Search

Bronchoscopy is a widely used technique for diagnostic and therapeutic purposes. Though it requires anesthesia, many options are available, depending on the patient’s health status, the purpose of the procedure, and the type of bronchoscope used. One such health status is heart failure, a leading cause of death, and a common challenge of anesthesiology. We report a 60-year-old male patient who is a known case of heart failure with an ejection fraction of 15%, and an implanted cardioverter defibrillator, along with concurrent ischemic heart disease, diabetes mellitus, and hypertension, who presented complaining of dysphagia. This highly morbid patient was able to successfully undergo a bronchoscopic biopsy with nerve block anesthesia considering his inadequacy for conventional methods. This report aims to shed light on these challenging cases and alert anesthesiologists on how to manage such situations in patients with cardiac morbidities.

Appendicitis is the most common cause of acute abdominal pain requiring surgical intervention; however, it is extremely rare in infants. Its diagnosis and treatment are challenging due to nonspecific clinical signs and symptoms. As a result, delayed or missed diagnosis is common in young children and is associated with an increased risk of perforation and peritonitis. We reported a case of a 4-month-old healthy male child. The patient presented with abdominal distention and fever. After ruling out other possible causes, he was diagnosed with acute appendicitis, which was confirmed by a CT scan. A gangrenous appendix, dilated bowel loops, and free fluid in the abdomen were discovered during surgery. An appendectomy was performed. The appendix in infants has an average length of 4.5 cm compared with 9.5 cm in adults. Infantile appendicitis is considered rare but cases have been documented also in neonates, misdiagnosis rates are high due to rarity in this age group in addition to nonspecific signs and symptoms, which led to a high perforation rate. Ultrasonography can diagnose appendicitis in children with a sensitivity and specificity of 90%-95% without subjecting the child to radiation. A physician should always keep the diagnosis of appendicitis in mind in the infant age group, even though it is rare, as a delay in diagnosis and treatment has been associated with an increased risk of complications including appendicular perforation and peritonitis.

Abstract Water scarcity and droughts are among the most challenging issues worldwide, particularly in arid and semi-arid regions like Saudi Arabia. Date palm (Phoenix dactylifera L.), a major crop in Saudi Arabia, is being significantly affected by water scarcity, soil salinity, and desertification. Alternative water sources are needed to conserve freshwater resources and increase date palm production in Saudi Arabia. On the other hand, Saudi Arabia has a significant number of aquaculture farms that generate substantial amounts of wastewater, which can be utilized as an alternative source of irrigation. Therefore, this study aimed to assess the potential of aquaculture wastewater as an alternative irrigation source for date palm orchards. Aquaculture wastewater was collected from 12 different farms (Al-Kharj, Al-Muzahmiya, and Al-Qassim regions, Saudi Arabia) and its quality was analyzed. The impacts of aquaculture wastewater irrigation on soil quality, nutrient availability, nutrient status of date palm trees, and dates fruit quality were assessed in comparison to source water (freshwater) irrigation at Al-Kharj, Al-Muzahmiya, and Al-Qassim regions. The water quality analyses showed higher salinity (EC = 3.31 dSm−1) in farm Q3, while all other farms demonstrated no salinity, sodicity, or alkalinity hazards. Moreover, the aquaculture wastewater irrigation increased soil available P, K, NO3 −–N, and NH4 +–N by 49.31%, 21.11%, 33.62%, and 52.31%, respectively, compared to source water irrigation. On average, date palm fruit weight, length, and moisture contents increased by 26%, 23%, and 43% under aquaculture wastewater irrigation compared to source water irrigation. Further, P, K, Fe, Cu, and Zn contents in date palm leaf were increased by 19.35%, 34.17%, 37.36%, 38.24%, and 45.29%, respectively, under aquaculture wastewater irrigation compared to source water irrigation. Overall, aquaculture wastewater irrigation significantly enhanced date palm plant growth, date palm fruit quality, and soil available nutrients compared to freshwater irrigation. It was concluded that aquaculture wastewater can be used as an effective irrigation source for date palm farms as it enhances soil nutrient availability, date palm growth, and date fruit yield and quality. The findings of this study suggest that aquaculture wastewater could be a viable alternative for conserving freshwater resources and increase date palm production in Saudi Arabia.

Diabetes is a widespread disease that needs to be controlled. Therapeutic monitoring of drugs is very helpful in maintaining desirable doses. To study a correlation between the blood level of metformin (to a lesser extent, glimepiride) and genotyping (mainly the SULT1A1 genotype). Determine drug levels using a validated liquid chromatography-tandem mass spectrometry (LC-MS/MS) tool. A validated LC-MS/MS method was developed to determine metformin and glimepiride levels in human plasma. DNA extraction was performed using Jena Bioscience’s Blood DNA preparation, in which a column kit was used to extract DNA for genetic polymorphism. The investigation was carried out using both medications in type 2 diabetes patients alongside the genetic polymorphism. One hundred and six patients were assessed. The prevalence of homozygosity for SULT1A1 and wild-type CYP2D6 * 4 were 72.6% and 73.6%, respectively. After adjustment for daily intake of metformin, three patients out of five with the highest levels of metformin had no homozygosity (SULT1A1 genotype). Statistically, variables that demonstrated an insignificant correlation with the level of metformin were body mass index (rs (87) = 0.32, P = 0.011) and age (rs (87) =0.26, P = 0.017). The homozygous (SULT1A1 genotype) correlation was moderate (rs (87) =0.21, P = 0.052). According to the findings, patients with the wt/wt CYP2D6 genotype had considerably greater levels of endoxifen than those with the v/v CYP2D6 genotype. The study’s results reported a probable correlation between the blood level of metformin (to a lesser extent, glimepiride) and genotyping (mainly the SULT1A1 genotype). Genotype-guided drug therapy may provide a novel contribution to maximize drug efficacy and/or minimize toxicity.

Abstract One of the most significant environmental issues worldwide is garbage, particularly waste from construction materials, which is generated in substantial numbers. However, in the building industry, the significant extraction of natural resources such as cement, natural sand, and natural gravel poses a critical environmental challenge, depleting these resources at an alarming rate. There are some solutions that developed countries are resorting to, namely the division of construction waste into groups, where it is reused under the name of recycling construction waste to produce new, environmentally friendly building materials. The aim of this research includes a laboratory process study as it includes the use of the following ratios: 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, and 100%, under the process of replacing coarse plain aggregates including coarse recycled aggregates and studying the most important mechanical properties of concrete. This research was carried out using fresh concrete properties such as workability tests and hardened concrete properties such as compressive strength, splitting, and flexural tensile strength examined at the durations of 7, 14, and 28 days. The research includes the investigation of the three main properties of concrete. After conducting the tests, the results have shown that the main property of recycled concrete is lower strength than that of conventional concrete, but it can be said that it is within the limits that can be used for construction. The results also showed that compared to normal aggregates, development in the recycled aggregate percentage rates reduces the operational workability of concrete. The research proved that the maximum decrease in compressive, flexural, and tensile strength, density and the slump were 19.4, 18.3, 19.6, 19.5, and 25.0% respectively compared to the control concrete samples.

