Search

In this article, we investigated the influence of molecular weight (Mw) on particle deposition efficiency after PEG-functionalized (polyethylene glycol-PEG) magnetoresponsive magnetic cluster targeting. In this work, the clusters were obtained by the solvothermal polyol method using polyethylene glycol (PEG) as a coating agent. So, we investigated three kinds of magnetoresponsive clusters: MNC-2000, MNC-6000, and MNC-10,000. These clusters were coated with PEG, and had molecular weights (Mw) of 2000 Da, 6000 Da, and 10,000 Da, respectively. The authors propose that the key to achieving maximum efficiency in targeted drug delivery is to deposit a thin, uniform layer of medication that covers the vascular wall in the area of interest. We defined a set of efficiency criteria to focus on the most essential characteristics of the targeting results. These are the obstruction degree, which measures the level of vessel obstruction; the magnet coverage degree, which evaluates the quality of particle deposition along the vessel wall; and the proximal deposition degree, which assesses the effect of pulsatile flow on deposition length. We performed several tests to determine how molecular weight affected these efficiency parameters. These tests examined (a) the effect of the injected cluster quantities, (b) the effect of the magnet distance, and (c) the effect of the injection period. Our findings indicate that an increase in PEG’s molar weight significantly impacts magnetic particle targeting efficiency.

L-poly(lactic acid), poly(3-hydroxybutyrate), and poly-hydroxybutyrate-co-hydroxyvalerate are biodegradable polymers that can be obtained from renewable biomass sources. The aim of this study was to develop three types of environmentally friendly film biocomposites of altered microstructure by combining each of the above-mentioned polymers with cellulose nanocrystal fillers and further processing the resulting materials via space-confined solvent vapor annealing. Cellulose was previously obtained from renewable biomass and further converted to cellulose nanocrystals by hydrolysis with the lactic acid. The solutions of biodegradable polymers were spin-coated onto solid substrates before and after the addition of cellulose nanocrystals. The obtained thin film composites were further processed via space-confined solvent vapor annealing to eventually favor their crystallization and, thus, to alter the final microstructure. Indeed, atomic force microscopy studies have revealed that the presence of cellulose nanocrystals within a biodegradable polymer matrix promoted the formation of large crystalline structures exhibiting fractal-, spherulitic- or needle-like morphologies.

This study aimed to analyze the production of poly(3-hydroxybutyrate) (PHB) from lignocellulosic biomass through a series of steps, including microwave irradiation, ammonia delignification, enzymatic hydrolysis, and fermentation, using the Bacillus megaterium ATCC 14581 strain. The lignocellulosic biomass was first pretreated using microwave irradiation at different temperatures (180, 200, and 220 °C) for 10, 20, and 30 min. The optimal pretreatment conditions were determined using the central composite design (CCD) and the response surface methodology (RSM). In the second step, the pretreated biomass was subjected to ammonia delignification, followed by enzymatic hydrolysis. The yield obtained for the pretreated and enzymatically hydrolyzed biomass was lower (70.2%) compared to the pretreated, delignified, and enzymatically hydrolyzed biomass (91.4%). These hydrolysates were used as carbon substrates for the synthesis of PHB using Bacillus megaterium ATCC 14581 in batch cultures. Various analytical methods were employed, namely nuclear magnetic resonance (1H-NMR and13C-NMR), electrospray ionization mass spectrometry (EI-MS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and thermogravimetric analysis (TGA), to identify and characterize the extracted PHB. The XRD analysis confirmed the partially crystalline nature of PHB.

Tea is the most consumed drink worldwide due to its pleasant taste and various beneficial effects on human health. This paper assesses the physicochemical analysis of different varieties of tea (leaves, flowers, and instant) after prior drying and fine grinding. The thermal decomposition behavior of the tea components shows that the tea has three stages of decomposition, depending on temperature. The first stage was attributed to the volatilization of water, while the second stage involved the degradation of volatiles, polyphenols, and fatty acids. The degradation of cellulose, hemicellulose, and lignin content occurs at the highest temperature of 400 °C in the third stage. A total of 66 volatile compounds, divided into eight classes, were identified in the tea samples. The volatile compounds were classified into nine odor classes: floral, fruity, green, sweet, chemical, woody, citrus, roasted, and alcohol. In all flower and leaf tea samples, monounsaturated (MUFAs), polyunsaturated (PUFAs), and saturated fatty acids (SFAs) were identified. A high content of omega-6 was quantified in acacia, Saint John’s Wort, rose, and yarrow, while omega-3 was found in mint, Saint John’s Wort, green, blueberry, and lavender samples. The flower and leaf tea samples studied could be a good dietary source of polyphenolic compounds, essential elements. In instant tea samples, a low quantity of polyphenols and major elements were identified. The physicochemical analysis demonstrated that both flower and leaf teas have high-quality properties when compared to instant tea.

