Search

The study reviewed the state of the art of the clinical use of a convergent-neck-designed Prama implant. This implant was introduced approximately 10 years ago and was characterized by a specific and unique convergent neck with a microtextured surface (UTM surface) and Zirconium Titanium (ZirTi) implant body surface. The neck design was developed to adopt the biologically oriented preparation technique (BOPT). A critical analysis of the published clinical studies and an evaluation of the adopted clinical protocols were performed. A total of forty-six articles were eligible to be reviewed. Only sixteen clinical studies reported clinical outcomes on Prama implants, and nine of these were selected having the longest follow-up from different research groups. The clinical follow-up/duration of the studies ranged from 12 months to 6 years. The initially proposed protocols explored neck supracrestal–transmucosal placement and gained interest due to its minimally invasive concept and the ability to proceed without a pre-prosthesis second surgery. The following investigations dedicated attention to the subcrestal or equicrestal implant placement with the conventional flap approach. The clinical studies characterized by the transmucosal exposed neck approach reported high survival rates with a stable bone morphology and reduced bone loss during the follow-up. Further recent implementations included the introduction of different convergent neck heights that need to be evaluated. The use of intraoral scanner technologies and digital workflow resulted in a simpler methodology with control of the marginal crown morphology. The studies support the concept that the hard tissue parameters (such as marginal bone level, MBL) and soft tissue parameters (such as pink esthetic score, PES) were stable or improved during the follow-up. Definitive crowns, designed with low invasiveness for soft tissues, were possible thanks to the morphology of the neck. The clinical studies support the use of the Prama implant with the different neck positions, demonstrating hard tissue preservation and optimal esthetic results in the first years following insertion. However, the current body of evidence is not robust enough to draw definitive conclusions, especially in the long term, and further high-quality research (long-term randomized trials) is required to consolidate these early observations.

Objectives: To evaluate the retreatment efficacy of premixed bioceramic sealer using a reciprocating system, comparing single-cone and carrier-based obturation techniques. Materials and Methods: Twenty-three monoradicular teeth with oval canals were divided into two groups: NeoSealer Flo with single cone (SC) and NeoSealer Flo with Guttafusion (GF). Retreatment was performed using Reciproc Blue (RB) with a crown-down technique. X-ray and CBCT images were taken to measure the remnant areas and volumes. Results: Apical patency was achieved in all the samples. The remnants were mostly distributed in the middle third in the GF group, while an equal distribution in both the middle and apical thirds was observed in the SC group. The GF group had a lower remnant area and volume after RB 50.05, respectively (0.18 ± 0.33 mm2 vs. 0.39 ± 0.80 mm2 and 0.36 ± 0.59 mm3 vs. 0.51 ± 1.16 mm3). The use of RB 50.05 led to an additional reduction in the remnant areas in the SC (14.89%) and GF (69.49%) groups, while in terms of the volume, the reductions were 20.63% and 36.36%. Conclusions: Reciprocating instruments are effective in removing remnants from root canals filled with both single-cone and carrier-based techniques. The blooming effect in CBCT imaging suggests further in vivo studies for validation.

ABSTRACTPeriodontal diseases include a wide range of pathological conditions, damaging the supporting structures of the teeth. Origin and propagation of periodontal disease is believed to be caused by dysbiosis of the commensal oral microbiota. The aim of this study was to evaluate the presence of bacteria in the pulp cavity of teeth with severe periodontal disease with clinically intact external surface. Periodontal (P) and endodontic (E) tissue samples of root canals from six intact teeth of three patients were sampled for analysis of microbial population using Nanopore technology. Streptococcus was the predominant genus in E samples. Porphyromonas (33.4%, p = 0.047), Tannerella (41.7%, p = 0.042), and Treponema (50.0%, p = 0.0064) were significantly more present in P than in E samples. Some samples (E6 and E1) exhibited a remarkable difference in terms of microbial composition, whilst Streptococcus was a common signature in samples E2 to E5, all which were obtained from the same patient. In conclusion, bacteria were identified on both the root surface and the root canal system, thus demonstrating the possibility of bacteria to spread directly from the periodontal pocket to the root canal system even in the absence of crown’s loss of integrity.

Aim: To evaluate the effect of the resin-bonded prosthesis (Maryland bridge) on marginal bone remodeling of implants placed at the tissue level in the posterior region. Methods: Consecutive healthy patients (n = 46) were included in this clinical study. Flapless not-submerged implants were placed with cover screws exposed and positioned approximately 0.5 mm above tissue level. Patients received the implant and a temporary resin-bonded prosthesis (RBP) (n = 22) or only the implant (n = 24). The RBPs were kept in place for 3 months and removed before impressions. The implants received a custom-made abutment and provisional resin crowns followed by definitive cemented metal–ceramic crowns after 2–3 weeks. The marginal bone level (MBL) was evaluated in a single-blind condition on scanned periapical radiographs and assessed mesially and distally (MBL-M/MBL-D). The bone levels of adjacent teeth (CEJ-M/CEJ-D) and the modification of the area between the implant and the mesial/distal teeth (Area-M/Area-D) were measured. All measurements were made at 1, 3 (pre-loading time) and 12 months (post-loading time). Linear regression models were fitted to evaluate the existence of any significant difference. Results: A total of 44 patients (20 Female, 24 Male; Mean age: 53.9 ± 10.3) completed the study. Two patients were excluded for fractured RBP or de-bonding. The drop-out was of 4.3%. After 12 months, all implants were free from complications. No peri-implantitis or mucositis were observed. The RBP group showed the most stable MBL at 12 months (−0.07 ± 0.41), statistically different from the non-RBP group (−0.67 ± 0.52). CEJ-M and CEJ-D were stable in both groups. Conclusion: The proposed approach of the use of RBP creates a more stable marginal bone level around implants placed at the tissue level, resulting in a reliable technique to protect bone tissue from mechanical and occlusal trauma during the healing period and osteointegration.