Mortality rate due to coronary artery disease (CAD) is elevated among diabetes mellitus (DM) compared to non-DM patients. Endothelin 1 (ET-1), a potent vasoconstrictor, is implicated in the pathophysiology of both CAD and DM. The impact of ET-1 on the short-term clinical outcomes following revascularization by percutaneous coronary intervention (PCI) and coronary artery bypass surgery (CABG) remains unclear. We investigated the impact of ET-1 on clinical outcomes and revascularization strategies in CAD patients, exploring the role of DM on modifying these relationships. In a prospective observational study, patients presenting to cardiac catheterization lab for CAD evaluation at a Jordanian hospital were enrolled and stratified by status of CAD and DM. Plasma levels of ET-1 were measured before catheterization. Short-term clinical outcomes and prognosis were compared.Among 815 enrolled patients (603 CAD and 212 controls), DM prevalence was higher among CAD patients than non-CAD. Plasma ET-1 levels were measured in 490 random patients and were associated with CAD and the need for revascularization. Multivariate analysis independently revealed higher plasma ET-1 levels in DM patients requiring revascularization. Short-term follow-up for 366 patients (median of 4 months) showed that 132 developed one cerebro/cardiovascular event, predominantly among DM patients. Baseline ET-1 was not associated with higher risk of the first event. Notably, revascularization by PCI was associated with lower event risk in DM patients.Our study indicates that plasma ET-1 levels are associated with the need for revascularization in DM patients, with those undergoing PCI having a lower risk of initial cerebro/cardiovascular events.

Magnesium (Mg) and its alloys are emerging as a structural material for the aerospace, automobile, and electronics industries, driven by the imperative of weight reduction. They are also drawing notable attention in the medical industries owing to their biodegradability and a lower elastic modulus comparable to bone. The ability to manufacture near-net shape products featuring intricate geometries has sparked huge interest in additive manufacturing (AM) of Mg alloys, reflecting a transformation in the manufacturing sectors. However, AM of Mg alloys presents more formidable challenges due to inherent properties, particularly susceptibility to oxidation, gas trapping, high thermal expansion coefficient, and low solidification temperature. This leads to defects such as porosity, lack of fusion, cracking, delamination, residual stresses, and inhomogeneity, ultimately influencing the mechanical, corrosion, and surface properties of AM Mg alloys. To address these issues, post-processing of AM Mg alloys are often needed to make them suitable for application. The present article reviews all post-processing techniques adapted for AM Mg alloys to date, including heat treatment, hot isostatic pressing, friction stir processing, and surface peening. The utilization of these methods within the hybrid AM process, employing interlayer post-processing, is also discussed. Optimal post-processing conditions are reported, and their influence on the microstructure, mechanical, and corrosion properties are detailed. Additionally, future prospects and research directions are proposed.

Due to its environmental, economic, and durability advantages, sustainable concrete has considerably increased the potential of research in recent years. This paper investigates how rubber waste affects the mechanical properties, durability, and microstructure of the concrete matrix. Industrial rubber such as ground latex gloves (LG) and silicone catheters (SC), are substituted for coarse aggregate in concrete mixes. Workability, density, compressive strength, water absorption, ultrasonic pulse velocity, and scanning electron microscope (SEM) tests are applied to examine the performance and properties of the modified concrete. The impact of high temperatures on concrete containing industrial rubber is also examined. To achieve this objective, the samples are tested at normal and high temperatures (room temperature, 200 °C, and 400 °C, respectively) and four substitution levels are used (2.5%, 5%, 7.5%, and 10%) by weight. The results illustrate that the inclusion of different percentages of the LG and SC significantly improves the water absorption of the concrete samples. In addition, the density of concrete containing recycled rubber decreases by 34%. Compressive strength decreased by 86% and 59% at a replacement level of 10% for LG and SC, respectively. High-temperature level has shown a significant effect on the properties of rubberized concrete. This study establishes the possibility of incorporating LG and SC at limited replacement levels in concrete; thereby, proving that these materials are applicable in industrial use.

Abstract This paper presents a tunable multi-threshold micro-electromechanical inertial switch with adjustable threshold capability. The demonstrated device combines the advantages of accelerometers in providing quantitative acceleration measurements and g-threshold switches in saving power when in the inactive state upon experiencing acceleration below the thresholds. The designed proof-of-concept device with two thresholds consists of a cantilever microbeam and two stationary electrodes placed at different positions in the sensing direction. The adjustable threshold capability and the effect of the shock duration on the threshold acceleration are analytically investigated using a nonlinear beam model. Results are shown for the relationships among the applied bias voltage, the duration of shock impact, and the tunable threshold. The fabricated prototypes are tested using a shock-table system. The analytical results agree with the experimental results. The designed device concept is very promising for the classification of the shock and impact loads in transportation and healthcare applications.

Abstract There is a growing interest in the research and development of Cable Driven Rehabilitation Devices (CDRDs) due to multiple inherent features attractive to clinical applications, including low inertia, lightweight, high payload-to-weight ratio, large workspace, and modular design. However, previous CDRDs have mainly focused on modifying motor impairment in the sagittal plane, despite the fact that neurological disorders, such as stroke, often involve postural control and gait impairment in multiple planes. To address this gap, this work introduces a novel framework for designing a cable-driven lower limb rehabilitation exoskeleton which can assist with bi-planar impaired posture and gait. The framework used a lower limb model to analyze different cable routings inspired by human muscle architecture and attachment schemes to identify optimal routing and associated parameters. The selected cable routings were safeguarded for non-interference with the human body while generating bi-directional joint moments. The subsequent optimal cable routing model was then implemented in simulations of tracking reference healthy trajectory with bi-planar impaired gait (both in the sagittal and frontal planes). The results showed that controlling joints independently via cables yielded better performance compared to dependent control. Routing long cables through intermediate hinges reduced the peak tensions in the cables, however, at a cost of induced additional joint forces. Overall, this study provides a systematic and quantitative in silico approach, featured with accessible graphical user interface (GUI), for designing subject-specific, safe, and effective lower limb cable-driven exoskeletons for rehabilitation with options for multi-planar personalized impairment-specific features.

For separation and recovery of different but chemically similar metal from dilute wastewater with reduced process complexity and cost, a supported liquid membrane (SLM) system that utilizes a single carrier together with strip dispersion for selective stripping of coextracted metal ions was proposed to enable concurrent separation and recovery. This study aims to investigate the effectiveness of the proposed SLM system for separative recovery of copper and zinc from real plating wastewater. Solvent extraction experiments were conducted to understand the effect of feed pH and carrier concentration on organic phase migration to the aqueous phase. The effect of stirring speed on the SLM transport rate was studied using synthetic feed. Combined with the insights from our previous study, appropriate settings were identified and applied to the SLM system. The SLM system could recover 83.7% copper with 91.0% purity and 85.5% Zn with 99.3% purity from the plating wastewater in 30 h. The findings indicate the feasibility of using SLM with selective stripping for the concurrent separation and recovery of copper and zinc from a dilute aqueous waste stream predominantly containing these two metals.

BackgroundFamilial hypercholesterolemia (FH) is an autosomal dominant disorder characterized by increased LDL-cholesterol levels. About 85% of FH cases are caused by LDLR mutations encoding the low-density lipoprotein receptor (LDLR). LDLR is synthesized in the endoplasmic reticulum (ER) where it undergoes post-translational modifications and then transported through Golgi apparatus to the plasma membrane. Over 2900 LDLR variants have been reported in FH patients with limited information on the pathogenicity and functionality of many of them. This study aims to elucidate the cellular trafficking and functional implications of LDLR missense variants identified in suspected FH patients using biochemical and functional methods.MethodsWe used HeLa, HEK293T, and LDLR-deficient-CHO-ldlA7 cells to evaluate the subcellular localization and LDL internalization of ten LDLR missense variants (p.C167F, p.D178N, p.C243Y, p.E277K, p.G314R, p.H327Y, p.D477N, p.D622G, p.R744Q, and p.R814Q) reported in multiethnic suspected FH patients. We also analyzed the functional impact of three variants (p.D445E, p.D482H, and p.C677F), two of which previously shown to be retained in the ER.ResultsWe show that p.D622G, p.D482H, and p.C667F are largely retained in the ER whereas p.R744Q is partially retained. The other variants were predominantly localized to the plasma membrane. LDL internalization assays in CHO-ldlA7 cells indicate that p.D482H, p.C243Y, p.D622G, and p.C667F have quantitatively lost their ability to internalize Dil-LDL with the others (p.C167F, p.D178N, p.G314R, p.H327Y, p.D445E, p.D477N, p.R744Q and p.R814Q) showing significant losses except for p.E277K which retained full activity. However, the LDL internalization assay is only to able evaluate the impact of the variants on LDL internalization and not the exact functional defects such as failure to bind LDL. The data represented illustrate the hypomorphism nature of variants causing FH which may explain some of the variable expressivity of FH.ConclusionOur combinatorial approach of in silico, cellular, and functional analysis is a powerful strategy to determine pathogenicity and FH disease mechanisms which may provide opportunitites for novel therapeutic strategies.

