Search

Substantial amounts of phenolic aldehydes, represented by the structures of syringaldehyde, vanillin, and 4-hydroxybenzaldehyde, are emitted to the atmosphere during biomass burning. The oxidative transformation of phenolic aldehydes during atmospheric transport has the potential to modify the physicochemical properties of particulates, which play a vital role in Earth's climate and human health. Herein, thin solid films made of syringaldehyde, vanillin, and 4-hydroxybenzaldehyde are oxidized in contact with O

The heterogeneous reaction between thin films of catechol exposed to O

Abundant substituted catechols are emitted to, and created in, the atmosphere during wildfires and anthropogenic combustion and agro-industrial processes. While ozone (O

Potassium is used extensively as a promoter with iron catalysts in Fisher–Tropsch synthesis, water–gas shift reactions, steam reforming, and alcohol synthesis. In this paper, the identification of potassium chemical states on the surface of iron catalysts is studied to improve our understanding of the catalytic system. Herein, potassium-doped iron oxide (α-Fe2O3) nanomaterials are synthesized under variable calcination temperatures (400–800 °C) using an incipient wetness impregnation method. The synthesis also varies the content of potassium nitrate deposited on superfine iron oxide with a diameter of 3 nm (Nanocat®) to reach atomic ratios of 100 Fe:x K (x = 0–5). The structure, composition, and properties of the synthesized materials are investigated by X-ray diffraction, differential scanning calorimetry, thermogravimetric analysis, Fourier-transform infrared, Raman spectroscopy, inductively coupled plasma-atomic emission spectroscopy, and X-ray photoelectron spectroscopy, as well as transmission electron microscopy, with energy-dispersive X-ray spectroscopy and selected area electron diffraction. The hematite phase of iron oxide retains its structure up to 700 °C without forming any new mixed phase. For compositions as high as 100 Fe:5 K, potassium nitrate remains stable up to 400 °C, but at 500 °C, it starts to decompose into nitrites and, at only 800 °C, it completely decomposes to potassium oxide (K2O) and a mixed phase, K2Fe22O34. The doping of potassium nitrate on the surface of α-Fe2O3 provides a new material with potential applications in Fisher–Tropsch catalysis, photocatalysis, and photoelectrochemical processes.

Biomass burning emissions contain abundant phenolic aldehydes (e.g., syringaldehyde, vanillin, and 4-hydroxybenaldehyde) that are oxidized during atmospheric transport, altering the physicochemical properties of particulates. Herein, the oxidative processing of thin films made of syringaldehyde, vanillin, and 4-hydroxybenaldehyde is studied at the air-solid interface under a variable O

Solid waste components can be recycled in waste paper and cardboard sorting plants (WPCSP) through a multistep process. This work collected 15 samples every six days from each of the 9 points selected to study the processes taking place in a WPCSP (135 particulate matter samples total). Examining the concentration and size fraction of particulate matter (i.e., PM

Despite recent literature reporting the remarkable electrochemical CO2 reduction reaction (CO2RR) performance of nitrogen-doped graphitic carbon materials (sp2-carbon) and nitrogen-doped diamond materials (sp3-carbon), no systematic studies have been conducted on the catalytic activities of hybrid carbon nanomaterials between diamond and graphitic extremes. In this study, nitrogen-doped ultra-nanocrystalline diamond thin films were prepared by a microwave-assisted chemical vapor deposition technique. The ratio of sp2-carbon phase to sp3-carbon phase was controlled by varying growth conditions. Our results confirm that nitrogen-doped sp2-carbon (graphitic) rich electrodes have better selectivity for the CO2RR products over the nitrogen-doped sp3-carbon rich electrodes, indicating that the host structure of nitrogen dopants is crucial for the catalytic activity. Nitrogen-doped sp2-carbon electrodes present Faradaic efficiency for CO production up to 82% with excellent activity and selectivity. The vital role of the host structure and the potential catalytic sites were detailed by density functional theory (DFT) calculations.

