Search

For high-intensity laser-solid interactions, the absolute density and surface density gradients of the target at the arrival of the ultra-relativistic laser peak are critical parameters. Accurate modeling of the leading edge-driven target pre-expansion is desired to strengthen the predictive power of associated computer simulations. The transition from an initial solid state to a plasma state, i.e., the breakdown of the solid, defines the starting point of the subsequent target pre-expansion. In this work, we report on the time-resolved observation of transient laser-induced breakdown (LIB) during the leading edge of high-intensity petawatt-class laser pulses with peak intensities of up to 5.7 × 10^21 W/cm^2 in interaction with dielectric cryogenic hydrogen jet targets. LIB occurs much earlier than what is typically expected following the concept of barrier suppression ionization. The observation is explained by comparing a characterization study of target specific LIB thresholds with laser contrast measurements. The results demonstrate the relevance of the laser pulse duration dependence of LIB for high-intensity laser-solid interactions. We provide an effective approach to determine the onset of LIB and thereby the starting point of target pre-expansion in other laser-target systems.

Nature Communications 12(1), 1638 (2021). doi:10.1038/s41467-021-21756-6, Key insights in materials at extreme temperatures and pressures can be gained by accurate measurements that determine the electrical conductivity. Free-electron laser pulses can ionize and excite matter out of equilibrium on femtosecond time scales, modifying the electronic and ionic structures and enhancing electronic scattering properties. The transient evolution of the conductivity manifests the energy coupling from high temperature electrons to low temperature ions. Here we combine accelerator-based, high-brightness multi-cycle terahertz radiation with a single-shot electro-optic sampling technique to probe the evolution of DC electrical conductivity using terahertz transmission measurements on sub-picosecond time scales with a multi-undulator free electron laser. Our results allow the direct determination of the electron-electron and electron-ion scattering frequencies that are the major contributors of the electrical resistivity., Published by Nature Publishing Group UK, [London]

High-intensity short-pulse lasers have made possible the generation of energetic proton beams, unlocking numerous applications in high energy density science. One such application is uniform and isochoric heating of materials to the warm dense matter (WDM) state. We have developed a new experimental platform to simultaneously create and probe WDM at the matter in extreme conditions (MEC) end station at the Linac Coherent Light Source (LCLS). The short pulse optical laser (delivering up to 1 J in 45 fs) and the ultrabright LCLS X-ray laser with tunable frequency, respectively, deliver high power required to heat materials to WDM and precision-timed high-resolution X-rays to probe them. The laser-accelerated proton beam driven from a flat 1.5- $\mu \text{m}$ Cu foil was first measured then directed to a secondary sample of Al or polypropylene (PP), typically 300– $400~\mu \text{m}$ away. The time evolution of the sample electron temperature was measured using streaked optical pyrometry, where we observed a peak temperature of 0.9 ± 0.15 eV on the rear surface of an Al sample heated by the proton beam. Simulations using the hybrid-PIC code LSP and the rad-hydro code HELIOS show that a measured proton beam can heat Al to approximately 4 eV and PP to 1 eV if instead focused by a hemispherical Cu target. Through additional LSP simulations, we anticipate creating hotter WDM states (~20 eV) by increasing the laser energy to 10 J and keeping the other laser parameters fixed.

