Search

A simple and inexpensive MEKC method, which is able to assess base damage within DNA samples, is illustrated. After heat-acid hydrolysis of the DNA samples, both the percentage of each canonical DNA base and the relative amount of un-canonical DNA bases can be measured. This method is useful for an evaluation of the integrity of PCR-templates used in several fields of investigation

The role of DNA damage in PCR processivity/fidelity is a relevant topic in molecular investigation of aged/forensic samples. In order to reproduce one of the most common lesions occurring in postmortem tissues, a new protocol based on aqueous hydrolysis of the DNA was developed in vitro. Twenty-five forensic laboratories were then provided with 3.0 μg of a trial sample (TS) exhibiting, in mean, the loss of 1 base of 20, and a molecular weight below 300 bp. Each participating laboratory could freely choose any combination of methods, leading to the quantification and to the definition of the STR profile of the TS, through the documentation of each step of the analytical approaches selected. The results of the TS quantification by qPCR showed significant differences in the amount of DNA recorded by the participating laboratories using different commercial kits. These data show that only DNA quantification "relative" to the used kit (probe) is possible, being the "absolute" amount of DNA inversely related to the length of the target region (r(2) = 0.891). In addition, our results indicate that the absence of a shared stable and certified reference quantitative standard is also likely involved. STR profiling was carried out selecting five different commercial kits and amplifying the TS for a total number of 212 multiplex PCRs, thus representing an interesting overview of the different analytical protocols used by the participating laboratories. Nine laboratories decided to characterize the TS using a single kit, with a number of amplifications varying from 2 to 12, obtaining only partial STR profiles. Most of the participants determined partial or full profiles using a combination of two or more kits, and a number of amplifications varying from 2 to 27. The performance of each laboratory was described in terms of number of correctly characterized loci, dropped-out markers, unreliable genotypes, and incorrect results. The incidence of unreliable and incorrect genotypes was found to be higher for participants carrying out a limited number of amplifications, insufficient to define the correct genotypes from damaged DNA samples such as the TS. Finally, from a dataset containing about 4500 amplicons, the frequency of PCR artifacts (allele dropout, allele drop-in, and allelic imbalance) was calculated for each kit showing that the new chemistry of the kits is not able to overcome the concern of template-related factors. The results of this collaborative exercise emphasize the advantages of using a standardized degraded DNA sample in the definition of which analytical parameters are critical for the outcome of the STR profiles.

The long-term survival of RNA in postmortem tissues is a tricky topic. Many aged/forensic specimens show, in fact, high rates of null/inconclusive PCR-based results, while reliable outcomes were sometimes achieved from archaeological samples. On the other hand, several data show that the RNA is a molecule that survives even to several physical-chemical stresses. In the present study, a simple protocol, which was already developed for the prolonged hydrolysis of DNA, was applied to a RNA sample extracted from blood. This protocol is based on the heat-mediated (70°C) hydrolysis for up to 36 h using ultrapure water and di-ethyl-pyro-carbonate-water as hydrolysis medium. Measurable levels of depurination were not found even if microfluidic devices showed a progressive pattern of degradation. The reverse transcription/quantitative PCR analysis of two (60 bp long) housekeeping targets (glyceraldehyde-3-phosphate dehydrogenase and porphobilinogen deaminase) showed that the percentage of amplifiable target (%AT) decreased in relation to the duration of the damaging treatment (r2 > 0.973). The comparison of the %AT in the degraded RNA and in the DNA samples that underwent the same damaging treatment showed that the %AT is always higher in RNA, reaching up to three orders of magnitude. Lastly, even the end-point PCR of blood-specific markers gave reliable results, which is in agreement with the body fluid origin of the sample. In conclusion, all the PCR-based results show that RNA maintains the ability to be retro-transcribed in short cDNA fragments even after 36 h of incubation at 70°C in mildly acidic buffers. It is therefore likely that the long-term survival of RNA samples depends mainly on the protection against RNAase attacks rather than on environmental factors (such as humidity and acidity) that are instead of great importance for the stability of DNA. As a final remark, our results suggest that the RNA analysis can be successfully performed even when DNA profiling failed.