This study examines the impact of analysts coverage on real earnings management (REM) decisions. The study further investigates the effect of mandatory IFRS adoption on the relationship between analyst coverage and REM. We constructed a sample of UK non-financial listed firms for the period 1997–2021. The results demonstrate that firms followed by a large number of financial analysts record higher levels of earnings management. This result supports the contention that high intensity of analyst coverage imposes extra pressure on firms' managers to meet analysts' earnings per share (EPS) expectations, motivating a higher level of earnings management. Contrary to expectations, the introduction of IFRS fails to strengthen the monitoring role of security analysts on firms' management: rather, managers utilize the inherent flexibility and available discretion in the principles-based IFRS to meet analysts’ benchmarks by means of REM activities. These results are robust after controlling endogeneity.

Abstract This paper introduces a novel approach for detecting the SARS-CoV-2 recombinant spike protein combining a label free electrochemical impedimetric immunosensor with the use of purified chicken IgY antibodies. The sensor employs three electrodes and is functionalized with an anti-S IgY antibody, ELISA and immunoblot assays confirmed the positive response of chicken immunized with SARS-CoV2 S antigen. The developed immunosensor is effective in detecting SARS-CoV-2 in nasopharyngeal clinical samples from suspected cases. The key advantage of this biosensor is its remarkable sensitivity, and its capability of detecting very low concentrations of the target analyte, with a detection limit of 5.65 pg/mL. This attribute makes it highly suitable for practical point-of-care (POC) applications, particularly in low analyte count clinical scenarios, without requiring amplification. Furthermore, the biosensor has a wide dynamic range of detection, spanning from 11.56 to 740 ng/mL, which makes it applicable for sample analysis in a typical clinical setting.

Abstract In this study, biochar (BC) and hydrochar (HC) composites were synthesized with natural kaolinite clay and their properties, stability, carbon (C) sequestration potential, polycyclic aromatic hydrocarbons (PAHs) toxicity, and impacts on maize germination and growth were explored. Conocarpus waste was pretreated with 0%, 10%, and 20% kaolinite and pyrolyzed to produce BCs (BC, BCK10, and BCK20, respectively), while hydrothermalized to produce HCs (HC, HCK10, and HCK20, respectively). The synthesized materials were characterized using X-ray diffraction, scanning electron microscope analyses, Fourier transform infrared, thermogravimetric analysis, surface area, proximate analyses, and chemical analysis to investigate the distinction in physiochemical and structural characteristics. The BCs showed higher C contents (85.73–92.50%) as compared to HCs (58.81–61.11%). The BCs demonstrated a higher thermal stability, aromaticity, and C sequestration potential than HCs. Kaolinite enriched-BCs showed the highest cation exchange capacity than pristine BC (34.97% higher in BCK10 and 38.04% higher in BCK20 than pristine BC), while surface area was the highest in kaolinite composited HCs (202.8% higher in HCK10 and 190.2% higher in HCK20 than pristine HC). The recalcitrance index (R50) speculated a higher recalcitrance for BC, BCK10, and BCK20 (R50 > 0.7), minimal degradability for HCK10 and HCK20 (0.5

Microbes have inhabited the earth for hundreds of millions of years longer than humans. The microbiota–gut–brain axis (MGBA) represents a bidirectional communication pathway. These communications occur between the central nervous system (CNS), the enteric nervous system (ENS), and the emotional and cognitive centres of the brain. The field of research on the gut–brain axis has grown significantly during the past two decades. Signalling occurs between the gut microbiota and the brain through the neural, endocrine, immune, and humoral pathways. A substantial body of evidence indicates that the MGBA plays a pivotal role in various neurological diseases. These include Alzheimer’s disease (AD), autism spectrum disorder (ASD), Rett syndrome, attention deficit hyperactivity disorder (ADHD), non-Alzheimer’s neurodegeneration and dementias, fronto-temporal lobe dementia (FTLD), Wilson–Konovalov disease (WD), multisystem atrophy (MSA), Huntington’s chorea (HC), Parkinson’s disease (PD), multiple sclerosis (MS), amyotrophic lateral sclerosis (ALS), temporal lobe epilepsy (TLE), depression, and schizophrenia (SCZ). Furthermore, the bidirectional correlation between therapeutics and the gut–brain axis will be discussed. Conversely, the mood of delivery, exercise, psychotropic agents, stress, and neurologic drugs can influence the MGBA. By understanding the MGBA, it may be possible to facilitate research into microbial-based interventions and therapeutic strategies for neurological diseases.

Microplastics (MPs) and heavy metals have recently attracted much attention due to their widespread distribution in the environment. Co-occurrence of MPs and heavy metals in dust poses potential health risks for humans. The objectives of this study were to investigate pollution and health risk factors associated with co-occurring MPs and heavy metals in urban dust. Here, 20 dust samples (both indoor and outdoor environments) were collected from different places in Riyadh, Saudi Arabia using sweeping method. The MPs were separated from dust samples via density separation using ZnCl2 Microscopic techniques were used to investigate MPs while inductively coupled plasma optical emission spectrometry was used heavy metals analyses in the collected samples. The results of the study showed that all the collected dust samples were contaminated with MPs of different shapes, sizes, and colors. Fragment-shaped MPs were the most dominant, followed by granules, fibers, and lines, while the majority of the MP particles were red and black. Furthermore, the size distribution analyses demonstrated that particles above 1,000 µm were abundant. Also, the number of MPs was in the range of 20 particles g-1 to 1,052 particles g-1. Human exposure estimations showed that toddlers could inhale more MPs (0.86 MPs particles kg-1 day-1 and 312.93 particles kg-1 year-1) than children, teenagers, and adults. In addition, the concentrations of heavy metals varied from one site to another, however, the average concentrations were lower than their corresponding values in the guidelines (except for Zn). The integrated potential ecological risk in dust samples was characterized as a low-risk criterion. The enrichment factor for Zn in dust samples at all sites was more than 2, indicating a major contamination concern and anthropogenic sources responsible for the existence of Zn. The estimated hazard quotient indicates that children and adults are saved from the adverse effects of dust inhalation in the studied area. These findings could serve as a preliminary step for efficient pollution management and environmental quality maintenance in Riyadh.

Colorectal cancer ranks third in cancer incidence in the United States, commonly metastasizing to the liver and lungs. Despite its high prevalence, colorectal cancer with intraocular metastasis is exceedingly rare, with only a few cases reported in the literature. This study presents a 58-year-old male, previously treated for rectal adenocarcinoma with liver and lung metastases, who developed choroidal metastasis causing visual impairment. Despite radiotherapy, moderate improvement was observed, and subsequent disease progression led to systemic chemotherapy. Intraocular metastasis, primarily affecting the choroid, is infrequent, often originating from breast and lung cancers. The presented case, originating from primary KRAS wild-type rectal cancer, adds to the limited gastrointestinal-tract-related occurrences. This report underscores the importance of recognizing intraocular metastasis in colorectal cancer, contributing valuable insights for improved understanding and potential guidance for future clinical decisions. Choroidal metastasis carries a poor prognosis, emphasizing the need for tailored management strategies.

