruded from the injector or syringe as compared to a liquid jet injector. Since the environment of crystal samples varies, continuous development of the delivery medium is important for extended SX applications. Herein, I report the preparation and characterization of a lard-based sample delivery medium for SX. This material was obtained using heat treatment, and then the soluble impurities were removed through phase separation. The lard injection medium was highly stable and could be injected via a syringe needle extruded at room temperature with a flow rate < 200 nL/min. Serial millisecond crystallography experiments were performed using lard, and the room temperature structures of lysozyme and glucose isomerase embedded in lard at 1.75 and 1.80 Å, respectively, were determined. The lard medium showed X-ray background scattering similar or relatively lower than shortenings and lipidic cubic phase; therefore, it can be used as sample delivery medium in SX experiments. [ABSTRACT FROM AUTHOR]

The protein encoded by the MJ0754 gene from the archaeon Methanococcus jannaschii DSM 2661 is an unknown hypothetical protein. Two recombinant proteins, MJ0754 (residues 1-185) and MJ0754t (a truncated form of MJ0754, residues 11-185), were cloned from MJ0754, overexpressed as His-tag fusion proteins and purified. The crystals were found to grow under two different conditions and to have two different shapes. The crystal of MJ0754 belonged to space group P61, with unit-cell parameters a = b = 127.015, c = 48.929 Å, a calculated Matthews coefficient of 2.85 Å3 Da−1 and two molecules per asymmetric unit. The crystal of MJ0754t belonged to space group C2221, with unit-cell parameters a = 51.915, b = 79.122, c = 93.869 Å, a calculated Matthews coefficient of 2.41 Å3 Da−1 and one molecule per asymmetric unit. The SeMet-labelled P61 crystal diffracted to a resolution of 3.1 Å, while the native C2221 crystal diffracted to 1.3 Å resolution. [ABSTRACT FROM AUTHOR]

Probable tRNA-modification GTPase (TrmE) is a guanine nucleotide-binding protein that is conserved between bacteria and humans. GTPase hydrolyzes GTP and plays a pivotal role in signalling pathways. In this study, TrmE from Staphylococcus aureus was overexpressed in Escherichia coli. The enzyme was found to crystallize at 295 K when ammonium sulfate was used as a precipitant. X-ray diffraction data were collected to 2.9 Å resolution from the crystallized enzyme using synchrotron radiation. The crystal was found to belong to the cubic space group I23, with unit-cell parameters a = b = c = 229.47 Å, α = β = γ = 90°. The crystal is likely to contain four monomers in the asymmetric unit, with a corresponding VM of 2.4 Å3 Da−1 and a solvent content of 50%. [ABSTRACT FROM AUTHOR]

Serial crystallography (SX) provides an opportunity to observe the molecular dynamics of macromolecular structures at room temperature via pump-probe studies. The delivery of crystals embedded in a viscous medium via an injector or syringe is widely performed in synchrotrons or X-ray free-electron laser facilities with low repetition rates. Various viscous media have been developed; however, there are cases in which the delivery material undesirably interacts chemically or biologically with specific protein samples, or changes the stability of the injection stream, depending on the crystallization solution. Therefore, continued discovery and characterization of new delivery media is necessary for expanding future SX applications. Here, the preparation and characterization of new polysaccharide (wheat starch (WS) and alginate)-based sample delivery media are introduced for SX. Crystals embedded in a WS or alginate injection medium showed a stable injection stream at a flow rate of < 200 nL/min and low-level X-ray background scattering similar to other hydrogels. Using these media, serial millisecond crystallography (SMX) was performed, and the room temperature crystal structures of glucose isomerase and lysozyme were determined at 1.9–2.0 Å resolutions. WS and alginate will allow an expanded application of sample delivery media in SX experiments. [ABSTRACT FROM AUTHOR]

