Search

In this study, we report the design, synthesis, characterization and solvent dependent behaviour of series of new bipyridine cored poly(benzyl-ether) dendrons functionalized with tertiary butyl esters.

Drug delivery platforms are anticipated to have biocompatible and bioinert surfaces. PEGylation of drug carriers is the most approved method since it improves water solubility and colloid stability and decreases the drug vehicles' interactions with blood components. Although this approach extends their biocompatibility, biorecognition mechanisms prevent them from biodistribution and thus efficient drug transfer. Recent studies have shown (poly)zwitterions to be alternatives for PEG with superior biocompatibility. (Poly)zwitterions are super hydrophilic, mainly stimuli-responsive, easy to functionalize and they display an extremely low protein adsorption and long biodistribution time. These unique characteristics make them already promising candidates as drug delivery carriers. Furthermore, since they have highly dense charged groups with opposite signs, (poly)zwitterions are intensely hydrated under physiological conditions. This exceptional hydration potential makes them ideal for the design of therapeutic vehicles with antifouling capability

So far, many studies on the oxygen-evolution reaction (OER) by Mn oxides have been focused on activity; however, the identification of the best performing active site and corresponding catalytic cycles is also of critical importance. Herein, the real intrinsic activity of layered Mn oxide toward OER in Fe/Ni-free KOH is studied for the first time. At pH ≈ 14, the onset of OER for layered Mn oxide in the presence of Fe/Ni-free KOH happens at 1.72 V (vs reversible hydrogen electrode (RHE)). In the presence of Fe ions, a 190 mV decrease in the overpotential of OER was recorded for layered Mn oxide as well as a significant decrease (from 172.8 to 49 mV/decade) in the Tafel slope. Furthermore, we find that both Ni and Fe ions increase OER remarkably in the presence of layered Mn oxide, but that pure layered Mn oxide is not an efficient catalyst for OER without Ni and Fe under alkaline conditions. Thus, pure layered Mn oxide and electrolytes are critical factors in finding the real intrinsic activity of layered Mn oxide for OER. Our results call into question the high efficiency of layered Mn oxides toward OER under alkaline conditions and also elucidate the significant role of Ni and Fe impurities in the electrolyte in the presence of layered Mn oxide toward OER under alkaline conditions. Overall, a computational model supports the conclusions from the experimental structural and electrochemical characterizations. In particular, substitutional doping with Fe decreases the thermodynamic OER overpotential up to 310 mV. Besides, the thermodynamic OER onset potential calculated for the Fe-free structures is higher than 1.7 V (vs RHE) and, thus, not in the stability range of Mn oxides.

The structure–activity relationship is a cornerstone topic in catalysis, which lays the foundation for the design and functionalization of catalytic materials. Of particular interest is the catalysis of the hydrogen evolution reaction (HER) by palladium (Pd), which is envisioned to play a major role in realizing a hydrogen-based economy. Interestingly, experimentalists observed excess heat generation in such systems, which became known as the debated “cold fusion” phenomenon. Despite the considerable attention on this report, more fundamental knowledge, such as the impact of the formation of bulk Pd hydrides on the nature of active sites and the HER activity, remains largely unexplored. In this work, classical electrochemical experiments performed on model Pd(hkl) surfaces, “noise” electrochemical scanning tunneling microscopy (n-EC-STM), and density functional theory are combined to elucidate the nature of active sites for the HER. Results reveal an activity trend following Pd(111) > Pd(110) > Pd(100) and that the forma?tion of subsurface hydride layers causes morphological changes and strain, which affect the HER activity and the nature of active sites. These findings provide significant insights into the role of subsurface hydride formation on the structure–activity relations toward the design of efficient Pd-based nanocatalysts for the HER.

Summary The trade-off between selectivity and adsorption capacity with porous materials is a major roadblock to reducing the energy footprint of gas separation technologies. To address this matter, we report herein a systematic crystal engineering study of C2H2 removal from CO2 in a family of hybrid ultramicroporous materials (HUMs). The HUMs are composed of the same organic linker ligand, 4-(3,5-dimethyl-1H-pyrazol-4-yl)pyridine, pypz, three inorganic pillar ligands, and two metal cations, thereby affording six isostructural pcu topology HUMs. All six HUMs exhibited strong binding sites for C2H2 and weaker affinity for CO2. The tuning of pore size and chemistry enabled by crystal engineering resulted in benchmark C2H2/CO2 separation performance. Fixed-bed dynamic column breakthrough experiments for an equimolar (v/v = 1:1) C2H2/CO2 binary gas mixture revealed that one sorbent, SIFSIX-21-Ni, was the first C2H2 selective sorbent that combines exceptional separation selectivity (27.7) with high adsorption capacity (4 mmol·g−1)., Graphical abstract, Highlights • Six isostructural hybrid ultramicroporous materials are prepared and characterized • Crystal engineering approach enabled fine-tuning of pore size and chemistry • Weak CO2/strong C2H2 affinity resulted in high C2H2/CO2 separation selectivities • SIFSIX-21-Ni: benchmark selectivity/uptake capacity for C2H2/CO2 separation, The bigger picture It is generally recognized that porous solids (sorbents) with high selectivity and high adsorption capacity offer potential for energy-efficient gas separations. Unfortunately, there is generally a trade-off between capacity and selectivity, which represents a roadblock to the utility of sorbents in key industrial processes. For example, acetylene (C2H2), an important fuel and chemical intermediate, is produced with CO2 as an impurity, and the similar physicochemical properties of C2H2 and CO2 mean that most sorbents are poorly selective. Hybrid ultramicroporous materials (HUMs) are candidates for gas separations as they exhibit benchmark selectivity for several key gas pairs. Unfortunately, existing HUMs are handicapped by low capacity. We report a new HUM, SIFSIX-21-Ni, that addresses the trade-off between selectivity and capacity that has plagued sorbents, as its high uptake and high selectivity renders it the new benchmark for C2H2/CO2 separation performance., A new family of six isostructural hybrid ultramicroporous materials that enabled high adsorption capacity as well as high experimental separation selectivity values for C2H2/CO2 separation.