Due to the non-linear nature of relativistic laser induced plasma processes, the development of laser-plasma accelerators requires precise numerical modeling. Especially high intensity laser-solid interactions are sensitive to the temporal laser rising edge and the predictive capability of simulations suffers from incomplete information on the plasma state at the onset of the relativistic interaction. Experimental diagnostics utilizing ultra-fast optical backlighters can help to ease this challenge by providing temporally resolved inside into the plasma density evolution. We present the successful implementation of an off-harmonic optical probe laser setup to investigate the interaction of a high-intensity laser at $$5.4\times 10^{21}\,\hbox {W/cm}^{2}$$ 5.4 × 10 21 W/cm 2 peak intensity with a solid-density cylindrical cryogenic hydrogen jet target of $${5}\,{\upmu }\mathrm{m}$$ 5 μ m diameter as a target test bed. The temporal synchronization of pump and probe laser, spectral filtering and spectrally resolved data of the parasitic plasma self-emission are discussed. The probing technique mitigates detector saturation by self-emission and allowed to record a temporal scan of shadowgraphy data revealing details of the target ionization and expansion dynamics that were so far not accessible for the given laser intensity. Plasma expansion speeds of up to $$(2.3 \pm 0.4)\times 10^{7}\,\hbox {m/s}$$ ( 2.3 ± 0.4 ) × 10 7 m/s followed by full target transparency at $${1.4}\,{\mathrm{ps}}$$ 1.4 ps after the high intensity laser peak are observed. A three dimensional particle-in-cell simulation initiated with the diagnosed target pre-expansion at $${-0.2}\,{\mathrm{ps}}$$ - 0.2 ps and post processed by ray tracing simulations supports the experimental observations and demonstrates the capability of time resolved optical diagnostics to provide quantitative input and feedback to the numerical treatment within the time frame of the relativistic laser-plasma interaction.

In pump–probe experiments with an X-ray Free Electron Laser (XFEL) and a high-power optical laser, spatial overlap of the two beams must be ensured to probe a pumped area with the x-ray beam. A beam monitoring diagnostic is particularly important in short-pulse laser experiments where a tightly focused beam is required to achieve a relativistic laser intensity for generation of energetic particles. Here, we report the demonstration of on-shot beam pointing measurements of an XFEL and a terawatt class femtosecond laser using 2D monochromatic Kα imaging at the Matter in Extreme Conditions end-station of the Linac Coherent Light Source. A thin solid titanium foil was irradiated by a 25-TW laser for fast electron isochoric heating, while a 7.0 keV XFEL beam was used to probe the laser-heated region. Using a spherical crystal imager (SCI), the beam overlap was examined by measuring 4.51 keV Kα x rays produced by laser-accelerated fast electrons and the x-ray beam. Measurements were made for XFEL-only at various focus lens positions, laser-only, and two-beam shots. Successful beam overlapping was observed on ∼58% of all two-beam shots for 10 μm thick samples. It is found that large spatial offsets of laser-induced Kα spots are attributed to imprecise target positioning rather than shot-to-shot laser pointing variations. By applying the Kα measurements to x-ray Thomson scattering measurements, we found an optimum x-ray beam spot size that maximizes scattering signals. Monochromatic x-ray imaging with the SCI could be used as an on-shot beam pointing monitor for XFEL-laser or multiple short-pulse laser experiments.

This protocol presents a detailed procedure for the operation of continuous, micron-sized cryogenic cylindrical and planar liquid jets. When operated as described here, the jet exhibits high laminarity and stability for centimeters. Successful operation of a cryogenic liquid jet in the Rayleigh regime requires a basic understanding of fluid dynamics and thermodynamics at cryogenic temperatures. Theoretical calculations and typical empirical values are provided as a guide to design a comparable system. This report identifies the importance of both cleanliness during cryogenic source assembly and stability of the cryogenic source temperature once liquefied. The system can be used for high repetition rate laser-driven proton acceleration, with an envisioned application in proton therapy. Other applications include laboratory astrophysics, materials science, and next-generation particle accelerators.