L-polylactic acid (PLA), a semi–crystalline aliphatic polyester, is one of the most manufactured biodegradable plastics worldwide. The objective of the study was to obtain L-polylactic acid (PLA) from lignocellulosic plum biomass. Initially, the biomass was processed via pressurized hot water pretreatment at a temperature of 180 °C for 30 min at 10 MPa for carbohydrate separation. Cellulase and the beta-glucosidase enzymes were then added, and the mixture was fermented with Lacticaseibacillus rhamnosus ATCC 7469. The resulting lactic acid was concentrated and purified after ammonium sulphate and n-butanol extraction. The productivity of L-lactic acid was 2.04 ± 0.18 g/L/h. Then, the PLA was synthesized in two stages. Firstly, lactic acid was subjected to azeotropic dehydration at 140 °C for 24 h in the presence of xylene, using SnCl2 (0.4 wt.%) as a catalyst, resulting in lactide (CPLA). Secondly, microwave-assisted polymerization was carried out at 140 °C for 30 min with 0.4 wt.% SnCl2. The resulting powder was purified with methanol to produce PLA with 92.1% yield. The obtained PLA was confirmed using electrospray ionization mass spectrometry, nuclear magnetic resonance, thermogravimetric analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction. Overall, the resulting PLA can successfully replace the traditional synthetic polymers used in the packaging industry.

The interest in polymers with high thermal conductivity increased much because of their inherent properties such as low density, low cost, flexibility, and good chemical resistance. However, it is challenging to engineer plastics with good heat transfer characteristics, processability, and required strength. Improving the degree of the chain alignment and forming a continuous thermal conduction network is expected to enhance thermal conductivity. This research aimed to develop polymers with a high thermal conductivity that can be interesting for several applications. Two polymers, namely poly(benzofuran-co-arylacetic acid) and poly(tartronic-co-glycolic acid), with high thermal conductivity containing microscopically ordered structures were prepared by performing enzyme-catalyzed (Novozyme-435) polymerization of the corresponding α-hydroxy acids 4-hydroxymandelic acid and tartronic acid, respectively. A comparison between the polymer’s structure and heat transfer obtained by mere thermal polymerization before and enzyme-catalyzed polymerization will now be discussed, revealing a dramatic increase in thermal conductivity in the latter case. The polymer structures were investigated by FTIR spectroscopy, nuclear magnetic resonance (NMR) spectroscopy in liquid- and solid-state (ss-NMR), and powder X-ray diffraction. The thermal conductivity and diffusivity were measured using the transient plane source technique.

Due to the current concern with the environmental impacts produced by the construction industry, many studies have been conducted to capitalize on the advantages of waste to develop sustainable materials. The study reports an innovative, non-conventional cement-based composite material containing 10 wt.% vine shoot waste, representing a step forward toward the use of this lignocellulosic waste. The investigations were carried out using scanning electron microscopy with energy dispersive X-ray analysis, Fourier-transform infrared spectroscopy, thermogravimetric analysis, X-ray diffraction and solid-state 27Al and 29Si nuclear magnetic resonance spectroscopy. The addition of vine shoot waste to the cement paste increases the amount of hydration products (calcium silicate hydrate (CSH), calcium hydroxide (CH), calcium carbonate (CaCO3) and ettringite), leading to a more compact and dense structure. The structural characterization techniques also confirmed the formation of a higher amount of hydration products in the case of vine shoot waste added to the cement paste.

This study aimed to investigate the ways in which the thermal behavior, composition, and volatile compound contents of roasted coffee beans depend on variety and roasting intensity. The thermal analysis revealed various transformations in coffee composition, namely, drying, water loss, and decomposition of polysaccharides, lipids, amino acids, and proteins. The results showed that volatile compounds are released differently in coffee depending on coffee type and degree of roasting. The most abundant volatile compounds present in the samples were 2-butanone, furan, 2-methylfuran, methyl formate, 2.3-pentanedione, methylpyrazine, acetic acid, furfural, 5-methyl furfural, and 2-furanmethanol. The total polyphenol contents ranged between 13.3 and 18.9 g gallic acid/kg, being slightly higher in Robusta than in Arabica varieties and in more intensely roasted beans compared to medium-roasted beans. The Robusta variety has higher mineral contents than Arabica, and the contents of most minerals (K, Ca, Mg, Fe, Cu, P, N, and S) increased with roasting intensity. Discrimination between coffee varieties and roasting intensities is possible based on mineral and polyphenol contents.