Alzheimer’s disease (AD) is a severe neurodegenerative disorder and the most common form of dementia, causing the loss of cognitive function. Our previous study has shown, using a doubly mutated mouse model of AD (APP/PS1), that the neural adhesion molecule L1 directly binds amyloid peptides and decreases plaque load and gliosis when injected as an adeno-associated virus construct (AAV-L1) into APP/PS1 mice. In this study, we microinjected AAV-L1, using a Hamilton syringe, directly into the 3-month-old APP/PS1 mouse hippocampus and waited for a year until significant neurodegeneration developed. We stereologically counted the principal neurons and parvalbumin-positive interneurons in the hippocampus, estimated the density of inhibitory synapses around principal cells, and compared the AAV-L1 injection models with control injections of green fluorescent protein (AAV-GFP) and the wild-type hippocampus. Our results show that there is a significant loss of granule cells in the dentate gyrus of the APP/PS1 mice, which was improved by AAV-L1 injection, compared with the AAV-GFP controls (p < 0.05). There is also a generalized loss of parvalbumin-positive interneurons in the hippocampus of APP/PS1 mice, which is ameliorated by AAV-L1 injection, compared with the AAV-GFP controls (p < 0.05). Additionally, AAV-L1 injection promotes the survival of inhibitory synapses around the principal cells compared with AAV-GFP controls in all three hippocampal subfields (p < 0.01). Our results indicate that L1 promotes neuronal survival and protects the synapses in an AD mouse model, which could have therapeutic implications.

Abstract Animal and human feces typically include intestinal sulfate-reducing bacteria (SRB). Hydrogen sulfide and acetate are the end products of their dissimilatory sulfate reduction and may create a synergistic effect. Here, we report NADH and NADPH peroxidase activities from intestinal SRB Desulfomicrobium orale and Desulfovibrio piger. We sought to compare enzymatic activities under the influence of various temperature and pH regimes, as well as to carry out kinetic analyses of enzymatic reaction rates, maximum amounts of the reaction product, reaction times, maximum rates of the enzyme reactions, and Michaelis constants in cell-free extracts of intestinal SRB, D. piger Vib-7, and D. orale Rod-9, collected from exponential and stationary growth phases. The optimal temperature (35 °C) and pH (7.0) for both enzyme’s activity were determined. The difference in trends of Michaelis constants (K m) during exponential and stationary phases are noticeable between D. piger Vib-7 and D. orale Rod-9; D. orale Rod-9 showed much higher K m (the exception is NADH peroxidase of D. piger Vib-7: 1.42 ± 0.11 mM) during the both monitored phases. Studies of the NADH and NADPH peroxidases—as putative antioxidant defense systems of intestinal SRB and detailed data on the kinetic properties of this enzyme, as expressed by the decomposition of hydrogen peroxide—could be important for clarifying evolutionary mechanisms of antioxidant defense systems, their etiological role in the process of dissimilatory sulfate reduction, and their possible role in the development of bowel diseases.

There is a consensus among experts and consumers that pulses are a good source of nutrients and fiber. In a traditional hummus recipe, chickpeas are the major ingredient. The present study is aimed at developing new legume dips by exchanging chickpeas (Chd) with dry green (Gld) and red lentils (Rld), dry white beans (Wbd), and dry green peas (Gpd). Presoaking, boiling, proximate composition, pH, energy, color measurement, and sensory evaluation were conducted on the dips using chickpea dip (hummus) as a control. One-way ANOVA was used to determine the differences between the dips. The results revealed significant differences in the proximate composition of legume dips. The protein content of the five samples ranged between 7.46% and 9.19%, while the values varied from 8.59% to 10.93% in fat, 3.88% to 6.54% in crude fiber, 14.48% to 15.51% in carbohydrates, 171.95 to 195.13 in energy, 1.55% to 1.76% in ash, and 63.35% to 66.90% in moisture. These variations could be attributed to the type and composition of each legume, the soaking and boiling process, and the tahini added during the preparation. pH ranged between 4.5 and 4.7. The color measurement indicated that the five legume dips could be considered bright products (high L∗>67), with a positive color valuebluered-green and yellow-. Significant differences (p≤0.05) were observed in the legume dips sensory evaluation, and the red lentil dip was the most acceptable with results comparable to the chickpea dip; it was followed by the green lentil, white bean, and green pea dips. These results highlight the feasibility of commercial production of legume dip that promotes human health and gives consumers more choices.

BackgroundEarly identification of a patient with infection who may develop sepsis is of utmost importance. Unfortunately, this remains elusive because no single clinical measure or test can reflect complex pathophysiological changes in patients with sepsis. However, multiple clinical and laboratory parameters indicate impending sepsis and organ dysfunction. Screening tools using these parameters can help identify the condition, such as SIRS, quick SOFA (qSOFA), National Early Warning Score (NEWS), or Modified Early Warning Score (MEWS). We aim to externally validate qSOFA, SIRS, and NEWS/NEWS2/MEWS for in-hospital mortality among adult patients with suspected infection who presenting to the emergency department.Methods and analysisPASSEM study is an international prospective external validation cohort study. For 9 months, each participating center will recruit consecutive adult patients who visited the emergency departments with suspected infection and are planned for hospitalization. We will collect patients' demographics, vital signs measured in the triage, initial white blood cell count, and variables required to calculate Charlson Comorbidities Index; and follow patients for 90 days since their inclusion in the study. The primary outcome will be 30-days in-hospital mortality. The secondary outcome will be intensive care unit (ICU) admission, prolonged stay in the ICU (i.e., ≥72 hours), and 30- as well as 90-days all-cause mortality. The study started in December 2021 and planned to enroll 2851 patients to reach 200 in-hospital death. The sample size is adaptive and will be adjusted based on prespecified consecutive interim analyses.DiscussionPASSEM study will be the first international multicenter prospective cohort study that designated to externally validate qSOFA score, SIRS criteria, and EWSs for in-hospital mortality among adult patients with suspected infection presenting to the ED in the Middle East region.Study registrationThe study is registered at ClinicalTrials.gov (NCT05172479).

Introduction: The World Health Organization (WHO)'s Research and Development (R&D) Blueprint for Action to Prevent Epidemics, a plan of action, highlighted several infectious diseases as crucial targets for prevention. These infections were selected based on a thorough assessment of factors such as transmissibility, infectivity, severity, and evolutionary potential. In line with this blueprint, the VACCELERATE Site Network approached infectious disease experts to rank the diseases listed in the WHO R&D Blueprint according to their perceived risk of triggering a pandemic. VACCELERATE is an EU-funded collaborative European network of clinical trial sites, established to respond to emerging pandemics and enhance vaccine development capabilities. Methods: Between February and June 2023, a survey was conducted using an online form to collect data from members of the VACCELERATE Site Network and infectious disease experts worldwide. Participants were asked to rank various pathogens based on their perceived risk of causing a pandemic, including those listed in the WHO R&D Blueprint and additional pathogens. Results: A total of 187 responses were obtained from infectious disease experts representing 57 countries, with Germany, Spain, and Italy providing the highest number of replies. Influenza viruses received the highest rankings among the pathogens, with 79 % of participants including them in their top rankings. Disease X, SARS-CoV-2, SARS-CoV, and Ebola virus were also ranked highly. Hantavirus, Lassa virus, Nipah virus, and henipavirus were among the bottom-ranked pathogens in terms of pandemic potential. Conclusion: Influenza, SARS-CoV, SARS-CoV-2, and Ebola virus were found to be the most concerning pathogens with pandemic potential, characterised by transmissibility through respiratory droplets and a reported history of epidemic or pandemic outbreaks.