Water splitting will become important to store excess renewable electrical energy into hydrogen. Although the oxygen-evolution reaction (OER) by water oxidation is a critical reaction for water splitting, further investigations are needed to find the details of the OER mechanism for various electrocatalysts. More in particular for homogeneous electrocatalysts, the Randles-Sevcik equation has been extensively applied to determine the turnover frequency (TOF). Herein, using vitamin B12 as a case study, we show that the dynamical deposition/dissolution of the heterogeneous catalyst during OER makes the Randles-Sevcik equation too complicated to be used for calculating the TOF. Indeed, the conventionally applied post-characterization methods do not provide sufficient accuracy to prove the homogeneity of OER mechanisms; thus, using the Randles-Sevcik equation to calculate the TOF is not necessarily correct.

Unlike most gases, acetylene storage is a challenge because of its inherent pressure sensitivity. Herein, a square lattice (sql) coordination network [Cu(4,4′-bipyridine)2(BF4)2]n (sql-1-Cu-BF4) is investigated with respect to its C2H2 sorption behavior from 189 to 298 K. The C2H2 sorption studies revealed that sql-1-Cu-BF4 exhibits multistep isotherms that are temperature-dependent and consistent with the transformation from “closed” (nonporous) to four “open” (porous) phases induced by the C2H2 uptake. The Clausius–Clapeyron equation was used to calculate the performance of sql-1-Cu-BF4 for C2H2 storage at pressures >1 bar, which revealed that its volumetric working capacity at 288 K is slightly superior to acetone (174 vs 170 cm3 cm–3) over a safer pressure range (1–3.5 vs 1–15 bar). Molecular simulations provided insights into the observed switching phenomena, revealing that the layer expansion of sql-1-Cu-BF4 occurs via intercalation and inclusion of C2H2. These results indicate that switching adsorbent layered materials offer promise for utility in the context of C2H2 storage and delivery.

Photocatalytic H2 generation by water splitting is a promising alternative for producing renewable fuels. This work synthesized a new type of Ta2O5/SrZrO3 heterostructure with Ru and Cu (RuO2/CuxO/Ta2O5/SrZrO3) using solid-state chemistry methods to achieve a high H2 production of 5164 μmol g−1 h−1 under simulated solar light, 39 times higher than that produced using SrZrO3. The heterostructure performance is compared with other Ta2O5/SrZrO3 heterostructure compositions loaded with RuO2, CuxO, or Pt. CuxO is used to showcase the usage of less costly cocatalysts to produce H2. The photocatalytic activity toward H2 by the RuO2/CuxO/Ta2O5/SrZrO3 heterostructure remains the highest, followed by RuO2/Ta2O5/SrZrO3 > CuxO/ Ta2O5/SrZrO3 > Pt/Ta2O5/SrZrO3 > Ta2O5/SrZrO3 > SrZrO3. Band gap tunability and high optical absorbance in the visible region are more prominent for the heterostructures containing cocatalysts (RuO2 or CuxO) and are even higher for the binary catalyst (RuO2/CuxO). The presence of the binary catalyst is observed to impact the charge carrier transport in Ta2O5/SrZrO3, improving the solar to hydrogen conversion efficiency.The results represent a valuable contribution to the design of SrZrO3-based heterostructures for photocatalytic H2 production by solar water splitting.

Photocatalytic H

Herein, we investigate the oxygen-evolution reaction (OER) and electrochemistry of a Pd foil in the presence of iron under alkaline conditions (pH ≈ 13). As a source of iron, K2FeO4 is employed, which is soluble under alkaline conditions in contrast to many other Fe salts. Immediately after reacting with the Pd foil, [FeO4]2- causes a significant increase in OER and changes in the electrochemistry of Pd. In the absence of this Fe source and under OER, Pd(IV) is stable, and hole accumulation occurs, while in the presence of Fe this accumulation of stored charges can be used for OER. A Density Functional Theory (DFT) based thermodynamic model suggests an oxygen bridge vacancy as an active site on the surface of PdO2 and an OER overpotential of 0.42 V. A substitution of Pd with Fe at this active site reduces the calculated OER overpotential to 0.35 V. The 70 mV decrease in overpotential is in good agreement with the experimentally measured decrease of 60 mV in the onset potential. In the presence of small amounts of Fe salt, our results point toward the Fe doping of PdO2 rather than extra framework FeOx (Fe(OH)3, FeO(OH), and KFeO2) species on top of PdO2 as the active OER sites.

