Search

There are two categories of coordination polymers (CPs): inorganic CPs (i-CPs) and organic ligand bridged CPs (o-CPs). Based on the successful crystal engineering of CPs, we here propose noncrystalline states and functionalities as a new research direction for CPs. Control over the liquid or glassy states in materials is essential to obtain specific properties and functions. Several studies suggest the feasibility of obtaining liquid/glassy states in o-CPs by design principles. The combination of metal ions and organic bridging ligands, together with the liquid/glass phase transformation, offer the possibility to transform o-CPs into ionic liquids and other ionic soft materials. Synchrotron measurements and computational approaches contribute to elucidating the structures and dynamics of the liquid/glassy states of o-CPs. This offers the opportunity to tune the porosity, conductivity, transparency, and other material properties. The unique energy landscape of liquid/glass o-CPs offers opportunities for properties and functions that are complementary to those of the crystalline state., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

High proton conducting electrolytes with mechanical moldability are a key material for energy devices. We propose an approach for creating a coordination polymer (CP) glass from a protic ionic liquid for a solid-state anhydrous proton conductor. A protic ionic liquid (dema)(H 2 PO 4 ), with components which also act as bridging ligands, was applied to construct a CP glass (dema) 0.35 [Zn(H 2 PO 4 ) 2.35 (H 3 PO 4 ) 0.65 ]. The structural analysis revealed that large Zn-H 2 PO 4 - /H 3 PO 4 coordination networks formed in the CP glass. The network formation results in enhancement of the properties of proton conductivity and viscoelasticity. High anhydrous proton conductivity ( σ = 13.3 mS cm -1 at 120 °C) and a high transport number of the proton (0.94) were achieved by the coordination networks. A fuel cell with this CP glass membrane exhibits a high open-circuit voltage and power density (0.15 W cm -2 ) under dry conditions at 120 °C due to the conducting properties and mechanical properties of the CP glass., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Single-ligand-based electronically conductive porous coordination polymers/metal-organic frameworks (EC-PCPs/MOFs) fail to meet the requirements of numerous electronic applications owing to their limited tunability in terms of both conductivity and topology. In this study, a new 2D π-conjugated EC-MOF containing copper units with mixed trigonal ligands was developed: Cu 3 (HHTP)(THQ) (HHTP=2,3,6,7,10,11-hexahydrotriphenylene, THQ=tetrahydroxy-1,4-quinone). The modulated conductivity (σ≈2.53×10 -5  S cm -1 with an activation energy of 0.30 eV) and high porosity (ca. 441.2 m 2  g -1 ) of the Cu 3 (HHTP)(THQ) semiconductive nanowires provided an appropriate resistance baseline and highly accessible areas for the development of an excellent chemiresistive gas sensor., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Crystal melting and glass formation of coordination polymers (CPs) and metal-organic frameworks (MOFs) are rare thermal events. To expand the library of melting CP/MOFs, we utilized anti-crystal engineering in ionic liquids to construct CPs. A combination of Cu+ and 4,4'-bipyridin-1-ium derivatives afforded four melting CPs showing stable liquid and glassy states.

We design the Janus-like interlayer with two different functional faces for suppressing the shuttle of soluble lithium polysulfides (LPSs) in lithium-sulfur batteries (LSBs). At the front face, the conductive functionalized carbon fiber paper (f-CFP) having oxygen-containing groups i.e., -OH and -COOH on its surface was placed face to face with the sulfur cathode serving as the first barrier accommodating the volume expansion during cycling process and the oxygen-containing groups can also adsorb the soluble LPSs via lithium bonds. At the back face, a crystalline coordination network of [Zn(H 2 PO 4 ) 2 (TzH) 2 ] n (ZnPTz) was coated on the back side of f-CFP serving as the second barrier retarding the left LPSs passing through the front face via both physical confinement and chemical adsorption (i.e. Li bonding). The LSB using the Janus-like interlayer exhibits a high reversible discharge capacity of 1,416 mAh g -1 at 0.1C with a low capacity fading of 0.05% per cycle, 92% capacity retention after 200 cycles and ca. 100% coulombic efficiency. The fully charged LSB cell can practically supply electricity to a spinning motor with a nominal voltage of 3.0 V for 28 min demonstrating many potential applications.

Oligodiacetylenes (ODAs) with alternating ene-yne conjugated structure are significant materials for optical and electronic properties. Due to the low solubility of ODAs in common solvents, the synthetic approaches are limited. Here we disclose a new synthetic approach of ODAs without a side alkyl chain using a porous coordination polymer (PCP) as a sacrificial template. 1,2-Bis(4-pyridyl)butadiyne, which works as a monomer, was embedded in the flexible framework of the PCP, and ODAs were synthesized via utilization of the anisotropic thermal expansion of the PCP crystal. The oligomeric state of ODAs depends on the metal ion and coligand of the precursor.

A proton-conducting coordination polymer of anionic one-dimensional (1D) chains of Zn 2+ phosphate and protonated imidazole with the formula of [Zn(HPO 4 )(H 2 PO 4 ) 2 ](ImH 2 ) 2 has been used as a novel supercapacitor material in aqueous electrolytes. This material stores charges via a proton-hopping mechanism.