Dental professionals are exposed to significant unavoidable physical stress, and theoretical ergonomic recommendations for a sitting workplace are inapplicable in many dental activities. Work-related musculoskeletal disorders (WMSDs) represent a serious health problem among dental professionals (prevalence: 64–93%), showing involvement of 34–60% for the low back and 15–25% for the hips. Muscle stress; prolonged sitting; forward bending and twisting of the torso and head; unbalanced working postures with asymmetrical weight on the hips and uneven shoulders; and others are inevitable for dental professionals. Therefore, the approach for the prevention and treatment of WMSDs must be therapeutic and compensatory. This project was conceived to provide a Yoga protocol for dental professionals to prevent or treat WMSDs from a preventive medicine perspective, and it would represent a Yoga-based guideline for the self-cure and prevention of musculoskeletal problems. Methods: Specific Yoga positions (āsana, such as Virāsana, Virabhadrāsana, Garudāsana, Utkatāsana, Trikonāsana, Anuvittāsana, Chakrāsana, Uttanāsana, Pashimottanāsana) have been selected, elaborated on and adapted to be practiced in a dental office using a dental stool or the dental office walls or a dental unit chair. The protocol is specifically devised for dental professionals (dentists, dental hygienists and dental assistants) and targeted for the low back, hips and legs (including knees and ankles). The protocol includes Visranta Karaka Sthiti (supported positions) in sitting (Upavistha Sthiti) and standing (Utthistha Sthiti) positions, twisting/torsions (Parivrtta), flexions/forward bend positions (Pashima) and extensions/arching (Purva) for musculo-articular system decompression and mobilization. Results: Over 60 Yogāsana—specifically ideated for back detensioning and mobilization, lumbar lordosis restoration, trunk side elongation, hip release and leg stretches and decontraction—are shown and described. The paper provides a meticulous description for each position, including the detailed movement, recommendations and mistakes to avoid, and the breathing pattern (breath control) in all the breath-driven movements (āsana in vinyāsa). An exhaustive analysis of posture-related disorders affecting the lower body among dental professionals is reported, including low-back pain, hip pain and disorders, piriformis syndrome and quadratus femoris dysfunction (gluteal pain), iliopsoas syndrome, multifidus disorders, femoroacetabular and ischiofemoral impingement, spinopelvic mobility, lumbopelvic rhythm, impairment syndromes, lower crossed syndrome, leg pain, knee pain and ankle disorders. Conclusions: A detailed guideline of āsana for low-back decompression, hip joint destress, piriformis and gluteal muscle release, lumbar lordosis recovery and a spinopelvic mobility increase has been elaborated on. The designed Yogāsana protocol represents a powerful tool for dental professionals to provide relief to retracted stiff muscles and unbalanced musculoskeletal structures in the lower body.

Background: This pilot prospective study analysed the clinical use of a new bioceramic premixed CaSi-containing sealer in association with a warm carrier-based technique. Methodology: Healthy patients (n = 38) requiring 40 root canal treatments were enrolled. Periapical X-rays were taken preoperatively, after root canal filling and after 1, 6, and 12 months. Two evaluators assessed the Periapical Index (PAI) and the sealer extrusion. The healing rate and survival rate were also evaluated. Barnard test was used to assess the relationship of each potential prognostic factor with periapical index (PAI) at 12-month follow-up. The significance level was set at 0.05. Results: Root canal treatments (n = 38) were analysed at the end-line (12 months). The total drop-out was 5% (two patients; two teeth). A total of 31 teeth (82%) (PAI 1-2) showed complete healing, while 7 (18%) are still healing. Cumulative survival was 100%. Apical extrusion of the sealers was observed in 18 cases (47%). Of these extrusions, nine (50%) resulted radiographically undetectable after 12 months. Conclusions: The study supports the use of premixed CaSi-based bioceramic sealers in association with carrier-based techniques. Periapical extrusion of the sealer and its radiographic modification or disappearance are possible events reported in the first 12 months.

Guttapercha (GP, trans-1,4-polyisoprene) is the most used tooth root filling material, and it must be used with an appropriate cement (typically a polydimethylsiloxane (PDMS)-based sealer) to ensure an adequate canal obturation. This study aimed to assess the bioactivity and dentin remineralization ability of a bioglass containing PDMS commercial endodontic sealer, BG-PDMS (GuttaFlow Bioseal), and to evaluate the possible influence of a GP cone (Roeko GP point) on the mineralization process. To this end, BG-PDMS disks were aged alone or in the presence of a GP cone in Hank’s Balanced Salt Solution (28 d, 37 °C). Dentin remineralization experiments were carried out under the same conditions. Micro-Raman and IR analyses demonstrated that BG-PDMS is bioactive, thanks to the formation of a silica-rich layer with nucleation sites for B-type carbonated apatite deposition. This phase was thicker when BG-PDMS was aged in the presence of GP. The two materials influenced each other because GP, which alone did not show any bioactivity, nucleated a calcium phosphate phase under these conditions. Analogously, dentin remineralization experiments showed that BG-PDMS is able to remineralize dentin, especially in the presence of GP. Under the experimental conditions, GP acted as a templating agent for calcium phosphate deposition.

This study aimed to analyze the morphology of bone graft granules, the presence of granule demineralization, and bone morphology in retrieved human maxillary sinus bone graft biopsies. Healthy patients underwent sinus bone augmentation using lateral access. Two different dimensions of the antrostomy were performed, a 4 mm or 8 mm height. After 6 months, all sites received one implant using a flap technique, crestal positioning, and submerged healing. Implant biopsies were retrieved after 3 months and were histologically processed. The ESEM analysis was performed on the entire portion of the peri-implant bone (up to 750 µm from the implant thread). Three different regions of interest (ROIs) were selected: the coronal, middle, and apical portions of the implant. In these areas, EDX was performed, and calcium (Ca), phosphate (P), nitrogen (N), and their atomic ratios (Ca/P, Ca/N, and P/N) were calculated. Different bone tissue electron-dense areas were detected through grayscale intensity quantification of ESEM images with different organic (N) or inorganic (Ca,P) compositions. A total of 16 biopsies from 16 healthy patients were analyzed. Bone graft granules were mostly detected in the apical ROI. New bone tissue bridges were detected in the apical and middle ROI. These structures, with lower Ca/N and P/N ratios, were connected and enveloped the bone graft granules. Cortical ROI revealed the most mineralized bone tissue. Conclusions: After 9 months, bone graft resorption was only partially completed and new bone tissue appeared less mineralized in the middle and apical ROI than in the coronal ROI.