Syntheses of transition-metal dichalcogenides (TMDs) using colloidal-chemistry approaches are gaining significant interest in recent years, as these methods enable the morphology and properties of the nanocrystals to be tuned for targeted applications. In this work, by only varying the ligand used during synthesis, we synthesized nanoflowers with oleic acid (OA) and 1T' phase dominated WSe2 nanosheets with oleylamine (OLA). WSe2 nanocrystals show slower rate of formation for the metastable 1T' phase. Surface chemistry analyses of the synthesized nanocrystals by solution NMR establish that neither of the ligands bind strongly to the surface of nanocrystals but are in a dynamic coordination with the WSe2 surface. A further examination of the coordination of tungsten hexacarbonyl (W(CO)(6)) with the respective ligands confirms that W(CO)(6) decomposes in OA, losing its octahedral symmetry, which leads to fast reactivity in the flask. In contrast to this, W(CO)(6) reacts with OLA to form a new complex, which leads to slower reactivity and crystallization of the synthesized nanocrystals in the octahedral 1T' phase. These insights into the influence of precursor-ligand chemistry on reaction outcome and the peculiar surface chemistry of colloidal TMD nanocrystals will be instrumental in developing future colloidal TMD nanocrystals.

The sluggish kinetics of the oxygen evolution reaction (OER) at the anode severely limit hydrogen production at the cathode in water splitting systems. Although electrocatalytic systems based on cheap and earth-abundant copper catalysts have shown promise for water oxidation under basic conditions, only very few examples with high overpotential can be operated under acidic or neutral conditions, even though hydrogen evolution in the latter case is much easier. This work presents an efficient and robust Cu-based molecular catalyst, which self-assembles as a periodic film from its precursors under aqueous conditions on the surface of a glassy carbon electrode. This film catalyzes the OER under neutral conditions with impressively low overpotential. In controlled potential electrolysis, a stable catalytic current of 1.0 mA cm-2 can be achieved at only 2.0 V (vs. RHE) and no significant decrease in the catalytic current is observed even after prolonged bulk electrolysis. The catalyst displays first-order kinetics and a single site mechanism for water oxidation with a TOF (kcat ) of 0.6 s-1 . DFT calculations on of the periodic Cu(TCA)2 (HTCA=1-mesityl-1H-1,2,3-triazole-4-carboxylic acid) film reveal that TCA defects within the film create CuI active sites that provide a low overpotential route for OER, which involves CuI , CuII -OH, CuIII =O and CuII -OOH intermediates and is enabled at a potential of 1.54 V (vs. RHE), requiring an overpotential of 0.31 V. This corresponds well with an overpotential of approximately 0.29 V obtained experimentally for the grown catalytic film after 100 CV cycles at pH 6. However, to reach a higher current density of 1 mA cm-2 , an overpotential of 0.72 V is required.

For anion exchange membrane (AEM) electrolysis, challenges include finding an optimal catalyst for hydrogen evolution reaction (HER), as the noble metals are scarce while non-noble metals are inferior. Here, the noble metal amount is reduced in a straightforward solution synthesis which produces Pt-Ru surface nanoparticles and unique intratube nanowires decorated on single walled carbon nanotubes (SWNT). In half-cell tests, 5 wt PtRu-% Pt-Ru SWNT demonstrates stable 10 mA cm −2 HER current at 46 mV overpotential and outperforms commercial electrocatalysts. When integrated in an AEM electrolyser, a high current density of 500 mA cm −2 at a low voltage of 1.72 V is achieved with 34 µg cm −2 metal loading. First-principles calculations reveal that both the Pt-Ru alloy nanoparticle and intratube nanowires promote near optimal H* binding energy, thereby releasing the H 2 faster. Thus, our approach yields an active low metal loading alkaline HER catalyst without sacrificing the performance in an AEM electrolyser.

Hybrid ultramicroporous materials, HUMs, are comprised of metal cations linked by combinations of inorganic and organic ligands. Their modular nature makes them amenable to crystal engineering studies, which have thus far afforded four HUM platforms (as classified by the inorganic linkers). HUMs are of practical interest because of their benchmark gas separation performance for several industrial gas mixtures. We report herein design and gram-scale synthesis of the prototypal sulfate-linked HUM, the fsc topology coordination network ([Zn(tepb)(SO

The initial oxidation of Fe(100) at 400 degrees C has been studied by X-ray photoelectron spectroscopy (XPS), scanning tunneling microscopy (STM), and low-energy electron diffraction, in combination with density functional theory calculations. The first observed well-ordered surface oxide is formed at a coverage of similar to 3 oxygen atoms per unreconstructed surface Fe(100) atom. STM shows that this surface oxide is terminated by straight atomic rows exhibiting a p(2 X 1) periodicity. However, already for oxide films with a coverage of similar to 4 oxygen atoms (corresponding to one Fe3O4 unit cell thickness), wiggly atomic rows appear similar to the c(2 X 2) reconstructed Fe3O4 (100)-surface with the Fe3O4 unit vectors rotated 45 degrees to Fe(100). The wiggly rows are a consequence of subsurface cation iron vacancies, which previously have been observed for bulk surfaces. The formation of subsurface vacancies is supported by the XPS O is signature, which is modeled by considering the core-level shifts for all oxygen atoms in the film. Throughout the oxidation series, the microscopy results reveal a layer-by-layer (Frank-van der Merwe) growth.