Iron-driven secondary brown carbon formation reactions from water-soluble organics in cloud droplets and aerosols create insoluble and soluble products of emerging atmospheric importance. This work shows, for the first time, results on dark iron-catalyzed polymerization of catechol forming insoluble black polycatechol particles and colored water-soluble oligomers under conditions characteristic of viscous multicomponent aerosol systems with relatively high ionic strength (I = 1-12 m) and acidic pH (∼2). These systems contain ammonium sulfate (AS)/nitrate (AN) and C3-C5 dicarboxylic acids, namely, malonic, malic, succinic, and glutaric acids. Using dynamic light scattering (DLS) and ultra high pressure liquid chromatography-mass spectrometry (UHPLC-MS), we show results on the rate of particle growth/agglomeration and identity of soluble oligomeric reaction products. We found that increasing I above 1 m and adding diacids with oxygen-to-carbon molar ratio (O:C > 1) significantly reduced the rate of polycatechol formation/aggregation by a factor of 1.3 ± 0.4 in AS solution in the first 60 min of reaction time. Using AN, rates were too slow to be quantified using DLS, but particles formed after 24 h reaction time. These results were explained by the relative concentration and affinity of ligands to Fe(III). We also report detectable amounts of soluble and colored oligomers in reactions with a slow rate of polycatechol formation, including organonitrogen compounds. These results highlight that brown carbon formation from iron chemistry is efficient under a wide range of aerosol physical states and chemical composition.

The quantification of atmospheric gases with small unmanned aerial systems (sUAS) is expanding the ability to safely perform environmental monitoring tasks and quickly evaluate the impact of technologies. In this work, a calibrated sUAS is used to quantify the emissions of ammonia (NH3) gas from the exit stack a 0.1 MWth pilot-scale carbon capture system (CCS) employing a 5 M monoethanolamine (MEA) solvent to scrub CO2 from coal combustion flue gas. A comparison of the results using the sUAS against the ion chromatography technique with the EPA CTM-027 method for the standard emission sampling of NH3 shows good agreement. Therefore, the work demonstrates the usefulness of sUAS as an alternative method of emission measurement, supporting its application in lieu of traditional sampling techniques to collect real time emission data.

Biomass burning releases highly reactive methoxyphenols into the atmosphere, which can undergo heterogeneous oxidation and act as precursors for secondary organic aerosol (SOA) formation. Understanding the reactivity of such methoxyphenols at the air-water interface is a matter of major atmospheric interest. Online electrospray ionization mass spectrometry (OESI-MS) is used here to study the oxidation of two methoxyphenols among three phenolic aldehydes, 4-hydroxybenzaldehyde, vanillin, and syringaldehyde, on the surface of water. The OESI-MS results together with cyclic voltammetry measurements at variable pH are integrated into a mechanism describing the heterogeneous oxidative processing of methoxyphenols by gaseous ozone (O

In July 2018, unmanned aerial systems (UAS) were deployed to measure the properties of lower atmosphere within the San Luis Valley, an elevated valley in Colorado, USA as part of the Lower Atmospheric Profiling Studies at Elevation – a Remotely-piloted Aircraft Team Experiment (LAPSE-RATE). Measurement objectives included detailing boundary-layer transition, canyon cold-air drainage, and convection initiation within the valley. Details of the contribution to LAPSE-RATE made by University of Kentucky are provided here, which include measurements by seven different fixed-wing and rotorcraft UAS totaling over 178 flights with validated data. The data from these coordinated UAS flights consist of thermodynamic and kinematic variables (air temperature, humidity, pressure, wind speed and direction) and include vertical profiles up to 900 m above the ground level and horizontal transects up to 1500 m in length. These measurements have been quality controlled and are openly available in the Zenodo LAPSE-RATE community data repository (https://zenodo.org/communities/lapse-rate/), with the University of Kentucky data available at https://doi.org/10.5281/zenodo.3701845 (Bailey et al., 2020).