In this study the adsorption and photodegradation capabilities of modified multi-walled carbon nanotubes (MWCNTs), using tartrazine as a model pollutant, is demonstrated. MWCNT-COOH/Fe3O4 and MWCNT-COOH/Fe3O4/NiO nanocomposites were prepared by precipitation of metal oxides in the presence of MWCNTs. Their properties were examined by X-ray diffraction in powder (XRD), Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Raman spectroscopy, synchrotron-based Scanning PhotoElectron Microscopy (SPEM), and Brunauer-Emmett-Teller (BET) analysis. It was found that the optimal adsorption conditions were pH 4 for MWCNT-COOH/Fe3O4 and pH 3 for MWCNT-COOH/Fe3O4/NiO, temperature 25 °C, adsorbent dose 1 g L−1, initial concentration of tartrazine 5 mg L−1 for MWCNT-COOH/Fe3O4 and 10 mg L−1 for MWCNT-COOH/Fe3O4/NiO and contact time 5 min for MWCNT-COOH/Fe3O4/NiO and 15 min for MWCNT-COOH/Fe3O4. Moreover, the predominant degradation process was elucidated simultaneously, with and without simulated sunlight irradiation, using thermal lens spectrometry (TLS) and UV–Vis absorption spectrophotometry. The results indicated the prevalence of the photodegradation mechanism over adsorption from the beginning of the degradation process.

In the context of an increased interest in the abatement of CO2 emissions generated by industrial activities, CO2 hydrogenation processes show an important potential to be used for the production of valuable compounds (methane, methanol, formic acid, light olefins, aromatics, syngas and/or synthetic fuels), with important benefits for the decarbonization of the energy sector. However, in order to increase the efficiency of the CO2 hydrogenation processes, the selection of active and selective catalysts is of utmost importance. In this context, the interest in graphene-based materials as catalysts for CO2 hydrogenation has significantly increased in the last years. The aim of the present paper is to review and discuss the results published until now on graphene-based materials (graphene oxide, reduced graphene oxide, or N-dopped graphenes) used as metal-free catalysts or as catalytic support for the thermocatalytic hydrogenation of CO2. The reactions discussed in this paper are CO2 methanation, CO2 hydrogenation to methanol, CO2 transformation into formic acid, CO2 hydrogenation to high hydrocarbons, and syngas production from CO2. The discussions will focus on the effect of the support on the catalytic process, the involvement of the graphene-based support in the reaction mechanism, or the explanation of the graphene intervention in the hydrogenation process. Most of the papers emphasized the graphene’s role in dispersing and stabilizing the metal and/or oxide nanoparticles or in preventing the metal oxidation, but further investigations are needed to elucidate the actual role of graphenes and to propose reaction mechanisms.

Four N-doped graphene materials with a nitrogen content ranging from 8.34 to 13.1 wt.% are prepared by the ball milling method. This method represents an eco-friendly mechanochemical process that can be easily adapted for industrial-scale productivity and allows both the exfoliation of graphite and the synthesis of large quantities of functionalized graphene. These materials are characterized by transmission and scanning electron microscopy, thermogravimetry measurements, X-ray powder diffraction, X-ray photoelectron and Raman spectroscopy, and then, are tested towards the oxygen reduction reaction by cyclic voltammetry and rotating disk electrode methods. Their responses towards ORR are analysed in correlation with their properties and use for the best ORR catalyst identification. However, even though the mechanochemical procedure and the characterization techniques are clean and green methods (i.e., water is the only solvent used for these syntheses and investigations), they are time consuming and, generally, a low number of materials can be prepared, characterized and tested. In order to eliminate some of these limitations, the use of regression learner and reverse engineering methods are proposed for facilitating the optimization of the synthesis conditions and the materials’ design. Thus, the machine learning algorithms are applied to data containing the synthesis parameters, the results obtained from different characterization techniques and the materials response towards ORR to quickly provide predictions that allow the best synthesis conditions or the best electrocatalysts’ identification.