Density functional theory calculations are used to investigate CO adsorption, dissociation and SnOX formation on Pt3Sn. We find that direct CO dissociation is prevented by high activation energies. An energetically feasible path is instead CO dimer formation followed by C–O bond cleavage. Dimers are formed in the presence of Sn adatoms which effectively stabilize anionic OCCO− species. The presence of Sn adatoms is crucial as dimers are unstable on Pt-only systems. The proposed mechanism may explain recent experimental observations of SnOX and C–C formation as PtxSn is exposed to CO.

peer-reviewed The development of cheap and robust heterogeneous catalysts for the Meerwein-Ponndorf-Verley (MPV) reduction is desirable due to the difficulties in product isolation and catalyst recovery associated with the traditional use of homogeneous catalysts for MPV. Herein, we show that microwave heated γ-Al2O3 can be used for the reduction of aldehydes to alcohols. The reaction is efficient and has a broad substrates scope (19 entries). The products can be isolated by simple filtration, and the catalyst can be regenerated. With the use of microwave heating, we can direct the heating to the catalyst rather than to the whole reaction medium. Furthermore, DFT was used to study the reaction mechanism, and we can conclude that a dual-site mechanism is operative where the aldehyde and 2-propoxide are situated on two adjacent Al sites during the reduction. Additionally, volcano plots were used to rationalize the reactivity of Al2O3 in comparison to other metal oxides.

peer-reviewed C2H2/CO2 separation is an industrially important process that remains challenging because of the similar physicochemical properties of C2H2 and CO2. We herein report that the new square lattice (sql) coordination network [Cu (bipy‐xylene)2(NO3)2]n, sql‐16‐Cu‐NO3, 16 = bipy‐xylene = 4,4′‐(2,5‐dimethyl‐ 1,4‐phenylene)dipyridine, exists in at least three forms, as‐synthesised (α), activated (α′) and hydrated (β). The activated phase, sql‐16‐Cu‐NO3‐α′, is an ultra microporous material that exhibits high selectivity towards C2H2 over CO2 as revealed by dynamic gas breakthrough experiments (1:1, C2H2/CO2) that afforded 99.87% pure CO2 in the effluent stream. The separation selectivity at 298 K and 1 bar, 78, is the third best value yet reported for C2H2 selective physisorbents whereas the mid‐loading performance sets a new benchmark. The performance of sql‐16‐Cu‐NO3‐α′ is attributed to a new type of C2H2 binding site in which CH···ONO2 interactions enable moderately strong sorbent‐sorbate binding (Qst (C2H2) = 38.6 kJ/mol) at low loading. Conversely, weak CO2 binding (Qst (CO2) = 25.6 kJ/mol) at low loading means that (ΔQst)AC [Qst (C2H2)–Qst (CO2)] is 13 kJ/mol at low coverage and 11.4 kJ/mol at mid‐loading. Analysis of in situ powder X‐ray diffraction and modelling experiments provide insight into the sorption properties and high C2H2/CO2 separation performance of sql‐16‐Cu‐NO3‐α′.

Closed-to-open structural transformations in flexible coordination networks are of potential utility in gas storage and separation. Herein, we report the first example of a flexible SiF(6)(2−)-pillared square grid material, [Cu(SiF(6))(L)(2)](n) (L = 1,4-bis(1-imidazolyl)benzene), SIFSIX-23-Cu. SIFSIX-23-Cu exhibits reversible switching between nonporous (β1) and several porous (α, γ1, γ2, and γ3) phases triggered by exposure to N(2), CO(2), or H(2)O. In addition, heating β1 to 433 K resulted in irreversible transformation to a closed polymorph, β2. Single-crystal X-ray diffraction studies revealed that the phase transformations are enabled by rotation and geometrical contortion of L. Density functional theory calculations indicated that L exhibits a low barrier to rotation (as low as 8 kJmol(−1)) and a rather flat energy surface. In situ neutron powder diffraction studies provided further insight into these sorbate-induced phase changes. SIFSIX-23-Cu combines stability in water for over a year, high CO(2) uptake (ca. 216 cm(3)/g at 195 K), and good thermal stability.

Ambient-pressure operando soft X-ray absorption spectroscopy (soft-XAS) was applied to study the reactivity of hydroxylated SnO2 nanoparticles toward reducing gases. H2 was first used as a test case, showing that the gas phase and surface states can be simultaneously probed: Soft-XAS at the O K-edge gains sensitivity toward the gas phase, while at the Sn M4,5-edges, tin surface states are explicitly probed. Results obtained by flowing hydrocarbons (CH4 and CH3CHCH2) unequivocally show that these gases react with surface hydroxyl groups to produce water without producing carbon oxides and release electrons that localize on Sn to eventually form SnO. The partially reduced SnO2 – x layer at the surface of SnO2 is readily reoxidized to SnO2 by treating the sample with O2 at mild temperatures (>200 °C), revealing the nature of “electron sponge” of tin oxide. The experiments, combined with DFT calculations, allowed devising of a mechanism for dissociative hydrocarbon adsorption on SnO2, involving direct reduction of Sn sites at the surface via cleavage of C–H bonds and the formation of methoxy- and/or methyl-tin species at the surface.