How primordial metabolic networks such as the reverse tricarboxylic acid (rTCA) cycle and clay mineral catalysts coevolved remains a mystery in the puzzle to understand the origin of life. While prebiotic reactions from the rTCA cycle were accomplished via photochemistry on semiconductor minerals, the synthesis of clays was demonstrated at low temperature and ambient pressure catalyzed by oxalate. Herein, the crystallization of clay minerals is catalyzed by succinate, an example of a photoproduced intermediate from central metabolism. The experiments connect the synthesis of sauconite, a model for clay minerals, to prebiotic photochemistry. We report the temperature, pH, and concentration dependence on succinate for the synthesis of sauconite identifying new mechanisms of clay formation in surface environments of rocky planets. The work demonstrates that seeding induces nucleation at low temperatures accelerating the crystallization process. Cryogenic and conventional transmission electron microscopies, X-ray diffraction, diffuse reflectance Fourier transformed infrared spectroscopy, and measurements of total surface area are used to build a three-dimensional representation of the clay. These results suggest the coevolution of clay minerals and early metabolites in our planet could have been facilitated by sunlight photochemistry, which played a significant role in the complex interplay between rocks and life over geological time.

Small unmanned aircraft systems (sUAS) are rapidly transforming atmospheric research. With the advancement of the development and application of these systems, improving knowledge of best practices for accurate measurement is critical for achieving scientific goals. We present results from an intercomparison of atmospheric measurement data from the Lower Atmospheric Process Studies at Elevation&mdash, a Remotely piloted Aircraft Team Experiment (LAPSE-RATE) field campaign. We evaluate a total of 38 individual sUAS with 23 unique sensor and platform configurations using a meteorological tower for reference measurements. We assess precision, bias, and time response of sUAS measurements of temperature, humidity, pressure, wind speed, and wind direction. Most sUAS measurements show broad agreement with the reference, particularly temperature and wind speed, with mean value differences of 1.6 &plusmn, 2 . 6 ∘ C and 0.22 &plusmn, 0 . 59 m/s for all sUAS, respectively. sUAS platform and sensor configurations were found to contribute significantly to measurement accuracy. Sensor configurations, which included proper aspiration and radiation shielding of sensors, were found to provide the most accurate thermodynamic measurements (temperature and relative humidity), whereas sonic anemometers on multirotor platforms provided the most accurate wind measurements (horizontal speed and direction). We contribute both a characterization and assessment of sUAS for measuring atmospheric parameters, and identify important challenges and opportunities for improving scientific measurements with sUAS.

The sunlight photochemistry of the organic chromophore pyruvic acid (PA) in water generates ketyl and acetyl radicals that contribute to the production and processing of atmospheric aerosols. The photochemical mechanism is highly sensitive to dissolved oxygen content, [O2(aq)], among other environmental conditions. Thus, herein we investigate the photolysis (&lambda, &ge, 305 nm) of 10&ndash, 200 mM PA at pH 1.0 in water covering the relevant range 0 &le, [O2(aq)] &le, 1.3 mM. The rapid consumption of dissolved oxygen by the intermediate photolytic radicals is monitored in real time with a dissolved oxygen electrode. In addition, the rate of O2(aq) consumption is studied at air flow rates from 30.0 to 900.0 mL min&minus, 1. For the range of [PA]0 covered under air saturated conditions and 30 mL min&minus, 1 flow of air in this setup, the estimated half-lives of O2(aq) consumed by the photolytic radicalsfall within the interval from 22 to 3 min. Therefore, the corresponding depths of penetration of O2(g) into water (x = 4.3 and 1.6 &micro, m) are determined, suggesting that accumulation and small coarse mode aqueous particles should not be O2-depleted in the presence of sunlight photons impinging this kind of chromophore. These photochemical results are of major tropospheric relevance for understanding the formation and growth of secondary organic aerosol.

