Search

Phthalates are chemical compounds added to plastic materials to provide flexibility. They are used in numerous consumer products including children’s toys and child care articles. Exposure to phtha...

The multiple therapeutic potentials of tetracycline and its worldwide usage have encouraged researchers to develop various methods for its assay in various matrices and for different purposes. In this regard, different analytical techniques have been exploited. Among those techniques is flow injection (FI), which is an extended family of three generations and five versions. The current manuscript reviews the utilization of FI techniques for developing assay methods for tetracycline. The review covers more than forty methods, since the inception of FI techniques and up to date. The review highlights the advantages of the application of FI techniques for quantification of tetracycline in terms of reagent consumption, sample frequency, accuracy, and practitioner safety, besides instrumentation simplicity and cost-effectiveness. The review also addresses applications to several matrices ranging from simple matrices such as standard solutions and pharmaceutical formulations to complex matrices such as biological fluids and food. Prior to the review, a brief background on the principles and developments of FI techniques is illustrated.

Background Myrtus communis is a typical plant of Mediterranean area. The different parts of this plant such as berries, branches, and leaves have been used worldwide as a traditional/folk medicine for the treatment of various ailments and diseases. Methods Ethanolic leaf extract of the plant was prepared by Soxhlet extraction method. Zone of inhibition, minimum inhibitory concentration and minimal bactericidal concentration were determined by well diffusion method and microplate alamar blue assay. GC-MS analysis was carried out to identify the compounds present in the extract. Microscopy and ImageJ software were used respectively for morphology and cell-length measurements. GraphPad Prism was used for statistical analysis. Results The ethanolic extract showed strong inhibitory effect against Gram-positive and acid-fast bacteria with significant inhibition-zone size (9–25 mm), MIC (4.87–78 μg/ml), as well as MBC (0.3–20 mg/ml). However, no effect was observed on the growth of Gram-negative bacteria. The growth inhibition was found to be associated with the damage of cell wall as the extract-treated cells were sensitive to cell wall-targeting antibiotics and displayed the cell wall damage-depicting morphological defects. GC-MS analysis confirmed the presence of novel compounds in addition to the most representative compounds of the essential oils/extracts of M. communis of other country origins. Conclusion These results demonstrate that M. communis leaf extract could be the source of compounds to be used for the treatment of Gram-positive bacterial infections. This is the first report, which provides insights into the mechanism of action of the extract in inhibiting the growth of Gram-positive bacteria.

Packed-bed plasma reactors (PBPRs) have been investigated extensively to study the abatement of volatile organic compounds such as toluene. Previous studies have reported that the applied voltage (or power) is a critical parameter that affects the performance of PBPRs. However, the origin of this change in performance is not well understood. A conventional PBPR contains irregularly filled dielectric pellets that generate several micro- and mesoscopic voids in between the pellets and between pellets and dielectric walls where filamentary discharges are generated. These voids are optically inaccessible and the reaction products are often generated in gaseous form; therefore, the location of the chemical reactions within these voids could not be studied. In this work, we have qualitatively investigated the influence of the applied voltage on the locations of chemical reactions in the void using toluene oxidation as an example. Using a single layer of regularly arranged hemispherical pellets and a transparent electrode in a PBPR, the plasma generation within these voids became optically accessible. The operating conditions were tailored to enhance the deposition of solid or liquid products on the glass beads to understand the locations of chemical reactions. The intensified charged coupled device camera images of the discharge through the transparent electrode show that the distribution of plasma emission changes with the applied voltage amplitude. The distribution of the deposited/condensed solid/liquid intermediates and reaction products was found to match the plasma emission. The analysis of the reaction products and deposition/condensation locations indicates that short-living species such as energetic electrons, OH and O radicals might play an essential role in the formation of deposited chemicals on the glass beads.

Advanced oxidation processes using UV and catalysts like TiO2 and ZnO have been recently applied for the photocatalytic degradation of MTBE in water. Attempts have been made to replace the UV radiation by the solar spectrum. This review intends to shed more light on the work that has been done so far in this area of research. The information provided will help in crystallizing the ideas required to shift the trend from UV photocatalysis to sunlight photocatalysis. The careful optimization of the reaction parameters and the type of the dopant employed are greatly responsible for any enhancement in the degradation process. The advantage of shifting from UV photocatalysts to visible light photocatalysts can be observed when catalysts like TiO2 and ZnO are doped with suitable metals. Therefore, it is expected that in the near future, the visible light photocatalysis will be the main technique applied for the remediation of water contaminated with MTBE.

A series of heterogeneous catalysts was prepared by doping zinc oxide with different palladium loadings in the range of 0.5%-1.5%. The prepared catalysts were characterized by SEM, TEM and XRD. These catalysts were applied to study the degradation of Methyl tert-Butyl Ether (MTBE). An amount of 100 mg of each of these catalysts was added to an aqueous solution of 100 ppm of MTBE. The resulting mixtures were irradiated with UV light for a period of 5 h. A 99.7% removal of MTBE was achieved in the case of the zinc oxide photocatalyst particles doped with 1% Pd. The photoreaction was found to be a first-order one.

The levels of four metals (Zn, Cu, Cd, and Pb) were evaluated in two fruit types (apricot and fig), a fruity vegetable (tomato), and three leafy vegetables (arugula, spinach, and lettuce) that are commonly grown and consumed in Aseer Region, Saudi Arabia. Flame atomic absorption spectrophotometry was employed for quantification. The quality of results was checked by a certified reference material (NIST SRM 1570a). Good recovery values in the range of 87-104% were achieved. Metals were quantified in washed and unwashed samples to evaluate the effect of washing. Statistically, no significant difference was noticed (p>0.05), except for Zn in arugula and Cu in apricot and spinach. The levels of metals found in the analyzed fruits and vegetables were in their normal ranges in crops and not posing any serious risks to the consumers in Aseer Region. The toxic elements Pb and Cd were well below the maximum levels set in the Saudi and international food standards. Zn and Cu levels were comparable to the ranges reported in worldwide previous studies.

Tyrosol and farnesol are quorum-sensing molecules produced by Candida albicans which accelerate and block, respectively, the morphological transition from yeasts to hyphae. In this study, we have investigated the secretion of tyrosol by C. albicans and explored its likely role in biofilm development. Both planktonic (suspended) cells and biofilms of four C. albicans strains, including three mutants with defined defects in the Efg 1 and Cph 1 morphogenetic signaling pathways, synthesized extracellular tyrosol during growth at 37°C. There was a correlation between tyrosol production and biomass for both cell types. However, biofilm cells secreted at least 50% more tyrosol than did planktonic cells when tyrosol production was related to cell dry weight. The addition of exogenous farnesol to a wild-type strain inhibited biofilm formation by up to 33% after 48 h. Exogenous tyrosol appeared to have no effect, but scanning electron microscopy revealed that tyrosol stimulated hypha production during the early stages (1 to 6 h) of biofilm development. Experiments involving the simultaneous addition of tyrosol and farnesol at different concentrations suggested that the action of farnesol was dominant, and 48-h biofilms formed in the presence of both compounds consisted almost entirely of yeast cells. When biofilm supernatants were tested for their abilities to inhibit or enhance germ tube formation by planktonic cells, the results indicated that tyrosol activity exceeds that of farnesol after 14 h, but not after 24 h, and that farnesol activity increases significantly during the later stages (48 to 72 h) of biofilm development. Overall, our results support the conclusion that tyrosol acts as a quorum-sensing molecule for biofilms as well as for planktonic cells and that its action is most significant during the early and intermediate stages of biofilm formation.