Ambient pressure operando soft X-ray absorption spectroscopy (soft-XAS) was applied to study the reactivity of hydroxylated SnO2 nanoparticles towards reducing gases. H2 was first used as a test case, showing that gas phase and surface states can be simultaneously probed: soft-XAS at the O K-edge gains sensitivity towards the gas phase, while at the Sn M4,-edges tin surface states are explicitly probed. Results obtained by flowing hydrocarbons (CH4 and CH3CHCH2) unequivocally show that these gases react with surface hydroxyl groups to produce water without producing carbon oxides, and release electrons that localize on Sn to eventually form SnO. The partially reduced SnO2-x layer at the surface of SnO2 is readily reoxidised to SnO2 by treating the sample with O2 at mild temperatures (> 200 °C), revealing the nature of “electron sponge” of tin oxide. The experiments, combined with DFT calculations, allowed hypothesizing a mechanism for dissociative hydrocarbon adsorption on SnO2, involving direct reduction of Sn sites at the surface via cleavage of C-H bonds, and the formation of methoxy- and/or methyl-tin species at the surface.

peer-reviewed The full text of this article will not be available in ULIR until the 29/07/2021 The oxygen evolution reaction (OER) is the limiting factor in an electrolyzer and the oxygen reduction reaction (ORR) the limiting factor in a fuel cell. In OER, water is converted to O2 and H+/e- pairs, while in ORR the reverse process happens to form water. Both reactions and their efficiency are important enablers of a hydrogen economy where hydrogen will act as a fuel or energy storage medium. OER and ORR can both be described assuming a 4-step electrochemical mechanism with coupled H+/e- transfers between 4 intermediates (M-*, M-OH, M=O, M-OOH, M = active site). Previously, it was shown that an unstable M-OOH species can equilibrate to an MOO species and a hydrogenated acceptor site (M-OOH/eq), enabling a bifunctional mechanism. Within OER, the presence of Fe within an NiOOH acceptor site was found to be beneficial to lower the required overpotential (Vandichel et al. Chemcatchem, 2020, 12 (5), 1436-1442). In this work, we present the first proof-of-concept study of various possible mechanisms (standard and bifunctional ones) for OER and ORR, i.e. we include now the active edge sites and hydrogen acceptor sites in the same model system. Furthermore, we consider water as solvent to describe the equilibration of the M-OOH species to M-OOH/eq, a crucial step that enables a bifunctional route to be operative. Additionally, different single Fe-dopant positions in an exfoliated NiOOH model are considered and four different reaction schemes are studied for OER and the reverse ORR process. The results are relevant in alkaline conditions, where the studied model systems are stable. Certain Fe-dopant positions result in active Ni-edge sites with very low overpotentials provided water is present within the model system.

Segregation induced formation of oxide/metal interfaces can significantly influence the catalytic activity of alloy nanoparticles. One example is Pt3Sn nanoparticles, which are known to segregate into SnOX and an Sn deficient alloy phase during typical operating conditions for CO oxidation. Here, we use density functional theory calculations to investigate CO oxidation over Pt3Sn(111) supported SnO2 and (SnO2)3, representing the initial state of segregation. The results are compared to CO oxidation at an interface between bulk-like SnO2 and Pt3Sn(111). The barrier for CO oxidation via a Mars–van Krevelen mechanism is found to be lower on SnO2 and (SnO2)3 as compared to the bulk-like model. However, the regeneration of the finite systems is associated with higher barriers for O2 dissociation which may become the rate limiting step in the low temperature regime where the metal surface can be assumed to be CO covered.

Metal alloying is commonly used as a design strategy for catalyst optimization. The mechanistic understanding of this class of systems is, however, obscured by reaction induced segregation phenomena. Herein the case of CO oxidation over Pt3Sn is investigated using Density Functional Theory calculations combined with ab initio thermodynamics and first-principles based micro-kinetic modeling. It is found that Pt3Sn under typical operating conditions segregates into SnOX and an Sn deficient metal phase. The segregation is driven both by the stability of the metal oxide and the strong bonding of CO to Pt. The catalytic consequences of a metal supported SnO2 phase are explored by comparing CO oxidation at an SnOX/Pt interface with oxidation over Pt and Pt/Pt3Sn skin models. The reaction is found to proceed with lower barriers at the interface as compared to the metal-only systems. The co-catalytic role of the SnOX rim is manifested in high low temperature activity. The present work highlights effects of reacti...

The direct interaction between CO2 and terminal alkynes in the presence of bis-(NHC)-metal catalysts at ambient conditions was studied. Two Cu and Ag-based bis-N-heterocyclic carbene Transition Metal catalysts were synthesized. The (NHC)2-Ag complex showed a better catalytic performance towards the carboxylation of terminal alkynes in comparison with the copper analogue even for the conversion of acetylene gas. The optimized conditions for the carboxylation are: the use of Cs2CO3 as additive, one atmosphere CO2 and room temperature using 1% mol catalyst. Mechanistic insight into the reaction mechanism is obtained by means of state-of-the-art first principles calculations.

peer-reviewed The full text of this article will not be available in ULIR until the embargo expires on the 30/11/2020 Oxygen evolution (OER) via mixed metal oxy hydroxides [M(O)(OH)] may take place on a large variety of possible active sites on the actual catalyst. A single site computational description assumes a 4-step electrochemical mechanism with coupled H+/e- transfers between 4 intermediates (M-*, M-OH, M=O, M-OOH). We also consider bifunctional routes, in which an unstable M-OOH species converts via a proton shuttling pathway to a thermodynamically more favourable bare M-* site, O2 and a hydrogenated acceptor site; the acceptor site takes up the proton forming a hydrogenated acceptor site after recombination with an electron from the catalyst material. Here, we combine pure metal γM(O)(OH) edge sites (M = Fe, Co, Ni) with as proton-acceptor sites different threefold coordinated oxygens on β-(M,M’)(O)(OH) terraces (M,M’ = Fe, Co, Ni). The acceptor sites on these terraces have of a M’2MO motif. Our combinatorial study results in a ranking of their bifunctional OER activity on a 3D-volcano plot. Via various bi- and tri-metallic oxy hydroxide combinations, we show that their excellent experimental OER activity results from bifunctionality and provide a roadmap to construct innovative low overpotential OER catalysts