Background: Recently several calcium silicate flowable sealers have been introduced as endodontic materials for the root canal. This clinical study tested the use of a new premixed calcium silicate bioceramic sealer in association with the Thermafil warm carrier-based technique (TF). Epoxy-resin-based sealer with the warm carrier-based technique was the control group. Methodology: Healthy consecutive patients (n = 85) requiring 94 root canal treatments were enrolled in this study and assigned to one filling group (Ceraseal-TF n = 47, AH Plus-TF n = 47) in accordance with operator training and best clinical practice. Periapical X-rays were taken preoperatively, after root canal filling and after 6, 12 and 24 months. Two evaluators blindly assessed the periapical index (PAI) and sealer extrusion in the groups (k = 0.90). Healing rate and survival rate were also evaluated. Chi-square tests was used to analyze significant differences between the groups. Multilevel analysis was performed to evaluate the factors associated with healing status. Results: A total of 89 root canal treatments in 82 patients were analyzed at the end-line (24 months). The total drop-out was 3.6% (3 patients; 5 teeth). A total of 91.1% of healed teeth (PAI 1-2) was observed in Ceraseal-TF, with 88.6% in AH Plus-TF. No significant difference was observed on healing outcome and survival among the two filling groups (p > 0.05). Apical extrusion of the sealers occurred in 17 cases (19.0%). Of these, 6 occurred in Ceraseal-TF (13.3%) and 11 in AH Plus-TF (25.0%). Three Ceraseal extrusions were radiographically undetectable after 24 months. All the AH Plus extrusions did not change during the evaluation time. Conclusions: The combined use of the carrier-based technique and premixed CaSi-based bioceramic sealer showed clinical results comparable with carrier-based technique and epoxy-resin-based sealer. The radiographical disappearance of apically extruded Ceraseal is a possible event in the first 24 months.

Extensive literature reports an increase in physical disorders (pain, pathologies, dysfunctions) and mental malaise/uneasiness (stress, burnout) affecting dental professionals in relation to fast and pressing rhythms of work, long working hours, increasingly demanding patients, ever-evolving technologies, etc. This project has been conceived to bring the science of yoga around the world to dental professionals as a preventive (occupational) medicine and to provide knowledge and means for self-care. Yoga is a concentrative self-discipline of the mind, senses, and physical body, that requires regular daily exercise (or meditation), attention, intention, and disciplined action. M&M: The study aimed to design a Yoga protocol specifically devised for dental professionals (dentists, dental hygienists, and dental assistants) including positions (āsana) to be practiced/used in the dental office. The protocol is targeted for the upper body, namely neck, upper back, chest, shoulder girdle, and wrists, being areas greatly affected by work-related musculoskeletal disorders. This paper represents a yoga-based guideline for the self-cure of musculoskeletal disorders among dental professionals. Results: The protocol includes both sitting (Upavistha position) and standing (Utthana or Sama position) āsana, with twisting (Parivrtta), side bending (Parsva), flexion and forward bending (Pashima), and extension and arching (Purva) āsana to mobilize and decompress, and to provide nourishment and oxygen to the musculo-articular system. The paper delivers different concepts and theories developed and deepened by the authors and introduces and spreads yoga as a medical science among dental professionals for the prevention and treatment of work-related musculoskeletal disorders. We articulate notions ranging from stretching out using the vinyāsa method (breath-driven movement) and inward-focused attention to contemplative/concentrative science, interoceptive attention, self-awareness, the mind–body connection, and receptive attitude. The theory of “muscles are bone ties” is coined and delivered with regard to tensegrity musculoskeletal fascial structures connecting, pulling together, and nearing the bone segments where they are anchored. The paper describes over 60 āsana envisaged to be performed on dental stools or using the walls of a dental office or a dental unit chair. A detailed guideline on the work-related disorders that can find relief with the protocol is provided, including the description of breath control for the practice of āsana in vinyāsa. The foundations of the technique reside in the Iyengar Yoga method and Parināma Yoga method. Conclusions: This paper represents a guideline for self-cure in the prevention or treatment of musculoskeletal disorders affecting dental professionals. Yoga is a powerful concentrative self-discipline able to provide physical and mental well-being, representing great help and support in daily life and business for dental professionals. Yógāsana restores retracted and stiff muscles, giving relief to the strained and tired limbs of dental professionals. Yoga is not intended for flexible or physically performing persons but for people who decide to take care of themselves. The practice of specific āsana represents a powerful tool for the prevention or treatment of MSDs related to poor posture, forward head, chronic neck tension (and related headache), depressed chest, compressive disorders on wrists and shoulders as carpal tunnel, impingement syndromes, outlet syndrome, subacromial pain syndrome and spinal disc pathologies. Yoga, as an integrative science in medicine and public health, represents a powerful tool for the prevention and treatment of occupational musculoskeletal disorders and an extraordinary path for the self-care of dental professionals, sitting job workers, and healthcare providers suffering from occupational biomechanical stresses and awkward postures.

Background: The present study aims to analyze the use of Laser-Lok microtextured neck implants placed with a transmucosal surgical approach. The marginal bone level (MBL) and periodontal parameters were evaluated in a cohort prospective 4-year clinical study. Methods: A total of 41 implants were placed in 36 healthy consecutive patients (16 males, 20 females, mean age 60 ± 9 years). Tapered tissue level implants, characterized by a 2.0 mm laser-microtextured neck, were used with a flapless approach. Customized abutments and provisional resin crowns were positioned. Definitive metal–ceramic crowns were cemented approximately 4 months after insertion. Periapical radiographs were taken after 1, 3, 6, 12, 36 and 48 months from implant placement to evaluate MBL. Gingival thickness (thin/thick), plaque score (PS) and bleeding on probing (BoP) were evaluated. Results: After 48 months, all implants were safe from complications. No complications, peri-implantitis, early implant failures or mucositis occurred. The survival rate was 100%. Mean MBL during the follow-up was −0.15 ± 0.18 at T1, −0.29 ± 0.29 at T3, −0.45 ± 0.37 at T6, −0.53 ± 0.45 at T12, −1.06 ± 1.13 at T 36 and −1.10 ± 0.89 at T 48. Implants placed 2–3 months after tooth extraction revealed lower MBL variation when compared to those placed immediately (in fresh extraction sockets) or in completely healed ridges (delayed group). Narrower diameter implants (3.8 mm) showed significantly higher MBL variation when compared to 4.6 diameter implants. Multilevel analysis at T48 revealed that among all the evaluated variables, implant diameter was the factor mostly associated with MBL modifications (p = 0.027). Conclusion: This 4-year clinical study supports the use of Laser-Lok implants placed at tissue level with a flapless approach. A limited bone loss during the 48-month follow-up was observed. Periodontal parameters were stable with no sign of inflammation or soft tissue alteration. The use of Laser-Lok implants with transmucosal surgery represents a suitable technique with a minimally invasive approach.

