Search

Cement asbestos slates, commonly known as Eternit® and still abundant in private and public buildings, were deactivated through a thermal process. The resulting deactivated cement asbestos powder (DCAP), a mixture of Ca-Mg-Al silicates and glass, was compounded with Pavatekno Gold 200 (PT) and Pavafloor H200/E (PF), two different epoxy resins (bisphenol A epichlorohydrin) for flooring applications. The addition of the DCAP filler to the PF samples causes a slight but acceptable decrease in the relevant mechanical properties (compressive, tensile, and flexural strengths) upon increasing DCAP content. The addition of the DCAP filler to pure epoxy (PT resin) causes a slight decrease in the tensile and flexural strengths with increasing DCAP content, while the compressive strength is almost unaffected, and the Shore hardness increases. The main mechanical properties of the PT samples are significantly better than those of the filler-bearing sample of normal production. Overall, these results suggest that DCAP can be advantageously used as filler in addition to, or in substitution for, commercial barite. In particular, the sample with 20 wt% of DCAP is the best performing in terms of compressive, tensile, and flexural strengths, whereas the sample with 30 wt% of DCAP shows the highest Shore hardness, which is an important property to be considered in flooring applications.

Water electrolysis is by far the most appealing method to produce green hydrogen. Among the possible technologies, Anion Exchange Membrane (AEM) water electrolyzers are promising in the medium term, as they make it possible to avoid critical and noble materials as catalyst components. However, AEMs are still lacking in performance and stability, which has become the current research focus. Here, we report the facile and inexpensive chemical modification of polyketone (PK) with a functional unit encompassing morpholinium as the positively charged group, and the fabrication of self-standing membranes. The synthesis products are investigated with an ensemble of physico-chemical and spectroscopic techniques, including solid-state and time-domain NMR, FT-IR, and thermal analysis. The membranes show good Ion Exchange Capacity values in the range 1.48–2.24 mmol g−1. A preliminary electrolysis test shows that the PK-based membrane has performance comparable to that of a commercial one.

Lithium metal batteries (LMBs) will be a breakthrough in automotive applications, but they require the development of next-generation solid-state electrolytes (SSEs) to stabilize the anode interface. Polymer-in-ceramic PEO/TiO

Water-in-salt solutions, i.e. solutions in which the amount of salt by volume or weight is larger than that of the solvent, are attracting increasing attention in electrochemistry due to their distinct features that often include decomposition potentials much higher than those of lower concentration solutions. Despite the high solubility of potassium acetate (KAC) in water at room temperature (up to 25 moles of salt per kg of solvent), the low cost, and the large availability, the use of highly concentrated KAC solutions is still limited to a few examples in energy storage applications and a systematic study of their physical-chemical properties is lacking. To fill this gap, we have investigated the thermal, rheological, electrical, electrochemical, and spectroscopic features of KAC/water solutions in the compositional range between 1 and 25 mol kg-1. We show the presence of a transition between the "salt-in-solvent" and "solvent-in-salt" regimes in the range of 10-15 mol kg-1. Among the explored compositions, the highest concentrations (20 and 25 mol kg-1) exhibit good room temperature conductivity values (55.6 and 31 mS cm-1, respectively) and a large electrochemical potential window (above 2.5 V).

The design and development of contrast agents (CAs) for magnetic resonance imaging (MRI) in clinical analysis is expected to improve the image spatial resolution and to increase the detection sensitivity, especially regarding neurological disorders and cancer disease. In particular, advanced CAs for T1-weighted images are investigated to achieve the sensitive detection of early-stage primary tumors or brain metastases. In this study, we present a strategy toward diagnostic T1 CAs for MRI, based on polymer-modified MnO nanoparticles (NPs). Two different nanosystems were synthesized, consisting of (1) colloidal MnO nanocrystals wrapped by a multidentate amphiphilic polymer and (2) MnO nanocrystals embedded within poly(lactic-co-glycolic acid) (PLGA) NPs. These nanosystems were compared in terms of their MRI contrast power and biological safety. The latter system combines the excellent biocompatibility of PLGA with the unique magnetic properties of MnO NPs and allows sustained contrast enhancement over time. Longitudinal relaxivities of both MnO composite nanomaterials proved to be higher than those of commercial Gd-based CAs and Teslascan, both in phosphate-buffered saline and in plasma, also exhibiting low cytotoxicity. The high relaxation rates achieved with these contrast enhancers are promising toward future application in in vivo imaging.