Water oxidation is traditionally performed over IrO2 and RuO2 owing to their high stability at low pH compared to molecular O2 evolution catalysts. The low stability of molecular complexes in acids limits their industrial exploitation as anodes in water-splitting devices, where high current densities and proton conductivity are required. Herein, an existing Co(1,10-phenanthroline)2 complex film is engineered to improve its pH-stability via extra OH substituents on the ligand, i.e. 1,10-phenanthroline-4,7-diol. This novel Co(1,10-phenanthroline-4,7-diol)2 complex film is active for water oxidation at low overpotentials and stable at low pH. Since the calculated water oxidation overpotentials of both complexes are similar, the difference in water oxidation activity is attributed to a smaller charge transfer resistance, which originates from a different anchoring style to the electrode via the OH groups of the ligand. This result is supported by electrochemical impedance measurements. The high pH-stability of the Co(1,10-phenanthroline-4,7-diol)2 film is computationally rationalized by a high crystal formation energy observed in DFT calculations. In summary, an acid-stable and active cobalt-based metal-organic film is reported that competes well with most reported earth-abundant catalysts for water oxidation under similar conditions.

The epoxidation of cyclohexene has been investigated on a metal-organic framework MIL-47 containing saturated V+IV sites linked with functionalized terephthalate linkers (MIL-47-X, X= OH, F, Cl, Br, CH3, NH2). Experimental catalytic tests have been performed on the MIL-47-X materials to elucidate the effect of linker substitution on the conversion. Notwithstanding the fact that these substituted materials are prone to leaching in the performed catalytic tests, the initial catalytic activity of these materials correlates with the Hammett substituent constants. In general, substituents led to an increased activity relative to the parent MIL-47. To rationalize the experimental findings, first-principles kinetic calculations were performed on periodic models of MIL-47 to determine the most important active sites by creating defect structures in the interior of the crystalline material. In a next step these defect structures were used to propose extended cluster models, which are able to reproduce in an adequate way the direct environment of the active metal site. An alkylperoxo species V+VO-(OOtBu) was identified as the most abundant and therefore the most active epoxidation site. The structure of the most active site was a starting basis for the construction of extended cluster models including substituents. They were used for quantifying the effect of functionalization of the linkers on the catalytic performance of the heterogeneous catalyst MIL-47-X. Electron-withdrawing as well as electron-donating groups have been considered. The epoxidation activity of the functionalized models has been compared with the measured experimental conversion of cyclohexene. The agreement is fairly good. This combined experimental-theoretical study makes it possible to elucidate the structure of the most active site and to quantify the electronic modulating effects of linker substituents on the catalytic activity.

Copper(I)-catalyzed 1,3-dipolar cycloaddition of azides and terminal alkynes (CuAAC), better known as "click" reaction, has triggered the use of 1,2,3-triazoles in bioconjugation, drug discovery, materials science and combinatorial chemistry. Here we report a new series of water-soluble catalysts based on N-heterocyclic carbene (NHC)-Cu complexes which are additionally functionalized with a sulfonate group. The complexes show superior activity towards CuAAC reactions and display a high versatility, enabling the production of triazoles with different substitution patterns. Additionally, successful application of these complexes in bioconjugation using unprotected peptides acting as DNA binding domains was achieved for the first time. Mechanistic insight into the reaction mechanism is obtained by means of state-of-the-art first principles calculations.

A new method has been developed for generating highly dispersed base sites on metal–organic framework (MOF) lattices. The base catalytic activity of two alkaline earth MOFs, M2(BTC)(NO3)(DMF) (M ¼ Ba or Sr, H3BTC ¼ 1,3,5-benzenetricarboxylic acid, DMF ¼ N,N-dimethylformamide) was studied as a function of their activation procedures. The catalytic activity in Knoevenagel condensation and Michael addition reactions was found to increase strongly with activation temperature. Physicochemical characterization using FTIR, 13C CP MAS NMR, PXRD, XPS, TGA-MS, SEM, EPR, N2 physisorption and nitrate content analysis shows that during activation, up to 85% of the nitrate anions are selectively removed from the structure and replaced with other charge compensating anions such as O2_. The defect sites generated via this activation act as new strong basic sites within the catalyst structure. A fluorescence microscopic visualization of the activity convincingly proves that it is exclusively associated with the hexagonal crystals, and that reaction proceeds inside the crystal's interior. Theoretical analysis of the Ba-material shows that the basicity of the proposed Ba2+–O2_–Ba2+ motifs is close to that of the edge sites in BaO. crosscheck: This document is CrossCheck deposited related_data: Supplementary Information copyright_licence: The Royal Society of Chemistry has an exclusive publication licence for this journal copyright_licence: The accepted version of this article will be made freely available after a 12 month embargo period history: Received 11 June 2014; Accepted 25 July 2014; Accepted Manuscript published 25 July 2014; Advance Article published 13 August 2014; Version of Record published 29 September 2014 ispartof: Chemical Science vol:5 issue:11 pages:4517-4524 status: published

This perspective review paper describes the V-containing metal–organic frameworks that have been developed since the first systematic reports on MOFs almost 15 years ago. These hybrid crystalline materials, containing V(III) or V(IV) as metal nodes, show interesting behavior in oxidation catalysis and gas sorption. A significant amount of papers has appeared on the use of these structures in gas (hydrocarbon, CO2) separation. Promising future research and development of V-MOFs is suggested.