Aim of the study: to evaluate root filling remnants after secondary root canal treatments (SRCTs) of oval-shaped canals with X-rays and cone beam computed tomography (CBCT). The SRCTs were performed using reciprocating NiTi instruments. Methods: Single-rooted teeth (N = 64) were randomly treated with Reciproc Blue (RB) and filled with AH Plus/single cone (SC group) or AH Plus/Guttafusion (GF group). After seven days of storage in HBSS (Hanks balanced salt solution), Gates Glidden burs #2/3 and RB #25 and #40 were used for the SRCTs. The time to complete the procedure was measured. X-rays and CBCT were used to calculate, respectively, the area and the volume occupied by the remnants in the coronal, middle, and apical thirds of each canal. Environmental scanning electron microscopy (ESEM) and energy dispersive X-ray spectroscopy (EDX) were used for qualitative evaluation and morphology composition of the remnants in sectioned roots. A statistical analysis was performed using Sigma Plot (version 13, IBM, Armonk, NY, USA). The study was designed according to PRILE guidelines. Results: After the SRCTs, the middle thirds of the root canals showed the presence of remnants in both groups, as demonstrated by X-rays and CBCT. The GF group showed a statistically significant higher volume of remnants than the SC Group only in the middle third. The ESEM supported by the EDX revealed the remnant composition by the detection of trace elements of sealer and gutta-percha in all root canals. Conclusion: The study demonstrated that the middle third of root canals is a critical region where remnants were packed and spread in the buccal-lingual sides of canals. ESEM-EDX detected a fine layer of filling remnants in all root thirds, suggesting a larger canal contamination than the X-rays and CBCT examinations revealed.

The aim of the study was to analyze the chemical–physical properties and bioactivity (apatite-forming ability) of three recently introduced premixed bioceramic root canal sealers containing varied amounts of different calcium silicates (CaSi): a dicalcium and tricalcium silicate (1–10% and 20–30%)-containing sealer with zirconium dioxide and tricalcium aluminate (CERASEAL); a tricalcium silicate (5–15%)-containing sealer with zirconium dioxide, dimethyl sulfoxide and lithium carbonate (AH PLUS BIOCERAMIC) and a dicalcium and tricalcium silicate (10% and 25%)-containing sealer with calcium aluminate, tricalcium aluminate and tantalite (NEOSEALER FLO). An epoxy resin-based sealer (AH PLUS) was used as control. The initial and final setting times, radiopacity, flowability, film thickness, open pore volume, water absorption, solubility, calcium release and alkalizing activity were tested. The nucleation of calcium phosphates and/or apatite after 28 days aging in Hanks balanced salt solution (HBSS) was evaluated by ESEM-EDX, vibrational IR and micro-Raman spectroscopy. The analyses showed for NeoSealer Flo and AH Plus the longest final setting times (1344 ± 60 and 1300 ± 60 min, respectively), while shorter times for AH Plus Bioceramic and Ceraseal (660 ± 60 and 720 ± 60 min, respectively). Radiopacity, flowability and film thickness complied with ISO 6876/12 for all tested materials. A significantly higher open pore volume was observed for NeoSealer Flo, AH Plus Bioceramic and Ceraseal when compared to AH Plus (p < 0.05), significantly higher values were observed for NeoSealer Flo and AH Plus Bioceramic (p < 0.05). Ceraseal and AH Plus revealed the lowest solubility. All CaSi-containing sealers released calcium and alkalized the soaking water. After 28 days immersion in HBSS, ESEM-EDX analyses revealed the formation of a mineral layer that covered the surface of all bioceramic sealers, with a lower detection of radiopacifiers (Zirconium for Ceraseal and AH Plus Bioceramic, Tantalum for NeoSealer Flo) and an increase in calcium, phosphorous and carbon. The calcium phosphate (CaP) layer was more evident on NeoSealer Flo and AH Plus Bioceramic. IR and micro-Raman revealed the formation of calcium carbonate on the surface of all set materials. A thin layer of a CaP phase was detected only on AH Plus Bioceramic and NeoSealer Flo. Ceraseal did not show CaP deposit despite its highest calcium release among all the tested CaSi-containing sealers. In conclusion, CaSi-containing sealers met the required chemical and physical standards and released biologically relevant ions. Slight/limited apatite nucleation was observed in relation to the high carbonation processes.

This study aimed to characterize the chemical properties and bioactivity of an endodontic sealer (GuttaFlow Bioseal) based on polydimethylsiloxane (PDMS) and containing a calcium bioglass as a doping agent. Commercial PDMS-based cement free from calcium bioglass (GuttaFlow 2 and RoekoSeal) were characterized for comparison as well as GuttaFlow 2 doped with dicalcium phosphate dihydrate, hydroxyapatite, or a tricalcium silicate-based cement. IR and Raman analyses were performed on fresh materials as well as after aging tests in Hank’s Balanced Salt Solution (28 d, 37 °C). Under these conditions, the strengthening of the 970 cm−1 Raman band and the appearance of the IR components at 1455–1414, 1015, 868, and 600–559 cm−1 revealed the deposition of B-type carbonated apatite. The Raman I970/I638 and IR A1010/A1258 ratios (markers of apatite-forming ability) showed that bioactivity decreased along with the series: GuttaFlow Bioseal > GuttaFlow 2 > RoekoSeal. The PDMS matrix played a relevant role in bioactivity; in GuttaFlow 2, the crosslinking degree was favorable for Ca2+ adsorption/complexation and the formation of a thin calcium phosphate layer. In the less crosslinked RoekoSeal, such processes did not occur. The doped cements showed bioactivity higher than GuttaFlow 2, suggesting that the particles of the mineralizing agents are spontaneously exposed on the cement surface, although the hydrophobicity of the PDMS matrix slowed down apatite deposition. Relevant properties in the endodontic practice (i.e., setting time, radiopacity, apatite-forming ability) were related to material composition and the crosslinking degree.