This work provides a protocol for the in vitro production of damaged DNA samples. In particular, heat-mediated hydrolysis of the samples at 70 °C in ultrapure water was performed in 1.7 mL Eppendorf tubes sealed by Parafilm for 0–36 h. The chemical/physical features of the resulting samples are described. After normalization of the qPCR data, these were compared with those obtained from samples treated for 0–10 h in a previous study. Keywords: qPCR, Degraded samples, DNA quantification, DNA hydrolysis

Heat-mediated hydrolysis of DNA is a simple and inexpensive method for producing damaged samples in vitro. Despite heat-mediated DNA hydrolysis is being widely used in forensic and clinical validation procedures, the lack of standardized procedures makes it impossible to compare the intra and inter-laboratory outcomes of the damaging treatments. In this work, a systematic approach to heat induced DNA hydrolysis was performed at 70 °C for 0–18 h to test the role both of the hydrolysis buffer and of the experimental conditions. Specifically, a trial DNA sample, resuspended in three different media (ultrapure water, 0.1% DEPC-water and, respectively, TE) was treated both in Eppendorf tubes (“Protocol P”) and in Eppendorf tubes provided with screwcaps (“Protocol S”). The results of these comparative tests were assessed by normalization of the qPCR results. DEPC-water increased the degradation of the samples up to about 100 times when compared to the ultrapure water. Conversely, the TE protected the DNA from degradation whose level was about 1700 times lower than in samples treated in ultrapure water. Even the employment of the “Protocol S” affected the level of degradation, by consistently increasing it (up to about 180 times in DEPC-water). Thus, this comparative approach showed that even seemingly apparently trivial and often underestimated parameters modify the degradation level up to 2–3 orders of magnitude. The chemical-physical reasons of these findings are discussed together with the role of potential factors such as enhanced reactivity of CO2, ROS, NOx and pressure, which are likely to be involved. Since the intra and inter-laboratory comparison of the outcomes of the hydrolytic procedure is the first step toward its standardization, the normalization of the qPCR data by the UV/qPCR ratio seems to be the simplest and most reliable way to allow this. Finally, the supplying (provided with the commercial qPCR kits) of a DNA sample whose degree of degradation is well documented could be helpful in ISO/IEC 17025 validation procedures and in proficiency testing.

A rapid and reliable protocol was developed to produce chemical degradation of the RNA in vitro. Cell line MDA-MB-453 was used as source of RNA and hydrolysis in water at 70°C was performed. The outcome was monitored by RT-qPCR of two housekeeping targets and a significant correlation between the Ct and the extent of molecular damage of the template was found. A molecular degradation index of the RNA is proposed.

A DNA sample was partially degraded by scalar heat-acid treatments to study the extent of apurinic-apyrimidinic (A-P) lesions produced along the molecule. A CE-UV method allowed us to measure the rate of depurination at pH 5.0 and 70°C which was calculated to be 5.41×10(-6) s(-1) for adenine and 6.27×10(-6) s(-1) for guanine. CE identified depurination on treated samples when it occurred with a loss of >4% of the basic moieties. The molecular features of the A-P enriched samples were investigated by using molecular assays (agarose gel electrophoresis, UV spectrophotometry and quantitative PCR) and the consistency of the results of the STR typing were compared with the degree of depurination of the PCR template. The treated DNA samples showed molecular features such as fragmentation, altered OD(260) /OD(280) ratios and decreased ability of the quantitative PCR to synthesise the human target, related to the severity of depurination. A satisfactory correlation between the degree of damage and the amount of residual PCR-sensitive target sequences was also demonstrated (r(2) =0.9717). The conventional and mini-STR typing of the samples showed that the genetic outcome was influenced by a depurination damage that exceeded 4% when locus drop-outs and artefactual PCR results were evident. As the success of STR typing depends on the integrity of the DNA recovered from the samples, the CE-UV, physical and molecular assays described here are proposed as a set of useful methods in the analysis of certain forensic and clinical samples, for a critical evaluation of the outcome of the genetic testing.

A set of 16 amplifications following a D-optimal experimental design was planned using the most commonly selected kit and sequencer utilized in a collaborative exercise of the ISFG Italian Working Group GeFI on the molecular characterization of a depurinated DNA sample. The data were evaluated using STRvalidator in order to describe the occurrence of PCR artifacts such as peak imbalance and allele/locus drop outs. The aim of the study was to describe the role of the template amount, number of amplification cycles, volume of the PCR reaction in determining the assay sensitivity and the profiling accuracy as measured by peak heights and areas. The results showed that only by selecting an appropriate ratio of template to PCR reaction solution total volume together with an increase in the number of cycles it could be possible to obtain balanced peaks as well as minimal occurrence of other artifacts. These data are useful to model and understand the PCR artifacts occurrence described in the collaborative exercise.