The reductive tricarboxylic acid (rTCA) cycle is an important central biosynthetic pathway that fixes CO2 into carboxylic acids. Among the five reductive steps in the rTCA cycle, the two-electron reduction of fumarate to succinate proceeds nonenzymatically on the surface of photoexcited sphalerite (ZnS) colloids suspended in water. This model reaction is chosen to systematically study the surface photoprocess occurring on ZnS in the presence of [Na2S] (1–10 mM) hole scavenger at 15 °C. Experiments at variable pH (5–10) indicate that monodissociated fumaric acid is the primary electron acceptor forming the monoprotic form of succinic acid. The following reaction scheme is proposed: (1) photoexcitation of ZnS generates conduction band electrons and valence band holes, (2) the hole scavenger donates electrons while producing sulfur-containing intermediates en route to sulfate formation, (3) a first electron transfer occurs at the conduction band converting chemisorbed monoprotic fumaric acid at surface zinc ...

The multiple modes of SARS-CoV-2 transmission including airborne, droplet, contact, and fecal–oral transmissions that cause coronavirus disease 2019 (COVID-19) contribute to a public threat to the lives of people worldwide. Herein, different databases are reviewed to evaluate modes of transmission of SARS-CoV-2 and study the effects of negative pressure ventilation, air conditioning system, and related protection approaches of this virus. Droplet transmission was commonly reported to occur in particles with diameter >5 µm that can quickly settle gravitationally on surfaces (1–2 m). Instead, fine and ultrafine particles (airborne transmission) can stay suspended for an extended period of time (≥2 h) and be transported further, e.g., up to 8 m through simple diffusion and convection mechanisms. Droplet and airborne transmission of SARS-CoV-2 can be limited indoors with adequate ventilation of rooms, by routine disinfection of toilets, using negative pressure rooms, using face masks, and maintaining social distancing. Other preventive measures recommended include increasing the number of screening tests of suspected carriers of SARS-CoV-2, reducing the number of persons in a room to minimize sharing indoor air, and monitoring people’s temperature before accessing a building. The work reviews a body of literature supporting the transmission of SARS-CoV-2 through air, causing COVID-19 disease, which requires coordinated worldwide strategies.

Aerosols of variable composition, size, and shape are associated with public health concerns as well as with light-particle interactions that play a role in the energy balance of the atmosphere. Photochemical reactions of 2-oxocarboxylic acids in the aqueous phase are now known to contribute to the total secondary organic aerosol (SOA) budget. This work explores the cross reaction of glyoxylic acid (GA) and pyruvic acid (PA) in water, the two most abundant 2-oxocarboxylic acids in the atmosphere, under solar irradiation and dark thermal aging steps. During irradiation, PA and GA are excited and initiate proton-coupled electron transfer or hydrogen abstraction and α-cleavage reactions, respectively. The time series of photoproducts is studied by ion chromatography (IC) with conductivity and electrospray ionization (ESI) mass spectrometry (MS) detection, direct ESI-MS analysis in the negative ion mode, and nuclear magnetic resonance spectroscopy (NMR). The use of one-dimensional (1H and 13C NMR) and two-dim...

The formation of secondary organic aerosol (SOA) from the oxidation of β-pinene via nitrate radicals is investigated in the Georgia Tech Environmental Chamber (GTEC) facility. Aerosol yields are determined for experiments performed under both dry (relative humidity (RH) < 2 %) and humid (RH = 50 % and RH = 70 %) conditions. To probe the effects of peroxy radical (RO2) fate on aerosol formation, "RO2 + NO3 dominant" and "RO2 + HO2 dominant" experiments are performed. Gas-phase organic nitrate species (with molecular weights of 215, 229, 231, and 245 amu, which likely correspond to molecular formulas of C10H17NO4, C10H15NO5, C10H17NO5, and C10H15NO6, respectively) are detected by chemical ionization mass spectrometry (CIMS) and their formation mechanisms are proposed. The NO+ (at m/z 30) and NO2+ (at m/z 46) ions contribute about 11 % to the combined organics and nitrate signals in the typical aerosol mass spectrum, with the NO+ : NO2+ ratio ranging from 4.8 to 10.2 in all experiments conducted. The SOA yields in the "RO2 + NO3 dominant" and "RO2 + HO2 dominant" experiments are comparable. For a wide range of organic mass loadings (5.1–216.1 μg m−3), the aerosol mass yield is calculated to be 27.0–104.1 %. Although humidity does not appear to affect SOA yields, there is evidence of particle-phase hydrolysis of organic nitrates, which are estimated to compose 45–74 % of the organic aerosol. The extent of organic nitrate hydrolysis is significantly lower than that observed in previous studies on photooxidation of volatile organic compounds in the presence of NOx. It is estimated that about 90 and 10 % of the organic nitrates formed from the β-pinene+NO3 reaction are primary organic nitrates and tertiary organic nitrates, respectively. While the primary organic nitrates do not appear to hydrolyze, the tertiary organic nitrates undergo hydrolysis with a lifetime of 3–4.5 h. Results from this laboratory chamber study provide the fundamental data to evaluate the contributions of monoterpene + NO3 reaction to ambient organic aerosol measured in the southeastern United States, including the Southern Oxidant and Aerosol Study (SOAS) and the Southeastern Center for Air Pollution and Epidemiology (SCAPE) study.