Extreme field gradients intrinsic to relativistic laser plasma interactions enable compact MeV proton accelerators with unique bunch characteristics. Yet, direct control of the proton beam profile is usually not possible. So far, only complex micro-engineering of the relativistic plasma accelerator itself and limited adoption of conventional beam optics provided access to global beam parameters that define propagation. We present a novel, counter-intuitive all-optical approach to imprint detailed spatial information from the driving laser pulse to the proton bunch. The concept was motivated by an effect initially observed in an experiment dedicated to laser-driven proton acceleration from a renewable micrometer sized cryogenic Hydrogen jet target at the 150 TW Draco laser at HZDR. A compact, recollimating single plasma mirror was used to enhance the temporal laser contrast, which could be monitored on a single-shot base by means of self-referenced spectral interferometry with extended time excursion (SRSI-ETE) at unprecedented dynamic and temporal range. Unexpectedly, the accelerated proton beam profile showed in this experiment prominent features of the collimated laser beam, such as the shadow of obstacles inserted deliberately in the beam. In a series of further experiments, the spatial profile of the energetic proton bunch was found to exhibit identical features as the fraction of the laser pulse passing around a target of limited size. The formation of quasi-static electric fields in the beam path by ionization of residual gas in the experimental chamber results in asynchronous information transfer between the laser pulse and the naturally delayed proton bunch. Such information transfer between the laser pulse and the naturally delayed proton bunch is attributed to the formation of quasi-static electric fields in the beam path by ionization of residual gas. Essentially acting as a programmable memory, these fields provide access to a new level of proton beam manipulation.

We discuss the possibility of obtaining highly precise measurements of the ionization potential depression in dense plasmas with spectrally resolved X-ray scattering, while simultaneously determining the electron temperature and the free electron density. A proof-of-principle experiment at the Linac Coherent Light Source, probing isochorically heated carbon samples, demonstrates the capabilities of this method and motivates future experiments at X-ray free electron laser facilities.

We show efficient laser driven proton acceleration up to 14MeV from a 50 $\mu$m thick cryogenic hydrogen ribbon. Pulses of the short pulse laser ELFIE at LULI with a pulse length of $\approx$ 350 fs at an energy of 8 J per pulse are directed onto the target. The results are compared to proton spectra from metal and plastic foils with different thicknesses and show a similar good performance both in maximum energy as well as in proton number. Thus, this target type is a promising candidate for experiments with high repetition rate laser systems., Comment: 9 pages

The shock-induced transition from graphite to diamond has been of great scientific and technological interest since the discovery of microscopic diamonds in remnants of explosively driven graphite. Furthermore, shock synthesis of diamond and lonsdaleite, a speculative hexagonal carbon polymorph with unique hardness, is expected to happen during violent meteor impacts. Here, we show unprecedented in situ X-ray diffraction measurements of diamond formation on nanosecond timescales by shock compression of pyrolytic as well as polycrystalline graphite to pressures from 19 GPa up to 228 GPa. While we observe the transition to diamond starting at 50 GPa for both pyrolytic and polycrystalline graphite, we also record the direct formation of lonsdaleite above 170 GPa for pyrolytic samples only. Our experiment provides new insights into the processes of the shock-induced transition from graphite to diamond and uniquely resolves the dynamics that explain the main natural occurrence of the lonsdaleite crystal structure being close to meteor impact sites., Shock synthesis of diamond and even harder carbon polymorphs from graphite is of great interest for science and technology. Here, the authors present unprecedented in situ measurements of the structural changes, showing ultrafast formation of diamond and, at higher pressures, evidence for a pure lonsdaleite structure.

Here, we extend flatbed scanner calibrations of GafChromic EBT3, MD-V3, and HD-V2 radiochromic films using high-precision x-ray irradiation and monoenergetic proton bombardment. By computing a visibility parameter based on fractional errors, optimal dose ranges and transitions between film types are identified. The visibility analysis is used to design an ideal radiochromic film stack for the proton energy spectrum expected from the interaction of a petawatt laser with a cryogenic hydrogen jet target.

We determine the strength of laser shock-compressed polycrystalline diamond at stresses above the Hugoniot elastic limit using a technique combining x-ray diffraction from the Linac Coherent Light Source with velocity interferometry. X-ray diffraction is used to measure lattice strains, and velocity interferometry is used to infer shock and particle velocities. These measurements, combined with density-dependent elastic constants calculated using density functional theory, enable determination of material strength above the Hugoniot elastic limit. Our results indicate that diamond retains approximately 20 GPa of strength at longitudinal stresses of 150–300 GPa under shock compression.