Electrocoagulation is a water treatment technology capable to remove a variety of organic pollutants from water. It is advantageous compared to chemical coagulation due to the controlled dissolution of coagulants by regulating the current density and pH. In this work, the removal of kinetic hydrate inhibitor (KHI) (polyvinyl pyrrolidone, PVP) from water by electrocoagulation using Al electrodes was investigated. The effects of several experimental conditions including the nature of the supporting electrolyte, the current density, and the initial pH value on the electrochemical dissolution of aluminum was evaluated. The findings of the experiments revealed that both chemical and electrochemical dissolution play important roles in the generation of hydroxo-aluminum species. Corrosion studies demonstrated that the presence of chloride ions in water promotes aluminum dissolving via pitting corrosion, whereas the presence of phosphate ions inhibits aluminum corrosion by the deposition of a thick passive layer of aluminum hydroxide/phosphate on the metal surface. The theoretical and experimental amounts of aluminum, increase linearly with increasing specific electrical charge for Q< 2.5 Ah/L, which correlates well with Faraday's Law. The removal of KHI from 0.1M NaCl aqueous solutions by electrocoagulation using aluminum electrodes achieved high removal efficiency in terms of total organic carbon (TOC) up to 95%. TOC decay during galvanostatic electrolysis confirmed the removal of KHI molecules by Al-electrocoagulation at different current densities and pH conditions. The primary mechanism involved in eliminating KHI from water by electrocoagulation using Al electrodes includes mainly the adsorption of PVP molecules on the surface of Al(OH)3 flocs and their enmeshment inside the solid coagulants.

Proper growth and branching of dendrites are crucial for adequate central nervous system (CNS) functioning. The neuronal dendritic geometry determines the mode and quality of information processing. Any defects in dendrite development will disrupt neuronal circuit formation, affecting brain function. Besides cell-intrinsic programmes, extrinsic factors regulate various aspects of dendritic development. Among these extrinsic factors are extracellular molecular signals which can shape the dendrite architecture during early development. This review will focus on extrinsic factors regulating dendritic growth during early neuronal development, including neurotransmitters, neurotrophins, extracellular matrix proteins, contact-mediated ligands, and secreted and diffusible cues. How these extracellular molecular signals contribute to dendritic growth has been investigated in developing nervous systems using different species, different areas within the CNS, and different neuronal types. The response of the dendritic tree to these extracellular molecular signals can result in growth-promoting or growth-limiting effects, and it depends on the receptor subtype, receptor quantity, receptor efficiency, the animal model used, the developmental time windows, and finally, the targeted signal cascade. This article reviews our current understanding of the role of various extracellular signals in the establishment of the architecture of the dendrites.

AbstractThe current study investigates the role of eXtensible Business Reporting Language (XBRL) on the transparency and efficiency of information disclosure in Jordanian financial companies. Based on a sample of 124 respondents, including accountants, academics, and auditors with a background in XBRL. We find that there is a significant positive impact of adopting XBRL on improving information transparency and efficiency of Jordanian financial companies. XBRL reporting leads to better, more relevant, reliable, and transparent financial information, simplifying preparing group financial statements. XBRL is more critical for sustainability reporting than financial reporting because sustainability reporting is primarily optional. XBRL holds more potential for promoting corporate social and environmental sustainability performance reporting. The study heightened the importance of using the XBRL framework in preparing their financial reports to increase the level of confidence by external parties in the management system of these companies. While this research contributes to the existing knowledge base, it also underlines the need for further exploration into this field. The implications for regulators and financial companies are clear, and addressing the identified limitations can refine future research efforts. XBRL continues to be a vital tool in financial reporting, offering opportunities for growth, transparency, and efficiency in Jordan and beyond.

Background and Objectives: Dasatinib is one of the tyrosine kinase inhibitors. The main use of these agents is inhibition of cancerous cell proliferation. The therapeutic importance of tyrosine kinase inhibitors raises the necessity of many types of investigations, especially the pharmacokinetic analysis of these drugs in humans. This analysis, along with other investigations and clinical research, will contribute to the overall knowledge of the drug. This study focused on the population pharmacokinetics of dasatinib. The objective of the study was to investigate the sources of the variability of dasatinib in a population pharmacokinetics study in healthy participants. Methods: We utilized 4180 plasma observations from 110 subjects who were administered SPRYCEL® on two separate occasions under fasting conditions; data from 20% of the subjects (22 subjects) were extracted for the purpose of internal model evaluation and data from 88 subjects were used in modeling. The model was evaluated by visual predictive check of three different datasets. A two-compartmental model with first order absorption and transit compartment was considered the simplest base model to describe the data based on the corrected Bayesian information criterion evaluation. Covariates were tested through conditional sampling for the stepwise approach-screening procedure in Monolix 2020R1 version. Conditional sampling for the stepwise approach was used to include the correlated covariates within the base model in the forward inclusion step and then to eliminate them backwardly to ensure that the key covariates were kept in the model at the final stage. Results: The effect of body mass index on the absorption rate constant was considered as significant covariate in the final established model. Visual predictive check for simulations, 20% of the original dataset (internal dataset) and an external dataset demonstrated the appropriateness of the final model. Conclusions: Population pharmacokinetic modeling was performed to describe dasatinib pharmacokinetics in healthy subjects. Body mass index was considered as a factor that might be used in the future along with studies on patients to adjust the dosing regimens. Key Points: Dasatinib is classified as a highly variable drug; this variability was demonstrated in the study by the effect of body mass index on the absorption rate constant.

During the first and second stages of postnatal development, neocortical neurons exhibit a wide range of spontaneous synchronous activity (SSA). Towards the end of the second postnatal week, the SSA is replaced by a more sparse and desynchronized firing pattern. The developmental desynchronization of neocortical spontaneous neuronal activity is thought to be intrinsically generated, since sensory deprivation from the periphery does not affect the time course of this transition. The extracellular protein reelin controls various aspects of neuronal development through multimodular signaling. However, so far it is unclear whether reelin contributes to the developmental desynchronization transition of neocortical neurons. The present study aims to investigate the role of reelin in postnatal cortical developmental desynchronization using a conditional reelin knockout (RelncKO) mouse model. Conditional reelin deficiency was induced during early postnatal development, and Ca2+ recordings were conducted from organotypic cultures (OTCs) of the somatosensory cortex. Our results show that both wild type (wt) and RelncKO exhibited an SSA pattern during the early postnatal week. However, at the end of the second postnatal week, wt OTCs underwent a transition to a desynchronized network activity pattern, while RelncKO activity remained synchronous. This changing activity pattern suggests that reelin is involved in regulating the developmental desynchronization of cortical neuronal network activity. Moreover, the developmental desynchronization impairment observed in RelncKO was rescued when RelncKO OTCs were co-cultured with wt OTCs. Finally, we show that the developmental transition to a desynchronized state at the end of the second postnatal week is not dependent on glutamatergic signaling. Instead, the transition is dependent on GABAAR and GABABR signaling. The results suggest that reelin controls developmental desynchronization through GABAAR and GABABR signaling.

Neuronal plasticity is a crucial mechanism for an adapting nervous system to change. It is shown to be regulated by perineuronal nets (PNNs), the condensed forms of the extracellular matrix (ECM) around neuronal bodies. By assessing the changes in the number, intensity, and structure of PNNs, the ultrastructure of the PNN mesh, and the expression of inhibitory and excitatory synaptic inputs on these neurons, we aimed to clarify the role of an ECM glycoprotein, tenascin-C (TnC), in the dorsal hippocampus. To enhance neuronal plasticity, TnC-deficient (TnC-/-) and wild-type (TnC+/+) young adult male mice were reared in an enriched environment (EE) for 8 weeks. Deletion of TnC in TnC-/- mice showed an ultrastructural reduction of the PNN mesh and an increased inhibitory input in the dentate gyrus (DG), and an increase in the number of PNNs with a rise in the inhibitory input in the CA2 region. EE induced an increased inhibitory input in the CA2, CA3, and DG regions; in DG, the change was also followed by an increased intensity of PNNs. No changes in PNNs or synaptic expression were found in the CA1 region. We conclude that the DG and CA2 regions emerged as focal points of alterations in PNNs and synaptogenesis with EE as mediated by TnC.