Reply to Comment on "Reactivity of Ketyl and Acetyl Radicals from Direct Solar Actinic Photolysis of Aqueous Pyruvic Acid"

How primordial metabolic networks such as the reverse tricarboxylic acid (rTCA) cycle and clay mineral catalysts coevolved remains a mystery in the puzzle to understand the origin of life. While prebiotic reactions from the rTCA cycle were accomplished via photochemistry on semiconductor minerals, the synthesis of clays was demonstrated at low temperature and ambient pressure catalyzed by oxalate. Herein, the crystallization of clay minerals is catalyzed by succinate, an example of a photoproduced intermediate from central metabolism. The experiments connect the synthesis of sauconite, a model for clay minerals, to prebiotic photochemistry. We report the temperature, pH, and concentration dependence on succinate for the synthesis of sauconite identifying new mechanisms of clay formation in surface environments of rocky planets. The work demonstrates that seeding induces nucleation at low temperatures accelerating the crystallization process. Cryogenic and conventional transmission electron microscopies, X-ray diffraction, diffuse reflectance Fourier transformed infrared spectroscopy, and measurements of total surface area are used to build a three-dimensional representation of the clay. These results suggest the coevolution of clay minerals and early metabolites in our planet could have been facilitated by sunlight photochemistry, which played a significant role in the complex interplay between rocks and life over geological time.

Anthropogenic activities contribute benzene, toluene, and anisole to the environment, which in the atmosphere are converted into the respective phenols, cresols, and methoxyphenols by fast gas-phase reaction with hydroxyl radicals (HO•). Further processing of the latter species by HO• decreases their vapor pressure as a second hydroxyl group is incorporated to accelerate their oxidative aging at interfaces and in aqueous particles. This work shows how catechol, pyrogallol, 3-methylcatechol, 4-methylcatechol, and 3-methoxycatechol (all proxies for oxygenated aromatics derived from benzene, toluene, and anisole) react at the air–water interface with increasing O3(g) during τc ≈ 1 μs contact time and contrasts their potential for electron transfer and in situ production of HO• using structure–activity relationships. A unifying mechanism is provided to explain the oxidation of the five proxies, which includes the generation of semiquinone radicals. Functionalization in the presence of HO• results in the forma...

Oxidation of biogenic volatile organic compounds (BVOC) by the nitrate radical (NO3) represents one of the important interactions between anthropogenic emissions related to combustion and natural emissions from the biosphere. This interaction has been recognized for more than 3 decades, during which time a large body of research has emerged from laboratory, field, and modeling studies. NO3-BVOC reactions influence air quality, climate and visibility through regional and global budgets for reactive nitrogen (particularly organic nitrates), ozone, and organic aerosol. Despite its long history of research and the significance of this topic in atmospheric chemistry, a number of important uncertainties remain. These include an incomplete understanding of the rates, mechanisms, and organic aerosol yields for NO3-BVOC reactions, lack of constraints on the role of heterogeneous oxidative processes associated with the NO3 radical, the difficulty of characterizing the spatial distributions of BVOC and NO3 within the poorly mixed nocturnal atmosphere, and the challenge of constructing appropriate boundary layer schemes and non-photochemical mechanisms for use in state-of-the-art chemical transport and chemistry–climate models. This review is the result of a workshop of the same title held at the Georgia Institute of Technology in June 2015. The first half of the review summarizes the current literature on NO3-BVOC chemistry, with a particular focus on recent advances in instrumentation and models, and in organic nitrate and secondary organic aerosol (SOA) formation chemistry. Building on this current understanding, the second half of the review outlines impacts of NO3-BVOC chemistry on air quality and climate, and suggests critical research needs to better constrain this interaction to improve the predictive capabilities of atmospheric models.