Collisionless shock acceleration of protons and C$^{6+}$ ions has been achieved by the interaction of a 10$^{20}$ W/cm$^2$, 1 $\mu$m laser with a near-critical density plasma. Ablation of the initially solid density target by a secondary laser allowed for systematic control of the plasma profile. This enabled the production of beams with peaked spectra with energies of 10-18 MeV/a.m.u. and energy spreads of 10-20$\%$ with up to 3x10$^9$ particles within these narrow spectral features. The narrow energy spread and similar velocity of ion species with different charge-to-mass ratio are consistent with acceleration by the moving potential of a shock wave. Particle-in-cell simulations show shock accelerated beams of protons and C$^{6+}$ ions with energy distributions consistent with the experiments. Simulations further indicate the plasma profile determines the trade-off between the beam charge and energy and that with additional target optimization narrow energy spread beams exceeding 100 MeV/a.m.u. can be produced using the same laser conditions., Comment: Accepted for publication in Physical Review Accelerators and Beams

International audience; We describe a setup for performing inelastic X-ray scattering and X-ray diffraction measurements at the Matter in Extreme Conditions (MEC) endstation of the Linac Coherent Light Source. This technique is capable of performing high-, meV-resolution measurements of dynamic ion features in both crystalline and non-crystalline materials. A four-bounce silicon (533) monochromator was used in conjunction with three silicon (533) diced crystal analyzers to provide an energy resolution of ∼50 meV over a range of ∼500 meV in single shot measurements. In addition to the instrument resolution function, we demonstrate the measurement of longitudinal acoustic phonon modes in polycrystalline diamond. Furthermore, this setup may be combined with the high intensity laser drivers available at MEC to create warm dense matter and subsequently measure ion acoustic modes.

Probing the rapid dynamics of plasma evolution in laser-driven plasma interactions provides deeper understanding of experiments in the context of laser-driven ion acceleration and facilitates the interplay with complementing numerical investigations. Besides the microscopic scales involved, strong plasma (self-)emission, predominantly around the harmonics of the driver laser, often complicates the data analysis. We present the concept and the implementation of a stand-alone probe laser system that is temporally synchronized to the driver laser, providing probing wavelengths beyond the harmonics of the driver laser. The capability of this system is shown during a full-scale laser proton acceleration experiment using renewable cryogenic hydrogen jet targets. For further improvements, we studied the influence of probe color, observation angle of the probe and temporal contrast of the driver laser on the probe image quality.

We report experimental evidence that multi-MeV protons accelerated in relativistic laser-plasma interactions are modulated by strong filamentary electromagnetic fields. Modulations are observed when a preplasma is developed on the rear side of a $\mu$m-scale solid-density hydrogen target. Under such conditions, electromagnetic fields are amplified by the relativistic electron Weibel instability and are maximized at the critical density region of the target. The analysis of the spatial profile of the protons indicates the generation of $B>$10 MG and $E>$0.1 MV/$\mu$m fields with a $\mu$m-scale wavelength. These results are in good agreement with three-dimensional particle-in-cell simulations and analytical estimates, which further confirm that this process is dominant for different target materials provided that a preplasma is formed on the rear side with scale length $\gtrsim 0.13 \lambda_0 \sqrt{a_0}$. These findings impose important constraints on the preplasma levels required for high-quality proton acceleration for multi-purpose applications., Comment: Accepted for publication in Physical Review Letters, 5 pages, 3 figures

We report on the successful operation of a newly developed cryogenic jet target at high intensity laser-irradiation. Using the frequency-doubled Titan short pulse laser system at Jupiter Laser Facility, Lawrence Livermore National Laboratory, we demonstrate the generation of a pure proton beam a with maximum energy of 2 MeV. Furthermore, we record a quasi-monoenergetic peak at 1.1 MeV in the proton spectrum emitted in the laser forward direction suggesting an alternative acceleration mechanism. Using a solid-density mixed hydrogen-deuterium target, we are also able to produce pure proton-deuteron ion beams. With its high purity, limited size, near-critical density, and high-repetition rate capability, this target is promising for future applications.