X-ray crystallographic methods can be used to visualize macromolecules at high resolution. This provides an understanding of molecular mechanisms and an insight into drug development and rational engineering of enzymes used in the industry. Although conventional synchrotron-based X-ray crystallography remains a powerful tool for understanding molecular function, it has experimental limitations, including radiation damage, cryogenic temperature, and static structural information. Serial femtosecond crystallography (SFX) using X-ray free electron laser (XFEL) and serial millisecond crystallography (SMX) using synchrotron X-ray have recently gained attention as research methods for visualizing macromolecules at room temperature without causing or reducing radiation damage, respectively. These techniques provide more biologically relevant structures than traditional X-ray crystallography at cryogenic temperatures using a single crystal. Serial femtosecond crystallography techniques visualize the dynamics of macromolecules through time-resolved experiments. In serial crystallography (SX), one of the most important aspects is the delivery of crystal samples efficiently, reliably, and continuously to an X-ray interaction point. A viscous delivery medium, such as a carrier matrix, dramatically reduces sample consumption, contributing to the success of SX experiments. This review discusses the preparation and criteria for the selection and development of a sample delivery medium and its application for SX. [ABSTRACT FROM AUTHOR]

The fluorescence of fluorescent proteins (FPs) is quenched when they are exposed to certain transition metals, which makes them promising receptor materials for metal biosensors. In this study, we report the spectroscopic analysis of metal-induced fluorescence quenching of the fluorescent protein ZsGreen from Zoanthus sp. The fluorescence of ZsGreen was reduced to 2%, 1%, and 20% of its original intensity by Fe2+, Fe3+, and Cu2+, respectively. Metal titration experiments indicated that the dissociation constants of Fe2+, Fe3+, and Cu2+ for ZsGreen were 11.5, 16.3, and 68.2 μM, respectively. The maximum binding capacities of ZsGreen for Fe2+, Fe3+, and Cu2+ were 103.3, 102.2, and 82.9, respectively. Reversibility experiments indicated that the fluorescence of ZsGreen, quenched by Fe2+ and Fe3+, could be recovered, but only to about 15% of its original intensity, even at a 50-fold molar excess of EDTA. In contrast, the fluorescence quenched by Cu2+ could be recovered up to 89.47% of its original intensity at a Cu2+: EDTA ratio of 1:5. The homology model of ZsGreen revealed that the protein does not share any metal-binding sites with previously reported FPs, suggesting that ZsGreen contains unprecedented binding sites for fluorescence quenching metal ions. [ABSTRACT FROM AUTHOR]

Cyanase plays a vital role in the detoxification of cyanate and supplies a continuous nitrogen source for soil microbes by converting cyanate to ammonia and carbon dioxide in a bicarbonate‐dependent reaction. The structures of cyanase complexed with dianion inhibitors, in conjunction with biochemical studies, suggest putative binding sites for substrates. However, the substrate‐recognition and reaction mechanisms of cyanase remain unclear. Here, crystal structures of cyanase from Escherichia coli were determined in the native form and in complexes with cyanate, bicarbonate and intermediates at 1.5–1.9 Å resolution using synchrotron X‐rays and an X‐ray free‐electron laser. Cyanate and bicarbonate interact with the highly conserved Arg96, Ser122 and Ala123 in the active site. In the presence of a mixture of cyanate and bicarbonate, three different electron densities for intermediates were observed in the cyanase structures. Moreover, the observed electron density could explain the dynamics of the substrate or product. In addition to conformational changes in the substrate‐binding pocket, dynamic movement of Leu151 was observed, which functions as a gate for the passage of substrates or products. These findings provide a structural mechanism for the substrate‐binding and reaction process of cyanase. [ABSTRACT FROM AUTHOR]

Xylanases are important for the enzymatic breakdown of lignocellulose-based biomass to produce biofuels and other value-added products. We report functional and structural analyses of TsaGH11, an endo-1,4-β-xylanase from the hemicellulose-degrading bacterium, Thermoanaerobacterium saccharolyticum. TsaGH11 was shown to be a thermophilic enzyme that favors acidic conditions with maximum activity at pH 5.0 and 70 °C. It decomposes xylans from beechwood and oat spelts to xylose-containing oligosaccharides with specific activities of 5622.0 and 3959.3 U mg−1, respectively. The kinetic parameters, Km and kcat towards beechwood xylan, are 12.9 mg mL−1 and 34,015.3 s−1, respectively, resulting in kcat/Km value of 2658.7 mL mg−1 s−1, higher by 102–103 orders of magnitude compared to other reported GH11s investigated with the same substrate, demonstrating its superior catalytic performance. Crystal structures of TsaGH11 revealed a β-jelly roll fold, exhibiting open and close conformations of the substrate-binding site by distinct conformational flexibility to the thumb region of TsaGH11. In the room-temperature structure of TsaGH11 determined by serial synchrotron crystallography, the electron density map of the thumb domain of the TsaGH11 molecule, which does not affect crystal packing, is disordered, indicating that the thumb domain of TsaGH11 has high structural flexibility at room temperature, with the water molecules in the substrate-binding cleft being more disordered than those in the cryogenic structure. These results expand our knowledge of GH11 structural flexibility at room temperature and pave the way for its application in industrial biomass degradation. [ABSTRACT FROM AUTHOR]