The photoreduction of CO2 to formate (HCOO–) in sphalerite (ZnS) aqueous suspensions is systematically studied in the presence of Na2S hole scavenger. A series of cut-on filters at λcut-on ≥ 280, 295, 305, 320, and 400 nm are used to measure the reaction rate of formate production. The dependence of the measured reaction rates on λcut-on indicates that a wavelength of λ = 345 nm is associated with the actual bandgap of the semiconductor nanocrystallites suspended in water. The results from apparent quantum yield measurements during periodic illumination experiments suggest that (1) valence-band holes on the surface of ZnS disappear within deciseconds due to the oxidation of the scavenger while simultaneously pumping electrons to the conduction band, (2) excited electrons in the conduction band of ZnS are transferred to CO2 to produce the intermediate CO2•–, and (3) CO2•– abstracts a proton from water and undergoes further photoreduction on the surface of ZnS in an overall time scale for steps 2 + 3 of a f...

Carbon dioxide(CO2) is the principal greenhouse gas contributing to global warming and climate change. Therefore, it is imperative to develop advanced methods and technologies to sequestrate or convert CO2 in the atmosphere. Recently, renewable energy driven electrochemical CO2 conversion has emerged as a promising route to convert CO2 into usable chemicals and fuels. Previous studies have shown that metal-free, hetero-atom-doped carbon-based electrodes are cost-effective and durable electrocatalyst for the reduction of CO2. However, studies related to co-heteroatom-doped carbon materials are marginal. These co-doped carbon catalysts lower the activation energy barriers of electrochemical CO2 reduction reaction(CO2RR) pathways by synergistically tuning the binding energies of CO2 molecules and the intermediates adsorbed on the active sites on the catalyst. In this work, for the first time, both nitrogen(N) and sulfur(S) co-doped carbon nano-onions(CNOs) were investigated for CO2RR. CNOs are comprised of several fullerene-like carbon shells. The size of a CNO is typically below 10 nm. They have high electrical conductivity and large external surface area. Furthermore, the highly curved graphitic shell in CNOs shifts the electron density of graphene to the outer surface. This electron density enables the adsorption of reactants: thus, CNOs are ideal for catalytic applications. In the present work, CNOs doped with N, S, as well as both N and S are systematically compared. The electrochemical tests were performed in an aqueous electrolyte by using a customized electrochemical cell. Products from the electrochemical reactions were characterized by gas chromatography and nuclear magnetic resonance spectroscopy. N doped CNOs(NCNOs) generated formic acid as the primary product(Maxium~50 % faradaic efficiency(FE) at -0.6 V vs. RHE). On the other hand, both N and S co-doped CNOs(NS-CNOs) produced carbon monoxide(CO) as a major product(Maximum~ 85% FE at -0.4V vs. RHE). The onset potential for the formation of CO was assessed by employing in-situ rotation ring disk electrode(RRDE) measurements. These measurements revealed that NS-CNOs could convert CO2 to CO at -0.20 V vs. RHE, close to its thermodynamic potential(-0.10 V vs. RHE). Finally, the stability of NS-CNOs were tested with an electrochemical setup equipped with a gas diffusion electrode(GDE). NS-CNOs on GDE maintained ~80 % FE at -0.4 V vs. RHE giving ~1.5 mA cm-2 current density for 8 hours. X-ray photoelectron spectroscopic measurements were conducted for elemental and chemical state analysis. The morphology and microstructure of each doped catalyst, in particular, chemical structure related to heteroatom dopants, were revealed by high resolution scanning transmission electron microscopy. For Density functional theory(DFT) calculations, model structures of doped CNOs were built based on the findings of XPS and TEM characterizations. Then the DFT calculations were performed to understand the relationship between catalytic activity and the nature of the N and S environment on CNOs, and thereby viable electrochemical pathways of CO2RR were evaluated. Our results indicate that the electronic effect of N dopant and the geometric effect of S dopant in combination with the curvature of CNOs lead to a synergistic effect to catalyze CO2RR at low over-potential. These findings provide invaluable insights in developing efficient, selective and metal-free carbon-based catalysts for CO2RR. Figure 1