Ni/oxide-SiO2 (oxide: MgO, CeO2, La2O3, 10 wt.% target concentration) catalyst samples were prepared by successive impregnation of silica matrix, first with supplementary oxide, and then with Ni (10 wt.% target concentration). The silica matrix with multimodal pore structure was prepared by solvothermal method. The catalyst samples were structurally characterized by N2 adsorption-desorption, XRD, SEM/TEM, and functionally evaluated by temperature programmed reduction (TPR), and temperature programmed desorption of hydrogen (H2-TPD), or carbon dioxide (CO2-TPD). The addition of MgO and La2O3 leads to a better dispersion of Ni on the catalytic surface. Ni/LaSi and Ni/CeSi present a higher proportion of moderate strength basic sites for CO2 activation compared to Ni/Si, while Ni/MgSi lower. CO2 methanation was performed in the temperature range of 150–350 °C and at atmospheric pressure, all silica supported Ni catalysts showing good CO2 conversion and CH4 selectivity. The best catalytic activity was obtained for Ni/LaSi: CO2 conversion of 83% and methane selectivity of 98%, at temperatures as low as 250 °C. The used catalysts preserved the multimodal pore structure with approximately the same pore size for the low and medium mesopores. Except for Ni/CeSi, no particle sintering occurs, and no carbon deposition was observed for any of the tested catalysts.

Background: The aim of this study was to explore the rare variants in a cohort of Romanian index cases with hypertrophic cardiomyopathy (HCM). Methods: Forty-five unrelated probands with HCM were screened by targeted next generation sequencing (NGS) of 47 core and emerging genes connected with HCM. Results: We identified 95 variants with allele frequency < 0.1% in population databases. MYBPC3 and TTN had the largest number of rare variants (17 variants each). A definite genetic etiology was found in 6 probands (13.3%), while inconclusive results due to either known or novel variants were established in 31 cases (68.9%). All disease-causing variants were detected in sarcomeric genes (MYBPC3 and MYH7 with two cases each, and one case in TNNI3 and TPM1 respectively). Multiple variants were detected in 27 subjects (60%), but no proband carried more than one causal variant. Of note, almost half of the rare variants were novel. Conclusions: Herein we reported for the first time the rare variants identified in core and putative genes associated with HCM in a cohort of Romanian unrelated adult patients. The clinical significance of most detected variants is yet to be established, additional studies based on segregation analysis being required for definite classification.

Previous studies have shown that the transition from the University environment to remote learning impacted student mental health. Our study aimed to investigate the effects of university environment on anxiety and depressive symptoms in health sciences students. Students at the Technical University of Manabí, Ecuador, with 6–10 in-person semesters, who shifted to remote learning and then returned to face-to-face learning were selected. Students responded to the General Anxiety Disorder-7 (GAD-7) and Patient Health Questionnaire-9 (PHQ-9). In addition, questions regarding social interaction, physical exercise, mood and sleep habits were also asked. This longitudinal study tracked 323 students during the return to in-person classes and term end. The results showed similar rates of anxiety (GAD-7, p = 0.011-p = 0.002) and depression (PHQ-9 p = 0.001-p = 0.032) among students at week 1 and week 15. Previous diagnosis of depression (OR, 0.171; CI 0.050–0.579, p < 0.005) was shown to correlate with depression levels in week 1, with no changes seen at follow-up. Anxiety levels were shown to be associated with a previous diagnosis of the disorder at week 1, but not at follow-up (OR 0.233; CI 0.085–0.643, p < 0.005). The return to in-person learning among university students maintained levels of anxiety and depressive symptoms, underscoring ongoing vulnerabilities to mental health disorders in this group.

For personal and socioeconomic development, education is a fundamental element. However, despite its relevance and importance, there is no inclusive education that allows access to the entire population. This is especially noticeable in contexts where students are at risk of exclusion. This paper presents a project that aims to reduce the technological gap in the most disadvantaged social classes by promoting the use of Augmented Reality technology. To this end, an experience with children at risk of social exclusion is presented, in which they participated in two training workshops over two weeks, organized into two groups, where one group used Augmented Reality with Tablets and the other did not. The objective of the experience was to assess the impact of using this technology on the emotional state of the students, as well as on the development of computational thinking competence. The results show that students who used Augmented Reality significantly improved their academic results in block programming compared to those who did not use it. Additionally, it was found that the emotional state of the former was generally more pleasant compared to the latter.