The localization of the rubber vulcanization reaction close to the silica filler surface was investigated in isoprene rubber composites (IR NCs): the main goal was to highlight the role of curing agents’ dispersion and filler surface features on the spatial propagation of the rubber cross-links and the resulting mechanical behavior of the material. The study was realized by tailoring the morphology of the curing activator, i.e. by vulcanizing IR NCs with Zn@SiO2 double function filler, composed of Zn(II) single sites anchored on SiO2 filler, in comparison to silica filled IR NCs vulcanized with microcrystalline ZnO. The microscopic cross-links distribution was measured by Transmission Electron Microscopy for network visualization (NVTEM) and Time Domain Nuclear Magnetic Resonance (TD-NMR). Besides the NCs mechanical behavior was characterized both at small strain and at fracture. In the presence of Zn@SiO2, higher cross-link density in proximity to SiO2 particles was evidenced, which gradually spreads from the filler surface to the bulk, induced by localization of the Zn(II) centers. IR NCs with Zn@SiO2 resulted stiffer (+45%) and with a lower fracture toughness (less than one third), compared to m-ZnO based NCs, which shows a quite homogeneous structure of the rubber cross-links network. The results highlighted the correlation between the composites structural features and their macroscopic behavior, paving the way to modulating the mechanical properties of elastomeric materials by tuning the nature of the curing agents.

Lithium metal batteries (LMBs) will be a breakthrough in automotive applications, but they require the development of next-generation solid-state electrolytes (SSEs) to stabilize the anode interface. Polymer-in-ceramic PEO/TiO2 nanocomposite SSEs show outstanding properties, allowing unprecedented LMBs durability and self-healing capabilities. However, the mechanism underlying the inhibition/delay of dendrite growth is not well understood. In fact, the inorganic phase could act as both a chemical and a mechanical barrier to dendrite propagation. Combining advanced in situ and ex situ experimental techniques, we demonstrate that oligo(ethylene oxide)-capped TiO2, although chemically inert toward lithium metal, imparts SSE with mechanical and dynamical properties particularly favorable for application. The self-healing characteristics are due to the interplay between mechanical robustness and high local polymer mobility which promotes the disruption of the electric continuity of the lithium dendrites (razor effect).

Sensitized triplet-triplet annihilation-based photon upconversion is a photo-physical process that affords anti-Stokes-shifted emission after annihilation of two metastable triplet excitons of an emitter dye and the formation of a fluorescent singlet state. While this process readily occurs in solutions under conditions where the mobility of the dye molecules is high, particular architectures are required to facilitate efficient energy transfers in solid polymers. One possibility is to incorporate liquid upconverting domains into solid polymer matrices. Another possibility is to reduce the intermolecular distance between the dyes below the Dexter radius, allowing exciton migration via triplet hopping. We introduce herein nanostructured materials that combine both of these features. These glassy nanostructured polymer systems contain liquid upconverting nanodroplets that are stabilized with a block copolymer surfactant and are fabricated under ambient conditions in a facile one-step protocol. The dyes concentrate in the nanostructured liquid domains, and this enables hopping-mediated ET and TTA between the dyes and leads to an upconversion efficiency of similar to 20%.

The dynamics of xenon gas, loaded in a series of 1-alkyl-3-methylimidazolium based ionic liquids, probes the formation of increasingly blurred polar/apolar nanodomains as a function of the anion type and the cation chain length. Exploiting 129 Xe NMR spectroscopy techniques, like Pulse Gradient Spin Echo (PGSE) and inversion recovery (IR), the diffusion motion and relaxation times are determined for 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [Cn C1 im][TFSI]. A correlation between the ILs nano-structure and both xenon diffusivity and relaxation times, as well as chemical shifts, is outlined. Interestingly, comparison with previous results of the same properties in the homologous imidazolium chlorides and hexafluorophospate shows an opposite trend with the alkyl chain length. Classical molecular dynamics (MD) simulations are used to calculate the xenon and cation and anion diffusion coefficients in the same systems, including imidazolium cations with longer chains (n=4, 6, 8 … 20). An almost quantitative agreement with the experiments validates the MD simulations and, at the same time, provides the necessary structural and dynamic microscopic insights on the nano-segregation and diffusion of xenon in bistriflimide, chloride and hexafluorphosphate salts allowing to observe and rationalize the shaping effect of the cation in the nanostructure.