We present the first spectrally resolved measurements of x-rays scattered from cryogenic hydrogenjets in the single photon counting limit. The 120 Hz capabilities of the LCLS, together with a novelhydrogen jet design [J. B. Kimet al., Rev. Sci. Instrum. (these proceedings)], allow for the ability torecord a near background free spectrum. Such high-dynamic-range x-ray scattering measurementsenable a platform to study ultra-fast, laser-driven, heating dynamics of hydrogen plasmas. Thismeasurement has been achieved using two highly annealed pyrolytic graphite crystal spectrometers tospectrally resolve 5.5 keV x-rays elastically and inelastically scattered from cryogenic hydrogen andfocused on Cornell-SLAC pixel array detectors [S. Herrmannet al., Nucl. Instrum. Methods Phys.Res., Sect. A718, 550 (2013)].

We present the design, construction, and first use of a magnetic electron-positron spectrometer at the Texas Petawatt Laser facility. The Global Spectrometer for Positron and Electron Characterization (GSPEC) is capable of detecting electrons and positrons over a large energy range from 3–150 MeV and has been designed to diagnose the electrons and positrons accelerated by high-intensity laser interactions with over-critical targets.

International audience

A model is presented to calculate the stopping power of ions propagating in dense matter. Comparisons with experiment in the cold dense regime are presented and discussed. Further, we present results from the warm dense matter regime and the field of high energy density physics.

Radiochromic films (RCF) are commonly used in dosimetry for a wide range of radiation sources (electrons, protons, and photons) for medical, industrial, and scientific applications. They are multi-layered, which includes plastic substrate layers and sensitive layers that incorporate a radiation-sensitive dye. Quantitative dose can be retrieved by digitizing the film, provided that a prior calibration exists. Here, to calibrate the newly developed EBT3 and HDv2 RCFs from Gafchromic™, we used the Stanford Medical LINAC to deposit in the films various doses of 10 MeV photons, and by scanning the films using three independent EPSON Precision 2450 scanners, three independent EPSON V750 scanners, and two independent EPSON 11000XL scanners. The films were scanned in separate RGB channels, as well as in black and white, and film orientation was varied. We found that the green channel of the RGB scan and the grayscale channel are in fact quite consistent over the different models of the scanner, although this comes at the cost of a reduction in sensitivity (by a factor ∼2.5 compared to the red channel). To allow any user to extend the absolute calibration reported here to any other scanner, we furthermore provide a calibration curve of the EPSON 2450 scanner based on absolutely calibrated, commercially available, optical density filters.

We report a recent experiment where the first hard x-ray beam line, X-ray Pump Probe (XPP) instrument using the SLAC National Accelerator Laboratory's Linac Coherent Light Source (LCLS) free electron laser, was used to heat thin foils to high energy densities ∼ 107 J/cm 3. An intense 9 keV, 60 fs (FWHM) duration beam with energy of 2 - 4 mJ at the XPP beam line was focused using beryllium lenses to an irradiance approaching 1016 Wcm -2. Targets of 0.5 - 3.5 μm thick foils of Ag and Cu were studied using a suite of diagnostics including Fourier Domain Interferometry, energy calorimetry and grating and crystal spectrometers. The experimental details and spectroscopic results from the campaign will be described. Preliminary results indicate that the target is heated relatively uniformly to a temperature lower than 20 eV. © 2011 SPIE.