The melting behavior of a coordination polymer (CP) crystal was utilized to achieve enhanced and optically switchable proton conductivity in the solid state. The strong acid molecules (triflic acid) were doped in one-dimensional (1D) CP, [Zn(HPO 4 )(H 2 PO 4 ) 2 ](ImH 2 ) 2 (ImH 2 =monoprotonated imidazole) in the melt state, and overall enhancement in the proton conductivity was obtained. The enhanced proton conductivity is assigned to increased number of mobile protons and defects created by acid doping. Optical control over proton conductivity in the CP is achieved by doping of the photo acid molecule pyranine into the melted CP. The pyranine reversibly generates the mobile acidic protons and local defects in the glassy state of CP resulting in the bulk switchable conductivity mediated by light irradiation. Utilization of CP crystal in liquid state enables to be a novel route to incorporate functional molecules and defects, and it provides a tool to control the bulk properties of the CP material., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Redox-active pyrrole (Py) monomers were intercalated into 1D nanochannels of [Cd(NDC)0.5(PCA)]·Gx (H2NDC = 2,6-napthalenedicarboxylic acid, HPCA = 4-pyridinecarboxylic acid, G = guest molecules) (1) - a fluorescent 3D MOF (λem = 385 nm). Subsequent activation of 1⊃Py upon immersing into iodine (I2) solution resulted in an increment of the bulk electrical conductivity by ∼9 orders of magnitude. The unusual increase in conductivity was attributed to the formation of highly oriented and conducting polypyrrole (PPy) chains inside 1D nanochannels and specific host-guest interaction in 1⊃PPy thereof. The Hall-effect measurements suggested 1⊃PPy to be an n-type semiconductor material with remarkably high-carrier density (η) of ∼1.5 × 10(17) cm(-3) and mobility (μ) of ∼8.15 cm(2) V(-1) s(-1). The fluorescence property of 1 was almost retained in 1⊃PPy with concomitant exciplex-type emission at higher wavelength (λem = 520 nm). The here-presented results on [MOF⊃Conducting Polymer] systems in general will serve as a prototype experiment toward rational design for the development of highly conductive yet fluorescent MOF-based materials for various optoelectronic applications.

We describe the encapsulation of mobile proton carriers into defect sites in nonporous coordination polymers (CPs). The proton carriers were encapsulated with high mobility and provided high proton conductivity at 150 °C under anhydrous conditions. The high proton conductivity and nonporous nature of the CP allowed its application as an electrolyte in a fuel cell. The defects and mobile proton carriers were investigated using solid-state NMR, XAFS, XRD, and ICP-AES/EA. On the basis of these analyses, we concluded that the defect sites provide space for mobile uncoordinated H3PO4, H2PO4(-), and H2O. These mobile carriers play a key role in expanding the proton-hopping path and promoting the mobility of protons in the coordination framework, leading to high proton conductivity and fuel cell power generation.

A chemically stable cationic MOF encapsulating an in situ formed water-hydroxide supramolecular anionic chain is realized for high hydroxide (OH(-)) ion conductivity in the solid-state (Type A). High OH(-) ion conductivity and low activation energy of the MOF demonstrate the advantage of the in situ incorporation of OH(-) ions to achieve efficient OH(-) ion conduction in the solid-state.

Prompt and selective detection of nitro explosives in the aqueous phase is in high demand to meet homeland security and environmental concerns. Herein we report the chemically stable porous metal organic framework UiO-68@NH2 with a pendant recognition site for selective detection of the nitro-aromatic explosive TNP in the aqueous phase. The pendant Lewis basic amine moieties are expected to selectively interact with TNP via electrostatic interactions and act as recognition sites for TNP. The MOF can detect the presence of TNP in water at a concentration as low as 0.4 ppm with a response time of a few seconds. In addition, both excitation and emission wavelengths of the MOF are in the visible region. The high selectivity was observed even in the presence of competing nitro analytes in the aqueous phase. The quenching constant for TNP was found to be 5.8 × 10(4) M(-1) which is 23 times higher than that for TNT and for RDX, demonstrating superior and selective quenching ability. This unprecedented selectivity is ascribed to electron-transfer and energy-transfer mechanisms as well as electrostatic interactions between TNP and the MOF. An MOF-coated paper strip that we prepared demonstrated fast and selective response to TNP in water, which represents a first step towards a practical application.

The toxic gas H2 S has recently emerged as one of the important signaling molecules in biological systems. Thus understanding the production, distribution, and mode of action of H2 S in biological system is important, but the fleeting and reactive nature of H2 S makes it a daunting task. Herein we report a biocompatible, nitro-functionalized metal-organic framework as reaction-based fluorescence turn-on probe for fast and selective H2 S detection. The selective turn-on performance of MOF remains unaffected even in presence of competing biomolecules., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Hydrogen sulphide (H2S) is known to play a vital role in human physiology and pathology which stimulated interest in understanding complex behaviour of H2S. Discerning the pathways of H2S production and its mode of action is still a challenge owing to its volatile and reactive nature. Herein we report azide functionalized metal-organic framework (MOF) as a selective turn-on fluorescent probe for H2S detection. The MOF shows highly selective and fast response towards H2S even in presence of other relevant biomolecules. Low cytotoxicity and H2S detection in live cells, demonstrate the potential of MOF towards monitoring H2S chemistry in biological system. To the best of our knowledge this is the first example of MOF that exhibit fast and highly selective fluorescence turn-on response towards H2S under physiological conditions.