Recently, regenerative medicine has been attracting interest from scientific groups working on translational applications of applied medical sciences [...]

Aim: This prospective clinical study analyzed the 24-month outcome of conventional apical surgery retro-filled with calcium-silicate cement versus apical surgery with simultaneous orthograde retreatment by means of clinical and radiographic criteria. Materials and methods: This study included 83 teeth affected by persistent periapical lesions in 68 patients. Mean age was 52 years (median = 51 years; range 19–81 years). Twenty-eight cases were treated with apical surgery, 16 cases with apical surgery with simultaneous orthograde retreatment and 39 cases with orthograde retreatment in previously treated teeth established as control group. Periapical index score (PAI) was used as radiographic criteria. Teeth were examined at 6 months, 1 and 2 years and classified as healed (without any symptoms and PAI ≤ 2), healing (without any symptoms and PAI = 3) or diseased (with symptoms or PAI ≥ 4 and not functional) on the basis of radiographic and clinical criteria. At 24 months evaluation, healed and healing were considered as success and diseased and fracture as failure. Multilevel GLM model and an ordered logistic regression as statistical analysis was made with level of significance set at p

Aim: To evaluate cyclic fatigue resistance of different Nickel-Titanium instruments tested with an innovative reciprocating kinematics. Methodology: Eighty Nickel-Titanium reciprocating instruments were tested in cyclic fatigue resistance: WaveOne Primary (n = 20), WaveOne Gold Primary (n = 20), Reciproc R25 (n = 20) and Reciproc Blue R25 (n = 20). The cyclic fatigue of each brand was measured with two different motors and kinematics settings: (1) X-Smart Plus (Denstply Maillefer) used in “WaveOne All” or “Reciproc All” setting, according to manufacturer's instruction; (2) a 4:1 contra-angle (Cefla, Imola, Italy) with an experimental kinematics (Goldspeed EVOE4 – Cefla, Italy) (EVO) with different rotation angles and based on a sinusoidal acceleration. The time to fracture in an artificial stainless-steel canal (90° angle and a 5-mm radius of curvature) was digitally recorded. Mean life, beta (failure rate) and eta (characteristic life i.e. the number of seconds at which 63.2% of the product has failed) were calculated for each group and compared with Weibull analysis. Results: Instruments tested with the kinematics EVO presented higher values of eta in all groups. Reciproc Blue showed the highest eta value (233.05) and Wave One Gold the lower failure probability (46.98%). Wave One instruments showed similar fatigue resistance when tested with EVO or X-Smart. Conclusion: Tested kinematics with different angles and based on sinusoidal reciprocating acceleration had a positive impact on fatigue lifetime of reciprocating instruments. Present findings suggest the possibility of future improvements in the clinical use of reciprocating files. Riassunto: Obiettivi dello studio: Scopo dello studio è stato quello di valutare l’impatto di una nuova cinematica con differenti angoli di rotazione e controrotazione sugli strumenti disegnati per il movimento di reciprocazione. Materiali e Metodi: La fatica ciclica di 80 strumenti NiTi reciprocanti è stata misurata in un canale metallico artificiale con angolo di 90° e con raggio di 5 mm, con diverse cinematiche di reciprocazione.Sono stati testati 8 gruppi di strumenti (n = 10): Gruppo 1: WaveOne Primary in modalità “WaveOne All” utilizzando il motore X-Smart Plus (Dentsply Maillefer); Gruppo 2: WaveOne Gold Primary (Dentsply Maillefer) in “WaveOne All” con X-Smart Plus; Gruppo 3: Reciproc R25 (VDW) in “Reciproc All” con X-Smart Plus; Gruppo 4 Reciproc Blue (VDW) R25 in “Reciproc All” con X-Smart Plus. Altri 4 gruppi degli stessi strumenti sono stati testati utilizzando la nuova cinematica di reciprocazione (EVO E4, Cefla, Imola, Italy) con angoli differenti e basata sul concetto di accelerazione sinusoidale, utilizzando uno specifico motore sperimentale con un contrangolo 4:1 (CEFLA, Imola, Italy). Gruppo 5: WaveOne Primary in modalità “WaveOne” utilizzando il sistema EVO E4 (Cefla); Gruppo 6: WaveOne Gold Primary in “WaveOne” con EVO E4; Gruppo 7: Reciproc R25 in modalità “Reciproc” con EVO E4; Gruppo 8: Reciproc Blue R25 in “Reciproc” con EVO E4.L’analisi statistica Weibull è stata utilizzata per calcolare e confrontare la media (mean life), beta (failure rate) e eta (il numero di secondi cui il 63.2% degli strumenti ha fallito). Risultati: Gli strumenti testati con cinematica EVO E4 hanno dimostrato un tempo medio (mean life) di frattura per fatica ciclica superiore agli strumenti testati con le cinematiche convenzionali di reciprocazione, in ogni gruppo. I Reciproc Blue hanno mostrato i più elevati valori di resistenza (233.05 eta) mentre i WaveOne Gold hanno dimostrato la più bassa probabilità di fallimento (46,98%). Conclusioni: La nuova cinematica di reciprocazione basata su angoli differenti ed accelerazione sinusoidale ha dimostrato avere un impatto positivo sulla resistenza alla fatica ciclica degli strumenti testati. Inoltre è stato confermato che i nuovi trattamenti termici delle leghe migliorano le proprietà meccaniche degli strumenti. I risultati di questo studio aprono nuovi scenari sulle dinamiche di utilizzo dei sistemi reciprocanti ad oggi disponibili. Keywords: Cyclic fatigue, Endodontic instrumentation, Kinematics, Nickel-titanium instruments, Reciprocating motion, Parole chiave: Cinematica, Fatica ciclica, Strumenti Nichel-Titanio, Strumentazione endodontica, Movimento reciprocante