Applied physics letters 109(3), 031108 (2016). doi:10.1063/1.4959256, We present results from time-resolved X-ray imaging and inelastic scattering on collective excitations. These data are then employed to infer the mass density evolution within laser-driven shock waves. In our experiments, thin carbon foils are first strongly compressed and then driven into a dense state by counter-propagating shock waves. The different measurements agree that the graphite sample is about twofold compressed when the shock waves collide, and a sharp increase in forward scattering indicates disassembly of the sample 1 ns thereafter. We can benchmark hydrodynamics simulations of colliding shock waves by the X-ray scattering methods employed., Published by American Inst. of Physics, Melville, NY

Laser-driven ion acceleration is of great interest across a range of disciplines with potential applications including the fast ignition approach to inertial confinement fusion and proton therapy. The most robust acceleration mechanisms studied to date however, based on target normal sheath acceleration (TNSA), do not satisfy the emittance, flux and ion energy requirements for direct applications.

The extraordinary mechanical and optical properties of diamond are the basis of numerous technical applications and make diamond anvil cells a premier device to explore the high-pressure behavior of materials. However, at applied pressures above a few hundred GPa, optical probing through the anvils becomes difficult because of the pressure-induced changes of the transmission and the excitation of a strong optical emission. Such features have been interpreted as the onset of a closure of the optical gap in diamond, and can significantly impair spectroscopy of the material inside the cell. In contrast, a comparable widening has been predicted for purely hydrostatic compressions, forming a basis for the presumed pressure stiffening of diamond and resilience to the eventual phase change to BC8. We here present the first experimental evidence of this effect at geo-planetary pressures, exceeding the highest ever reported hydrostatic compression of diamond by more than 200 GPa and any other measurement of the band gap by more than 350 GPa. We here apply laser driven-ablation to create a dynamic, high pressure state in a thin, synthetic diamond foil together with frequency-resolved x-ray scattering as a probe. The frequency shift of the inelastically scattered x-rays encodes the optical properties and,more » thus, the behavior of the band gap in the sample. Using the ultra-bright x-ray beam from the Linac Coherent Light Source (LCLS), we observe an increasing direct band gap in diamond up to a pressure of 370 GPa. This finding points to the enormous strains in the anvils and the impurities in natural Type Ia diamonds as the source of the observed closure of the optical window. Our results demonstrate that diamond remains an insulating solid to pressures approaching its limit strength.« less

The Matter in Extreme Conditions end station at the Linac Coherent Light Source (LCLS) is a new tool enabling ultrafast pump-probe measurements of laser-matter interactions. This instrument combines the world’s brightest x-ray source, the LCLS x-ray beam, with high-power lasers consisting of two nanosecond Nd:glass laser beams and a 25 TW short-pulse Ti:sapphire laser. These lasers produce short-lived states of matter with high pressures, high temperatures or high densities whose properties are investigated with highly accurate x-ray measurements. Here, we report on new results using x-ray imaging, diffraction, and scattering that resolve the short-pulse laser beam propagation and heating of matter.

We report on a high repetition rate proton source produced by high-intensity laser irradiation of a continuously flowing, cryogenic hydrogen jet. The proton energy spectra are recorded at 1Hz for Draco laser powers of 6, 20, 40, and 100 TW. The source delivers ca. 10^13 protons/MeV/sr/min. We find that the average proton number over one minute, at energies sufficiently far from the cut-off energy, is robust to laser-target overlap and nearly constant. This work is therefore a first step towards pulsed laser-driven proton sources for time-resolved radiation damage studies and applications which require quasi-continuous doses at MeV energies.

International audience; It was recently shown that a promising way to accelerate protons in the forward direction to high energies is to use under-dense or near-critical density targets instead of solids. Simulations have revealed that the acceleration process depends on the density gradients of the plasma target. Indeed, under certain conditions, the most energetic protons are predicted to be accelerated by a collisionless shock mechanism that significantly increases their energy. We report here the results of a recent experiment dedicated to the study of longitudinal ion acceleration in partially exploded foils using a high intensity (similar to 5 x 10(18) W/cm(2)) picosecond laser pulse. We show that protons accelerated using targets having moderate front and rear plasma gradients (up to similar to 8 mu m gradient length) exhibit similar maximum proton energy and number compared to proton beams that are produced, in similar laser conditions, from solid targets, in the well-known target normal sheath acceleration regime. Particle-In-Cell simulations, performed in the same conditions as the experiment and consistent with the measurements, allow laying a path for further improvement of this acceleration scheme. (C) 2014 AIP Publishing LLC.