Ionic liquid (IL) mixtures enable the design of fluids with finely tuned structural and physicochemical properties for myriad applications. In order to rationally develop and design IL mixtures with the desired properties, a thorough understanding of the structural origins of their physicochemical properties and the thermodynamics of mixing needs to be developed. To elucidate the structural origins of the excess molar volume within IL mixtures containing ions with different alkyl chain lengths, 3 IL mixtures containing 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ILs have been explored in a joint small angle X-ray scattering (SAXS) and 129Xe NMR study. The apolar domains of the IL mixtures were shown to possess similar dimensions to the largest alkyl chain of the mixture with the size evolution determined by whether the shorter alkyl chain was able to interact with the apolar domain. 129Xe NMR results illustrated that the origin of excess molar volume in these mixtures was due to fluctuations within these apolar domains arising from alkyl chain mismatch, with the formation of a greater number of smaller voids within the IL structure. These results indicate that free volume effects for these types of mixtures can be predicted from simple considerations of IL structure and that the structural basis for the formation of excess molar volume in these mixtures is substantially different to IL mixtures formed of different types of ions.

The formation of block copolymer nanoparticles is commonly obtained by switching solvent quality from good solvent for both blocks to a selective solvent for one block. The effect of the selective solvent on particle dimension, shape and inner structure has been analyzed in detail, instead less attention has been focused on the role of the common solvent. Poly(ethylene oxide)-block-poly(lactic acid) (PEO-b-PLA) is widely used for the preparation of nanometric drug delivery systems and the control of the particle morphology has relevant effects on bioactivity. In this work we investigate the effect of using different common solvents (acetone, dioxane, tetrahydrofuran, dimethylformamide) on the self-assembly behavior of narrowly dispersed PEO-b-PLA copolymers, synthesized by metal free ring-opening polymerization, with large variation of molecular weight of the hydrophobic block (from 65 to 1300 lactic units). Dynamic light scattering (DLS) and cryo-electron microscopy (cryo-EM) analyses of PEO-b-PLA nanoparticles reveal that their size and shape are strongly dependent on the hydrogen bonding ability of the common solvent used in the self-assembly process. As consequence of these variations, also the cytoxicity of the nanoparticles is affected.

Developing new materials for the separation of gas mixtures is a key subject in setting up a circular economy. In this work, we report the synthesis and application of novel polymeric membranes, based on polymerized ionic liquids (PILs), to be used for CO2 separation from different gas pairs. Phosphonium-based PILs have been copolymerized within an original acrylate formulation that allowed the development of dense membranes able to overcome some of the main limitations related to ionic liquid membranes. Thereby, a collection of phosphonium ionic liquids has been investigated by evaluating the influence of the alkyl chain length and anion type on membrane structure and properties by employing a series of different chemo-physical characterization techniques. The membranes showed a marked preference toward CO2 permeation in the wet state, which simulates the conditions occurring with many CO2-containing gas streams, with two of the studied membranes exceeding the Robeson upper bound for the CO2/H2 gas pair.

Photon upconversion based on sensitized triplet–triplet annihilation (sTTA-UC) is a wavelength-shifting technique with potential use in actuators, sensing, and solar technologies. In sTTA-UC, the upconverted photons are the result of radiative recombination of high-energy singlets, which are created through the fusion of metastable triplets of two annihilator/emitter molecules. The emitter triplets are populated via energy transfer (ET) from a low-energy absorbing light-harvester/sensitizer. The process is highly efficient at low powers in solution but becomes relatively ineffective in solid matrices since the limited molecular mobility precludes bimolecular interactions. The realization of efficient solid-state upconverters that exhibit long-term stability and are compatible with industrial fabrication processes is an open challenge. Here, nanophase-separated polymer systems synthesized under ambient conditions that contain the upconverting dyes in liquid nanodomains is reported. The nanostructured polymers show an excellent optical quality, an outstanding upconversion efficiency of up to ≈23%, and excellent stability in air, with only negligible performance losses over a period of three months. Moreover, the dyes’ confinement in nanosized domains