Endo-1,4-β-xylanases belonging to the glycoside hydrolase (GH) 11 family hydrolyze the β-1,4-glycosidic linkages in the xylan backbone to convert polymeric xylan into xylooligosaccharides. GH11 xylanases play an essential role in sugar metabolism and are one of the most widely used enzymes in various industries, such as pulp and paper, food and feed, biorefinery, textile, and pharmaceutical industries. pH is a crucial factor influencing the biochemical properties of GH11 xylanase and its application in bioprocessing. For the optimal pH shifting of GH11 xylanase in industrial applications, various protein engineering studies using directed evolution, rational engineering, and in silico approaches have been adopted. Here, we review the functions, structures, and engineering methods developed for the optimal pH shifting of GH11 xylanases. The various GH11 engineering techniques and key residues involved in pH shifting are discussed based on their crystal and modeled structure. This review provides an overview of recent advancements in the characterization and engineering of GH11 xylanases, providing a guide for future research in this field. [ABSTRACT FROM AUTHOR]

Xylanases are important for the enzymatic breakdown of lignocellulose-based biomass to produce biofuels and other value-added products. We report functional and structural analyses of TsaGH11, an endo-1,4-β-xylanase from the hemicellulose-degrading bacterium, Thermoanaerobacterium saccharolyticum. TsaGH11 was shown to be a thermophilic enzyme that favors acidic conditions with maximum activity at pH 5.0 and 70 °C. It decomposes xylans from beechwood and oat spelts to xylose-containing oligosaccharides with specific activities of 5622.0 and 3959.3 U mg−1, respectively. The kinetic parameters, Km and kcat towards beechwood xylan, are 12.9 mg mL−1 and 34,015.3 s−1, respectively, resulting in kcat/Km value of 2658.7 mL mg−1 s−1, higher by 102–103 orders of magnitude compared to other reported GH11s investigated with the same substrate, demonstrating its superior catalytic performance. Crystal structures of TsaGH11 revealed a β-jelly roll fold, exhibiting open and close conformations of the substrate-binding site by distinct conformational flexibility to the thumb region of TsaGH11. In the room-temperature structure of TsaGH11 determined by serial synchrotron crystallography, the electron density map of the thumb domain of the TsaGH11 molecule, which does not affect crystal packing, is disordered, indicating that the thumb domain of TsaGH11 has high structural flexibility at room temperature, with the water molecules in the substrate-binding cleft being more disordered than those in the cryogenic structure. These results expand our knowledge of GH11 structural flexibility at room temperature and pave the way for its application in industrial biomass degradation. [ABSTRACT FROM AUTHOR]

Glucose isomerase (GI) catalyzes the reversible enzymatic isomerization of d -glucose and d -xylose to d -fructose and d -xylulose, respectively. This is one of the most important enzymes in the production of high-fructose corn syrup (HFCS) and biofuel. We recently determined the crystal structure of GI from S. rubiginosus (SruGI) complexed with a xylitol inhibitor in one metal binding mode. Although we assessed inhibitor binding at the M1 site, the metal binding at the M2 site and the substrate recognition mechanism for SruGI remains the unclear. Here, we report the crystal structure of the two metal binding modes of SruGI and its complex with glucose. This study provides a snapshot of metal binding at the SruGI M2 site in the presence of Mn 2+ , but not in the presence of Mg 2+ . Metal binding at the M2 site elicits a configuration change at the M1 site. Glucose molecule can only bind to the M1 site in presence of Mn 2+ at the M2 site. Glucose and Mn 2+ at the M2 site were bridged by water molecules using a hydrogen bonding network. The metal binding geometry of the M2 site indicates a distorted octahedral coordination with an angle of 55–110°, whereas the M1 site has a relatively stable octahedral coordination with an angle of 85–95°. We suggest a two-step sequential process for SruGI substrate recognition, in Mn 2+ binding mode, at the M2 site. Our results provide a better understanding of the molecular role of the M2 site in GI substrate recognition. [ABSTRACT FROM AUTHOR]