Innovative green, eco-friendly, and biologically derived hydrogels for non-load bearing bone sites were conceived and produced. Natural polysaccharides (copolymers of sodium D-mannuronate and L-guluronate) with natural polypeptides (gelatin) and bioactive mineral fillers (calcium silicates CaSi and dicalcium phosphate dihydrate DCPD) were used to obtain eco-sustainable biomaterials for oral bone defects. Three PP-x:y formulations were prepared (PP-16:16, PP-33:22, and PP-31:31), where PP represents the polysaccharide/polypeptide matrix and x and y represent the weight % of CaSi and DCPD, respectively. Hydrogels were tested for their chemical-physical properties (calcium release and alkalizing activity in deionized water, porosity, solubility, water sorption, radiopacity), surface microchemistry and micromorphology, apatite nucleation in HBSS by ESEM-EDX, FT-Raman, and micro-Raman spectroscopies. The expression of vascular (CD31) and osteogenic (alkaline phosphatase ALP and osteocalcin OCN) markers by mesenchymal stem cells (MSCs) derived from human vascular walls, cultured in direct contact with hydrogels or with 10% of extracts was analysed. All mineral-filled hydrogels, in particular PP-31:31 and PP-33:22, released Calcium ions and alkalized the soaking water for three days. Calcium ion leakage was high at all the endpoints (3 h–28 d), while pH values were high at 3 h–3 d and then significantly decreased after seven days (p < 0.05). Porosity, solubility, and water sorption were higher for PP-31:31 (p < 0.05). The ESEM of fresh samples showed a compact structure with a few pores containing small mineral granules agglomerated in some areas (size 5–20 microns). PP-CTRL degraded after 1–2 weeks in HBSS. EDX spectroscopy revealed constitutional compounds and elements of the hydrogel (C, O, N, and S) and of the mineral powders (Ca, Si and P). After 28 days in HBSS, the mineral-filled hydrogels revealed a more porous structure, partially covered with a thicker mineral layer on PP-31:31. EDX analyses of the mineral coating showed Ca and P, and Raman revealed the presence of B-type carbonated apatite and calcite. MSCs cultured in contact with mineral-filled hydrogels revealed the expression of genes related to vascular (CD31) and osteogenic (mainly OCN) differentiation. Lower gene expression was found when cells were cultured with extracts added to the culture medium. The incorporation of biointeractive mineral powders in a green bio-derived algae-based matrix allowed to produce bioactive porous hydrogels able to release biologically relevant ions and create a suitable micro-environment for stem cells, resulting in interesting materials for bone regeneration and healing in oral bone defects.

Aim: The study aims to assess sealing ability of a novel polydimethylsiloxane-based sealer in simulated wet root canals with wide apex, ion release (calcium and pH) and examine samples using ESEM. Materials and methods: GuttaFlow bioseal, GuttaFlow2, and RoekoSeal Automix (Coltène/Whaledent Inc.) were tested. Roots were prepared to obtain an apical diameter #40 using nickel–titanium rotary files (HyFlex CM, Coltène/Whaledent Inc.), each root was filled with single cone technique and immediately inserted into a simulated socket (filled with 0.02 mL of simulated body fluid) to reproduce the clinical conditions of a wet apical environment. Sealing ability was evaluated as fluid filtration rate at 1, 14, 28 days, and 10 months. After 28 days in simulated body fluid, apices were examined using an Environmental Scanning Electron Microscope (ESEM). Alkalinizing activity and calcium release was evaluated after 3 h and 1, 7, 14, and 28 days. Data were analysed using Kolmogorov–Smirnov test (p

A pulp capping material must perform as a barrier and protect the dental pulpal complex by inducing the formation of a new dentin bridge or dentin-like tissue.Being a favorable condition for the healing process, the apatite forming ability of TheraCal (light-curable Portland-dimethacrylate cement) and Dycal (calcium hydroxide-based) pulp capping materials was studied in two simulated body fluids, i.e. Dulbecco’s Phosphate Buffered Saline (DPBS) and Hank’s Balanced Salt Solution (HBSS). The cements were analyzed before and after soaking in these media for different times (1–28 days) by ESEM-EDX, micro-Raman and IR spectroscopy. This data article refers to “An in vitro study on dentin demineralization and remineralization: collagen rearrangements and influence on the enucleated phase” (Di Foggia et al., 2019).

Tissue regeneration in dentistry has demonstrated impressive progress over during the last decades compared to other medical sciences [...]

The surface topography of dental implants and micro-nano surface characterization have gained particular interest for the improvement of the osseointegration phases. The aim of this study was to evaluate the surface micro-nanomorphology and bioactivity (apatite forming ability) of Ossean® surface, a resorbable blast medium (RBM) blasted surface further processed through the incorporation of a low amount of calcium phosphate. The implants were analyzed using environmental scanning electronic microscopy (ESEM), connected to Energy dispersive X-ray spectroscopy (EDX), field emission gun SEM-EDX (SEM-FEG) micro-Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) before and after immersion in weekly refreshed Hank’s balanced salt solution (HBSS) for 28 days. The analysis of the samples before immersion showed a moderately rough surface, with micropits and microgrooves distributed on all of the surface; EDX microanalysis revealed the constitutional elements of the implant surface, namely titanium (Ti), aluminum (Al) and vanadium (V). Limited traces of calcium (Ca) and phosphorous (P) were detected, attributable to the incorporated calcium phosphate. No traces of calcium phosphate phases were detected by micro-Raman spectroscopy. ESEM analysis of the implant aged in HBSS for 28 days revealed a significantly different surface, compared to the implant before immersion. At original magnifications

Zygomatic implant rehabilitation is a challenging procedure that requires an accurate prosthetic and implant plan. The aim of this study was to evaluate the malar bone available for three-dimensional zygomatic implant placement on the possible trajectories exhibiting optimal occlusal emergence. After a preliminary analysis on 30 computed tomography (CT) scans of dentate patients to identify the ideal implant emergencies, we used 80 CT scans of edentulous patients to create two sagittal planes representing the possible trajectories of the anterior and posterior zygomatic implants. These planes were rotated clockwise on the ideal emergence points and three different hypothetical implant trajectories per zygoma were drawn for each slice. Then, the engageable malar bone and intra- and extra-sinus paths were measured. It was possible to identify the ideal implant emergences via anatomical landmarks with a high predictability. Significant differences were evident between males and females, between implants featuring anterior and those featuring posterior emergences, and between the different trajectories. The use of internal trajectories provided better bone engagement but required a higher intra-sinus path. A significant association was found between higher intra-sinus paths and lower crestal bone heights.