When adsorbing guest molecules, the porous metal-organic framework MIL-53(Cr) may vary its cell parameters drastically while retaining its crystallinity. A first approach to the thermodynamic analysis of this "framework breathing" consists of comparing the osmotic potential in two distinct shapes only (large-pore and narrow-pore). In this paper, we propose a generic parametrized free energy model including three contributions: host free energy, guest-guest interactions, and host-guest interaction. Free energy landscapes may now be constructed scanning all shapes and any adsorbed amount of guest molecules. This allows us to determine which shapes are the most stable states for arbitrary combinations of experimental control parameters, such as the adsorbing gas chemical potential, the external pressure, and the temperature. The new model correctly reproduces the structural transitions along the CO2 and CH4 isotherms. Moreover, our model successfully explains the adsorption versus desorption hysteresis as a consequence of the creation, stabilization, destabilization, and disappearance of a second free energy minimum under the assumptions of a first-order phase transition and collective behavior. Our general thermodynamic description allows us to decouple the gas chemical potential μ and mechanical pressure P as two independent thermodynamic variables and predict the complete (μ, P) phase diagram for CO2 adsorption in MIL-53(Cr). The free energy model proposed here is an important step toward a general thermodynamics description of flexible metal-organic frameworks. © 2013 American Chemical Society.

A vanadium based metal-organic framework (MOF), VO(BPDC) (BPDC(2-) = biphenyl-4,4'-dicarboxylate), adopting an expanded MIL-47 structure type, has been synthesized via solvothermal and microwave methods. Its structural and gas/vapor sorption properties have been studied. This compound displays a distinct breathing effect toward certain adsorptives at workable temperatures. The sorption isotherms of CO(2) and CH(4) indicate a different sorption behavior at specific temperatures. In situ synchrotron X-ray powder diffraction measurements and molecular simulations have been utilized to characterize the structural transition. The experimental measurements clearly suggest the existence of both narrow pore and large pore forms. A free energy profile along the pore angle was computationally determined for the empty host framework. Apart from a regular large pore and a regular narrow pore form, an overstretched narrow pore form has also been found. Additionally, a variety of spectroscopic techniques combined with N(2) adsorption/desorption isotherms measured at 77 K demonstrate that the existence of the mixed oxidation states V(III)/V(IV) in the titled MOF structure compared to pure V(IV) increases the difficulty in triggering the flexibility of the framework.

Water splitting is the key step towards artificial photosystems for solar energy conversion and storage in the form of chemical bonding. The oxidation of water is the bottle-neck of this process that hampers its practical utility; hence, efficient, robust, and easy to make catalytic systems based on cheap and earth-abundant materials are of exceptional importance. Herein, an in situ generated cobalt catalyst, [Co-II(TCA)(2)(H2O)(2)] (TCA=1-mesityl-1,2,3-1H-triazole-4-carboxylate), that efficiently conducts photochemical water oxidation under near-neutral conditions is presented. The catalyst showed high stability under photolytic conditions for more than 3 h of photoirradiation. During electrochemical water oxidation, the catalytic system assembled a catalyst film, which proved not to be cobalt oxide/hydroxide as normally expected, but instead, and for the first time, generated a molecular cobalt complex that incorporated the organic ligand bound to cobalt ions. The catalyst film exhibited a low overpotential for electrocatalytic water oxidation (360 mV) and high oxygen evolution peak current densities of 9 and 2.7 mA cm(-2) on glassy carbon and indium-doped tin oxide electrodes, respectively, at only 1.49 and 1.39 V ( versus a normal hydrogen electrode), respectively, under neutral conditions. This finding, exemplified on the in situ generated cobalt complex, might be applicable to other molecular systems and suggests that the formation of a catalytic film in electrochemical water oxidation experiments is not always an indication of catalyst decomposition and the formation of nanoparticles.

Nanoscale Zr-based metal organic frameworks (MOFs) UiO-66 and UiO-67 were studied as potential anticancer drug delivery vehicles. Two model drugs were used, hydrophobic paclitaxel and hydrophilic cisplatin, and were adsorbed onto/into the nano MOFs (NMOFs). The drug loaded MOFs were further encapsulated inside a modified poly(ε-caprolactone) with d-α-tocopheryl polyethylene glycol succinate polymeric matrix, in the form of microparticles, in order to prepare sustained release formulations and to reduce the drug toxicity. The drugs physical state and release rate was studied at 37 °C using Simulated Body Fluid. It was found that the drug release depends on the interaction between the MOFs and the drugs while the controlled release rates can be attributed to the microencapsulated formulations. The in vitro antitumor activity was assessed using HSC-3 (human oral squamous carcinoma; head and neck) and U-87 MG (human glioblastoma grade IV; astrocytoma) cancer cells. Cytotoxicity studies for both cell lines showed that the polymer coated, drug loaded MOFs exhibited better anticancer activity compared to free paclitaxel and cisplatin solutions at different concentrations.