Glucose isomerase (GI) is an intramolecular oxidoreductase that interconverts aldoses and ketoses. These characteristics are widely used in the food, detergent, and pharmaceutical industries. In order to obtain an efficient GI, identification of novel GI genes and substrate binding/inhibition have been studied. Xylitol is a well-known inhibitor of GI. In Streptomyces rubiginosus , two crystal structures have been reported for GI in complex with xylitol inhibitor. However, a structural comparison showed that xylitol can have variable conformation at the substrate binding site, e.g., a nonspecific binding mode. In this study, we report the crystal structure of S. rubiginosus GI in a complex with xylitol and glycerol. Our crystal structure showed one metal binding mode in GI, which we presumed to represent the inactive form of the GI. The metal ion was found only at the M1 site, which was involved in substrate binding, and was not present at the M2 site, which was involved in catalytic function. The O 2 and O 4 atoms of xylitol molecules contributed to the stable octahedral coordination of the metal in M1. Although there was no metal at the M2 site, no large conformational change was observed for the conserved residues coordinating M2. Our structural analysis showed that the metal at the M2 site was not important when a xylitol inhibitor was bound to the M1 site in GI. Thus, these findings provided important information for elucidation or engineering of GI functions. [ABSTRACT FROM AUTHOR]

Many fluorescent proteins (FPs) exhibit fluorescence quenching at a low pH. This pH-induced non-fluorescent state of an FP serves as a useful indicator of the cellular pH. ZsYellow is widely used as an optical marker in molecular biology, but its pH-induced non-fluorescent state has not been characterized. Here, we report the pH-dependent spectral properties of ZsYellow, which exhibited the pH-induced non-fluorescence state at a pH below 4.0. We determined the crystal structures of ZsYellow at pH 3.5 (non-fluorescence state) and 8.0 (fluorescence state), which revealed the cis -configuration of the chromophore without pH-induced isomerization. In the non-fluorescence state, Arg95, which is involved in stabilization of the exited state of the chromophore, was found to more loosely interact with the carbonyl oxygen atom of the chromophore when compared to the interaction at pH 8.0. In the fluorescence state, Glu221, which is involved in the hydrogen bonding network around the chromophore, stably interacted with Gln42 and His202. By contrast, in the non-fluorescence state, the protonated conserved Glu221 residue exhibited a large conformational change and was separated from His202 by 5.46 Å, resulting in breakdown of the hydrogen bond network. Our results provide insight into the critical role of the conserved Glu221 residue for generating the pH-induced non-fluorescent state. [ABSTRACT FROM AUTHOR]

Butanol dehydrogenase (BDH) plays a significant role in the biosynthesis of butanol in bacteria by catalyzing butanal conversion to butanol at the expense of the NAD(P)H cofactor. BDH is an attractive enzyme for industrial application in butanol production; however, its molecular function remains largely uncharacterized. In this study, we found that Fusobacterium nucleatum YqdH (FnYqdH) converts aldehyde into alcohol by utilizing NAD(P)H, with broad substrate specificity toward aldehydes but not alcohols. An in vitro metal ion substitution experiment showed that FnYqdH has higher enzyme activity in the presence of Co2+. Crystal structures of FnYqdH, in its apo and complexed forms (with NAD and Co2+), were determined at 1.98 and 2.72 Å resolution, respectively. The crystal structure of apo- and cofactor-binding states of FnYqdH showed an open conformation between the nucleotide binding and catalytic domain. Key residues involved in the catalytic and cofactor-binding sites of FnYqdH were identified by mutagenesis and microscale thermophoresis assays. The structural conformation and preferred optimal metal ion of FnYqdH differed from that of TmBDH (homolog protein of FnYqdH). Overall, we proposed an alternative model for putative proton relay in FnYqdH, thereby providing better insight into the molecular function of BDH. [ABSTRACT FROM AUTHOR]