We perform redundant x-ray diffraction versus temperature experiments in bulk transparent KTN. We find a violation of the standard perovskite cubic-to-tetragonal symmetry breaking at the Curie point in the form of an orthorhombic cell distortion. The lattice distortion spans coherently macroscopic volumes of the sample and is characterized by a negative-to-zero thermal volume expansion. Dielectric measurements and calorimetry indicate that the anomalous behavior is not associated to a distinct thermodynamic phase. The comparison of linear and nonlinear optical scattering experiments with structural data suggests that the lattice distortion is a consequence of strain relaxation to a 3D superlattice of polarization vortices.

The translational dynamics of xenon gas dissolved in room-temperature ionic liquids (RTILs) is revealed by 129Xe NMR and molecular dynamics (MD) simulations. The dynamic behavior of xenon gas loaded in 1-alkyl-3-methylimidazolium chloride, [CnC1im]Cl (n = 6, 8, 10), and hexafluorophosphate, [CnC1im][PF6] (n = 4, 6, 8, 10) has been determined by measuring the 129Xe diffusion coefficients and NMR relaxation times. The analysis of the experimental NMR data demonstrates that, in these representative classes of ionic liquids, xenon motion is influenced by the length of the cation alkyl chain and anion type. 129Xe spin-lattice relaxation times are well described with a monoexponential function, indicating that xenon gas in ILs effectively experiences a single average environment. These experimental results can be rationalized based on the analysis of classical MD trajectories. The mechanism described here can be particularly useful in understanding the separation and adsorption properties of RTILs.

International audience; This article contributes to the study of climate debates online by examining how the IPCC Special Report on Global Warming of 1.5°C (SR15) played out on YouTube following its release in October 2018. We examined features of 40 videos that ranked the highest in YouTube's search engine over the course of four weeks after the publication of the report. Additionally, this study examines the shifting visibility of the videos, the nature of the channels that published them and the way in which they articulated the issue of climate change. We found that media activity around SR15 was animated by a mix of professional and user-led channels, with the former enjoying higher and more stable visibility in YouTube ranking. We identified four main recurrent themes: disaster and impacts, policy options and solutions, political and ideological struggles around climate change and contested science. The discussion of policy options and solutions was particularly prominent. Critiques of the SR15 report took different forms: as well as denialist videos which downplayed the severity of climate change, there were also several clips which criticized the report for underestimating the extent of warming or overestimating the feasibility of proposed policies. Contents Introduction Research approach and method The IPCC communication strategy and SR15 Features of top ranking videos Visibility of top ranking videos Salient themes in top ranked videos Conclusion

Lithium Metal Batteries (LMB) require solid or quasi-solid electrolytes able to block dendrites formation during cell cycling. Polymer-in-ceramic nanocomposites with the ceramic fraction exceeding the one normally used as the filler (>10 ÷ 15 wt%) are among the most interesting options on the table. Here, we report on a new hybrid material encompassing brush-like TiO2 nanocrystals functionalized with low molecular weight poly(ethylene oxide) (PEO). The nanocomposite electrolyte membranes are then obtained by blending the brush-like nanocrystals with high molecular weight PEO and LiTFSI. The intrinsic chemical compatibility among the PEO moieties allows a TiO2 content as high as ∼39 wt% (90:10 w/w functionalized nanocrystals/PEO-LiTFSI), while maintaining good processability and mechanical resistance. The 50:50 w/w nanocomposite electrolyte (18.8 wt% functionalized TiO2) displays ionic conductivity of 3 × 10−4 S cm−1 at 70 °C. Stripping/plating experiments show an excellent long-term behavior even at relatively high currents of 200 μA cm−2. Upon testing in a lab-scale Li/electrolyte/LiFePO4 cell, the material delivers 130 mAh g−1 and 120 mAh g−1 after 40 and 50 cycles at 0.05 and 0.1 mA, respectively, with Coulombic efficiency exceeding 99.5%, which demonstrates the very promising prospects of these newly developed nanocomposite solid electrolyte for future development of LMBs.