Background: The role of viruses is well known in health and disease. The aim of this report was to describe the profile of viruses in the gut of healthy Saudi children. Methods: In 20 randomly selected school age children from Riyadh, stool samples were collected in cryovials and stored at −80° C. At the time of analysis, the samples were sent by express mail in a temperature-controlled container to the laboratory in the USA, Viral DNA was isolated and shotgun metagenomic sequencing was performed. The abundance of each organism was expressed as an average relative percentage across the viral phylogenetic tree from phyla to species. Results: The median age of the children was 11.3 (range 6.8–15.4) years, and 35% were males. Caudovirales were the most abundant bacteriophage order (77%) and Siphoviridae, Myoviridae, and Podoviridae families predominated, accounting for 41%, 25%, and 11%, respectively. Among the viral bacteriophage species, the most abundant were the Enterobacteria phages. Conclusion: The profile and abundance of the gut virome in healthy Saudi children reveal important differences from the literature. Further studies from different populations with larger sample sizes are needed to understand the role of gut viruses in the pathogenesis of disease in general and in the response to fecal microbiota therapy in particular.

The field of wearable devices and exoskeletons for rehabilitation and assistance is one of the main fields where variable stiffness actuators (VSAs) are continuously incorporated. This is due to the need for such devices to adapt to erratic environments and mimic human motions. Recently, a passive revolute joint design with controllable variable stiffness was proposed by the authors. However, the previous design was only introduced as a proof of concept, with no further investigation of the design stiffness change capabilities for application utilization. In this work, we introduce an extended analysis and comprehensive parametric study of the system’s main design parameters. Based on the performed analysis, we propose an optimization framework for this design concept that allows implementation in knee exoskeletons. The main design parameters that affect the stiffness performance are defined. The proposed method allows the identification of these design parameters, which enables the redesign of the system according to the predefined user requirements, such as size, desired stiffness range, and stiffness change rate. A bench-top experimental setup is constructed to validate the obtained optimal design parameters. Results show the ability to achieve the desired stiffness performance for the intended application.

Feedstock type and pyrolysis temperature primarily affect the properties of resultant biochar. Therefore, the effects of several different feedstock types and various pyrolysis temperatures on structural, chemical, proximate, morphological, and elemental compositional characteristics of the resultant biochars were explored. Nine types of wastes (date palm fiber waste (DF), date palm leaf waste (DL), date palm petiole waste (DP), tomato plant waste (TM), cucumber plant waste (CC), poultry litter (PL), chicken feather waste (CH), cow dung (CD), and conocarpus waste (CN) were collected and pyrolyzed at varying temperatures (300, 400, 500, and 600 °C) to produce different types of biochar, which were subjected to physio-chemical, proximate, and ultimate analyses. Distinctive variations were observed in the characteristics of the used feedstock types and their derived biochars. The biochars derived from CC exhibited the highest pH (8.41–11.02), while the biochars derived from CH demonstrated the minimum pH (7.99–8.40). Overall, the biochars derived from PL, CC, TM, and DL showed higher contents of C as compared to the other biochars, suggesting higher stability. Contrarily, the biochars derived from CH and CD exhibited a higher labile C fraction, indicating its lower recalcitrance than other tested biochars. The biochars produced at low pyrolysis temperatures showed a comparatively amorphous surface with lower alkalinity and electrical conductivity, while higher moisture, net negative charge, labile carbon, and volatile contents. Contrarily, the higher pyrolysis temperature demonstrated the higher ash and fixed carbon contents with more surface porosity and comparatively higher non-labile carbon fraction. Biochar produced at 600 °C exhibited H/C and O/C atomic ratios of

Abstract Neuro-ocular changes during long-duration space flight are known as spaceflight-associated neuro-ocular syndrome (SANS). The ability to detect, monitor, and prevent SANS is a priority of current space medicine research efforts. Optic nerve sheath diameter (ONSD) measurement has been used both terrestrially and in microgravity as a proxy for measurements of elevated intracranial pressure. ONSD shows promise as a potential method of identifying and quantitating neuro-ocular changes during space flight. This review examines 13 studies measuring ONSD and its relationship to microgravity exposure or ground-based analogs, including head-down tilt, dry immersion, or animal models. The goal of this correspondence is to describe heterogeneity in the use of ONSD in the current SANS literature and make recommendations to reduce heterogeneity in future studies through standardization of imaging modalities, measurement techniques, and other aspects of study design.

Introduction The reduction of fluoroscopic exposure during catheter ablation of supraventricular arrhythmias is widely adopted by experienced electrophysiology physicians with a relatively short learning curve and is becoming standard of care in many parts of the world. While observational studies in the USA and some parts of Western Europe have evaluated the minimal fluoroscopic approach, there are scarce real-world data for this technique and generalisability of outcome in other economic regions.Methods and analysis The arrhythmias with as low as reasonably achievable X-ray exposure study is a prospective, observational, multicentre and multinational open-label registry study. Up to 700 patients undergoing catheter ablation for right-sided supraventricular arrhythmias (according to national guidelines) will be enrolled for the routine use of the EnSite Precision 3D mapping system. Participating sites are distributed in 13 countries from Central Eastern Europe, North and South Africa, the Middle East and the CIS (Commonwealth of Independent States), with different levels of expertise using minimal fluoroscopic exposure techniques. After electrophysiological procedure, patients will be followed up for 6 months either in-clinic or via telephone interview. Patients will be asked to complete a study questionnaire at enrolment and 6 months after the invasive procedure to assess quality of life changes secondary to the procedure. The study’s primary objective is to describe ionising radiation exposure during catheter ablation when the EnSite Precision 3D mapping system is used in supraventricular tachycardia ablation. The study’s secondary objective is to assess the safety and efficacy of this method. Furthermore, fluoroscopy timing, total procedure time, success rate and complications will be reported.Ethics and dissemination The study was approved by the ethics committee at Mohammed Bin Khalifa Specialist Cardiac Centre (BDF/R&REC/2020-504) and the medical ethics committees of all participating sites. Participants will be required to provide informed consent before enrolment in the study. The study results will be published and presented at conferences.Trial registration number NCT04716270

IntroductionThere is an increasing evidence supporting the hypothesis that traumatic experiences during early developmental periods might be associated with psychopathology later in life. Maternal deprivation (MD) in rodents has been proposed as an animal model for certain aspects of neuropsychiatric disorders.MethodsTo determine whether early-life stress leads to changes in GABAergic, inhibitory interneurons in the limbic system structures, specifically the amygdala and nucleus accumbens, 9-day-old Wistar rats were exposed to a 24 h MD. On postnatal day 60 (P60), the rats were sacrificed for morphometric analysis and their brains were compared to the control group.ResultsResults show that MD affect GABAergic interneurons, leading to the decrease in density and size of the calcium-binding proteins parvalbumin-, calbindin-, and calretinin-expressing interneurons in the amygdala and nucleus accumbens.DiscussionThis study indicates that early stress in life leads to changes in the number and morphology of the GABAergic, inhibitory interneurons in the amygdala and nucleus accumbens, most probably due to the loss of neurons during postnatal development and it further contributes to understanding the effects of maternal deprivation on brain development.