International audience; Using ion carbon beams generated by high intensity short pulse lasers we perform measurements of single shot mean charge equilibration in cold or isochorically heated solid density aluminum matter. We demonstrate that plasma effects in such matter heated up to 1 eV do not significantly impact the equilibration of carbon ions with energies 0.045-0: 5 MeV/nucleon. Furthermore, these measurements allow for a first evaluation of semiempirical formulas or ab initio models that are being used to predict the mean of the equilibrium charge state distribution for light ions passing through warm dense matter. DOI: 10.1103/PhysRevLett.110.135003

The matter in extreme conditions end station at the Linac Coherent Light Source (LCLS) is a new tool enabling accurate pump-probe measurements for studying the physical properties of matter in the high-energy density (HED) physics regime. This instrument combines the world's brightest x-ray source, the LCLS x-ray beam, with high-power lasers consisting of two nanosecond Nd:glass laser beams and one short-pulse Ti:sapphire laser. These lasers produce short-lived states of matter with high pressures, high temperatures or high densities with properties that are important for applications in nuclear fusion research, laboratory astrophysics and the development of intense radiation sources. In the first experiments, we have performed highly accurate x-ray diffraction and x-ray Thomson scattering measurements on shock-compressed matter resolving the transition from compressed solid matter to a co-existence regime and into the warm dense matter state. These complex charged-particle systems are dominated by strong correlations and quantum effects. They exist in planetary interiors and laboratory experiments, e.g., during high-power laser interactions with solids or the compression phase of inertial confinement fusion implosions. Applying record peak brightness x-rays resolves the ionic interactions at atomic (Angstrom) scale lengths and measure the static structure factor, which is a key quantity for determining equation of state data and important transport coefficients. Simultaneously, spectrally resolved measurements of plasmon features provide dynamic structure factor information that yield temperature and density with unprecedented precision at micron-scale resolution in dynamic compression experiments. These studies have demonstrated our ability to measure fundamental thermodynamic properties that determine the state of matter in the HED physics regime.

The ultraintense short pulse laser pulses incident on solid targets can generate energetic protons. In addition to their potentially important applications such as in cancer treatments and proton fast ignition, these protons are essential to understand the complex physics of intense laser plasma interaction. To better characterize these laser-produced protons, we designed and constructed a novel spectrometer that will not only measure proton energy distribution with high resolution but also provide its angular characteristics. The information obtained from this spectrometer compliments those from commonly used diagnostics including radiochromic film packs, CR39 nuclear track detectors, and nonimaging magnetic spectrometers. The basic characterizations and sample data from this instrument are presented.

Strong plasmon resonances characteristics of electron density fluctuations have recently been observed in dynamically compressed diamond for the first time at the Linac Coherent Light Source. These experiments observe the forward scattering spectra from 8 keV x-ray pulses at record peak brightness to probe laser-compressed diamond foils at the Matter in Extreme Conditions instrument. We demonstrate single-shot measurements of the x-ray scattering spectrum, which are sensitive to the temperatures and densities of the compressed samples. The inferred values from the inelastic scattering are compared to simulations, finding good agreement with the temperature and demonstrating the need to include solid state effects in the modeling of the plasmon oscillation.

Recent experiments performed at the Matter in Extreme Conditions end station of the Linac Coherent Light Source (LCLS) have demonstrated the first spectrally resolved measurements of plasmons from isochorically heated aluminum. The experiments have been performed using a seeded 8-keV x-ray laser beam as a pump and probe to both volumetrically heat and scatter x-rays from aluminum. Collective x-ray Thomson scattering spectra show a well-resolved plasmon feature that is down-shifted in energy by 19 eV. In addition, Mbar shock pressures from laser-compressed aluminum foils using velocity interferometer system for any reflector have been measured. The combination of experiments fully demonstrates the possibility to perform warm dense matter studies at the LCLS with unprecedented accuracy and precision.