Halides are incorporated into aerosol sea spray, where they start the catalytic destruction of ozone (O3) over the oceans and affect the global troposphere. Two intriguing environmental problems undergoing continuous research are (1) to understand how reactive gas phase molecular halogens are directly produced from inorganic halides exposed to O3 and (2) to constrain the environmental factors that control this interfacial process. This paper presents a laboratory study of the reaction of O3 at variable iodide (I(-)) concentration (0.010-100 μM) for solutions aerosolized at 25 °C, which reveal remarkable differences in the reaction intermediates and products expected in sea spray for low tropospheric [O3]. The ultrafast oxidation of I(-) by O3 at the air-water interface of microdroplets is evidenced by the appearance of hypoiodous acid (HIO), iodite (IO2(-)), iodate (IO3(-)), triiodide (I3(-)), and molecular iodine (I2). Mass spectrometry measurements reveal an enhancement (up to 28%) in the dissolution of gaseous O3 at the gas-liquid interface when increasing the concentration of NaI or NaBr from 0.010 to 100 μM. The production of iodine species such as HIO and I2 from NaI aerosolized solutions exposed to 50 ppbv O3 can occur at the air-water interface of sea spray, followed by their transfer to the gas-phase, where they contribute to the loss of tropospheric ozone.

Aerosols affect climate change, the energy balance of the atmosphere, and public health due to their variable chemical composition, size, and shape. While the formation of secondary organic aerosols (SOA) from gas phase precursors is relatively well understood, studying aqueous chemical reactions contributing to the total SOA budget is the current focus of major attention. Field measurements have revealed that mono-, di-, and oxo-carboxylic acids are abundant species present in SOA and atmospheric waters. This work explores the fate of one of these 2-oxocarboxylic acids, glyoxylic acid, which can photogenerate reactive species under solar irradiation. Additionally, the dark thermal aging of photoproducts is studied by UV-visible and fluorescence spectroscopies to reveal that the optical properties are altered by the glyoxal produced. The optical properties display periodicity in the time domain of the UV-visible spectrum of chromophores with absorption enhancement (thermochromism) or loss (photobleaching) during nighttime and daytime cycles, respectively. During irradiation, excited state glyoxylic acid can undergo α-cleavage or participate in hydrogen abstractions. The use of (13)C nuclear magnetic resonance spectroscopy (NMR) analysis shows that glyoxal is an important intermediate produced during direct photolysis. Glyoxal quickly reaches a quasi-steady state as confirmed by UHPLC-MS analysis of its corresponding (E) and (Z) 2,4-dinitrophenylhydrazones. The homolytic cleavage of glyoxylic acid is proposed as a fundamental step for the production of glyoxal. Both carbon oxides, CO2(g) and CO(g) evolving to the gas-phase, are quantified by FTIR spectroscopy. Finally, formic acid, oxalic acid, and tartaric acid photoproducts are identified by ion chromatography (IC) with conductivity and electrospray (ESI) mass spectrometry (MS) detection and (1)H NMR spectroscopy. A reaction mechanism is proposed based on all experimental observations.