This article provides a comprehensive review of the nature of catalytic sites in MOFs. In the last decade, a number of striking studies have reported outstanding catalytic activities of MOFs. In all cases, the authors were intrigued as it was unexpected from the ideal structure. We demonstrate here that (surface) defects are at the origin of the catalytic activities for the reported examples. The vacancy of ligands or linkers systematically generates (surface) terminations which can possibly show Lewis and/or Bronsted acido-basic features. The engineering of catalytic sites at the nodes by the creation of defects (on purpose) appears today as a rational approach for the design of active MOFs. Similarly to zeolite post-treatments, post-modifications of MOFs by linker or metal cation exchange appear to be methods of choice. Despite the mild acidity of defective MOFs, we can account for very active MOFs in a number of catalytic applications which show higher performances than zeolites or benchmark catalysts.

The UiO-66 metal organic framework is one of the most thermally and chemically stable hybrid materials reported to date. However, it is also accepted that the material contains structurally embedded defects, which may be engineered to enhance properties towards specific applications such as catalysis, sensing, etc. The synthesis conditions determine to a large extent the level of perfection of the material and additionally the catalytic activity may be enhanced by post-synthesis activation at high temperature under vacuum, in which defect coordinating species (H2O, HCl, monocarboxylic modulators, etc.) evaporate. The molecular level characterization of defects is extremely challenging from both theoretical and experimental points of view. Such experimental endeavor was recently proposed via experimental SXRD measurements, also unraveling the coordination of water on the Zr–O–Zr defect sites [Angew. Chem., Int. Ed., 2015, 54, 11162–11167]. The present work provides a theoretical understanding of defect structures in UiO-66(Zr) by means of periodic density functional theory calculations and ab initio molecular dynamics simulations. A range of defect structures are generated with different numbers of missing linkers. For each of the defects, the free energetic and mechanical stability is discussed and the coordination of water and charge balancing hydroxide ions is studied. For catalysis applications, the material is mostly pretreated to remove water by dehydration reactions. For each of the proposed defect structures, mechanistic pathways for dehydration reactions of the Zr-bricks are determined employing nudged elastic band (NEB) calculations. During the dehydroxylation trajectory, loose hydroxyl groups and terephthalate decoordinations are observed. Furthermore, dehydration reactions are lower activated if terephthalate linkers are missing in the immediate environment of the inorganic brick. The creation of defects and the dehydration processes have a large impact on the mechanical properties of the material, which is evidenced by lower bulk moduli and elastic constants for structures with more defects.

Functionalized linkers can greatly increase the activity of metal-organic framework (MOF) catalysts with coordinatively unsaturated sites. A clear linear free-energy relationship (LFER) was found between Hammett σ(m) values of the linker substituents X and the rate k(X) of a carbonyl-ene reaction. This is the first LFER ever observed for MOF catalysts. A 56-fold increase in rate was found when the substituent is a nitro group.

Since many industrially important processes start with the adsorption of guest molecules inside the pores of an acidic zeolite catalyst, a proper estimate of the adsorption enthalpy is of paramount importance. In this contribution, we report ab initio calculations on the adsorption of water, alcohols, and nitriles at the bridging Bronsted sites of H-ZSM-5, using both cluster and periodic models to account for the zeolite environment. Stabilization of the adsorption complexes results from hydrogen bonding between the guest molecule and the framework, as well as from embedding, i.e., van der Waals interactions with the pore walls. Large-cluster calculations with different DFT methods, in particular B3LYP(-D), PBE(-D), M062X(-D), and omega B97X-D, are tested for their ability to reproduce the experimental heats of adsorption available in the literature (J. Phys. Chem. B 1997, 101, 3811-3817). A proper account of dispersion interactions is found to be crucial to describe the experimental trend across a series of adsorbates of increasing size, i.e., an increase in adsorption enthalpy by 10-15 kJ/mol for each additional carbon atom. The extended-cluster model is shown to offer an attractive alternative to periodic simulations on the entire H-ZSM-5 unit cell, resulting in virtually identical final adsorption enthalpies. Comparing calculated stretch frequencies of the zeolite acid sites and the adsorbate functional groups with experimental IR data additionally confirms that the cluster approach provides an appropriate representation of the adsorption complexes.

The formation of cyclic hydrocarbons from smaller building blocks such as ethene and propene is investigated in protonated ZSM-5, using a 2-layered ONIOM(B3LYP/6-31+g(d):HF/6-31+g(d)) approach and an additional Grimme-type van der Waals dispersion correction term to account for the long-range dispersion interactions. These cyclic species form precursors for active hydrocarbon pool species and play a key role in activating the acidic zeolite host for successful methanol-to-olefin (MTO) conversion. Starting from trace amounts of ethene and propene that are formed during an initial induction period or during the active phase, dimerization reactions allow for rapid chain growth. The products of these reactions can be neutral alkenes, framework-bound alkoxide species or intermediate carbenium ions, depending on the zeolite environment taken into account. On the basis of rate constants for successive reaction steps, a viable route toward cyclization is proposed, which starts from the formation of a framework-bound propoxide from propene, followed by dimerization with an additional propene molecule to form the 2-hexyl carbenium ion which finally undergoes ring closure to yield methylcyclopentane. This cyclic species in turn forms a precursor for either an active hydrocarbon pool compound or for deactivating coke deposit.

Methylation reactions of naphthalenic species over the acidic microporous zeolite with chabazite topology have been investigated by means of two-layered ab initio computations. Large cluster results combined with van der Waals contributions provide thermodynamic and kinetic results of successive methylation steps. The growth of fused bicyclic species is important as these can act as hydrocarbon pool species within the methanol-to-olefin (MTO) process, but ultimately leads to the deactivation of the catalyst. The influence of the confined space of the zeolite pore on the resulting transition state or product shape selectivity is investigated in detail.