O trabalho busca inicialmente entender o conceito de formação cultural (Bildung) em Hegel (1770-1831), a fim de apreender como o filósofo aborda os direitos humanos e a educação, partindo do conceito de formação cultural (Bildung) em suas obras. Para tal, visitamos a formação do sistema escolar alemão com a finalidade de compreender o ideário cultural dos séculos XVIII e XIX europeu, contextualizando a perspectiva hegeliana de solução para a educação, a saber, “Qual a melhor forma de educar o homem?”, imposto a todo e qualquer projeto educacional. Assim como também, pretendeu-se, trazer à compreensão acerca dos direitos humanos e seu desenvolvimento da modernidade à contemporaneidade. Onde defende-se que as ideias contidas na filosofia hegeliana sejam uma possibilidade de se ultrapassar alguns limites existentes nas discussões tradicionais a respeito do tema, embasadas principalmente nas filosofias modernas do direito natural. Para tanto, optou-se por analisar a relação dos direitos humanos com a filosofia do direito natural, seguindo-se para a crítica hegeliana ao jusnaturalismo e, consequentemente, encerrando-se com sua compreensão de reconhecimento e sua influência na Filosofia do Direito e no estabelecimento das relações éticas.

This study evaluated the efficacy of semisolid systems (gels) and films containing a combination of metronidazole (MTZ) and metronidazole benzoate after scaling and root-planing (SRP) for periodontitis. In total, 45 patients with stage I or II periodontitis were enrolled and divided into 3 groups: 1—SRP—control; 2—SRP + Film with MTZ; 3—SRP + Gel with MTZ. The pH of gingival crevicular fluid (GCF) before/after treatments, MTZ concentrations, and drug release using high-performance liquid chromatography were investigated. The effects were evaluated by longitudinal monitoring of clinical parameters (probing depth—PD, clinical attachment level—CAL, and bleeding on probing—BP). MTZ and MTZ-benzoate concentrations in the periodontal pocket and pH showed no statistical difference after application. SRP + Gel presented the lowest CAL values. For SRP + Film and SRP + Gel, higher PD values were observed at T0 compared to all groups. A relevant reduction in BP was observed in SRP + Film and SRP + Gel groups at all times compared to T0. Both therapies improved periodontal health compared to SRP alone, reducing PD and BP, and increasing CAL for the gel group, suggesting they are promising for periodontal disease treatment.

Only within the last few years has the American Psychological Association (APA) acknowledged the impact that the racist history of psychology training, research, and practice has had on people of color (APA, October 2021). As the primary governing organization of psychology, the field looks to the APA to model the possibility of an anti-racist approach to psychology. Training competencies, such as “professionalism,” have persisted as a core foundational skill, yet there is no consensus regarding the definition or essential elements of the competency (Elman et al., 2005; Grus et al., 2018). The lack of clarity in definition and essential elements has left supervising health service psychologists to form more subjective assessments that may be rooted within the field’s racist history. It is therefore unsurprising that professionalism is a concept that has long been weaponized against Black people, Indigenous people, and people of color (BIPOC) in medical and educational settings (Marom, 2019). To address this problem in a School Psychology doctoral program, participatory action research (PAR) methods were utilized to take action towards the creation of an equitable, inclusive, experiential definition of professionalism to reduce opportunities for racist and other discriminatory evaluation. Students and faculty were involved in every phase of the project, from the inception through multiple rounds of analysis and member checking. The result was a programmatic Essence Statement of professionalism, core beliefs about professionalism, and a table of professionalism competencies with definitions and behavioral exemplars, all of which are now codified in the School Psychology Program Handbook and available to all current and prospective students and faculty. The outlined methods can be implemented by professionals across disciplines and systems to actively reduce inequalities in settings where individuals with diverse and intersection identities evaluated by these systems have traditionally been excluded from the processes that impact them.

Alveolar ridge preservation (ARP) is a well-documented procedure to maintain bone volume after tooth extraction in order to place implants. However, at the end of the healing process, the residual biomaterial that is not reabsorbed remains embedded in the bone over time. Ribose cross-linked biomaterials demonstrated their ability to promote osteoconduction and complete resorption. The aim of this study was to evaluate the histological healing pattern of a novel ribose cross-linked collagen sponge used as a grafting material left exposed in human sockets at the time of tooth extraction. On a single patient, non-restorable lower first molars were extracted on both sides, and a ribose cross-linked collagen sponge was placed bilaterally in the cavities and left uncovered at the end of the surgery. After six months, core biopsies were taken immediately prior to implant placement; after the sample preparation, a histological analysis was performed. The results are very promising for substitution with newly formed bone and the amount of residual material. Ribose cross-linked collagen sponge could represent a valid alternative to conventional biomaterials for ARP procedures with no need for flap advancement and/or the addition of a membrane to cover the graft, reducing the invasiveness, complexity, and costs of the treatment.