The production of secondary organic aerosol (SOA) by the dark ozonolysis of gas-phase β-caryophyllene was studied. The experiments were conducted in a continuous-flow environmental chamber for organic particle mass concentrations of 0.5 to 30 μg m−3 and with ozone in excess, thereby allowing the study of second-generation particle-phase products under atmospherically relevant conditions. The particle-phase products were characterized by an ultra-performance liquid chromatograph equipped with an electrospray ionization time-of-flight mass spectrometer (UPLC-ESI-ToF-MS). Fragmentation mass spectra were used for the structural elucidation of each product, and the structures were confirmed as consistent with the accurate m/z values of the parent ions. In total, fifteen products were identified. Of these, three are reported for the first time. The structures showed that 9 out of 15 particle-phase products were second generation, including all three of the new products. The relative abundance of the second-generation products was approximately 90% by mass among the 15 observed products. The O:C and H:C elemental ratios of the 15 products ranged from 0.13 to 0.50 and from 1.43 to 1.60, respectively. Fourteen of the products contained 3 to 5 oxygen atoms. A singular product, which was one of the three newly identified ones, had 7 oxygen atoms, including 1 carboxylic group, 2 carbonyl groups, and 3 hydroxyl groups. It was identified as 2, 3-dihydroxy-4-[2-(4-hydroxy-3-oxobutyl)-3, 3-dimethylcyclobutyl]-4-oxobutanoic acid (C14H22O7). The estimated saturation vapor pressure of this product is 3.3×10−13 Pa, making this product a candidate contributor to new particle formation in the atmosphere.

Heterogeneous photocatalysis is a prominent area of research with major applications in solar energy conversion, air pollution mitigation, and removal of contaminants from water. A large number of scientific papers related to the photocatalysis field and its environmental applications are published in different journals specializing in materials and nanomaterials. However, many problems exist in the conception of papers by authors unfamiliar with standard characterization methods of photocatalysts as well as with the procedures needed to determine photocatalytic activities based on the determination of “apparent quantum efficiencies” within a wavelength interval or “apparent quantum yields” in the case of using monochromatic light. In this regard, an astonishing number of recent research articles include claims of highly efficient (photo)catalysts or similar terms about materials with superior or enhanced efficiency for a given reaction without proper experimental support. Consequently, the comparison of the efficiencies of photocatalysts may result as being meaningless, especially when reports are only based on expressions determining (1) a reaction rate per weight of catalyst or its surface area, (2) quantum efficiencies or quantum yields, and (3) turnover frequencies or turnover numbers. Herein, we summarize the standards needed for reporting valuable data in photocatalysis and highlight some common discrepancies found in the literature. This work should inform researchers interested in reporting photocatalysis projects about the correct procedures for collecting experimental data and properly characterizing the materials by providing examples and key supporting literature.

A reductive tricarboxylic acid (rTCA) cycle could have fixed carbon dioxide as biochemically useful energy-storage molecules on early Earth. Nonenzymatic chemical pathways for some steps of the rTCA cycle, however, such as the production of the alpha-ketocarboxylic acids pyruvate and alpha-ketoglutarate, remain a challenging problem for the viability of the proposed prebiotic cycle. As a class of compounds, alpha-ketocarboxylic acids have high free energies of formation that disfavor their production. We report herein the production of pyruvate from lactate and of alpha-ketoglutarate from pyruvate in the millimolar concentration range as promoted by ZnS mineral photoelectrochemistry. Pyruvate is produced from the photooxidation of lactate with 70% yield and a quantum efficiency of 0.009 at 15 degrees C across the wavelength range of 200-400 nm. The produced pyruvate undergoes photoreductive back reaction to lactate at a 30% yield and with a quantum efficiency of 0.0024. Pyruvate alternatively continues in photooxidative forward reaction to alpha-ketoglutarate with a 50% yield and a quantum efficiency of 0.0036. The remaining 20% of the carbon follows side reactions that produce isocitrate, glutarate, and succinate. Small amounts of acetate are also produced. The results of this study suggest that alpha-ketocarboxylic acids produced by mineral photoelectrochemistry could have participated in a viable enzyme-free cycle for carbon fixation in an environment where light, sulfide minerals, carbon dioxide, and other organic compounds interacted on prebiotic Earth.