Materials that can recognize the changes in their local environment and respond by altering their inherent physical and/or chemical properties are strong candidates for future "smart" technology materials. Metal-organic frameworks (MOFs) have attracted a great deal of attention in recent years owing to their designable architecture, host-guest chemistry, and softness as porous materials. Despite this fact, studies on the tuning of the properties of MOFs by external stimuli are still rare. This review highlights the recent developments in the field of stimulus-responsive MOFs or so-called smart MOFs. In particular, the various stimuli used and the utility of stimulus-responsive smart MOFs for various applications such as gas storage and separation, sensing, clean energy, catalysis, molecular motors, and biomedical applications are highlighted by using representative examples. Future directions in the developments of stimulus-responsive smart MOFs and their applications are proposed from a personal perspective., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Selective and sensitive nitro explosive detection by a porous luminescent metal-organic framework has been reported. For the first time MOF based selective explosive detection in the presence of other nitro analytes in aqueous media is demonstrated.

The development of solid-state proton-conducting materials with high conductivity that operate under both anhydrous and humidified conditions is currently of great interest in fuel-cell technology. A 3D metal-organic framework (MOF) with acid-base pairs in its coordination space that efficiently conducts protons under both anhydrous and humid conditions has now been developed. The anhydrous proton conductivity for this MOF is among the highest values that have been reported for MOF materials, whereas its water-assisted proton conductivity is comparable to that of the organic polymer Nafion, which is currently used for practical applications. Unlike other MOFs, which conduct protons either under anhydrous or humid conditions, this compound should represent a considerable advance in the development of efficient solid-state proton-conducting materials that work under both anhydrous and humid conditions., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A three-dimensional biporous soft porous coordination polymer containing active coordination space, made of cadmium(II) and a tripodal carboxylate ligand bearing ether linkages, was synthesized and characterized. Guest-dependent dynamic activities in the active coordination space of the soft porous crystal have been explored. We have demonstrated controlled chemical blocking and unblocking of active pores of the dynamic framework along with guest-dependent contraction and expansion of the channels by single-crystal-to-single-crystal structural transformation studies. Detailed studies revealed up to 70% contraction of the void volume and almost a 100 times increase in gas sorption by controlled phases obtained by guest switching. These types of soft materials with porous scaffolds, also known as soft porous crystals, may have general implications in the preparation of intelligent host materials with zeolitic properties and enzyme-like specificity.

On the move: Two isostructural, homochiral Cu(II) coordination frameworks based on amino acids (D- and L-PGA) were synthesized. Dynamic behavior by solid-state structural transformation in single-crystal-to-single-crystal fashion was demonstrated. The extent of structural dynamism was shown by guest inclusion studies. Reversible sol-gel formation and anion-tuning morphology of the compounds is also discussed., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Two polymorphic 2D-coordination polymers of composition [ZnL(HCO2)]∞ were synthesized from an in situ generated ligand [PO2(NH(4)Py)2](-) (L(-)). The ligand L(-) was generated by a facile metal-assisted P-N bond hydrolysis reaction from the corresponding phosphonium salt 1, [P(NH(4)Py)4]Cl, or from the neutral phosphoric triamide 2, [PO(NH(4)Py)3]. The de-solvated sample of the polymer [ZnL(HCO2)]∞ features polar micropores and shows a type I isotherm for CO2 sorption whereas a type II behaviour was observed for N2. The vapour sorption isotherm of the de-solvated sample of [ZnL(HCO2)]∞ shows preferential adsorption of water vapour over aliphatic alcohols.

A bistable dynamic coordination polymer [Ni(pca)(bdc)(0.5)(H(2)O)(2)] having a two-dimensional (2D) zigzag sheet structure is synthesized solvothermally. Topological analysis revealed that the frameworks have an hcb type of uninodal net. The compound exhibits guest specific reversible structural transformations accompanying reversible changes in physical properties driven by inherent flexibility and transformability.

A robust and water-stable porous coordination polymer [Cd(NDC)(0.5)(PCA)]·G(x) (1) (H(2)NDC = 2,6-napthalenedicarboxylic acid, HPCA = 4-pyridinecarboxylic acid, G = guest molecules) with new network topology has been synthesized solvothermally. The framework is 3D porous material and forms a 1D channel along the c-axis, with the channel dimensions ~9.48 × 7.83 Å(2). The compound has high selectivity in uptake of CO(2) over other gases (H(2), O(2), Ar, N(2), and CH(4)). The framework is highly stable in presence of water vapor even at 60 °C. The high CO(2) selectivity over other gases and water stability makes the compound promising candidate for industrial postcombustion gas separation application.