This study aimed to investigate the mineralization and chemical composition of the bone–implant interface and peri-implant tissues on human histological samples using an environmental scanning electron microscope as well as energy-dispersive x-ray spectroscopy (ESEM-EDX) as an innovative method. Eight unloaded implants with marginal bone tissue were retrieved after four months from eight patients and were histologically processed and analyzed. Histological samples were observed under optical microscopy (OM) to identify the microarchitecture of the sample and bone morphology. Then, all samples were observed under ESEM-EDX from the coronal to the most apical portion of the implant at 500x magnification. A region of interest with bone tissue of size 750 × 500 microns was selected to correspond to the first coronal and the last apical thread (ROI). EDX microanalysis was used to assess the elemental composition of the bone tissue along the thread interface and the ROI. Atomic percentages of Ca, P, N, and Ti, and the Ca/N, P/N and Ca/P ratios were measured in the ROI. Four major bone mineralization areas were identified based on the different chemical composition and ratios of the ROI. Area 1: A well-defined area with low Ca/N, P/N, and Ca/P was identified as low-density bone. Area 2: A defined area with higher Ca/N, P/N, and Ca/P, identified as new bone tissue, or bone remodeling areas. Area 3: A well-defined area with high Ca/N, /P/N, and Ca/P ratios, identified as bone tissue or bone chips. Area 4: An area with high Ca/N, P/N, and Ca/P ratios, which was identified as mature old cortical bone. Bone Area 2 was the most represented area along the bone–implant interface, while Bone Area 4 was identified only at sites approximately 1.5 mm from the interface. All areas were identified around implant biopsies, creating a mosaic-shaped distribution with well-defined borders. ESEM-EDX in combination with OM allowed to perform a microchemical analysis and offered new important information on the organic and inorganic content of the bone tissue around implants.

Exosomes derived from mesenchymal stem cells are extracellular vesicles released to facilitate cell communication and function. Recently, polylactic acid (PLA), calcium silicates (CaSi), and dicalcium phosphate dihydrate (DCPD) have been used to produce bioresorbable functional mineral-doped porous scaffolds-through thermally induced phase separation technique, as materials for bone regeneration. The aim of this study was to investigate the effect of mineral-doped PLA-based porous scaffolds enriched with exosome vesicles (EVs) on osteogenic commitment of human adipose mesenchymal stem cells (hAD-MSCs). Two different mineral-doped scaffolds were produced: PLA-10CaSi-10DCPD and PLA-5CaSi-5DCPD. Scaffolds surface micromorphology was investigated by ESEM-EDX before and after 28 days immersion in simulated body fluid (HBSS). Exosomes were deposited on the surface of the scaffolds and the effect of exosome-enriched scaffolds on osteogenic commitment of hAD-MSCs cultured in proximity of the scaffolds has been evaluated by real time PCR. In addition, the biocompatibility was evaluated by direct-contact seeding hAD-MSCs on scaffolds surface-using MTT viability test. In both formulations, ESEM showed pores similar in shape (circular and elliptic) and size (from 10−30 µm diameter). The porosity of the scaffolds decreased after 28 days immersion in simulated body fluid. Mineral-doped scaffolds showed a dynamic surface and created a suitable bone-forming microenvironment. The presence of the mineral fillers increased the osteogenic commitment of hAD-MSCs. Exosomes were easily entrapped on the surface of the scaffolds and their presence improved gene expression of major markers of osteogenesis such as collagen type I, osteopontin, osteonectin, osteocalcin. The experimental scaffolds enriched with exosomes, in particular PLA-10CaSi-10DCPD, increased the osteogenic commitment of MSCs. In conclusion, the enrichment of bioresorbable functional scaffolds with exosomes is confirmed as a potential strategy to improve bone regeneration procedures.

Vascularization is a crucial factor when approaching any engineered tissue. Vascular wall−mesenchymal stem cells are an excellent in vitro model to study vascular remodeling due to their strong angiogenic attitude. This study aimed to demonstrate the angiogenic potential of experimental highly porous scaffolds based on polylactic acid (PLA) or poly-e-caprolactone (PCL) doped with calcium silicates (CaSi) and dicalcium phosphate dihydrate (DCPD), namely PLA-10CaSi-10DCPD and PCL-10CaSi-10DCPD, designed for the regeneration of bone defects. Vascular wall−mesenchymal stem cells (VW-MSCs) derived from pig thoracic aorta were seeded on the scaffolds and the expression of angiogenic markers, i.e. CD90 (mesenchymal stem/stromal cell surface marker), pericyte genes α-SMA (alpha smooth muscle actin), PDGFR-β (platelet-derived growth factor receptor-β), and NG2 (neuron-glial antigen 2) was evaluated. Pure PLA and pure PCL scaffolds and cell culture plastic were used as controls (3D in vitro model vs. 2D in vitro model). The results clearly demonstrated that the vascular wall mesenchymal cells colonized the scaffolds and were metabolically active. Cells, grown in these 3D systems, showed the typical gene expression profile they have in control 2D culture, although with some main quantitative differences. DNA staining and immunofluorescence assay for alpha-tubulin confirmed a cellular presence on both scaffolds. However, VW-MSCs cultured on PLA-10CaSi-10DCPD showed an individual cells growth, whilst on PCL-10CaSi-10DCPD scaffolds VW-MSCs grew in spherical clusters. In conclusion, vascular wall mesenchymal stem cells demonstrated the ability to colonize PLA and PCL scaffolds doped with CaSi-DCPD for new vessels formation and a potential for tissue regeneration.

Abstract Objective This study aimed to analyze the following physicochemical properties: radiopacity, final setting time, calcium release, pH change, solubility, water sorption, porosity, surface morphology, and apatite-forming ability of two calcium silicate-based materials. Material and methods We tested MTA Repair HP and MTA Vitalcem in comparison with conventional MTA, analyzing radiopacity and final setting time. Water absorption, interconnected pores and apparent porosity were measured after 24-h immersion in deionized water at 37°C. Calcium and pH were tested up to 28 d in deionized water. We analyzed data using two-way ANOVA with Student-Newman-Keuls tests (p