Hereby we describe a pilot study for the rational design and synthesis of a glycoconjugate vaccine against Tuberculosis (TB) by site-specific coupling of well-defined glycans to non-antigenic amino acids in a selected protein carrier. A combination of ESI-MS and LC-MS analytical methods was applied for the systematic characterization of the reactivity of the surface amino acids in the glycosylation reaction with monosaccharides towards 2-iminomethoxyethyl or homobifunctional (4-nitrophenyl ester) linkers, both on the model protein, ribonuclease A (RNase A) and on TB10.4, the simplest antigenic protein isolated from Mycobacterium tuberculosis (MTB). Intact protein analysis was carried out to quantify the glycosylation degree and profile the glycoform composition of all the prepared neo glycoconjugates, while pronase and chymotriptic digests were analyzed to map and rank the reactivity of protein residues. Neo glycopeptides were purified by on-line porous graphitized carbon solid-phase extraction, separated by hydrophilic interaction liquid chromatography and analyzed by electrospray mass spectrometry (ESI-MS(n)). Significantly, different site specificity and glycosylation efficiency were demonstrated for the two linkers, resulting in structurally diverse glycoconjugates. A computational analysis of the amino acids involved in the epitope formation in TB10.4 addressed the choice to 2-iminomethoxyethyl-saccharide activation, that resulted in a more targeted and selective conjugation preserving the protein antigenicity. Additionally, a rational design of experiments lead to the identification of suitable experimental conditions for the preparation of highly pure and homogeneous neo glycoconjugates.

The assessment of the integrity of the DNA primary structure and the identification of canonical and modified bases are useful tools in medical, pharmaceutical, and forensic applications. In this article we report on the first microwave-assisted hydrolyses of deoxyribonucleoside-triphosphates (dNTPs) and human DNA using "Design of Experiments" methodology. We use hydrophilic interaction chromatography (HILIC) and UV detection at 260 nm for the determination of purinic and pyrimidinic bases at levels of 0.5 μM. We use a ZIC-HILIC 150mm × 2.1 mm i.d., 5 μm particle size column and ammonium formate buffers in acetonitrile for gradient separation of the analytes. We then compare the final concentrations of Thymine, Adenine, Cytosine, and Guanine with the nominal amounts of such bases in the dNTPs and DNA submitted to hydrolysis. After optimization of the hydrolysis (11.5 min, 0.15 M aqueous HCl, 150 °C), the method turns out to be suitable for the determination of products released from quantities of human DNA as low as 500 ng with precision (RSD10%) and accuracy (REC 97-104%). These results confirm that the kinetics of the release of the bases depends on their molecular structure and show that the concentration of the substrate plays a relevant role. We conclude with a discussion of the method and a comparison to the methods described in previous studies.

A CE/UV method was developed to separate by a micellar system the four DNA bases and other five purinic-pyrimidinic compounds (5-methyl-cytosine, uracil, xanthyne, hypoxanthyne and 5-bromo-uracil). Selectivity, precision, accuracy and sensitivity were assessed and proved to be suitable for the analysis of the primary structure of DNA. This method was adopted to study 16 aged samples including two Egyptian mummies, formaldehyde-fixed paraffin-embedded tissues and other forensic specimens. Lower relative values of the four canonical unmodified DNA bases (uDNAb) and more complex pherograms were found in the aged samples when compared with the modern controls. The results of the CE analysis, together with those obtained by classical molecular methods (agarose gel electrophoresis, DNase I and RNase A assays, and UV spectrophotometry), were finally evaluated for assessing the reliability of STR typing. Since samples with low uDNAb showed no amplification or unreliable STR profiles, the uDNAb value is discussed as a further quality criterion in the evaluation of the genetic data obtained from aged samples.

A capillary electrophoresis (CE) method was used to study the DNA primary structure of artificially degraded DNA samples and aged/forensic specimens. CE investigated the ratio between the pyrimidinic and the purinic canonical moieties still bound on the DNA backbone and identified the presence of additional compound (i.e. un-canonical DNA bases). The DNA samples were then analysed by using molecular assays such as agarose gel, UV spectrophotometry and qPCR. All these data have been concurrently considered for a critical evaluation of the outcome of the STR typing.