We have developed a new experimental platform at the Linac Coherent Light Source (LCLS) which combines simultaneous angularly and spectrally resolved x-ray scattering measurements. This technique offers a new insights on the structural and thermodynamic properties of warm dense matter. The < 50 fs temporal duration of the x-ray pulse provides near instantaneous snapshots of the dynamics of the compression. We present a proof of principle experiment for this platform to characterize a shock-compressed plastic foil. We observe the disappearance of the plastic semi-crystal structure and the formation of a compressed liquid ion-ion correlation peak. The plasma parameters of shock-compressed plastic can be measured as well, but requires an averaging over a few tens of shots.

Intense research is being conducted into sources of laser-accelerated ions and their application. Particular attention is now given to the low-density regime of laser ion acceleration. In this regime, volume effects are expected to dominate, while for solid foils, ion acceleration is directly related to the electron surface density and the number of accelerated ions is limited. Simulations therefore show that it is possible to reach high ion energies with a high number of accelerated ions and a high conversion efficiency. This scheme also leads to less debris than solid foils and is more adapted to high repetition lasers. Due to the difficulty in generating short and dense gas jets experimentally, we have decided to study this regime using very thin foils exploded by a longer, lower intensity pulse. As this regime scales well with laser energy, experiments were recently performed with a high laser energy (∼180 J) on the LLNL Titan laser. A secondary long pulse laser was used to control the density profile of the target. Preliminary analysis suggests that, in this high-energy regime, protons of high energies and with good beam quality were obtained when exploding the foil. We present new simulation results exploring the laser ion acceleration mechanism in laser and plasma conditions close to those of these experiments. These results demonstrate that low-density targets are a promising candidate for an efficient proton source. This source can be optimized by choosing appropriate plasma conditions.

We present a method to estimate the nuclear component of the stopping power of ions propagating in dense matter. Three kinds of effective pair potentials are proposed. Results from the warm dense matter regime and the domain of high energy density physics are presented and discussed for proton and helium. The role of ionic temperature is examined. The nuclear stopping power can play a noticeable role in hot dense matter.

Nature Communications 9(1), 5292 (2018). doi:10.1038/s41467-018-07756-z, Extreme field gradients intrinsic to relativistic laser-interactions with thin solid targets enable compact MeV proton accelerators with unique bunch characteristics. Yet, direct control of the proton beam profile is usually not possible. Here we present a readily applicable all-optical approach to imprint detailed spatial information from the driving laser pulse onto the proton bunch. In a series of experiments, counter-intuitively, the spatial profile of the energetic proton bunch was found to exhibit identical structures as the fraction of the laser pulse passing around a target of limited size. Such information transfer between the laser pulse and the naturally delayed proton bunch is attributed to the formation of quasi-static electric fields in the beam path by ionization of residual gas. Essentially acting as a programmable memory, these fields provide access to a higher level of proton beam manipulation., Published by Nature Publishing Group UK, [London]

High-intensity laser accelerated protons and ions are emerging sources with complementary characteristics to those of conventional sources, namely high charge, high current, and short bunch duration, and therefore can be useful for dedicated applications. However, these beams exhibit a broadband energy spectrum when, for some experiments, monoenergetic beams are required. We present here an adaptation of conventional chicane devices in a compact form (10 cm × 20 cm) which enables selection of a specific energy interval from the broadband spectrum. This is achieved by employing magnetic fields to bend the trajectory of the laser produced proton beam through two slits in order to select the minimum and maximum beam energy. The device enables a production of a high current, short duration source with a reproducible output spectrum from short pulse laser produced charged particle beams.