Background: The diversity in characteristics of cannabis products and behavior patterns make evaluation of cannabis exposure in population-based, self-report surveys challenging. Accurate identification of cannabis exposure and related outcomes necessitates a thorough understanding of participants’ interpretations of survey questions assessing cannabis consumption behaviors. Objectives: The current study utilized cognitive interviewing to gain insight on participants’ interpretation of items in a self-reported survey instrument used to estimate the quantity of THC consumed in population samples. Methods: Cognitive interviewing was used to evaluate survey items assessing cannabis use frequency, routes of administration, quantity, potency, and perceived “typical patterns” of use. Ten participants ≥18 years (n = 4 cisgender-men; n = 3 cisgender-women; n = 3 non-binary/transgender) who had used cannabis plant material or concentrates in the past week were recruited to take a self-administered questionnaire and subsequently answer a series of scripted probes regarding survey items. Results: While most items presented no issues with comprehension, participants identified several areas of ambiguity in question or response item wording or in visual cues included in the survey. Generally, participants with irregular use patterns (i.e., non-daily use) reported more difficulty recalling the time or quantity of cannabis use. Findings resulted in several changes to the updated survey, including updated reference images and new quantity/frequency of use items specific to the route of administration. Conclusion: Incorporating cognitive interviewing into cannabis measurement development among a sample of knowledgeable cannabis consumers led to improvements in assessing cannabis exposure in population surveys, which may otherwise have been missed.

Abstract A bionanocomposite based on biosynthesized poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and reinforced with silver@zinc oxide (Ag–ZnO) was synthesized in variable loadings of Ag–ZnO using the in-situ casting dissolution technique. The degradable biopolymer PHBV had been biosynthesized from date waste as a renewable carbon source. The fabricated products were investigated as promising antibacterial materials. The Ag–ZnO nanoparticles were also synthesized using the green method in the presence of Gum Arabic. The Ag–ZnO nanoparticles were loaded within the PHBV biopolymer backbone at concentration of 1%, 3%, 5% and 10%, PHBV/Ag–ZnO(1,3,5,10%). The chemical structure, morphology, physical and thermal properties of the PHBV/Ag–ZnO bionanocomposites were assessed via common characterization tools of FTIR, TGA, XRD, SEM and EDX. One step of the degradation process was observed in the range of 200–220 °C for all the obtained materials. The onset degradation temperature of the bionanocomposites have been noticeably increased with increasing the nanofiller loading percentage. In addition, fabricated products were investigated for their interesting antibacterial performance. A detailed biological screening for the obtained products was confirmed against some selected Gram-positive and Gram-negative strains S. aureus and E. coli, respectively. Overall, the bionanocomposite PHBV/Ag–ZnO(10%) was the most potent against both types of the selected bacteria. The order of bacterial growth inhibition on the surface of the fabricated bionanocomposites was detected as follows: PHBV/Ag–ZnO(10%) > PHBV/Ag–ZnO(5%) > PHBV/Ag–ZnO(3%) > PHBV/Ag–ZnO(1%).

Abstract Saturation is an intriguing phenomenon that has captured the attention of scientists since the time of Froude when he reported it for ship motion in the mid of the nineteenth century. This work presents the demonstration and a comprehensive study of the nonlinear saturation phenomenon on a compound micromachined structure of U-shape (micro portal frame). The frame is designed and fabricated as a multi-input and multi-output device for actuating the 1st (sway) and 2nd (symmetric) in-plane vibration modes. Geometric nonlinearities along with the softening effect of the electrostatic force present the necessary conditions for the activation of a 2:1 internal (auto-parametric) resonance between the 1st and 2nd modes. Experimental data complemented with analytical simulations are obtained showing the internal resonance and the saturation phenomenon. These results are promising for further exploration of such compound structures and for further in-depth studies of the saturation phenomenon on a variety of other systems and applications.

In this work, Myrrh gum was used with sodium alginate (SA) to create novel Myrrh-Alginate beads composite. These beads were produced utilizing the ionotropic gelation technique. Methylene blue (MB) was employed as a drug model to evaluate the kinetics of drug release and the capacity of the synthesized beads to function as a drug delivery system. The molecular interaction between sodium alginate and myrrh was confirmed by FTIR spectroscopy. The physical characteristics of the Myrrh-Alginate beads, including drug content, particle size, thermal properties, equilibrium water content (EWC), swelling behavior, and equilibrium swelling ratio (ESR), were studied to establish the hydrogel's response type, as well as the releasing kinetics at 37°C and in Phosphate buffer solution (PBS) at pH = 6.8 and 10. All beads (loaded and unloaded) were analyzed by Differential scanning calorimetry, Scanning electron microscopy (SEM) and X-ray diffraction analysis (XRD). The drug content percentages of the Myrrh-Alginate beads increased with a moderate fraction (5% ) of Myrrh but dropped with a higher Myrrh percentage. The Myrrh-Alginate beads absorbed more water and swelled more than the pure calcium alginate beads (S2) in pH 6.8 and 10 of (PBS). In a pH 6.8 of (PBS), the Myrrh-Alginate beads demonstrated a controlled and regulated style of releasing and demonstrated a high match with the Korsmeyer-Peppas model as they had the maximum values of the correlation factor (R2) in this model.

Introduction: Introduction: Several studies have demonstrated that orexins may regulate different forms of affective and cognitive processes during wakefulness. The Orbitofrontal Cortex (OFC) and Anterior Cingulate Cortex (ACC), as an essential part of the Prefrontal Cortex (PFC), have a crucial role in cognitive processes such as reward and decision-making. They also have a high amount of orexin receptor type 1 (OX1Rs). Methods: In the present study, we inhibited OX1Rs in this area after a 10-min baseline recording to find out the role of OX1Rs in the OFC neuron’s firing rate. Next, we inhibited the lateral hypothalamus (LH) as the primary source of orexinergic neurons. Afterward, using a single-unit recording technique in rats, we detected the effects of the lateral hypothalamus on the firing rate and activity pattern of the ACC or OFC neurons. Results: Data showed that the blockade of OX1Rs in the OFC could excite 8 and inhibit 1 neuron(s) out of 11. In addition, the blockade of OX1Rs in the ACC could excite 6 and inhibit 3 neurons out of 10. LH inactivation excited 5 out of 12 neurons and inhibited 6 in the ACC. It also excited 8 and inhibited 6 neurons out of 14 in the OFC. These data suggest that the blockade of OX1Rs excites 72% of the neurons, but LH inactivation had a stimulating effect on only 50% of neurons in two main subregions of the PFC. Conclusion: Accordingly, PFC neurons may receive the orexinergic inputs from the LH and indirectly from other sources.

Abstract Sources and levels of heavy metals (HMs) in soil and dust of urban and suburban areas in Riyadh (industrial city) and Mahad AD’Dahab (mining area) cities in Saudi Arabia were reported in this study. Additionally, the concentrations of HMs in different soil particle size fractions (> 250, 63–250 and 2). The hazard index values of dust and soil ( 1, suggesting non-carcinogenic risk. Therefore, the dust and soil samples from the mined area of Mahad AD’Dahab had a higher pollution levels, as well as ecological and human health risks than those from Riyadh. Hence, the pollution of such residential environments with HMs (especially Cd, Cu, Zn, and Pb) needs to be monitored.

Abstract This work reports highly selective multiple analyte detection by exploiting two different mechanisms; absorption and thermal conductivity using a single MEMS device. To illustrate the concept, we utilize a resonator composed of a clamped-guided arch beam connected to a flexural beam and a T-shaped moveable mass. A finite element model is used to study the mode shapes and mechanical behavior of the device with good agreement reported with the experimental data. The resonator displays two distinct out-of-plane modes of vibration. For humidity detection, we utilize physisorption by functionalizing the surface with graphene oxide (GO), which has strong affinity toward water vapors. The GO solution is prepared and drop-casted over the mass surface using an inkjet printer. On the other hand, cooling the heated flexural beams is used for helium (He) detection (thermal-conductivity-based sensor). The sensor characteristics are extensively studied when the modes are individually and simultaneously actuated. Results affirm the successful utilization of each mode for selective detection of relative humidity and He. This novel mode-dependent selective detection of multiple analytes can be a promising building block for the development of miniature, low-powered, and selective smart sensors for modern portable electronic devices.