Human periapical cyst mesenchymal stem cells (hPCy-MSCs) are a newly discovered cell population innovatively collected from inflammatory periapical cysts. The use of this biological waste guarantees a source of stem cells without any impact on the surrounding healthy tissues, presenting a valuable potential in tissue engineering and regenerative medicine applications. In the present study, hPCy-MSCs were collected, isolated, and seeded on three experimental mineral-doped porous scaffolds produced by the thermally-induced phase-separation (TIPS) technique. Mineral-doped scaffolds, composed of polylactic acid (PLA), dicalcium phosphate dihydrate (DCPD), and/or hydraulic calcium silicate (CaSi), were produced by TIPS (PLA-10CaSi, PLA-5CaSi-5DCPD, PLA-10CaSi-10DCPD). Micro-CT analysis evaluated scaffolds micromorphology. Collected hPCy-MSCs, characterized by cytofluorimetry, were seeded on the scaffolds and tested for cell proliferation, cells viability, and gene expression for osteogenic and odontogenic differentiation (DMP-1, OSC, RUNX-2, HPRT). Micro-CT revealed an interconnected highly porous structure for all the scaffolds, similar total porosity with 99% open pores. Pore wall thickness increased with the percentage of CaSi and DCPD. Cells seeded on mineral-doped scaffolds showed a superior proliferation compared to pure PLA scaffolds (control), particularly on PLA-10CaSi-10DCPD at day 12. A higher number of non-viable (red stained) cells was observable on PLA scaffolds at days 14 and 21. DMP-1 expression increased in hPCy-MSCs cultured on all mineral-doped scaffolds, in particular on PLA-5CaSi-5DCPD and PLA-10CaSi-10DCPD. In conclusion, the innovative combination of experimental scaffolds colonized with autologous stem cells from periapical cyst represent a promising strategy for regenerative healing of periapical and alveolar bone.

Aim: Calcium silicate-based materials are hydraulic self-setting materials with physico-chemical properties suitable for endodontic surgery and good biological/clinical outcomes. The study aim was to evaluate the bio-properties (biointeractivity and apatite-forming ability) and selected physical properties (porosity, water sorption, solubility, and setting time) of Biodentine, a tricalcium silicate material for endodontics and restorative dentistry, compared to that of ProRoot MTA (Mineral Trioxide Aggregate) as gold standard material. Methods: Biodentine and ProRoot MTA pastes were prepared and analyzed for calcium release and alkalinizing activity (3 h–28 days), setting time, water sorption, porosity, solubility, surface microstructure and composition, and apatite-forming ability in simulated body fluid. Results: Biodentine showed higher calcium release, alkalinizing activity, and solubility but higher open and apparent porosity, water sorption, and a markedly shorter setting time. Calcium phosphate (CaP) deposits were noted on material surfaces after short ageing times. A CaP coating composed of spherulites was detected after 28 days. The thickness, continuity, and Ca/P ratio of the coating differed markedly between the materials. Biodentine showed a coating composed by denser but smaller spherulites, while ProRoot MTA showed large but less dense aggregates of spherulitic deposits. Conclusions: Biodentine showed a pronounced ability to release calcium and extended alkalinizing activity interlinked with its noticeable porosity, water sorption, and solubility: open porosities provide a broad wet biointeractive surface for the release of the calcium and hydroxyl ions involved in the formation of a CaP mineral. Biodentine is a biointeractive tricalcium silicate material with interesting chemical-physical properties and represents a fast-setting alternative to the conventional calcium silicate MTA-like cements.

The aim of the study was to investigate the effects of several decalcifying agents used as irrigant solutions in endodontic treatment on collagen and mineral components of dentin. Coronal dentin discs from five caries-free human third molars with a smear layer were treated for one minute with a chelating solution (1% Ethylenediaminetetraacetic acid (EDTA), 10% EDTA, 17% EDTA, 10% citric acid). Mineralization degree (Ca/N and P/N atomic ratios, IR Iapatite/Iamide II and I1410(carbonate)/I554(phosphate) spectroscopic ratios) and possible collagen rearrangements (collagen infrared (IR) amide II e III shifts) were evaluated by environmental scanning electron microscopy (ESEM)/energy dispersive X-ray spectroscopy (EDX) and IR spectroscopy before and after treatment (T0) and after ageing (T24h and T2m) in simulated body fluid (SBF). At T0, analysis showed that the highest demineralizing effect was achieved using a 10% citric acid solution and 10% EDTA, while the smallest effect was observed when using 17% EDTA. No significant collagen modifications were detected upon treatment with 1% EDTA, while subtle changes were observed after the other treatments. At T24h or T2m, analyses showed the highest remineralization values for 1% EDTA and the lowest for 10% citric acid, mainly at T2m. The samples treated with 17% EDTA showed slight collagen rearrangements upon remineralization. In conclusion, the highest demineralizing effect was observed for 10% EDTA and 10% citric acid. Collagen rearrangement was found for all the treatments except for 1% EDTA. The highest remineralization capability in SBF values was recorded for 1% EDTA and the lowest for 10% citric acid. A slight collagen rearrangement upon remineralization was still present in 17% EDTA-treated samples. Clinical use as a chelating agent in the endodontic therapy of citric acid and concentrated EDTA solutions should be reconsidered.

Introduction: Ca(OH)2-containing/forming materials are conventionally used for indirect pulp-capping and are theoretically able to release Ca2+ and OH- ions for hydrolytic dissociation. However, no evidence exists for ion diffusion through the remaining coronal dentin. The aim of this study was to design an innovative experimental set-up to test the ability of Ca(OH)2-containing and Ca(OH)2-forming pulp-capping materials to generate pulpward Ca2+ and OH- ion fluxes through coronal dentin after indirect pulp-capping in vitro. Materials and Methods: Standardized class 1 cavities were prepared in erupted sound human molars. Pulp tissue was excised. A coronal Remaining Dentin Thickness (RTD) (1±0.2 mm thick) was prepared within an occlusal-to-pulp cavity system (coronal RD system). The whole system/sample was treated with 17% EDTA to remove the smear layer and the external surface was covered by nail varnish. Indirect pulp-capping was performed on coronal RDT using a conventional pulp-capping material covered by a glass ionomer cement, a composite and nail varnish. Chemically different Ca(OH)2 materials were used to test the reliability of the set-up. The leached Ca2+ and OH- ions were measured using ion-selective electrodes after soaking for 3 hours, 24 hours, and 7 days in deionized water (10 mL, 37°C). Results: Calcium ions were detected and a rise in pH was observed in the treated water after a few hours for all tested materials. Conclusion: The experimental set-up proved to be an easy and effective method for testing the different Ca(OH)2-containing and Ca(OH)2-forming materials ability to induce a pulpward flux of calcium and hydroxyl ions through coronal remaining dentin after indirect pulp-capping. The new system will allow the screening of current pulp-capping materials.