Textile dyes widely used in industrial products are known as a major threat to human health and water ecological security. On the other hand, sol gel represents a principal driver of the adoption of dispersive solid-phase microextractors (d-µ SPME) for pollutants residues in water. Thus, the current study reports a new and highly rapid and highly efficient hybrid sol-gel-based sponge polyurethane foam as a dispersive solid-phase microextractor (d-µ-SPME) platform packed mini-column for complete preconcentration and subsequent spectrophotometric detection of eosin Y textile dye in wastewater. The unique porous structure of the prepared sol-gel immobilized polyurethane foams (sol-gel/PUF) has suggested its use for the complete removal of eosin Y dye (EY) from water. In the mini-column, the number (N) of plates, the height equivalent to the theoretical plates (HETP), the critical capacity (CC), and the breakthrough capacities (BC) of the hybrid sol-gel-treated polyurethane foams towards EY dye were determined via the breakthrough capacity curve at various flow rates. Under the optimum condition using the matrix match strategy, the linear range of 0.01–5 µg L−1, LODs and LOQs in the range of 0.006 µg L−1, and 0.01 µg L−1 for wastewater were achieved. The intra-day and inter-day precisions were evaluated at two different concentration levels (0.05 and 5 μg L−1 of dye) on the same day and five distinct days, respectively. The analytical utility of the absorbents packed in pulses and mini-columns to extract and recover EY dye was attained by 98.94%. The column could efficiently remove different dyes from real industrial effluents, and hence the sol-gel/PUF is a good competitor for commercial applications. The findings of this research work have strong potential in the future to be used in selecting the most suitable lightweight growing medium for a green roof based on stakeholder requirements. Therefore, this study has provided a convenient pathway for the preparation of compressible and reusable sponge materials from renewable biomass for efficient removal of EY from the water environment.

Microplastics (MPs) are emerging environmental pollutants worldwide, posing potential health risks. Moreover, MPs may act as vectors for other contaminants and affect their fate, transport, and deposition in the environment. Therefore, efficient and economical techniques are needed for the removal of contemporary MPs and contaminants from the environment. The present research study investigated the sorption of phosphorus (P) and ammonium (NH4+) onto date palm waste-derived biochar (BC) from an aqueous solution in the presence of polyamide (PA) and polyethylene (PE) MPs. The BC was prepared at 600 °C, characterized for physio-chemical properties, and applied for P and NH4+ removal via isotherm and kinetic sorption trials. The results of the sorption trials demonstrated the highest removal of NH4+ and P was obtained at neutral pH 7. The highest P sorption (93.23 mg g−1) by BC was recorded in the presence of PA, while the highest NH4+ sorption (103.76 mg g−1) was found with co-occurring PE in an aqueous solution. Sorption isotherm and kinetics models revealed that P and NH4+ removal by MP-amended BC followed chemisorption, electrostatic interaction, precipitation, diffusion, and ion exchange mechanisms. Overall, co-existing PA enhanced the removal of P and NH4+ by 66% and 7.7%, respectively, while co-existing PE increased the removal of P and NH4+ by 55% and 30%, respectively, through the tested BC. Our findings suggested that converting date palm waste into BC could be used as a competent and economical approach to removing P and NH4+ from contaminated water. Furthermore, microplastics such as PE and PA could assist in the removal of P and NH4+ from contaminated water using BC.

This research investigates the possibility of modifying the X8 Skywalker from a fixed-wing unoccupied aerial vehicle into a convertiplane to utilize the advantages of vertical take-off and landing and maintain the benefits of fixed-wing design. In this study two configurations were tested; the first one includes sharp holes embedded in the wings for the propellers and the second one has filleted holes. The purpose of the study is to analyze the new configurations’ ability to generate enough lift after reducing the wings area. The aerodynamic coefficients are calculated through computational fluid dynamics. Simulation results were validated experimentally by using the wind tunnel. Even though the holes reduced the wing area by about 20%, the proposed modifications could lead to a lift to drag ratio around 7. The results showed that the new configurations can generate five times the lift compared to the drag, while the maximum lift to drag ratio dropped by 50% compared to the original design. At the same time, the filleted hole configuration showed less drag and turbulence effects, especially at a low angle of attack, compared to the sharp hole configuration.

Regulations often are imposing long postmortem times before autopsy leading to certain toxicity-unrelated changes in biomarkers, which in turn may affect the reliability of toxicity evaluation during forensic investigations. Since methomyl pesticide shows significant toxicity and is frequently encountered in poisoning cases, the current study evaluated different parameters in methomyl intoxicated rats at three different postmortem intervals (Hour 0, Hour 3 and Hour 6). Eighteen adult Sprague Dawley rats were poisoned with methomyl to simulate actual methomyl poisoning cases. The time of death was assigned as Hour 0. The animals were divided into 3 groups (n = 6) to collect blood and tissue samples at the selected time points. Body weight, relative organ weight, protein concentration, methomyl concentration and acetylcholinesterase activity (AChE) were assessed in blood and different tissues (liver, spleen, kidney, brain, eye, and bone marrow) to evaluate the effect of postmortem sampling time. Outcomes revealed significant decreases in methomyl concentration in blood and bone marrow with advanced sampling time (P

Drop foot is a pathological type of gait frequently exhibited by individuals suffering from stroke and other neurological conditions due to the weakness of the ankle dorsiflexor muscles. To avoid common negative compensations, such as foot-slap during the loading response and toe-drag during the swing phase of gait, various drop foot assistive robotic devices and technologies have emerged over the last couple of decades. This review summarizes the design, working principle, and application of robotic devices for drop foot assistance and rehabilitation in the last decade. The research findings describe the design aspects of 72 lower-limb robotic assistance devices for drop foot, including 21 studies that evaluated specific design aspects through experimental trials. All the designs reviewed here demonstrated the capability to successfully improve drop foot impairments in the sagittal plane. Some leveraged advanced functional features to achieve optimal performance without jeopardizing the user’s natural range of motion, comfort, balance, or safety. However, there remain certain limitations when combining all these functional features into one robotic device. Overcoming these limitations should add great value to the future of advanced robotic devices for drop foot assistance and rehabilitation.

The purpose of this study is the synthesis of α-MnO2-based cathode materials for rechargeable aqueous zinc ion batteries by hydrothermal method using KMnO4 and MnSO4 as starting materials. The aim is to improve the understanding of Zn2+ insertion/de-insertion mechanisms. The as-prepared solid compounds were characterized by spectroscopy and microscopy techniques. X-ray diffraction showed that the hydrothermal reaction forms α-MnO2 and Ce4+-inserted MnO2 structures. Raman spectroscopy confirmed the formation of α-MnO2 with hexagonal MnO2 and Ce-MnO2 structures. Scanning electron microscopy (SEM) confirmed the formation of nanostructured MnO2 (nanofibers) and Ce-MnO2 (nanorods). The electrochemical performance of MnO2 was evaluated using cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) tests in half-cells. CV results showed the reversible insertion/de-insertion of Zn2+ ions in MnO2 and Ce-MnO2. GCD cycling tests of MnO2 and Ce-MnO2 at 2500 mA/g demonstrated an impressive electrochemical performance, excellent cycling stability throughout 500 cycles, and high rate capability. The excellent electrochemical performance and the good cycling stability of MnO2 and Ce-MnO2 nanostructures by simple method makes them promising cathode materials for aqueous rechargeable zinc-ion batteries.